Showing 1–50 of 123 results for author: Bortoletto, D

Future Circular Collider Feasibility Study Report: Volume 2, Accelerators, Technical Infrastructure and Safety

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, A. Abada , et al. (1439 additional authors not shown)

Abstract: In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory;… ▽ More In response to the 2020 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) Feasibility Study was launched as an international collaboration hosted by CERN. This report describes the FCC integrated programme, which consists of two stages: an electron-positron collider (FCC-ee) in the first phase, serving as a high-luminosity Higgs, top, and electroweak factory; followed by a proton-proton collider (FCC-hh) at the energy frontier in the second phase. FCC-ee is designed to operate at four key centre-of-mass energies: the Z pole, the WW production threshold, the ZH production peak, and the top/anti-top production threshold - delivering the highest possible luminosities to four experiments. Over 15 years of operation, FCC-ee will produce more than 6 trillion Z bosons, 200 million WW pairs, nearly 3 million Higgs bosons, and 2 million top anti-top pairs. Precise energy calibration at the Z pole and WW threshold will be achieved through frequent resonant depolarisation of pilot bunches. The sequence of operation modes remains flexible. FCC-hh will operate at a centre-of-mass energy of approximately 85 TeV - nearly an order of magnitude higher than the LHC - and is designed to deliver 5 to 10 times the integrated luminosity of the HL-LHC. Its mass reach for direct discovery extends to several tens of TeV. In addition to proton-proton collisions, FCC-hh is capable of supporting ion-ion, ion-proton, and lepton-hadron collision modes. This second volume of the Feasibility Study Report presents the complete design of the FCC-ee collider, its operation and staging strategy, the full-energy booster and injector complex, required accelerator technologies, safety concepts, and technical infrastructure. It also includes the design of the FCC-hh hadron collider, development of high-field magnets, hadron injector options, and key technical systems for FCC-hh. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 627 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0004

Future Circular Collider Feasibility Study Report: Volume 3, Civil Engineering, Implementation and Sustainability

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. I… ▽ More Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes development of the project scenario based on the 'avoid-reduce-compensate' iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain - including numerous urban, economic, social, and technical aspects - confirmed the project's technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a concise summary of the studies conducted to document the current state of the environment. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 357 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-ACC-2025-0003

Future Circular Collider Feasibility Study Report: Volume 1, Physics, Experiments, Detectors

Authors: M. Benedikt, F. Zimmermann, B. Auchmann, W. Bartmann, J. P. Burnet, C. Carli, A. Chancé, P. Craievich, M. Giovannozzi, C. Grojean, J. Gutleber, K. Hanke, A. Henriques, P. Janot, C. Lourenço, M. Mangano, T. Otto, J. Poole, S. Rajagopalan, T. Raubenheimer, E. Todesco, L. Ulrici, T. Watson, G. Wilkinson, P. Azzi , et al. (1439 additional authors not shown)

Abstract: Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model.… ▽ More Volume 1 of the FCC Feasibility Report presents an overview of the physics case, experimental programme, and detector concepts for the Future Circular Collider (FCC). This volume outlines how FCC would address some of the most profound open questions in particle physics, from precision studies of the Higgs and EW bosons and of the top quark, to the exploration of physics beyond the Standard Model. The report reviews the experimental opportunities offered by the staged implementation of FCC, beginning with an electron-positron collider (FCC-ee), operating at several centre-of-mass energies, followed by a hadron collider (FCC-hh). Benchmark examples are given of the expected physics performance, in terms of precision and sensitivity to new phenomena, of each collider stage. Detector requirements and conceptual designs for FCC-ee experiments are discussed, as are the specific demands that the physics programme imposes on the accelerator in the domains of the calibration of the collision energy, and the interface region between the accelerator and the detector. The report also highlights advances in detector, software and computing technologies, as well as the theoretical tools /reconstruction techniques that will enable the precision measurements and discovery potential of the FCC experimental programme. This volume reflects the outcome of a global collaborative effort involving hundreds of scientists and institutions, aided by a dedicated community-building coordination, and provides a targeted assessment of the scientific opportunities and experimental foundations of the FCC programme. △ Less

Submitted 25 April, 2025; originally announced May 2025.

Comments: 290 pages. Please address any comment or request to [email protected]

Report number: CERN-FCC-PHYS-2025-0002

A Prototype Atom Interferometer to Detect Dark Matter and Gravitational Waves

Authors: C. F. A. Baynham, R. Hobson, O. Buchmueller, D. Evans, L. Hawkins, L. Iannizzotto-Venezze, A. Josset, D. Lee, E. Pasatembou, B. E. Sauer, M. R. Tarbutt, T. Walker, O. Ennis, U. Chauhan, A. Brzakalik, S. Dey, S. Hedges, B. Stray, M. Langlois, K. Bongs, T. Hird, S. Lellouch, M. Holynski, B. Bostwick, J. Chen , et al. (67 additional authors not shown)

Abstract: The AION project has built a tabletop prototype of a single-photon long-baseline atom interferometer using the 87Sr clock transition - a type of quantum sensor designed to search for dark matter and gravitational waves. Our prototype detector operates at the Standard Quantum Limit (SQL), producing a signal with no unexpected noise beyond atom shot noise. Importantly, the detector remains at the SQ… ▽ More The AION project has built a tabletop prototype of a single-photon long-baseline atom interferometer using the 87Sr clock transition - a type of quantum sensor designed to search for dark matter and gravitational waves. Our prototype detector operates at the Standard Quantum Limit (SQL), producing a signal with no unexpected noise beyond atom shot noise. Importantly, the detector remains at the SQL even when additional laser phase noise is introduced, emulating conditions in a long-baseline detector such as AION or AEDGE where significant laser phase deviations will accumulate during long atom interrogation times. Our results mark a key milestone in extending atom interferometers to long baselines. Such interferometers can complement laser-interferometer gravitational wave detectors by accessing the mid-frequency gravitational wave band around 1 Hz, and can search for physics beyond the Standard Model. △ Less

Submitted 16 April, 2025; v1 submitted 12 April, 2025; originally announced April 2025.

Comments: V2: minor fixes of author list issues and references

Report number: AION-REPORT/2025-02

Study of MALTA2, a Depleted Monolithic Active Pixel Sensor, with grazing angles at CERN SPS 180 GeV/c hadron beam

Authors: L. Li, P. Allport, I. Asensi Tortajada, P. Behera, D. V. Berlea, D. Bortoletto, C. Buttar, V. Dao, G. Dash, L. Fasselt, L. Flores Sanz de Acedo, M. Gazi, L. Gonella, V. Gonzalez, G. Gustavino, S. Haberl, T. Inada, P. Jana, H. Pernegger, P. Riedler, W. Snoeys, C. A Solans Sanchez, M. van Rijnbach, M. Vazquez Nunez, A. Vijay , et al. (2 additional authors not shown)

Abstract: MALTA2 is a Depleted Monolithic Active Pixel Sensor designed to meet the challenging requirements of future collider experiments, in particularly extreme radiation tolerance and high hit rate. The sensor is fabricated in a modified Tower 180 nm CMOS imaging technology to mitigate performance degradation caused by 100 MRad of Total Ionising Dose and greater than 10^{15} 1 MeV n_{eq}/cm^2 of Non-Ion… ▽ More MALTA2 is a Depleted Monolithic Active Pixel Sensor designed to meet the challenging requirements of future collider experiments, in particularly extreme radiation tolerance and high hit rate. The sensor is fabricated in a modified Tower 180 nm CMOS imaging technology to mitigate performance degradation caused by 100 MRad of Total Ionising Dose and greater than 10^{15} 1 MeV n_{eq}/cm^2 of Non-Ionising Energy Loss. MALTA2 samples have been tested during the CERN SPS test beam campaign in 2023-2024, before and after irradiation at a fluence of 1 $\times$ 10^{15} 1 MeV n_{eq}/cm^2. The sensors were positioned at various inclinations relative to the beam, covering grazing angles from 0 to 60 degrees. This contribution presents measurements of detection efficiency and cluster size as functions of these angles, along with an estimation of the active depth of the depleted region based on the test beam results. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Comments: 5 pages, 3 figures, 11th PIXEL International Workshop on Semiconductor Pixel Detectors for Particles and Imaging

Timing characterization of MALTA and MALTA2 pixel detectors using Micro X-ray source

Authors: G. Dash, P. Allport, I. Asensi Tortajada, P. Behera, D. V. Berlea, D. Bortoletto, C. Buttar, V. Dao, L. Fasselt, L. Flores Sanz de Acedo, M. Gazi, L. Gonella, V. Gonzalez, G. Gustavino, S. Haberl, T. Inada, P. Jana, L. Li, H. Pernegger, P. Riedler, W. Snoeys, C. A Solans Sanchez, M. van Rijnbach, M. Vazquez Nunez, A. Vijay , et al. (2 additional authors not shown)

Abstract: The MALTA monolithic active pixel detector is developed to address the challenges anticipated in future high-energy physics detectors. As part of its characterization, we conducted fast-timing studies necessary to provide a figure of merit for this family of monolithic pixel detectors. MALTA has a metal layer in front-end electronics, and the conventional laser technique is not suitable for fast t… ▽ More The MALTA monolithic active pixel detector is developed to address the challenges anticipated in future high-energy physics detectors. As part of its characterization, we conducted fast-timing studies necessary to provide a figure of merit for this family of monolithic pixel detectors. MALTA has a metal layer in front-end electronics, and the conventional laser technique is not suitable for fast timing studies due to the reflection of the laser from the metallic surface. X-rays have been employed as a more effective alternative for penetration through these layers. The triggered X-ray set-up is designed to study timing measurements of monolithic detectors. The timing response of the X-ray set-up is characterized using an LGAD. The timing response of the MALTA and MALTA2 pixel detectors is studied, and the best response time of MALTA2 pixel detectors is measured at about 2 ns. △ Less

Submitted 18 February, 2025; originally announced February 2025.

