-
Study of tau neutrinos and non-unitary neutrino mixing with the first six detection units of KM3NeT/ORCA
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati Gualandi,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee
, et al. (252 additional authors not shown)
Abstract:
Oscillations of atmospheric muon and electron neutrinos produce tau neutrinos with energies in the GeV range, which can be observed by the ORCA detector of the KM3NeT neutrino telescope in the Mediterranean Sea. First measurements with ORCA6, an early subarray corresponding to about 5$\%$ of the final detector, are presented. A sample of 5828 neutrino candidates has been selected from the analysed…
▽ More
Oscillations of atmospheric muon and electron neutrinos produce tau neutrinos with energies in the GeV range, which can be observed by the ORCA detector of the KM3NeT neutrino telescope in the Mediterranean Sea. First measurements with ORCA6, an early subarray corresponding to about 5$\%$ of the final detector, are presented. A sample of 5828 neutrino candidates has been selected from the analysed exposure of 433 kton-years. The $ν_τ$ normalisation, defined as the ratio between the number of observed and expected tau neutrino events, is measured to be $S_τ= 0.48^{+0.5}_{-0.33}$. This translates into a $ν_τ$ charged-current cross section measurement of $σ_τ^{\text{meas}} = (2.5 ^{+2.6}_{-1.8}) \times 10^{-38}$ cm$^{2}$ nucleon$^{-1}$ at the median $ν_τ$ energy of 20.3 GeV. The result is consistent with the measurements of other experiments. In addition, the current limit on the non-unitarity parameter affecting the $τ$-row of the neutrino mixing matrix was improved, with $α_{33}>$ 0.95 at the 95$\%$ confidence level.
△ Less
Submitted 30 April, 2025; v1 submitted 3 February, 2025;
originally announced February 2025.
-
Probing invisible neutrino decay with the first six detection units of KM3NeT/ORCA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati Gualandi,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee,
V. Bertin
, et al. (251 additional authors not shown)
Abstract:
In the era of precision measurements of neutrino oscillation parameters, it is necessary for experiments to disentangle discrepancies that may indicate physics beyond the Standard Model in the neutrino sector. KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study the oscillations of atmospheric n…
▽ More
In the era of precision measurements of neutrino oscillation parameters, it is necessary for experiments to disentangle discrepancies that may indicate physics beyond the Standard Model in the neutrino sector. KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study the oscillations of atmospheric neutrinos and determine the neutrino mass ordering. This paper focuses on the initial configuration of ORCA, referred to as ORCA6, which comprises six out of the foreseen 115 detection units of photosensors. A high-purity neutrino sample was extracted during 2020 and 2021, corresponding to an exposure of 433 kton-years. This sample is analysed following a binned log-likelihood approach to search for invisible neutrino decay, in a three-flavour neutrino oscillation scenario, where the third neutrino mass state $ν_3$ decays into an invisible state, e.g. a sterile neutrino. The resulting best fit of the invisible neutrino decay parameter is $α_3 = 0.92^{+1.08}_{-0.57}\times 10^{-4}~\mathrm{eV^2}$, corresponding to a scenario with $θ_{23}$ in the second octant and normal neutrino mass ordering. The results are consistent with the Standard Model, within a $2.1\,σ$ interval.
△ Less
Submitted 17 March, 2025; v1 submitted 20 January, 2025;
originally announced January 2025.
-
Search for non-standard neutrino interactions with the first six detection units of KM3NeT/ORCA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee,
V. Bertin
, et al. (239 additional authors not shown)
Abstract:
KM3NeT/ORCA is an underwater neutrino telescope under construction in the Mediterranean Sea. Its primary scientific goal is to measure the atmospheric neutrino oscillation parameters and to determine the neutrino mass ordering. ORCA can constrain the oscillation parameters $Δm^{2}_{31}$ and $θ_{23}$ by reconstructing the arrival direction and energy of multi-GeV neutrinos crossing the Earth. Searc…
▽ More
KM3NeT/ORCA is an underwater neutrino telescope under construction in the Mediterranean Sea. Its primary scientific goal is to measure the atmospheric neutrino oscillation parameters and to determine the neutrino mass ordering. ORCA can constrain the oscillation parameters $Δm^{2}_{31}$ and $θ_{23}$ by reconstructing the arrival direction and energy of multi-GeV neutrinos crossing the Earth. Searches for deviations from the Standard Model of particle physics in the forward scattering of neutrinos inside Earth matter, produced by Non-Standard Interactions, can be conducted by investigating distortions of the standard oscillation pattern of neutrinos of all flavours. This work reports on the results of the search for non-standard neutrino interactions using the first six detection units of ORCA and 433 kton-years of exposure. No significant deviation from standard interactions was found in a sample of 5828 events reconstructed in the 1 GeV$-$1 TeV energy range. The flavour structure of the non-standard coupling was constrained at 90\% confidence level to be $|\varepsilon_{μτ} | \leq 5.4 \times 10^{-3}$, $|\varepsilon_{eτ} | \leq 7.4 \times 10^{-2}$, $|\varepsilon_{eμ} | \leq 5.6 \times 10^{-2}$ and $-0.015 \leq \varepsilon_{ττ} - \varepsilon_{μμ} \leq 0.017$. The results are comparable to the current most stringent limits placed on the parameters by other experiments.
