Showing 1–50 of 51 results for author: Hoeche, S

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

QCD Theory meets Information Theory

Authors: Benoît Assi, Stefan Höche, Kyle Lee, Jesse Thaler

Abstract: We present a novel technique to incorporate precision calculations from quantum chromodynamics into fully differential particle-level Monte-Carlo simulations. By minimizing an information-theoretic quantity subject to constraints, we achieve consistency with the theory input and its estimated systematic uncertainties. Our method can be applied to arbitrary observables known from precision calculat… ▽ More We present a novel technique to incorporate precision calculations from quantum chromodynamics into fully differential particle-level Monte-Carlo simulations. By minimizing an information-theoretic quantity subject to constraints, we achieve consistency with the theory input and its estimated systematic uncertainties. Our method can be applied to arbitrary observables known from precision calculations, including multiple observables simultaneously. It generates strictly positive weights, thus offering a clear path to statistically powerful and theoretically precise computations for current and future collider experiments. As a proof of concept, we apply our technique to event-shape observables at electron-positron colliders, leveraging existing precision calculations of thrust. Our analysis highlights the importance of logarithmic moments of event shapes, which have not been previously studied in the collider physics literature. △ Less

Submitted 28 January, 2025; originally announced January 2025.

Comments: 8 pages, 4 figures

Report number: FERMILAB-PUB-25-0029-T, MIT-CTP 5827, MCNET-25-01

Event generation with Sherpa 3

Authors: Enrico Bothmann, Lois Flower, Christian Gütschow, Stefan Höche, Mareen Hoppe, Joshua Isaacson, Max Knobbe, Frank Krauss, Peter Meinzinger, Davide Napoletano, Alan Price, Daniel Reichelt, Marek Schönherr, Steffen Schumann, Frank Siegert

Abstract: Sherpa is a general-purpose Monte Carlo event generator for the simulation of particle collisions in high-energy collider experiments. We summarise new developments, essential features, and ongoing improvements within the Sherpa 3 release series. Physics improvements include higher-order electroweak corrections, simulations of photoproduction and hard diffraction at NLO QCD, heavy-flavour matching… ▽ More Sherpa is a general-purpose Monte Carlo event generator for the simulation of particle collisions in high-energy collider experiments. We summarise new developments, essential features, and ongoing improvements within the Sherpa 3 release series. Physics improvements include higher-order electroweak corrections, simulations of photoproduction and hard diffraction at NLO QCD, heavy-flavour matching in NLO multijet merging, spin-polarised cross section calculations, and a new model of colour reconnections. In addition, the modelling of hadronisation, the underlying event and QED effects in both production and decay has been improved, and the overall event generation efficiency has been enhanced. △ Less

Submitted 29 October, 2024; originally announced October 2024.

Comments: We proudly present the new major release of the Sherpa MC generator

Report number: IPPP/24/67, LTH-1385, FERMILAB-PUB-24-0748-T, ZU-TH 51/24, CERN-TH-2024-171, MCNET-24-17

A Portable Parton-Level Event Generator for the High-Luminosity LHC

Authors: Enrico Bothmann, Taylor Childers, Walter Giele, Stefan Höche, Joshua Isaacson, Max Knobbe

Abstract: The rapid deployment of computing hardware different from the traditional CPU+RAM model in data centers around the world mandates a change in the design of event generators for the Large Hadron Collider, in order to provide economically and ecologically sustainable simulations for the high-luminosity era of the LHC. Parton-level event generation is one of the most computationally demanding parts o… ▽ More The rapid deployment of computing hardware different from the traditional CPU+RAM model in data centers around the world mandates a change in the design of event generators for the Large Hadron Collider, in order to provide economically and ecologically sustainable simulations for the high-luminosity era of the LHC. Parton-level event generation is one of the most computationally demanding parts of the simulation and is therefore a prime target for improvements. We present a production-ready leading-order parton-level event generation framework capable of utilizing most modern hardware and discuss its performance in the standard candle processes of vector boson and top-quark pair production with up to five additional jets. △ Less

Submitted 9 August, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Comments: Submission to SciPost, 32 pages, 11 figures, 2 tables; this is a new version that contains extended discussions and additional content, in particular the new appendix E on CPU vectorization

Report number: FERMILAB-PUB-23-641-T, MCNET-23-18

Journal ref: SciPost Phys. 17, 081 (2024)

UFO 2.0 -- The Universal Feynman Output format

Authors: Luc Darmé, Céline Degrande, Claude Duhr, Benjamin Fuks, Mark Goodsell, Gudrun Heinrich, Valentin Hirschi, Stefan Höche, Marius Höfer, Joshua Isaacson, Olivier Mattelaer, Thorsten Ohl, Davide Pagani, Jürgen Reuter, Peter Richardson, Steffen Schumann, Hua-Sheng Shao, Frank Siegert, Marco Zaro

Abstract: We present an update of the Universal FeynRules Output model format, commonly known as the UFO format, that is used by several automated matrix-element generators and high-energy physics software. We detail different features that have been proposed as extensions of the initial format during the last ten years, and collect them in the current second version of the model format that we coin the Uni… ▽ More We present an update of the Universal FeynRules Output model format, commonly known as the UFO format, that is used by several automated matrix-element generators and high-energy physics software. We detail different features that have been proposed as extensions of the initial format during the last ten years, and collect them in the current second version of the model format that we coin the Universal Feynman Output format. Following the initial philosophy of the UFO, they consist of flexible and modular additions to address particle decays, custom propagators, form factors, the renormalisation group running of parameters and masses, and higher-order quantum corrections. △ Less

Submitted 13 July, 2023; v1 submitted 19 April, 2023; originally announced April 2023.

Comments: 28 pages; version accepted by EPJC

Report number: BONN-TH-2023-03, DESY-23-051, FERMILAB-PUB-23-138-T, KA-TP-06-2023, MCNET-23-06, P3H-23-023, TIF-UNIMI-2023-11

Journal ref: Eur.Phys.J.C 83 (2023) 631

Efficient phase-space generation for hadron collider event simulation

Authors: Enrico Bothmann, Taylor Childers, Walter Giele, Florian Herren, Stefan Hoeche, Joshua Isaacson, Max Knobbe, Rui Wang

Abstract: We present a simple yet efficient algorithm for phase-space integration at hadron colliders. Individual mappings consist of a single t-channel combined with any number of s-channel decays, and are constructed using diagrammatic information. The factorial growth in the number of channels is tamed by providing an option to limit the number of s-channel topologies. We provide a publicly available, pa… ▽ More We present a simple yet efficient algorithm for phase-space integration at hadron colliders. Individual mappings consist of a single t-channel combined with any number of s-channel decays, and are constructed using diagrammatic information. The factorial growth in the number of channels is tamed by providing an option to limit the number of s-channel topologies. We provide a publicly available, parallelized code in C++ and test its performance in typical LHC scenarios. △ Less

Submitted 24 July, 2023; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: 11 pages, 3 figures

Report number: FERMILAB-PUB-23-032-T, MCnet-23-02

Journal ref: SciPost Phys. 15, 169 (2023)

The Future of US Particle Physics -- The Snowmass 2021 Energy Frontier Report

Authors: Meenakshi Narain, Laura Reina, Alessandro Tricoli, Michael Begel, Alberto Belloni, Tulika Bose, Antonio Boveia, Sally Dawson, Caterina Doglioni, Ayres Freitas, James Hirschauer, Stefan Hoeche, Yen-Jie Lee, Huey-Wen Lin, Elliot Lipeles, Zhen Liu, Patrick Meade, Swagato Mukherjee, Pavel Nadolsky, Isobel Ojalvo, Simone Pagan Griso, Christophe Royon, Michael Schmitt, Reinhard Schwienhorst, Nausheen Shah , et al. (10 additional authors not shown)

Abstract: This report, as part of the 2021 Snowmass Process, summarizes the current status of collider physics at the Energy Frontier, the broad and exciting future prospects identified for the Energy Frontier, the challenges and needs of future experiments, and indicates high priority research areas. This report, as part of the 2021 Snowmass Process, summarizes the current status of collider physics at the Energy Frontier, the broad and exciting future prospects identified for the Energy Frontier, the challenges and needs of future experiments, and indicates high priority research areas. △ Less

Submitted 3 January, 2023; v1 submitted 20 November, 2022; originally announced November 2022.

