-
Low voltage user phase reconfiguration as a planning problem
Authors:
Sari Kerckhove,
Marta Vanin,
Reinhilde D'hulst,
Dirk Van Hertem
Abstract:
Considerable levels of phase imbalance in low voltage (LV) distribution networks imply that grid assets are suboptimally utilized and can cause additional losses, equipment failure and degradation. With the ongoing energy transition, the installation of additional single-phase distributed energy resources may further increase the phase imbalance if no countermeasures are taken.
Phase reconfigura…
▽ More
Considerable levels of phase imbalance in low voltage (LV) distribution networks imply that grid assets are suboptimally utilized and can cause additional losses, equipment failure and degradation. With the ongoing energy transition, the installation of additional single-phase distributed energy resources may further increase the phase imbalance if no countermeasures are taken.
Phase reconfiguration is a cost-effective solution to reduce imbalance. However, dynamic reconfiguration, through real-time phase swapping of loads using remotely controlled switches, is often impractical because these switches are too costly for widespread installation at LV users. Approaching phase reconfiguration as a planning problem, i.e. static reconfiguration, is an underaddressed but promising alternative. Effective static approaches that allow appropriate imbalance objectives are currently lacking.
This paper presents reliable and expressive static phase reconfiguration methods that grid operators can easily integrate into routine maintenance for effective phase balancing.
We present and compare three static methods, an exact mixed-integer nonlinear formulation (MINLP), a mixed-integer quadratic approximation (MIQP), and a genetic algorithm (GA), each supporting different imbalance objectives. The MIQP approach, despite using proxy objectives, efficiently mitigates the different types of imbalance considered, and outperforms both MINLP and GA in scalability and consistency.
△ Less
Submitted 8 July, 2025;
originally announced July 2025.
-
Distribution System State and Impedance Estimation Augmented with Carson's Equations
Authors:
Marta Vanin,
Frederik Geth,
Rahmat Heidari,
Dirk Van Hertem
Abstract:
The impedances of cables and lines used in (multi-conductor) distribution networks are usually unknown or approximated, and may lead to problematic results for any physics-based power system calculation, e.g., (optimal) power flow. Learning parameters from time series data is one of the few available options to obtain improved impedance models. This paper presents an approach that combines statist…
▽ More
The impedances of cables and lines used in (multi-conductor) distribution networks are usually unknown or approximated, and may lead to problematic results for any physics-based power system calculation, e.g., (optimal) power flow. Learning parameters from time series data is one of the few available options to obtain improved impedance models. This paper presents an approach that combines statistical learning concepts with the exploitation of domain knowledge, in the form of Carson's equations, through nonlinear mathematical optimization. The proposed approach derives impedance matrices for up-to-four-wire systems, using measurement data like those obtained from smart meters. Despite the lack of phasor measurements, the low signal-to-noise ratio of smart meter measurements, and the inherent existence of multiple equivalent solutions, our method produces good quality impedance models that are fit for power system calculations, significantly improving on our previous work both in terms of accuracy and computational time.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
-
Review, Definition and Challenges of Electrical Energy Hubs
Authors:
Giacomo Bastianel,
Jan Kircheis,
Merijn Van Deyck,
Dongyeong Lee,
Geraint Chaffey,
Marta Vanin,
Hakan Ergun,
Jef Beerten,
Dirk Van Hertem
Abstract:
To transition towards a carbon-neutral power system, considerable amounts of renewable energy generation capacity are being installed in the North Sea area. Consequently, projects aggregating many gigawatts of power generation capacity and transmitting renewable energy to the main load centers are being developed. Given the electrical challenges arising from having bulk power capacity in a compact…
▽ More
To transition towards a carbon-neutral power system, considerable amounts of renewable energy generation capacity are being installed in the North Sea area. Consequently, projects aggregating many gigawatts of power generation capacity and transmitting renewable energy to the main load centers are being developed. Given the electrical challenges arising from having bulk power capacity in a compact geographical area with several connections to the main grid, and a lack of a robust definition identifying the type of system under study, this paper proposes a general technical definition of such projects introducing the term Electrical Energy Hub (EEH). The concept, purpose, and functionalities of EEHs are introduced in the text, emphasizing the importance of a clear technical definition for future planning procedures, grid codes, regulations, and support schemes for EEHs and multiterminal HVDC (MTDC) grids in general. Furthermore, the unique electrical challenges associated with integrating EEHs into the power system are discussed. Three research areas of concern are identified, namely control, planning, and protection. Through this analysis, insights are provided into the effective implementation of multi-GW scale EEH projects and their integration into the power grid through multiple interconnections. Finally, a list of ongoing and planned grid development projects is evaluated to assess whether they fall within the EEH category
△ Less
Submitted 8 April, 2025;
originally announced April 2025.
