-
A Cryogenic Silicon Interferometer for Gravitational-wave Detection
Authors:
Rana X Adhikari,
Odylio Aguiar,
Koji Arai,
Bryan Barr,
Riccardo Bassiri,
Garilynn Billingsley,
Ross Birney,
David Blair,
Joseph Briggs,
Aidan F Brooks,
Daniel D Brown,
Huy-Tuong Cao,
Marcio Constancio,
Sam Cooper,
Thomas Corbitt,
Dennis Coyne,
Edward Daw,
Johannes Eichholz,
Martin Fejer,
Andreas Freise,
Valery Frolov,
Slawomir Gras,
Anna Green,
Hartmut Grote,
Eric K Gustafson
, et al. (86 additional authors not shown)
Abstract:
The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new inst…
▽ More
The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby universe, as well as observing the universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor.
△ Less
Submitted 9 June, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Effect of heat treatment on mechanical dissipation in Ta$_2$O$_5$ coatings
Authors:
I W Martin,
R Bassiri,
R Nawrodt,
M M Fejer,
A Gretarsson,
E Gustafson,
G Harry,
J Hough,
I MacLaren,
S Penn,
S Reid,
R Route,
S Rowan,
C Schwar,
P Seidel,
J Scott,
A L Woodcraft
Abstract:
Thermal noise arising from mechanical dissipation in dielectric reflective coatings is expected to critically limit the sensitivity of precision measurement systems such as high-resolution optical spectroscopy, optical frequency standards and future generations of interferometric gravitational wave detectors. We present measurements of the effect of post-deposition heat treatment on the temperatur…
▽ More
Thermal noise arising from mechanical dissipation in dielectric reflective coatings is expected to critically limit the sensitivity of precision measurement systems such as high-resolution optical spectroscopy, optical frequency standards and future generations of interferometric gravitational wave detectors. We present measurements of the effect of post-deposition heat treatment on the temperature dependence of the mechanical dissipation in ion-beam sputtered tantalum pentoxide between 11\,K and 300\,K. We find the temperature dependence of the dissipation is strongly dependent on the temperature at which the heat treatment was carried out, and we have identified three dissipation peaks occurring at different heat treatment temperatures. At temperatures below 200\,K, the magnitude of the loss was found to increase with higher heat treatment temperatures, indicating that heat treatment is a significant factor in determining the level of coating thermal noise.
△ Less
Submitted 4 October, 2010;
originally announced October 2010.
-
Beating the spin-down limit on gravitational wave emission from the Crab pulsar
Authors:
The LIGO Scientific Collaboration,
B. Abbott,
R. Abbott,
R. Adhikari,
P. Ajith,
B. Allen,
G. Allen,
R. Amin,
S. B. Anderson,
W. G. Anderson,
M. A. Arain,
M. Araya,
H. Armandula,
P. Armor,
Y. Aso,
S. Aston,
P. Aufmuth,
C. Aulbert,
S. Babak,
S. Ballmer,
H. Bantilan,
B. C. Barish,
C. Barker,
D. Barker,
B. Barr
, et al. (419 additional authors not shown)
Abstract:
We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emissi…
▽ More
We present direct upper limits on gravitational wave emission from the Crab pulsar using data from the first nine months of the fifth science run of the Laser Interferometer Gravitational-wave Observatory (LIGO). These limits are based on two searches. In the first we assume that the gravitational wave emission follows the observed radio timing, giving an upper limit on gravitational wave emission that beats indirect limits inferred from the spin-down and braking index of the pulsar and the energetics of the nebula. In the second we allow for a small mismatch between the gravitational and radio signal frequencies and interpret our results in the context of two possible gravitational wave emission mechanisms.
△ Less
Submitted 22 July, 2008; v1 submitted 30 May, 2008;
originally announced May 2008.
-
Measurements of a low temperature mechanical dissipation peak in a single layer of Ta2O5 doped with TiO2
Authors:
I Martin,
H Armandula,
C Comtet,
M M Fejer,
A Gretarsson,
G Harry,
J Hough,
J-M M Mackowski,
I MacLaren,
C Michel,
J-L Montorio,
N Morgado,
R Nawrodt,
S Penn,
S Reid,
A Remillieux,
R Route,
S Rowan,
C Schwarz,
P Seidel,
W Vodel,
A. Zimmer
Abstract:
Thermal noise arising from mechanical dissipation in oxide coatings is a major limitation to many precision measurement systems, including optical frequency standards, high resolution optical spectroscopy and interferometric gravity wave detectors. Presented here are measurements of dissipation as a function of temperature between 7 K and 290 K in ion-beam sputtered Ta2O5 doped with TiO2, showin…
▽ More
Thermal noise arising from mechanical dissipation in oxide coatings is a major limitation to many precision measurement systems, including optical frequency standards, high resolution optical spectroscopy and interferometric gravity wave detectors. Presented here are measurements of dissipation as a function of temperature between 7 K and 290 K in ion-beam sputtered Ta2O5 doped with TiO2, showing a loss peak at 20 K. Analysis of the peak provides the first evidence of the source of dissipation in doped Ta2O5 coatings, leading to possibilities for the reduction of thermal noise effects.
△ Less
Submitted 19 February, 2008;
originally announced February 2008.
