-
CMS RPC Non-Physics Event Data Automation Ideology
Authors:
A. Dimitrov,
M. Tytgat,
K. Mota Amarilo,
A. Samalan,
K. Skovpen,
G. A. Alves,
E. Alves Coelho,
F. Marujo da Silva,
M. Barroso Ferreira Filho,
E. M. Da Costa,
D. De Jesus Damiao,
S. Fonseca De Souza,
R. Gomes De Souza,
L. Mundim,
H. Nogima,
J. P. Pinheiro,
A. Santoro,
M. Thiel,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Shopova,
G. Sultanov,
L. Litov,
B. Pavlov
, et al. (79 additional authors not shown)
Abstract:
This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating…
▽ More
This paper presents a streamlined framework for real-time processing and analysis of condition data from the CMS experiment Resistive Plate Chambers (RPC). Leveraging data streaming, it uncovers correlations between RPC performance metrics, like currents and rates, and LHC luminosity or environmental conditions. The Java-based framework automates data handling and predictive modeling, integrating extensive datasets into synchronized, query-optimized tables. By segmenting LHC operations and analyzing larger virtual detector objects, the automation enhances monitoring precision, accelerates visualization, and provides predictive insights, revolutionizing RPC performance evaluation and future behavior modeling.
△ Less
Submitted 11 April, 2025;
originally announced April 2025.
-
Machine Learning-Assisted Measurement of Lepton-Jet Azimuthal Angular Asymmetries in Deep-Inelastic Scattering at HERA
Authors:
The H1 collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu,
A. Drees,
G. Eckerlin
, et al. (119 additional authors not shown)
Abstract:
In deep-inelastic positron-proton scattering, the lepton-jet azimuthal angular asymmetry is measured using data collected with the H1 detector at HERA. When the average transverse momentum of the lepton-jet system, $\lvert \vec{P}_\perp \rvert $, is much larger than the total transverse momentum of the system, $\lvert \vec{q}_\perp \rvert$, the asymmetry between parallel and antiparallel configura…
▽ More
In deep-inelastic positron-proton scattering, the lepton-jet azimuthal angular asymmetry is measured using data collected with the H1 detector at HERA. When the average transverse momentum of the lepton-jet system, $\lvert \vec{P}_\perp \rvert $, is much larger than the total transverse momentum of the system, $\lvert \vec{q}_\perp \rvert$, the asymmetry between parallel and antiparallel configurations, $\vec{P}_\perp$ and $\vec{q}_\perp$, is expected to be generated by initial and final state soft gluon radiation and can be predicted using perturbation theory. Quantifying the angular properties of the asymmetry therefore provides an additional test of the strong force. Studying the asymmetry is important for future measurements of intrinsic asymmetries generated by the proton's constituents through Transverse Momentum Dependent (TMD) Parton Distribution Functions (PDFs), where this asymmetry constitutes a dominant background. Moments of the azimuthal asymmetries are measured using a machine learning method for unfolding that does not require binning.
△ Less
Submitted 21 December, 2024; v1 submitted 18 December, 2024;
originally announced December 2024.
-
Measurement of groomed event shape observables in deep-inelastic electron-proton scattering at HERA
Authors:
The H1 collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu,
A. Drees,
G. Eckerlin
, et al. (123 additional authors not shown)
Abstract:
The H1 Collaboration at HERA reports the first measurement of groomed event shape observables in deep inelastic electron-proton scattering (DIS) at $\sqrt{s}=319$ GeV, using data recorded between the years 2003 and 2007 with an integrated luminosity of $351$ pb$^{-1}$. Event shapes provide incisive probes of perturbative and non-perturbative QCD. Grooming techniques have been used for jet measurem…
▽ More
The H1 Collaboration at HERA reports the first measurement of groomed event shape observables in deep inelastic electron-proton scattering (DIS) at $\sqrt{s}=319$ GeV, using data recorded between the years 2003 and 2007 with an integrated luminosity of $351$ pb$^{-1}$. Event shapes provide incisive probes of perturbative and non-perturbative QCD. Grooming techniques have been used for jet measurements in hadronic collisions; this paper presents the first application of grooming to DIS data. The analysis is carried out in the Breit frame, utilizing the novel Centauro jet clustering algorithm that is designed for DIS event topologies. Events are required to have squared momentum-transfer $Q^2 > 150$ GeV$^2$ and inelasticity $ 0.2 < y < 0.7$. We report measurements of the production cross section of groomed event 1-jettiness and groomed invariant mass for several choices of grooming parameter. Monte Carlo model calculations and analytic calculations based on Soft Collinear Effective Theory are compared to the measurements.
△ Less
Submitted 1 August, 2024; v1 submitted 15 March, 2024;
originally announced March 2024.
-
Measurement of the 1-jettiness event shape observable in deep-inelastic electron-proton scattering at HERA
Authors:
The H1 collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu,
A. Drees,
G. Eckerlin
, et al. (124 additional authors not shown)
Abstract:
The H1 Collaboration reports the first measurement of the 1-jettiness event shape observable $τ_1^b$ in neutral-current deep-inelastic electron-proton scattering (DIS). The observable $τ_1^b$ is equivalent to a thrust observable defined in the Breit frame. The data sample was collected at the HERA $ep$ collider in the years 2003-2007 with center-of-mass energy of $\sqrt{s}=319\,\text{GeV}$, corres…
▽ More
The H1 Collaboration reports the first measurement of the 1-jettiness event shape observable $τ_1^b$ in neutral-current deep-inelastic electron-proton scattering (DIS). The observable $τ_1^b$ is equivalent to a thrust observable defined in the Breit frame. The data sample was collected at the HERA $ep$ collider in the years 2003-2007 with center-of-mass energy of $\sqrt{s}=319\,\text{GeV}$, corresponding to an integrated luminosity of $351.1\,\text{pb}^{-1}$. Triple differential cross sections are provided as a function of $τ_1^b$, event virtuality $Q^2$, and inelasticity $y$, in the kinematic region $Q^2>150\,\text{GeV}^{2}$. Single differential cross section are provided as a function of $τ_1^b$ in a limited kinematic range. Double differential cross sections are measured, in contrast, integrated over $τ_1^b$ and represent the inclusive neutral-current DIS cross section measured as a function of $Q^2$ and $y$. The data are compared to a variety of predictions and include classical and modern Monte Carlo event generators, predictions in fixed-order perturbative QCD where calculations up to $\mathcal{O}(α_s^3)$ are available for $τ_1^b$ or inclusive DIS, and resummed predictions at next-to-leading logarithmic accuracy matched to fixed order predictions at $\mathcal{O}(α_s^2)$. These comparisons reveal sensitivity of the 1-jettiness observable to QCD parton shower and resummation effects, as well as the modeling of hadronization and fragmentation. Within their range of validity, the fixed-order predictions provide a good description of the data. Monte Carlo event generators are predictive over the full measured range and hence their underlying models and parameters can be constrained by comparing to the presented data.
