-
Comparing recent PTA results on the nanohertz stochastic gravitational wave background
Authors:
The International Pulsar Timing Array Collaboration,
G. Agazie,
J. Antoniadis,
A. Anumarlapudi,
A. M. Archibald,
P. Arumugam,
S. Arumugam,
Z. Arzoumanian,
J. Askew,
S. Babak,
M. Bagchi,
M. Bailes,
A. -S. Bak Nielsen,
P. T. Baker,
C. G. Bassa,
A. Bathula,
B. Bécsy,
A. Berthereau,
N. D. R. Bhat,
L. Blecha,
M. Bonetti,
E. Bortolas,
A. Brazier,
P. R. Brook,
M. Burgay
, et al. (220 additional authors not shown)
Abstract:
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTA…
▽ More
The Australian, Chinese, European, Indian, and North American pulsar timing array (PTA) collaborations recently reported, at varying levels, evidence for the presence of a nanohertz gravitational wave background (GWB). Given that each PTA made different choices in modeling their data, we perform a comparison of the GWB and individual pulsar noise parameters across the results reported from the PTAs that constitute the International Pulsar Timing Array (IPTA). We show that despite making different modeling choices, there is no significant difference in the GWB parameters that are measured by the different PTAs, agreeing within $1σ$. The pulsar noise parameters are also consistent between different PTAs for the majority of the pulsars included in these analyses. We bridge the differences in modeling choices by adopting a standardized noise model for all pulsars and PTAs, finding that under this model there is a reduction in the tension in the pulsar noise parameters. As part of this reanalysis, we "extended" each PTA's data set by adding extra pulsars that were not timed by that PTA. Under these extensions, we find better constraints on the GWB amplitude and a higher signal-to-noise ratio for the Hellings and Downs correlations. These extensions serve as a prelude to the benefits offered by a full combination of data across all pulsars in the IPTA, i.e., the IPTA's Data Release 3, which will involve not just adding in additional pulsars, but also including data from all three PTAs where any given pulsar is timed by more than as single PTA.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
The second data release from the European Pulsar Timing Array: VI. Challenging the ultralight dark matter paradigm
Authors:
Clemente Smarra,
Boris Goncharov,
Enrico Barausse,
J. Antoniadis,
S. Babak,
A. -S. Bak Nielsen,
C. G. Bassa,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
G. Desvignes,
M. Falxa,
R. D. Ferdman,
A. Franchini,
J. R. Gair,
E. Graikou,
J. -M. Grie
, et al. (46 additional authors not shown)
Abstract:
Pulsar Timing Array experiments probe the presence of possible scalar or pseudoscalar ultralight dark matter particles through decade-long timing of an ensemble of galactic millisecond radio pulsars. With the second data release of the European Pulsar Timing Array, we focus on the most robust scenario, in which dark matter interacts only gravitationally with ordinary baryonic matter. Our results s…
▽ More
Pulsar Timing Array experiments probe the presence of possible scalar or pseudoscalar ultralight dark matter particles through decade-long timing of an ensemble of galactic millisecond radio pulsars. With the second data release of the European Pulsar Timing Array, we focus on the most robust scenario, in which dark matter interacts only gravitationally with ordinary baryonic matter. Our results show that ultralight particles with masses $10^{-24.0}~\text{eV} \lesssim m \lesssim 10^{-23.3}~\text{eV}$ cannot constitute $100\%$ of the measured local dark matter density, but can have at most local density $ρ\lesssim 0.3$ GeV/cm$^3$.
△ Less
Submitted 25 October, 2023; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
P. Auclair,
S. Babak,
M. Bagchi,
A. -S. Bak Nielsen,
E. Barausse,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
C. Caprini,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
M. Crisostomi,
S. Dandapat,
D. Deb
, et al. (89 additional authors not shown)
Abstract:
The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling sup…
▽ More
The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.
△ Less
Submitted 15 May, 2024; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals
Authors:
J. Antoniadis,
P. Arumugam,
S. Arumugam,
S. Babak,
M. Bagchi,
A. S. Bak Nielsen,
C. G. Bassa,
A. Bathula,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
S. Dandapat,
D. Deb,
S. Desai,
G. Desvignes,
N. Dhanda-Batra,
C. Dwivedi
, et al. (75 additional authors not shown)
Abstract:
We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results o…
▽ More
We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.
△ Less
Submitted 25 June, 2024; v1 submitted 28 June, 2023;
originally announced June 2023.
