-
Self-Calibrating Position Measurements: Applied to Imperfect Hall Sensors
Authors:
Max van Meer,
Marijn van Noije,
Koen Tiels,
Enzo Evers,
Lennart Blanken,
Gert Witvoet,
Tom Oomen
Abstract:
Linear Hall sensors are a cost-effective alternative to optical encoders for measuring the rotor positions of actuators, with the main challenge being that they exhibit position-dependent inaccuracies resulting from manufacturing tolerances. This paper develops a data-driven calibration procedure for linear analog Hall sensors that enables accurate online estimates of the rotor angle without requi…
▽ More
Linear Hall sensors are a cost-effective alternative to optical encoders for measuring the rotor positions of actuators, with the main challenge being that they exhibit position-dependent inaccuracies resulting from manufacturing tolerances. This paper develops a data-driven calibration procedure for linear analog Hall sensors that enables accurate online estimates of the rotor angle without requiring expensive external encoders. The approach combines closed-loop data collection with nonlinear identification to obtain an accurate model of the sensor inaccuracies, which is subsequently used for online compensation. Simulation results show that when the flux density model structure is known, measurement errors are reduced to the sensor noise floor, and experiments on an industrial setup demonstrate a factor of 2.6 reduction in the root-mean-square measurement error. These results confirm that Hall sensor inaccuracies can be calibrated even when no external encoder is available, improving their practical applicability.
△ Less
Submitted 7 May, 2025;
originally announced May 2025.
-
GraFIT: A toolbox for fast and accurate frequency response identification in Gravitational Wave Detectors
Authors:
Mathyn van Dael,
Max van Haren,
Gert Witvoet,
Bas Swinkels,
Tom Oomen
Abstract:
Frequency response function (FRF) measurements are widely used in Gravitational Wave (GW) detectors, e.g., for the design of controllers, calibrating signals and diagnostic problems with system dynamics. The aim of this paper is to present GraFIT: a toolbox that enables fast, inexpensive, and accurate identification of FRF measurements for GW detectors compared to the commonly used approaches, inc…
▽ More
Frequency response function (FRF) measurements are widely used in Gravitational Wave (GW) detectors, e.g., for the design of controllers, calibrating signals and diagnostic problems with system dynamics. The aim of this paper is to present GraFIT: a toolbox that enables fast, inexpensive, and accurate identification of FRF measurements for GW detectors compared to the commonly used approaches, including common spectral analysis techniques. The toolbox consists of a single function to estimate the frequency response function for both open-loop and closed-loop systems and for arbitrary input and output dimensions. The toolbox is validated on two experimental case studies of the Virgo detector, illustrating more than a factor 3 reduction in standard deviation of the estimate for the same measurement times, and comparable standard deviations with up to 10 times less data for the new method with respect to the currently implemented Spectral Analysis method.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Compensating Hysteresis and Mechanical Misalignment in Piezo-Stepper Actuators
Authors:
Max van Meer,
Tim van Meijel,
Emile van Halsema,
Edwin Verschueren,
Gert Witvoet,
Tom Oomen
Abstract:
Piezo-stepper actuators enable accurate positioning through the sequential contraction and expansion of piezoelectric elements, generating a walking motion. The aim of this paper is to reduce velocity ripples caused by parasitic effects, due to hysteresis in the piezoelectric material and mechanical misalignments, through suitable feedforward control. The presented approach involves the integratio…
▽ More
Piezo-stepper actuators enable accurate positioning through the sequential contraction and expansion of piezoelectric elements, generating a walking motion. The aim of this paper is to reduce velocity ripples caused by parasitic effects, due to hysteresis in the piezoelectric material and mechanical misalignments, through suitable feedforward control. The presented approach involves the integration of a rate-dependent hysteresis model with a position-dependent feedforward learning scheme to compensate for these effects. Experimental results show that this approach leads to a significant reduction in the velocity ripples, even when the target velocity is changed. These results enable the use of piezo-stepper actuators in applications requiring high positioning accuracy and stiffness over a long stroke, without requiring expensive position sensors for high-gain feedback.
△ Less
Submitted 17 March, 2025;
originally announced March 2025.
-
Robust Commutation Design: Applied to Switched Reluctance Motors
Authors:
Max van Meer,
Gert Witvoet,
Tom Oomen
Abstract:
Switched Reluctance Motors (SRMs) are cost-effective electric actuators that utilize magnetic reluctance to generate torque, with torque ripple arising from unaccounted manufacturing defects in the rotor tooth geometry. This paper aims to design a versatile, resource-efficient commutation function for accurate control of a range of SRMs, mitigating torque ripple despite manufacturing variations ac…
▽ More
Switched Reluctance Motors (SRMs) are cost-effective electric actuators that utilize magnetic reluctance to generate torque, with torque ripple arising from unaccounted manufacturing defects in the rotor tooth geometry. This paper aims to design a versatile, resource-efficient commutation function for accurate control of a range of SRMs, mitigating torque ripple despite manufacturing variations across SRMs and individual rotor teeth. The developed commutation function optimally distributes current between coils by leveraging the variance in the torque-current-angle model and is designed with few parameters for easy integration on affordable hardware. Monte Carlo simulations and experimental results show a tracking error reduction of up to 31% and 11%, respectively. The developed approach is beneficial for applications using a single driver for multiple systems and those constrained by memory or modeling effort, providing an economical solution for improved tracking performance and reduced acoustic noise.
