Showing 1–7 of 7 results for author: Younus, S H

Optimizing Resource Allocation for QoS and Stability in Dynamic VLC-NOMA Networks via MARL

Authors: Aubida A. Al-Hameed, Safwan Hafeedh Younus, Mohamad A. Ahmed, Abdullah Baz

Abstract: Visible Light Communication (VLC) combined with Non-Orthogonal Multiple Access (NOMA) offers a promising solution for dense indoor wireless networks. Yet, managing resources effectively is challenged by VLC network dynamic conditions involving user mobility and light dimming. In addition to satisfying Quality of Service (QoS) and network stability requirements. Traditional resource allocation meth… ▽ More Visible Light Communication (VLC) combined with Non-Orthogonal Multiple Access (NOMA) offers a promising solution for dense indoor wireless networks. Yet, managing resources effectively is challenged by VLC network dynamic conditions involving user mobility and light dimming. In addition to satisfying Quality of Service (QoS) and network stability requirements. Traditional resource allocation methods and simpler RL approaches struggle to jointly optimize QoS and stability under the dynamic conditions of mobile VLC-NOMA networks. This paper presents MARL frameworks tailored to perform complex joint optimization of resource allocation (NOMA power, user scheduling) and network stability (interference, handovers), considering heterogeneous QoS, user mobility, and dimming in VLC-NOMA systems. Our MARL frameworks capture dynamic channel conditions and diverse user QoS , enabling effective joint optimization. In these frameworks, VLC access points (APs) act as intelligent agents, learning to allocate power and schedule users to satisfy diverse requirements while maintaining network stability by managing interference and minimizing disruptive handovers. We conduct a comparative analysis of two key MARL paradigms: 1) Centralized Training with Decentralized Execution (CTDE) and 2) Centralized Training with Centralized Execution (CTCE). Comprehensive simulations validate the effectiveness of both tailored MARL frameworks and demonstrate an ability to handle complex optimization. The results show key trade-offs, as the CTDE approach achieved approximately 16\% higher for High priority (HP) user QoS satisfaction, while the CTCE approach yielded nearly 7 dB higher average SINR and 12\% lower ping-pong handover ratio, offering valuable insights into the performance differences between these paradigms in complex VLC-NOMA network scenarios. △ Less

Submitted 29 August, 2025; v1 submitted 17 May, 2025; originally announced May 2025.

Comments: 17 pages, 11 figures. This paper has been published in IEEE Access

Journal ref: IEEE Access, vol. 13, 2025

Artificial Neural Network for LiDAL Systems

Authors: Aubida A. Al-Hameed, Safwan Hafeedh Younus, Ahmed Taha Hussein, Mohammed T. Alresheedi, Jaafar M. H. Elmirghani

Abstract: In this paper, we introduce an intelligent light detection and localization (LiDAL) system that uses artificial neural networks (ANN). The LiDAL systems of interest are MIMO LiDAL and MISO IMG LiDAL systems. A trained ANN with the LiDAL system of interest is used to distinguish a human (target) from the background obstacles (furniture) in a realistic indoor environment. In the LiDAL systems, the r… ▽ More In this paper, we introduce an intelligent light detection and localization (LiDAL) system that uses artificial neural networks (ANN). The LiDAL systems of interest are MIMO LiDAL and MISO IMG LiDAL systems. A trained ANN with the LiDAL system of interest is used to distinguish a human (target) from the background obstacles (furniture) in a realistic indoor environment. In the LiDAL systems, the received reflected signals in the time domain have different patterns corresponding to the number of targets and their locations in an indoor environment. The indoor environment with background obstacles (furniture) appears as a set of patterns in the time domain when the transmitted optical signals are reflected from objects in LiDAL systems. Hence, a trained neural network that has the ability to classify and recognize the received signal patterns can distinguish the targets from the background obstacles in a realistic environment. The LiDAL systems with ANN are evaluated in a realistic indoor environment through computer simulation. △ Less

Submitted 26 April, 2019; originally announced April 2019.

