-
Experimental Study of Rare Kaon Decays at J-PARC with KOTO and KOTO II
Authors:
J. K. Ahn,
E. Augustine,
L. Bandiera,
J. Bian,
F. Brizioli,
N. Canale,
G. A. Carini,
V. Chobanova,
G. D'Ambrosio,
J. B. Dainton,
S. De Capua,
P. Fedeli,
A. Gianoli,
A. Glazov,
M. Gonzalez,
E. Goudzovski,
M. Homma,
Y. B. Hsiung,
T. Husek,
A. M. Iyer,
E. J. Kim,
C. Kim,
T. K. Komatsubara,
K. Kotera,
M. Kreps
, et al. (40 additional authors not shown)
Abstract:
The rare kaon decay $K_L\toπ^0ν\barν$ is extremely sensitive to new physics, because the contribution to this decay in the Standard Model (SM) is highly suppressed and known very accurately; the branching ratio is $3\times 10^{-11}$ in the SM with a theoretical uncertainty of just 2%. The measurement of this branching ratio could provide essential new information about the flavor structure of the…
▽ More
The rare kaon decay $K_L\toπ^0ν\barν$ is extremely sensitive to new physics, because the contribution to this decay in the Standard Model (SM) is highly suppressed and known very accurately; the branching ratio is $3\times 10^{-11}$ in the SM with a theoretical uncertainty of just 2%. The measurement of this branching ratio could provide essential new information about the flavor structure of the quark sector from the $s\to d$ transition. The decay is being searched for in the KOTO experiment at J-PARC, which has obtained the current best upper limit on the branching ratio of $2.2\times 10^{-9}$; a sensitivity to branching ratios below $10^{-10}$ is achievable by the end of the decade. A next-generation experiment at J-PARC, KOTO II, was proposed in 2024 with 82 members worldwide, including significant contributions from European members. The goal of KOTO II is to measure the $K_L\toπ^0ν\barν$ branching ratio with sensitivity below $10^{-12}$ in the 2030s. Discovery of the decay with $5σ$ significance is achievable at the SM value of the branching ratio. An indication of new physics with a significance of 90% is possible if the observed branching ratio differs by 40% from the SM value. Another important goal of KOTO II is to measure the branching ratio of the unobserved $K_L\to π^0e^+e^-$ decay, which can give an input to flavor structures of new physics. Other rare $K_L$ decays and hidden-sector particles are also in the scope of the study. After 2026, KOTO will be the only dedicated rare kaon decay experiment in the world, and KOTO II is the only future rare kaon decay project currently proposed. We would like to lead a global initiative for the experimental study of rare kaon decays, with significant contributions and support from the European community.
△ Less
Submitted 5 May, 2025;
originally announced May 2025.
-
Kaon Physics: A Cornerstone for Future Discoveries
Authors:
Jason Aebischer,
Atakan Tugberk Akmete,
Riccardo Aliberti,
Wolfgang Altmannshofer,
Fabio Ambrosino,
Roberto Ammendola,
Antonella Antonelli,
Giuseppina Anzivino,
Saiyad Ashanujjaman,
Laura Bandiera,
Damir Becirevic,
Véronique Bernard,
Johannes Bernhard,
Cristina Biino,
Johan Bijnens,
Monika Blanke,
Brigitte Bloch-Devaux,
Marzia Bordone,
Peter Boyle,
Alexandru Mario Bragadireanu,
Francesco Brizioli,
Joachim Brod,
Andrzej J. Buras,
Dario Buttazzo,
Nicola Canale
, et al. (131 additional authors not shown)
Abstract:
The kaon physics programme, long heralded as a cutting-edge frontier by the European Strategy for Particle Physics, continues to stand at the intersection of discovery and innovation in high-energy physics (HEP). With its unparalleled capacity to explore new physics at the multi-TeV scale, kaon research is poised to unveil phenomena that could reshape our understanding of the Universe. This docume…
▽ More
The kaon physics programme, long heralded as a cutting-edge frontier by the European Strategy for Particle Physics, continues to stand at the intersection of discovery and innovation in high-energy physics (HEP). With its unparalleled capacity to explore new physics at the multi-TeV scale, kaon research is poised to unveil phenomena that could reshape our understanding of the Universe. This document highlights the compelling physics case, with emphasis on exciting new opportunities for advancing kaon physics not only in Europe but also on a global stage. As an important player in the future of HEP, the kaon programme promises to drive transformative breakthroughs, inviting exploration at the forefront of scientific discovery.