Comments: 13 pages, 11 figures, To be submitted to JINST

ACM Class: J.2

Charge calibration of MALTA2, a radiation hard depleted monolithic active pixel sensor

Authors: Lucian Fasselt, Ignacio Asensi Tortajada, Prafulla Behera, Dumitru Vlad Berlea, Daniela Bortoletto, Craig Buttar, Valerio Dao, Ganapati Dash, Leyre Flores Sanz de Acedo, Martin Gazi, Laura Gonella, Vicente González, Sebastian Haberl, Tomohiro Inada, Pranati Jana, Long Li, Heinz Pernegger, Petra Riedler, Walter Snoeys, Carlos Solans Sánchez, Milou van Rijnbach, Marcos Vázquez Núñez, Anusree Vijay, Julian Weick, Steven Worm

Abstract: MALTA2 is a depleted monolithic active pixel sensor (DMAPS) designed for tracking at high rates and typically low detection threshold of $\sim150\,\mathrm{e^-}$. A precise knowledge of the threshold is crucial to understanding the charge collection in the pixel and specifying the environment for sensor application. A simple procedure is developed to calibrate the threshold to unit electrons making… ▽ More MALTA2 is a depleted monolithic active pixel sensor (DMAPS) designed for tracking at high rates and typically low detection threshold of $\sim150\,\mathrm{e^-}$. A precise knowledge of the threshold is crucial to understanding the charge collection in the pixel and specifying the environment for sensor application. A simple procedure is developed to calibrate the threshold to unit electrons making use of a dedicated charge injection circuit and an Fe-55 source with dominant charge deposition of $1600\, \mathrm{e^-}$. The injection voltage is determined which corresponds to the injection under Fe-55 exposure and is the basis for charge calibration. The charge injection circuit incorporates a capacitance with design value of $\mathrm{C_{inj}}=$ 230 aF. Experimentally, the average capacitance value for non-irradiated samples is found to be $\mathrm{C_{inj,exp}}=$ 257 aF. The 12 % divergence motivates the need for the presented precise calibration procedure, which is proposed to be performed for each MALTA2 sensor. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Terrestrial Very-Long-Baseline Atom Interferometry: Summary of the Second Workshop

Authors: Adam Abdalla, Mahiro Abe, Sven Abend, Mouine Abidi, Monika Aidelsburger, Ashkan Alibabaei, Baptiste Allard, John Antoniadis, Gianluigi Arduini, Nadja Augst, Philippos Balamatsias, Antun Balaz, Hannah Banks, Rachel L. Barcklay, Michele Barone, Michele Barsanti, Mark G. Bason, Angelo Bassi, Jean-Baptiste Bayle, Charles F. A. Baynham, Quentin Beaufils, Slyan Beldjoudi, Aleksandar Belic, Shayne Bennetts, Jose Bernabeu , et al. (285 additional authors not shown)

Abstract: This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry commun… ▽ More This summary of the second Terrestrial Very-Long-Baseline Atom Interferometry (TVLBAI) Workshop provides a comprehensive overview of our meeting held in London in April 2024, building on the initial discussions during the inaugural workshop held at CERN in March 2023. Like the summary of the first workshop, this document records a critical milestone for the international atom interferometry community. It documents our concerted efforts to evaluate progress, address emerging challenges, and refine strategic directions for future large-scale atom interferometry projects. Our commitment to collaboration is manifested by the integration of diverse expertise and the coordination of international resources, all aimed at advancing the frontiers of atom interferometry physics and technology, as set out in a Memorandum of Understanding signed by over 50 institutions. △ Less

Submitted 19 December, 2024; originally announced December 2024.

Comments: Summary of the second Terrestrial Very-Long-Baseline Atom Interferometry Workshop held at Imperial College London: https://indico.cern.ch/event/1369392/

Measuring the ATLAS ITk Pixel Detector Material via Multiple Scattering of Positrons at the CERN PS

Authors: Simon Florian Koch, Brian Moser, Antonín Lindner, Valerio Dao, Ignacio Asensi, Daniela Bortoletto, Marianne Brekkum, Florian Dachs, Hans Ludwig Joos, Milou van Rijnbach, Abhishek Sharma, Ismet Siral, Carlos Solans, Yingjie Wei

Abstract: The ITk is a new silicon tracker for the ATLAS experiment designed to increase detector resolution, readout capacity, and radiation hardness, in preparation for the larger number of simultaneous proton-proton interactions at the High Luminosity LHC. This paper presents the first direct measurement of the material budget of an ATLAS ITk pixel module, performed at a testbeam at the CERN Proton Synch… ▽ More The ITk is a new silicon tracker for the ATLAS experiment designed to increase detector resolution, readout capacity, and radiation hardness, in preparation for the larger number of simultaneous proton-proton interactions at the High Luminosity LHC. This paper presents the first direct measurement of the material budget of an ATLAS ITk pixel module, performed at a testbeam at the CERN Proton Synchrotron via the multiple scattering of low energy positrons within the module volume. Using a four plane telescope of thin monolithic pixel detectors from the MALTA collaboration, scattering datasets were recorded at a beam energy of $1.2\,\text{GeV}$. Kink angle distributions were extracted from tracks derived with and without information from the ITk pixel module, and were fit to extract the RMS scattering angle, which was converted to a fractional radiation length $x/X_0$. The average $x/X_0$ across the module was measured as $[0.89 \pm 0.01 \text{ (resolution)} \pm 0.01 \text{ (subtraction)} \pm 0.08 \text{ (beam momentum band)}]\%$, which agrees within uncertainties with an estimate of $0.88\%$ derived from material component expectations. △ Less

Submitted 5 December, 2024; originally announced December 2024.

Comments: 12 pages, 12 figures

Journal ref: Eur. Phys. J. C 85, 381 (2025)

Radiation Hardness of MALTA2 Monolithic CMOS Sensors on Czochralski Substrates

Authors: Milou van Rijnbach, Dumitru Vlad Berlea, Valerio Dao, Martin Gaži, Phil Allport, Ignacio Asensi Tortajada, Prafulla Behera, Daniela Bortoletto, Craig Buttar, Florian Dachs, Ganapati Dash, Dominik Dobrijević, Lucian Fasselt, Leyre Flores Sanz de Acedo, Andrea Gabrielli, Vicente González, Giuliano Gustavino, Pranati Jana, Heinz Pernegger, Petra Riedler, Heidi Sandaker, Carlos Solans Sánchez, Walter Snoeys, Tomislav Suligoj, Marcos Vázquez Núñez , et al. (4 additional authors not shown)

Abstract: MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) no… ▽ More MALTA2 is the latest full-scale prototype of the MALTA family of Depleted Monolithic Active Pixel Sensors (DMAPS) produced in Tower Semiconductor 180 nm CMOS technology. In order to comply with the requirements of High Energy Physics (HEP) experiments, various process modifications and front-end changes have been implemented to achieve low power consumption, reduce Random Telegraph Signal (RTS) noise, and optimise the charge collection geometry. Compared to its predecessors, MALTA2 targets the use of a high-resistivity, thick Czochralski (Cz) substrates in order to demonstrate radiation hardness in terms of detection efficiency and timing resolution up to 3E15 1 MeV neq/cm2 with backside metallisation to achieve good propagation of the bias voltage. This manuscript shows the results that were obtained with non-irradiated and irradiated MALTA2 samples on Cz substrates from the CERN SPS test beam campaign from 2021-2023 using the MALTA telescope. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Centralised Design and Production of the Ultra-High Vacuum and Laser-Stabilisation Systems for the AION Ultra-Cold Strontium Laboratories

Authors: B. Stray, O. Ennis, S. Hedges, S. Dey, M. Langlois, K. Bongs, S. Lellouch, M. Holynski, B. Bostwick, J. Chen, Z. Eyler, V. Gibson, T. L. Harte, M. Hsu, M. Karzazi, J. Mitchell, N. Mouelle, U. Schneider, Y. Tang, K. Tkalcec, Y. Zhi, K. Clarke, A. Vick, K. Bridges, J. Coleman , et al. (47 additional authors not shown)

Abstract: This paper outlines the centralised design and production of the Ultra-High-Vacuum sidearm and Laser-Stabilisation systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilisation, and on the loading rate for the 3D Magneto-Optical Trap are presented. Streamlining the… ▽ More This paper outlines the centralised design and production of the Ultra-High-Vacuum sidearm and Laser-Stabilisation systems for the AION Ultra-Cold Strontium Laboratories. Commissioning data on the residual gas and steady-state pressures in the sidearm chambers, on magnetic field quality, on laser stabilisation, and on the loading rate for the 3D Magneto-Optical Trap are presented. Streamlining the design and production of the sidearm and laser stabilisation systems enabled the AION Collaboration to build and equip in parallel five state-of-the-art Ultra-Cold Strontium Laboratories within 24 months by leveraging key expertise in the collaboration. This approach could serve as a model for the development and construction of other cold atom experiments, such as atomic clock experiments and neutral atom quantum computing systems, by establishing dedicated design and production units at national laboratories. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 27 pages, 21 figures