△ Less
Submitted 15 March, 2024;
originally announced March 2024.
-
Observation and differential cross section measurement of neutral current DIS events with an empty hemisphere in the Breit frame
Authors:
The H1 collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu,
A. Drees,
G. Eckerlin
, et al. (124 additional authors not shown)
Abstract:
The Breit frame provides a natural frame to analyze lepton-proton scattering events. In this reference frame, the parton model hard interactions between a quark and an exchanged boson defines the coordinate system such that the struck quark is back-scattered along the virtual photon momentum direction. In Quantum Chromodynamics (QCD), higher order perturbative or non-perturbative effects can chang…
▽ More
The Breit frame provides a natural frame to analyze lepton-proton scattering events. In this reference frame, the parton model hard interactions between a quark and an exchanged boson defines the coordinate system such that the struck quark is back-scattered along the virtual photon momentum direction. In Quantum Chromodynamics (QCD), higher order perturbative or non-perturbative effects can change this picture drastically. As Bjorken-$x$ decreases below one half, a rather peculiar event signature is predicted with increasing probability, where no radiation is present in one of the two Breit-frame hemispheres and all emissions are to be found in the other hemisphere. At higher orders in $α_s$ or in the presence of soft QCD effects, predictions of the rate of these events are far from trivial, and that motivates measurements with real data. We report on the first observation of the empty current hemisphere events in electron-proton collisions at the HERA collider using data recorded with the H1 detector at a center-of-mass energy of 319 GeV. The fraction of inclusive neutral-current DIS events with an empty hemisphere is found to be $0.0112 \pm 3.9\,\%_\text{stat} \pm 4.5\,\%_\text{syst} \pm 1.6\,\%_\text{mod}$ in the selected kinematic region of $150< Q^2<1500$ GeV$^2$ and inelasticity $0.14< y<0.7$. The data sample corresponds to an integrated luminosity of 351.1 pb$^{-1}$, sufficient to enable differential cross section measurements of these events. The results show an enhanced discriminating power at lower Bjorken-$x$ among different Monte Carlo event generator predictions.
△ Less
Submitted 1 August, 2024; v1 submitted 13 March, 2024;
originally announced March 2024.
-
Unbinned Deep Learning Jet Substructure Measurement in High $Q^2$ ep collisions at HERA
Authors:
The H1 collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu,
A. Drees,
G. Eckerlin
, et al. (120 additional authors not shown)
Abstract:
The radiation pattern within high energy quark- and gluon-initiated jets (jet substructure) is used extensively as a precision probe of the strong force as well as an environment for optimizing event generators with numerous applications in high energy particle and nuclear physics. Looking at electron-proton collisions is of particular interest as many of the complications present at hadron collid…
▽ More
The radiation pattern within high energy quark- and gluon-initiated jets (jet substructure) is used extensively as a precision probe of the strong force as well as an environment for optimizing event generators with numerous applications in high energy particle and nuclear physics. Looking at electron-proton collisions is of particular interest as many of the complications present at hadron colliders are absent. A detailed study of modern jet substructure observables, jet angularities, in electron-proton collisions is presented using data recorded using the H1 detector at HERA. The measurement is unbinned and multi-dimensional, using machine learning to correct for detector effects. All of the available reconstructed object information of the respective jets is interpreted by a graph neural network, achieving superior precision on a selected set of jet angularities. Training these networks was enabled by the use of a large number of GPUs in the Perlmutter supercomputer at Berkeley Lab. The particle jets are reconstructed in the laboratory frame, using the $k_{\mathrm{T}}$ jet clustering algorithm. Results are reported at high transverse momentum transfer $Q^2>150$ GeV${}^2$, and inelasticity $0.2 < y < 0.7$. The analysis is also performed in sub-regions of $Q^2$, thus probing scale dependencies of the substructure variables. The data are compared with a variety of predictions and point towards possible improvements of such models.
△ Less
Submitted 14 September, 2023; v1 submitted 23 March, 2023;
originally announced March 2023.
-
Machine Learning based tool for CMS RPC currents quality monitoring
Authors:
E. Shumka,
A. Samalan,
M. Tytgat,
M. El Sawy,
G. A. Alves,
F. Marujo,
E. A. Coelho,
E. M. Da Costa,
H. Nogima,
A. Santoro,
S. Fonseca De Souza,
D. De Jesus Damiao,
M. Thiel,
K. Mota Amarilo,
M. Barroso Ferreira Filho,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Soultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov
, et al. (83 additional authors not shown)
Abstract:
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly m…
▽ More
The muon system of the CERN Compact Muon Solenoid (CMS) experiment includes more than a thousand Resistive Plate Chambers (RPC). They are gaseous detectors operated in the hostile environment of the CMS underground cavern on the Large Hadron Collider where pp luminosities of up to $2\times 10^{34}$ $\text{cm}^{-2}\text{s}^{-1}$ are routinely achieved. The CMS RPC system performance is constantly monitored and the detector is regularly maintained to ensure stable operation. The main monitorable characteristics are dark current, efficiency for muon detection, noise rate etc. Herein we describe an automated tool for CMS RPC current monitoring which uses Machine Learning techniques. We further elaborate on the dedicated generalized linear model proposed already and add autoencoder models for self-consistent predictions as well as hybrid models to allow for RPC current predictions in a distant future.
△ Less
Submitted 6 February, 2023;
originally announced February 2023.