Comments: arXiv admin note: substantial text overlap with arXiv:1903.09896

LiDAL: Light Detection and Localization

Authors: Aubida A. Al-Hameed, Safwan Hafeedh Younus, Ahmed Taha Hussein, Mohammed T. Alresheedi, Jaafar M. H. Elmirghani

Abstract: In this paper, we present the first indoor light-based detection and localization system that builds on concepts from radio detection and ranging (radar) making use of the expected growth in the use and adoption of visible light communication (VLC), which can provide the infrastructure for our LiDAL system. Our system enables active detection, counting and localization of people, in addition to be… ▽ More In this paper, we present the first indoor light-based detection and localization system that builds on concepts from radio detection and ranging (radar) making use of the expected growth in the use and adoption of visible light communication (VLC), which can provide the infrastructure for our LiDAL system. Our system enables active detection, counting and localization of people, in addition to being fully compatible with existing VLC systems. In order to detect human (targets), LiDAL uses the visible light spectrum, it sends pulses using a VLC transmitter and analyses the reflected signal collected by a photodetector receiver. Although we examine the use of the visible spectrum here, LiDAL can be used in the infrared spectrum and other parts of the light spectrum. We introduce LiDAL with different transmitter-receiver configurations and optimum detectors considering the fluctuation of the received reflected signal from the target in the presence of Gaussian noise. We design an efficient multiple input multiple output (MIMO) LiDAL system with wide field of view (FOV) single photodetector receiver, and also design a multiple input single output (MISO) LiDAL system with an imaging receiver to eliminate the ambiguity in target detection and localization. We develop models for the human body and its reflections and consider the impact of the colour and texture of the cloth used as well as the impact of target mobility. A number of detection and localization methods are developed for our LiDAL system including cross correaltion, a background subtraction method and a neural network based method. These methods are considered to distinguish a mobile target from the ambient reflections due to background obstacles (furniture) in a realistic indoor environment. △ Less

Submitted 26 April, 2019; v1 submitted 23 March, 2019; originally announced March 2019.

VLC Systems with CGHs

Authors: Safwan Hafeedh Younus, Ahmed Taha Hussein, Mohammed T. Alresheedi, Jaafar M. H. Elmirghani

Abstract: The achievable data rate in indoor wireless systems that employ visible light communication (VLC) can be limited by multipath propagation. Here, we use computer generated holograms (CGHs) in VLC system design to improve the achievable system data rate. The CGHs are utilized to produce a fixed broad beam from the light source, selecting the light source that offers the best performance. The CGHs di… ▽ More The achievable data rate in indoor wireless systems that employ visible light communication (VLC) can be limited by multipath propagation. Here, we use computer generated holograms (CGHs) in VLC system design to improve the achievable system data rate. The CGHs are utilized to produce a fixed broad beam from the light source, selecting the light source that offers the best performance. The CGHs direct this beam to a specific zone on the room's communication floor where the receiver is located. This reduces the effect of diffuse reflections. Consequently, decreasing the intersymbol interference (ISI) and enabling the VLC indoor channel to support higher data rates. We consider two settings to examine our propose VLC system and consider lighting constraints. We evaluate the performance in idealistic and realistic room setting in a diffuse environment with up to second order reflections and also under mobility. The results show that using the CGHs enhances the 3dB bandwidth of the VLC channel and improves the received optical power. △ Less

Submitted 12 November, 2018; originally announced December 2018.