Comments: 128 pages, 41 figures, 17 tables, contribution to Snowmass 2021

Precision QCD, Hadronic Structure & Forward QCD, Heavy Ions: Report of Energy Frontier Topical Groups 5, 6, 7 submitted to Snowmass 2021

Authors: M. Begel, S. Hoeche, M. Schmitt, H. -W. Lin, P. M. Nadolsky, C. Royon, Y-J. Lee, S. Mukherjee, C. Baldenegro, J. Campbell, G. Chachamis, F. G. Celiberto, A. M. Cooper-Sarkar, D. d'Enterria, M. Diefenthaler, M. Fucilla, M. V. Garzelli, M. Guzzi, M. Hentschinski, T. J. Hobbs, J. Huston, J. Isaacson, S. R. Klein, F. Kling, P. Kotko , et al. (25 additional authors not shown)

Abstract: This report was prepared on behalf of three Energy Frontier Topical Groups of the Snowmass 2021 Community Planning Exercise. It summarizes the status and implications of studies of strong interactions in high-energy experiments and QCD theory. We emphasize the rich landscape and broad impact of these studies in the decade ahead. Hadronic interactions play a central role in the high-luminosity Larg… ▽ More This report was prepared on behalf of three Energy Frontier Topical Groups of the Snowmass 2021 Community Planning Exercise. It summarizes the status and implications of studies of strong interactions in high-energy experiments and QCD theory. We emphasize the rich landscape and broad impact of these studies in the decade ahead. Hadronic interactions play a central role in the high-luminosity Large Hadron Collider (LHC) physics program, and strong synergies exist between the (HL-)LHC and planned or proposed experiments at the U.S. Electron-Ion Collider, CERN forward physics experiments, high-intensity facilities, and future TeV-range lepton and hadron colliders. Prospects for precision determinations of the strong coupling and a variety of nonperturbative distribution and fragmentation functions are examined. We also review the potential of envisioned tests of new dynamical regimes of QCD in high-energy and high-density scattering processes with nucleon, ion, and photon initial states. The important role of the high-energy heavy-ion program in studies of nuclear structure and the nuclear medium, and its connections with QCD involving nucleons are summarized. We address ongoing and future theoretical advancements in multi-loop QCD computations, lattice QCD, jet substructure, and event generators. Cross-cutting connections between experimental measurements, theoretical predictions, large-scale data analysis, and high-performance computing are emphasized. △ Less

Submitted 19 November, 2022; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: 95 pages (bibliography 30 pages), 28 figures; v.2: minor changes, authors and references added

Report number: FERMILAB-CONF-22-733-SCD-T, SMU-HEP-22-06

Background Monte Carlo Samples for a Future Hadron Collider

Authors: Robert Gardner, Simone Pagan Griso, Stefan Hoeche, Karol Krizka, Fabio Maltoni, Andrew Melo, Meenakshi Narain, Isabel Ojalvo, Pascal Paschos, Laura Reina, Michael Schmitt, Horst Severini, Giordon Stark, John Stupak III, Thiago Tomei, Alessandro Tricoli, David Yu

Abstract: A description of Standard Model background Monte Carlo samples produced for studies related to future hadron colliders. A description of Standard Model background Monte Carlo samples produced for studies related to future hadron colliders. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Snowmass 2021 whitepaper: Proton structure at the precision frontier

Authors: S. Amoroso, A. Apyan, N. Armesto, R. D. Ball, V. Bertone, C. Bissolotti, J. Bluemlein, R. Boughezal, G. Bozzi, D. Britzger, A. Buckley, A. Candido, S. Carrazza, F. G. Celiberto, S. Cerci, G. Chachamis, A. M. Cooper-Sarkar, A. Courtoy, T. Cridge, J. M. Cruz-Martinez, F. Giuli, M. Guzzi, C. Gwenlan, L. A. Harland-Lang, F. Hekhorn , et al. (32 additional authors not shown)

Abstract: An overwhelming number of theoretical predictions for hadron colliders require parton distribution functions (PDFs), which are an important ingredient of theory infrastructure for the next generation of high-energy experiments. This whitepaper summarizes the status and future prospects for determination of high-precision PDFs applicable in a wide range of energies and experiments, in particular in… ▽ More An overwhelming number of theoretical predictions for hadron colliders require parton distribution functions (PDFs), which are an important ingredient of theory infrastructure for the next generation of high-energy experiments. This whitepaper summarizes the status and future prospects for determination of high-precision PDFs applicable in a wide range of energies and experiments, in particular in precision tests of the Standard Model and in new physics searches at the high-luminosity Large Hadron Collider and Electron-Ion Collider. We discuss the envisioned advancements in experimental measurements, QCD theory, global analysis methodology, and computing that are necessary to bring unpolarized PDFs in the nucleon to the N2LO and N3LO accuracy in the QCD coupling strength. Special attention is given to the new tasks that emerge in the era of the precision PDF analysis, such as those focusing on the robust control of systematic factors both in experimental measurements and theoretical computations. Various synergies between experimental and theoretical studies of the hadron structure are explored, including opportunities for studying PDFs for nuclear and meson targets, PDFs with electroweak contributions or dependence on the transverse momentum, for incisive comparisons between phenomenological models for the PDFs and computations on discrete lattice, and for cross-fertilization with machine learning/AI approaches. [Submitted to the US Community Study on the Future of Particle Physics (Snowmass 2021).] △ Less

Submitted 5 April, 2023; v1 submitted 25 March, 2022; originally announced March 2022.

Comments: 83 pages, 27 figures, contribution to Snowmass 2021; v.3: journal version

Report number: Edinburgh 2022/08, FERMILAB-PUB-22-222-QIS-SCD-T, MPP-2022-32, SLAC-PUB-17652, SMU-HEP-22-02, TIF-UNIMI-2022-6

Journal ref: Acta Phys.Polon.B 53 (2022) 12, A1

Snowmass 2021 White Paper: Electron Ion Collider for High Energy Physics

Authors: R. Abdul Khalek, U. D'Alesio, M. Arratia, A. Bacchetta, M. Battaglieri, M. Begel, M. Boglione, R. Boughezal, R. Boussarie, G. Bozzi, S. V. Chekanov, F. G. Celiberto, G. Chirilli, T. Cridge, R. Cruz-Torres, R. Corliss, C. Cotton, H. Davoudiasl, A. Deshpande, X. Dong, A. Emmert, S. Fazio, S. Forte, Y. Furletova, C. Gal , et al. (83 additional authors not shown)

Abstract: Electron Ion Collider (EIC) is a particle accelerator facility planned for construction at Brookhaven National Laboratory on Long Island, New York by the United States Department of Energy. EIC will provide capabilities of colliding beams of polarized electrons with polarized beams of proton and light ions. EIC will be one of the largest and most sophisticated new accelerator facilities worldwide,… ▽ More Electron Ion Collider (EIC) is a particle accelerator facility planned for construction at Brookhaven National Laboratory on Long Island, New York by the United States Department of Energy. EIC will provide capabilities of colliding beams of polarized electrons with polarized beams of proton and light ions. EIC will be one of the largest and most sophisticated new accelerator facilities worldwide, and the only new large-scale accelerator facility planned for construction in the United States in the next few decades. The versatility, resolving power and intensity of EIC will present many new opportunities to address some of the crucial and fundamental open scientific questions in particle physics. This document provides an overview of the science case of EIC from the perspective of the high energy physics community. △ Less

Submitted 17 October, 2022; v1 submitted 24 March, 2022; originally announced March 2022.

Comments: Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

Event Generators for High-Energy Physics Experiments

Authors: J. M. Campbell, M. Diefenthaler, T. J. Hobbs, S. Höche, J. Isaacson, F. Kling, S. Mrenna, J. Reuter, S. Alioli, J. R. Andersen, C. Andreopoulos, A. M. Ankowski, E. C. Aschenauer, A. Ashkenazi, M. D. Baker, J. L. Barrow, M. van Beekveld, G. Bewick, S. Bhattacharya, N. Bhuiyan, C. Bierlich, E. Bothmann, P. Bredt, A. Broggio, A. Buckley , et al. (187 additional authors not shown)

Abstract: We provide an overview of the status of Monte-Carlo event generators for high-energy particle physics. Guided by the experimental needs and requirements, we highlight areas of active development, and opportunities for future improvements. Particular emphasis is given to physics models and algorithms that are employed across a variety of experiments. These common themes in event generator developme… ▽ More We provide an overview of the status of Monte-Carlo event generators for high-energy particle physics. Guided by the experimental needs and requirements, we highlight areas of active development, and opportunities for future improvements. Particular emphasis is given to physics models and algorithms that are employed across a variety of experiments. These common themes in event generator development lead to a more comprehensive understanding of physics at the highest energies and intensities, and allow models to be tested against a wealth of data that have been accumulated over the past decades. A cohesive approach to event generator development will allow these models to be further improved and systematic uncertainties to be reduced, directly contributing to future experimental success. Event generators are part of a much larger ecosystem of computational tools. They typically involve a number of unknown model parameters that must be tuned to experimental data, while maintaining the integrity of the underlying physics models. Making both these data, and the analyses with which they have been obtained accessible to future users is an essential aspect of open science and data preservation. It ensures the consistency of physics models across a variety of experiments. △ Less

Submitted 26 February, 2025; v1 submitted 21 March, 2022; originally announced March 2022.