-
The second data release from the European Pulsar Timing Array I. The dataset and timing analysis
Authors:
J. Antoniadis,
S. Babak,
A. -S. Bak Nielsen,
C. G. Bassa,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
A. Chalumeau,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
G. Desvignes,
M. Falxa,
R. D. Ferdman,
A. Franchini,
J. R. Gair,
B. Goncharov,
E. Graikou,
J. -M. Grießmeier,
L. Guillemot,
Y. J. Guo
, et al. (44 additional authors not shown)
Abstract:
Pulsar timing arrays offer a probe of the low-frequency gravitational wave spectrum (1 - 100 nanohertz), which is intimately connected to a number of markers that can uniquely trace the formation and evolution of the Universe. We present the dataset and the results of the timing analysis from the second data release of the European Pulsar Timing Array (EPTA). The dataset contains high-precision pu…
▽ More
Pulsar timing arrays offer a probe of the low-frequency gravitational wave spectrum (1 - 100 nanohertz), which is intimately connected to a number of markers that can uniquely trace the formation and evolution of the Universe. We present the dataset and the results of the timing analysis from the second data release of the European Pulsar Timing Array (EPTA). The dataset contains high-precision pulsar timing data from 25 millisecond pulsars collected with the five largest radio telescopes in Europe, as well as the Large European Array for Pulsars. The dataset forms the foundation for the search for gravitational waves by the EPTA, presented in associated papers. We describe the dataset and present the results of the frequentist and Bayesian pulsar timing analysis for individual millisecond pulsars that have been observed over the last ~25 years. We discuss the improvements to the individual pulsar parameter estimates, as well as new measurements of the physical properties of these pulsars and their companions. This data release extends the dataset from EPTA Data Release 1 up to the beginning of 2021, with individual pulsar datasets with timespans ranging from 14 to 25 years. These lead to improved constraints on annual parallaxes, secular variation of the orbital period, and Shapiro delay for a number of sources. Based on these results, we derived astrophysical parameters that include distances, transverse velocities, binary pulsar masses, and annual orbital parallaxes.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Practical approaches to analyzing PTA data: Cosmic strings with six pulsars
Authors:
Hippolyte Quelquejay Leclere,
Pierre Auclair,
Stanislav Babak,
Aurélien Chalumeau,
Danièle A. Steer,
J. Antoniadis,
A. -S. Bak Nielsen,
C. G. Bassa,
A. Berthereau,
M. Bonetti,
E. Bortolas,
P. R. Brook,
M. Burgay,
R. N. Caballero,
D. J. Champion,
S. Chanlaridis,
S. Chen,
I. Cognard,
G. Desvignes,
M. Falxa,
R. D. Ferdman,
A. Franchini,
J. R. Gair,
B. Goncharov,
E. Graikou
, et al. (47 additional authors not shown)
Abstract:
We search for a stochastic gravitational wave background (SGWB) generated by a network of cosmic strings using six millisecond pulsars from Data Release 2 (DR2) of the European Pulsar Timing Array (EPTA). We perform a Bayesian analysis considering two models for the network of cosmic string loops, and compare it to a simple power-law model which is expected from the population of supermassive blac…
▽ More
We search for a stochastic gravitational wave background (SGWB) generated by a network of cosmic strings using six millisecond pulsars from Data Release 2 (DR2) of the European Pulsar Timing Array (EPTA). We perform a Bayesian analysis considering two models for the network of cosmic string loops, and compare it to a simple power-law model which is expected from the population of supermassive black hole binaries. Our main strong assumption is that the previously reported common red noise process is a SGWB. We find that the one-parameter cosmic string model is slightly favored over a power-law model thanks to its simplicity. If we assume a two-component stochastic signal in the data (supermassive black hole binary population and the signal from cosmic strings), we get a $95\%$ upper limit on the string tension of $\log_{10}(Gμ) < -9.9$ ($-10.5$) for the two cosmic string models we consider. In extended two-parameter string models, we were unable to constrain the number of kinks. We test two approximate and fast Bayesian data analysis methods against the most rigorous analysis and find consistent results. These two fast and efficient methods are applicable to all SGWBs, independent of their source, and will be crucial for analysis of extended data sets.
△ Less
Submitted 3 May, 2024; v1 submitted 21 June, 2023;
originally announced June 2023.