Report number: AION-REPORT/2023-03

Performance of the MALTA Telescope

Authors: Milou van Rijnbach, Giuliano Gustavino, Phil Allport, Igancio Asensi, Dumitru Vlad Berlea, Daniela Bortoletto, Craig Buttar, Edoardo Charbon, Florian Dachs, Valerio Dao, Dominik Dobrijevic, Leyre Flores Sanz de Acedo, Andrea Gabrielli, Martin Gazi, Laura Gonella, Vicente Gonzalez, Stefan Guindon, Matt LeBlanc, Heinz Pernegger, Francesco Piro, Petra Riedler, Heidi Sandaker, Abhishek Sharma, Carlos Solans Sanchez, Walter Snoeys , et al. (5 additional authors not shown)

Abstract: MALTA is part of the Depleted Monolithic Active Pixel sensors designed in Tower 180nm CMOS imaging technology. A custom telescope with six MALTA planes has been developed for test beam campaigns at SPS, CERN, with the ability to host several devices under test. The telescope system has a dedicated custom readout, online monitoring integrated into DAQ with realtime hit map, time distribution and ev… ▽ More MALTA is part of the Depleted Monolithic Active Pixel sensors designed in Tower 180nm CMOS imaging technology. A custom telescope with six MALTA planes has been developed for test beam campaigns at SPS, CERN, with the ability to host several devices under test. The telescope system has a dedicated custom readout, online monitoring integrated into DAQ with realtime hit map, time distribution and event hit multiplicity. It hosts a dedicated fully configurable trigger system enabling to trigger on coincidence between telescope planes and timing reference from a scintillator. The excellent time resolution performance allows for fast track reconstruction, due to the possibility to retain a low hit multiplicity per event which reduces the combinatorics. This paper reviews the architecture of the system and its performance during the 2021 and 2022 test beam campaign at the SPS North Area. △ Less

Submitted 21 April, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

Timing performance of radiation hard MALTA monolithic Pixel sensors

Authors: G. Gustavino, P. Allport, I. Asensi, D. V. Berlea, D. Bortoletto, C. Buttar, F. Dachs, V. Dao, H. Denizli, D. Dobrijevic, L. Flores, A. Gabrielli, L. Gonella, V. González, M. LeBlanc, K. Oyulmaz, H. Pernegger, F. Piro, P. Riedler, H. Sandaker, C. Solans, W. Snoeys, T. Suligoj, M. van Rijnbach, A. Sharma , et al. (4 additional authors not shown)

Abstract: The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficien… ▽ More The MALTA family of Depleted Monolithic Active Pixel Sensor (DMAPS) produced in Tower 180 nm CMOS technology targets radiation hard applications for the HL-LHC and beyond. Several process modifications and front-end improvements have resulted in radiation hardness up to $2 \times 10^{15}~1~\text{MeV}~\text{n}_{eq}/\text{cm}^2$ and time resolution below 2 ns, with uniform charge collection efficiency across the Pixel of size $36.4 \times 36.4~μ\text{m}^2$ with a $3~μ\text{m}^2$ electrode size. The MALTA2 demonstrator produced in 2021 on high-resistivity epitaxial silicon and on Czochralski substrates implements a new cascoded front-end that reduces the RTS noise and has a higher gain. This contribution shows results from MALTA2 on timing resolution at the nanosecond level from the CERN SPS test-beam campaign of 2021. △ Less

Submitted 31 January, 2023; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: 8 pages, 8 figures. Submitted to Journal of Instrumentation (JINST). Proceedings of the 23rd International Workshop on Radiation Imaging Detectors IWORID 2022

Recent results with radiation-tolerant TowerJazz 180 nm MALTA Sensors

Authors: Matt LeBlanc, Phil Allport, Igancio Asensi, Dumitru-Vlad Berlea, Daniela Bortoletto, Craig Buttar, Florian Dachs, Valerio Dao, Haluk Denizli, Dominik Dobrijevic, Leyre Flores, Andrea Gabrielli, Laura Gonella, Vicente González, Giuliano Gustavino, Kaan Oyulmaz, Heinz Pernegger, Francesco Piro, Petra Riedler, Heidi Sandaker, Carlos Solans, Walter Snoeys, Tomislav Suligoj, Milou van Rijnbach, Abhishek Sharma , et al. (4 additional authors not shown)

Abstract: To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 n… ▽ More To achieve the physics goals of future colliders, it is necessary to develop novel, radiation-hard silicon sensors for their tracking detectors. We target the replacement of hybrid pixel detectors with Depleted Monolithic Active Pixel Sensors (DMAPS) that are radiation-hard, monolithic CMOS sensors. We have designed, manufactured and tested the MALTA series of sensors, which are DMAPS in the 180 nm TowerJazz CMOS imaging technology. MALTA have a pixel pitch well below current hybrid pixel detectors, high time resolution (< 2 ns) and excellent charge collection efficiency across pixel geometries. These sensors have a total silicon thickness of between 50-300 $μ$m, implying reduced material budgets and multiple scattering rates for future detectors which utilize such technology. Furthermore, their monolithic design bypasses the costly stage of bump-bonding in hybrid sensors and can substantially reduce detector costs. This contribution presents the latest results from characterization studies of the MALTA2 sensors, including results demonstrating the radiation tolerance of these sensors. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Comments: 4 pages, 4 figures. Accepted by Nuclear Inst. and Methods in Physics Research, A (Proceedings of VCI 2022)

A novel measurement of initial-state gluon radiation in hadron collisions using Drell-Yan events

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (375 additional authors not shown)

Abstract: A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In… ▽ More A study of initial-state gluon radiation (ISR) in hadron collisions is presented using Drell-Yan (DY) events produced in proton-antiproton collisions by the Tevatron collider at a center-of-mass energy of 1.96 TeV. This paper adopts a novel approach which uses the mean value of the Z/$γ^*$ transverse momentum $<p_T^{DY}>$ in DY events as a powerful observable to characterize the effect of ISR. In a data sample corresponding to an integrated luminosity of 9.4 fb$^{-1}$ collected with the CDF Run II detector, $<p_T^{DY}>$ is measured as a function of the Z/$γ^*$ invariant mass. It is found that these two observables have a dependence, $<p_T^{DY}> = -8 + 2.2 \ln m_{DY}^2$ [GeV/c], where $m_{DY}$ is the value of the Z/$γ^*$ mass measured in units of GeV/$c^2$. This linear dependence is observed for the first time in this analysis. It may be exploited to model the effect of ISR and constrain its impact in other processes. △ Less

Submitted 28 October, 2021; v1 submitted 28 October, 2021; originally announced October 2021.

Comments: 14 pages, 14 figures

Measurement of the charge asymmetry of electrons from the decays of $W$ bosons produced in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (376 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton mome… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, high-mass electron-neutrino ($eν$) pairs are produced predominantly in the process $p \bar{p} \rightarrow W(\rightarrow eν) + X$. The asymmetry of the electron and positron yield as a function of their pseudorapidity constrain the slope of the ratio of the $u$- to $d$-quark parton distributions versus the fraction of the proton momentum carried by the quarks. This paper reports on the measurement of the electron-charge asymmetry using the full data set recorded by the Collider Detector at Fermilab in 2001--2011 and corresponding to 9.1~fb$^{-1}$ of integrated luminosity. The measurement significantly improves the precision of the Tevatron constraints on the parton-distribution functions of the proton. Numerical tables of the measurement are provided. △ Less

Submitted 2 November, 2021; v1 submitted 9 July, 2021; originally announced July 2021.

Comments: 27 pages, 25 figures. To be published in PRD

Report number: FERMILAB-PUB-21-293-E

Advances in Multi-Variate Analysis Methods for New Physics Searches at the Large Hadron Collider

Authors: Anna Stakia, Tommaso Dorigo, Giovanni Banelli, Daniela Bortoletto, Alessandro Casa, Pablo de Castro, Christophe Delaere, Julien Donini, Livio Finos, Michele Gallinaro, Andrea Giammanco, Alexander Held, Fabricio Jiménez Morales, Grzegorz Kotkowski, Seng Pei Liew, Fabio Maltoni, Giovanna Menardi, Ioanna Papavergou, Alessia Saggio, Bruno Scarpa, Giles C. Strong, Cecilia Tosciri, João Varela, Pietro Vischia, Andreas Weiler

Abstract: Between the years 2015 and 2019, members of the Horizon 2020-funded Innovative Training Network named "AMVA4NewPhysics" studied the customization and application of advanced multivariate analysis methods and statistical learning tools to high-energy physics problems, as well as developed entirely new ones. Many of those methods were successfully used to improve the sensitivity of data analyses per… ▽ More Between the years 2015 and 2019, members of the Horizon 2020-funded Innovative Training Network named "AMVA4NewPhysics" studied the customization and application of advanced multivariate analysis methods and statistical learning tools to high-energy physics problems, as well as developed entirely new ones. Many of those methods were successfully used to improve the sensitivity of data analyses performed by the ATLAS and CMS experiments at the CERN Large Hadron Collider; several others, still in the testing phase, promise to further improve the precision of measurements of fundamental physics parameters and the reach of searches for new phenomena. In this paper, the most relevant new tools, among those studied and developed, are presented along with the evaluation of their performances. △ Less

Submitted 22 November, 2021; v1 submitted 16 May, 2021; originally announced May 2021.

