-
Reconstruction and Performance Evaluation of FASER's Emulsion Detector at the LHC
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
Saul Alonso Monsalve,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadou,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Kohei Chinone,
Dhruv Chouhan,
Andrea Coccaro,
Stephane Débieu,
Ansh Desai,
Sergey Dmitrievsky
, et al. (99 additional authors not shown)
Abstract:
This paper presents the reconstruction and performance evaluation of the FASER$ν$ emulsion detector, which aims to measure interactions from neutrinos produced in the forward direction of proton-proton collisions at the CERN Large Hadron Collider. The detector, composed of tungsten plates interleaved with emulsion films, records charged particles with sub-micron precision. A key challenge arises f…
▽ More
This paper presents the reconstruction and performance evaluation of the FASER$ν$ emulsion detector, which aims to measure interactions from neutrinos produced in the forward direction of proton-proton collisions at the CERN Large Hadron Collider. The detector, composed of tungsten plates interleaved with emulsion films, records charged particles with sub-micron precision. A key challenge arises from the extremely high track density environment, reaching $\mathcal{O}(10^5)$ tracks per cm$^2$. To address this, dedicated alignment techniques and track reconstruction algorithms have been developed, building on techniques from previous experiments and introducing further optimizations. The performance of the detector is studied by evaluating the single-film efficiency, position and angular resolution, and the impact parameter distribution of reconstructed vertices. The results demonstrate that an alignment precision of 0.3 micrometers and robust track and vertex reconstruction are achieved, enabling accurate neutrino measurements in the TeV energy range.
△ Less
Submitted 2 May, 2025; v1 submitted 17 April, 2025;
originally announced April 2025.
-
Prospects and Opportunities with an upgraded FASER Neutrino Detector during the HL-LHC era: Input to the EPPSU
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
Saul Alonso-Monsalve,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Dhruv Chouhan,
Sebastiani Christiano,
Andrea Coccaro,
Stephane Débieux,
Monica D'Onofrio,
Ansh Desai
, et al. (93 additional authors not shown)
Abstract:
The FASER experiment at CERN has opened a new window in collider neutrino physics by detecting TeV-energy neutrinos produced in the forward direction at the LHC. Building on this success, this document outlines the scientific case and design considerations for an upgraded FASER neutrino detector to operate during LHC Run 4 and beyond. The proposed detector will significantly enhance the neutrino p…
▽ More
The FASER experiment at CERN has opened a new window in collider neutrino physics by detecting TeV-energy neutrinos produced in the forward direction at the LHC. Building on this success, this document outlines the scientific case and design considerations for an upgraded FASER neutrino detector to operate during LHC Run 4 and beyond. The proposed detector will significantly enhance the neutrino physics program by increasing event statistics, improving flavor identification, and enabling precision measurements of neutrino interactions at the highest man-made energies. Key objectives include measuring neutrino cross sections, probing proton structure and forward QCD dynamics, testing lepton flavor universality, and searching for beyond-the-Standard Model physics. Several detector configurations are under study, including high-granularity scintillator-based tracking calorimeters, high-precision silicon tracking layers, and advanced emulsion-based detectors for exclusive event reconstruction. These upgrades will maximize the physics potential of the HL-LHC, contribute to astroparticle physics and QCD studies, and serve as a stepping stone toward future neutrino programs at the Forward Physics Facility.
△ Less
Submitted 25 March, 2025;
originally announced March 2025.