Comments: 164 pages, 10 figures, contribution to Snowmass 2021

Report number: CP3-22-12, DESY-22-042, FERMILAB-PUB-22-116-SCD-T, IPPP/21/51, JLAB-PHY-22-3576, KA-TP-04-2022, LA-UR-22-22126, LU-TP-22-12, MCNET-22-04, OUTP-22-03P, P3H-22-024, PITT-PACC 2207, UCI-TR-2022-02

Jets and Jet Substructure at Future Colliders

Authors: Ben Nachman, Salvatore Rappoccio, Nhan Tran, Johan Bonilla, Grigorios Chachamis, Barry M. Dillon, Sergei V. Chekanov, Robin Erbacher, Loukas Gouskos, Andreas Hinzmann, Stefan Höche, B. Todd Huffman, Ashutosh. V. Kotwal, Deepak Kar, Roman Kogler, Clemens Lange, Matt LeBlanc, Roy Lemmon, Christine McLean, Mark S. Neubauer, Tilman Plehn, Debarati Roy, Giordan Stark, Jennifer Roloff, Marcel Vos , et al. (2 additional authors not shown)

Abstract: Even though jet substructure was not an original design consideration for the Large Hadron Collider (LHC) experiments, it has emerged as an essential tool for the current physics program. We examine the role of jet substructure on the motivation for and design of future energy frontier colliders. In particular, we discuss the need for a vibrant theory and experimental research and development prog… ▽ More Even though jet substructure was not an original design consideration for the Large Hadron Collider (LHC) experiments, it has emerged as an essential tool for the current physics program. We examine the role of jet substructure on the motivation for and design of future energy frontier colliders. In particular, we discuss the need for a vibrant theory and experimental research and development program to extend jet substructure physics into the new regimes probed by future colliders. Jet substructure has organically evolved with a close connection between theorists and experimentalists and has catalyzed exciting innovations in both communities. We expect such developments will play an important role in the future energy frontier physics program. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Machine Learning and LHC Event Generation

Authors: Anja Butter, Tilman Plehn, Steffen Schumann, Simon Badger, Sascha Caron, Kyle Cranmer, Francesco Armando Di Bello, Etienne Dreyer, Stefano Forte, Sanmay Ganguly, Dorival Gonçalves, Eilam Gross, Theo Heimel, Gudrun Heinrich, Lukas Heinrich, Alexander Held, Stefan Höche, Jessica N. Howard, Philip Ilten, Joshua Isaacson, Timo Janßen, Stephen Jones, Marumi Kado, Michael Kagan, Gregor Kasieczka , et al. (26 additional authors not shown)

Abstract: First-principle simulations are at the heart of the high-energy physics research program. They link the vast data output of multi-purpose detectors with fundamental theory predictions and interpretation. This review illustrates a wide range of applications of modern machine learning to event generation and simulation-based inference, including conceptional developments driven by the specific requi… ▽ More First-principle simulations are at the heart of the high-energy physics research program. They link the vast data output of multi-purpose detectors with fundamental theory predictions and interpretation. This review illustrates a wide range of applications of modern machine learning to event generation and simulation-based inference, including conceptional developments driven by the specific requirements of particle physics. New ideas and tools developed at the interface of particle physics and machine learning will improve the speed and precision of forward simulations, handle the complexity of collision data, and enhance inference as an inverse simulation problem. △ Less

Submitted 28 December, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Comments: Review article based on a Snowmass 2021 contribution

Journal ref: SciPost Phys. 14, 079 (2023)

The Forward Physics Facility at the High-Luminosity LHC

Authors: Jonathan L. Feng, Felix Kling, Mary Hall Reno, Juan Rojo, Dennis Soldin, Luis A. Anchordoqui, Jamie Boyd, Ahmed Ismail, Lucian Harland-Lang, Kevin J. Kelly, Vishvas Pandey, Sebastian Trojanowski, Yu-Dai Tsai, Jean-Marco Alameddine, Takeshi Araki, Akitaka Ariga, Tomoko Ariga, Kento Asai, Alessandro Bacchetta, Kincso Balazs, Alan J. Barr, Michele Battistin, Jianming Bian, Caterina Bertone, Weidong Bai , et al. (211 additional authors not shown)

Abstract: High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Mod… ▽ More High energy collisions at the High-Luminosity Large Hadron Collider (LHC) produce a large number of particles along the beam collision axis, outside of the acceptance of existing LHC experiments. The proposed Forward Physics Facility (FPF), to be located several hundred meters from the ATLAS interaction point and shielded by concrete and rock, will host a suite of experiments to probe Standard Model (SM) processes and search for physics beyond the Standard Model (BSM). In this report, we review the status of the civil engineering plans and the experiments to explore the diverse physics signals that can be uniquely probed in the forward region. FPF experiments will be sensitive to a broad range of BSM physics through searches for new particle scattering or decay signatures and deviations from SM expectations in high statistics analyses with TeV neutrinos in this low-background environment. High statistics neutrino detection will also provide valuable data for fundamental topics in perturbative and non-perturbative QCD and in weak interactions. Experiments at the FPF will enable synergies between forward particle production at the LHC and astroparticle physics to be exploited. We report here on these physics topics, on infrastructure, detector, and simulation studies, and on future directions to realize the FPF's physics potential. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 429 pages, contribution to Snowmass 2021

Report number: UCI-TR-2022-01, CERN-PBC-Notes-2022-001, FERMILAB-PUB-22-094-ND-SCD-T, INT-PUB-22-006, BONN-TH-2022-04

A novel event generator for the automated simulation of neutrino scattering

Authors: Joshua Isaacson, Stefan Höche, Diego Lopez Gutierrez, Noemi Rocco

Abstract: An event generation framework is presented that enables the automatic simulation of events for next-generation neutrino experiments in the Standard Model or extensions thereof. The new generator combines the calculation of the leptonic current based on an automated matrix element generator, and the computation of the hadronic current based on a state-of-the-art nuclear physics model. The approach… ▽ More An event generation framework is presented that enables the automatic simulation of events for next-generation neutrino experiments in the Standard Model or extensions thereof. The new generator combines the calculation of the leptonic current based on an automated matrix element generator, and the computation of the hadronic current based on a state-of-the-art nuclear physics model. The approach is validated in Standard-Model simulations for electron scattering and neutrino scattering. Furthermore, the first fully-differential neutrino trident production results are shown in the quasielastic region. △ Less

Submitted 18 February, 2022; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 13 pages, 8 figures

Report number: FERMILAB-PUB-21-537-T, MCNET-21-31

Reducing negative weights in Monte Carlo event generation with Sherpa

Authors: Katharina Danziger, Stefan Höche, Frank Siegert

Abstract: An increase in theoretical precision of Monte Carlo event generators is typically accompanied by an increased need for computational resources. One major obstacle are negative weighted events, which appear in Monte Carlo simulations with higher perturbative accuracy. While they can be handled somewhat easily in fixed-order calculations, they are a major concern for particle level event simulations… ▽ More An increase in theoretical precision of Monte Carlo event generators is typically accompanied by an increased need for computational resources. One major obstacle are negative weighted events, which appear in Monte Carlo simulations with higher perturbative accuracy. While they can be handled somewhat easily in fixed-order calculations, they are a major concern for particle level event simulations. In this article, the origin of negative weights in the S-MC@NLO method is reviewed and mechanisms to reduce the negative weight fraction in simulations with the Sherpa event generator are presented, with a focus on V+jets and tt+jets simulations. △ Less

Submitted 28 October, 2021; originally announced October 2021.

Comments: 20 pages, 8 figures

Report number: MCNET-21-30, FERMILAB-PUB-21-536-T

HL-LHC Computing Review Stage-2, Common Software Projects: Event Generators

Authors: The HSF Physics Event Generator WG, :, Efe Yazgan, Josh McFayden, Andrea Valassi, Simone Amoroso, Enrico Bothmann, Andy Buckley, John Campbell, Gurpreet Singh Chahal, Taylor Childers, Gloria Corti, Rikkert Frederix, Stefano Frixione, Francesco Giuli, Alexander Grohsjean, Stefan Hoeche, Phil Ilten, Frank Krauss, Michal Kreps, David Lange, Leif Lonnblad, Zach Marshall, Olivier Mattelaer, Stephen Mrenna , et al. (14 additional authors not shown)

Abstract: This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper… ▽ More This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group (WG), as an input to the second phase of the LHCC review of High-Luminosity LHC (HL-LHC) computing, which is due to take place in November 2021. It complements previous documents prepared by the WG in the context of the first phase of the LHCC review in 2020, including in particular the WG paper on the specific challenges in Monte Carlo event generator software for HL-LHC, which has since been updated and published, and which we are also submitting to the November 2021 review as an integral part of our contribution. △ Less

Submitted 30 September, 2021; originally announced September 2021.

Comments: 34 pages; editors Efe Yazgan, Josh McFayden and Andrea Valassi

Towards NNLO+PS Matching with Sector Showers

Authors: John M Campbell, Stefan Höche, Hai Tao Li, Christian T Preuss, Peter Skands

Abstract: We outline a new technique for the fully-differential matching of final-state parton showers to NNLO calculations, focussing here on the simplest case of leptonic collisions with two final-state jets. The strategy is facilitated by working in the antenna formalism, making use of NNLO antenna subtraction on the fixed-order side and the sector-antenna framework on the shower side. As long as the com… ▽ More We outline a new technique for the fully-differential matching of final-state parton showers to NNLO calculations, focussing here on the simplest case of leptonic collisions with two final-state jets. The strategy is facilitated by working in the antenna formalism, making use of NNLO antenna subtraction on the fixed-order side and the sector-antenna framework on the shower side. As long as the combined real-virtual and double-real corrections do not overcompensate the real-emission term in the three-jet region, negative weights can be eliminated from the matching scheme. We describe the implementation of all necessary components in the VINCIA antenna shower in PYTHIA 8.3. △ Less

Submitted 19 August, 2021; v1 submitted 16 August, 2021; originally announced August 2021.

