-
Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
A. Abada
, et al. (1439 additional authors not shown)
Abstract:
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;…
▽ More
In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase.
FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible.
FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes.
This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I…
▽ More
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region.
The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors
Authors:
M. Benedikt,
F. Zimmermann,
B. Auchmann,
W. Bartmann,
J. P. Burnet,
C. Carli,
A. Chancé,
P. Craievich,
M. Giovannozzi,
C. Grojean,
J. Gutleber,
K. Hanke,
A. Henriques,
P. Janot,
C. Lourenço,
M. Mangano,
T. Otto,
J. Poole,
S. Rajagopalan,
T. Raubenheimer,
E. Todesco,
L. Ulrici,
T. Watson,
G. Wilkinson,
P. Azzi
, et al. (1439 additional authors not shown)
Abstract:
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.…
▽ More
Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme.
△ Less
Submitted 25 April, 2025;
originally announced May 2025.
-
Report on the ECFA Early-Career Researchers Debate on the 2020 European Strategy Update for Particle Physics
Authors:
N. Andari,
L. Apolinário,
K. Augsten,
E. Bakos,
I. Bellafont,
L. Beresford,
A. Bethani,
J. Beyer,
L. Bianchini,
C. Bierlich,
B. Bilin,
K. L. Bjørke,
E. Bols,
P. A. Brás,
L. Brenner,
E. Brondolin,
P. Calvo,
B. Capdevila,
I. Cioara,
L. N. Cojocariu,
F. Collamati,
A. de Wit,
F. Dordei,
M. Dordevic,
T. A. du Pree
, et al. (96 additional authors not shown)
Abstract:
A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the E…
▽ More
A group of Early-Career Researchers (ECRs) has been given a mandate from the European Committee for Future Accelerators (ECFA) to debate the topics of the current European Strategy Update (ESU) for Particle Physics and to summarise the outcome in a brief document [1]. A full-day debate with 180 delegates was held at CERN, followed by a survey collecting quantitative input. During the debate, the ECRs discussed future colliders in terms of the physics prospects, their implications for accelerator and detector technology as well as computing and software. The discussion was organised into several topic areas. From these areas two common themes were particularly highlighted by the ECRs: sociological and human aspects; and issues of the environmental impact and sustainability of our research.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
Observation of the decay $\mathrm{Z}\toψ\,\ell^+\ell^-\toμ^+μ^-\ell^+\ell^-$ with the CMS detector
Authors:
S. Leontsinis
Abstract:
The observation of the $\mathrm{Z}$ boson rare decay to a $ψ$ meson and two oppositely charged same-flavour leptons, $\ell^+ \ell^-$, where $ψ$ represents the sum of $\mathrm{J}/ψ$ and $ψ(\mathrm{2S})\to\mathrm{J}/ψ\, X$, and $\ell=μ,\mathrm{e}$, is presented. The data sample used corresponds to an integrated luminosity of $35.9\,\mathrm{fb}^{-1}$ of proton-proton collisions at a center-of-mass en…
▽ More
The observation of the $\mathrm{Z}$ boson rare decay to a $ψ$ meson and two oppositely charged same-flavour leptons, $\ell^+ \ell^-$, where $ψ$ represents the sum of $\mathrm{J}/ψ$ and $ψ(\mathrm{2S})\to\mathrm{J}/ψ\, X$, and $\ell=μ,\mathrm{e}$, is presented. The data sample used corresponds to an integrated luminosity of $35.9\,\mathrm{fb}^{-1}$ of proton-proton collisions at a center-of-mass energy of $13\,\mathrm{TeV}$ accumulated by the CMS experiment at the LHC. The signal is observed with a significance in excess of 5 standard deviations. Removing contributions from $ψ(\mathrm{2S})$ decays to $\mathrm{J}/ψ$, the signal is interpreted as being entirely from $\mathrm{Z}\to\mathrm{J}/ψ\,\ell^+\ell^-$, with its fiducial branching fraction relative to that of the decay $\mathrm{Z}\toμ^+μ^-μ^+μ^-$ measured to be $$\frac{\mathcal{B}(\mathrm{Z}\to\mathrm{J}/ψ\,\ell^+\ell^-)}{\mathcal{B}(\mathrm{Z}\toμ^+μ^-μ^+μ^-)}=0.70\pm 0.18\, \mathrm{(stat)} \pm 0.05\, \mathrm{(syst)}.$$ This result is obtained with the assumption of no $\mathrm{J}/ψ$ polarisation, where extreme polarisation scenarios can create $-24\%$ to $+22\%$ variations.
