Showing 1–50 of 57 results for author: Valkama, M

Phase-Only Positioning: Overcoming Integer Ambiguity Challenge through Deep Learning

Authors: Fatih Ayten, Mehmet C. Ilter, Ossi Kaltiokallio, Jukka Talvitie, Akshay Jain, Elena Simona Lohan, Henk Wymeersch, Mikko Valkama

Abstract: This paper investigates uplink carrier phase positioning (CPP) in cell-free (CF) or distributed antenna system context, assuming a challenging case where only phase measurements are utilized as observations. In general, CPP can achieve sub-meter to centimeter-level accuracy but is challenged by the integer ambiguity problem. In this work, we propose two deep learning approaches for phase-only posi… ▽ More This paper investigates uplink carrier phase positioning (CPP) in cell-free (CF) or distributed antenna system context, assuming a challenging case where only phase measurements are utilized as observations. In general, CPP can achieve sub-meter to centimeter-level accuracy but is challenged by the integer ambiguity problem. In this work, we propose two deep learning approaches for phase-only positioning, overcoming the integer ambiguity challenge. The first one directly uses phase measurements, while the second one first estimates integer ambiguities and then integrates them with phase measurements for improved accuracy. Our numerical results demonstrate that an inference complexity reduction of two to three orders of magnitude is achieved, compared to maximum likelihood baseline solution, depending on the approach and parameter configuration. This emphasizes the potential of the developed deep learning solutions for efficient and precise positioning in future CF 6G systems. △ Less

Submitted 9 June, 2025; originally announced June 2025.

Pilot-Based End-to-End Radio Positioning and Mapping for ISAC: Beyond Point-Based Landmarks

Authors: Yu Ge, Musa Furkan Keskin, Hui Chen, Ossi Kaltiokallio, Mengting Li, Mikko Valkama, Christos Masouros, Henk Wymeersch

Abstract: Integrated sensing and communication enables simultaneous communication and sensing tasks, including precise radio positioning and mapping, essential for future 6G networks. Current methods typically model environmental landmarks as isolated incidence points or small reflection areas, lacking detailed attributes essential for advanced environmental interpretation. This paper addresses these limita… ▽ More Integrated sensing and communication enables simultaneous communication and sensing tasks, including precise radio positioning and mapping, essential for future 6G networks. Current methods typically model environmental landmarks as isolated incidence points or small reflection areas, lacking detailed attributes essential for advanced environmental interpretation. This paper addresses these limitations by developing an end-to-end cooperative uplink framework involving multiple base stations and users. Our method uniquely estimates extended landmark objects and incorporates obstruction-based outlier removal to mitigate multi-bounce signal effects. Validation using realistic ray-tracing data demonstrates substantial improvements in the richness of the estimated environmental map. △ Less

Submitted 12 May, 2025; originally announced May 2025.

UNILoc: Unified Localization Combining Model-Based Geometry and Unsupervised Learning

Authors: Yuhao Zhang, Guangjin Pan, Musa Furkan Keskin, Ossi Kaltiokallio, Mikko Valkama, Henk Wymeersch

Abstract: Accurate mobile device localization is critical for emerging 5G/6G applications such as autonomous vehicles and augmented reality. In this paper, we propose a unified localization method that integrates model-based and machine learning (ML)-based methods to reap their respective advantages by exploiting available map information. In order to avoid supervised learning, we generate training labels a… ▽ More Accurate mobile device localization is critical for emerging 5G/6G applications such as autonomous vehicles and augmented reality. In this paper, we propose a unified localization method that integrates model-based and machine learning (ML)-based methods to reap their respective advantages by exploiting available map information. In order to avoid supervised learning, we generate training labels automatically via optimal transport (OT) by fusing geometric estimates with building layouts. Ray-tracing based simulations are carried out to demonstrate that the proposed method significantly improves positioning accuracy for both line-of-sight (LoS) users (compared to ML-based methods) and non-line-of-sight (NLoS) users (compared to model-based methods). Remarkably, the unified method is able to achieve competitive overall performance with the fully-supervised fingerprinting, while eliminating the need for cumbersome labeled data measurement and collection. △ Less

Submitted 27 April, 2025; v1 submitted 24 April, 2025; originally announced April 2025.

Comments: 6 pages, submitted to IEEE conference

Detection with Uncertainty in Target Direction for Dual Functional Radar and Communication Systems

Authors: Mateen Ashraf, Anna Gaydamaka, Dmitri Moltchanov, John Thompson, Mikko Valkama, Bo Tan

Abstract: Dual functional radar and communication (DFRC) systems are a viable approach to extend the services of future communication systems. Most studies designing DFRC systems assume that the target direction is known. In our paper, we address a critical scenario where this information is not exactly known. For such a system, a signal-to-clutter-plus-noise ratio (SCNR) maximization problem is formulated.… ▽ More Dual functional radar and communication (DFRC) systems are a viable approach to extend the services of future communication systems. Most studies designing DFRC systems assume that the target direction is known. In our paper, we address a critical scenario where this information is not exactly known. For such a system, a signal-to-clutter-plus-noise ratio (SCNR) maximization problem is formulated. Quality-of-service constraints for communication users (CUs) are also incorporated as constraints on their received signal-to-interference-plus-noise ratios (SINRs). To tackle the nonconvexity, an iterative alternating optimization approach is developed where, at each iteration, the optimization is alternatively performed with respect to transmit and receive beamformers. Specifically, a penalty-based approach is used to obtain an efficient sub-optimal solution for the resulting subproblem with regard to transmit beamformers. Next, a globally optimal solution is obtained for receive beamformers with the help of the Dinkleback approach. The convergence of the proposed algorithm is also proved by proving the nondecreasing nature of the objective function with iterations. The numerical results illustrate the effectiveness of the proposed approach. Specifically, it is observed that the proposed algorithm converges within almost 3 iterations, and the SCNR performance is almost unchanged with the number of possible target directions. △ Less

Submitted 10 December, 2024; originally announced December 2024.

Target Handover in Distributed Integrated Sensing and Communication

Authors: Yu Ge, Ossi Kaltiokallio, Hui Chen, Jukka Talvitie, Yuxuan Xia, Giyyarpuram Madhusudan, Guillaume Larue, Lennart Svensson, Mikko Valkama, Henk Wymeersch

Abstract: The concept of 6G distributed integrated sensing and communications (DISAC) builds upon the functionality of integrated sensing and communications (ISAC) by integrating distributed architectures, significantly enhancing both sensing and communication coverage and performance. In 6G DISAC systems, tracking target trajectories requires base stations (BSs) to hand over their tracked targets to neighb… ▽ More The concept of 6G distributed integrated sensing and communications (DISAC) builds upon the functionality of integrated sensing and communications (ISAC) by integrating distributed architectures, significantly enhancing both sensing and communication coverage and performance. In 6G DISAC systems, tracking target trajectories requires base stations (BSs) to hand over their tracked targets to neighboring BSs. Determining what information to share, where, how, and when is critical to effective handover. This paper addresses the target handover challenge in DISAC systems and introduces a method enabling BSs to share essential target trajectory information at appropriate time steps, facilitating seamless handovers to other BSs. The target tracking problem is tackled using the standard trajectory Poisson multi-Bernoulli mixture (TPMBM) filter, enhanced with the proposed handover algorithm. Simulation results confirm the effectiveness of the implemented tracking solution. △ Less

Submitted 4 November, 2024; originally announced November 2024.