-
First Measurement of the Muon Neutrino Interaction Cross Section and Flux as a Function of Energy at the LHC with FASER
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Dhruv Chouhan,
Andrea Coccaro,
Stephane Débieux,
Monica D'Onofrio,
Ansh Desai,
Sergey Dmitrievsky,
Radu Dobre
, et al. (85 additional authors not shown)
Abstract:
This letter presents the measurement of the energy-dependent neutrino-nucleon cross section in tungsten and the differential flux of muon neutrinos and anti-neutrinos. The analysis is performed using proton-proton collision data at a center-of-mass energy of $13.6 \, {\rm TeV}$ and corresponding to an integrated luminosity of $(65.6 \pm 1.4) \, \mathrm{fb^{-1}}$. Using the active electronic compon…
▽ More
This letter presents the measurement of the energy-dependent neutrino-nucleon cross section in tungsten and the differential flux of muon neutrinos and anti-neutrinos. The analysis is performed using proton-proton collision data at a center-of-mass energy of $13.6 \, {\rm TeV}$ and corresponding to an integrated luminosity of $(65.6 \pm 1.4) \, \mathrm{fb^{-1}}$. Using the active electronic components of the FASER detector, $338.1 \pm 21.0$ charged current muon neutrino interaction events are identified, with backgrounds from other processes subtracted. We unfold the neutrino events into a fiducial volume corresponding to the sensitive regions of the FASER detector and interpret the results in two ways: We use the expected neutrino flux to measure the cross section, and we use the predicted cross section to measure the neutrino flux. Both results are presented in six bins of neutrino energy, achieving the first differential measurement in the TeV range. The observed distributions align with Standard Model predictions. Using this differential data, we extract the contributions of neutrinos from pion and kaon decays.
△ Less
Submitted 6 May, 2025; v1 submitted 4 December, 2024;
originally announced December 2024.
-
Shining Light on the Dark Sector: Search for Axion-like Particles and Other New Physics in Photonic Final States with FASER
Authors:
FASER collaboration,
Roshan Mammen Abraham,
Xiaocong Ai,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Emma Bianchi,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Eunhyung Cho,
Dhruv Chouhan,
Andrea Coccaro,
Stephane Débieux,
Monica D'Onofrio,
Ansh Desai
, et al. (84 additional authors not shown)
Abstract:
The first FASER search for a light, long-lived particle decaying into a pair of photons is reported. The search uses LHC proton-proton collision data at $\sqrt{s}=13.6~\text{TeV}$ collected in 2022 and 2023, corresponding to an integrated luminosity of $57.7\text{fb}^{-1}$. A model with axion-like particles (ALPs) dominantly coupled to weak gauge bosons is the primary target. Signal events are cha…
▽ More
The first FASER search for a light, long-lived particle decaying into a pair of photons is reported. The search uses LHC proton-proton collision data at $\sqrt{s}=13.6~\text{TeV}$ collected in 2022 and 2023, corresponding to an integrated luminosity of $57.7\text{fb}^{-1}$. A model with axion-like particles (ALPs) dominantly coupled to weak gauge bosons is the primary target. Signal events are characterised by high-energy deposits in the electromagnetic calorimeter and no signal in the veto scintillators. One event is observed, compared to a background expectation of $0.44 \pm 0.39$ events, which is entirely dominated by neutrino interactions. World-leading constraints on ALPs are obtained for masses up to $300~\text{MeV}$ and couplings to the Standard Model W gauge boson, $g_{aWW}$, around $10^{-4}$ GeV$^{-1}$, testing a previously unexplored region of parameter space. Other new particle models that lead to the same experimental signature, including ALPs coupled to gluons or photons, U(1)$_B$ gauge bosons, up-philic scalars, and a Type-I two-Higgs doublet model, are also considered for interpretation, and new constraints on previously viable parameter space are presented in this paper.
△ Less
Submitted 17 December, 2024; v1 submitted 14 October, 2024;
originally announced October 2024.