-
Optimal Transmission Switching and Busbar Splitting in Hybrid AC/DC Grids
Authors:
Giacomo Bastianel,
Marta Vanin,
Dirk Van Hertem,
Hakan Ergun
Abstract:
Driven by global climate goals, an increasing amount of Renewable Energy Sources (RES) is currently being installed worldwide. Especially in the context of offshore wind integration, hybrid AC/DC grids are considered to be the most effective technology to transmit this RES power over long distances. As hybrid AC/DC systems develop, they are expected to become increasingly complex and meshed as the…
▽ More
Driven by global climate goals, an increasing amount of Renewable Energy Sources (RES) is currently being installed worldwide. Especially in the context of offshore wind integration, hybrid AC/DC grids are considered to be the most effective technology to transmit this RES power over long distances. As hybrid AC/DC systems develop, they are expected to become increasingly complex and meshed as the current AC system. Nevertheless, there is still limited literature on how to optimize hybrid AC/DC topologies while minimizing the total power generation cost. For this reason, this paper proposes a methodology to optimize the steady-state switching states of transmission lines and busbar configurations in hybrid AC/DC grids. The proposed optimization model includes optimal transmission switching (OTS) and busbar splitting (BS), which can be applied to both AC and DC parts of hybrid AC/DC grids. To solve the problem, a scalable and exact nonlinear, non-convex model using a big M approach is formulated. In addition, convex relaxations and linear approximations of the model are tested, and their accuracy, feasibility, and optimality are analyzed. The numerical experiments show that a solution to the combined OTS/BS problem can be found in acceptable computation time and that the investigated relaxations and linearisations provide AC feasible results.
△ Less
Submitted 29 November, 2024;
originally announced December 2024.
-
Smart Energy Network Digital Twins: Findings from a UK-Based Demonstrator Project
Authors:
Matthew Deakin,
Marta Vanin,
Zhong Fan,
Dirk Van Hertem
Abstract:
Digital Twins promise to deliver a step-change in distribution system operations and planning, but there are few real-world examples that explore the challenges of combining imperfect model and measurement data, and then use these as the basis for subsequent analysis. In this work we propose a Digital Twin framework for electrical distribution systems and implement that framework on the Smart Ener…
▽ More
Digital Twins promise to deliver a step-change in distribution system operations and planning, but there are few real-world examples that explore the challenges of combining imperfect model and measurement data, and then use these as the basis for subsequent analysis. In this work we propose a Digital Twin framework for electrical distribution systems and implement that framework on the Smart Energy Network Demonstrator microgrid in the UK. The data and software implementation are made available open-source, and consist of a network model, power meter measurements, and unbalanced power flow-based algorithms. Measurement and network uncertainties are shown to have a substantial impact on the quality of Digital Twin outputs. The potential benefits of a dynamic export limit and voltage control are estimated using the Digital Twin, using simulated measurements to address data quality challenges, with results showing curtailment for an exemplar day could be reduced by 56%. Power meter data and a network model are shown to be necessary for developing algorithms that enable decision-making that is robust to real-world uncertainties, with possibilities and challenges of Digital Twin development clearly demonstrated.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Data quality challenges in existing distribution network datasets
Authors:
Frederik Geth,
Marta Vanin,
Dirk Van Hertem
Abstract:
Existing digital distribution network models, like those in the databases of network utilities, are known to contain erroneous or untrustworthy information. This can compromise the effectiveness of physics-based engineering simulations and technologies, in particular those that are needed to deliver the energy transition. The large-scale rollout of smart meters presents new opportunities for data-…
▽ More
Existing digital distribution network models, like those in the databases of network utilities, are known to contain erroneous or untrustworthy information. This can compromise the effectiveness of physics-based engineering simulations and technologies, in particular those that are needed to deliver the energy transition. The large-scale rollout of smart meters presents new opportunities for data-driven system identification in distribution networks, enabling the improvement of existing data sets. Despite the increasing academic attention to system identification for distribution networks, researchers often make troublesome assumptions on what data is available and/or trustworthy. In this paper, we highlight some differences between academic efforts and first-hand industrial experiences, in order to steer the former towards more applicable research solutions.
