Mechanical strength investigations of the APPLE-X undulator using Fiber Bragg Grating strain measurements
Authors:
I. Balossino,
A. Polimadei,
M. Del Franco,
A. Selce,
A. Vannozzi,
E. Di Pasquale,
L. Giannessi,
F. Nguyen,
A. Petralia,
J. Pockar,
U. Primozic,
R. Geometrante,
M. A. Caponero,
L. Sabbatini
Abstract:
The SPARC_LAB facility at the INFN LNF is being upgraded to accommodate a new user facility as part of the SABINA project. It was set up to investigate the feasibility of an ultra-brilliant photoinjector and to perform FEL experiments. The new beamline is equipped with three APPLE-X undulators acting as amplifiers to deliver IR/THz radiation with photon pulses in the ps range, with energy of tens…
▽ More
The SPARC_LAB facility at the INFN LNF is being upgraded to accommodate a new user facility as part of the SABINA project. It was set up to investigate the feasibility of an ultra-brilliant photoinjector and to perform FEL experiments. The new beamline is equipped with three APPLE-X undulators acting as amplifiers to deliver IR/THz radiation with photon pulses in the ps range, with energy of tens of uJ, and with linear, circular, or elliptical polarization. The APPLE-X guarantees to vary the gap amplitude between the magnets arrays and their relative phase. The entire system has been designed from scratch, and a structural analysis has been carried out. Once they were in Frascati, in collaboration with ENEA, a further investigation campaign was launched on the mechanical, using strain measurements based on optical methods. FBG sensors were suitable for these tests due to their immunity to electromagnetic noise. They consist of a phase grating inscribed in the core of a single-mode fiber, whose Bragg-diffracted light propagates back along the fiber. If bonded to the mechanical structure, they can be used as strain sensors. By following the variations in the scattered spectrum, it is possible to perform strain measurements. Using multiple FBGs applied at selected locations on the undulator, several measurements were while opening and closing the gap or changing the phase, but also by studying the quiescent response as a function of the ambient temperature. The results of these tests show that there is a clear deformation of the structure related to the temperature changes and magnetic forces, but the magnitude of this deformation is well within the tolerances required for the functionality of the undulator since they are compatible or lower with respect to the one calculated with the finite elements methods. The tests confirm the reliability of the mechanical structure.
△ Less
Submitted 3 April, 2025; v1 submitted 20 January, 2025;
originally announced January 2025.
Identification of low energy nuclear recoils in a gas TPC with optical readout
Authors:
Elisabetta Baracchini,
Luigi Benussi,
Stefano Bianco,
Cesidio Capoccia,
Michele Arturo Caponero,
Gianluca Cavoto,
Andre Cortez,
Igor Abritta Costa,
Emanuele Di Marco,
Giulia D'Imperio,
Giorgio Dho,
Fabrizio Iacoangeli,
Giovanni Maccarrone,
Michela Marafini,
Giovanni Mazzitelli,
Andrea Messina,
Rafael Antunes Nobrega,
Aldo Orlandi,
Emiliano Paoletti,
Luciano Passamonti,
Fabrizio Petrucci,
Davide Piccolo,
Daniele Pierluigi,
Davide Pinci,
Francesco Renga
, et al. (5 additional authors not shown)
Abstract:
The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to th…
▽ More
The search for a novel technology able to detect and reconstruct nuclear recoil events in the keV energy range has become more and more important as long as vast regions of high mass WIMP-like Dark Matter candidate have been excluded. Gaseous Time Projection Chambers (TPC) with optical readout are very promising candidate combining the complete event information provided by the TPC technique to the high sensitivity and granularity of last generation scientific light sensors. A TPC with an amplification at the anode obtained with Gas Electron Multipliers (GEM) was tested at the Laboratori Nazionali di Frascati. Photons and neutrons from radioactive sources were employed to induce recoiling nuclei and electrons with kinetic energy in the range [1-100] keV. A He-CF4 (60/40) gas mixture was used at atmospheric pressure and the light produced during the multiplication in the GEM channels was acquired by a high position resolution and low noise scientific CMOS camera and a photomultiplier. A multi-stage pattern recognition algorithm based on an advanced clustering technique is presented here. A number of cluster shape observables are used to identify nuclear recoils induced by neutrons originated from a AmBe source against X-ray 55Fe photo-electrons. An efficiency of 18% to detect nuclear recoils with an energy of about 6 keV is reached obtaining at the same time a 96% 55Fe photo-electrons suppression. This makes this optically readout gas TPC a very promising candidate for future investigations of ultra-rare events as directional direct Dark Matter searches.
△ Less
Submitted 27 October, 2021; v1 submitted 24 July, 2020;
originally announced July 2020.