-
From Spin Noise to Systematics: Stochastic Processes in the First International Pulsar Timing Array Data Release
Authors:
L. Lentati,
R. M. Shannon,
W. A. Coles,
J. P. W. Verbiest,
R. van Haasteren,
J. A. Ellis,
R. N. Caballero,
R. N. Manchester,
Z. Arzoumanian,
S. Babak,
C. G. Bassa,
N. D. R. Bhat,
P. Brem,
M. Burgay,
S. Burke-Spolaor,
D. Champion,
S. Chatterjee,
I. Cognard,
J. M. Cordes,
S. Dai,
P. Demorest,
G. Desvignes,
T. Dolch,
R. D. Ferdman,
E. Fonseca
, et al. (58 additional authors not shown)
Abstract:
We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single…
▽ More
We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single observing system, or frequency band. We show the improved radio-frequency coverage and presence of overlapping data from different observing systems in the IPTA data set enables us to separate both system and band-dependent effects with much greater efficacy than in the individual PTA data sets. For example, we show that PSR J1643$-$1224 has, in addition to DM variations, significant band-dependent noise that is coherent between PTAs which we interpret as coming from time-variable scattering or refraction in the ionised interstellar medium. Failing to model these different contributions appropriately can dramatically alter the astrophysical interpretation of the stochastic signals observed in the residuals. In some cases, the spectral exponent of the spin noise signal can vary from 1.6 to 4 depending upon the model, which has direct implications for the long-term sensitivity of the pulsar to a stochastic gravitational-wave (GW) background. By using a more appropriate model, however, we can greatly improve a pulsar's sensitivity to GWs. For example, including system and band-dependent signals in the PSR J0437$-$4715 data set improves the upper limit on a fiducial GW background by $\sim 60\%$ compared to a model that includes DM variations and spin-noise only.
△ Less
Submitted 16 February, 2016;
originally announced February 2016.
-
European Pulsar Timing Array Limits on Continuous Gravitational Waves from Individual Supermassive Black Hole Binaries
Authors:
Stanislav Babak,
Antoine Petiteau,
Alberto Sesana,
Patrick Brem,
Pablo A. Rosado,
Stephen R. Taylor,
Antoine Lassus,
Jason W. T. Hessels,
Cees G. Bassa,
Marta Burgay,
R. Nicolas Caballero,
David J. Champion,
Ismael Cognard,
Gregory Desvignes,
Jonathan R. Gair,
Lucas Guillemot,
Gemma H. Janssen,
Ramesh Karuppusamy,
Michael Kramer,
Patrick Lazarus,
K. J. Lee,
Lindley Lentati,
Kuo Liu,
Chiara M. F. Mingarelli,
Stefan Oslowski
, et al. (11 additional authors not shown)
Abstract:
We have searched for continuous gravitational wave (CGW) signals produced by individually resolvable, circular supermassive black hole binaries (SMBHBs) in the latest EPTA dataset, which consists of ultra-precise timing data on 41 millisecond pulsars. We develop frequentist and Bayesian detection algorithms to search both for monochromatic and frequency-evolving systems. None of the adopted algori…
▽ More
We have searched for continuous gravitational wave (CGW) signals produced by individually resolvable, circular supermassive black hole binaries (SMBHBs) in the latest EPTA dataset, which consists of ultra-precise timing data on 41 millisecond pulsars. We develop frequentist and Bayesian detection algorithms to search both for monochromatic and frequency-evolving systems. None of the adopted algorithms show evidence for the presence of such a CGW signal, indicating that the data are best described by pulsar and radiometer noise only. Depending on the adopted detection algorithm, the 95\% upper limit on the sky-averaged strain amplitude lies in the range $6\times 10^{-15}<A<1.5\times10^{-14}$ at $5{\rm nHz}<f<7{\rm nHz}$. This limit varies by a factor of five, depending on the assumed source position, and the most constraining limit is achieved towards the positions of the most sensitive pulsars in the timing array. The most robust upper limit -- obtained via a full Bayesian analysis searching simultaneously over the signal and pulsar noise on the subset of ours six best pulsars -- is $A\approx10^{-14}$. These limits, the most stringent to date at $f<10{\rm nHz}$, exclude the presence of sub-centiparsec binaries with chirp mass $\cal{M}_c>10^9$M$_\odot$ out to a distance of about 25Mpc, and with $\cal{M}_c>10^{10}$M$_\odot$ out to a distance of about 1Gpc ($z\approx0.2$). We show that state-of-the-art SMBHB population models predict $<1\%$ probability of detecting a CGW with the current EPTA dataset, consistent with the reported non-detection. We stress, however, that PTA limits on individual CGW have improved by almost an order of magnitude in the last five years. The continuing advances in pulsar timing data acquisition and analysis techniques will allow for strong astrophysical constraints on the population of nearby SMBHBs in the coming years.