Comments: 101 pages, 21 figures, submitted to Elsevier. [v2]: Updated to published version (in 'Reviews in Physics')

Journal ref: Rev. Phys. 7 (2021) 100063

Technical design of the phase I Mu3e experiment

Authors: K. Arndt, H. Augustin, P. Baesso, N. Berger, F. Berg, C. Betancourt, D. Bortoletto, A. Bravar, K. Briggl, D. vom Bruch, A. Buonaura, F. Cadoux, C. Chavez Barajas, H. Chen, K. Clark, P. Cooke, S. Corrodi, A. Damyanova, Y. Demets, S. Dittmeier, P. Eckert, F. Ehrler, D. Fahrni, S. Gagneur, L. Gerritzen , et al. (80 additional authors not shown)

Abstract: The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the p… ▽ More The Mu3e experiment aims to find or exclude the lepton flavour violating decay $μ\rightarrow eee$ at branching fractions above $10^{-16}$. A first phase of the experiment using an existing beamline at the Paul Scherrer Institute (PSI) is designed to reach a single event sensitivity of $2\cdot 10^{-15}$. We present an overview of all aspects of the technical design and expected performance of the phase~I Mu3e detector. The high rate of up to $10^{8}$ muon decays per second and the low momenta of the decay electrons and positrons pose a unique set of challenges, which we tackle using an ultra thin tracking detector based on high-voltage monolithic active pixel sensors combined with scintillating fibres and tiles for precise timing measurements. △ Less

Submitted 26 August, 2021; v1 submitted 24 September, 2020; originally announced September 2020.

Comments: 117 pages. Minor corrections to the author list. Replaced with published version. Editor: Frank Meier Aeschbacher

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Vol. 1014 (2021) 165679

Higgs self-coupling measurements using deep learning in the $b\bar{b}b\bar{b}$ final state

Authors: Jacob Amacker, William Balunas, Lydia Beresford, Daniela Bortoletto, James Frost, Cigdem Issever, Jesse Liu, James McKee, Alessandro Micheli, Santiago Paredes Saenz, Michael Spannowsky, Beojan Stanislaus

Abstract: Measuring the Higgs trilinear self-coupling $λ_{hhh}$ is experimentally demanding but fundamental for understanding the shape of the Higgs potential. We present a comprehensive analysis strategy for the HL-LHC using di-Higgs events in the four $b$-quark channel ($hh \to 4b$), extending current methods in several directions. We perform deep learning to suppress the formidable multijet background wi… ▽ More Measuring the Higgs trilinear self-coupling $λ_{hhh}$ is experimentally demanding but fundamental for understanding the shape of the Higgs potential. We present a comprehensive analysis strategy for the HL-LHC using di-Higgs events in the four $b$-quark channel ($hh \to 4b$), extending current methods in several directions. We perform deep learning to suppress the formidable multijet background with dedicated optimisation for BSM $λ_{hhh}$ scenarios. We compare the $λ_{hhh}$ constraining power of events using different multiplicities of large radius jets with a two-prong structure that reconstruct boosted $h \to bb$ decays. We show that current uncertainties in the SM top Yukawa coupling $y_t$ can modify $λ_{hhh}$ constraints by $\sim 20\%$. For SM $y_t$, we find prospects of $-0.8 < λ_{hhh} / λ_{hhh}^\text{SM} < 6.6$ at 68% CL under simplified assumptions for 3000~fb$^{-1}$ of HL-LHC data. Our results provide a careful assessment of di-Higgs identification and machine learning techniques for all-hadronic measurements of the Higgs self-coupling and sharpens the requirements for future improvement. △ Less

Submitted 12 October, 2020; v1 submitted 8 April, 2020; originally announced April 2020.

Comments: 36 pages, 15 figures + bibliography and appendices

Report number: IPPP/20/11

Journal ref: JHEP 12 (2020) 115

AION: An Atom Interferometer Observatory and Network

Authors: L. Badurina, E. Bentine, D. Blas, K. Bongs, D. Bortoletto, T. Bowcock, K. Bridges, W. Bowden, O. Buchmueller, C. Burrage, J. Coleman, G. Elertas, J. Ellis, C. Foot, V. Gibson, M. G. Haehnelt, T. Harte, S. Hedges, R. Hobson, M. Holynski, T. Jones, M. Langlois, S. Lellouch, M. Lewicki, R. Maiolino , et al. (16 additional authors not shown)

Abstract: We outline the experimental concept and key scientific capabilities of AION (Atom Interferometer Observatory and Network), a proposed UK-based experimental programme using cold strontium atoms to search for ultra-light dark matter, to explore gravitational waves in the mid-frequency range between the peak sensitivities of the LISA and LIGO/Virgo/ KAGRA/INDIGO/Einstein Telescope/Cosmic Explorer exp… ▽ More We outline the experimental concept and key scientific capabilities of AION (Atom Interferometer Observatory and Network), a proposed UK-based experimental programme using cold strontium atoms to search for ultra-light dark matter, to explore gravitational waves in the mid-frequency range between the peak sensitivities of the LISA and LIGO/Virgo/ KAGRA/INDIGO/Einstein Telescope/Cosmic Explorer experiments, and to probe other frontiers in fundamental physics. AION would complement other planned searches for dark matter, as well as probe mergers involving intermediate mass black holes and explore early universe cosmology. AION would share many technical features with the MAGIS experimental programme in the US, and synergies would flow from operating AION in a network with this experiment, as well as with other atom interferometer experiments such as MIGA, ZAIGA and ELGAR. Operating AION in a network with other gravitational wave detectors such as LIGO, Virgo and LISA would also offer many synergies. △ Less

Submitted 8 May, 2020; v1 submitted 26 November, 2019; originally announced November 2019.

Comments: v3: Update to match published version in JCAP

Report number: AION-2019-001

Mini-MALTA: Radiation hard pixel designs for small-electrode monolithic CMOS sensors for the High Luminosity LHC

Authors: M. Dyndal, V. Dao, P. Allport, I. Asensi Tortajada, M. Barbero, S. Bhat, D. Bortoletto, I. Berdalovic, C. Bespin, C. Buttar, I. Caicedo, R. Cardella, F. Dachs, Y. Degerli, H. Denizli, L. Flores Sanz de Acedo, P. Freeman, L. Gonella, A. Habib, T. Hemperek, T. Hirono, B. Hiti, T. Kugathasan, I. Mandić, D. Maneuski , et al. (19 additional authors not shown)

Abstract: Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silico… ▽ More Depleted Monolithic Active Pixel Sensor (DMAPS) prototypes developed in the TowerJazz 180 nm CMOS imaging process have been designed in the context of the ATLAS upgrade Phase-II at the HL-LHC. The pixel sensors are characterized by a small collection electrode (3 $μ$m) to minimize capacitance, a small pixel size ($36.4\times 36.4$ $μ$m), and are produced on high resistivity epitaxial p-type silicon. The design targets a radiation hardness of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$, compatible with the outermost layer of the ATLAS ITK Pixel detector. This paper presents the results from characterization in particle beam tests of the Mini-MALTA prototype that implements a mask change or an additional implant to address the inefficiencies on the pixel edges. Results show full efficiency after a dose of $1\times10^{15}$ 1 MeV n$_{eq}$/cm$^{2}$. △ Less

Submitted 14 December, 2019; v1 submitted 26 September, 2019; originally announced September 2019.

Search for Higgs-like particles produced in association with bottom quarks in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified… ▽ More We report on a search for a spin-zero non-standard-model particle in proton-antiproton collisions collected by the Collider Detector at Fermilab at a center-of-mass-energy of 1.96 TeV. This particle, the $φ$ boson, is expected to decay into a bottom-antibottom quark pair and to be produced in association with at least one bottom quark. The data sample consists of events with three jets identified as initiated by bottom quarks and corresponds to $5.4~\text{fb}^{-1}$ of integrated luminosity. In each event, the invariant mass of the two most energetic jets is studied by looking for deviations from the multijet background, which is modeled using data. No evidence is found for such particle. Exclusion upper limits ranging from 20 to 2 pb are set for the product of production cross sections times branching fraction for hypothetical $φ$ boson with mass between 100 and 300 GeV/$c^2$. These are the most stringent constraints to date. △ Less

Submitted 12 February, 2019; originally announced February 2019.