-
First Measurement of the $ν_e$ and $ν_μ$ Interaction Cross Sections at the LHC with FASER's Emulsion Detector
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Stephane Debieux,
Monica D'Onofrio,
Ansh Desai,
Sergey Dmitrievsky,
Sinead Eley,
Yannick Favre,
Deion Fellers
, et al. (80 additional authors not shown)
Abstract:
This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated lumin…
▽ More
This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated luminosity of 9.5 fb$^{-1}$. Applying stringent selections requiring electrons with reconstructed energy above 200~GeV, four electron neutrino interaction candidate events are observed with an expected background of $0.025^{+0.015}_{-0.010}$, leading to a statistical significance of 5.2$σ$. This is the first direct observation of electron neutrino interactions at a particle collider. Eight muon neutrino interaction candidate events are also detected, with an expected background of $0.22^{+0.09}_{-0.07}$, leading to a statistical significance of 5.7$σ$. The signal events include neutrinos with energies in the TeV range, the highest-energy electron and muon neutrinos ever detected from an artificial source. The energy-independent part of the interaction cross section per nucleon is measured over an energy range of 560--1740 GeV (520--1760 GeV) for $ν_e$ ($ν_μ$) to be $(1.2_{-0.7}^{+0.8}) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$ ($(0.5\pm0.2) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$), consistent with Standard Model predictions. These are the first measurements of neutrino interaction cross sections in those energy ranges.
△ Less
Submitted 15 July, 2024; v1 submitted 19 March, 2024;
originally announced March 2024.
-
Neutrino Rate Predictions for FASER
Authors:
FASER Collaboration,
Roshan Mammen Abraham,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Angela Burger,
Franck Cadoux,
Roberto Cardella,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Stephane Débieux,
Monica D'Onofrio,
Ansh Desai,
Sergey Dmitrievsky,
Sinead Eley,
Yannick Favre,
Deion Fellers
, et al. (75 additional authors not shown)
Abstract:
The Forward Search Experiment (FASER) at CERN's Large Hadron Collider (LHC) has recently directly detected the first collider neutrinos. Neutrinos play an important role in all FASER analyses, either as signal or background, and it is therefore essential to understand the neutrino event rates. In this study, we update previous simulations and present prescriptions for theoretical predictions of ne…
▽ More
The Forward Search Experiment (FASER) at CERN's Large Hadron Collider (LHC) has recently directly detected the first collider neutrinos. Neutrinos play an important role in all FASER analyses, either as signal or background, and it is therefore essential to understand the neutrino event rates. In this study, we update previous simulations and present prescriptions for theoretical predictions of neutrino fluxes and cross sections, together with their associated uncertainties. With these results, we discuss the potential for possible measurements that could be carried out in the coming years with the FASER neutrino data to be collected in LHC Run 3 and Run 4.
△ Less
Submitted 13 June, 2024; v1 submitted 20 February, 2024;
originally announced February 2024.
-
First Direct Observation of Collider Neutrinos with FASER at the LHC
Authors:
FASER Collaboration,
Henso Abreu,
John Anders,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jeremy Atkinson,
Florian U. Bernlochner,
Tobias Blesgen,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Ansh Desai,
Sergey Dmitrievsky,
Monica D'Onofrio,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Carlo Alberto Fenoglio,
Didier Ferrere
, et al. (63 additional authors not shown)
Abstract:
We report the first direct observation of neutrino interactions at a particle collider experiment. Neutrino candidate events are identified in a 13.6 TeV center-of-mass energy $pp$ collision data set of 35.4 fb${}^{-1}$ using the active electronic components of the FASER detector at the Large Hadron Collider. The candidates are required to have a track propagating through the entire length of the…
▽ More
We report the first direct observation of neutrino interactions at a particle collider experiment. Neutrino candidate events are identified in a 13.6 TeV center-of-mass energy $pp$ collision data set of 35.4 fb${}^{-1}$ using the active electronic components of the FASER detector at the Large Hadron Collider. The candidates are required to have a track propagating through the entire length of the FASER detector and be consistent with a muon neutrino charged-current interaction. We infer $153^{+12}_{-13}$ neutrino interactions with a significance of 16 standard deviations above the background-only hypothesis. These events are consistent with the characteristics expected from neutrino interactions in terms of secondary particle production and spatial distribution, and they imply the observation of both neutrinos and anti-neutrinos with an incident neutrino energy of significantly above 200 GeV.
△ Less
Submitted 21 August, 2023; v1 submitted 24 March, 2023;
originally announced March 2023.
