-
Mechanism Design Optimization through CAD-Based Bayesian Optimization and Quantified Constraints
Authors:
Abdelmajid Ben Yahya,
Santiago Ramos Garces,
Nick Van Oosterwyck,
Annie Cuyt,
Stijn Derammelaere
Abstract:
This research delves into optimizing mechanism design, with an emphasis on the energy efficiency and the expansive design possibilities of reciprocating mechanisms. It investigates how to efficiently integrate Computer-Aided Design (CAD) simulations with Bayesian Optimization (BO) and a constrained design space, aiming to enhance the design optimization process beyond the confines of traditional k…
▽ More
This research delves into optimizing mechanism design, with an emphasis on the energy efficiency and the expansive design possibilities of reciprocating mechanisms. It investigates how to efficiently integrate Computer-Aided Design (CAD) simulations with Bayesian Optimization (BO) and a constrained design space, aiming to enhance the design optimization process beyond the confines of traditional kinematic and dynamic analysis. The study sets out to create a novel optimization framework that merges CAD simulations with a BO strategy. Initially, the feasibility of a mechanism design is assessed through CAD-motion simulations, which gauge its practicality. Upon deeming a design feasible, an evaluation via CAD-motion simulations is conducted to ascertain the objective value. This research proposes utilizing non-parametric Gaussian processes for crafting a surrogate model of the objective function, considering the design space's static and dynamic constraints. The findings reveal that the introduced CAD-based Bayesian Optimization framework adeptly identifies optimal design parameters that minimize root mean square (RMS) torque while complying with predetermined constraints. This method markedly diminishes the complexity seen in analytical approaches, rendering it adaptable to intricate mechanisms and practicable for machine builders. The framework evidences the utility of integrating constraints in the optimization process, showing promise for attaining globally optimal designs efficiently. A case study on an emergency ventilator, with three design parameters, demonstrates a 71% RMS torque reduction after 255 CAD-based evaluations, underscoring the approach's effectiveness and its potential for refining mechanism design optimization.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
An Industrial Applicable Approach towards Design Optimization of a Mechanism: a Coronaventilator Case Study
Authors:
Abdelmajid Ben Yahya,
Nick Van Oosterwyck,
Jan Herregodts,
Stijn Herregodts,
Simon Houwen,
Bart Vanwalleghem,
Stijn Derammelaere
Abstract:
Design optimization of mechanisms is a promising research area as it results in more energy-efficient machines without compromising performance. However, machine builders do not actually use the potential described in the literature as these methods require too much theoretical analysis.
This paper introduces a convenient optimization workflow allowing wide industrial adoption, by using CAD mode…
▽ More
Design optimization of mechanisms is a promising research area as it results in more energy-efficient machines without compromising performance. However, machine builders do not actually use the potential described in the literature as these methods require too much theoretical analysis.
This paper introduces a convenient optimization workflow allowing wide industrial adoption, by using CAD models. The 3D multi-body software is used to perform motion simulations, from which the objective value samples can be extracted. These motion simulations determine the required torque for a certain combination of design parameters to fulfill the movement. Dedicated software can execute multiple motion simulations sequentially and interchange data between the different simulations, which automates the process of retrieving objective value samples. Therefore, without in-depth analytical design analysis, a machine designer can evaluate multiple designs at low cost. Moreover, by implementing an optimization algorithm, an optimal design can be found that meets the objective. In a case study of a coronaventilator mechanism with three design parameters (DP's), 39 CAD motion simulations allowed to reduce the RMS torque of the mechanism by 57.2% in 42 minutes.
△ Less
Submitted 29 July, 2022;
originally announced July 2022.
-
Bode-based speed Proportional Integral and notch filter tuning of a Permanent Magnet Synchronous Machine driven flexible system
Authors:
Santiago Ramos Garces,
Abdelmajid Ben Yahya,
Nick van Oosterwyck,
Dries Jacques,
Stijn Derammelaere
Abstract:
A resonance and an antiresonance peak characterize many industrial mechanisms dynamics driven by a Permanent Magnet Synchronous Motor (PMSM). The presence of the resonance peak can lead to vibrations and instability of the system. On that account, advanced methods exist to tune the speed Proportional Integral (PI) controller based on adaptive or fuzzy theory. However, those methods require experti…
▽ More
A resonance and an antiresonance peak characterize many industrial mechanisms dynamics driven by a Permanent Magnet Synchronous Motor (PMSM). The presence of the resonance peak can lead to vibrations and instability of the system. On that account, advanced methods exist to tune the speed Proportional Integral (PI) controller based on adaptive or fuzzy theory. However, those methods require expertise in control theory and are not available in commercial drives. For that, this paper proposes a Bode-based method for PI parameters selection in combination with a notch filter that can be easily set in any industrial drive. The proposed method is compared with conventional tuning methods in a physical setup.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
CAD Based Design Optimization of Four-bar Mechanisms: a coronaventilator case study
Authors:
Abdelmajid Ben Yahya,
Nick Van Oosterwyck,
Ferre Knaepkens,
Simon Houwen,
Stijn Herregodts,
Jan Herregodts,
Bart Vanwalleghem,
Annie Cuyt,
Stijn Derammelaere
Abstract:
Design optimization of mechanisms is a promising research area as it results in more energy-efficient machines without compromising performance. However, machine builders do not actually use the design methods described in the literature as these algorithms require too much theoretical analysis. Moreover, the design synthesis approaches in the literature predominantly utilize heuristic optimizers…
▽ More
Design optimization of mechanisms is a promising research area as it results in more energy-efficient machines without compromising performance. However, machine builders do not actually use the design methods described in the literature as these algorithms require too much theoretical analysis. Moreover, the design synthesis approaches in the literature predominantly utilize heuristic optimizers leading to suboptimal local minima.
This research introduces a convenient optimization workflow allowing wide industrial adoption, while guaranteeing to reveal the global optimum. To guarantee that we find the global optimum, a mathematical expression of the constraints describing the feasible region of possible designs is of great importance. Therefore, kinematic analysis of the point-to-point (PTP) planar four-bar mechanism is discussed to obtain the static and dynamic constraints. Within the feasible region, objective value samples are generated through CAD multi-body software. These motion simulations determine the required torque to fulfill the movement for a certain combination of design parameters. Sparse interpolation techniques allow minimizing the required amount of samples and thus CAD simulations. Moreover, this interpolation of simulation results enables the representation of the objective in a mathematical description without in-depth analytical design analysis by the machine designer. Subsequently, the mathematical expression of the objective allows global optimizers to find a global optimal design within the feasible design space. In a case study of a coronaventilator mechanism with three design parameters (DP's), 1870 CAD motion simulations from which only 618 are used to build a model allowed to reduce the RMS torque of the mechanism by 67%.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