Comments: submitted to PRD

Report number: FERMILAB-PUB-19-067-PPD

Journal ref: Phys. Rev. D 99, 052001 (2019)

Measurement of the differential cross sections for $W$-boson production in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron… ▽ More This paper presents a study of the production of a single $W$ boson in association with one or more jets in proton-antiproton collisions at $\sqrt{s}=1.96$ TeV, using the entire data set collected in 2001-2011 by the Collider Detector at Fermilab at the Tevatron, which corresponds to an integrated luminosity of $9.0$ fb$^{-1}$. The $W$ boson is identified through its leptonic decays into electron and muon. The production cross sections are measured for each leptonic decay mode and combined after testing that the ratio of the $W(\rightarrow μν)+$jets cross section to the $W(\rightarrow eν)+$jets cross section agrees with the hypothesis of $e$-$μ$ lepton universality. The combination of measured cross sections, differential in the inclusive jet multiplicity ($W+\geqslant N$ jets with $N=1,\,2,\,3, \textrm{or }4$) and in the transverse energy of the leading jet, are compared with theoretical predictions. △ Less

Submitted 7 August, 2018; originally announced August 2018.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-18-371-E

Journal ref: Phys. Rev. D 98, 112005 (2018)

Search for standard-model Z and Higgs bosons decaying into a bottom-antibottom quark pair in proton-antiproton collisions at 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an… ▽ More The Collider Detector at Fermilab collected a unique sample of jets originating from bottom-quark fragmentation ($b$-jets) by selecting online proton-antiproton ($p\bar{p}$) collisions with a vertex displaced from the $p\bar{p}$ interaction point, consistent with the decay of a bottom-quark hadron. This data set, collected at a center-of-mass energy of $\sqrt{s}=$1.96 TeV, and corresponding to an integrated luminosity of $5.4~\rm{fb}^{-1}$, is used to measure the $Z$-boson production cross section times branching ratio into $b\bar{b}$. The number of $Z\rightarrow b\bar{b}$ events is determined by fitting the dijet-mass distribution while constraining the dominant $b$-jet background, originating from QCD multijet events, with data. The result, $σ(p\bar{p} \rightarrow Z) \times \mathcal{B}(Z \rightarrow b\bar{b})= 1.11\pm 0.08(\text{stat}) \pm 0.14(\text{syst})~\text{nb}$, is the most precise measurement of this process, and is consistent with the standard-model prediction. The data set is also used to search for Higgs-boson production. No significant signal is expected in our data and the first upper limit on the cross section for the inclusive $p\bar p \rightarrow H\rightarrow b\bar b$ process at $\sqrt{s}=$1.96 TeV is set, corresponding to 33 times the expected standard-model cross section, or $σ= 40.6$ pb, at the 95\% confidence level. △ Less

Submitted 18 October, 2018; v1 submitted 3 July, 2018; originally announced July 2018.

Report number: FERMILAB-PUB-18-307-E-PPD

Journal ref: Phys. Rev. D 98, 072002 (2018)

A search for the exotic meson $X(5568)$ with the Collider Detector at Fermilab

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the… ▽ More A search for the exotic meson $X(5568)$ decaying into the $B^0_s π^{\pm}$ final state is performed using data corresponding to $9.6 \textrm{fb}^{-1}$ from $p{\bar p}$ collisions at $\sqrt{s} = 1960$ GeV recorded by the Collider Detector at Fermilab. No evidence for this state is found and an upper limit of 6.7\% at the 95\% confidence level is set on the fraction of $B^0_s$ produced through the $X(5568) \rightarrow B^0_s \, π^{\pm}$ process. △ Less

Submitted 27 December, 2017; originally announced December 2017.

Comments: 13 pages, 3 figures

Report number: FERMILAB-FN-1048-E

Journal ref: Phys. Rev. Lett. 120, 202006 (2018)

Study of prototypes of LFoundry active and monolithic CMOS pixels sensors for the ATLAS detector

Authors: L. Vigani, D. Bortoletto, L. Ambroz, R. Plackett, T. Hemperek, P. Rymaszewski, T. Wang, H. Krueger, T. Hirono, I. Caicedo Sierra, N. Wermes, M. Barbero, S. Bhat, P. Breugnon, Z. Chen, S. Godiot, P. Pangaud, A. Rozanov

Abstract: High Energy Particle Physics experiments at the LHC use hybrid silicon detectors, in both pixel and strip geometry, for their inner trackers. These detectors have proven to be very reliable and performant. Nevertheless, there is great interest in the development of depleted CMOS silicon detectors, which could achieve similar performances at lower cost of production and complexity. We present recen… ▽ More High Energy Particle Physics experiments at the LHC use hybrid silicon detectors, in both pixel and strip geometry, for their inner trackers. These detectors have proven to be very reliable and performant. Nevertheless, there is great interest in the development of depleted CMOS silicon detectors, which could achieve similar performances at lower cost of production and complexity. We present recent developments of this technology in the framework of the ATLAS CMOS demonstrator project. In particular, studies of two active sensors from LFoundry, CCPD_LF and LFCPIX, and the first fully monolithic prototype MONOPIX will be shown. △ Less

Submitted 18 October, 2017; originally announced October 2017.

Comments: 11 pages, 12 figures, conference proceeding for PSD11

Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector

Authors: M. Dragicevic, M. Friedl, J. Hrubec, H. Steininger, A. Gädda, J. Härkönen, T. Lampén, P. Luukka, T. Peltola, E. Tuominen, E. Tuovinen, A. Winkler, P. Eerola, T. Tuuva, G. Baulieu, G. Boudoul, L. Caponetto, C. Combaret, D. Contardo, T. Dupasquier, G. Gallbit, N. Lumb, L. Mirabito, S. Perries, M. Vander Donckt , et al. (462 additional authors not shown)

Abstract: A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator… ▽ More A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found. △ Less

Submitted 1 June, 2017; originally announced June 2017.

Report number: CMS-NOTE-2017-002

Measurement of the inclusive-isolated prompt-photon cross section in $p\bar{p}$ collisions using the full CDF data set

Authors: CDF Collaboration, T. Aaltonen, M. G. Albrow, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (374 additional authors not shown)

Abstract: A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a functio… ▽ More A measurement of the inclusive production cross section of isolated prompt photons in proton-antiproton collisions at center-of-mass energy $\sqrt{s}$=1.96TeV is presented. The results are obtained using the full Run II data sample collected with the Collider Detector at the Fermilab Tevatron, which corresponds to an integrated luminosity of 9.5fb$^{-1}$. The cross section is measured as a function of photon transverse energy, $E_T^γ$, in the range 30$ < E_T^γ <$500GeV and in the pseudorapidity region $|η^γ|<$1.0. The results are compared with predictions from parton-shower Monte Carlo models at leading order in quantum chromodynamics (QCD) and from next-to-leading order perturbative QCD calculations. The latter show good agreement with the measured cross section. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Comments: submitted to Phys. Rev. D - RC

Report number: FERMILAB-PUB-17-053-PPD

Journal ref: Phys. Rev. D 96, 092003 (2017)

X-ray Metrology of an Array of Active Edge Pixel Sensors for Use at Synchrotron Light Sources

Authors: R. Plackett, K. Arndt, D. Bortoletto, I. Horswell, G. Lockwood, I. Shipsey, N. Tartoni, S. Williams

Abstract: We report on the production of an array of active edge silicon sensors as a prototype of a large array. Four Medipix3RX.1 chips were bump bonded to four single chip sized Advacam active edge n-on-n sensors. These detectors were then mounted into a 2 by 2 array and tested on B16 at Diamond Light Source with an x-ray beam spot of 2um. The results from these tests, compared with optical metrology giv… ▽ More We report on the production of an array of active edge silicon sensors as a prototype of a large array. Four Medipix3RX.1 chips were bump bonded to four single chip sized Advacam active edge n-on-n sensors. These detectors were then mounted into a 2 by 2 array and tested on B16 at Diamond Light Source with an x-ray beam spot of 2um. The results from these tests, compared with optical metrology give confidence that these sensors are sensitive to the physical edge of the sensor, with only a modest loss of efficiency in the final two rows of pixels. We present the efficiency maps recorded with the microfocus beam and a sample powder diffraction measurement. These results give confidence that this sensor technology can be used in much larger arrays of detectors at synchrotron light sources. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 11 pages, 12 figures

Measurement of the $D^+$-meson production cross section at low transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-π^+π^+$ decays fully reconstruc… ▽ More We report on a measurement of the $D^{+}$-meson production cross section as a function of transverse momentum ($p_T$) in proton-antiproton ($p\bar{p}$) collisions at 1.96 TeV center-of-mass energy, using the full data set collected by the Collider Detector at Fermilab in Tevatron Run II and corresponding to 10 fb$^{-1}$ of integrated luminosity. We use $D^{+} \to K^-π^+π^+$ decays fully reconstructed in the central rapidity region $|y|<1$ with transverse momentum down to 1.5 GeV/$c$, a range previously unexplored in $p\bar{p}$ collisions. Inelastic $p\bar{p}$-scattering events are selected online using minimally-biasing requirements followed by an optimized offline selection. The $K^-π^+π^+$ mass distribution is used to identify the $D^+$ signal, and the $D^+$ transverse impact-parameter distribution is used to separate prompt production, occurring directly in the hard scattering process, from secondary production from $b$-hadron decays. We obtain a prompt $D^+$ signal of 2950 candidates corresponding to a total cross section $σ(D^+, 1.5 < p_T < 14.5~\mbox{GeV/}c, |y|<1) = 71.9 \pm 6.8 (\mbox{stat}) \pm 9.3 (\mbox{syst})~μ$b. While the measured cross sections are consistent with theoretical estimates in each $p_T$ bin, the shape of the observed $p_T$ spectrum is softer than the expectation from quantum chromodynamics. The results are unique in $p\bar{p}$ collisions and can improve the shape and uncertainties of future predictions. △ Less

Submitted 27 October, 2016; originally announced October 2016.

Comments: 8 pages, 3 figures

Journal ref: Phys. Rev. D 95, 092006 (2017)

Physics at a 100 TeV pp collider: Higgs and EW symmetry breaking studies

Authors: R. Contino, D. Curtin, A. Katz, M. L. Mangano, G. Panico, M. J. Ramsey-Musolf, G. Zanderighi, C. Anastasiou, W. Astill, G. Bambhaniya, J. K. Behr, W. Bizon, P. S. Bhupal Dev, D. Bortoletto, D. Buttazzo, Q. -H. Cao, F. Caola, J. Chakrabortty, C. -Y. Chen, S. -L. Chen, D. de Florian, F. Dulat, C. Englert, J. A. Frost, B. Fuks , et al. (50 additional authors not shown)

Abstract: This report summarises the physics opportunities for the study of Higgs bosons and the dynamics of electroweak symmetry breaking at the 100 TeV pp collider. This report summarises the physics opportunities for the study of Higgs bosons and the dynamics of electroweak symmetry breaking at the 100 TeV pp collider. △ Less

Submitted 30 June, 2016; originally announced June 2016.