△ Less
Submitted 22 January, 2025; v1 submitted 28 November, 2024;
originally announced November 2024.
-
gSeaGen code by KM3NeT: an efficient tool to propagate muons simulated with CORSIKA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee
, et al. (238 additional authors not shown)
Abstract:
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gS…
▽ More
The KM3NeT Collaboration has tackled a common challenge faced by the astroparticle physics community, namely adapting the experiment-specific simulation software to work with the CORSIKA air shower simulation output. The proposed solution is an extension of the open source code gSeaGen, which allows the transport of muons generated by CORSIKA to a detector of any size at an arbitrary depth. The gSeaGen code was not only extended in terms of functionality but also underwent a thorough redesign of the muon propagation routine, resulting in a more accurate and efficient simulation. This paper presents the capabilities of the new gSeaGen code as well as prospects for further developments.
△ Less
Submitted 29 April, 2025; v1 submitted 31 October, 2024;
originally announced October 2024.
-
Search for quantum decoherence in neutrino oscillations with six detection units of KM3NeT/ORCA
Authors:
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit,
E. Berbee
, et al. (237 additional authors not shown)
Abstract:
Neutrinos described as an open quantum system may interact with the environment which introduces stochastic perturbations to their quantum phase. This mechanism leads to a loss of coherence along the propagation of the neutrino $-$ a phenomenon commonly referred to as decoherence $-$ and ultimately, to a modification of the oscillation probabilities. Fluctuations in space-time, as envisaged by var…
▽ More
Neutrinos described as an open quantum system may interact with the environment which introduces stochastic perturbations to their quantum phase. This mechanism leads to a loss of coherence along the propagation of the neutrino $-$ a phenomenon commonly referred to as decoherence $-$ and ultimately, to a modification of the oscillation probabilities. Fluctuations in space-time, as envisaged by various theories of quantum gravity, are a potential candidate for a decoherence-inducing environment. Consequently, the search for decoherence provides a rare opportunity to investigate quantum gravitational effects which are usually beyond the reach of current experiments. In this work, quantum decoherence effects are searched for in neutrino data collected by the KM3NeT/ORCA detector from January 2020 to November 2021. The analysis focuses on atmospheric neutrinos within the energy range of a few GeV to $100\,\mathrm{GeV}$. Adopting the open quantum system framework, decoherence is described in a phenomenological manner with the strength of the effect given by the parameters $Γ_{21}$ and $Γ_{31}$. Following previous studies, a dependence of the type $Γ_{ij} \propto (E/E_0)^n$ on the neutrino energy is assumed and the cases $n = -2,-1$ are explored. No significant deviation with respect to the standard oscillation hypothesis is observed. Therefore, $90\,\%$ CL upper limits are estimated as $Γ_{21} < 4.6\cdot 10^{-21}\,$GeV and $Γ_{31} < 8.4\cdot 10^{-21}\,$GeV for $n = -2$, and $Γ_{21} < 1.9\cdot 10^{-22}\,$GeV and $Γ_{31} < 2.7\cdot 10^{-22}\,$GeV for $n = -1$, respectively.
△ Less
Submitted 3 October, 2024; v1 submitted 2 October, 2024;
originally announced October 2024.