△ Less
Submitted 11 September, 2015; v1 submitted 7 September, 2015;
originally announced September 2015.
-
Pulsar Timing Arrays and Gravity Tests in the Radiative Regime
Authors:
K. J. Lee
Abstract:
In this paper, we focus on testing gravity theories in the radiative regime using pulsar timing array observations. After reviewing current techniques to measure the dispersion and alternative polarization of gravitational waves, we extend the framework to the most general situations, where the combinations of a massive graviton and alternative polarization modes are considered. The atlas of the H…
▽ More
In this paper, we focus on testing gravity theories in the radiative regime using pulsar timing array observations. After reviewing current techniques to measure the dispersion and alternative polarization of gravitational waves, we extend the framework to the most general situations, where the combinations of a massive graviton and alternative polarization modes are considered. The atlas of the Hellings-Downs functions is completed by the new calculations for these dispersive alternative polarization modes. We find that each mode and corresponding graviton mass introduce characteristic features in the Hellings-Downs function. Thus, in principal, we can not only detect each polarization mode, measure the corresponding graviton mass, but also discriminate the different scenarios. In this way, we can test gravity theories in the radiative regime in a generalized fashion, and such method is a direct experiment, where one can address the gauge symmetry of the gravity theories in their linearised limits. Although current pulsar timing still lacks enough stable pulsars and sensitivity for such practices, we expect that future telescopes with larger collecting area could make such experiments be feasible.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
The optimal schedule for pulsar timing array observations
Authors:
K. J. Lee,
C. G. Bassa,
R. Karuppusamy,
M. Kramer,
R. Smits,
B. W. Stappers
Abstract:
In order to maximize the sensitivity of pulsar timing arrays to a stochastic gravitational wave background, we present computational techniques to optimize observing schedules. The techniques are applicable to both single and multi-telescope experiments. The observing schedule is optimized for each telescope by adjusting the observing time allocated to each pulsar while keeping the total amount of…
▽ More
In order to maximize the sensitivity of pulsar timing arrays to a stochastic gravitational wave background, we present computational techniques to optimize observing schedules. The techniques are applicable to both single and multi-telescope experiments. The observing schedule is optimized for each telescope by adjusting the observing time allocated to each pulsar while keeping the total amount of observing time constant. The optimized schedule depends on the timing noise characteristics of each individual pulsar as well as the performance of instrumentation. Several examples are given to illustrate the effects of different types of noise. A method to select the most suitable pulsars to be included in a pulsar timing array project is also presented.
△ Less
Submitted 19 April, 2012;
originally announced April 2012.
-
Pulsars and Gravitational Waves
Authors:
K. J. Lee,
R. X. Xu,
G. J. Qiao
Abstract:
The relationship between pulsar-like compact stars and gravitational waves is briefly reviewed. Due to regular spins, pulsars could be useful tools for us to detect ~nano-Hz low-frequency gravitational waves by pulsar-timing array technique; besides, they would also be ~kilo-Hz high-frequency gravitational wave radiators because of their compactness. The wave strain of an isolate pulsar depends on…
▽ More
The relationship between pulsar-like compact stars and gravitational waves is briefly reviewed. Due to regular spins, pulsars could be useful tools for us to detect ~nano-Hz low-frequency gravitational waves by pulsar-timing array technique; besides, they would also be ~kilo-Hz high-frequency gravitational wave radiators because of their compactness. The wave strain of an isolate pulsar depends on the equation state of cold matter at supra-nuclear densities. Therefore, a real detection of gravitational wave should be very meaningful in gravity physics, micro-theory of elementary strong interaction, and astronomy.
△ Less
Submitted 13 September, 2011; v1 submitted 5 September, 2011;
originally announced September 2011.
-
Testing Gravity Theories In The Radiative Regime Using Pulsar Timing Arrays
Authors:
K. J. Lee
Abstract:
General relativity has predicted the existence of gravitational waves (GW), which are waves of the distortions of space-time with two degrees of polarization and the propagation speed of light. Alternative theories predict more polarizations, up to a maximum of six, and possible deviation of propagation speed from the light speed. The present paper reviews recent proposals to test the gravity theo…
▽ More
General relativity has predicted the existence of gravitational waves (GW), which are waves of the distortions of space-time with two degrees of polarization and the propagation speed of light. Alternative theories predict more polarizations, up to a maximum of six, and possible deviation of propagation speed from the light speed. The present paper reviews recent proposals to test the gravity theories in the radiation regime by observing GWs using pulsar timing arrays.