△ Less
Submitted 28 March, 2025;
originally announced March 2025.
-
High-Precision Alignment Techniques for Realizing an Ultracompact Electromagnetic Calorimeters Using Oriented high-Z Scintillator Crystals
Authors:
Lorenzo Malagutti,
Alessia Selmi,
Laura Bandiera,
Vladimir Baryshevsky,
Luca Bomben,
Nicola Canale,
Stefano Carsib,
Mattia Ciliberti,
Davide De Salvadore,
Vincenzo Guidi,
Viktar Haurylavets,
Mikhail Korjik,
Giulia Lezzani,
Alexander Lobko,
Sofia Mangiacavalli,
Andrea Mazzolari,
Pietro Monti-Guarnieri,
Matthew Moulson,
Riccardo Negrelloa,
Gianfranco Paternò,
Leonardo Perna,
Christian Petroselli,
Michela Prest,
Marco Romagnoni,
Francesco Sgarbossa
, et al. (7 additional authors not shown)
Abstract:
Electromagnetic calorimeters used in high-energy physics and astrophysics rely heavily on high-Z inorganic scintillators, such as lead tungstate (PbWO4 or PWO). The crystalline structure and lattice orientation of inorganic scintillators are frequently underestimated in detector design, even though it is known that the crystalline lattice strongly modifies the features of the electromagnetic proce…
▽ More
Electromagnetic calorimeters used in high-energy physics and astrophysics rely heavily on high-Z inorganic scintillators, such as lead tungstate (PbWO4 or PWO). The crystalline structure and lattice orientation of inorganic scintillators are frequently underestimated in detector design, even though it is known that the crystalline lattice strongly modifies the features of the electromagnetic processes inside the crystal. A novel method has been developed for precisely bonding PWO crystals with aligned atomic planes within 100 μrad, exploiting X-ray diffraction (XRD) to accurately measure miscut angles. This method demonstrates the possibility to align a layer of crystals along the same crystallographic direction, opening a new technological path towards the development of next-generation electromagnetic calorimeters.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Coherent radiation in axially oriented industrial-grade tungsten crystals: A viable path for an innovative γ-rays and positron sources
Authors:
N. Canale,
M. Romagnoni,
A. Sytov,
F. Alharthi,
S. Bertelli,
S. Carsi,
I. Chaikovska,
R. Chehab,
D. De Salvador,
P. Fedeli,
V. Guidi,
V. Haurylavets,
G. Lezzani,
L. Malagutti,
S. Mangiacavalli,
A. Mazzolari,
P. Monti-Guarnieri,
R. Negrello,
G. Paternò,
L. Perna,
L. Bandiera
Abstract:
It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z c…
▽ More
It is known that the alignment of an high-energy e- beam with specific crystal directions leads to a significant increase of the coherent radiation emission. This enhancement can be exploited to create an intense photon source. An elective application is an innovative positron source design for future lepton colliders. Such scheme takes advantage of lattice coherent effects by employing a high-Z crystalline radiator, followed by an amorphous metallic converter, to generate positrons via a two-step electromagnetic process. Additional applications can be in neutron production through photo-transmutation and radionuclide generation via photo-nuclear reactions. In this work, we present experimental results obtained from beam tests at CERN's PS facility using commercial industrial-grade tungsten crystals. The obtained results demonstrate the robust performance of industrial-grade radiators, even with their inherent imperfections, suggesting that it is possible to simplify the supply process and it is not strictly necessary to rely on highly specialized research infrastructures.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
A Novel Tool for Advanced Analysis of Geant4 Simulations of Charged Particles Interactions in Oriented Crystals
Authors:
R. Negrello,
L. Bandiera,
N. Canale,
P. Fedeli,
V. Guidi,
V. V. Haurylavets,
A. Mazzolari,
G. Paternò,
M. Romagnoni,
V. V. Tikhomirov,
A. Sytov
Abstract:
We present a novel Python tool for the analysis of Geant4 simulations that enhances our understanding of coherent phenomena occurring during the interaction of charged particles with crystal planes. This tool compares the total energy of particles with the potential energy inside crystal channels, enabling a complete examination of coherent effects. By tracking the particle trajectory and classify…
▽ More
We present a novel Python tool for the analysis of Geant4 simulations that enhances our understanding of coherent phenomena occurring during the interaction of charged particles with crystal planes. This tool compares the total energy of particles with the potential energy inside crystal channels, enabling a complete examination of coherent effects. By tracking the particle trajectory and classifying the dynamics at each simulation step, it provides deeper insights into how different phenomena contribute to both radiation and particle deflection. This tool can be used to improve crystal-based extraction methods and the development of gamma-ray sources using crystals.