-
Measurement of neutrino oscillation parameters with the first six detection units of KM3NeT/ORCA
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
A. R. Alhebsi,
M. Alshamsi,
S. Alves Garre,
A. Ambrosone,
F. Ameli,
M. Andre,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardačová,
B. Baret,
A. Bariego-Quintana,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
M. Bennani,
D. M. Benoit
, et al. (238 additional authors not shown)
Abstract:
KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study oscillations of atmospheric neutrinos and determine the neutrino mass ordering. This paper focuses on an initial configuration of ORCA, referred to as ORCA6, which comprises six out of the foreseen 115 detection units of photo-sensors. A high-…
▽ More
KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study oscillations of atmospheric neutrinos and determine the neutrino mass ordering. This paper focuses on an initial configuration of ORCA, referred to as ORCA6, which comprises six out of the foreseen 115 detection units of photo-sensors. A high-purity neutrino sample was extracted, corresponding to an exposure of 433 kton-years. The sample of 5828 neutrino candidates is analysed following a binned log-likelihood method in the reconstructed energy and cosine of the zenith angle. The atmospheric oscillation parameters are measured to be $\sin^2θ_{23}= 0.51^{+0.04}_{-0.05}$, and $ Δm^2_{31} = 2.18^{+0.25}_{-0.35}\times 10^{-3}~\mathrm{eV^2} \cup \{-2.25,-1.76\}\times 10^{-3}~\mathrm{eV^2}$ at 68\% CL. The inverted neutrino mass ordering hypothesis is disfavoured with a p-value of 0.25.
△ Less
Submitted 4 October, 2024; v1 submitted 13 August, 2024;
originally announced August 2024.
-
MoMEMta, a modular toolkit for the Matrix Element Method at the LHC
Authors:
Sébastien Brochet,
Christophe Delaere,
Brieuc François,
Vincent Lemaître,
Alexandre Mertens,
Alessia Saggio,
Miguel Vidal Marono,
Sébastien Wertz
Abstract:
The Matrix Element Method has proven to be a powerful method to optimally exploit the information available in detector data. Its widespread use is nevertheless impeded by its complexity and the associated computing time. MoMEMta, a C++ software package to compute the integrals at the core of the method, provides a versatile implementation of the Matrix Element Method to both the theory and experi…
▽ More
The Matrix Element Method has proven to be a powerful method to optimally exploit the information available in detector data. Its widespread use is nevertheless impeded by its complexity and the associated computing time. MoMEMta, a C++ software package to compute the integrals at the core of the method, provides a versatile implementation of the Matrix Element Method to both the theory and experiment communities. Its modular structure covers the needs of experimental analysis workflows at the LHC without compromising ease of use on simpler and smaller simulated samples used for phenomenological studies. With respect to existing tools, MoMEMta improves on usability and flexibility. In this paper, we present version 1.0 of MoMEMta, together with examples illustrating the wide range of applications at the LHC accessible for the first time with a single tool.
△ Less
Submitted 19 February, 2019; v1 submitted 22 May, 2018;
originally announced May 2018.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
DELPHES 3, A modular framework for fast simulation of a generic collider experiment
Authors:
J. de Favereau,
C. Delaere,
P. Demin,
A. Giammanco,
V. Lemaître,
A. Mertens,
M. Selvaggi
Abstract:
The version 3.0 of the DELPHES fast-simulation is presented. The goal of DELPHES is to allow the simulation of a multipurpose detector for phenomenological studies. The simulation includes a track propagation system embedded in a magnetic field, electromagnetic and hadron calorimeters, and a muon identification system. Physics objects that can be used for data analysis are then reconstructed from…
▽ More
The version 3.0 of the DELPHES fast-simulation is presented. The goal of DELPHES is to allow the simulation of a multipurpose detector for phenomenological studies. The simulation includes a track propagation system embedded in a magnetic field, electromagnetic and hadron calorimeters, and a muon identification system. Physics objects that can be used for data analysis are then reconstructed from the simulated detector response. These include tracks and calorimeter deposits and high level objects such as isolated electrons, jets, taus, and missing energy. The new modular approach allows for greater flexibility in the design of the simulation and reconstruction sequence. New features such as the particle-flow reconstruction approach, crucial in the first years of the LHC, and pile-up simulation and mitigation, which is needed for the simulation of the LHC detectors in the near future, have also been implemented. The DELPHES framework is not meant to be used for advanced detector studies, for which more accurate tools are needed. Although some aspects of DELPHES are hadron collider specific, it is flexible enough to be adapted to the needs of electron-positron collider experiments.
△ Less
Submitted 21 March, 2014; v1 submitted 24 July, 2013;
originally announced July 2013.