Comments: Submitted to ICC 2025

DECT-2020 NR Link Distance Performance in Varying Environments: Models and Measurements

Authors: Md Mohaiminul Haque, Joonas Sae, Juho Pirskanen, Mikko Valkama

Abstract: Digital Enhanced Cordless Telecommunications 2020 New Radio (DECT-2020 NR) has garnered recognition as an alternative for cellular 5G technology in the internet of things industry. This paper presents a study centered around the analysis of the link distance performance in varying environments for DECT-2020 NR. The study extensively examines and analyzes received signal strength indicator and resu… ▽ More Digital Enhanced Cordless Telecommunications 2020 New Radio (DECT-2020 NR) has garnered recognition as an alternative for cellular 5G technology in the internet of things industry. This paper presents a study centered around the analysis of the link distance performance in varying environments for DECT-2020 NR. The study extensively examines and analyzes received signal strength indicator and resulting path loss values in comparison with theoretical models, as well as packet success rates (SR) and signal-to-noise ratio against varying distances. The measurements show that with an SR of over 90%, an antenna height of 1.5 m, indoor link distances with a single device-to-device connection with 0 dBm transmission (TX) power can reach over 60 m in non-line-of-sight (NLOS) areas and up to 190 m in LOS areas with smaller -8 dBm TX power. Similarly, for outdoor use cases, link distances of over 600 m can be reached with +19 dBm TX power. △ Less

Submitted 4 March, 2025; v1 submitted 31 October, 2024; originally announced October 2024.

Comments: Submitted for publication in EuCAP-2025 conference, 5 pages, 5 figures, and 4 tables

Batch SLAM with PMBM Data Association Sampling and Graph-Based Optimization

Authors: Yu Ge, Ossi Kaltiokallio, Yuxuan Xia, Ángel F. García-Fernández, Hyowon Kim, Jukka Talvitie, Mikko Valkama, Henk Wymeersch, Lennart Svensson

Abstract: Simultaneous localization and mapping (SLAM) methods need to both solve the data association (DA) problem and the joint estimation of the sensor trajectory and the map, conditioned on a DA. In this paper, we propose a novel integrated approach to solve both the DA problem and the batch SLAM problem simultaneously, combining random finite set (RFS) theory and the graph-based SLAM approach. A sampli… ▽ More Simultaneous localization and mapping (SLAM) methods need to both solve the data association (DA) problem and the joint estimation of the sensor trajectory and the map, conditioned on a DA. In this paper, we propose a novel integrated approach to solve both the DA problem and the batch SLAM problem simultaneously, combining random finite set (RFS) theory and the graph-based SLAM approach. A sampling method based on the Poisson multi-Bernoulli mixture (PMBM) density is designed for dealing with the DA uncertainty, and a graph-based SLAM solver is applied for the conditional SLAM problem. In the end, a post-processing approach is applied to merge SLAM results from different iterations. Using synthetic data, it is demonstrated that the proposed SLAM approach achieves performance close to the posterior Cramér-Rao bound, and outperforms state-of-the-art RFS-based SLAM filters in high clutter and high process noise scenarios. △ Less

Submitted 16 July, 2024; originally announced July 2024.

Multicarrier ISAC: Advances in Waveform Design, Signal Processing and Learning under Non-Idealities

Authors: Visa Koivunen, Musa Furkan Keskin, Henk Wymeersch, Mikko Valkama, Nuria González-Prelcic

Abstract: This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna re… ▽ More This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna resources. Focusing on multicarrier (MC) systems, which represent the most widely used communication waveforms, it explores the co-design and optimization of waveforms alongside multiantenna transceiver signal processing for communications and both monostatic and bistatic sensing applications of ISAC. Moreover, techniques of high practical relevance for overcoming and even harnessing challenges posed by non-idealities in actual transceiver implementations are considered. To operate in highly dynamic radio environments and target scenarios, both model-based structured optimization and learning-based methodologies for ISAC systems are covered, assessing their adaptability and learning capabilities under real-world conditions. The paper presents trade-offs in communication-centric and radar-sensing-centric approaches, aiming for an optimized balance in densely used spectrum. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: To appear in IEEE Signal Processing Magazine

Robust NLoS Localization in 5G mmWave Networks: Data-based Methods and Performance

Authors: Roman Klus, Jukka Talvitie, Julia Vinogradova, Gabor Fodor, Johan Torsner, Mikko Valkama

Abstract: Ensuring smooth mobility management while employing directional beamformed transmissions in 5G millimeter-wave networks calls for robust and accurate user equipment (UE) localization and tracking. In this article, we develop neural network-based positioning models with time- and frequency-domain channel state information (CSI) data in harsh non-line-of-sight (NLoS) conditions. We propose a novel f… ▽ More Ensuring smooth mobility management while employing directional beamformed transmissions in 5G millimeter-wave networks calls for robust and accurate user equipment (UE) localization and tracking. In this article, we develop neural network-based positioning models with time- and frequency-domain channel state information (CSI) data in harsh non-line-of-sight (NLoS) conditions. We propose a novel frequency-domain feature extraction, which combines relative phase differences and received powers across resource blocks, and offers robust performance and reliability. Additionally, we exploit the multipath components and propose an aggregate time-domain feature combining time-of-flight, angle-of-arrival and received path-wise powers. Importantly, the temporal correlations are also harnessed in the form of sequence processing neural networks, which prove to be of particular benefit for vehicular UEs. Realistic numerical evaluations in large-scale line-of-sight (LoS)-obstructed urban environment with moving vehicles are provided, building on full ray-tracing based propagation modeling. The results show the robustness of the proposed CSI features in terms of positioning accuracy, and that the proposed models reliably localize UEs even in the absence of a LoS path, clearly outperforming the state-of-the-art with similar or even reduced processing complexity. The proposed sequence-based neural network model is capable of tracking the UE position, speed and heading simultaneously despite the strong uncertainties in the CSI measurements. Finally, it is shown that differences between the training and online inference environments can be efficiently addressed and alleviated through transfer learning. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 16 pages, 13 figures, manuscript currently in review with IEEE

Integrated Monostatic Sensing and Full-Duplex Multiuser Communication for mmWave Systems

Authors: Murat Bayraktar, Nuria González-Prelcic, Mikko Valkama, Hao Chen, Charlie Jianzhong Zhang