△ Less
Submitted 14 May, 2018;
originally announced May 2018.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Identification of circles from datapoints using Gaussian sums
Authors:
T. Alexopoulos,
G. Iakovidis,
S. Leontsinis,
K. Ntekas,
V. Polychronakos
Abstract:
We present a pattern recognition method which use datapoints on a plane and estimates the parameters of a circle. MC data are generated in order to test the method's efficiency over noise hits, uncertainty in the hits positions and number of datapoints. The scenario were the hits from a quadrant of the circle are missing is also considered. The method proposed is proven to be robust, accurate and…
▽ More
We present a pattern recognition method which use datapoints on a plane and estimates the parameters of a circle. MC data are generated in order to test the method's efficiency over noise hits, uncertainty in the hits positions and number of datapoints. The scenario were the hits from a quadrant of the circle are missing is also considered. The method proposed is proven to be robust, accurate and very efficient.
△ Less
Submitted 22 March, 2014; v1 submitted 18 March, 2014;
originally announced March 2014.
-
New Physics searches in heavy flavours in ATLAS
Authors:
Stefanos Leontsinis
Abstract:
Precision determinations of the flavour sector allow the search for indirect new physics signatures. At the forefront of these studies are the determinations of interference of new physics with known $\upDelta F=1$ and $\upDelta F=2$ processes. The ATLAS collaboration explores this area with competitive results measuring the CP violating phase $φ_s$ from $B^0_s\to J/ψφ$ decays and investigating ra…
▽ More
Precision determinations of the flavour sector allow the search for indirect new physics signatures. At the forefront of these studies are the determinations of interference of new physics with known $\upDelta F=1$ and $\upDelta F=2$ processes. The ATLAS collaboration explores this area with competitive results measuring the CP violating phase $φ_s$ from $B^0_s\to J/ψφ$ decays and investigating rare $B$ decays with dileptons in the final state with data collected at the Large Hadron Collider. In this paper, the latest ATLAS results relevant for new physics searches in the heavy flavour sector will be discussed.
△ Less
Submitted 19 November, 2013; v1 submitted 12 November, 2013;
originally announced November 2013.
-
Examining the Geometric Mean Method for the Extraction of Spatial Resolution
Authors:
T. Alexopoulos,
G. Iakovidis,
S. Leontsinis,
K. Ntekas,
V. Polychronakos
Abstract:
The spatial resolution of a detector, using a reference detector telecscope, can be measured applying the geometric mean method, with tracks reconstructed from hits of all the detectors, including ($σ_\mathrm{in}$) and excluding ($σ_\mathrm{ex}$) the hit from the detector under study. The geometric mean of the two measured resolution values ($σ=\sqrt{σ_\mathrm{ex}σ_\mathrm{in}}$), is proposed to p…
▽ More
The spatial resolution of a detector, using a reference detector telecscope, can be measured applying the geometric mean method, with tracks reconstructed from hits of all the detectors, including ($σ_\mathrm{in}$) and excluding ($σ_\mathrm{ex}$) the hit from the detector under study. The geometric mean of the two measured resolution values ($σ=\sqrt{σ_\mathrm{ex}σ_\mathrm{in}}$), is proposed to provide a more accurate estimate of the intrinsic detector resolution. This method has been tested using a Monte Carlo algorithm and is proven to give accurate results, independently of the distance between the detectors used for the track fitting. The method does not give meaningful results if all the detectors do not carry the same characteristics.
△ Less
Submitted 8 January, 2014; v1 submitted 11 November, 2013;
originally announced November 2013.