-
Quality Control of Mass-Produced GEM Detectors for the CMS GE1/1 Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
T. Beyrouthy,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (157 additional authors not shown)
Abstract:
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton co…
▽ More
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton-proton collisions is expected to exceed $2-3\times10^{34}$~cm$^{-2}$s$^{-1}$ for Run 3 (starting in 2022), and it will be at least $5\times10^{34}$~cm$^{-2}$s$^{-1}$ when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Impact of jet-production data on the next-to-next-to-leading-order determination of HERAPDF2.0 parton distributions
Authors:
H1,
ZEUS Collaborations,
:,
I. Abt,
R. Aggarwal,
V. Andreev,
M. Arratia,
V. Aushev,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
O. Behnke,
A. Belousov,
A. Bertolin,
I. Bloch,
V. Boudry,
G. Brandt,
I. Brock,
N. H. Brook,
R. Brugnera,
A. Bruni,
A. Buniatyan,
P. J. Bussey,
L. Bystritskaya,
A. Caldwell
, et al. (212 additional authors not shown)
Abstract:
The HERAPDF2.0 ensemble of parton distribution functions (PDFs) was introduced in 2015. The final stage is presented, a next-to-next-to-leading-order (NNLO) analysis of the HERA data on inclusive deep inelastic $ep$ scattering together with jet data as published by the H1 and ZEUS collaborations. A perturbative QCD fit, simultaneously of $α_s(M_Z^2)$ and and the PDFs, was performed with the result…
▽ More
The HERAPDF2.0 ensemble of parton distribution functions (PDFs) was introduced in 2015. The final stage is presented, a next-to-next-to-leading-order (NNLO) analysis of the HERA data on inclusive deep inelastic $ep$ scattering together with jet data as published by the H1 and ZEUS collaborations. A perturbative QCD fit, simultaneously of $α_s(M_Z^2)$ and and the PDFs, was performed with the result $α_s(M_Z^2) = 0.1156 \pm 0.0011~{\rm (exp)}~ ^{+0.0001}_{-0.0002}~ {\rm (model}$ ${\rm +~parameterisation)}~ \pm 0.0029~{\rm (scale)}$. The PDF sets of HERAPDF2.0Jets NNLO were determined with separate fits using two fixed values of $α_s(M_Z^2)$, $α_s(M_Z^2)=0.1155$ and $0.118$, since the latter value was already chosen for the published HERAPDF2.0 NNLO analysis based on HERA inclusive DIS data only. The different sets of PDFs are presented, evaluated and compared. The consistency of the PDFs determined with and without the jet data demonstrates the consistency of HERA inclusive and jet-production cross-section data. The inclusion of the jet data reduced the uncertainty on the gluon PDF. Predictions based on the PDFs of HERAPDF2.0Jets NNLO give an excellent description of the jet-production data used as input.
△ Less
Submitted 2 December, 2021;
originally announced December 2021.
-
Measurement of lepton-jet correlation in deep-inelastic scattering with the H1 detector using machine learning for unfolding
Authors:
H1 Collaboration,
V. Andreev,
M. Arratia,
A. Baghdasaryan,
A. Baty,
K. Begzsuren,
A. Belousov,
A. Bolz,
V. Boudry,
G. Brandt,
D. Britzger,
A. Buniatyan,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
Z. Chen,
J. G. Contreras,
L. Cunqueiro Mendez,
J. Cvach,
J. B. Dainton,
K. Daum,
A. Deshpande,
C. Diaconu
, et al. (120 additional authors not shown)
Abstract:
The first measurement of lepton-jet momentum imbalance and azimuthal correlation in lepton-proton scattering at high momentum transfer is presented. These data, taken with the H1 detector at HERA, are corrected for detector effects using an unbinned machine learning algorithm OmniFold, which considers eight observables simultaneously in this first application. The unfolded cross sections are compa…
▽ More
The first measurement of lepton-jet momentum imbalance and azimuthal correlation in lepton-proton scattering at high momentum transfer is presented. These data, taken with the H1 detector at HERA, are corrected for detector effects using an unbinned machine learning algorithm OmniFold, which considers eight observables simultaneously in this first application. The unfolded cross sections are compared to calculations performed within the context of collinear or transverse-momentum-dependent (TMD) factorization in Quantum Chromodynamics (QCD) as well as Monte Carlo event generators. The measurement probes a wide range of QCD phenomena, including TMD parton distribution functions and their evolution with energy in so far unexplored kinematic regions.
△ Less
Submitted 1 April, 2022; v1 submitted 27 August, 2021;
originally announced August 2021.
-
Performance of a Triple-GEM Demonstrator in $pp$ Collisions at the CMS Detector
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstr…
▽ More
After the Phase-2 high-luminosity upgrade to the Large Hadron Collider (LHC), the collision rate and therefore the background rate will significantly increase, particularly in the high $η$ region. To improve both the tracking and triggering of muons, the Compact Muon Solenoid (CMS) Collaboration plans to install triple-layer Gas Electron Multiplier (GEM) detectors in the CMS muon endcaps. Demonstrator GEM detectors were installed in CMS during 2017 to gain operational experience and perform a preliminary investigation of detector performance. We present the results of triple-GEM detector performance studies performed in situ during normal CMS and LHC operations in 2018. The distribution of cluster size and the efficiency to reconstruct high $p_T$ muons in proton--proton collisions are presented as well as the measurement of the environmental background rate to produce hits in the GEM detector.
△ Less
Submitted 22 September, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Modeling the triple-GEM detector response to background particles for the CMS Experiment
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
I. Azhgirey,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi
, et al. (164 additional authors not shown)
Abstract:
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The…
▽ More
An estimate of environmental background hit rate on triple-GEM chambers is performed using Monte Carlo (MC) simulation and compared to data taken by test chambers installed in the CMS experiment (GE1/1) during Run-2 at the Large Hadron Collider (LHC). The hit rate is measured using data collected with proton-proton collisions at 13 TeV and a luminosity of 1.5$\times10^{34}$ cm$^{-2}$ s$^{-1}$. The simulation framework uses a combination of the FLUKA and Geant4 packages to obtain the hit rate. FLUKA provides the radiation environment around the GE1/1 chambers, which is comprised of the particle flux with momentum direction and energy spectra ranging from $10^{-11}$ to $10^{4}$ MeV for neutrons, $10^{-3}$ to $10^{4}$ MeV for $γ$'s, $10^{-2}$ to $10^{4}$ MeV for $e^{\pm}$, and $10^{-1}$ to $10^{4}$ MeV for charged hadrons. Geant4 provides an estimate of detector response (sensitivity) based on an accurate description of detector geometry, material composition and interaction of particles with the various detector layers. The MC simulated hit rate is estimated as a function of the perpendicular distance from the beam line and agrees with data within the assigned uncertainties of 10-14.5%. This simulation framework can be used to obtain a reliable estimate of background rates expected at the High Luminosity LHC.