△ Less
Submitted 20 March, 2025;
originally announced March 2025.
-
Particle identification capability of a homogeneous calorimeter composed of oriented crystals
Authors:
Pietro Monti-Guarnieri,
Laura Bandiera,
Nicola Canale,
Stefano Carsi,
Davide De Salvador,
Vincenzo Guidi,
Viktar Haurylavets,
Giulia Lezzani,
Francesco Longo,
Lorenzo Malagutti,
Sofia Mangiacavalli,
Andrea Mazzolari,
Matthew Moulson,
Riccardo Negrello,
Gianfranco Paternò,
Leonardo Perna,
Christian Petroselli,
Michela Prest,
Marco Romagnoni,
Giosuè Saibene,
Alessia Selmi,
Francesco Sgarbossa,
Mattia Soldani,
Alexei Sytov,
Victor Tikhomirov
, et al. (1 additional authors not shown)
Abstract:
Recent studies have shown that the electromagnetic shower induced by a high-energy electron, positron or photon incident along the axis of an oriented crystal develops in a space more compact than the ordinary. On the other hand, the properties of the hadronic interactions are not affected by the lattice structure. This means that, inside an oriented crystal, the natural difference between the had…
▽ More
Recent studies have shown that the electromagnetic shower induced by a high-energy electron, positron or photon incident along the axis of an oriented crystal develops in a space more compact than the ordinary. On the other hand, the properties of the hadronic interactions are not affected by the lattice structure. This means that, inside an oriented crystal, the natural difference between the hadronic and the electromagnetic shower profile is strongly accentuated. Thus, a calorimeter composed of oriented crystals could be intrinsically capable of identifying more accurately the nature of the incident particles, with respect to a detector composed only of non-aligned crystals. Since no oriented calorimeter has ever been developed, this possibility remains largely unexplored and can be investigated only by mean of numerical simulations. In this work, we report the first quantitative evaluation of the particle identification capability of such a calorimeter, focusing on the case of neutron-gamma discrimination. We demonstrate through Geant4 simulations that the use of oriented crystals significantly improves the performance of a Random Forest classifier trained on the detector data. This work is a proof that oriented calorimeters could be a viable option for all the environments where particle identification must be performed with a very high accuracy, such as future high-intensity particle physics experiments and satellite-based gamma-ray telescopes.
△ Less
Submitted 17 October, 2024; v1 submitted 18 May, 2024;
originally announced May 2024.
-
Acceleration of electromagnetic shower development and enhancement of light yield in oriented scintillating crystals
Authors:
Mattia Soldani,
Pietro Monti-Guarnieri,
Alessia Selmi,
Nicola Argiolas,
Luca Bomben,
Claudia Brizzolari,
Nicola Canale,
Stefano Carsi,
Nikolaos Charitonidis,
Davide De Salvador,
Vincenzo Guidi,
Viktar Haurylavets,
Mikhail Korzhik,
Giulia Lezzani,
Alexander Lobko,
Lorenzo Malagutti,
Sofia Mangiacavalli,
Valerio Mascagna,
Andrea Mazzolari,
Vitaly Mechinsky,
Matthew Moulson,
Riccardo Negrello,
Gianfranco Paternò,
Leonardo Perna,
Christian Petroselli
, et al. (9 additional authors not shown)
Abstract:
We observed a substantial increase of the scintillation light output of lead tungstate (PbWO$_4$) at a small incidence angle with respect to two main lattice axes. This reflects the acceleration of electromagnetic shower development that occurs in the crystalline Strong Field. We measured the scintillation light generated by $120$-$\mathrm{GeV}$ electrons and $10$-$100$-$\mathrm{GeV}$ $γ$ rays on…
▽ More
We observed a substantial increase of the scintillation light output of lead tungstate (PbWO$_4$) at a small incidence angle with respect to two main lattice axes. This reflects the acceleration of electromagnetic shower development that occurs in the crystalline Strong Field. We measured the scintillation light generated by $120$-$\mathrm{GeV}$ electrons and $10$-$100$-$\mathrm{GeV}$ $γ$ rays on thick samples. This result deepens the knowledge of the shower development mechanisms in crystal scintillators and could pave the way to the development of innovative accelerator- and space-borne calorimeters.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Radiation in oriented crystals: Innovative application to future positron sources
Authors:
Mattia Soldani,
Fahad Alharthi,
Laura Bandiera,
Nicola Canale,
Gianluca Cavoto,
Iryna Chaikovska,
Robert Chehab,
Vincenzo Guidi,
Viktar Haurylavets,
Andrea Mazzolari,
Riccardo Negrello,
Gianfranco Paternò,
Marco Romagnoni,
Alexei Sytov,
Victor Tikhomirov
Abstract:
It has been known since decades that the alignment of a beam of high-energy electrons with particular crystal directions involves a significant increase of bremsstrahlung radiation emission. This enhancement lies at the conceptual foundation of innovative positron source schemes for future lepton colliders. In particular, the so-called hybrid scheme makes use of a heavy-metal radiator in crystalli…
▽ More
It has been known since decades that the alignment of a beam of high-energy electrons with particular crystal directions involves a significant increase of bremsstrahlung radiation emission. This enhancement lies at the conceptual foundation of innovative positron source schemes for future lepton colliders. In particular, the so-called hybrid scheme makes use of a heavy-metal radiator in crystalline form, which is then followed by an amorphous metallic converter for positron generation from electrons by means of a two-step electromagnetic process. This work presents the most recent simulation results obtained on the development of a hybrid positron source for the FCC-$ee$ from the standpoint of the features of both the crystalline radiator and the amorphous converter.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
Pilot bunch and co-magnetometry of polarized particles stored in a ring
Authors:
J. Slim,
F. Rathmann,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
N. N. Nikolaev,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) on…
▽ More
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
Spin decoherence and off-resonance behavior of radiofrequency-driven spin rotations in storage rings
Authors:
N. N. Nikolaev,
F. Rathmann,
J. Slim,
A. Andres,
V. Hejny,
A. Nass,
A. Kacharava,
P. Lenisa,
J. Pretz,
A. Saleev,
V. Shmakova,
H. Soltner,
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi,
L. Barion,
I. Bekman,
M. Beyß,
C. Böhme,
B. Breitkreutz,
N. Canale,
G. Ciullo,
S. Dymov,
N. -O. Fröhlich
, et al. (38 additional authors not shown)
Abstract:
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of…
▽ More
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.
△ Less
Submitted 16 September, 2023; v1 submitted 10 September, 2023;
originally announced September 2023.
-
First Search for Axion-Like Particles in a Storage Ring Using a Polarized Deuteron Beam
Authors:
Swathi Karanth,
Edward J. Stephenson,
Seung Pyo Chang,
Volker Hejny,
Jörg Pretz,
Yannis K. Semertzidis,
Andreas Wirzba,
Aleksandra Wrońska,
Falastine Abusaif,
A. Aksentev,
Benat Alberdi,
Anjali Aggarwal,
Achim Andres,
Luca Barion,
Ilja Bekman,
M. Beyss,
Christian Böhme,
B. Breitkreutz,
C. von Byern,
Nicola Canale,
Guiseppe Ciullo,
Sergey Dymov,
Nils-Oliver Fröhlich,
Ralf Gebel,
Kirill Grigoryev
, et al. (38 additional authors not shown)
Abstract:
Based on the notion that the local dark-matter field of axions or axion-like particles (ALPs) in our Galaxy induces oscillating couplings to the spins of nucleons and nuclei (via the electric dipole moment of the latter and/or the paramagnetic axion-wind effect), we establish the feasibility of a new method to search for ALPs in storage rings. Based on previous work that allows us to maintain the…
▽ More
Based on the notion that the local dark-matter field of axions or axion-like particles (ALPs) in our Galaxy induces oscillating couplings to the spins of nucleons and nuclei (via the electric dipole moment of the latter and/or the paramagnetic axion-wind effect), we establish the feasibility of a new method to search for ALPs in storage rings. Based on previous work that allows us to maintain the in-plane polarization of a stored deuteron beam for a few hundred seconds, we performed a first proof-of-principle experiment at the Cooler Synchrotron COSY to scan momenta near 970 MeV/c. This entailed a scan of the spin precession frequency. At resonance between the spin precession frequency of deuterons and the ALP-induced EDM oscillation frequency there will be an accumulation of the polarization component out of the ring plane. Since the axion frequency is unknown, the momentum of the beam and consequently the spin precession frequency were ramped to search for a vertical polarization change that would occur when the resonance is crossed. At COSY, four beam bunches with different polarization directions were used to make sure that no resonance was missed because of the unknown relative phase between the polarization precession and the axion/ALP field. A frequency window of 1.5-kHz width around the spin precession frequency of 121 kHz was scanned. We describe the experimental procedure and a test of the methodology with the help of a radiofrequency Wien filter located on the COSY ring. No ALP resonance was observed. As a consequence an upper limit of the oscillating EDM component of the deuteron as well as its axion coupling constants are provided.