Abstract: In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation… ▽ More In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation of self-interference (SI) caused by simultaneous transmission and reception at the FD base station (BS). Additionally, MU interference needs to be handled by the precoder/combiner design. The resulting optimization problem involves non-convex constraints since hybrid analog/digital architectures utilize networks of phase shifters. To solve the proposed problem, we separate the optimization of each precoder/combiner, and design each one of them while fixing the others. The precoders at the FD BS are designed by reformulating the communication and sensing constraints as signal-to-leakage-plus-noise ratio (SLNR) maximization problems that consider SI and MU interference as leakage. Furthermore, we design the frequency-flat analog combiner such that the residual SI at the FD BS is minimized under communication and sensing gain constraints. Finally, we design an interference-aware digital combining stage that separates MU signals and target reflections. The communication performance and sensing results show that the proposed framework efficiently supports both functionalities simultaneously. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

The Integrated Sensing and Communication Revolution for 6G: Vision, Techniques, and Applications

Authors: Nuria González-Prelcic, Musa Furkan Keskin, Ossi Kaltiokallio, Mikko Valkama, Davide Dardari, Xiao Shen, Yuan Shen, Murat Bayraktar, Henk Wymeersch

Abstract: Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that har… ▽ More Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that harnesses all these sensing data can not only enable additional sensing services, but also become more resilient to channel-dependent effects like blockage and better support adaptation in dynamic environments as networks reconfigure. In this paper, we provide a vision for integrated sensing and communication (ISAC) networks and an overview of how signal processing, optimization and machine learning techniques can be leveraged to make them a reality in the context of 6G. We also include some examples of the performance of several of these strategies when evaluated using a simulation framework based on a combination of ray tracing measurements and mathematical models that mix the digital and physical worlds. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Deep SIMO Auto-Encoder and Radio Frequency Hardware Impairments Modeling for Physical Layer Security

Authors: Abdullahi Mohammad, Mahmoud Tukur Kabir, Mikko Valkama, Bo Tan

Abstract: This paper presents a novel approach to achieving secure wireless communication by leveraging the inherent characteristics of wireless channels through end-to-end learning using a single-input-multiple-output (SIMO) autoencoder (AE). To ensure a more realistic signal transmission, we derive the signal model that captures all radio frequency (RF) hardware impairments to provide reliable and secure… ▽ More This paper presents a novel approach to achieving secure wireless communication by leveraging the inherent characteristics of wireless channels through end-to-end learning using a single-input-multiple-output (SIMO) autoencoder (AE). To ensure a more realistic signal transmission, we derive the signal model that captures all radio frequency (RF) hardware impairments to provide reliable and secure communication. Performance evaluations against traditional linear decoders, such as zero-forcing (ZR) and linear minimum mean square error (LMMSE), and the optimal nonlinear decoder, maximum likelihood (ML), demonstrate that the AE-based SIMO model exhibits superior bit error rate (BER) performance, but with a substantial gap even in the presence of RF hardware impairments. Additionally, the proposed model offers enhanced security features, preventing potential eavesdroppers from intercepting transmitted information and leveraging RF impairments for augmented physical layer security and device identification. These findings underscore the efficacy of the proposed end-to-end learning approach in achieving secure and robust wireless communication. △ Less

Submitted 10 August, 2024; v1 submitted 30 April, 2024; originally announced April 2024.

Comments: 6 pages, 5 figures, conference

Robust Snapshot Radio SLAM

Authors: Ossi Kaltiokallio, Elizaveta Rastorgueva-Foi, Jukka Talvitie, Yu Ge, Henk Wymeersch, Mikko Valkama

Abstract: The intrinsic geometric connections between millimeter-wave (mmWave) signals and the propagation environment can be leveraged for simultaneous localization and mapping (SLAM) in 5G and beyond networks. However, estimated channel parameters that are mismatched to the utilized geometric model can cause the SLAM solution to degrade. In this paper, we propose a robust snapshot radio SLAM algorithm for… ▽ More The intrinsic geometric connections between millimeter-wave (mmWave) signals and the propagation environment can be leveraged for simultaneous localization and mapping (SLAM) in 5G and beyond networks. However, estimated channel parameters that are mismatched to the utilized geometric model can cause the SLAM solution to degrade. In this paper, we propose a robust snapshot radio SLAM algorithm for mixed line-of-sight (LoS) and non-line-of-sight (NLoS) environments that can estimate the unknown user equipment (UE) state, map of the environment as well as the presence of the LoS path. The proposed method can accurately detect outliers and the LoS path, enabling robust estimation in both LoS and NLoS conditions. The proposed method is validated using 60 GHz experimental data, indicating superior performance compared to the state-of-the-art. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Time vs. Frequency Domain DPD for Massive MIMO: Methods and Performance Analysis

Authors: Yibo Wu, Ulf Gustavsson, Mikko Valkama, Alexandre Graell i Amat, Henk Wymeersch

Abstract: The use of up to hundreds of antennas in massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) poses a complexity challenge for digital predistortion (DPD) aiming to linearize the nonlinear power amplifiers (PAs). While the complexity for conventional time domain (TD) DPD scales with the number of PAs, frequency domain (FD) DPD has a comple… ▽ More The use of up to hundreds of antennas in massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) poses a complexity challenge for digital predistortion (DPD) aiming to linearize the nonlinear power amplifiers (PAs). While the complexity for conventional time domain (TD) DPD scales with the number of PAs, frequency domain (FD) DPD has a complexity scaling with the number of user equipments (UEs). In this work, we provide a comprehensive analysis of different state-of-the-art TD and FD-DPD schemes in terms of complexity and linearization performance in both rich scattering and line-of-sight (LOS) channels and with antenna crosstalk. We propose a novel low-complexity FD convolutional neural network (CNN) DPD. We also propose a learning algorithm for any FD-DPDs with differentiable structure. The analysis shows that FD-DPD, particularly the proposed FD CNN, is preferable in LOS scenarios with few users, due to the favorable trade-off between complexity and linearization performance. On the other hand, in scenarios with more users or isotropic scattering channels, significant intermodulation distortions among UEs degrade FD-DPD performance, making TD-DPD more suitable. The proposed learning algorithm allows FD-DPDs to outperform TD-DPD optimized by indirect learning architecture under antenna crosstalk. △ Less

Submitted 24 October, 2024; v1 submitted 26 February, 2024; originally announced February 2024.