△ Less
Submitted 8 July, 2021;
originally announced July 2021.
-
Comparison of $pp$ and $p \bar{p}$ differential elastic cross sections and observation of the exchange of a colorless $C$-odd gluonic compound
Authors:
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
J. P. Agnew,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. A. Alves,
G. Antchev,
A. Askew,
P. Aspell,
A. C. S. Assis Jesus,
I. Atanassov,
S. Atkins,
K. Augsten,
V. Aushev,
Y. Aushev,
V. Avati,
C. Avila,
F. Badaud,
J. Baechler,
L. Bagby,
C. Baldenegro Barrera
, et al. (451 additional authors not shown)
Abstract:
We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement…
▽ More
We describe an analysis comparing the $p\bar{p}$ elastic cross section as measured by the D0 Collaboration at a center-of-mass energy of 1.96 TeV to that in $pp$ collisions as measured by the TOTEM Collaboration at 2.76, 7, 8, and 13 TeV using a model-independent approach. The TOTEM cross sections extrapolated to a center-of-mass energy of $\sqrt{s} =$ 1.96 TeV are compared with the D0 measurement in the region of the diffractive minimum and the second maximum of the $pp$ cross section. The two data sets disagree at the 3.4$σ$ level and thus provide evidence for the $t$-channel exchange of a colorless, $C$-odd gluonic compound, also known as the odderon. We combine these results with a TOTEM analysis of the same $C$-odd exchange based on the total cross section and the ratio of the real to imaginary parts of the forward elastic scattering amplitude in $pp$ scattering. The combined significance of these results is larger than 5$σ$ and is interpreted as the first observation of the exchange of a colorless, $C$-odd gluonic compound.
△ Less
Submitted 25 June, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Interstrip Capacitances of the Readout Board used in Large Triple-GEM Detectors for the CMS Muon Upgrade
Authors:
M. Abbas,
M. Abbrescia,
H. Abdalla,
A. Abdelalim,
S. AbuZeid,
A. Agapitos,
A. Ahmad,
A. Ahmed,
W. Ahmed,
C. Aimè,
C. Aruta,
I. Asghar,
P. Aspell,
C. Avila,
J. Babbar,
Y. Ban,
R. Band,
S. Bansal,
L. Benussi,
V. Bhatnagar,
M. Bianco,
S. Bianco,
K. Black,
L. Borgonovi,
O. Bouhali
, et al. (156 additional authors not shown)
Abstract:
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequent…
▽ More
We present analytical calculations, Finite Element Analysis modeling, and physical measurements of the interstrip capacitances for different potential strip geometries and dimensions of the readout boards for the GE2/1 triple-Gas Electron Multiplier detector in the CMS muon system upgrade. The main goal of the study is to find configurations that minimize the interstrip capacitances and consequently maximize the signal-to-noise ratio for the detector. We find agreement at the 1.5--4.8% level between the two methods of calculations and on the average at the 17% level between calculations and measurements. A configuration with halved strip lengths and doubled strip widths results in a measured 27--29% reduction over the original configuration while leaving the total number of strips unchanged. We have now adopted this design modification for all eight module types of the GE2/1 detector and will produce the final detector with this new strip design.
△ Less
Submitted 20 September, 2020;
originally announced September 2020.
-
High Rate RPC detector for LHC
Authors:
F. Lagarde,
A. Fagot,
M. Gul,
C. Roskas,
M. Tytgat,
N. Zaganidis,
S. Fonseca De Souza,
A. Santoro,
F. Torres Da Silva De Araujo,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
A. Dimitrov,
L. Litov,
B. Pavlov,
P. Petkov,
A. Petrov,
S. J. Qian,
D. Han,
W. Yi,
C. Avila,
A. Cabrera
, et al. (77 additional authors not shown)
Abstract:
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The…
▽ More
The High Luminosity LHC (HL-LHC) phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. The foreseen gradual increase of the instantaneous luminosity of up to more than twice its nominal value of $10\times10^{34}\
{\rm cm}^{-1}{\rm s}^{-2}$ during Phase I and Phase II of the LHC running, presents special challenges for the experiments. The region with high pseudo rapidity ($η$) region of the forward muon spectrometer ($2.4 > |η| > 1.9$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz cm$^{-1}$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The current CMS RPC technology cannot sustain the expected background level. A new generation of Glass-RPC (GRPC) using low-resistivity glass was proposed to equip the two most far away of the four high $η$ muon stations of CMS. In their single-gap version they can stand rates of few kHz cm$^{-1}$. Their time precision of about 1 ns can allow to reduce the noise contribution leading to an improvement of the trigger rate. The proposed design for large size chambers is examined and some preliminary results obtained during beam tests at Gamma Irradiation Facility (GIF++) and Super Proton Synchrotron (SPS) at CERN are shown. They were performed to validate the capability of such detectors to support high irradiation environment with limited consequence on their efficiency.
△ Less
Submitted 16 July, 2018;
originally announced July 2018.