Comments: Version submitted to PLB

Report number: FERMILAB-PUB-21-365-T, MCNET-21-15

Accelerating LHC phenomenology with analytic one-loop amplitudes: A C++ interface to MCFM

Authors: John M Campbell, Stefan Höche, Christian T Preuss

Abstract: The evaluation of one-loop matrix elements is one of the main bottlenecks in precision calculations for the high-luminosity phase of the Large Hadron Collider. To alleviate this problem, a new C++ interface to the MCFM parton-level Monte Carlo is introduced, giving access to an extensive library of analytic results for one-loop amplitudes. Timing comparisons are presented for a large set of Standa… ▽ More The evaluation of one-loop matrix elements is one of the main bottlenecks in precision calculations for the high-luminosity phase of the Large Hadron Collider. To alleviate this problem, a new C++ interface to the MCFM parton-level Monte Carlo is introduced, giving access to an extensive library of analytic results for one-loop amplitudes. Timing comparisons are presented for a large set of Standard Model processes. These are relevant for high-statistics event simulation in the context of experimental analyses and precision fixed-order computations. △ Less

Submitted 3 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: Revised version submitted to EPJC; contains new section on numerical stability

Report number: FERMILAB-PUB-21-290-T, MCNET-21-13

A Study of QCD Radiation in VBF Higgs Production with Vincia and Pythia

Authors: Stefan Höche, Stephen Mrenna, Shay Payne, Christian T Preuss, Peter Skands

Abstract: We discuss and illustrate the properties of several parton-shower algorithms available in Pythia and Vincia, in the context of Higgs production via vector boson fusion (VBF). In particular, the distinctive colour topology of VBF processes allows to define observables sensitive to the coherent radiation pattern of additional jets. We study a set of such observables, using the Vincia sector-antenna… ▽ More We discuss and illustrate the properties of several parton-shower algorithms available in Pythia and Vincia, in the context of Higgs production via vector boson fusion (VBF). In particular, the distinctive colour topology of VBF processes allows to define observables sensitive to the coherent radiation pattern of additional jets. We study a set of such observables, using the Vincia sector-antenna shower as our main reference, and contrast it to Pythia's transverse-momentum-ordered DGLAP shower as well as Pythia's dipole-improved shower. We then investigate the robustness of these predictions as successive levels of higher-order perturbative matrix elements are incorporated, including next-to-leading-order matched and tree-level merged calculations, using Powheg Box and Sherpa respectively to generate the hard events. △ Less

Submitted 13 October, 2021; v1 submitted 21 June, 2021; originally announced June 2021.

Comments: minor rewording, version submitted to SciPost Physics

Report number: FERMILAB-PUB-21-289-SCD-T, MCNET-21-11

Many-gluon tree amplitudes on modern GPUs: A case study for novel event generators

Authors: Enrico Bothmann, Walter Giele, Stefan Hoeche, Joshua Isaacson, Max Knobbe

Abstract: The compute efficiency of Monte-Carlo event generators for the Large Hadron Collider is expected to become a major bottleneck for simulations in the high-luminosity phase. Aiming at the development of a full-fledged generator for modern GPUs, we study the performance of various recursive strategies to compute multi-gluon tree-level amplitudes. We investigate the scaling of the algorithms on both C… ▽ More The compute efficiency of Monte-Carlo event generators for the Large Hadron Collider is expected to become a major bottleneck for simulations in the high-luminosity phase. Aiming at the development of a full-fledged generator for modern GPUs, we study the performance of various recursive strategies to compute multi-gluon tree-level amplitudes. We investigate the scaling of the algorithms on both CPU and GPU hardware. Finally, we provide practical recommendations as well as baseline implementations for the development of future simulation programs. The GPU implementations can be found at: https://www.gitlab.com/ebothmann/blockgen-archive. △ Less

Submitted 10 January, 2022; v1 submitted 11 June, 2021; originally announced June 2021.

Comments: 27 pages, 9 figures, revised version, Submission to SciPost

Report number: FERMILAB-PUB-21-263-T

A comparative study of Higgs boson production from vector-boson fusion

Authors: A. Buckley, X. Chen, J. Cruz-Martinez, S. Ferrario Ravasio, T. Gehrmann, E. W. N. Glover, S. Höche, A. Huss, J. Huston, J. M. Lindert, S. Plätzer, M. Schönherr

Abstract: The data taken in Run II at the LHC have started to probe Higgs boson production at high transverse momentum. Future data will provide a large sample of events with boosted Higgs boson topologies, allowing for a detailed understanding of electroweak Higgs boson plus two-jet production, and in particular the vector-boson fusion mode (VBF). We perform a detailed comparison of precision calculations… ▽ More The data taken in Run II at the LHC have started to probe Higgs boson production at high transverse momentum. Future data will provide a large sample of events with boosted Higgs boson topologies, allowing for a detailed understanding of electroweak Higgs boson plus two-jet production, and in particular the vector-boson fusion mode (VBF). We perform a detailed comparison of precision calculations for Higgs boson production in this channel, with particular emphasis on large Higgs boson transverse momenta, and on the jet radius dependence of the cross section. We study fixed-order predictions at NLO and NNLO QCD, and compare the results to NLO plus parton shower (NLOPS) matched calculations. The impact of the NNLO corrections on the central predictions is mild, with inclusive scale uncertainties of the order of a few percent, which can increase with the imposition of kinematic cuts. We find good agreement between the fixed-order and matched calculations in non-Sudakov regions, and the various NLOPS predictions also agree well in the Sudakov regime. We analyze backgrounds to VBF Higgs boson production stemming from associated production, and from gluon-gluon fusion. At high Higgs boson transverse momenta, the $Δy_{jj}$ and/or $m_{jj}$ cuts typically used to enhance the VBF signal over background lead to a reduced efficiency. We examine this effect as a function of the jet radius and using different definitions of the tagging jets. QCD radiative corrections increase for all Higgs production modes with increasing Higgs boson $p_T$, but the proportionately larger increase in the gluon fusion channel results in a decrease of the gluon-gluon fusion background to electroweak Higgs plus two jet production upon requiring exclusive two-jet topologies. We study this effect in detail and contrast in particular a central jet veto with a global jet multiplicity requirement. △ Less

Submitted 21 November, 2021; v1 submitted 24 May, 2021; originally announced May 2021.

Comments: 31 pages, 25 figures

Report number: FERMILAB-PUB-21-218-T, IPPP/20/101, MCNET-21-08, KA-TP-08-2021, OUTP-21-14P, ZU-TH 22/21, CERN-TH-2021-081

HL-LHC Computing Review: Common Tools and Community Software

Authors: HEP Software Foundation, :, Thea Aarrestad, Simone Amoroso, Markus Julian Atkinson, Joshua Bendavid, Tommaso Boccali, Andrea Bocci, Andy Buckley, Matteo Cacciari, Paolo Calafiura, Philippe Canal, Federico Carminati, Taylor Childers, Vitaliano Ciulli, Gloria Corti, Davide Costanzo, Justin Gage Dezoort, Caterina Doglioni, Javier Mauricio Duarte, Agnieszka Dziurda, Peter Elmer, Markus Elsing, V. Daniel Elvira, Giulio Eulisse , et al. (85 additional authors not shown)

Abstract: Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this doc… ▽ More Common and community software packages, such as ROOT, Geant4 and event generators have been a key part of the LHC's success so far and continued development and optimisation will be critical in the future. The challenges are driven by an ambitious physics programme, notably the LHC accelerator upgrade to high-luminosity, HL-LHC, and the corresponding detector upgrades of ATLAS and CMS. In this document we address the issues for software that is used in multiple experiments (usually even more widely than ATLAS and CMS) and maintained by teams of developers who are either not linked to a particular experiment or who contribute to common software within the context of their experiment activity. We also give space to general considerations for future software and projects that tackle upcoming challenges, no matter who writes it, which is an area where community convergence on best practice is extremely useful. △ Less

Submitted 31 August, 2020; originally announced August 2020.