Comments: 15 pages, 11 figures, submitted to an IEEE Journal

Millimeter-wave Radio SLAM: End-to-End Processing Methods and Experimental Validation

Authors: Elizaveta Rastorgueva-Foi, Ossi Kaltiokallio, Yu Ge, Matias Turunen, Jukka Talvitie, Bo Tan, Musa Furkan Keskin, Henk Wymeersch, Mikko Valkama

Abstract: In this article, we address the timely topic of cellular bistatic simultaneous localization and mapping (SLAM) with specific focus on end-to-end processing solutions, from raw I/Q samples, via channel parameter estimation to user equipment (UE) and landmark location information in millimeter-wave (mmWave) networks, with minimal prior knowledge. Firstly, we propose a new multipath channel parameter… ▽ More In this article, we address the timely topic of cellular bistatic simultaneous localization and mapping (SLAM) with specific focus on end-to-end processing solutions, from raw I/Q samples, via channel parameter estimation to user equipment (UE) and landmark location information in millimeter-wave (mmWave) networks, with minimal prior knowledge. Firstly, we propose a new multipath channel parameter estimation solution that operates directly with beam reference signal received power (BRSRP) measurements, alleviating the need to know the true antenna beam-patterns or the underlying beamforming weights. Additionally, the method has built-in robustness against unavoidable antenna sidelobes. Secondly, we propose new snapshot SLAM algorithms that have increased robustness and identifiability compared to prior art, in practical built environments with complex clutter and multi-bounce propagation scenarios, and do not rely on any a priori motion model. The performance of the proposed methods is assessed at the 60 GHz mmWave band, via both realistic ray-tracing evaluations as well as true experimental measurements, in an indoor environment. A wide set of offered results demonstrate the improved performance, compared to the relevant prior art, in terms of the channel parameter estimation as well as the end-to-end SLAM performance. Finally, the article provides the measured 60 GHz data openly available for the research community, facilitating results reproducibility as well as further algorithm development. △ Less

Submitted 20 May, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Comments: Accepted to IEEE Journal on Selected Areas in Communications Special Issue on Positioning and Sensing Over Wireless Networks

JrCUP: Joint RIS Calibration and User Positioning for 6G Wireless Systems

Authors: Pinjun Zheng, Hui Chen, Tarig Ballal, Mikko Valkama, Henk Wymeersch, Tareq Y. Al-Naffouri

Abstract: Reconfigurable intelligent surface (RIS)-assisted localization has attracted extensive attention as it can enable and enhance localization services in extreme scenarios. However, most existing works treat RISs as anchors with known positions and orientations, which is not realistic in applications with mobile or uncalibrated RISs. This work considers the joint RIS calibration and user positioning… ▽ More Reconfigurable intelligent surface (RIS)-assisted localization has attracted extensive attention as it can enable and enhance localization services in extreme scenarios. However, most existing works treat RISs as anchors with known positions and orientations, which is not realistic in applications with mobile or uncalibrated RISs. This work considers the joint RIS calibration and user positioning (JrCUP) problem with an active RIS. We propose a novel two-stage method to solve the considered JrCUP problem. The first stage comprises a tensor-estimation of signal parameters via rotational invariance techniques (tensorESPRIT), followed by a channel parameters refinement using least-squares. In the second stage, a two-dimensional search algorithm is proposed to estimate the three-dimensional user and RIS positions, one-dimensional RIS orientation, and clock bias from the estimated channel parameters. The Cramer-Rao lower bounds of the channel parameters and localization parameters are derived to verify the effectiveness of the proposed tensorESPRIT-based algorithms. In addition, simulation results reveal that the active RIS can significantly improve the localization performance compared to the passive case under the same system power supply in practical regions. Moreover, we observe the presence of blind areas with limited JrCUP localization performance, which can be mitigated by either leveraging more prior information or deploying extra base stations. △ Less

Submitted 4 January, 2024; v1 submitted 2 April, 2023; originally announced April 2023.

Joint RIS Calibration and Multi-User Positioning

Authors: Yi Lu, Hui Chen, Jukka Talvitie, Henk Wymeersch, Mikko Valkama

Abstract: Reconfigurable intelligent surfaces (RISs) are expected to be a key component enabling the mobile network evolution towards a flexible and intelligent 6G wireless platform. In most of the research works so far, RIS has been treated as a passive base station (BS) with a known state, in terms of its location and orientation, to boost the communication and/or terminal positioning performance. However… ▽ More Reconfigurable intelligent surfaces (RISs) are expected to be a key component enabling the mobile network evolution towards a flexible and intelligent 6G wireless platform. In most of the research works so far, RIS has been treated as a passive base station (BS) with a known state, in terms of its location and orientation, to boost the communication and/or terminal positioning performance. However, such performance gains cannot be guaranteed anymore when the RIS state is not perfectly known. In this paper, by taking the RIS state uncertainty into account, we formulate and study the performance of a joint RIS calibration and user positioning (JrCUP) scheme. From the Fisher information perspective, we formulate the JrCUP problem in a network-centric single-input multiple-output (SIMO) scenario with a single BS, and derive the analytical lower bound for the states of both user and RIS. We also demonstrate the geometric impact of different user locations on the JrCUP performance while also characterizing the performance under different RIS sizes. Finally, the study is extended to a multi-user scenario, shown to further improve the state estimation performance. △ Less

Submitted 8 December, 2022; originally announced December 2022.

MmWave Mapping and SLAM for 5G and Beyond

Authors: Yu Ge, Ossi Kaltiokallio, Hyowon Kim, Jukka Talvitie, Sunwoo Kim, Lennart Svensson, Mikko Valkama, Henk Wymeersch

Abstract: Device localization and radar-like mapping are at the heart of integrated sensing and communication, enabling not only new services and applications, but can also improve communication quality with reduced overheads. These forms of sensing are however susceptible to data association problems, due to the unknown relation between measurements and detected objects or targets. In this chapter, we prov… ▽ More Device localization and radar-like mapping are at the heart of integrated sensing and communication, enabling not only new services and applications, but can also improve communication quality with reduced overheads. These forms of sensing are however susceptible to data association problems, due to the unknown relation between measurements and detected objects or targets. In this chapter, we provide an overview of the fundamental tools used to solve mapping, tracking, and simultaneous localization and mapping (SLAM) problems. We distinguish the different types of sensing problems and then focus on mapping and SLAM as running examples. Starting from the applicable models and definitions, we describe the different algorithmic approaches, with a particular focus on how to deal with data association problems. In particular, methods based on random finite set theory and Bayesian graphical models are introduced in detail. A numerical study with synthetic and experimental data is then used to compare these approaches in a variety of scenarios. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: This is a preprint of the following chapter: Yu Ge, Ossi Kaltiokallio, Hyowon Kim, Jukka Talvitie, Sunwoo Kim, Lennart Svensson, Mikko Valkama, Henk Wymeersch, MmWave Mapping and SLAM for 5G and Beyond, published in Integrated Sensing and Communications (ISAC), edited by Fan Liu, Yonina C. Eldar, Christos Masouros, 2023, Springer reproduced with permission of Springer

Doppler Exploitation in Bistatic mmWave Radio SLAM

Authors: Yu Ge, Ossi Kaltiokallio, Hui Chen, Fan Jiang, Jukka Talvitie, Mikko Valkama, Lennart Svensson, Henk Wymeersch