-
Production of a light top-squark pair in association with a light non-standard Higgs boson within the NMSSM at the 13 TeV LHC and a 33 TeV proton collider
Authors:
Siba Prasad Das,
Jorge Fraga,
Carlos Avila
Abstract:
We study the potential of the LHC accelerator, and a future 33 TeV proton collider, to observe the production of a light top squark pair in association with the lightest Higgs boson (${\tilde t}_1 {\tilde t}_1 h_1$), as predicted by the Next-to-Minimal Supersymmetric Standard Model (NMSSM). We scan randomly about ten million points of the NMSSM parameter space, allowing all possible decays of the…
▽ More
We study the potential of the LHC accelerator, and a future 33 TeV proton collider, to observe the production of a light top squark pair in association with the lightest Higgs boson (${\tilde t}_1 {\tilde t}_1 h_1$), as predicted by the Next-to-Minimal Supersymmetric Standard Model (NMSSM). We scan randomly about ten million points of the NMSSM parameter space, allowing all possible decays of the lightest top squark and lightest Higgs boson, with no assumptions about their decay rates, except for known physical constraints such as perturbative bounds, Dark matter relic density consistent with recent Planck experiment measurements, Higgs mass bounds on the next to lightest Higgs boson, $h_2$, assuming it is consistent with LHC measurements for the Standard Model Higgs boson, LEP bounds for the chargino mass and Z invisible width, experimental bounds on B meson rare decays and some LHC experimental bounds on SUSY particle spectra different to the particles involved in our study. We find that for low mass top-squark, the dominating decay mode is ${\tilde t}_1 \rightarrow b \tildeχ_1^{\pm}$ with $\tildeχ_1^{\pm} \rightarrow W^{\pm} \tildeχ_1^0 $. We use three bench mark points with the highest cross sections, which naturally fall within the compressed spectra of the top squark, and make a phenomenological analysis to determine the optimal event selection that maximizes the signal significance over backgrounds. We focus on the leptonic decays of both $W$'s and the decay of lightest Higgs boson into b-quarks ($h_1 \rightarrow b \bar b$). Our results show that the high luminosity LHC will have limitations to observe the studied signal and only a proton collider with higher energy will be able to observe the SUSY scenario studied with more than three standard deviations over background.
△ Less
Submitted 19 December, 2017; v1 submitted 12 December, 2017;
originally announced December 2017.
-
Determination of the strong coupling constant $α_s(M_Z)$ in next-to-next-to-leading order QCD using H1 jet cross section measurements
Authors:
H1 collaboration,
V. Andreev,
A. Baghdasaryan,
K. Begzsuren,
A. Belousov,
V. Bertone,
A. Bolz,
V. Boudry,
G. Brandt,
V. Brisson,
D. Britzger,
A. Buniatyan,
A. Bylinkin,
L. Bystritskaya,
A. J. Campbell,
K. B. Cantun Avila,
K. Cerny,
V. Chekelian,
J. G. Contreras,
J. Cvach,
J. Currie,
J. B. Dainton,
K. Daum,
C. Diaconu,
M. Dobre
, et al. (123 additional authors not shown)
Abstract:
The strong coupling constant $α_s(M_Z)$ is determined from inclusive jet and dijet cross sections in neutral-current deep-inelastic $ep$ scattering (DIS) measured at HERA by the H1 collaboration using next-to-next-to-leading order (NNLO) QCD predictions. The dependence of the NNLO predictions and of the resulting value of $α_s(M_Z)$ at the $Z$-boson mass $m_Z$ are studied as a function of the choi…
▽ More
The strong coupling constant $α_s(M_Z)$ is determined from inclusive jet and dijet cross sections in neutral-current deep-inelastic $ep$ scattering (DIS) measured at HERA by the H1 collaboration using next-to-next-to-leading order (NNLO) QCD predictions. The dependence of the NNLO predictions and of the resulting value of $α_s(M_Z)$ at the $Z$-boson mass $m_Z$ are studied as a function of the choice of the renormalisation and factorisation scales. Using inclusive jet and dijet data together, the strong coupling constant is determined to be $α_s(M_Z)=0.1166\,(19)_{\rm exp}\,(24)_{\rm th}$. Complementary, $α_s(M_Z)$ is determined together with parton distribution functions of the proton (PDFs) from jet and inclusive DIS data measured by the H1 experiment. The value $α_s(M_Z)=0.1147\,(25)_{\rm tot}$ obtained is consistent with the determination from jet data alone. The impact of the jet data on the PDFs is studied. The running of the strong coupling is tested at different values of the renormalisation scale and the results are found to be in agreement with expectations.
△ Less
Submitted 16 June, 2021; v1 submitted 21 September, 2017;
originally announced September 2017.
-
R&D towards the CMS RPC Phase-2 upgrade
Authors:
A. Fagot,
A. Cimmino,
S. Crucy,
M. Gul,
A. A. O. Rios,
M. Tytgat,
N. Zaganidis,
S. Aly,
Y. Assran,
A. Radi,
A. Sayed,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
V. Bhatnagar
, et al. (71 additional authors not shown)
Abstract:
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle…
▽ More
The high pseudo-rapidity region of the CMS muon system is covered by Cathode Strip Chambers (CSC) only and lacks redundant coverage despite the fact that it is a challenging region for muons in terms of backgrounds and momentum resolution. In order to maintain good efficiency for the muon trigger in this region additional RPCs are planned to be installed in the two outermost stations at low angle named RE3/1 and RE4/1. These stations will use RPCs with finer granularity and good timing resolution to mitigate background effects and to increase the redundancy of the system.
△ Less
Submitted 14 June, 2016;
originally announced June 2016.
-
High rate, fast timing Glass RPC for the high η CMS muon detectors
Authors:
F. Lagarde,
M. Gouzevitch,
I. Laktineh,
V. Buridon,
X. Chen,
C. Combaret,
A. Eynard,
L. Germani,
G. Grenier,
H. Mathez,
L. Mirabito,
A. Petrukhin,
A. Steen,
W. Tromeuraa,
Y. Wang,
A. Gongab,
N. Moreau,
C. de la Taille,
F. Dulucqac,
A. Cimmino,
S. Crucy,
A. Fagot,
M. Gul,
A. A. O. Rios,
M. Tytgat
, et al. (86 additional authors not shown)
Abstract:
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expec…
▽ More
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided.
△ Less
Submitted 22 July, 2016; v1 submitted 4 June, 2016;
originally announced June 2016.
-
Performance of Resistive Plate Chambers installed during the first long shutdown of the CMS experiment
Authors:
M. Shopova,
A. Aleksandrov,
R. Hadjiiska,
P. Iaydjiev,
G. Sultanov,
M. Rodozov,
S. Stoykova,
Y. Assran,
A. Sayed,
A. Radi,
S. Aly,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese,
P. Verwilligen,
W. Van Doninck,
S. Colafranceschi,
A. Sharma,
L. Benussi,
S. Bianco,
D. Piccolo,
F. Primavera,
A. Cimmino
, et al. (71 additional authors not shown)
Abstract:
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the L…
▽ More
The CMS experiment, located at the CERN Large Hadron Collider, has a redundant muon system composed by three different detector technologies: Cathode Strip Chambers (in the forward regions), Drift Tubes (in the central region) and Resistive Plate Chambers (both its central and forward regions). All three are used for muon reconstruction and triggering. During the first long shutdown (LS1) of the LHC (2013-2014) the CMS muon system has been upgraded with 144 newly installed RPCs on the forth forward stations. The new chambers ensure and enhance the muon trigger efficiency in the high luminosity conditions of the LHC Run2. The chambers have been successfully installed and commissioned. The system has been run successfully and experimental data has been collected and analyzed. The performance results of the newly installed RPCs will be presented.