-
Automation of the matrix element reweighting method
Authors:
P. Artoisenet,
V. Lemaître,
F. Maltoni,
O. Mattelaer
Abstract:
Matrix element reweighting is a powerful experimental technique widely employed to maximize the amount of information that can be extracted from a collider data set. We present a procedure that allows to automatically evaluate the weights for any process of interest in the standard model and beyond. Given the initial, intermediate and final state particles, and the transfer functions for the final…
▽ More
Matrix element reweighting is a powerful experimental technique widely employed to maximize the amount of information that can be extracted from a collider data set. We present a procedure that allows to automatically evaluate the weights for any process of interest in the standard model and beyond. Given the initial, intermediate and final state particles, and the transfer functions for the final physics objects, such as leptons, jets, missing transverse energy, our algorithm creates a phase-space mapping designed to efficiently perform the integration of the squared matrix element and the transfer functions. The implementation builds up on MadGraph, it is completely automatized and publicly available. A few sample applications are presented that show the capabilities of the code and illustrate the possibilities for new studies that such an approach opens up.
△ Less
Submitted 1 February, 2011; v1 submitted 19 July, 2010;
originally announced July 2010.
-
High energy photon interactions at the LHC
Authors:
J. de Favereau de Jeneret,
V. Lemaitre,
Y. Liu,
S. Ovyn,
T. Pierzchala,
K. Piotrzkowski,
X. Rouby,
N. Schul,
M. Vander Donckt
Abstract:
Experimental prospects for studying high-energy photon-photon and photon-proton interactions at the CERN Large Hadron Collider (LHC) are discussed. Cross sections are calculated for many electroweak and beyond the Standard Model processes. Selection strategies based on photon interaction tagging techniques are studied. Assuming a typical LHC multipurpose detector, various signals and their irred…
▽ More
Experimental prospects for studying high-energy photon-photon and photon-proton interactions at the CERN Large Hadron Collider (LHC) are discussed. Cross sections are calculated for many electroweak and beyond the Standard Model processes. Selection strategies based on photon interaction tagging techniques are studied. Assuming a typical LHC multipurpose detector, various signals and their irreducible backgrounds are presented after applying acceptance cuts. Prospects are discussed for the Higgs boson search, detection of supersymmetric particles and of anomalous quartic gauge couplings, as well as for the top quark physics.
△ Less
Submitted 14 August, 2009;
originally announced August 2009.
-
Delphes, a framework for fast simulation of a generic collider experiment
Authors:
S. Ovyn,
X. Rouby,
V. Lemaitre
Abstract:
This paper presents a new C++ framework, DELPHES, performing a fast multipurpose detector response simulation. The simulation includes a tracking system, embedded into a magnetic field, calorimeters and a muon system, and possible very forward detectors arranged along the beamline. The framework is interfaced to standard file formats (e.g. Les Houches Event File or HepMC) and outputs observables s…
▽ More
This paper presents a new C++ framework, DELPHES, performing a fast multipurpose detector response simulation. The simulation includes a tracking system, embedded into a magnetic field, calorimeters and a muon system, and possible very forward detectors arranged along the beamline. The framework is interfaced to standard file formats (e.g. Les Houches Event File or HepMC) and outputs observables such as isolated leptons, missing transverse energy and collection of jets which can be used for dedicated analyses. The simulation of the detector response takes into account the effect of magnetic field, the granularity of the calorimeters and subdetector resolutions. A simplified preselection can also be applied on processed events for trigger emulation. Detection of very forward scattered particles relies on the transport in beamlines with the HECTOR software. Finally, the FROG 2D/3D event display is used for visualisation of the collision final states.
△ Less
Submitted 8 April, 2010; v1 submitted 12 March, 2009;
originally announced March 2009.