Multi-branch Transmitter for Indoor Visible Light Communication Systems

Authors: Safwan Hafeedh Younus, Aubida A. Al-Hameed, Jaafar M. H. Elmirghani

Abstract: One of the main aims of indoor visible light communication (VLC) systems is to deliver a high data rate service in single user and in multiuser scenarios. A key obstacle is the ability of the indoor VLC channel to support high data rates in the scenarios of interest. Here, we assess the potential of a multi-branch transmitter (MBT) and its use to achieve higher data rates in single user and multiu… ▽ More One of the main aims of indoor visible light communication (VLC) systems is to deliver a high data rate service in single user and in multiuser scenarios. A key obstacle is the ability of the indoor VLC channel to support high data rates in the scenarios of interest. Here, we assess the potential of a multi-branch transmitter (MBT) and its use to achieve higher data rates in single user and multiuser indoor VLC systems. For the single user VLC system, the performance of the MBT is examined with a wide field of view (W-FOV) receiver and an angle diversity receiver (ADR) while for the multiuser VLC system we evaluate the performance of the MBT with a non-imaging angle diversity receiver (NI-ADR). In addition, for the multiuser VLC system, we propose subcarrier multiplexing (SCM) tones to allocate an optimum transmitter to each user. Furthermore, wavelength division multiplexing (WDM) is examined to support higher data rates for each user while using on-off-keying (OOK) modulation. In addition, the impact of the user's mobility on the multi-user VLC system performance is studied. The effect of diffuse reflections, mobility and lighting constraints are taken into account. In addition, the effect of co-channel interference (CCI) is considered in the multiuser VLC system. △ Less

Submitted 17 August, 2019; v1 submitted 12 November, 2018; originally announced December 2018.

WDM for Multi-user Indoor VLC Systems with SCM

Authors: Safwan Hafeedh Younus, Aubida A. Al-Hameed, Ahmed Taha Hussein, Mohammed T. Alresheedi, Jaafar M. H. Elmirghani

Abstract: A system that employs wavelength division multiplexing (WDM) in conjunction with subcarrier multiplexing (SCM) tones is proposed to realize high data rate multi-user indoor visible light communication (VLC). The SCM tones, which are unmodulated signals, are used to identify each light unit, to find the optimum light unit for each user and to calculate the level of the co-channel interference (CCI)… ▽ More A system that employs wavelength division multiplexing (WDM) in conjunction with subcarrier multiplexing (SCM) tones is proposed to realize high data rate multi-user indoor visible light communication (VLC). The SCM tones, which are unmodulated signals, are used to identify each light unit, to find the optimum light unit for each user and to calculate the level of the co-channel interference (CCI). WDM is utilized to attain a high data rate for each user. In this paper, multicolour (four colours) laser diodes (LDs) are utilized as sources of lighting and data communication. One of the WDM colours is used to convey the SCM tones at the beginning of the connection to set up the connection among receivers and light units (to find the optimum light unit for each user). To evaluate the performance of our VLC system, we propose two types of receivers: an array of non-imaging receivers (NI-R) and an array of non-imaging angle diversity receivers (NI-ADR). In this paper, we consider the effects of diffuse reflections, CCI and mobility on the system performance. △ Less

Submitted 4 November, 2018; originally announced November 2018.

Subcarrier Multiplexing for Parallel Data Transmission in Indoor Visible Light Communication Systems

Authors: Safwan Hafeedh Younus, Aubida A. Al-Hameed, Ahmed Taha Hussein, Mohammed T. Alresheedi, Jaafar M. H. Elmirghani

Abstract: This paper presents an indoor visible light communication (VLC) system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to decrease the effects of inter-symbol interference (ISI). To distinguish between light units (transmitters) and to match the light units used to convey the data with the pixels of the imaging receiver, we propose the use of subcarri… ▽ More This paper presents an indoor visible light communication (VLC) system in conjunction with an imaging receiver with parallel data transmission (spatial multiplexing) to decrease the effects of inter-symbol interference (ISI). To distinguish between light units (transmitters) and to match the light units used to convey the data with the pixels of the imaging receiver, we propose the use of subcarrier multiplexing (SCM) tones. Each light unit transmission is multiplexed with a unique tone. At the receiver, a SCM tone decision system is utilized to measure the power level of each SCM tone and consequently associate each pixel with a light unit. In addition, the level of co-channel interference (CCI) between light units is estimated using the SCM tones. Our proposed system is examined in two indoor environments taking into account reflective components (first and second order reflections). The results show that this system has the potential to achieve an aggregate data rate of 8 Gb/s with a bit error rate (BER) of 10-6 for each light unit, using simple on-off-keying (OOK). △ Less

Submitted 4 November, 2018; originally announced November 2018.