Abstract: Networks in 5G and beyond utilize millimeter wave (mmWave) radio signals, large bandwidths, and large antenna arrays, which bring opportunities in jointly localizing the user equipment and mapping the propagation environment, termed as simultaneous localization and mapping (SLAM). Existing approaches mainly rely on delays and angles, and ignore the Doppler, although it contains geometric informati… ▽ More Networks in 5G and beyond utilize millimeter wave (mmWave) radio signals, large bandwidths, and large antenna arrays, which bring opportunities in jointly localizing the user equipment and mapping the propagation environment, termed as simultaneous localization and mapping (SLAM). Existing approaches mainly rely on delays and angles, and ignore the Doppler, although it contains geometric information. In this paper, we study the benefits of exploiting Doppler in SLAM through deriving the posterior Cramér-Rao bounds (PCRBs) and formulating the extended Kalman-Poisson multi-Bernoulli sequential filtering solution with Doppler as one of the involved measurements. Both theoretical PCRB analysis and simulation results demonstrate the efficacy of utilizing Doppler. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Towards Length-Versatile and Noise-Robust Radio Frequency Fingerprint Identification

Authors: Guanxiong Shen, Junqing Zhang, Alan Marshall, Mikko Valkama, Joseph Cavallaro

Abstract: Radio frequency fingerprint identification (RFFI) can classify wireless devices by analyzing the signal distortions caused by the intrinsic hardware impairments. State-of-the-art neural networks have been adopted for RFFI. However, many neural networks, e.g., multilayer perceptron (MLP) and convolutional neural network (CNN), require fixed-size input data. In addition, many IoT devices work in low… ▽ More Radio frequency fingerprint identification (RFFI) can classify wireless devices by analyzing the signal distortions caused by the intrinsic hardware impairments. State-of-the-art neural networks have been adopted for RFFI. However, many neural networks, e.g., multilayer perceptron (MLP) and convolutional neural network (CNN), require fixed-size input data. In addition, many IoT devices work in low signal-to-noise ratio (SNR) scenarios but the RFFI performance in such scenarios is rarely investigated. In this paper, we analyze the reason why MLP- and CNN-based RFFI systems are constrained by the input size. To overcome this, we propose four neural networks that can process signals of variable lengths, namely flatten-free CNN, long short-term memory (LSTM) network, gated recurrent unit (GRU) network and transformer. We adopt data augmentation during training which can significantly improve the model's robustness to noise. We compare two augmentation schemes, namely offline and online augmentation. The results show the online one performs better. During the inference, a multi-packet inference approach is further leveraged to improve the classification accuracy in low SNR scenarios. We take LoRa as a case study and evaluate the system by classifying 10 commercial-off-the-shelf LoRa devices in various SNR conditions. The online augmentation can boost the low-SNR classification accuracy by up to 50% and the multi-packet inference approach can further increase the accuracy by over 20%. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Frequency-domain digital predistortion for Massive MU-MIMO-OFDM Downlink

Authors: Yibo Wu, Ulf Gustavsson, Mikko Valkama, Alexandre Graell i Amat, Henk Wymeersch

Abstract: Digital predistortion (DPD) is a method commonly used to compensate for the nonlinear effects of power amplifiers (PAs). However, the computational complexity of most DPD algorithms becomes an issue in the downlink of massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM), where potentially up to several hundreds of PAs in the base station (… ▽ More Digital predistortion (DPD) is a method commonly used to compensate for the nonlinear effects of power amplifiers (PAs). However, the computational complexity of most DPD algorithms becomes an issue in the downlink of massive multi-user (MU) multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM), where potentially up to several hundreds of PAs in the base station (BS) require linearization. In this paper, we propose a convolutional neural network (CNN)-based DPD in the frequency domain, taking place before the precoding, where the dimensionality of the signal space depends on the number of users, instead of the number of BS antennas. Simulation results on generalized memory polynomial (GMP)-based PAs show that the proposed CNN-based DPD can lead to very large complexity savings as the number of BS antenna increases at the expense of a small increase in power to achieve the same symbol error rate (SER). △ Less

Submitted 10 May, 2022; originally announced May 2022.

Comments: Submitted to IEEE GLOBECOM 2022

Flexible fast-convolution processing for cellular radio evolution

Authors: Juha Yli-Kaakinen, Toni Levanen, Arto Palin, Markku Renfors, Mikko Valkama

Abstract: Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been considered recently as an effective tool for spectrum enhancement of OFDM-based waveforms. FC-based filtering approximates linear convolution by effective fast Fourier… ▽ More Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been considered recently as an effective tool for spectrum enhancement of OFDM-based waveforms. FC-based filtering approximates linear convolution by effective fast Fourier transform (FFT)-based circular convolutions using partly overlapping processing blocks. In earlier work, we have shown that FC-based filtering is a very flexible and efficient tool for filtered-OFDM signal generation and receiver side subband filtering. In this paper, we present a symbol-synchronous FC-processing scheme flexibly allowing filter re-configuration time resolution equal to one OFDM symbol while supporting tight carrier-wise filtering for 5G NR in mixed-numerology scenarios with adjustable subcarrier spacings, center frequencies, and subband bandwidths as well as providing co-exitence with LTE. The proposed scheme is demonstrated to support envisioned use cases of 5G NR and provide flexible starting point for sixth generation development. △ Less

Submitted 5 February, 2022; originally announced February 2022.

Comments: This work has been submitted to the IEEE Transactions on Communications for possible publication

Iterated Posterior Linearization PMB Filter for 5G SLAM

Authors: Yu Ge, Yibo Wu, Fan Jiang, Ossi Kaltiokallio, Jukka Talvitie, Mikko Valkama, Lennart Svensson, Henk Wymeersch

Abstract: 5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and mapping (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To s… ▽ More 5G millimeter wave (mmWave) signals have inherent geometric connections to the propagation channel and the propagation environment. Thus, they can be used to jointly localize the receiver and map the propagation environment, which is termed as simultaneous localization and mapping (SLAM). One of the most important tasks in the 5G SLAM is to deal with the nonlinearity of the measurement model. To solve this problem, existing 5G SLAM approaches rely on sigma-point or extended Kalman filters, linearizing the measurement function with respect to the prior probability density function (PDF). In this paper, we study the linearization of the measurement function with respect to the posterior PDF, and implement the iterated posterior linearization filter into the Poisson multi-Bernoulli SLAM filter. Simulation results demonstrate the accuracy and precision improvements of the resulting SLAM filter. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Radio Frequency Fingerprint Identification for Security in Low-Cost IoT Devices

Authors: Guanxiong Shen, Junqing Zhang, Alan Marshall, Mikko Valkama, Joseph Cavallaro

Abstract: Radio frequency fingerprint identification (RFFI) can uniquely classify wireless devices by analyzing the received signal distortions caused by the intrinsic hardware impairments. The state-of-the-art deep learning techniques such as convolutional neural network (CNN) have been adopted to classify IoT devices with high accuracy. However, deep learning-based RFFI requires input data of a fixed size… ▽ More Radio frequency fingerprint identification (RFFI) can uniquely classify wireless devices by analyzing the received signal distortions caused by the intrinsic hardware impairments. The state-of-the-art deep learning techniques such as convolutional neural network (CNN) have been adopted to classify IoT devices with high accuracy. However, deep learning-based RFFI requires input data of a fixed size. In addition, many IoT devices work in low signal-to-noise ratio (SNR) scenarios but the low SNR RFFI is rarely investigated. In this paper, the state-of-the-art transformer model is used as the classifier, which can process signals of variable length. Data augmentation is adopted to improve low SNR RFFI performance. A multi-packet inference approach is further proposed to improve the classification accuracy in low SNR scenarios. We take LoRa as a case study and evaluate the system by classifying 10 commercial-off-the-shelf LoRa devices in various SNR conditions. The online augmentation can boost the low SNR RFFI performance by up to 50% and multi-packet inference can further increase it by over 20%. △ Less

Submitted 28 November, 2021; originally announced November 2021.