△ Less
Submitted 27 May, 2011;
originally announced May 2011.
-
Gravitational wave astronomy of single sources with a pulsar timing array
Authors:
K. J. Lee,
N. Wex,
M. Kramer,
B. W. Stappers,
C. G. Bassa,
G. H. Janssen,
R. Karuppusamy,
R. Smits
Abstract:
Abbreviated:
We investigate the potential of detecting the gravitational wave from individual binary black hole systems using pulsar timing arrays (PTAs) and calculate the accuracy for determining the GW properties. This is done in a consistent analysis, which at the same time accounts for the measurement of the pulsar distances via the timing parallax.
We find that, at low redshift, a PTA is…
▽ More
Abbreviated:
We investigate the potential of detecting the gravitational wave from individual binary black hole systems using pulsar timing arrays (PTAs) and calculate the accuracy for determining the GW properties. This is done in a consistent analysis, which at the same time accounts for the measurement of the pulsar distances via the timing parallax.
We find that, at low redshift, a PTA is able to detect the nano-Hertz GW from super massive black hole binary systems with masses of $\sim10^8 - 10^{10}\,M_{\sun}$ less than $\sim10^5$\,years before the final merger, and those with less than $\sim10^3 - 10^4$ years before merger may allow us to detect the evolution of binaries.
We derive an analytical expression to describe the accuracy of a pulsar distance measurement via timing parallax. We consider five years of bi-weekly observations at a precision of 15\,ns for close-by ($\sim 0.5 - 1$\,kpc) pulsars. Timing twenty pulsars would allow us to detect a GW source with an amplitude larger than $5\times 10^{-17}$. We calculate the corresponding GW and binary orbital parameters and their measurement precision. The accuracy of measuring the binary orbital inclination angle, the sky position, and the GW frequency are calculated as functions of the GW amplitude. We note that the "pulsar term", which is commonly regarded as noise, is essential for obtaining an accurate measurement for the GW source location.
We also show that utilizing the information encoded in the GW signal passing the Earth also increases the accuracy of pulsar distance measurements. If the gravitational wave is strong enough, one can achieve sub-parsec distance measurements for nearby pulsars with distance less than $\sim 0.5 - 1$\,kpc.
△ Less
Submitted 1 March, 2011;
originally announced March 2011.
-
The Study of the Pioneer Anomaly: New Data and Objectives for New Investigation
Authors:
Slava G. Turyshev,
Viktor T. Toth,
Larry R. Kellogg,
Eunice. L. Lau,
Kyong J. Lee
Abstract:
Radiometric tracking data from Pioneer 10 and 11 spacecraft has consistently indicated the presence of a small, anomalous, Doppler frequency drift, uniformly changing with a rate of ~6 x 10^{-9} Hz/s; the drift can be interpreted as a constant sunward acceleration of each particular spacecraft of a_P = (8.74 \pm 1.33) x 10^{-10} m/s^2. This signal is known as the Pioneer anomaly; the nature of t…
▽ More
Radiometric tracking data from Pioneer 10 and 11 spacecraft has consistently indicated the presence of a small, anomalous, Doppler frequency drift, uniformly changing with a rate of ~6 x 10^{-9} Hz/s; the drift can be interpreted as a constant sunward acceleration of each particular spacecraft of a_P = (8.74 \pm 1.33) x 10^{-10} m/s^2. This signal is known as the Pioneer anomaly; the nature of this anomaly remains unexplained. We discuss the efforts to retrieve the entire data sets of the Pioneer 10/11 radiometric Doppler data. We also report on the recently recovered telemetry files that may be used to reconstruct the engineering history of both spacecraft using original project documentation and newly developed software tools. We discuss possible ways to further investigate the discovered effect using these telemetry files in conjunction with the analysis of the much extended Doppler data. We present the main objectives of new upcoming study of the Pioneer anomaly, namely i) analysis of the early data that could yield the direction of the anomaly, ii) analysis of planetary encounters, that should tell more about the onset of the anomaly, iii) analysis of the entire dataset, to better determine the anomaly's temporal behavior, iv) comparative analysis of individual anomalous accelerations for the two Pioneers, v) the detailed study of on-board systematics, and vi) development of a thermal-electric-dynamical model using on-board telemetry. The outlined strategy may allow for a higher accuracy solution for a_P and, possibly, will lead to an unambiguous determination of the origin of the Pioneer anomaly.
△ Less
Submitted 6 March, 2006; v1 submitted 21 December, 2005;
originally announced December 2005.