△ Less
Submitted 22 May, 2016;
originally announced May 2016.
-
Radiation Tests of Real-Sized Prototype RPCs for the Future CMS RPC Upscope
Authors:
K. S. Lee,
S. Choi,
B. S. Hong,
M. Jo,
J. W. Kang,
M. Kang,
H. Kim,
K. Lee,
S. K. Parka,
A. Cimmino,
S. Crucy,
A. Fagot,
M. Gul,
A. A. O. Rios,
M. Tytgat,
N. Zaganidis,
S. Ali,
Y. Assran,
A. Radi,
A. Sayed,
G. Singh,
M. Abbrescia,
G. Iaselli,
M. Maggi,
G. Pugliese
, et al. (71 additional authors not shown)
Abstract:
We report on a systematic study of double-gap and four-gap phenolic resistive plate chambers (RPCs) for future high-η RPC triggers in the CMS. In the present study, we constructed real-sized double-gap and four-gap RPCs with gap thicknesses of 1.6 and 0.8 mm, respectively, with 2-mm-thick phenolic high-pressure-laminated (HPL) plates. We examined the prototype RPCs for cosmic rays and 100 GeV muon…
▽ More
We report on a systematic study of double-gap and four-gap phenolic resistive plate chambers (RPCs) for future high-η RPC triggers in the CMS. In the present study, we constructed real-sized double-gap and four-gap RPCs with gap thicknesses of 1.6 and 0.8 mm, respectively, with 2-mm-thick phenolic high-pressure-laminated (HPL) plates. We examined the prototype RPCs for cosmic rays and 100 GeV muons provided by the SPS H4 beam line at CERN. We applied maximum gamma rates of 1.5 kHz cm-2 provided by 137Cs sources at Korea University and the GIF++ irradiation facility installed at the SPS H4 beam line to examine the rate capabilities of the prototype RPCs. In contrast to the case of the four-gap RPCs, we found the relatively high threshold was conducive to effectively suppressing the rapid increase of strip cluster sizes of muon hits with high voltage, especially when measuring the narrow-pitch strips. The gamma-induced currents drawn in the four-gap RPC were about one-fourth of those drawn in the double-gap RPC. The rate capabilities of both RPC types, proven through the present testing using gamma-ray sources, far exceeded the maximum rate expected in the new high-η endcap RPCs planned for future phase-II LHC runs.
△ Less
Submitted 4 May, 2016; v1 submitted 2 May, 2016;
originally announced May 2016.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.
-
Combination of CDF and D0 W-Boson Mass Measurements
Authors:
CDF Collaboration,
T. Aaltonen,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
T. Bae,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
F. Bedeschi
, et al. (752 additional authors not shown)
Abstract:
We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to…
▽ More
We summarize and combine direct measurements of the mass of the $W$ boson in $\sqrt{s} = 1.96 \text{TeV}$ proton-antiproton collision data collected by CDF and D0 experiments at the Fermilab Tevatron Collider. Earlier measurements from CDF and D0 are combined with the two latest, more precise measurements: a CDF measurement in the electron and muon channels using data corresponding to $2.2 \mathrm{fb}^{-1}$ of integrated luminosity, and a D0 measurement in the electron channel using data corresponding to $4.3 \mathrm{fb}^{-1}$ of integrated luminosity. The resulting Tevatron average for the mass of the $W$ boson is $\MW = 80\,387 \pm 16 \text{MeV}$. Including measurements obtained in electron-positron collisions at LEP yields the most precise value of $\MW = 80\,385 \pm 15 \text{MeV}$.
△ Less
Submitted 1 August, 2013; v1 submitted 29 July, 2013;
originally announced July 2013.
-
Simulation of the CMS Resistive Plate Chambers
Authors:
R. Hadjiiska,
L. Litov,
B. Pavlov,
P. Petkov,
A. Dimitrov,
K. Beernaert,
A. Cimmino,
S. Costantini,
G. Garcia,
J. Lellouch,
A. Marinov,
A. Ocampo,
N. Strobbe,
F. Thyssen,
M. Tytgat,
P. Verwilligen,
E. Yazgan,
N. Zaganidis,
A. Aleksandrov,
V. Genchev,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
Y. Ban
, et al. (39 additional authors not shown)
Abstract:
The Resistive Plate Chamber (RPC) muon subsystem contributes significantly to the formation of the trigger decision and reconstruction of the muon trajectory parameters. Simulation of the RPC response is a crucial part of the entire CMS Monte Carlo software and directly influences the final physical results. An algorithm based on the parametrization of RPC efficiency, noise, cluster size and timin…
▽ More
The Resistive Plate Chamber (RPC) muon subsystem contributes significantly to the formation of the trigger decision and reconstruction of the muon trajectory parameters. Simulation of the RPC response is a crucial part of the entire CMS Monte Carlo software and directly influences the final physical results. An algorithm based on the parametrization of RPC efficiency, noise, cluster size and timing for every strip has been developed. Experimental data obtained from cosmic and proton-proton collisions at $\sqrt{s}=7$ TeV have been used for determination of the parameters. A dedicated validation procedure has been developed. A good agreement between the simulated and experimental data has been achieved.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
Uniformity and Stability of the CMS RPC Detector at the LHC
Authors:
S. Costantini,
K. Beernaert,
A. Cimmino,
G. Garcia,
J. Lellouch,
A. Marinov,
A. Ocampo,
N. Strobbe,
F. Thyssen,
M. Tytgat,
P. Verwilligen,
E. Yazgan,
N. Zaganidis,
A. Dimitrov,
R. Hadjiiska,
L. Litov,
B. Pavlov,
P. Petkov,
A. Aleksandrov,
V. Genchev,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov,
Y. Ban
, et al. (38 additional authors not shown)
Abstract:
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of the RPC detector uniformity and stability during the 2011 data taking period, and preliminary results obtained with 2012 data. The detector uniformity has been ensured with a dedicated High Voltage scan with LHC collisions…
▽ More
The Resistive Plate Chambers (RPCs) are employed in the CMS experiment at the LHC as dedicated trigger system both in the barrel and in the endcap. This note presents results of the RPC detector uniformity and stability during the 2011 data taking period, and preliminary results obtained with 2012 data. The detector uniformity has been ensured with a dedicated High Voltage scan with LHC collisions, in order to determine the optimal operating working voltage of each individual RPC chamber installed in CMS. Emphasis is given on the procedures and results of the High Voltage calibration. Moreover, an increased detector stability has been obtained by automatically taking into account temperature and atmospheric pressure variations in the CMS cavern.
