TCP/IP based Remote Firmware Upgradation for INO ICAL RPC-DAQ Modules
Authors:
Yuvaraj Elangovan,
Mandar Saraf,
B. Satyanarayana,
S. S. Upadhya,
Nagaraj Panyam,
Ravindra Shinde,
Gobinda Majumder,
D. Sil,
Pathaleswar,
Aditya Deodhar,
K. C. Ravindran
Abstract:
The INO ICAL (India-based Neutrino Observatory Iron Calorimeter) experiment is an upcoming mega-science project currently in the developmental stages. This initiative employs over 28,800 Resistive Plate Chambers (RPC) based charged particle detectors used for tracking muon events. Each of these detectors incorporates an FPGA-based Digital Front End known as RPC-DAQ, with the primary objective of m…
▽ More
The INO ICAL (India-based Neutrino Observatory Iron Calorimeter) experiment is an upcoming mega-science project currently in the developmental stages. This initiative employs over 28,800 Resistive Plate Chambers (RPC) based charged particle detectors used for tracking muon events. Each of these detectors incorporates an FPGA-based Digital Front End known as RPC-DAQ, with the primary objective of measuring the position and timing of particle interactions within the respective RPCs. The firmware embedded in the RPC-DAQ FPGA is designed to support this logic. The ICAL experiment is a 50-kiloton iron structure arranged in a stacked geometry where the RPCs along with their associated electronics are positioned between these iron plates. Reprogramming individual or groups of RPC-DAQs proves to be a challenging and time consuming task. To address the complexity of upgrading firmware for these typically inaccessible RPC-DAQs this paper introduces an innovative approach that utilizes the existing Ethernet interface, employed for command transmission and data acquisition to upload firmware. A customized handshaking architecture has been designed using the TCP protocol for this experiment. The firmware binary file is segmented into TCP packets and transmitted over Ethernet. The soft-core processor instantiated in the RPC-DAQ FPGA receives these firmware packets overwriting the existing firmware in the flash memory. Upon rebooting the RPC-DAQ configures the new firmware on the FPGA. The entire firmware upgrade process takes around 13 seconds to configure 10 RPC-DAQs. This paper explains the details of the architecture governing the firmware upgrade process and providing a comprehensive understanding of its mechanics.
△ Less
Submitted 3 March, 2025;
originally announced March 2025.
Design, fabrication and large scale qualification of cosmic muon veto scintillator detectors
Authors:
Mandar Saraf,
Pandi Raj Chinnappan,
Aditya Deodhar,
Mamta Jangra,
J. Krishnamoorthi,
Gobinda Majumder,
Veera Padmavathy,
K. C. Ravindran,
Raj Bhupen Shah,
Ravindra Shinde,
B. Satyanarayana
Abstract:
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare int…
▽ More
The INO collaboration is designing a cosmic muon veto detector (CMVD) to cover the mini-ICAL detector which is operational at the IICHEP transit campus, Madurai in South India. The aim of the CMVD is to study the feasibility of building an experiment to record rare events at a shallow depth of around 100 m, and use plastic scintillators to veto atmospheric muons from those produced by the rare interactions within the target mass of the detector. The efficiency of such a veto detector should be better than 99.99% and false positive rate of less than $10^{-5}$.
The CMVD is being built using extruded plastic scintillator (EPS) strips to detect and tag atmospheric muons. More than 700 EPS strips are required to build the CMVD. Two EPS strips are pasted together to make a di-counter (DC) and wavelength shifting fibres are embedded inside the EPS strips to trap the scintillation light generated by a passing cosmic ray muon and transmit it as secondary photons to the Silicon Photo-Multipliers (SiPMs) mounted at the two ends of the DCs. Since the efficiency requirement of the veto detector is rather high, it is imperative to thoroughly test each and every component used for building the CMVD. A cosmic ray muon telescope has been setup using the DCs to qualify all the DCs that will be fabricated. In this paper we will discuss the details of the design and fabrication of the DCs, and the cosmic muon setup and the electronics used for their testing and the test results.
△ Less
Submitted 4 May, 2023; v1 submitted 29 January, 2023;
originally announced January 2023.
