-
A novel pedestrian road crossing simulator for dynamic traffic light scheduling systems
Authors:
Dayuan Tan,
Mohamed Younis,
Wassila Lalouani,
Shuyao Fan,
Guozhi Song
Abstract:
The major advances in intelligent transportation systems are pushing societal services toward autonomy where road management is to be more agile in order to cope with changes and continue to yield optimal performance. However, the pedestrian experience is not sufficiently considered. Particularly, signalized intersections are expected to be popular if not dominant in urban settings where pedestria…
▽ More
The major advances in intelligent transportation systems are pushing societal services toward autonomy where road management is to be more agile in order to cope with changes and continue to yield optimal performance. However, the pedestrian experience is not sufficiently considered. Particularly, signalized intersections are expected to be popular if not dominant in urban settings where pedestrian density is high. This paper presents the design of a novel environment for simulating human motion on signalized crosswalks at a fine-grained level. Such a simulation not only captures typical behavior, but also handles cases where large pedestrian groups cross from both directions. The proposed simulator is instrumental for optimized road configuration management where the pedestrians' quality of experience, for example, waiting time, is factored in. The validation results using field data show that an accuracy of 98.37 percent can be obtained for the estimated crossing time. Other results using synthetic data show that our simulator enables optimized traffic light scheduling that diminishes pedestrians' waiting time without sacrificing vehicular throughput.
△ Less
Submitted 17 September, 2024;
originally announced September 2024.
-
Impact of regularization on achieved resolution in 3D tunable structured illumination microscopy (TSIM)
Authors:
Arash Atibi,
Abdulaziz Alqahtani,
Mohammed Younis,
Chrysanthe Preza
Abstract:
We present a study that evaluates the impact of regularization on the achieved resolution in restorations from a novel three-dimensional (3D) Structured Illumination Microscopy (3D-SIM) system with desirable tunability properties. This contribution is the first performance evaluation of the Tunable SIM (TSIM) system through the restoration process. The study quantifies the achieved resolution in r…
▽ More
We present a study that evaluates the impact of regularization on the achieved resolution in restorations from a novel three-dimensional (3D) Structured Illumination Microscopy (3D-SIM) system with desirable tunability properties. This contribution is the first performance evaluation of the Tunable SIM (TSIM) system through the restoration process. The study quantifies the achieved resolution in restorations, from simulated TSIM data of a 3D star-like object, at various expected resolution limits controlled by system parameters, and at different noise levels mitigated by the Generalized Wiener filter, a computationally efficient method, successfully applied to other conventional 3D-SIM systems. We show that theoretical TSIM resolution limits are attained in the absence of noise, while with increasing noise levels, the necessary increase in regularization and residual restoration artifacts contributed to a $\sim$ 5%-10% and a 20% reduction in the axial achieved resolution, in 20-dB and 15-dB data, respectively, which is within the pixel size (20 nm) limitation.
△ Less
Submitted 20 March, 2024;
originally announced March 2024.
-
Vapor Cloud Delayed-DPPM Modulation Technique for nonlinear Optoacoustic Communication
Authors:
Muntasir Mahmud,
Mohamed Younis,
Md Shafiqul Islam,
Fow-Sen Choa,
Gary Carter
Abstract:
The optoacoustic process can solve the longstanding challenge of wireless information transmission from an airborne unit to an underwater node (UWN). The nonlinear optoacoustic signal generated by proper laser parameters can propagate long distances in water. However, forming such a signal requires a high-power laser, and the buildup of a vapor cloud precludes the subsequent acoustic signal genera…
▽ More
The optoacoustic process can solve the longstanding challenge of wireless information transmission from an airborne unit to an underwater node (UWN). The nonlinear optoacoustic signal generated by proper laser parameters can propagate long distances in water. However, forming such a signal requires a high-power laser, and the buildup of a vapor cloud precludes the subsequent acoustic signal generation. Therefore, pursuing the traditional on-off keying (OOK) modulation technique will limit the data rate and power efficiency. In this paper, we analyze different modulation techniques and propose a vapor cloud delayed-differential pulse position modulation (VCD-DPPM) technique to improve the data rate and achieve high power efficiency for a single stationary laser transmitter. The symbol rate of VCD-DPPM is approximately 6.9 times and 1.69 times higher than OOK in our text communication simulation using a laser repetition rate of 10 kHz and 40 Hz, respectively. Furthermore, VCD-DPPM is 137% more power efficient than the OOK technique for both cases. We have generated different acoustic signal levels in laboratory conditions and simulated the bit error rate (BER) for different depths and positions of the UWN, while considering ambient underwater noises. Our results indicate that VCD-DPPM enables efficient data transmission.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Underwater Node Localization using Optoacoustic Signals
Authors:
Muntasir Mahmud,
Mohamed Younis,
Gary Carter,
Fow-Sen Choa
Abstract:
Localization of underwater networks is important in many military and civil applications. Because GPS receivers do not work below the water surface, traditional localization methods form a relative topology of underwater nodes (UWNs) and utilize either anchor nodes or floating gateways with dual transceivers in order to determine global coordinates. However, these methods introduce logistical comp…
▽ More
Localization of underwater networks is important in many military and civil applications. Because GPS receivers do not work below the water surface, traditional localization methods form a relative topology of underwater nodes (UWNs) and utilize either anchor nodes or floating gateways with dual transceivers in order to determine global coordinates. However, these methods introduce logistical complications and security risks in deploying the anchor and/or surface gateways. This paper tackles such an issue by proposing new localization techniques which can remotely localize UWNs using optoacoustic signals. In our approach, GPS coordinates are transmitted from air to the UWN via creating an underwater temporary isotropic acoustic transmitter with the optoacoustic process. We analyze the process of controlling the shape and size of the plasma to create the isotropic acoustic transmitter and experimentally validate the generation of isotropic acoustic signals. Then two methods of localization are proposed for static and dynamic UWNs. Finally, the simulation results with experimental values show the effectiveness of our approach. Comparing to the traditional techniques, our approach achieves the same accuracy without using any surface or underwater anchor nodes.
△ Less
Submitted 20 January, 2022;
originally announced January 2022.
-
Classification of Chest Diseases using Wavelet Transforms and Transfer Learning
Authors:
Ahmed Rasheed,
Muhammad Shahzad Younis,
Muhammad Bilal,
Maha Rasheed
Abstract:
Chest X-ray scan is a most often used modality by radiologists to diagnose many chest related diseases in their initial stages. The proposed system aids the radiologists in making decision about the diseases found in the scans more efficiently. Our system combines the techniques of image processing for feature enhancement and deep learning for classification among diseases. We have used the ChestX…
▽ More
Chest X-ray scan is a most often used modality by radiologists to diagnose many chest related diseases in their initial stages. The proposed system aids the radiologists in making decision about the diseases found in the scans more efficiently. Our system combines the techniques of image processing for feature enhancement and deep learning for classification among diseases. We have used the ChestX-ray14 database in order to train our deep learning model on the 14 different labeled diseases found in it. The proposed research shows the significant improvement in the results by using wavelet transforms as pre-processing technique.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.