△ Less
Submitted 10 September, 2012;
originally announced September 2012.
-
CMS Resistive Plate Chamber overview, from the present system to the upgrade phase I
Authors:
P. Paolucci,
R. Hadjiiska,
L. Litov,
B. Pavlov,
P. Petkov,
A. Dimitrov,
K. Beernaert,
A. Cimmino,
S. Costantini,
G. Guillaume,
J. Lellouch,
A. Marinov,
A. Ocampo,
N. Strobbe,
F. Thyssen,
M. Tytgat,
P. Verwilligen,
E. Yazgan,
N. Zaganidis,
A. Aleksandrov,
V. Genchev,
P. Iaydjiev,
M. Rodozov,
M. Shopova,
G. Sultanov
, et al. (38 additional authors not shown)
Abstract:
University of Sofia, Faculty of Physics, Atomic Physics Department, 5, James Bourchier Boulevard, BG-1164 Sofia, Bulgaria Ghent University, Department of Physics and Astronomy, Proeftuinstraat 86, BE-9000 Ghent, Belgium Bulgarian Academy of Sciences, Inst. for Nucl. Res. and Nucl. Energy, Tzarigradsko shaussee Boulevard 72, BG-1784 Sofia, Bulgaria Peking University, Department of Technical Physics…
▽ More
University of Sofia, Faculty of Physics, Atomic Physics Department, 5, James Bourchier Boulevard, BG-1164 Sofia, Bulgaria Ghent University, Department of Physics and Astronomy, Proeftuinstraat 86, BE-9000 Ghent, Belgium Bulgarian Academy of Sciences, Inst. for Nucl. Res. and Nucl. Energy, Tzarigradsko shaussee Boulevard 72, BG-1784 Sofia, Bulgaria Peking University, Department of Technical Physics, CN-100 871 Beijing, China Universidad de Los Andes, Apartado Aéreo 4976, Carrera 1E, no. 18A 10, CO-Bogotá, Colombia Academy of Scientific Research and Technology of the Arab Republic of Egypt, 101 Sharia Kasr El-Ain, Cairo, Egypt Panjab University, Department of Physics, Chandigarh Mandir 160 014, India Universita e INFN, Sezione di Bari, Via Orabona 4, IT-70126 Bari, Italy INFN, Laboratori Nazionali di Frascati, PO Box 13, Via Enrico Fermi 40, IT-00044 Frascati, Italy Universita e INFN, Sezione di Napoli, Complesso Univ. Monte S. Angelo, Via Cintia, IT-80126 Napoli, Italy Universita e INFN, Sezione di Pavia, Via Bassi 6, IT-Pavia, Italy Department of Physics and Korea Detector Laboratory, Korea University, Aman-dong 5-ga, Sungbuk-gu, Seou,l Republic of Korea Sungkyunkwan University, Department of Physics 2066, Seobu-ro, Jangan-gu, Suwon, Gyeonggi-Do, Republic of Korea
△ Less
Submitted 10 September, 2012;
originally announced September 2012.
-
Combination of the top-quark mass measurements from the Tevatron collider
Authors:
The CDF,
D0 collaborations,
T. Aaltonen,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
B. Alvarez Gonzalez,
G. Alverson,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
A. Askew
, et al. (840 additional authors not shown)
Abstract:
The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated lumi…
▽ More
The top quark is the heaviest known elementary particle, with a mass about 40 times larger than the mass of its isospin partner, the bottom quark. It decays almost 100% of the time to a $W$ boson and a bottom quark. Using top-antitop pairs at the Tevatron proton-antiproton collider, the CDF and {\dzero} collaborations have measured the top quark's mass in different final states for integrated luminosities of up to 5.8 fb$^{-1}$. This paper reports on a combination of these measurements that results in a more precise value of the mass than any individual decay channel can provide. It describes the treatment of the systematic uncertainties and their correlations. The mass value determined is $173.18 \pm 0.56 \thinspace ({\rm stat}) \pm 0.75 \thinspace ({\rm syst})$ GeV or $173.18 \pm 0.94$ GeV, which has a precision of $\pm 0.54%$, making this the most precise determination of the top quark mass.
△ Less
Submitted 16 November, 2012; v1 submitted 4 July, 2012;
originally announced July 2012.
-
Measurement of the differential cross section dσ/dt in elastic $p\bar{p}$ scattering at sqrt(s)=1.96 TeV
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
G. A. Alves,
M. Aoki,
A. Askew,
S. Atkins,
K. Augsten,
C. Avila,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis,
P. Baringer,
J. Barreto,
J. F. Bartlett
, et al. (384 additional authors not shown)
Abstract:
We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range…
▽ More
We present a measurement of the elastic differential cross section $dσ(p\bar{p}\rightarrow p\bar{p})/dt$ as a function of the four-momentum-transfer squared t. The data sample corresponds to an integrated luminosity of $\approx 31 nb^{-1}$ collected with the D0 detector using dedicated Tevatron $p\bar{p} $ Collider operating conditions at sqrt(s) = 1.96 TeV and covers the range $0.26 <|t|< 1.2 GeV^2$. For $|t|<0.6 GeV^2$, dσ/dt is described by an exponential function of the form $Ae^{-b|t|}$ with a slope parameter $ b = 16.86 \pm 0.10(stat) \pm 0.20(syst) GeV^{-2}$. A change in slope is observed at $|t| \approx 0.6 GeV^2$, followed by a more gradual |t| dependence with increasing values of |t|.
