-
A Switching Thrust Tracking Controller for Load Constrained Wind Turbines
Authors:
Jean Gonzalez Silva,
Daan van der Hoek,
Sebastiaan Paul Mulders,
Riccardo Ferrari,
Jan-Willem van Wingerden
Abstract:
Wind turbines are prone to structural degradation, particularly in offshore locations. Based on the structural health condition of the tower, power de-rating strategies can be used to reduce structural loads at the cost of power losses.This paper introduces a novel closed-loop switching control architecture to constrain the thrust in individual turbines. By taking inspiration from developments in…
▽ More
Wind turbines are prone to structural degradation, particularly in offshore locations. Based on the structural health condition of the tower, power de-rating strategies can be used to reduce structural loads at the cost of power losses.This paper introduces a novel closed-loop switching control architecture to constrain the thrust in individual turbines. By taking inspiration from developments in the field of reference governors, an existing demanded power tracking controller is extended by a thrust tracking controller. The latter is activated only when a user-defined constraint on fore-aft thrust force is exceeded, which can be set based on the actual damage status of the turbine. Having a down-regulation with monotonic aerodynamic load response, a simple linear thrust tracking controller is proposed. Such a scheme can reduce aerodynamic loads while incurring acceptable losses on power production which, in a wind farm setting, can be compensated for by other turbines. Large eddy simulations demonstrate the performance of the proposed scheme on satisfying thrust constraints.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Damping Identification of an Operational Offshore Wind Turbine using Kalman filter-based Subspace Identification
Authors:
Aemilius A W van Vondelen,
Alexandros Iliopoulos,
Sachin T Navalkar,
Daan C van der Hoek,
Jan-Willem van Wingerden
Abstract:
Operational Modal Analysis (OMA) provides essential insights into the structural dynamics of an Offshore Wind Turbine (OWT). In these dynamics, damping is considered an especially important parameter as it governs the magnitude of the response at the natural frequencies. Violation of the stationary white noise excitation requirement of classical OMA algorithms has troubled the identification of op…
▽ More
Operational Modal Analysis (OMA) provides essential insights into the structural dynamics of an Offshore Wind Turbine (OWT). In these dynamics, damping is considered an especially important parameter as it governs the magnitude of the response at the natural frequencies. Violation of the stationary white noise excitation requirement of classical OMA algorithms has troubled the identification of operational OWTs due to harmonic excitation caused by rotor rotation. Recently, a novel algorithm was presented that mitigates harmonics by estimating a harmonic subsignal using a Kalman filter and orthogonally removing this signal from the response signal, after which the Stochastic Subspace Identification algorithm is used to identify the system. In this paper, the algorithm is tested on field data obtained from a multi-megawatt operational OWT using an economical sensor setup with two accelerometer levels. The first three tower bending modes could be distinguished, and, through the LQ-decomposition used in the algorithm, the identification results could be improved further by concatenating multiple datasets. A comparison against established harmonics-mitigating algorithms, Modified Least-squared Complex Exponential and PolyMAX, was done to validate the results.
△ Less
Submitted 7 September, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Feedforward control for wave disturbance rejection on floating offshore wind turbines
Authors:
Mees Al,
Alessandro Fontanella,
Daan van der Hoek,
Yichao Liu,
Marco Belloli,
Jan-Willem van Wingerden
Abstract:
Floating offshore wind turbines allow wind energy to be harvested in deep waters. However, additional dynamics and structural loads may result when the floating platform is being excited by wind and waves. In this work, the conventional wind turbine controller is complemented with a novel linear feedforward controller based on wave measurements. The objective of the feedforward controller is to at…
▽ More
Floating offshore wind turbines allow wind energy to be harvested in deep waters. However, additional dynamics and structural loads may result when the floating platform is being excited by wind and waves. In this work, the conventional wind turbine controller is complemented with a novel linear feedforward controller based on wave measurements. The objective of the feedforward controller is to attenuate rotor speed variations caused by wave forcing. To design this controller, a linear model is developed that describes the system response to incident waves. The performance of the feedback-feedforward controller is assessed by a high-fidelity numerical tool using the DTU 10MW turbine and the INNWIND.EU TripleSpar platform as references. Simulations in the presence of irregular waves and turbulent wind show that the feedforward controller effectively compensates the wave-induced rotor oscillations. The novel controller is able to reduce the rotor speed variance by 26%. As a result, the remaining rotor speed variance is only 4% higher compared to operation in still water.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Adaptation of Engineering Wake Models using Gaussian Process Regression and High-Fidelity Simulation Data
Authors:
Leif Erik Andersson,
Bart Doekemeijer,
Daan van der Hoek,
Jan-Willem van Wingerden,
Lars Imsland
Abstract:
This article investigates the optimization of yaw control inputs of a nine-turbine wind farm. The wind farm is simulated using the high-fidelity simulator SOWFA. The optimization is performed with a modifier adaptation scheme based on Gaussian processes. Modifier adaptation corrects for the mismatch between plant and model and helps to converge to the actual plan optimum. In the case study the mod…
▽ More
This article investigates the optimization of yaw control inputs of a nine-turbine wind farm. The wind farm is simulated using the high-fidelity simulator SOWFA. The optimization is performed with a modifier adaptation scheme based on Gaussian processes. Modifier adaptation corrects for the mismatch between plant and model and helps to converge to the actual plan optimum. In the case study the modifier adaptation approach is compared with the Bayesian optimization approach. Moreover, the use of two different covariance functions in the Gaussian process regression is discussed. Practical recommendations concerning the data preparation and application of the approach are given. It is shown that both the modifier adaptation and the Bayesian optimization approach can improve the power production with overall smaller yaw misalignments in comparison to the Gaussian wake model.
△ Less
Submitted 30 March, 2020;
originally announced March 2020.