Comments: Asilomar 2021

Phase Noise Resilient Three-Level Continuous-Phase Modulation for DFT-Spread OFDM

Authors: Markku Renfors, Ismael Peruga Nasarre, Toni Levanen, Mikko Valkama, Kari Pajukoski

Abstract: A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and… ▽ More A novel OFDM-based waveform with low peak-to-average power ratio (PAPR) and high robustness against phase noise (PN) is presented. It follows the discrete Fourier transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) signal model. 3MSK, is inspired by continuous-phase frequency shift keying (FSK), but it uses three frequencies in the baseband model -- specifically, 0 and $\pm f_{symbol}/4$, where $f_{symbol}$ is the symbol rate -- which effectively constrains the phase transitions between consecutive symbols to 0 and $\pm π/2$ rad. Motivated by the phase controlled model of modulation, different degrees of phase continuity can be achieved, while supporting receiver processing with low complexity. The signal characteristics are improved by generating an initial time-domain nearly constant envelope signal at higher than the symbol rate. This helps to reach smooth phase transitions between 3MSK symbols. Also the possibility of using excess bandwidth is investigated by transmitting additional non-zero subcarriers outside active subcarriers of the basic DFT-s-OFDM model, which provides the capability to greatly reduce the PAPR. Due to the fact that the information is encoded in the phase transitions, a receiver model that tracks the phase variations without needing reference signals is developed. To this end, it is shown that this new modulation is well-suited for non-coherent receivers, even under strong phase noise (PN) conditions, thus allowing to reduce the overhead of reference signals. Evaluations of this physical-layer modulation and waveform scheme are performed in terms of transmitter metrics such as PAPR, OOB emissions and achievable output power after the power amplifier (PA). Finally, coded radio link evaluations are also shown and provided, demonstrating that 3MSK has a similar BER performance as that of traditional QPSK. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Comments: 14 pages, 17 figures. Submitted to IEEE Open Journal of the Communications Society

Beamformer Design and Optimization for Full-Duplex Joint Communication and Sensing at mm-Waves

Authors: Carlos Baquero Barneto, Taneli Riihonen, Sahan Damith Liyanaarachchi, Mikko Heino, Nuria González-Prelcic, Mikko Valkama

Abstract: In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimizatio… ▽ More In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimization problems for hybrid beamforming based multiuser multiple-input and multiple-output JCAS systems. The cost function to be maximized is the beamformed power at the sensing direction while constraining the beamformed power at the communications directions, suppressing interuser interference and cancelling full-duplexing related self-interference (SI). We then also propose new transmitter and receiver beamforming solutions for purely analog beamforming based JCAS systems that maximize the beamforming gain at the sensing direction while controlling the beamformed power at the communications direction(s), cancelling the SI as well as eliminating the potential reflection from the communication direction and optimizing the combined radar pattern (CRP). Both closed-form and numerical optimization based formulations are provided. We analyze and evaluate the performance through extensive simulations, and show that substantial gains and benefits in terms of radar transmit gain, CRP, and SI suppression can be achieved with the proposed beamforming methods. △ Less

Submitted 13 September, 2021; originally announced September 2021.

A Computationally Efficient EK-PMBM Filter for Bistatic mmWave Radio SLAM

Authors: Yu Ge, Ossi Kaltiokallio, Hyowon Kim, Fan Jiang, Jukka Talvitie, Mikko Valkama, Lennart Svensson, Sunwoo Kim, Henk Wymeersch

Abstract: Millimeter wave (mmWave) signals are useful for simultaneous localization and mapping (SLAM), due to their inherent geometric connection to the propagation environment and the propagation channel. To solve the SLAM problem, existing approaches rely on sigma-point or particle-based approximations, leading to high computational complexity, precluding real-time execution. We propose a novel low-compl… ▽ More Millimeter wave (mmWave) signals are useful for simultaneous localization and mapping (SLAM), due to their inherent geometric connection to the propagation environment and the propagation channel. To solve the SLAM problem, existing approaches rely on sigma-point or particle-based approximations, leading to high computational complexity, precluding real-time execution. We propose a novel low-complexity SLAM filter, based on the Poisson multi-Bernoulli mixture (PMBM) filter. It utilizes the extended Kalman (EK) first-order Taylor series based Gaussian approximation of the filtering distribution, and applies the track-oriented marginal multi-Bernoulli/Poisson (TOMB/P) algorithm to approximate the resulting PMBM as a Poisson multi-Bernoulli (PMB). The filter can account for different landmark types in radio SLAM and multiple data association hypotheses. Hence, it has an adjustable complexity/performance trade-off. Simulation results show that the developed SLAM filter can greatly reduce the computational cost, while it keeps the good performance of mapping and user state estimation. △ Less

Submitted 8 September, 2021; originally announced September 2021.

Converging Radar and Communications in the Superposition Transmission

Authors: Wenbo Wang, Bo Tan, Elena Simona Lohan, Mikko Valkama

Abstract: This paper proposes a superposition transmission scheme for the future Radio Frequency (RF) convergence applications. The scheme is discussed under the assumption of a mono-static broadcasting channel topology. Under communications quality-of-service (QoS) constraints, the joint performance region of communications sum rate and radar estimation error variance is studied. Two radar signal waveforms… ▽ More This paper proposes a superposition transmission scheme for the future Radio Frequency (RF) convergence applications. The scheme is discussed under the assumption of a mono-static broadcasting channel topology. Under communications quality-of-service (QoS) constraints, the joint performance region of communications sum rate and radar estimation error variance is studied. Two radar signal waveforms, namely linear FM and parabolic FM, are used to investigate how signal shapes may influence the estimation accuracy. Both waveforms are generated with rectangular envelope. In the end, a numerical analysis is applied, which concludes that a moderate communications QoS promises a good communications fairness while with the limited radar performance degradation. △ Less

Submitted 24 August, 2021; v1 submitted 12 August, 2021; originally announced August 2021.

mmWave Simultaneous Localization and Mapping Using a Computationally Efficient EK-PHD Filter