-
The FASER Detector
Authors:
FASER Collaboration,
Henso Abreu,
Elham Amin Mansour,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Olivier Crespo-Lopez,
Stephane Debieux,
Monica D'Onofrio,
Liam Dougherty,
Candan Dozen,
Abdallah Ezzat,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere
, et al. (72 additional authors not shown)
Abstract:
FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned…
▽ More
FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned with the beam collisions axis. FASER also includes a sub-detector, FASER$ν$, designed to detect neutrinos produced in the LHC collisions and to study their properties. In this paper, each component of the FASER detector is described in detail, as well as the installation of the experiment system and its commissioning using cosmic-rays collected in September 2021 and during the LHC pilot beam test carried out in October 2021. FASER will start taking LHC collision data in 2022, and will run throughout LHC Run 3.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
The tracking detector of the FASER experiment
Authors:
FASER Collaboration,
Henso Abreu,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Olivier Crespo-Lopez,
Sergey Dmitrievsky,
Monica D'Onofrio,
Candan Dozen,
Abdallah Ezzat,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Stephen Gibson,
Sergio Gonzalez-Sevilla
, et al. (55 additional authors not shown)
Abstract:
FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constru…
▽ More
FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constructed from silicon microstrip detectors. Three of the tracker stations form a tracking spectrometer, and enable FASER to detect the decay products of LLPs decaying inside the apparatus, whereas the fourth station is used for the neutrino analysis. The spectrometer has been installed in the LHC complex since March 2021, while the fourth station is not yet installed. FASER will start physics data taking when the LHC resumes operation in early 2022. This paper describes the design, construction and testing of the tracking spectrometer, including the associated components such as the mechanics, readout electronics, power supplies and cooling system.
△ Less
Submitted 31 May, 2022; v1 submitted 2 December, 2021;
originally announced December 2021.
-
The trigger and data acquisition system of the FASER experiment
Authors:
FASER Collaboration,
Henso Abreu,
Elham Amin Mansour,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David Casper,
Charlotte Cavanagh,
Xin Chen,
Andrea Coccaro,
Stephane Debieux,
Sergey Dmitrievsky,
Monica D'Onofrio,
Candan Dozen,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Enrico Gamberini,
Edward Karl Galantay
, et al. (59 additional authors not shown)
Abstract:
The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction…
▽ More
The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction point. A very high efficiency trigger and data acquisition system is required to ensure that the physics events of interest will be recorded. This paper describes the trigger and data acquisition system of the FASER experiment and presents performance results of the system acquired during initial commissioning.
△ Less
Submitted 10 January, 2022; v1 submitted 28 October, 2021;
originally announced October 2021.
-
First neutrino interaction candidates at the LHC
Authors:
FASER Collaboration,
Henso Abreu,
Yoav Afik,
Claire Antel,
Jason Arakawa,
Akitaka Ariga,
Tomoko Ariga,
Florian Bernlochner,
Tobias Boeckh,
Jamie Boyd,
Lydia Brenner,
Franck Cadoux,
David W. Casper,
Charlotte Cavanagh,
Francesco Cerutti,
Xin Chen,
Andrea Coccaro,
Monica D'Onofrio,
Candan Dozen,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Stephen Gibson,
Sergio Gonzalez-Sevilla
, et al. (51 additional authors not shown)
Abstract:
FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision…
▽ More
FASER$ν$ at the CERN Large Hadron Collider (LHC) is designed to directly detect collider neutrinos for the first time and study their cross sections at TeV energies, where no such measurements currently exist. In 2018, a pilot detector employing emulsion films was installed in the far-forward region of ATLAS, 480 m from the interaction point, and collected 12.2 fb$^{-1}$ of proton-proton collision data at a center-of-mass energy of 13 TeV. We describe the analysis of this pilot run data and the observation of the first neutrino interaction candidates at the LHC. This milestone paves the way for high-energy neutrino measurements at current and future colliders.
△ Less
Submitted 26 October, 2021; v1 submitted 13 May, 2021;
originally announced May 2021.