Comments: 187 pages, 94 figures. Chapter 2 of the "Physics at the FCC-hh" Report

Report number: CERN-TH-2016-113

Measurement of the $WW$ and $WZ$ production cross section using final states with a charged lepton and heavy-flavor jets in the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, correspond… ▽ More We present a measurement of the total {\it WW} and {\it WZ} production cross sections in $p\bar{p}$ collision at $\sqrt{s}=1.96$ TeV, in a final state consistent with leptonic $W$ boson decay and jets originating from heavy-flavor quarks from either a $W$ or a $Z$ boson decay. This analysis uses the full data set collected with the CDF II detector during Run II of the Tevatron collider, corresponding to an integrated luminosity of 9.4 fb$^{-1}$. An analysis of the dijet mass spectrum provides $3.7σ$ evidence of the summed production processes of either {\it WW} or {\it WZ} bosons with a measured total cross section of $σ_{WW+WZ} = 13.7\pm 3.9$~pb. Independent measurements of the {\it WW} and {\it WZ} production cross sections are allowed by the different heavy-flavor decay-patterns of the $W$ and $Z$ bosons and by the analysis of secondary-decay vertices reconstructed within heavy-flavor jets. The productions of {\it WW} and of {\it WZ} dibosons are independently seen with significances of $2.9σ$ and $2.1σ$, respectively, with total cross sections of $σ_{WW}= 9.4\pm 4.2$~pb and $σ_{WZ}=3.7^{+2.5}_{-2.2}$~pb. The measurements are consistent with standard-model predictions. △ Less

Submitted 31 July, 2016; v1 submitted 22 June, 2016; originally announced June 2016.

Comments: 19 pages, 11 figures, accepted for publication on Physical Review D

Report number: FERMILAB-PUB-16-229-E

Journal ref: Phys. Rev. D 94, 032008 (2016)

Measurement of $\sin^2θ^{\rm lept}_{\rm eff}$ using $e^+e^-$ pairs from $γ^*/Z$ bosons produced in $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γ^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θ^{\rm lept}_{\rm eff}$, the effective leptonic determination of the… ▽ More At the Fermilab Tevatron proton-antiproton ($p\bar{p}$) collider, Drell-Yan lepton pairs are produced in the process $p \bar{p} \rightarrow e^+e^- + X$ through an intermediate $γ^*/Z$ boson. The forward-backward asymmetry in the polar-angle distribution of the $e^-$ as a function of the $e^+e^-$-pair mass is used to obtain $\sin^2θ^{\rm lept}_{\rm eff}$, the effective leptonic determination of the electroweak-mixing parameter $\sin^2θ_W$. The measurement sample, recorded by the Collider Detector at Fermilab (CDF), corresponds to 9.4~fb$^{-1}$ of integrated luminosity from $p\bar{p}$ collisions at a center-of-momentum energy of 1.96 TeV, and is the full CDF Run II data set. The value of $\sin^2θ^{\rm lept}_{\rm eff}$ is found to be $0.23248 \pm 0.00053$. The combination with the previous CDF measurement based on $μ^+μ^-$ pairs yields $\sin^2θ^{\rm lept}_{\rm eff} = 0.23221 \pm 0.00046$. This result, when interpreted within the specified context of the standard model assuming $\sin^2 θ_W = 1 - M_W^2/M_Z^2$ and that the $W$- and $Z$-boson masses are on-shell, yields $\sin^2θ_W = 0.22400 \pm 0.00045$, or equivalently a $W$-boson mass of $80.328 \pm 0.024 \;{\rm GeV}/c^2$. △ Less

Submitted 10 June, 2016; v1 submitted 9 May, 2016; originally announced May 2016.

Report number: FERMILAB-PUB-16-165-E

Journal ref: Phys. Rev. D 93, 112016 (2016)

Measurement of the forward-backward asymmetry of top-quark and antiquark pairs using the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (372 additional authors not shown)

Abstract: We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference… ▽ More We measure the forward--backward asymmetry of the production of top quark and antiquark pairs in proton-antiproton collisions at center-of-mass energy $\sqrt{s} = 1.96~\mathrm{TeV}$ using the full data set collected by the Collider Detector at Fermilab (CDF) in Tevatron Run II corresponding to an integrated luminosity of $9.1~\rm{fb}^{-1}$. The asymmetry is characterized by the rapidity difference between top quarks and antiquarks ($Δy$), and measured in the final state with two charged leptons (electrons and muons). The inclusive asymmetry, corrected to the entire phase space at parton level, is measured to be $A_{\text{FB}}^{t\bar{t}} = 0.12 \pm 0.13$, consistent with the expectations from the standard-model (SM) and previous CDF results in the final state with a single charged lepton. The combination of the CDF measurements of the inclusive $A_{\text{FB}}^{t\bar{t}}$ in both final states yields $A_{\text{FB}}^{t\bar{t}}=0.160\pm0.045$, which is consistent with the SM predictions. We also measure the differential asymmetry as a function of $Δy$. A linear fit to $A_{\text{FB}}^{t\bar{t}}(|Δy|)$, assuming zero asymmetry at $Δy=0$, yields a slope of $α=0.14\pm0.15$, consistent with the SM prediction and the previous CDF determination in the final state with a single charged lepton. The combined slope of $A_{\text{FB}}^{t\bar{t}}(|Δy|)$ in the two final states is $α=0.227\pm0.057$, which is $2.0σ$ larger than the SM prediction. △ Less

Submitted 29 February, 2016; originally announced February 2016.

Comments: To be submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-045-E

Journal ref: Phys. Rev. D 93, 112005 (2016)

Measurement of the forward-backward asymmetry in low-mass bottom-quark pairs produced in proton-antiproton collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of… ▽ More We report a measurement of the forward-backward asymmetry, $A_{FB}$, in $b\bar{b}$ pairs produced in proton-antiproton collisions and identified by muons from semileptonic $b$-hadron decays. The event sample was collected at a center-of-mass energy of $\sqrt{s}=1.96$ TeV with the CDF II detector and corresponds to 6.9 fb$^{-1}$ of integrated luminosity. We obtain an integrated asymmetry of $A_{FB}(b\bar{b})=(1.2 \pm 0.7)$\% at the particle level for $b$-quark pairs with invariant mass, $m_{b\bar{b}}$, down to $40$ GeV/$c^2$ and measure the dependence of $A_{FB}(b\bar{b})$ on $m_{b\bar{b}}$. The results are compatible with expectations from the standard model. △ Less

Submitted 25 January, 2016; originally announced January 2016.

Comments: submitted to Phys. Rev. D

Report number: FERMILAB-PUB-16-017-E

Measurement of the $B_c^{\pm}$ production cross section in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (374 additional authors not shown)

Abstract: We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of… ▽ More We describe a measurement of the ratio of the cross sections times branching fractions of the $B_c^+$ meson in the decay mode $B_c^+ \rightarrow J/ψμν$ to the $B^+$ meson in the decay mode $B^+ \rightarrow J/ψK^+$ in proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV. The measurement is based on the complete CDF Run II data set, which comes from an integrated luminosity of $8.7\,{\rm fb}^{-1}$. The ratio of the production cross sections times branching fractions for $B_c^+$ and $B_c^+$ mesons with momentum transverse to the beam greater than $6~\textrm{GeV}/c$ and rapidity magnitude smaller than 0.6 is $0.211\pm 0.012~\mbox{(stat)}^{+0.021}_{-0.020}~\mbox{(syst)}$. Using the known $B^+ \rightarrow J/ψK^+$ branching fraction, the known $B^+$ production cross section, and a selection of the predicted $B_c^+ \rightarrow J/ψμν$ branching fractions, the range for the total $B_c^+$ production cross section is estimated. △ Less

Submitted 26 March, 2016; v1 submitted 15 January, 2016; originally announced January 2016.

Comments: 28 pages, 25 figures, and 20 tables. This version is consistent with paper published in Phys. Rev. D on March 1, 2016

Report number: FERMILAB-PUB-16-008-E-PPD

Journal ref: Phys. Rev. D 93, 052001 (2016)

Search for a Low-Mass Neutral Higgs Boson with Suppressed Couplings to Fermions Using Events with Multiphoton Final States

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (373 additional authors not shown)

Abstract: A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γ+ X$, where $H^\pm$ is a charged Higgs boson… ▽ More A search for a Higgs boson with suppressed couplings to fermions, $h_f$, assumed to be the neutral, lower-mass partner of the Higgs boson discovered at the Large Hadron Collider, is reported. Such a Higgs boson could exist in extensions of the standard model with two Higgs doublets, and could be produced via $p\bar{p} \to H^\pm h_f \to W^* h_f h_f \to 4γ+ X$, where $H^\pm$ is a charged Higgs boson. This analysis uses all events with at least three photons in the final state from proton-antiproton collisions at a center-of-mass energy of 1.96~TeV collected by the Collider Detector at Fermilab, corresponding to an integrated luminosity of 9.2~${\rm fb}^{-1}$. No evidence of a signal is observed in the data. Values of Higgs-boson masses between 10 and 100 GeV/$c^2$ are excluded at 95\% Bayesian credibility. △ Less

Submitted 4 January, 2016; originally announced January 2016.