Comments: 40 pages contribution to Snowmass 2021

Report number: HSF-DOC-2020-01

Challenges in Monte Carlo event generator software for High-Luminosity LHC

Authors: The HSF Physics Event Generator WG, :, Andrea Valassi, Efe Yazgan, Josh McFayden, Simone Amoroso, Joshua Bendavid, Andy Buckley, Matteo Cacciari, Taylor Childers, Vitaliano Ciulli, Rikkert Frederix, Stefano Frixione, Francesco Giuli, Alexander Grohsjean, Christian Gütschow, Stefan Höche, Walter Hopkins, Philip Ilten, Dmitri Konstantinov, Frank Krauss, Qiang Li, Leif Lönnblad, Fabio Maltoni, Michelangelo Mangano , et al. (16 additional authors not shown)

Abstract: We review the main software and computing challenges for the Monte Carlo physics event generators used by the LHC experiments, in view of the High-Luminosity LHC (HL-LHC) physics programme. This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group as an input to the LHCC review of HL-LHC computing, which has started in May 2020. We review the main software and computing challenges for the Monte Carlo physics event generators used by the LHC experiments, in view of the High-Luminosity LHC (HL-LHC) physics programme. This paper has been prepared by the HEP Software Foundation (HSF) Physics Event Generator Working Group as an input to the LHCC review of HL-LHC computing, which has started in May 2020. △ Less

Submitted 18 February, 2021; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: 20 pages; editors Andrea Valassi, Efe Yazgan and Josh McFayden; addressed additional comments by journal reviewers

Report number: CERN-LPCC-2020-002; FERMILAB-PUB-20-183-SCD-T; MCNET-20-15

Journal ref: Comput Softw Big Sci 5, 12 (2021)

Event Generation with Sherpa 2.2

Authors: Enrico Bothmann, Gurpreet Singh Chahal, Stefan Höche, Johannes Krause, Frank Krauss, Silvan Kuttimalai, Sebastian Liebschner, Davide Napoletano, Marek Schönherr, Holger Schulz, Steffen Schumann, Frank Siegert

Abstract: Sherpa is a general-purpose Monte Carlo event generator for the simulation of particle collisions in high-energy collider experiments. We summarize essential features and improvements of the Sherpa 2.2 release series, which is heavily used for event generation in the analysis and interpretation of LHC Run 1 and Run 2 data. We highlight a decade of developments towards ever higher precision in the… ▽ More Sherpa is a general-purpose Monte Carlo event generator for the simulation of particle collisions in high-energy collider experiments. We summarize essential features and improvements of the Sherpa 2.2 release series, which is heavily used for event generation in the analysis and interpretation of LHC Run 1 and Run 2 data. We highlight a decade of developments towards ever higher precision in the simulation of particle-collision events. △ Less

Submitted 3 September, 2019; v1 submitted 22 May, 2019; originally announced May 2019.

Comments: 39 pages, 18 figures, extended discussion

Report number: FERMILAB-PUB-19-218-T, SLAC-PUB-17433, IPPP/19/42, MCNET-19-11

Journal ref: SciPost Phys. 7, 034 (2019)

Simulation of vector boson plus many jet final states at the high luminosity LHC

Authors: Stefan Höche, Stefan Prestel, Holger Schulz

Abstract: We present a novel event generation framework for the efficient simulation of vector boson plus multi-jet backgrounds at the high-luminosity LHC and at possible future hadron colliders. MPI parallelization of parton-level and particle-level event generation and storage of parton-level event information using the HDF5 data format allow us to obtain leading-order merged Monte-Carlo predictions with… ▽ More We present a novel event generation framework for the efficient simulation of vector boson plus multi-jet backgrounds at the high-luminosity LHC and at possible future hadron colliders. MPI parallelization of parton-level and particle-level event generation and storage of parton-level event information using the HDF5 data format allow us to obtain leading-order merged Monte-Carlo predictions with up to nine jets in the final state. The parton-level event samples generated in this manner correspond to an integrated luminosity of 3ab-1 and are made publicly available for future phenomenological studies. △ Less

Submitted 13 May, 2019; originally announced May 2019.

Comments: 10 pages, 8 figures, 5 tables

Report number: FERMILAB-PUB-19-192-T, LU-TP 19-14, MCNET-19-09

Journal ref: Phys. Rev. D 100, 014024 (2019)

Jet cross sections at the LHC and the quest for higher precision

Authors: Johannes Bellm, Andy Buckley, Xuan Chen, Aude Gehrmann-De Ridder, Thomas Gehrmann, Nigel Glover, Alexander Huss, Joao Pires, Stefan Höche, Joey Huston, Silvan Kuttimalai, Simon Plätzer, Emanuele Re

Abstract: We perform a phenomenological study of $Z$ plus jet, Higgs plus jet and di-jet production at the Large Hadron Collider. We investigate in particular the dependence of the leading jet cross section on the jet radius as a function of the jet transverse momentum. Theoretical predictions are obtained using perturbative QCD calculations at the next-to and next-to-next-to-leading order, using a range of… ▽ More We perform a phenomenological study of $Z$ plus jet, Higgs plus jet and di-jet production at the Large Hadron Collider. We investigate in particular the dependence of the leading jet cross section on the jet radius as a function of the jet transverse momentum. Theoretical predictions are obtained using perturbative QCD calculations at the next-to and next-to-next-to-leading order, using a range of renormalization and factorization scales. The fixed order predictions are compared to results obtained from matching next-to-leading order calculations to parton showers. A study of the scale dependence as a function of the jet radius is used to provide a better estimate of the scale uncertainty for small jet sizes. The non-perturbative corrections as a function of jet radius are estimated from different generators. △ Less

Submitted 29 March, 2019; originally announced March 2019.

Comments: 23 pages, 19 figures

Report number: FERMILAB-PUB-19-100-T, CERN-TH-2019-038, SLAC-PUB-17411, UWTHPH-2019-9, LAPTH-019/19, CFTP/19-006, ZU-TH 16/19, LU-TP-19-10, MCnet-19-06, IPPP/19/22

Higgs Physics at the HL-LHC and HE-LHC

Authors: M. Cepeda, S. Gori, P. Ilten, M. Kado, F. Riva, R. Abdul Khalek, A. Aboubrahim, J. Alimena, S. Alioli, A. Alves, C. Asawatangtrakuldee, A. Azatov, P. Azzi, S. Bailey, S. Banerjee, E. L. Barberio, D. Barducci, G. Barone, M. Bauer, C. Bautista, P. Bechtle, K. Becker, A. Benaglia, M. Bengala, N. Berger , et al. (352 additional authors not shown)

Abstract: The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the… ▽ More The discovery of the Higgs boson in 2012, by the ATLAS and CMS experiments, was a success achieved with only a percent of the entire dataset foreseen for the LHC. It opened a landscape of possibilities in the study of Higgs boson properties, Electroweak Symmetry breaking and the Standard Model in general, as well as new avenues in probing new physics beyond the Standard Model. Six years after the discovery, with a conspicuously larger dataset collected during LHC Run 2 at a 13 TeV centre-of-mass energy, the theory and experimental particle physics communities have started a meticulous exploration of the potential for precision measurements of its properties. This includes studies of Higgs boson production and decays processes, the search for rare decays and production modes, high energy observables, and searches for an extended electroweak symmetry breaking sector. This report summarises the potential reach and opportunities in Higgs physics during the High Luminosity phase of the LHC, with an expected dataset of pp collisions at 14 TeV, corresponding to an integrated luminosity of 3 ab$^{-1}$. These studies are performed in light of the most recent analyses from LHC collaborations and the latest theoretical developments. The potential of an LHC upgrade, colliding protons at a centre-of-mass energy of 27 TeV and producing a dataset corresponding to an integrated luminosity of 15 ab$^{-1}$, is also discussed. △ Less

Submitted 19 March, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Report from Working Group 2 on the Physics of the HL-LHC, and Perspectives at the HE-LHC, 364 pages

Report number: CERN-LPCC-2018-04

Weak Vector Boson Production with Many Jets at the LHC $\sqrt{s}= 13$ TeV

Authors: F. R. Anger, F. Febres Cordero, S. Höche, D. Maître

Abstract: Signatures with an electroweak vector boson and many jets play a crucial role at the Large Hadron Collider, both in the measurement of Standard-Model parameters and in searches for new physics. Precise predictions for these multi-scale processes are therefore indispensable. We present next-to-leading order QCD predictions for $W^\pm/Z$+jets at $\sqrt{s}=13$ TeV, including up to five/four jets in t… ▽ More Signatures with an electroweak vector boson and many jets play a crucial role at the Large Hadron Collider, both in the measurement of Standard-Model parameters and in searches for new physics. Precise predictions for these multi-scale processes are therefore indispensable. We present next-to-leading order QCD predictions for $W^\pm/Z$+jets at $\sqrt{s}=13$ TeV, including up to five/four jets in the final state. All production channels are included and leptonic decays of the vector bosons are considered at the amplitude level. We assess theoretical uncertainties arising from renormalization- and factorization-scale dependence by considering fixed-order dynamical scales based on the $H_{\rm T}$ variable as well as on the MiNLO procedure. We also explore uncertainties associated to different choices of parton-distribution functions. We provide event samples that can be explored through publicly available $n$-tuple sets, generated with BlackHat in combination with SHERPA. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Journal ref: Phys. Rev. D 97, 096010 (2018)

A Roadmap for HEP Software and Computing R&D for the 2020s

Authors: Johannes Albrecht, Antonio Augusto Alves Jr, Guilherme Amadio, Giuseppe Andronico, Nguyen Anh-Ky, Laurent Aphecetche, John Apostolakis, Makoto Asai, Luca Atzori, Marian Babik, Giuseppe Bagliesi, Marilena Bandieramonte, Sunanda Banerjee, Martin Barisits, Lothar A. T. Bauerdick, Stefano Belforte, Douglas Benjamin, Catrin Bernius, Wahid Bhimji, Riccardo Maria Bianchi, Ian Bird, Catherine Biscarat, Jakob Blomer, Kenneth Bloom, Tommaso Boccali , et al. (285 additional authors not shown)

Abstract: Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for… ▽ More Particle physics has an ambitious and broad experimental programme for the coming decades. This programme requires large investments in detector hardware, either to build new facilities and experiments, or to upgrade existing ones. Similarly, it requires commensurate investment in the R&D of software to acquire, manage, process, and analyse the shear amounts of data to be recorded. In planning for the HL-LHC in particular, it is critical that all of the collaborating stakeholders agree on the software goals and priorities, and that the efforts complement each other. In this spirit, this white paper describes the R&D activities required to prepare for this software upgrade. △ Less

Submitted 19 December, 2018; v1 submitted 18 December, 2017; originally announced December 2017.