-
Titania-doped tantala/silica coatings for gravitational-wave detection
Authors:
Gregory M. Harry,
Matthew R. Abernathy,
Andres E. Becerra-Toledo,
Helena Armandula,
Eric Black,
Kate Dooley,
Matt Eichenfield,
Chinyere Nwabugwu,
Akira Villar,
D. R. M. Crooks,
Gianpietro Cagnoli,
Jim Hough,
Colin R. How,
Ian MacLaren,
Peter Murray,
Stuart Reid,
Sheila Rowan,
Peter H. Sneddon,
Martin M Fejer,
Roger Route,
Steven D. Penn,
Patrick Ganau,
Jean-Marie Mackowski,
Christophe Michel,
Laurent Pinard
, et al. (1 additional authors not shown)
Abstract:
Reducing thermal noise from optical coatings is crucial to reaching the required sensitivity in next generation interferometric gravitational-waves detectors. Here we show that adding TiO$_2$ to Ta$_2$O$_5$ in Ta$_2$O$_5$/SiO$_2$ coatings reduces the internal friction and in addition present data confirming it reduces thermal noise. We also show that TiO$_2$-doped Ta$_2$O$_5$/SiO$_2$ coatings ar…
▽ More
Reducing thermal noise from optical coatings is crucial to reaching the required sensitivity in next generation interferometric gravitational-waves detectors. Here we show that adding TiO$_2$ to Ta$_2$O$_5$ in Ta$_2$O$_5$/SiO$_2$ coatings reduces the internal friction and in addition present data confirming it reduces thermal noise. We also show that TiO$_2$-doped Ta$_2$O$_5$/SiO$_2$ coatings are close to satisfying the optical absorption requirements of second generation gravitational-wave detectors.
△ Less
Submitted 1 October, 2006;
originally announced October 2006.
-
Mechanical Dissipation in Silicon Flexures
Authors:
S. Reid,
G. Cagnoli,
D. R. M. Crooks,
J. Hough,
P. Murray,
S. Rowan,
M. M. Fejer,
R. Route,
S. Zappe
Abstract:
The thermo-mechanical properties of silicon make it of significant interest as a possible material for mirror substrates and suspension elements for future long-baseline gravitational wave detectors. The mechanical dissipation in 92um thick <110> single-crystal silicon cantilevers has been observed over the temperature range 85 K to 300 K, with dissipation approaching levels down to phi = 4.4E-7…
▽ More
The thermo-mechanical properties of silicon make it of significant interest as a possible material for mirror substrates and suspension elements for future long-baseline gravitational wave detectors. The mechanical dissipation in 92um thick <110> single-crystal silicon cantilevers has been observed over the temperature range 85 K to 300 K, with dissipation approaching levels down to phi = 4.4E-7.
△ Less
Submitted 28 October, 2005; v1 submitted 27 April, 2005;
originally announced April 2005.
-
Mechanical Loss in Tantala/Silica Dielectric Mirror Coatings
Authors:
Steven D. Penn,
Peter H. Sneddon,
Helena Armandula,
Joseph C. Betzwieser,
Gianpietro Cagnoli,
Jordan Camp,
D. R. M. Crooks,
Martin M. Fejer,
Andri M. Gretarsson,
Gregory M. Harry,
Jim Hough,
Scott E. Kittelberger,
Michael J. Mortonson,
Roger Route,
Sheila Rowan,
Christophoros C. Vassiliou
Abstract:
Current interferometric gravitational wave detectors use test masses with mirror coatings formed from multiple layers of dielectric materials, most commonly alternating layers of SiO2 (silica) and Ta2O5 (tantala). However, mechanical loss in the Ta2O5/SiO2 coatings may limit the design sensitivity for advanced detectors. We have investigated sources of mechanical loss in the Ta2O5/SiO2 coatings,…
▽ More
Current interferometric gravitational wave detectors use test masses with mirror coatings formed from multiple layers of dielectric materials, most commonly alternating layers of SiO2 (silica) and Ta2O5 (tantala). However, mechanical loss in the Ta2O5/SiO2 coatings may limit the design sensitivity for advanced detectors. We have investigated sources of mechanical loss in the Ta2O5/SiO2 coatings, including loss associated with the coating-substrate interface, with the coating-layer interfaces, and with the bulk material. Our results indicate that the loss is associated with the bulk coating materials and that the loss of Ta2O5 is substantially larger than that of SiO2.
△ Less
Submitted 24 February, 2003;
originally announced February 2003.
-
Excess Mechanical Loss Associated with Dielectric Mirror Coatings on Test Masses in Interferometric Gravitational Wave Detectors
Authors:
D. R. M. Crooks,
P. Sneddon,
G. Cagnoli,
J. Hough,
S. Rowan,
M. M. Fejer,
E. Gustafson,
R. Route,
N. Nakagawa,
D. Coyne,
G. M. Harry,
A. M. Gretarsson
Abstract:
Interferometric gravitational wave detectors use mirrors whose substrates are formed from materials of low intrinsic mechanical dissipation. The two most likely choices for the test masses in future advanced detectors are fused silica or sapphire. These test masses must be coated to form mirrors, highly reflecting at 1064nm. We have measured the excess mechanical losses associated with adding di…
▽ More
Interferometric gravitational wave detectors use mirrors whose substrates are formed from materials of low intrinsic mechanical dissipation. The two most likely choices for the test masses in future advanced detectors are fused silica or sapphire. These test masses must be coated to form mirrors, highly reflecting at 1064nm. We have measured the excess mechanical losses associated with adding dielectric coatings to substrates of fused silica and calculate the effect of the excess loss on the thermal noise in an advanced interferometer.
△ Less
Submitted 20 September, 2001;
originally announced September 2001.