-
Measurements of Single Event Upset in ATLAS IBL
Authors:
G. Balbi,
M. Barbero,
R. Beccherle,
M. Bindi,
P. Breugnon,
P. Butti,
D. Cinca,
J. Dickinson,
D. Ferrere,
D. Fougeron,
M. Garcia-Sciveres,
J. Garcia Pascual,
A. Gaudiello,
C. Gemme,
N. Giangiacomi,
T. Hemperek,
L. Jeanty,
O. Kepka,
M. Kocian,
K. Lantzsch,
P. Liu,
C. Martin,
A. Mekkaoui,
M. Menouni,
K. Potamianos
, et al. (3 additional authors not shown)
Abstract:
Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulati…
▽ More
Effects of Single Event Upsets (SEU) and Single Event Transients (SET) are studied in the FE-I4B chip of the innermost layer of the ATLAS pixel system. SEU/SET affect the FE-I4B Global Registers as well as the settings for the individual pixels, causing, among other things, occupancy losses, drops in the low voltage currents, noisy pixels, and silent pixels. Quantitative data analysis and simulations indicate that SET dominate over SEU on the load line of the memory. Operational issues and mitigation techniques are presented.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Technical Proposal: FASERnu
Authors:
FASER Collaboration,
Henso Abreu,
Marco Andreini,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Caterina Bertone,
Jamie Boyd,
Andy Buckley,
Franck Cadoux,
David W. Casper,
Francesco Cerutti,
Xin Chen,
Andrea Coccaro,
Salvatore Danzeca,
Liam Dougherty,
Candan Dozen,
Peter B. Denton,
Yannick Favre,
Deion Fellers,
Jonathan L. Feng,
Didier Ferrere,
Jonathan Gall,
Iftah Galon,
Stephen Gibson
, et al. (47 additional authors not shown)
Abstract:
FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutri…
▽ More
FASERnu is a proposed small and inexpensive emulsion detector designed to detect collider neutrinos for the first time and study their properties. FASERnu will be located directly in front of FASER, 480 m from the ATLAS interaction point along the beam collision axis in the unused service tunnel TI12. From 2021-23 during Run 3 of the 14 TeV LHC, roughly 1,300 electron neutrinos, 20,000 muon neutrinos, and 20 tau neutrinos will interact in FASERnu with TeV-scale energies. With the ability to observe these interactions, reconstruct their energies, and distinguish flavors, FASERnu will probe the production, propagation, and interactions of neutrinos at the highest human-made energies ever recorded. The FASERnu detector will be composed of 1000 emulsion layers interleaved with tungsten plates. The total volume of the emulsion and tungsten is 25cm x 25cm x 1.35m, and the tungsten target mass is 1.2 tonnes. From 2021-23, 7 sets of emulsion layers will be installed, with replacement roughly every 20-50 1/fb in planned Technical Stops. In this document, we summarize FASERnu's physics goals and discuss the estimates of neutrino flux and interaction rates. We then describe the FASERnu detector in detail, including plans for assembly, transport, installation, and emulsion replacement, and procedures for emulsion readout and analyzing the data. We close with cost estimates for the detector components and infrastructure work and a timeline for the experiment.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Detecting and Studying High-Energy Collider Neutrinos with FASER at the LHC
Authors:
FASER Collaboration,
Henso Abreu,
Claire Antel,
Akitaka Ariga,
Tomoko Ariga,
Jamie Boyd,
Franck Cadoux,
David W. Casper,
Xin Chen,
Andrea Coccaro,
Candan Dozen,
Peter B. Denton,
Yannick Favre,
Jonathan L. Feng,
Didier Ferrere,
Iftah Galon,
Stephen Gibson,
Sergio Gonzalez-Sevilla,
Shih-Chieh Hsu,
Zhen Hu,
Giuseppe Iacobucci,
Sune Jakobsen,
Roland Jansky,
Enrique Kajomovitz,
Felix Kling
, et al. (23 additional authors not shown)
Abstract:
Neutrinos are copiously produced at particle colliders, but no collider neutrino has ever been detected. Colliders, and particularly hadron colliders, produce both neutrinos and anti-neutrinos of all flavors at very high energies, and they are therefore highly complementary to those from other sources. FASER, the recently approved Forward Search Experiment at the Large Hadron Collider, is ideally…