△ Less
Submitted 4 June, 2012;
originally announced June 2012.
-
Combination of CDF and D0 measurements of the W boson helicity in top quark decays
Authors:
The CDF,
D0 Collaborations,
:,
T. Aaltonen,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
B. Álvarez González,
G. Alverson,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
J. A. Appel,
T. Arisawa,
A. Artikov,
J. Asaadi
, et al. (846 additional authors not shown)
Abstract:
We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) an…
▽ More
We report the combination of recent measurements of the helicity of the W boson from top quark decay by the CDF and D0 collaborations, based on data samples corresponding to integrated luminosities of 2.7 - 5.4 fb^-1 of ppbar collisions collected during Run II of the Fermilab Tevatron Collider. Combining measurements that simultaneously determine the fractions of W bosons with longitudinal (f0) and right-handed (f+) helicities, we find f0 = 0.722 \pm 0.081 [\pm 0.062 (stat.) \pm 0.052 (syst.)] and f+ = -0.033 \pm 0.046 [\pm 0.034 (stat.) \pm 0.031 (syst.)]. Combining measurements where one of the helicity fractions is fixed to the value expected in the standard model, we find f0 = 0.682 \pm 0.057 [\pm 0.035 (stat.) \pm 0.046 (syst.)] and f+ = -0.015\pm0.035 [\pm 0.018 (stat.) \pm 0.030 (syst.)]. The results are consistent with standard model expectations.
△ Less
Submitted 23 February, 2012;
originally announced February 2012.
-
Search for pair production of the scalar top quark in muon+tau final states
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
M. Aoki,
A. Askew,
B. Asman,
S. Atkins,
O. Atramentov,
K. Augsten,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis,
P. Baringer
, et al. (385 additional authors not shown)
Abstract:
We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a…
▽ More
We present a search for the pair production of scalar top quarks ($\tilde{t}_{1}$), the lightest supersymmetric partners of the top quarks, in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV, using data corresponding to an integrated luminosity of {7.3 $fb^{-1}$} collected with the \dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$). We investigate final states arising from $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}μτ\tildeν \tildeν$ and $\tilde{t}_{1} \bar{\tilde{t}_{1}} \rightarrow b\bar{b}ττ\tildeν \tildeν$. With no significant excess of events observed above the background expected from the standard model, we set exclusion limits on this production process in the ($m_{\tilde{t}_{1}}$,$m_{\tildeν}$) plane.
△ Less
Submitted 9 February, 2012;
originally announced February 2012.
-
Precise measurement of the top quark mass in the dilepton channel at D0
Authors:
D0 Collaboration,
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Alton,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis
, et al. (397 additional authors not shown)
Abstract:
We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV…
▽ More
We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.
△ Less
Submitted 28 August, 2011; v1 submitted 2 May, 2011;
originally announced May 2011.
-
Measurement of the W boson helicity in top quark decays using 5.4 fb^-1 of ppbar collision data
Authors:
V. M. Abazov,
B. Abbott,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Asman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee,
E. Barberis
, et al. (403 additional authors not shown)
Abstract:
We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and…
▽ More
We present a measurement of the helicity of the W boson produced in top quark decays using ttbar decays in the l+jets and dilepton final states selected from a sample of 5.4 fb^-1 of collisions recorded using the D0 detector at the Fermilab Tevatron ppbar collider. We measure the fractions of longitudinal and right-handed W bosons to be f_0 = 0.669 +- 0.102 [ +- 0.078 (stat.) +- 0.065 (syst.)] and f_+ = 0.023 +- 0.053 [+- 0.041 (stat.) +- 0.034 (syst.)], respectively. This result is consistent at the 98% level with the standard model. A measurement with f_0 fixed to the value from the standard model yields f_+ = 0.010 +- 0.037 [+- 0.022 (stat.) +- 0.030 (syst.) ].
△ Less
Submitted 20 September, 2012; v1 submitted 30 November, 2010;
originally announced November 2010.
-
Search for pair production of the scalar top quark in the electron-muon final state
Authors:
V. M. Abazov,
B. Abbott,
M. Abolins,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee
, et al. (406 additional authors not shown)
Abstract:
We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino (…
▽ More
We report the result of a search for the pair production of the lightest supersymmetric partner of the top quark ($\tilde{t}_1$) in $p\bar{p}$ collisions at a center-of-mass energy of 1.96 TeV at the Fermilab Tevatron collider corresponding to an integrated luminosity of 5.4 fb$^{-1}$. The scalar top quarks are assumed to decay into a $b$ quark, a charged lepton, and a scalar neutrino ($\tildeν$), and the search is performed in the electron plus muon final state. No significant excess of events above the standard model prediction is detected, and improved exclusion limits at the 95% C.L. are set in the the ($M_{\tilde{t}_1}$,$M_{\tildeν}$) mass plane.
△ Less
Submitted 29 September, 2010;
originally announced September 2010.
-
Determination of the width of the top quark
Authors:
V. M. Abazov,
B. Abbott,
M. Abolins,
B. S. Acharya,
M. Adams,
T. Adams,
G. D. Alexeev,
G. Alkhazov,
A. Altona,
G. Alverson,
G. A. Alves,
L. S. Ancu,
M. Aoki,
Y. Arnoud,
M. Arov,
A. Askew,
B. Åsman,
O. Atramentov,
C. Avila,
J. BackusMayes,
F. Badaud,
L. Bagby,
B. Baldin,
D. V. Bandurin,
S. Banerjee
, et al. (406 additional authors not shown)
Abstract:
We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV…
▽ More
We extract the total width of the top quark, Gamma_t, from the partial decay width Gamma(t -> W b) measured using the t-channel cross section for single top quark production and from the branching fraction B(t -> W b) measured in ttbar events using up to 2.3 fb^-1 of integrated luminosity collected by the D0 Collaboration at the Tevatron ppbar Collider. The result is Gamma_t = 1.99 +0.69 -0.55 GeV, which translates to a top-quark lifetime of tau_t = (3.3 +1.3 -0.9) x 10^-25 s. Assuming a high mass fourth generation b' quark and unitarity of the four-generation quark-mixing matrix, we set the first upper limit on |Vtb'| < 0.63 at 95% C.L.
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