Comments: Submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-15-578-E

Journal ref: Phys. Rev. D 93, 112010 (2016)

Boosting Higgs pair production in the $b\bar{b}b\bar{b}$ final state with multivariate techniques

Authors: J. Katharina Behr, Daniela Bortoletto, James A. Frost, Nathan P. Hartland, Cigdem Issever, Juan Rojo

Abstract: The measurement of Higgs pair production will be a cornerstone of the LHC program in the coming years. Double Higgs production provides a crucial window upon the mechanism of electroweak symmetry breaking and has a unique sensitivity to the Higgs trilinear coupling. We study the feasibility of a measurement of Higgs pair production in the $b\bar{b}b\bar{b}$ final state at the LHC. Our analysis is… ▽ More The measurement of Higgs pair production will be a cornerstone of the LHC program in the coming years. Double Higgs production provides a crucial window upon the mechanism of electroweak symmetry breaking and has a unique sensitivity to the Higgs trilinear coupling. We study the feasibility of a measurement of Higgs pair production in the $b\bar{b}b\bar{b}$ final state at the LHC. Our analysis is based on a combination of traditional cut-based methods with state-of-the-art multivariate techniques. We account for all relevant backgrounds, including the contributions from light and charm jet mis-identification, which are ultimately comparable in size to the irreducible $4b$ QCD background. We demonstrate the robustness of our analysis strategy in a high pileup environment. For an integrated luminosity of $\mathcal{L}=3$ ab$^{-1}$, a signal significance of $S/\sqrt{B}\simeq 3$ is obtained, indicating that the $b\bar{b}b\bar{b}$ final state alone could allow for the observation of double Higgs production at the High-Luminosity LHC. △ Less

Submitted 20 June, 2016; v1 submitted 30 December, 2015; originally announced December 2015.

Comments: 47 pages, 22 figures. v2: updated references, added comparison of post-MVA kinematic distributions. v3: matches published version in EPJC

Report number: OUTP-15-14P

Measurement of vector boson plus $D^{*}(2010)^+$ meson production in $\bar{p}p$ collisions at $\sqrt{s}=1.96\, {\rm TeV}$

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the… ▽ More A measurement of vector boson ($V$) production in conjunction with a $D^{*}(2010)^+$ meson is presented. Using a data sample corresponding to $9.7\, {\rm fb}^{-1}$ of ^Mproton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96\rm~ TeV$ produced by the Fermilab Tevatron, we reconstruct $V+D^{*+}$ samples with the CDF~II detector. The $D^{*+}$ is fully reconstructed in the $D^{*}(2010)^+ \rightarrow D^{0}(\to K^-π^+)π^+$ decay mode. This technique is sensitive to the associated production of vector boson plus charm or bottom mesons. We measure the ratio of production cross sections $σ(W+D^{*})/σ(W)$ = $[1.75\pm 0.13 {\rm (stat)}\pm 0.09 {\rm (syst)}]\% $ and $σ(Z+D^{*})/σ(Z)$ = $[1.5\pm 0.4 {\rm (stat)} \pm 0.2 {\rm (syst)}]\% $ and perform a differential measurement of $dσ(W+D^{*})/dp_T(D^{*})$. Event properties are utilized to determine the fraction of $V+D^{*}(2010)^+$ events originating from different production processes. The results are in agreement with the predictions obtained with the {\sc pythia} program, limiting possible contribution from non-standard-model physics processes. △ Less

Submitted 22 March, 2016; v1 submitted 27 August, 2015; originally announced August 2015.

Report number: FERMILAB-PUB-15-368

Journal ref: Phys. Rev. D 93, 052012 (2016)

A Study of the Energy Dependence of the Underlying Event in Proton-Antiproton Collisions

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, M. Albrow, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (379 additional authors not shown)

Abstract: We study charged particle production in proton-antiproton collisions at 300 GeV, 900 GeV, and 1.96 TeV. We use the direction of the charged particle with the largest transverse momentum in each event to define three regions of eta-phi space; toward, away, and transverse. The average number and the average scalar pT sum of charged particles in the transverse region are sensitive to the modeling of… ▽ More We study charged particle production in proton-antiproton collisions at 300 GeV, 900 GeV, and 1.96 TeV. We use the direction of the charged particle with the largest transverse momentum in each event to define three regions of eta-phi space; toward, away, and transverse. The average number and the average scalar pT sum of charged particles in the transverse region are sensitive to the modeling of the underlying event. The transverse region is divided into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The center-of-mass energy dependence of the various components of the event are studied in detail. The data presented here can be used to constrain and improve QCD Monte Carlo models, resulting in more precise predictions at the LHC energies of 13 and 14 TeV. △ Less

Submitted 27 August, 2015; v1 submitted 21 August, 2015; originally announced August 2015.

Comments: 24 pages, 19 figures, to be submitted to Phys. Rev. D

Report number: FERMILAB-PUB-15-361-E

Journal ref: Phys. Rev. D 92, 092009 (2015)

The Importance of Silicon Detectors for the Higgs Boson Discovery and the Study of its Properties

Authors: D. Bortoletto

Abstract: Recent studies are presented demonstrating the important role played by silicon detectors in the the discovery of the Higgs boson. CMS is planning to replace its in an extended technical stop of the LHC in the winter of 2016 . We present results showing that this replacement will significant increase the sample of Higgs bosons that will be reconstructed enabling precision studies of this particle. Recent studies are presented demonstrating the important role played by silicon detectors in the the discovery of the Higgs boson. CMS is planning to replace its in an extended technical stop of the LHC in the winter of 2016 . We present results showing that this replacement will significant increase the sample of Higgs bosons that will be reconstructed enabling precision studies of this particle. △ Less

Submitted 27 June, 2015; originally announced June 2015.

Comments: on behalf of the CMS Collaboration

Journal ref: Mod. Phys. Lett. A 29, 1430041 (2014) [13 pages]

How and why silicon sensors are becoming more and more intelligent?

Authors: D. Bortoletto

Abstract: This paper describes the historical evolution of silicon detectors from simple strip configurations to hybrid pixel detectors for high energy physics applications. This development has been critical to maintain the necessary physics performance in the high-rate and highdensity environment of the LHC. The importance of pixel detectors and their evolution for future projects and other fields is also… ▽ More This paper describes the historical evolution of silicon detectors from simple strip configurations to hybrid pixel detectors for high energy physics applications. This development has been critical to maintain the necessary physics performance in the high-rate and highdensity environment of the LHC. The importance of pixel detectors and their evolution for future projects and other fields is also described. △ Less

Submitted 16 June, 2015; originally announced June 2015.

Comments: Proceedings for INFIERI-2014

Measurement of the production and differential cross sections of $W^{+}W^{-}$ bosons in association with jets in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We present a measurement of the $W$-boson-pair production cross section in $p\bar{p}$ collisions at 1.96 TeV center-of-mass energy and the first measurement of the differential cross section as a function of jet multiplicity and leading-jet energy. The $W^{+}W^{-}$ cross section is measured in the final state comprising two charged leptons and neutrinos, where either charged lepton can be an elect… ▽ More We present a measurement of the $W$-boson-pair production cross section in $p\bar{p}$ collisions at 1.96 TeV center-of-mass energy and the first measurement of the differential cross section as a function of jet multiplicity and leading-jet energy. The $W^{+}W^{-}$ cross section is measured in the final state comprising two charged leptons and neutrinos, where either charged lepton can be an electron or a muon. Using data collected by the CDF experiment corresponding to $9.7~\rm{fb}^{-1}$ of integrated luminosity, a total of $3027$ collision events consistent with $W^{+}W^{-}$ production are observed with an estimated background contribution of $1790\pm190$ events. The measured total cross section is $σ(p\bar{p} \rightarrow W^{+}W^{-}) = 14.0 \pm 0.6~(\rm{stat})^{+1.2}_{-1.0}~(\rm{syst})\pm0.8~(\rm{lumi})$ pb, consistent with the standard model prediction. △ Less

Submitted 23 June, 2015; v1 submitted 4 May, 2015; originally announced May 2015.

Report number: FERMILAB-PUB-15-191-PPD

Journal ref: Phys. Rev. D 91, 111101 (2015)

Measurement of the top-quark mass in the ${t\bar{t}}$ dilepton channel using the full CDF Run II data set

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run~II at center-of-mass energy $\sqrt{s} = 1.96$ TeV, corresponding to an integrated… ▽ More We present a measurement of the top-quark mass in events containing two leptons (electrons or muons) with a large transverse momentum, two or more energetic jets, and a transverse-momentum imbalance. We use the full proton-antiproton collision data set collected by the CDF experiment during the Fermilab Tevatron Run~II at center-of-mass energy $\sqrt{s} = 1.96$ TeV, corresponding to an integrated luminosity of 9.1 fb$^{-1}$. A special observable is exploited for an optimal reduction of the dominant systematic uncertainty, associated with the knowledge of the absolute energy of the hadronic jets. The distribution of this observable in the selected events is compared to simulated distributions of ${t\bar{t}}$ dilepton signal and background.We measure a value for the top-quark mass of $171.5\pm 1.9~{\rm (stat)}\pm 2.5~{\rm (syst)}$ GeV/$c^2$. △ Less

Submitted 20 June, 2015; v1 submitted 3 May, 2015; originally announced May 2015.