Authors: Ossi Kaltiokallio, Yu Ge, Jukka Talvitie, Henk Wymeersch, Mikko Valkama

Abstract: Future cellular networks that utilize millimeter wave signals provide new opportunities in positioning and situational awareness. Large bandwidths combined with large antenna arrays provide unparalleled delay and angle resolution, allowing high accuracy localization but also building up a map of the environment. Even the most basic filter intended for simultaneous localization and mapping exhibits… ▽ More Future cellular networks that utilize millimeter wave signals provide new opportunities in positioning and situational awareness. Large bandwidths combined with large antenna arrays provide unparalleled delay and angle resolution, allowing high accuracy localization but also building up a map of the environment. Even the most basic filter intended for simultaneous localization and mapping exhibits high computational overhead since the methods rely on sigma point or particle-based approximations. In this paper, a first order Taylor series based Gaussian approximation of the filtering distribution is used and it is demonstrated that the developed extended Kalman probability hypothesis density filter is computationally very efficient. In addition, the results imply that efficiency does not come with the expense of estimation accuracy since the method nearly achieves the position error bound. △ Less

Submitted 3 August, 2021; originally announced August 2021.

Comments: 8 pages, 8 figures

HybridDeepRx: Deep Learning Receiver for High-EVM Signals

Authors: Jaakko Pihlajasalo, Dani Korpi, Mikko Honkala, Janne M. J. Huttunen, Taneli Riihonen, Jukka Talvitie, Alberto Brihuega, Mikko A. Uusitalo, Mikko Valkama

Abstract: In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the… ▽ More In this paper, we propose a machine learning (ML) based physical layer receiver solution for demodulating OFDM signals that are subject to a high level of nonlinear distortion. Specifically, a novel deep learning based convolutional neural network receiver is devised, containing layers in both time- and frequency domains, allowing to demodulate and decode the transmitted bits reliably despite the high error vector magnitude (EVM) in the transmit signal. Extensive set of numerical results is provided, in the context of 5G NR uplink incorporating also measured terminal power amplifier characteristics. The obtained results show that the proposed receiver system is able to clearly outperform classical linear receivers as well as existing ML receiver approaches, especially when the EVM is high in comparison with modulation order. The proposed ML receiver can thus facilitate pushing the terminal power amplifier (PA) systems deeper into saturation, and thereon improve the terminal power-efficiency, radiated power and network coverage. △ Less

Submitted 30 June, 2021; originally announced June 2021.

Comments: To be presented in the 2021 IEEE International Symposium on Personal, Indoor and Mobile Radio Communications

Millimeter-wave Mobile Sensing and Environment Mapping: Models, Algorithms and Validation

Authors: Carlos Baquero Barneto, Elizaveta Rastorgueva-Foi, Musa Furkan Keskin, Taneli Riihonen, Matias Turunen, Jukka Talvitie, Henk Wymeersch, Mikko Valkama

Abstract: Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment mapping prospects with specific emphasis on the user equipment (UE) side. We first describe an efficient l1-regularized leas… ▽ More Integrating efficient connectivity, positioning and sensing functionalities into 5G New Radio (NR) and beyond mobile cellular systems is one timely research paradigm, especially at mm-wave and sub-THz bands. In this article, we address the radio-based sensing and environment mapping prospects with specific emphasis on the user equipment (UE) side. We first describe an efficient l1-regularized least-squares (LS) approach to obtain sparse range-angle charts at individual measurement or sensing locations. For the subsequent environment mapping, we then introduce a novel state model for mapping diffuse and specular scattering, which allows efficient tracking of individual scatterers over time using interacting multiple model (IMM) extended Kalman filter and smoother. Also the related measurement selection and data association problems are addressed. We provide extensive numerical indoor mapping results at the 28 GHz band deploying OFDM-based 5G NR uplink waveform with 400 MHz channel bandwidth, covering both accurate ray-tracing based as well as actual RF measurement results. The results illustrate the superiority of the dynamic tracking-based solutions, compared to static reference methods, while overall demonstrate the excellent prospects of radio-based mobile environment sensing and mapping in future mm-wave networks. △ Less

Submitted 19 January, 2022; v1 submitted 23 February, 2021; originally announced February 2021.

Comments: Accepted for publication in IEEE Transactions on Vehicular Technology

Joint Positioning and Tracking via NR Sidelink in 5G-Empowered Industrial IoT: Releasing the Potential of V2X Technology

Authors: Yi Lu, Mike Koivisto, Jukka Talvitie, Elizaveta Rastorgueva-Foi, Toni Levanen, Elena Simona Lohan, Mikko Valkama

Abstract: The fifth generation (5G) mobile networks with enhanced connectivity and positioning capabilities play an increasingly important role in the development of automated vehicle-to-everything (V2X) and other advanced industrial Internet of Things (IoT) systems. In this article, we address the prospects of 5G New Radio (NR) sidelink based V2X networks and their applicability for increasing the situatio… ▽ More The fifth generation (5G) mobile networks with enhanced connectivity and positioning capabilities play an increasingly important role in the development of automated vehicle-to-everything (V2X) and other advanced industrial Internet of Things (IoT) systems. In this article, we address the prospects of 5G New Radio (NR) sidelink based V2X networks and their applicability for increasing the situational awareness, in terms of continuous tracking of moving connected machines and vehicles, in industrial systems. For increased system flexibility and fast deployments, we assume that the locations of the so-called anchor nodes are unknown, and describe an extended Kalman filter-based joint positioning and tracking framework in which the locations of both the anchor nodes and the target nodes can be estimated simultaneously. We assess and demonstrate the achievable 3D positioning and tracking performance in the context of a realistic industrial warehouse facility, through extensive ray-tracing based evaluations at the 26 GHz NR band. Our findings show that when both angle-based and time-based measurements are utilized, reaching sub-1 meter accuracy is realistic and that the system is also relatively robust against different node geometries. Finally, several research challenges towards achieving robust, high-performance and cost-efficient positioning solutions are outlined and discussed, identifying various potential directions for future work. △ Less

Submitted 3 June, 2021; v1 submitted 15 January, 2021; originally announced January 2021.