-
Performance Studies of a Micromegas Chamber in the ATLAS Environment
Authors:
Y. Kataoka,
S. Leontsinis,
K. Ntekas
Abstract:
Five small prototype micromegas detectors were positioned in the ATLAS detector during Large Hadron Collider running at $\sqrt{s} = 7$ and $8\, \mathrm{TeV}$. A $9\times 4.5\, \mathrm{cm^2}$ double drift gap detector was placed in front of the electromagnetic calorimeter and four $9\times 10\, \mathrm{cm^2}$ detectors on the ATLAS Small Wheel, the first station of the forward muon spectrometer. Th…
▽ More
Five small prototype micromegas detectors were positioned in the ATLAS detector during Large Hadron Collider running at $\sqrt{s} = 7$ and $8\, \mathrm{TeV}$. A $9\times 4.5\, \mathrm{cm^2}$ double drift gap detector was placed in front of the electromagnetic calorimeter and four $9\times 10\, \mathrm{cm^2}$ detectors on the ATLAS Small Wheel, the first station of the forward muon spectrometer. The one attached to the calorimeter was exposed to interaction rates of about $70\,\mathrm{kHz}/\mathrm{cm^2}$ at $\mathcal{L}=5\times 10^{33}\,\mathrm{cm^{-2}s^{-1}}$ two orders of magnitude higher than the rates in the Small Wheel. We present the results from performance studies carried out using data collected with these detectors and we also compare the currents drawn by the detector installed in front of the electromagnetic calorimeter with the luminosity measurement in ATLAS.
△ Less
Submitted 20 January, 2014; v1 submitted 31 October, 2013;
originally announced October 2013.
-
Ageing studies of resistive Micromegas detectors for the HL-LHC
Authors:
J. Galan,
D. Attie,
E. Ferrer-Ribas,
A. Giganon,
I. Giomataris,
S. Herlant,
F. Jeanneau,
A. Peyaud,
Ph. Schune,
T. Alexopoulos,
M. Byszewski,
G. Iakovidis,
P. Iengo,
K. Ntekas,
S. Leontsinis,
R. de Oliveira,
Y. Tsipolitis,
J. Wotschack
Abstract:
Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to asse…
▽ More
Resistive-anode Micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working in high flux and high radiations environment like in the HL-LHC (ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiations (X-rays, cold neutrons, 60 Co gammas) up to an equivalent HL-LHC time of more than five years without showing any degradation of the performances in terms of gain and energy resolution. Beam test studies took place in October 2012 to assess the tracking performances (efficiency, spatial resolution,...). Results of ageing studies and beam test performances are reported in this paper.
△ Less
Submitted 7 April, 2013;
originally announced April 2013.
-
An ageing study of resistive micromegas for the HL-LHC environment
Authors:
J. Galán,
D. Attié,
E. Ferrer-Ribas,
A. Giganon,
I. Giomataris,
S. Herlant,
F. Jeanneau,
A. Peyaud,
Ph. Schune,
T. Alexopoulos,
M. Byszewski,
G. Iakovidis,
P. Iengo,
K. Ntekas,
S. Leontsinis,
R. de Oliveira,
Y. Tsipolitis,
J. Wotschack
Abstract:
Resistive-anode micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working at high flux and high ionizing radiation like in the HL-LHC (up to ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to as…
▽ More
Resistive-anode micromegas detectors are in development since several years, in an effort to solve the problem of sparks when working at high flux and high ionizing radiation like in the HL-LHC (up to ten times the luminosity of the LHC). They have been chosen as one of the technologies that will be part of the ATLAS New Small Wheel project (forward muon system). An ageing study is mandatory to assess their capabilities to handle the HL-LHC environment on a long-term period. A prototype has been exposed to several types of irradiation (X-rays, cold neutrons, $^{60}$Co gammas and alphas) above the equivalent charge produced at the detector in five HL-LHC running years without showing any degradation of the performances in terms of gain and energy resolution. This study has been completed with the characterization of the tracking performances in terms of efficiency and spatial resolution, verifying the compatibility of results obtained with both resistive micromegas detectors, irradiated and non-irradiated one.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