Comments: Submitted to Phys. Rev. D, 11 pages, 5 figures and 2 tables

Report number: FERMILAB-PUB-15-190-E

Journal ref: Phys. Rev. D 92, 032003 (2015)

First measurement of the forward-backward asymmetry in bottom-quark pair production at high mass

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (378 additional authors not shown)

Abstract: We measure the particle-level forward-backward production asymmetry in $b\bar{b}$ pairs with masses $m(b\bar{b})$ larger than 150 GeV/$c^2$, using events with hadronic jets and employing jet charge to distinguish $b$ from $\bar{b}$. The measurement uses 9.5/fb of ppbar collisions at a center of mass energy of 1.96 TeV recorded by the CDF II detector. The asymmetry as a function of $m(b\bar{b})$ is… ▽ More We measure the particle-level forward-backward production asymmetry in $b\bar{b}$ pairs with masses $m(b\bar{b})$ larger than 150 GeV/$c^2$, using events with hadronic jets and employing jet charge to distinguish $b$ from $\bar{b}$. The measurement uses 9.5/fb of ppbar collisions at a center of mass energy of 1.96 TeV recorded by the CDF II detector. The asymmetry as a function of $m(b\bar{b})$ is consistent with zero, as well as with the predictions of the standard model. The measurement disfavors a simple model including an axigluon with a mass of 200 GeV/$c^2$ whereas a model containing a heavier 345 GeV/$c^2$ axigluon is not excluded. △ Less

Submitted 26 April, 2015; originally announced April 2015.

Comments: 11 pages, for submission to Physical Review D

Report number: FERMILAB-PUB-15-153-E

Journal ref: Phys. Rev. D 92, 032006 (2015)

Search for Resonances Decaying to Top and Bottom Quarks with the CDF Experiment

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, F. Anza', G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce , et al. (380 additional authors not shown)

Abstract: We report on a search for charged massive resonances decaying to top ($t$) and bottom ($b$) quarks in the full data set of proton-antiproton collisions at center-of-mass energy of $\sqrt{s} = 1.96$ TeV collected by the CDF~II detector at the Tevatron, corresponding to an integrated luminosity of 9.5 $fb^{-1}$. No significant excess above the standard model (SM) background prediction is observed. W… ▽ More We report on a search for charged massive resonances decaying to top ($t$) and bottom ($b$) quarks in the full data set of proton-antiproton collisions at center-of-mass energy of $\sqrt{s} = 1.96$ TeV collected by the CDF~II detector at the Tevatron, corresponding to an integrated luminosity of 9.5 $fb^{-1}$. No significant excess above the standard model (SM) background prediction is observed. We set 95% Bayesian credibility mass-dependent upper limits on the heavy charged particle production cross section times branching ratio to $t b$. Using a SM extension with a $W^{\prime}$ and left-right-symmetric couplings as a benchmark model, we constrain the $W^{\prime}$ mass and couplings in the 300 to 900 GeV/$c^2$ range. The limits presented here are the most stringent for a charged resonance with mass in the range 300 -- 600 GeV/$c^2$ decaying to top and bottom quarks. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-15-123-PPD

Journal ref: Phys. Rev. Lett. 115, 061801 (2015)

Measurement of central exclusive pi+pi- production in p-pbar collisions at sqrt(s) = 0.9 and 1.96 TeV at CDF

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (381 additional authors not shown)

Abstract: We measure exclusive $π^+π^-$ production in proton-antiproton collisions at center-of-mass energies $\sqrt{s}$ = 0.9 and 1.96 TeV in the Collider Detector at Fermilab. We select events with two oppositely charged particles, assumed to be pions, with pseudorapidity $|η| < 1.3$ and with no other particles detected in $|η| < 5.9$. We require the $π^+π^-$ system to have rapidity $|y|<$ 1.0. The produc… ▽ More We measure exclusive $π^+π^-$ production in proton-antiproton collisions at center-of-mass energies $\sqrt{s}$ = 0.9 and 1.96 TeV in the Collider Detector at Fermilab. We select events with two oppositely charged particles, assumed to be pions, with pseudorapidity $|η| < 1.3$ and with no other particles detected in $|η| < 5.9$. We require the $π^+π^-$ system to have rapidity $|y|<$ 1.0. The production mechanism of these events is expected to be dominated by double pomeron exchange, which constrains the quantum numbers of the central state. The data are potentially valuable for isoscalar meson spectroscopy and for understanding the pomeron in a region of transition between nonperturbative and perturbative quantum chromodynamics. The data extend up to dipion mass $M(π^+π^-)$ = 5000 MeV/$c^2$ and show resonance structures attributed to $f_0$ and $f_2(1270)$ mesons. From the $π^+π^-$ and $K^+K^-$ spectra, we place upper limits on exclusive $χ_{c0}(3415)$ production. △ Less

Submitted 11 June, 2015; v1 submitted 4 February, 2015; originally announced February 2015.

Comments: 7 pages, 4 figures, Minor modifications to the text based on the feedback from the journal referee

Report number: FERMILAB-PUB-15-033-PPD

Journal ref: Phys. Rev. D 91, 091101 (2015)

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Measurement of indirect CP-violating asymmetries in $D^0\to K^+K^-$ and $D^0\to π^+π^-$ decays at CDF

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (377 additional authors not shown)

Abstract: We report a measurement of the indirect CP-violating asymmetries ($A_Γ$) between effective lifetimes of anticharm and charm mesons reconstructed in $D^0\to K^+ K^-$ and $D^0\to π^+π^-$ decays. We use the full data set of proton-antiproton collisions collected by the Collider Detector at Fermilab experiment and corresponding to $9.7$~fb$^{-1}$ of integrated luminosity. The strong-interaction decay… ▽ More We report a measurement of the indirect CP-violating asymmetries ($A_Γ$) between effective lifetimes of anticharm and charm mesons reconstructed in $D^0\to K^+ K^-$ and $D^0\to π^+π^-$ decays. We use the full data set of proton-antiproton collisions collected by the Collider Detector at Fermilab experiment and corresponding to $9.7$~fb$^{-1}$ of integrated luminosity. The strong-interaction decay $D^{*+}\to D^0π^+$ is used to identify the meson at production as $D^0$ or $\overline{D}^0$. We statistically subtract $D^0$ and $\overline{D}^0$ mesons originating from $b$-hadron decays and measure the yield asymmetry between anticharm and charm decays as a function of decay time. We measure $A_Γ(K^+K^-) = (-0.19 \pm 0.15 (stat) \pm 0.04 (syst))\%$ and $A_Γ(π^+π^-)= (-0.01 \pm 0.18 (stat) \pm 0.03 (syst))\%$. The results are consistent with the hypothesis of CP symmetry and their combination yields $A_Γ= (-0.12 \pm 0.12)\%$. △ Less

Submitted 6 January, 2015; v1 submitted 20 October, 2014; originally announced October 2014.

Comments: 8 pages, 3 figures, version published by Phys. Rev. D

Report number: FERMILAB-PUB-14-429-PPD

Journal ref: Phys. Rev. D 90, 111103 (2014)

Updated Measurement of the Single Top Quark Production Cross Section and $V{tb}$ in the Missing Transverse Energy Plus Jets Topology in $p\bar{p}$ Collisions at $\sqrt{s} = 1.96$ TeV

Authors: CDF Collaboration, T. Aaltonen, S. Amerio, D. Amidei, A. Anastassov, A. Annovi, J. Antos, G. Apollinari, J. A. Appel, T. Arisawa, A. Artikov, J. Asaadi, W. Ashmanskas, B. Auerbach, A. Aurisano, F. Azfar, W. Badgett, T. Bae, A. Barbaro-Galtieri, V. E. Barnes, B. A. Barnett, P. Barria, P. Bartos, M. Bauce, F. Bedeschi , et al. (377 additional authors not shown)

Abstract: An updated measurement of the single top quark production cross section is presented using the full data set collected by the Collider Detector at Fermilab (CDF) and corresponding to 9.5 fb${}^{-1}$ of integrated luminosity from proton-antiproton collisions at 1.96 TeV center-of-mass energy. The events selected contain an imbalance in the total transverse energy, jets identified as originating fro… ▽ More An updated measurement of the single top quark production cross section is presented using the full data set collected by the Collider Detector at Fermilab (CDF) and corresponding to 9.5 fb${}^{-1}$ of integrated luminosity from proton-antiproton collisions at 1.96 TeV center-of-mass energy. The events selected contain an imbalance in the total transverse energy, jets identified as originating from $b$ quarks, and no identified leptons. The sum of the $s$- and $t$-channel single top quark cross sections is measured to be $3.53_{-1.16}^{+1.25}$ pb and a lower limit on $V_{tb}$ of 0.63 is obtained at the 95% credibility level. These measurements are combined with previously reported CDF results obtained from events with an imbalance in total transverse energy, jets identified as originating from $b$ quarks, and exactly one identified lepton. The combined cross section is measured to be $3.02_{-0.48}^{+0.49}$ pb and a lower limit on $V{tb}$ of 0.84 is obtained at the 95% credibility level. △ Less

Submitted 21 October, 2014; v1 submitted 18 October, 2014; originally announced October 2014.

Comments: submitted to Phys. Rev. Lett

Report number: FERMILAB-PUB-14-398-E

Journal ref: Phys. Rev. D 93, 032011 (2016)