▽ More
Neutrinos are copiously produced at particle colliders, but no collider neutrino has ever been detected. Colliders, and particularly hadron colliders, produce both neutrinos and anti-neutrinos of all flavors at very high energies, and they are therefore highly complementary to those from other sources. FASER, the recently approved Forward Search Experiment at the Large Hadron Collider, is ideally located to provide the first detection and study of collider neutrinos. We investigate the prospects for neutrino studies of a proposed component of FASER, FASER$ν$, a 25cm x 25cm x 1.35m emulsion detector to be placed directly in front of the FASER spectrometer in tunnel TI12. FASER$ν$ consists of 1000 layers of emulsion films interleaved with 1-mm-thick tungsten plates, with a total tungsten target mass of 1.2 tons. We estimate the neutrino fluxes and interaction rates at FASER$ν$, describe the FASER$ν$ detector, and analyze the characteristics of the signals and primary backgrounds. For an integrated luminosity of 150 fb$^{-1}$ to be collected during Run 3 of the 14 TeV Large Hadron Collider from 2021-23, and assuming standard model cross sections, approximately 1300 electron neutrinos, 20,000 muon neutrinos, and 20 tau neutrinos will interact in FASER$ν$, with mean energies of 600 GeV to 1 TeV, depending on the flavor. With such rates and energies, FASER will measure neutrino cross sections at energies where they are currently unconstrained, will bound models of forward particle production, and could open a new window on physics beyond the standard model.
△ Less
Submitted 20 February, 2020; v1 submitted 6 August, 2019;
originally announced August 2019.
-
FASER: ForwArd Search ExpeRiment at the LHC
Authors:
FASER Collaboration,
Akitaka Ariga,
Tomoko Ariga,
Jamie Boyd,
Franck Cadoux,
David W. Casper,
Yannick Favre,
Jonathan L. Feng,
Didier Ferrere,
Iftah Galon,
Sergio Gonzalez-Sevilla,
Shih-Chieh Hsu,
Giuseppe Iacobucci,
Enrique Kajomovitz,
Felix Kling,
Susanne Kuehn,
Lorne Levinson,
Hidetoshi Otono,
Brian Petersen,
Osamu Sato,
Matthias Schott,
Anna Sfyrla,
Jordan Smolinsky,
Aaron M. Soffa,
Yosuke Takubo
, et al. (3 additional authors not shown)
Abstract:
FASER, the ForwArd Search ExpeRiment, is a proposed experiment dedicated to searching for light, extremely weakly-interacting particles at the LHC. Such particles may be produced in the LHC's high-energy collisions in large numbers in the far-forward region and then travel long distances through concrete and rock without interacting. They may then decay to visible particles in FASER, which is plac…
▽ More
FASER, the ForwArd Search ExpeRiment, is a proposed experiment dedicated to searching for light, extremely weakly-interacting particles at the LHC. Such particles may be produced in the LHC's high-energy collisions in large numbers in the far-forward region and then travel long distances through concrete and rock without interacting. They may then decay to visible particles in FASER, which is placed 480 m downstream of the ATLAS interaction point. In this work, we describe the FASER program. In its first stage, FASER is an extremely compact and inexpensive detector, sensitive to decays in a cylindrical region of radius R = 10 cm and length L = 1.5 m. FASER is planned to be constructed and installed in Long Shutdown 2 and will collect data during Run 3 of the 14 TeV LHC from 2021-23. If FASER is successful, FASER 2, a much larger successor with roughly R ~ 1 m and L ~ 5 m, could be constructed in Long Shutdown 3 and collect data during the HL-LHC era from 2026-35. FASER and FASER 2 have the potential to discover dark photons, dark Higgs bosons, heavy neutral leptons, axion-like particles, and many other long-lived particles, as well as provide new information about neutrinos, with potentially far-ranging implications for particle physics and cosmology. We describe the current status, anticipated challenges, and discovery prospects of the FASER program.