△ Less
Submitted 27 April, 2023; v1 submitted 15 August, 2022;
originally announced August 2022.
-
A New Beam Polarimeter at COSY to Search for Electric Dipole Moments of Charged Particles
Authors:
F. Müller,
O. Javakhishvili,
D. Shergelashvili,
I. Keshelashvili,
D. Mchedlishvili,
F. Abusaif,
A. Aggarwal,
L. Barion,
S. Basile,
J. Böker,
N. Canale,
G. Ciullo,
S. Dymov,
O. Felden,
M. Gagoshidze,
R. Gebel,
N. Demary,
K. Grigoryev,
D. Grzonka,
T. Hahnraths,
V. Hejny,
A. Kacharava,
V. Kamerdzhiev,
S. Karanth,
A. Kulikov
, et al. (31 additional authors not shown)
Abstract:
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an ED…
▽ More
A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum Jülich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an EDM search. The search requires a polarimeter with high efficiency, large analyzing power, and stable operating characteristics. With typical beam momenta of about 1 GeV/c, the scattering of protons or deuterons from a carbon target into forward angles becomes a nearly optimal choice of an analyzing reaction. The polarimeter described here consists of 52 LYSO detector modules, arranged in 4 symmetric blocks (up, down, left, right) for energy determination behind plastic scintillators for particle identification via energy loss. The commissioning results of the current setup demonstrate that the polarimeter is ready to be employed in a first direct search for an EDM on the deuteron, which is planned at COSY in the next two years.
△ Less
Submitted 22 October, 2020;
originally announced October 2020.
-
Storage Ring to Search for Electric Dipole Moments of Charged Particles -- Feasibility Study
Authors:
F. Abusaif,
A. Aggarwal,
A. Aksentev,
B. Alberdi-Esuain,
A. Andres,
A. Atanasov,
L. Barion,
S. Basile,
M. Berz,
C. Böhme,
J. Böker,
J. Borburgh,
N. Canale,
C. Carli,
I. Ciepał,
G. Ciullo,
M. Contalbrigo,
J. -M. De Conto,
S. Dymov,
O. Felden,
M. Gaisser,
R. Gebel,
N. Giese,
J. Gooding,
K. Grigoryev
, et al. (76 additional authors not shown)
Abstract:
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisatio…
▽ More
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM.
The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.
△ Less
Submitted 25 June, 2021; v1 submitted 17 December, 2019;
originally announced December 2019.
-
A Cylindrical GEM Inner Tracker for the BESIII experiment at IHEP
Authors:
R. Farinelli,
M. Alexeev,
A. Amoroso,
F. Bianchi,
M. Bertani,
D. Bettoni,
N. Canale,
A. Calcaterra,
V. Carassiti,
S. Cerioni,
J. Chai,
S. Chiozzi,
G. Cibinetto,
A. Cotta Ramusino,
F. Cossio,
F. De Mori,
M. Destefanis,
T. Edisher,
F. Evangelisti,
L. Fava,
G. Felici,
E. Fioravanti,
I. Garzia,
M. Gatta,
M. Greco
, et al. (21 additional authors not shown)
Abstract:
The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of…
▽ More
The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector that collects data provided by the collision in the Beijing Electron Positron Collider II (BEPCII), hosted at the Institute of High Energy Physics of Beijing. Since the beginning of its operation, BESIII has collected the world largest sample of J/ψ and ψ(2s). Due to the increase of the luminosity up to its nominal value of 10^33 cm-2 s-1 and aging effect, the MDC decreases its efficiency in the first layers up to 35% with respect to the value in 2014. Since BESIII has to take data up to 2022 with the chance to continue up to 2027, the Italian collaboration proposed to replace the inner part of the MDC with three independent layers of Cylindrical triple-GEM (CGEM). The CGEM-IT project will deploy several new features and innovation with respect the other current GEM based detector: the μTPC and analog readout, with time and charge measurements will allow to reach the 130 μm spatial resolution in 1 T magnetic field requested by the BESIII collaboration. In this proceeding, an update of the status of the project will be presented, with a particular focus on the results with planar and cylindrical prototypes with test beams data. These results are beyond the state of the art for GEM technology in magnetic field.