-
The FP420 R&D Project: Higgs and New Physics with forward protons at the LHC
Authors:
M. G. Albrow,
R. B. Appleby,
M. Arneodo,
G. Atoian,
I. L. Azhgirey,
R. Barlow,
I. S. Bayshev,
W. Beaumont,
L. Bonnet,
A. Brandt,
P. Bussey,
C. Buttar,
J. M. Butterworth,
M. Carter,
B. E. Cox,
D. Dattola,
C. Da Via,
J. de Favereau,
D. d'Enterria,
P. De Remigis,
A. De Roeck,
E. A. De Wolf,
P. Duarte,
J. R. Ellis,
B. Florins
, et al. (73 additional authors not shown)
Abstract:
We present the FP420 R&D project, which has been studying the key aspects of the development and installation of a silicon tracker and fast-timing detectors in the LHC tunnel at 420 m from the interaction points of the ATLAS and CMS experiments. These detectors would measure precisely very forward protons in conjunction with the corresponding central detectors as a means to study Standard Model…
▽ More
We present the FP420 R&D project, which has been studying the key aspects of the development and installation of a silicon tracker and fast-timing detectors in the LHC tunnel at 420 m from the interaction points of the ATLAS and CMS experiments. These detectors would measure precisely very forward protons in conjunction with the corresponding central detectors as a means to study Standard Model (SM) physics, and to search for and characterise New Physics signals. This report includes a detailed description of the physics case for the detector and, in particular, for the measurement of Central Exclusive Production, pp --> p + phi + p, in which the outgoing protons remain intact and the central system phi may be a single particle such as a SM or MSSM Higgs boson. Other physics topics discussed are gamma-gamma and gamma-p interactions, and diffractive processes. The report includes a detailed study of the trigger strategy, acceptance, reconstruction efficiencies, and expected yields for a particular p p --> p H p measurement with Higgs boson decay in the b-bbar mode. The document also describes the detector acceptance as given by the LHC beam optics between the interaction points and the FP420 location, the machine backgrounds, the new proposed connection cryostat and the moving ("Hamburg") beam-pipe at 420 m, and the radio-frequency impact of the design on the LHC. The last part of the document is devoted to a description of the 3D silicon sensors and associated tracking performances, the design of two fast-timing detectors capable of accurate vertex reconstruction for background rejection at high-luminosities, and the detector alignment and calibration strategy.
△ Less
Submitted 2 January, 2009; v1 submitted 2 June, 2008;
originally announced June 2008.
-
Collider aspects of flavour physics at high Q
Authors:
T. Lari,
L. Pape,
W. Porod,
J. A. Aguilar-Saavedra,
F. del Aguila,
B. C. Allanach,
J. Alwall,
Yu. Andreev,
D. Aristizabal Sierra,
A. Bartl,
M. Beccaria,
S. Bejar,
L. Benucci,
S. Bityukov,
I. Borjanovic,
G. Bozzi,
G. Burdman,
J. Carvalho,
N. Castro,
B. Clerbaux,
F. de Campos,
A. de Gouvea,
C. Dennis,
A. Djouadi,
O. J. P. Eboli
, et al. (84 additional authors not shown)
Abstract:
This review presents flavour related issues in the production and decays of heavy states at LHC, both from the experimental side and from the theoretical side. We review top quark physics and discuss flavour aspects of several extensions of the Standard Model, such as supersymmetry, little Higgs model or models with extra dimensions. This includes discovery aspects as well as measurement of seve…
▽ More
This review presents flavour related issues in the production and decays of heavy states at LHC, both from the experimental side and from the theoretical side. We review top quark physics and discuss flavour aspects of several extensions of the Standard Model, such as supersymmetry, little Higgs model or models with extra dimensions. This includes discovery aspects as well as measurement of several properties of these heavy states. We also present public available computational tools related to this topic.
△ Less
Submitted 11 January, 2008;
originally announced January 2008.
-
Is Vtb=1 ?
Authors:
J. Alwall,
R. Frederix,
J. -M. Gerard,
A. Giammanco,
M. Herquet,
S. Kalinin,
E. Kou,
V. Lemaitre,
F. Maltoni
Abstract:
The strongest constraint on Vtb presently comes from the 3 x 3 unitarity of the CKM matrix, which fixes Vtb to be very close to one. If the unitarity is relaxed, current information from top production at Tevatron still leaves open the possibility that Vtb is sizably smaller than one. In minimal extensions of the standard model with extra heavy quarks, the unitarity constraints are much weaker a…
▽ More
The strongest constraint on Vtb presently comes from the 3 x 3 unitarity of the CKM matrix, which fixes Vtb to be very close to one. If the unitarity is relaxed, current information from top production at Tevatron still leaves open the possibility that Vtb is sizably smaller than one. In minimal extensions of the standard model with extra heavy quarks, the unitarity constraints are much weaker and the EW precision parameters entail the strongest bounds on Vtb. We discuss the experimental perspectives of discovering and identifying such new physics models at the Tevatron and the LHC, through a precise measurement of Vtb from the single top cross sections and by the study of processes where the extra heavy quarks are produced.
△ Less
Submitted 11 July, 2006; v1 submitted 11 July, 2006;
originally announced July 2006.