△ Less
Submitted 11 January, 2019;
originally announced January 2019.
-
Technical Proposal for FASER: ForwArd Search ExpeRiment at the LHC
Authors:
FASER Collaboration,
Akitaka Ariga,
Tomoko Ariga,
Jamie Boyd,
Franck Cadoux,
David W. Casper,
Francesco Cerutti,
Salvatore Danzeca,
Liam Dougherty,
Yannick Favre,
Jonathan L. Feng,
Didier Ferrere,
Jonathan Gall,
Iftah Galon,
Sergio Gonzalez-Sevilla,
Shih-Chieh Hsu,
Giuseppe Iacobucci,
Enrique Kajomovitz,
Felix Kling,
Susanne Kuehn,
Mike Lamont,
Lorne Levinson,
Hidetoshi Otono,
John Osborne,
Brian Petersen
, et al. (11 additional authors not shown)
Abstract:
FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATL…
▽ More
FASER is a proposed small and inexpensive experiment designed to search for light, weakly-interacting particles during Run 3 of the LHC from 2021-23. Such particles may be produced in large numbers along the beam collision axis, travel for hundreds of meters without interacting, and then decay to standard model particles. To search for such events, FASER will be located 480 m downstream of the ATLAS IP in the unused service tunnel TI12 and be sensitive to particles that decay in a cylindrical volume with radius R=10 cm and length L=1.5 m. FASER will complement the LHC's existing physics program, extending its discovery potential to a host of new, light particles, with potentially far-reaching implications for particle physics and cosmology.
This document describes the technical details of the FASER detector components: the magnets, the tracker, the scintillator system, and the calorimeter, as well as the trigger and readout system. The preparatory work that is needed to install and operate the detector, including civil engineering, transport, and integration with various services is also presented. The information presented includes preliminary cost estimates for the detector components and the infrastructure work, as well as a timeline for the design, construction, and installation of the experiment.
△ Less
Submitted 21 December, 2018;
originally announced December 2018.
-
FASER's Physics Reach for Long-Lived Particles
Authors:
FASER Collaboration,
Akitaka Ariga,
Tomoko Ariga,
Jamie Boyd,
Franck Cadoux,
David W. Casper,
Yannick Favre,
Jonathan L. Feng,
Didier Ferrere,
Iftah Galon,
Sergio Gonzalez-Sevilla,
Shih-Chieh Hsu,
Giuseppe Iacobucci,
Enrique Kajomovitz,
Felix Kling,
Susanne Kuehn,
Lorne Levinson,
Hidetoshi Otono,
Brian Petersen,
Osamu Sato,
Matthias Schott,
Anna Sfyrla,
Jordan Smolinsky,
Aaron M. Soffa,
Yosuke Takubo
, et al. (3 additional authors not shown)
Abstract:
FASER,the ForwArd Search ExpeRiment,is a proposed experiment dedicated to searching for light, extremely weakly-interacting particles at the LHC. Such particles may be produced in the LHC's high-energy collisions and travel long distances through concrete and rock without interacting. They may then decay to visible particles in FASER, which is placed 480 m downstream of the ATLAS interaction point…
▽ More
FASER,the ForwArd Search ExpeRiment,is a proposed experiment dedicated to searching for light, extremely weakly-interacting particles at the LHC. Such particles may be produced in the LHC's high-energy collisions and travel long distances through concrete and rock without interacting. They may then decay to visible particles in FASER, which is placed 480 m downstream of the ATLAS interaction point. In this work we briefly describe the FASER detector layout and the status of potential backgrounds. We then present the sensitivity reach for FASER for a large number of long-lived particle models, updating previous results to a uniform set of detector assumptions, and analyzing new models. In particular, we consider all of the renormalizable portal interactions, leading to dark photons, dark Higgs bosons, and heavy neutral leptons (HNLs); light B-L and $L_i - L_j$ gauge bosons; axion-like particles (ALPs) that are coupled dominantly to photons, fermions, and gluons through non-renormalizable operators; and pseudoscalars with Yukawa-like couplings. We find that FASER and its follow-up, FASER 2, have a full physics program, with discovery sensitivity in all of these models and potentially far-reaching implications for particle physics and cosmology.