△ Less
Submitted 27 March, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Nonlinear Bayesian Identification for Motor Commutation: Applied to Switched Reluctance Motors
Authors:
Max van Meer,
Rodrigo A. González,
Gert Witvoet,
Tom Oomen
Abstract:
Switched Reluctance Motors (SRMs) enable power-efficient actuation with mechanically simple designs. This paper aims to identify the nonlinear relationship between torque, rotor angle, and currents, to design commutation functions that minimize torque ripple in SRMs. This is achieved by conducting specific closed-loop experiments using purposely imperfect commutation functions and identifying the…
▽ More
Switched Reluctance Motors (SRMs) enable power-efficient actuation with mechanically simple designs. This paper aims to identify the nonlinear relationship between torque, rotor angle, and currents, to design commutation functions that minimize torque ripple in SRMs. This is achieved by conducting specific closed-loop experiments using purposely imperfect commutation functions and identifying the nonlinear dynamics via Bayesian estimation. A simulation example shows that the presented method is robust to position-dependent disturbances, and experiments suggest that the identification method enables the design of commutation functions that significantly increase performance. The developed approach enables accurate identification of the torque-current-angle relationship in SRMs, without the need for torque sensors, an accurate linear model, or an accurate model of position-dependent disturbances, making it easy to implement in production.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Cascaded Calibration of Mechatronic Systems via Bayesian Inference
Authors:
Max van Meer,
Emre Deniz,
Gert Witvoet,
Tom Oomen
Abstract:
Sensors in high-precision mechatronic systems require accurate calibration, which is achieved using test beds that, in turn, require even more accurate calibration. The aim of this paper is to develop a cascaded calibration method for position sensors of mechatronic systems while taking into account the variance of the calibration model of the test bed. The developed calibration method employs Gau…
▽ More
Sensors in high-precision mechatronic systems require accurate calibration, which is achieved using test beds that, in turn, require even more accurate calibration. The aim of this paper is to develop a cascaded calibration method for position sensors of mechatronic systems while taking into account the variance of the calibration model of the test bed. The developed calibration method employs Gaussian Process regression to obtain a model of the position-dependent sensor inaccuracies by combining prior knowledge of the sensor with data using Bayesian inference. Monte Carlo simulations show that the developed calibration approach leads to significantly higher calibration accuracy when compared to alternative regression techniques, especially when the number of available calibration points is limited. The results indicate that more accurate calibration of position sensors is possible with fewer resources.
△ Less
Submitted 6 April, 2023;
originally announced April 2023.
-
Optimal Commutation for Switched Reluctance Motors using Gaussian Process Regression
Authors:
Max van Meer,
Gert Witvoet,
Tom Oomen
Abstract:
Switched reluctance motors are appealing because they are inexpensive in both construction and maintenance. The aim of this paper is to develop a commutation function that linearizes the nonlinear motor dynamics in such a way that the torque ripple is reduced. To this end, a convex optimization problem is posed that directly penalizes torque ripple in between samples, as well as power consumption,…
▽ More
Switched reluctance motors are appealing because they are inexpensive in both construction and maintenance. The aim of this paper is to develop a commutation function that linearizes the nonlinear motor dynamics in such a way that the torque ripple is reduced. To this end, a convex optimization problem is posed that directly penalizes torque ripple in between samples, as well as power consumption, and Gaussian Process regression is used to obtain a continuous commutation function. The resulting function is fundamentally different from conventional commutation functions, and closed-loop simulations show significant reduction of the error. The results offer a new perspective on suitable commutation functions for accurate control of reluctance motors.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Gaussian Process Repetitive Control for Suppressing Spatial Disturbances
Authors:
Noud Mooren,
Gert Witvoet,
Tom Oomen
Abstract:
Motion systems are often subject to disturbances such as cogging, commutation errors, and imbalances, that vary with velocity and appear periodic in time for constant operating velocities. The aim of this paper is to develop a repetitive controller (RC) for disturbances that are not periodic in the time domain, yet occur due to an identical position-domain disturbance. A new spatial RC framework i…
▽ More
Motion systems are often subject to disturbances such as cogging, commutation errors, and imbalances, that vary with velocity and appear periodic in time for constant operating velocities. The aim of this paper is to develop a repetitive controller (RC) for disturbances that are not periodic in the time domain, yet occur due to an identical position-domain disturbance. A new spatial RC framework is developed, allowing to attenuate disturbances that are periodic in the position domain but manifest a-periodic in the time domain. A Gaussian process (GP) based memory is employed with a suitable periodic kernel that can effectively deal with the intermittent observations inherent to the position domain. A mechatronic example confirms the potential of the method.
△ Less
Submitted 30 June, 2020;
originally announced June 2020.