△ Less
Submitted 1 August, 2023;
originally announced August 2023.
-
Exact Modeling of Non-Gaussian Measurement Uncertainty in Distribution System State Estimation
Authors:
Marta Vanin,
Tom Van Acker,
Reinhilde D'hulst,
Dirk Van Hertem
Abstract:
State estimation allows to monitor power networks, exploiting field measurements to derive the most likely grid state. In the literature, measurement errors are usually assumed to follow zero-mean Gaussian distributions; however, it has been shown that this assumption often does not hold. One such example is when considering pseudo-measurements. In distribution networks, a significant amount of ps…
▽ More
State estimation allows to monitor power networks, exploiting field measurements to derive the most likely grid state. In the literature, measurement errors are usually assumed to follow zero-mean Gaussian distributions; however, it has been shown that this assumption often does not hold. One such example is when considering pseudo-measurements. In distribution networks, a significant amount of pseudo-measurements might be necessary, due to the scarcity of real-time measurements. In this paper, a state estimator is presented which allows to model measurement uncertainty with any continuous distribution, without approximations. This becomes possible by writing state estimation as a general maximum-likelihood estimation-based constrained optimization problem. To realistically describe distribution networks, three-phase unbalanced power flow equations are used. Results are presented that illustrate the differences in accuracy and computational effort between different uncertainty modeling methods, for the IEEE European Low Voltage Test Feeder.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Combined Unbalanced Distribution System State and Line Impedance Matrix Estimation
Authors:
Marta Vanin,
Frederik Geth,
Reinhilde D'hulst,
Dirk Van Hertem
Abstract:
To address the challenges that the decarbonization of the energy sector is bringing about, advanced distribution network management and operation strategies are being developed. Many of these strategies require accurate network models to work effectively. However, distribution network data are known to contain errors, and attention has been given to techniques that allow to derive improved network…
▽ More
To address the challenges that the decarbonization of the energy sector is bringing about, advanced distribution network management and operation strategies are being developed. Many of these strategies require accurate network models to work effectively. However, distribution network data are known to contain errors, and attention has been given to techniques that allow to derive improved network information. This paper presents a novel method to derive line impedance values from smart meter measurement time series, with realistic assumptions in terms of meter accuracy, resolution and penetration. The method is based on unbalanced state estimation and is cast as a non-convex quadratically constrained optimization problem. Both line lengths and impedance matrix models can be estimated based on an exact nonlinear formulation of the steady-state three-phase network physics. The method is evaluated on the IEEE European Low Voltage feeder (906 buses) and shows promising results.
△ Less
Submitted 31 March, 2023; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Phase Identification of Distribution System Users Through a MILP Extension of State Estimation
Authors:
Marta Vanin,
Tom Van Acker,
Reinhilde D'hulst,
Dirk Van Hertem
Abstract:
To address the challenges and exploit the opportunities that the decarbonization of the energy sector is bringing about, advanced distribution network management and operation strategies are being developed. Many of these require accurate network models to work effectively, including user phase connectivity. However, such information is often not available. This paper proposes a novel method to id…
▽ More
To address the challenges and exploit the opportunities that the decarbonization of the energy sector is bringing about, advanced distribution network management and operation strategies are being developed. Many of these require accurate network models to work effectively, including user phase connectivity. However, such information is often not available. This paper proposes a novel method to identify the phase connectivity of single- and three-phase distribution consumers using smart meter measurements. The method is based on state estimation and mixed-integer linear programming, and requires shorter measurement collection times compared to statistical and machine learning-based techniques, for the same level of accuracy. Consequently, the duration of measurement efforts/campaigns aimed at obtaining this type of information reduces, accelerating the system knowledge acquisition process and potentially reducing the campaigns' costs. A technique is illustrated that allows to solve large networks in acceptable time despite the considerable number of integer variables. Extensive computational results are presented for publicly available low voltage feeders.