△ Less
Submitted 2 July, 2018;
originally announced July 2018.
-
Test beam results of a Cylindrical GEM detector for the BESIII experiment
Authors:
G. Mezzadri,
M. Alexeev,
A. Amoroso,
R. Baldini Ferroli,
M. Bertani,
D. Bettoni,
F. Bianchi,
A. Calcaterra,
N. Canale,
M. Capodiferro,
V. Carassiti,
S. Cerioni,
JY. Chai,
S. Chiozzi,
G. Cibinetto,
F. Cossio,
A. Cotta Ramusino,
F. De Mori,
M. Destefanis,
J. Dong,
F. Evangelisti,
R. Farinelli,
L. Fava,
G. Felici,
E. Fioravanti
, et al. (28 additional authors not shown)
Abstract:
Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows t…
▽ More
Gas detector are very light instrument used in high energy physics to measure the particle properties: position and momentum. Through high electric field is possible to use the Gas Electron Multiplier (GEM) technology to detect the charged particles and to exploit their properties to construct a large area detector, such as the new IT for BESIII. The state of the art in the GEM production allows to create very large area GEM foils (up to 50x100 $\mathrm{cm}^2$) and thanks to the small thickness of these foils is it possible to shape it to the desired form: a Cylindrical Gas Electron Multiplier (CGEM) is then proposed. The innovative construction technique based on Rohacell, a PMI foam, will give solidity to cathode and anode with a very low impact on material budget. The entire detector is sustained by Permaglass rings glued at the edges. These rings are used to assembly the CGEM, together with a dedicated Vertical Insertion System and moreover they host the On-Detector electronic. The anode has been improved w.r.t. the state of the art through a jagged readout that minimize the inter-strip capacitance. The mechanical challenge of this detector requires a precision of the entire geometry within few hundreds of microns in the whole area. In this contribution an overview of the construction technique, the validation of this technique through the realization of a CGEM, and its first tests will be presented. These activities are performed within the framework of the BESIIICGEM Project (645664), funded by the European Commission in the action H2020-RISE-MSCA-2014.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
The new cylindrical GEM inner tracker of BESIII
Authors:
L. Lavezzi,
M. Alexeev,
A. Amoroso,
R. Baldini Ferroli,
M. Bertani,
D. Bettoni,
F. Bianchi,
A. Calcaterra,
N. Canale,
M. Capodiferro,
V. Carassiti,
S. Cerioni,
JY. Chai,
S. Chiozzi,
G. Cibinetto,
F. Cossio,
A. Cotta Ramusino,
F. De Mori,
M. Destefanis,
J. Dong,
F. Evangelisti,
R. Farinelli,
L. Fava,
G. Felici,
E. Fioravanti
, et al. (27 additional authors not shown)
Abstract:
The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a…
▽ More
The Cylindrical GEM-Inner Tracker (CGEM-IT) is the upgrade of the internal tracking system of the BESIII experiment. It consists of three layers of cylindrically-shaped triple GEMs, with important innovations with respect to the existing GEM detectors, in order to achieve the best performance with the lowest material budget. It will be the first cylindrical GEM running with analog readout inside a 1T magnetic field. The simultaneous measurement of both the deposited charge and the signal time will permit to use a combination of two algorithms to evaluate the spatial position of the charged tracks inside the CGEM-IT: the charge centroid and the micro time projection chamber modes. They are complementary and can cope with the asymmetry of the electron avalanche when running in magnetic field and with non-orthogonal incident tracks. To evaluate the behavior under different working settings, both planar chambers and the first cylindrical prototype have been tested during various test beams at CERN with 150 GeV/c muons and pions. This paper reports the results obtained with the two reconstruction methods and a comparison between the planar and cylindrical chambers.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