△ Less
Submitted 15 May, 2019; v1 submitted 29 November, 2018;
originally announced November 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Results of the 2015 testbeam of a 180 nm AMS High-Voltage CMOS sensor prototype
Authors:
M. Benoit,
J. Bilbao de Mendizabal,
G. Casse,
H. Chen,
K. Chen,
F. A. Di Bello,
D. Ferrere,
T. Golling,
S. Gonzalez-Sevilla,
G. Iacobucci,
F. Lanni,
H. Liu,
F. Meloni,
L. Meng,
A. Miucci,
D. Muenstermann,
M. Nessi,
I. Peric,
M. Rimoldi,
B. Ristic,
M. Vicente Barrero Pinto,
J. Vossebeld,
M. Weber,
W. Wu,
L. Xu
Abstract:
Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of track…
▽ More
Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of tracking efficiency and timing performance, for different threshold and bias conditions, are shown.
△ Less
Submitted 30 June, 2016; v1 submitted 24 March, 2016;
originally announced March 2016.
-
The FE-I4 Telescope for particle tracking in testbeam experiments
Authors:
M. Benoit,
J. Bilbao De Mendizabal,
F. A. Di Bello,
D. Ferrere,
T. Golling,
S. Gonzalez-Sevilla,
G. Iacobucci,
M. Kocian,
D. Muenstermann,
B. Ristic,
A. Sciuccati
Abstract:
A testbeam telescope, based on ATLAS IBL silicon pixel modules, has been built. It comprises six planes of planar silicon sensors with 250 x 50 um^2 pitch, read out by ATLAS FE-I4 chips. In the CERN SPS H8 beamline (180 GeV pi+) a resolution of better than 8 x 12 um^2 at the position of the device under test was achieved. The telescope reached a trigger rate of 6kHz with two measured devices. It i…
▽ More
A testbeam telescope, based on ATLAS IBL silicon pixel modules, has been built. It comprises six planes of planar silicon sensors with 250 x 50 um^2 pitch, read out by ATLAS FE-I4 chips. In the CERN SPS H8 beamline (180 GeV pi+) a resolution of better than 8 x 12 um^2 at the position of the device under test was achieved. The telescope reached a trigger rate of 6kHz with two measured devices. It is mainly designed for studies using FE-I4 based prototypes, but has also been successfully run with independent DAQ systems. Specialised trigger schemes ensure data synchronisation between these external devices and the telescope. A region-of-interest trigger can be formed by setting masks on the first and the last pixel sensor planes. The setup infrastructure provides centrally controlled and monitored high and low voltage power supplies, silicon oil cooling, temperature and humidity sensors and movable stages.
△ Less
Submitted 20 June, 2016; v1 submitted 24 March, 2016;
originally announced March 2016.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam
Authors:
A. Ahmad,
A. Andreazza,
T. Atkinson,
J. Baines,
A. J. Barr,
R. Beccherle,
P. J. Bell,
J. Bernabeu,
Z. Broklova,
P. A. Bruckman de Renstrom,
D. Cauz,
L. Chevalier,
S. Chouridou,
M. Citterio,
A. Clark,
M. Cobal,
T. Cornelissen,
S. Correard,
M. J. Costa,
D. Costanzo,
S. Cuneo,
M. Dameri,
G. Darbo,
J. B. de Vivie,
B. Di Girolamo
, et al. (104 additional authors not shown)
Abstract:
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated u…
▽ More
A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate.
△ Less
Submitted 26 May, 2008;
originally announced May 2008.