△ Less
Submitted 31 March, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Congestion Mitigation in Unbalanced Residential Networks with OPF-based Demand Management
Authors:
Marta Vanin,
Tom Van Acker,
Hakan Ergun,
Reinhilde D'hulst,
Koen Vanthournout,
Dirk Van Hertem
Abstract:
This paper proposes a novel congestion mitigation strategy for low voltage residential feeders in which the rising power demand due to the electrification of the transport and heating systems leads to congestion problems. The strategy is based on requiring residential customers to limit their demand for a certain amount of time in exchange for economic benefits.
The main novelty of the method co…
▽ More
This paper proposes a novel congestion mitigation strategy for low voltage residential feeders in which the rising power demand due to the electrification of the transport and heating systems leads to congestion problems. The strategy is based on requiring residential customers to limit their demand for a certain amount of time in exchange for economic benefits.
The main novelty of the method consists of combining a thorough representation of the network physics with advanced constraints that ensure the comfort of residential users, in a scalable manner that suits real systems. The mitigation strategy is presented from a DSO perspective, and takes the form of contracts between users and system operator. The focus on user comfort aims to make the contracts appealing, encouraging users to voluntarily enroll in the proposed mitigation scheme.
The presented solution is implemented as a mixed-integer multi-period optimal power flow problem which relies on a linearized three-phase power flow formulation. Calculations on 100 real-life distribution feeders are performed, to analyze the congestion-relieving potential of several possible system operator-user contracts. From a planning perspective, the results can help the system operator define contractual terms that make a specific congestion mitigation scheme effective and viable. From an operational perspective, the same calculations can be used to optimally schedule power reduction on a day-ahead basis.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Low Voltage Customer Phase Identification Methods Based on Smart Meter Data
Authors:
Alexander Hoogsteyn,
Marta Vanin,
Arpan Koirala,
Dirk Van Hertem
Abstract:
The increased deployment of distributed energy generation and the integration of new, large electric loads such as electric vehicles and heat pumps challenge the correct and reliable operation of low voltage distribution systems. To tackle potential problems, active management solutions are proposed in the literature, which require distribution system models that include the phase connectivity of…
▽ More
The increased deployment of distributed energy generation and the integration of new, large electric loads such as electric vehicles and heat pumps challenge the correct and reliable operation of low voltage distribution systems. To tackle potential problems, active management solutions are proposed in the literature, which require distribution system models that include the phase connectivity of all the consumers in the network. However, information on the phase connectivity is in practice often unavailable. In this work, several voltage and power measurement-based phase identification methods from the literature are implemented. A consistent comparison of the methods is made across different smart meter accuracy classes and smart meter penetration levels using publicly available data. Furthermore, a novel method is proposed that makes use of ensemble learning and that can combine data from different measurement campaigns. The results indicate that generally better results are obtained with voltage data compared to power data from smart meters of the same accuracy class. If power data is available too, the novel ensemble method can improve the accuracy of the phase identification obtained from voltage data alone.
△ Less
Submitted 13 April, 2022;
originally announced April 2022.
-
A framework for constrained static state estimation in unbalanced distribution networks
Authors:
Marta Vanin,
Tom Van Acker,
Reinhilde D'hulst,
Dirk Van Hertem
Abstract:
State estimation plays a key role in the transition from the passive to the active operation of distribution systems, as it allows to monitor these networks and, successively, to perform control actions. However, designing state estimators for distribution systems carries a significant amount of challenges. This is due to the physical complexity of the networks, e.g., phase unbalance, and limited…
▽ More
State estimation plays a key role in the transition from the passive to the active operation of distribution systems, as it allows to monitor these networks and, successively, to perform control actions. However, designing state estimators for distribution systems carries a significant amount of challenges. This is due to the physical complexity of the networks, e.g., phase unbalance, and limited measurements. Furthermore, the features of the distribution system present significant local variations, e.g., voltage level and number and type of customers, which makes it hard to design a "one-size-fits-all" state estimator. The present paper introduces a unifying framework that allows to easily implement and compare diverse unbalanced static state estimation models. This is achieved by formulating state estimation as a general constrained optimization problem. The advantages of this approach are described and supported by numerical illustration on a large set of distribution feeders. The framework is also implemented and made available open-source.
△ Less
Submitted 23 November, 2020;
originally announced November 2020.