Report number: HSF-CWP-2017-01

Journal ref: Comput Softw Big Sci (2019) 3, 7

Systematics of quark/gluon tagging

Authors: Philippe Gras, Stefan Höche, Deepak Kar, Andrew Larkoski, Leif Lönnblad, Simon Plätzer, Andrzej Siódmok, Peter Skands, Gregory Soyez, Jesse Thaler

Abstract: By measuring the substructure of a jet, one can assign it a "quark" or "gluon" tag. In the eikonal (double-logarithmic) limit, quark/gluon discrimination is determined solely by the color factor of the initiating parton (C_F versus C_A). In this paper, we confront the challenges faced when going beyond this leading-order understanding, using both parton-shower generators and first-principles calcu… ▽ More By measuring the substructure of a jet, one can assign it a "quark" or "gluon" tag. In the eikonal (double-logarithmic) limit, quark/gluon discrimination is determined solely by the color factor of the initiating parton (C_F versus C_A). In this paper, we confront the challenges faced when going beyond this leading-order understanding, using both parton-shower generators and first-principles calculations to assess the impact of higher-order perturbative and nonperturbative physics. Working in the idealized context of electron-positron collisions, where one can define a proxy for quark and gluon jets based on the Lorentz structure of the production vertex, we find a fascinating interplay between perturbative shower effects and nonperturbative hadronization effects. Turning to proton-proton collisions, we highlight a core set of measurements that would constrain current uncertainties in quark/gluon tagging and improve the overall modeling of jets at the Large Hadron Collider. △ Less

Submitted 8 August, 2017; v1 submitted 12 April, 2017; originally announced April 2017.

Comments: 50 pages, 20 figures, extended version of the Les Houches 2015 study from arXiv:1605.04692; v2: updated to approximately match journal version, including improved discussion of nonperturbative Casimir scaling and more umlauts

Report number: MIT-CTP 4885, CoEPP-MN-17-2, MCNET-17-04

Journal ref: JHEP 1707 (2017) 091

Handbook of LHC Higgs Cross Sections: 4. Deciphering the Nature of the Higgs Sector

Authors: D. de Florian, C. Grojean, F. Maltoni, C. Mariotti, A. Nikitenko, M. Pieri, P. Savard, M. Schumacher, R. Tanaka, R. Aggleton, M. Ahmad, B. Allanach, C. Anastasiou, W. Astill, S. Badger, M. Badziak, J. Baglio, E. Bagnaschi, A. Ballestrero, A. Banfi, D. Barducci, M. Beckingham, C. Becot, G. Bélanger, J. Bellm , et al. (351 additional authors not shown)

Abstract: This Report summarizes the results of the activities of the LHC Higgs Cross Section Working Group in the period 2014-2016. The main goal of the working group was to present the state-of-the-art of Higgs physics at the LHC, integrating all new results that have appeared in the last few years. The first part compiles the most up-to-date predictions of Higgs boson production cross sections and decay… ▽ More This Report summarizes the results of the activities of the LHC Higgs Cross Section Working Group in the period 2014-2016. The main goal of the working group was to present the state-of-the-art of Higgs physics at the LHC, integrating all new results that have appeared in the last few years. The first part compiles the most up-to-date predictions of Higgs boson production cross sections and decay branching ratios, parton distribution functions, and off-shell Higgs boson production and interference effects. The second part discusses the recent progress in Higgs effective field theory predictions, followed by the third part on pseudo-observables, simplified template cross section and fiducial cross section measurements, which give the baseline framework for Higgs boson property measurements. The fourth part deals with the beyond the Standard Model predictions of various benchmark scenarios of Minimal Supersymmetric Standard Model, extended scalar sector, Next-to-Minimal Supersymmetric Standard Model and exotic Higgs boson decays. This report follows three previous working-group reports: Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002), Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002), and Handbook of LHC Higgs Cross Sections: 3. Higgs properties (CERN-2013-004). The current report serves as the baseline reference for Higgs physics in LHC Run 2 and beyond. △ Less

Submitted 15 May, 2017; v1 submitted 25 October, 2016; originally announced October 2016.

Comments: 869 pages, 295 figures, 248 tables and 1645 citations. Working Group web page: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/LHCHXSWG

Report number: CERN Yellow Reports: Monographs Volume 2/2017 (CERN--2017--002-M)

Precision Studies of Observables in pp->W->l nu and pp->gamma,Z->l+l- processes at the LHC

Authors: S. Alioli, A. B. Arbuzov, D. Yu. Bardin, L. Barze, C. Bernaciak, S. G. Bondarenko, C. Carloni Calame, M. Chiesa, S. Dittmaier, G. Ferrera, D. de Florian, M. Grazzini, S. Hoeche, A. Huss, S. Jadach, L. V. Kalinovskaya, A. Karlberg, F. Krauss, Y. Li, H. Martinez, G. Montagna, A. Mueck, P. Nason, O. Nicrosini, F. Petriello , et al. (11 additional authors not shown)

Abstract: This report was prepared in the context of the LPCC "Electroweak Precision Measurements at the LHC WG" and summarizes the activity of a subgroup dedicated to the systematic comparison of public Monte Carlo codes, which describe the Drell-Yan processes at hadron colliders, in particular at the CERN Large Hadron Collider (LHC). This work represents an important step towards the definition of an accu… ▽ More This report was prepared in the context of the LPCC "Electroweak Precision Measurements at the LHC WG" and summarizes the activity of a subgroup dedicated to the systematic comparison of public Monte Carlo codes, which describe the Drell-Yan processes at hadron colliders, in particular at the CERN Large Hadron Collider (LHC). This work represents an important step towards the definition of an accurate simulation framework necessary for very high-precision measurements of electroweak (EW) observables such as the $W$ boson mass and the weak mixing angle. All the codes considered in this report share at least next-to-leading-order (NLO) accuracy in the prediction of the total cross sections in an expansion either in the strong or in the EW coupling constant. The NLO fixed-order predictions have been scrutinized at the technical level, using exactly the same inputs, setup and perturbative accuracy, in order to quantify the level of agreement of different implementations of the same calculation. A dedicated comparison, again at the technical level, of three codes that reach next-to-next-to-leading-order (NNLO) accuracy in quantum chromodynamics (QCD) for the total cross section has also been performed. These fixed-order results are a well-defined reference that allows a classification of the impact of higher-order sets of radiative corrections. Several examples of higher-order effects due to the strong or the EW interaction are discussed in this common framework. Also the combination of QCD and EW corrections is discussed, together with the ambiguities that affect the final result, due to the choice of a specific combination recipe. △ Less

Submitted 7 June, 2016; originally announced June 2016.

Comments: 92 pages, report of the working group on precision calculations for Drell-Yan processes

Report number: CERN-TH-2016-137, CERN-LPCC-2016-002

ASCR/HEP Exascale Requirements Review Report

Authors: Salman Habib, Robert Roser, Richard Gerber, Katie Antypas, Katherine Riley, Tim Williams, Jack Wells, Tjerk Straatsma, A. Almgren, J. Amundson, S. Bailey, D. Bard, K. Bloom, B. Bockelman, A. Borgland, J. Borrill, R. Boughezal, R. Brower, B. Cowan, H. Finkel, N. Frontiere, S. Fuess, L. Ge, N. Gnedin, S. Gottlieb , et al. (29 additional authors not shown)

Abstract: This draft report summarizes and details the findings, results, and recommendations derived from the ASCR/HEP Exascale Requirements Review meeting held in June, 2015. The main conclusions are as follows. 1) Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 ti… ▽ More This draft report summarizes and details the findings, results, and recommendations derived from the ASCR/HEP Exascale Requirements Review meeting held in June, 2015. The main conclusions are as follows. 1) Larger, more capable computing and data facilities are needed to support HEP science goals in all three frontiers: Energy, Intensity, and Cosmic. The expected scale of the demand at the 2025 timescale is at least two orders of magnitude -- and in some cases greater -- than that available currently. 2) The growth rate of data produced by simulations is overwhelming the current ability, of both facilities and researchers, to store and analyze it. Additional resources and new techniques for data analysis are urgently needed. 3) Data rates and volumes from HEP experimental facilities are also straining the ability to store and analyze large and complex data volumes. Appropriately configured leadership-class facilities can play a transformational role in enabling scientific discovery from these datasets. 4) A close integration of HPC simulation and data analysis will aid greatly in interpreting results from HEP experiments. Such an integration will minimize data movement and facilitate interdependent workflows. 5) Long-range planning between HEP and ASCR will be required to meet HEP's research needs. To best use ASCR HPC resources the experimental HEP program needs a) an established long-term plan for access to ASCR computational and data resources, b) an ability to map workflows onto HPC resources, c) the ability for ASCR facilities to accommodate workflows run by collaborations that can have thousands of individual members, d) to transition codes to the next-generation HPC platforms that will be available at ASCR facilities, e) to build up and train a workforce capable of developing and using simulations and analysis to support HEP scientific research on next-generation systems. △ Less

Submitted 31 March, 2016; v1 submitted 30 March, 2016; originally announced March 2016.

Comments: 77 pages, 13 Figures; draft report, subject to further revision

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

Authors: Salman Habib, Robert Roser, Tom LeCompte, Zach Marshall, Anders Borgland, Brett Viren, Peter Nugent, Makoto Asai, Lothar Bauerdick, Hal Finkel, Steve Gottlieb, Stefan Hoeche, Paul Sheldon, Jean-Luc Vay, Peter Elmer, Michael Kirby, Simon Patton, Maxim Potekhin, Brian Yanny, Paolo Calafiura, Eli Dart, Oliver Gutsche, Taku Izubuchi, Adam Lyon, Don Petravick

Abstract: Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence… ▽ More Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3) Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material. △ Less

Submitted 28 October, 2015; originally announced October 2015.

Comments: 72 pages

Triple vector boson production through Higgs-Strahlung with NLO multijet merging

Authors: S. Hoeche, F. Krauss, S. Pozzorini, M. Schoenherr, J. M. Thompson, K. C. Zapp

Abstract: Triple gauge boson hadroproduction, in particular the production of three $W$-bosons at the LHC, is considered at next-to leading order accuracy in QCD. The NLO matrix elements are combined with parton showers. Multijet merging is invoked such that NLO matrix elements with one additional jet are also included. The studies here incorporate both the signal and all relevant backgrounds for $VH$ produ… ▽ More Triple gauge boson hadroproduction, in particular the production of three $W$-bosons at the LHC, is considered at next-to leading order accuracy in QCD. The NLO matrix elements are combined with parton showers. Multijet merging is invoked such that NLO matrix elements with one additional jet are also included. The studies here incorporate both the signal and all relevant backgrounds for $VH$ production with the subsequent decay of the Higgs boson into $W$-- or $τ$--\-pairs. They have been performed using \SherpaOpenLoops in combination with Collier. △ Less

Submitted 6 June, 2014; v1 submitted 28 March, 2014; originally announced March 2014.

Comments: 12 pages, 4 figures

Journal ref: Phys. Rev. D 89, 093015 (2014)

Uncertainties in MEPS@NLO calculations of h+jets

Authors: Stefan Hoeche, Frank Krauss, Marek Schonherr

Abstract: Uncertainties in the simulation of Higgs boson production with up to two jets at next-to leading order accuracy are investigated. Traditional uncertainty estimates based on scale variations are extended employing different functional forms for the central scale, and the impact of details in the implementation of the parton shower is discussed. Uncertainties in the simulation of Higgs boson production with up to two jets at next-to leading order accuracy are investigated. Traditional uncertainty estimates based on scale variations are extended employing different functional forms for the central scale, and the impact of details in the implementation of the parton shower is discussed. △ Less

Submitted 30 January, 2014; originally announced January 2014.

Comments: 16 pages, 3 tables, 16 figures

Report number: SLAC-PUB 15899, IPPP/14/08, DCPT/14/16, LPN14-009, MCNET-14-02

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 9: Computing

Authors: L. A. T. Bauerdick, S. Gottlieb, G. Bell, K. Bloom, T. Blum, D. Brown, M. Butler, A. Connolly, E. Cormier, P. Elmer, M. Ernst, I. Fisk, G. Fuller, R. Gerber, S. Habib, M. Hildreth, S. Hoeche, D. Holmgren, C. Joshi, A. Mezzacappa, R. Mount, R. Pordes, B. Rebel, L. Reina, M. C. Sanchez , et al. (6 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 9, on Computing, discusses the computing challenges for future experiments in the Energy, Intensity, and Cosmic Frontiers, for accelerator science, and for particle theory, as well as structural issues in su… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 9, on Computing, discusses the computing challenges for future experiments in the Energy, Intensity, and Cosmic Frontiers, for accelerator science, and for particle theory, as well as structural issues in supporting the intense uses of computing required in all areas of particle physics. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 36 pages

Snowmass 2013 Top quark working group report

Authors: K. Agashe, R. Erbacher, C. E. Gerber, K. Melnikov, R. Schwienhorst, A. Mitov, M. Vos, S. Wimpenny, J. Adelman, M. Baumgart, A. Garcia-Bellido, A. Loginov, A. Jung, M. Schulze, J. Shelton, N. Craig, M. Velasco, T. Golling, J. Hubisz, A. Ivanov, M. Perelstein, S. Chekanov, J. Dolen, J. Pilot, R. Pöschl , et al. (145 additional authors not shown)

Abstract: This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass). This report summarizes the work of the Energy Frontier Top Quark working group of the 2013 Community Summer Study (Snowmass). △ Less

Submitted 8 November, 2013; originally announced November 2013.

Ntuples for NLO Events at Hadron Colliders

Authors: Z. Bern, L. J. Dixon, F. Febres Cordero, S. Hoeche, H. Ita, D. A. Kosower, D. Maitre

Abstract: We present an event-file format for the dissemination of next-to-leading-order (NLO) predictions for QCD processes at hadron colliders. The files contain all information required to compute generic jet-based infrared-safe observables at fixed order (without showering or hadronization), and to recompute observables with different factorization and renormalization scales. The files also make it poss… ▽ More We present an event-file format for the dissemination of next-to-leading-order (NLO) predictions for QCD processes at hadron colliders. The files contain all information required to compute generic jet-based infrared-safe observables at fixed order (without showering or hadronization), and to recompute observables with different factorization and renormalization scales. The files also make it possible to evaluate cross sections and distributions with different parton distribution functions. This in turn makes it possible to estimate uncertainties in NLO predictions of a wide variety of observables without recomputing the short-distance matrix elements. The event files allow a user to choose among a wide range of commonly-used jet algorithms and jet-size parameters. We provide event files for a $W$ or $Z$ boson accompanied by up to four jets, and for pure-jet events with up to four jets. The files are for the Large Hadron Collider with a center of mass energy of 7 or 8 TeV. A C++ library along with a Python interface for handling these files are also provided and described in this article. The library allows a user to read the event files and recompute observables transparently for different pdf sets and factorization and renormalization scales. △ Less

Submitted 28 October, 2013; originally announced October 2013.

Comments: 43 pages, 6 tables

Report number: UCLA/13/TEP/108, SLAC--PUB--15739, SB/F/422-13, IPhT--T13/228, IPPP-13-86, CERN--PH--TH/2013-243

Handbook of LHC Higgs Cross Sections: 3. Higgs Properties

Authors: The LHC Higgs Cross Section Working Group, S. Heinemeyer, C. Mariotti, G. Passarino, R. Tanaka, J. R. Andersen, P. Artoisenet, E. A. Bagnaschi, A. Banfi, T. Becher, F. U. Bernlochner, S. Bolognesi, P. Bolzoni, R. Boughezal, D. Buarque, J. Campbell, F. Caola, M. Carena, F. Cascioli, N. Chanon, T. Cheng, S. Y. Choi, A. David, P. de Aquino, G. Degrassi , et al. (133 additional authors not shown)

Abstract: This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Incl… ▽ More This Report summarizes the results of the activities in 2012 and the first half of 2013 of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. This report follows the first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) and the second working group report Handbook of LHC Higgs Cross Sections: 2. Differential Distributions (CERN-2012-002). After the discovery of a Higgs boson at the LHC in mid-2012 this report focuses on refined prediction of Standard Model (SM) Higgs phenomenology around the experimentally observed value of 125-126 GeV, refined predictions for heavy SM-like Higgs bosons as well as predictions in the Minimal Supersymmetric Standard Model and first steps to go beyond these models. The other main focus is on the extraction of the characteristics and properties of the newly discovered particle such as couplings to SM particles, spin and CP-quantum numbers etc. △ Less

Submitted 29 November, 2013; v1 submitted 4 July, 2013; originally announced July 2013.

Comments: 404 pages, 139 figures, 162 tables. Updated for author names and minor corrections in the figures and tables. Working Group web page: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/CrossSections

Report number: CERN-2013-004

The New Look pMSSM with Neutralino and Gravitino LSPs

Authors: Matthew W. Cahill-Rowley, JoAnne L. Hewett, Stefan Hoeche, Ahmed Ismail, Thomas G. Rizzo

Abstract: The pMSSM provides a broad perspective on SUSY phenomenology. In this paper we generate two new, very large, sets of pMSSM models with sparticle masses extending up to 4 TeV, where the lightest supersymmetric particle (LSP) is either a neutralino or gravitino. The existence of a gravitino LSP necessitates a detailed study of its cosmological effects and we find that Big Bang Nucleosynthesis places… ▽ More The pMSSM provides a broad perspective on SUSY phenomenology. In this paper we generate two new, very large, sets of pMSSM models with sparticle masses extending up to 4 TeV, where the lightest supersymmetric particle (LSP) is either a neutralino or gravitino. The existence of a gravitino LSP necessitates a detailed study of its cosmological effects and we find that Big Bang Nucleosynthesis places strong constraints on this scenario. Both sets are subjected to a global set of theoretical, observational and experimental constraints resulting in a sample of \sim 225k viable models for each LSP type. The characteristics of these two model sets are briefly compared. We confront the neutralino LSP model set with searches for SUSY at the 7 TeV LHC using both the missing (MET) and non-missing ET ATLAS analyses. In the MET case, we employ Monte Carlo estimates of the ratios of the SM backgrounds at 7 and 8 TeV to rescale the 7 TeV data-driven ATLAS backgrounds to 8 TeV. This allows us to determine the pMSSM parameter space coverage for this collision energy. We find that an integrated luminosity of \sim 5-20 fb^{-1} at 8 TeV would yield a substantial increase in this coverage compared to that at 7 TeV and can probe roughly half of the model set. If the pMSSM is not discovered during the 8 TeV run, then our model set will be essentially void of gluinos and lightest first and second generation squarks that are \lesssim 700-800 GeV, which is much less than the analogous mSUGRA bound. Finally, we demonstrate that non-MET SUSY searches continue to play an important role in exploring the pMSSM parameter space. These two pMSSM model sets can be used as the basis for investigations for years to come. △ Less

Submitted 30 June, 2012; v1 submitted 19 June, 2012; originally announced June 2012.

Comments: 54 pages, 22 figures; typos fixed, references added

Report number: SLAC-PUB-14922

W+n-jet predictions at the Large Hadron Collider at next-to-leading order matched with a parton shower

Authors: Stefan Hoeche, Frank Krauss, Marek Schonherr, Frank Siegert

Abstract: For the first time, differential cross sections for the production of W-bosons in conjunction with up to three jets, computed at next-to leading order in QCD and including parton shower corrections, are presented and compared to recent experimental data from the Large Hadron Collider. For the first time, differential cross sections for the production of W-bosons in conjunction with up to three jets, computed at next-to leading order in QCD and including parton shower corrections, are presented and compared to recent experimental data from the Large Hadron Collider. △ Less

Submitted 13 February, 2013; v1 submitted 27 January, 2012; originally announced January 2012.

Comments: 4 pages, 1 table, 2 figures, v2 as published in PRL

Report number: SLAC-PUB 14859, IPPP/12/03, DCPT/12/06, LPN12-026, MCNET-12-01, FR-PHENO-2012-001

Journal ref: Phys. Rev. Lett. 110 (2013) 052001

Handbook of LHC Higgs Cross Sections: 2. Differential Distributions

Authors: LHC Higgs Cross Section Working Group, S. Dittmaier, C. Mariotti, G. Passarino, R. Tanaka, S. Alekhin, J. Alwall, E. A. Bagnaschi, A. Banfi, J. Blumlein, S. Bolognesi, N. Chanon, T. Cheng, L. Cieri, A. M. Cooper-Sarkar, M. Cutajar, S. Dawson, G. Davies, N. De Filippis, G. Degrassi, A. Denner, D. D'Enterria, S. Diglio, B. Di Micco, R. Di Nardo , et al. (96 additional authors not shown)

Abstract: This Report summarises the results of the second year's activities of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. The first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) focuses… ▽ More This Report summarises the results of the second year's activities of the LHC Higgs Cross Section Working Group. The main goal of the working group was to present the state of the art of Higgs Physics at the LHC, integrating all new results that have appeared in the last few years. The first working group report Handbook of LHC Higgs Cross Sections: 1. Inclusive Observables (CERN-2011-002) focuses on predictions (central values and errors) for total Higgs production cross sections and Higgs branching ratios in the Standard Model and its minimal supersymmetric extension, covering also related issues such as Monte Carlo generators, parton distribution functions, and pseudo-observables. This second Report represents the next natural step towards realistic predictions upon providing results on cross sections with benchmark cuts, differential distributions, details of specific decay channels, and further recent developments. △ Less

Submitted 15 January, 2012; originally announced January 2012.

Comments: 275 pages, 136 figures, to be submitted to CERN Report. Working Group web page: https://twiki.cern.ch/twiki/bin/view/LHCPhysics/CrossSections

Report number: CERN-2012-002

Jet Substructure at the Tevatron and LHC: New results, new tools, new benchmarks

Authors: A. Altheimer, S. Arora, L. Asquith, G. Brooijmans, J. Butterworth, M. Campanelli, B. Chapleau, A. E. Cholakian, J. P. Chou, M. Dasgupta, A. Davison, J. Dolen, S. D. Ellis, R. Essig, J. J. Fan, R. Field, A. Fregoso, J. Gallicchio, Y. Gershtein, A. Gomes, A. Haas, E. Halkiadakis, V. Halyo, S. Hoeche, A. Hook , et al. (46 additional authors not shown)

Abstract: In this report we review recent theoretical progress and the latest experimental results in jet substructure from the Tevatron and the LHC. We review the status of and outlook for calculation and simulation tools for studying jet substructure. Following up on the report of the Boost 2010 workshop, we present a new set of benchmark comparisons of substructure techniques, focusing on the set of vari… ▽ More In this report we review recent theoretical progress and the latest experimental results in jet substructure from the Tevatron and the LHC. We review the status of and outlook for calculation and simulation tools for studying jet substructure. Following up on the report of the Boost 2010 workshop, we present a new set of benchmark comparisons of substructure techniques, focusing on the set of variables and grooming methods that are collectively known as "top taggers". To facilitate further exploration, we have attempted to collect, harmonise, and publish software implementations of these techniques. △ Less

Submitted 25 May, 2012; v1 submitted 29 December, 2011; originally announced January 2012.

Comments: 53 pages, 17 figures. L. Asquith, S. Rappoccio, C. K. Vermilion, editors; v2: minor edits from journal revisions

Journal ref: J.Phys.G G39 (2012) 063001

Four-Jet Production at the Large Hadron Collider at Next-to-Leading Order in QCD

Authors: Z. Bern, G. Diana, L. J. Dixon, F. Febres Cordero, S. Hoeche, D. A. Kosower, H. Ita, D. Maitre, K. Ozeren

Abstract: We present the cross sections for production of up to four jets at the Large Hadron Collider, at next-to-leading order in the QCD coupling. We use the BlackHat library in conjunction with SHERPA and a recently developed algorithm for assembling primitive amplitudes into color-dressed amplitudes. We adopt the cuts used by ATLAS in their study of multi-jet events in pp collisions at \sqrt{s} = 7 TeV… ▽ More We present the cross sections for production of up to four jets at the Large Hadron Collider, at next-to-leading order in the QCD coupling. We use the BlackHat library in conjunction with SHERPA and a recently developed algorithm for assembling primitive amplitudes into color-dressed amplitudes. We adopt the cuts used by ATLAS in their study of multi-jet events in pp collisions at \sqrt{s} = 7 TeV. We include estimates of nonperturbative corrections and compare to ATLAS data. We store intermediate results in a framework that allows the inexpensive computation of additional results for different choices of scale or parton distributions. △ Less

Submitted 21 July, 2012; v1 submitted 16 December, 2011; originally announced December 2011.

Comments: 5 pages, 2 figures, 2 tables. v2: references added, additional discussion of scale and PDF uncertainties, other minor clarifications

Report number: SB/F/402-11, UCLA/11/TEP/111, SLAC-PUB-14837, IPPP/11/82, CERN-PH-TH/2011/304

Journal ref: Phys.Rev.Lett.109:042001,2012

General-purpose event generators for LHC physics

Authors: Andy Buckley, Jonathan Butterworth, Stefan Gieseke, David Grellscheid, Stefan Hoche, Hendrik Hoeth, Frank Krauss, Leif Lonnblad, Emily Nurse, Peter Richardson, Steffen Schumann, Michael H. Seymour, Torbjorn Sjostrand, Peter Skands, Bryan Webber

Abstract: We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on… ▽ More We review the physics basis, main features and use of general-purpose Monte Carlo event generators for the simulation of proton-proton collisions at the Large Hadron Collider. Topics included are: the generation of hard-scattering matrix elements for processes of interest, at both leading and next-to-leading QCD perturbative order; their matching to approximate treatments of higher orders based on the showering approximation; the parton and dipole shower formulations; parton distribution functions for event generators; non-perturbative aspects such as soft QCD collisions, the underlying event and diffractive processes; the string and cluster models for hadron formation; the treatment of hadron and tau decays; the inclusion of QED radiation and beyond-Standard-Model processes. We describe the principal features of the ARIADNE, Herwig++, PYTHIA 8 and SHERPA generators, together with the Rivet and Professor validation and tuning tools, and discuss the physics philosophy behind the proper use of these generators and tools. This review is aimed at phenomenologists wishing to understand better how parton-level predictions are translated into hadron-level events as well as experimentalists wanting a deeper insight into the tools available for signal and background simulation at the LHC. △ Less

Submitted 13 January, 2011; originally announced January 2011.

Comments: 226 pages, 30 figures, submitted to Physics Reports

Report number: Cavendish-HEP-10/21, CERN-PH-TH-2010-298, DCPT/10/202, HD-THEP-10-24, IPPP/10/101, KA-TP-40-2010, LU TP 10-28, MAN/HEP/2010/23, MCnet-11-01, SLAC-PUB-14333