Frequency-Domain Signal Processing for Spectrally-Enhanced CP-OFDM Waveforms in 5G New Radio

Authors: Juha Yli-Kaakinen, AlaaEddin Loulou, Toni Levanen, Kari Pajukoski, Arto Palin, Markku Renfors, Mikko Valkama

Abstract: Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G-NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFD… ▽ More Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G-NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFDM signal generation and receiver-side subband filtering, e.g., for the mixed-numerology scenarios of the 5G-NR. FC filtering approximates linear convolution through effective fast Fourier transform (FFT)-based circular convolutions using partly overlapping processing blocks. However, with the continuous overlap-and-save and overlap-and-add processing models with fixed block-size and fixed overlap, the FC-processing blocks cannot be aligned with all OFDM symbols of a transmission frame. Furthermore, 5G-NR numerology does not allow to use transform lengths shorter than 128 because this would lead to non-integer cyclic prefix (CP) lengths. In this article, we present new FC-processing schemes which solve the mentioned limitations. These schemes are based on dynamically adjusting the overlap periods and extrapolating the CP samples, which make it possible to align the FC blocks with each OFDM symbol, even in case of variable CP lengths. This reduces complexity and latency, e.g., in mini-slot transmissions and, as an example, allows to use 16-point transforms in case of a 12-subcarrier-wide subband allocation, greatly reducing the implementation complexity. On the receiver side, the proposed scheme makes it possible to effectively combine cascaded inverse and forward FFT units in FC-filtered OFDM processing. Transform decomposition is used to simplify these computations. Very extensive set of numerical results is also provided, in terms of radio-link performance and associated processing complexity. △ Less

Submitted 3 August, 2020; originally announced August 2020.

Comments: This work has been submitted to the IEEE Transactions on Wireless Communications for possible publication

Handling Spontaneous Traffic Variations in 5G+ via Offloading onto mmWave-Capable UAV `Bridges'

Authors: Nikita Tafintsev, Dmitri Moltchanov, Sergey Andreev, Shu-ping Yeh, Nageen Himayat, Yevgeni Koucheryavy, Mikko Valkama

Abstract: Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs tr… ▽ More Unmanned aerial vehicles (UAVs) are increasingly employed for numerous public and civil applications, such as goods delivery, medicine, surveillance, and telecommunications. For the latter, UAVs with onboard communication equipment may help temporarily offload traffic onto the neighboring cells in fifth-generation networks and beyond (5G+). In this paper, we propose and evaluate the use of UAVs traveling over the area of interest to relieve congestion in 5G+ systems under spontaneous traffic fluctuations. To this end, we assess two inherently different offloading schemes, named routed and controlled UAV `bridging'. Using the tools of renewal theory and stochastic geometry, we analytically characterize these schemes in terms of the fraction of traffic demand that can be offloaded onto the UAV `bridge' as our parameter of interest. This framework accounts for the unique features of millimeter-wave (mmWave) radio propagation and city deployment types with potential line-of-sight (LoS) link blockage by buildings. We also introduce enhancements to the proposed schemes that significantly improve the offloading gains. Our findings offer evidence that the UAV `bridges' may be used for efficient traffic offloading in various urban scenarios. △ Less

Submitted 23 June, 2020; originally announced June 2020.

Comments: This work has been accepted for publication in the IEEE Transactions on Vehicular Technology

UAV-Aided Interference Assessment for Private 5G NR Deployments: Challenges and Solutions

Authors: Jani Urama, Richard Wiren, Olga Galinina, Juhani Kauppi, Kimmo Hiltunen, Juha Erkkilä, Fedor Chernogorov, Pentti Eteläaho, Marjo Heikkilä, Johan Torsner, Sergey Andreev, Mikko Valkama

Abstract: Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternativ… ▽ More Industrial automation has created a high demand for private 5G networks, the deployment of which calls for an efficient and reliable solution to ensure strict compliance with the regulatory emission limits. While traditional methods for measuring outdoor interference include collecting real-world data by walking or driving, the use of unmanned aerial vehicles (UAVs) offers an attractive alternative due to their flexible mobility and adaptive altitude. As UAVs perform measurements quickly and semiautomatically, they can potentially assist in near realtime adjustments of the network configuration and fine-tuning its parameters, such as antenna settings and transmit power, as well as help improve indoor connectivity while respecting outdoor emission constraints. This article offers a firsthand tutorial on using aerial 5G emission assessment for interference management in nonpublic networks (NPNs) by reviewing the key challenges of UAV-mounted radio-scanner measurements. Particularly, we (i) outline the challenges of practical assessment of the outdoor interference originating from a local indoor 5G network while discussing regulatory and other related constraints and (ii) address practical methods and tools while summarizing the recent results of our measurement campaign. The reported proof of concept confirms that UAV-based systems represent a promising tool for capturing outdoor interference from private 5G systems. △ Less

Submitted 13 June, 2020; originally announced June 2020.

Comments: 7 pages, 4 figures

6G White Paper on Localization and Sensing

Authors: Andre Bourdoux, Andre Noll Barreto, Barend van Liempd, Carlos de Lima, Davide Dardari, Didier Belot, Elana-Simona Lohan, Gonzalo Seco-Granados, Hadi Sarieddeen, Henk Wymeersch, Jaakko Suutala, Jani Saloranta, Maxime Guillaud, Minna Isomursu, Mikko Valkama, Muhammad Reza Kahar Aziz, Rafael Berkvens, Tachporn Sanguanpuak, Tommy Svensson, Yang Miao

Abstract: This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principl… ▽ More This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Following the trend initiated in the 5G NR systems, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler and angular resolutions, as well as localization to cm-level degree of accuracy. Moreover, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. 6G will be truly intelligent wireless systems that will not only provide ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency and space. This white paper concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust. Addressing these challenges will undoubtedly require an inter-disciplinary and concerted effort from the research community. △ Less

Submitted 2 June, 2020; originally announced June 2020.

Comments: 38 pages, 12 figures, white paper

Piecewise Digital Predistortion fo mmWave Active Antenna Arrays: Algorithms and Measurements

Authors: Alberto Brihuega, Mahmoud Abdelaziz, Lauri Anttila, Matias Turunen, Markus Allén, Thomas Eriksson, Mikko Valkama

Abstract: In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA u… ▽ More In this paper, we describe a novel framework for digital predistortion (DPD) based linearization of strongly nonlinear millimeter-wave active antenna arrays. Specifically, we formulate a piecewise (PW) closed-loop (CL) DPD solution and low-complexity gradient-adaptive parameter learning algorithms, together with a region partitioning method, that can efficiently handle deep compression of the PA units. The impact of beamsteering on the DPD performance is studied, showing strong beam-dependence, thus necessitating frequent updating of the DPD. In order to facilitate fast adaptation, an inexpensive, non-iterative, pruning algorithm is introduced, which allows to significantly reduce the amount of model coefficients. The proposed methods are validated with extensive over-the-air RF measurements on a 64-element active antenna array transmitter operating at 28 GHz carrier frequency and transmitting a 400 MHz 5G New Radio (NR) standard-compliant orthogonal frequency division multiplexing waveform. The obtained results demonstrate the excellent linearization capabilities of the proposed solution, conforming to the new 5G NR requirements for frequency range 2 (FR2) in terms of both inband waveform quality and out-of-band emissions. The proposed PW-CL DPD is shown to outperform the state-of-the-art PW DPD based on the indirect learning architecture, as well as the classical single-polynomial based DPD solutions in terms of linearization performance and computational complexity by a clear margin. △ Less

Submitted 30 April, 2020; v1 submitted 13 March, 2020; originally announced March 2020.

Comments: Accepted for publication in IEEE Transactions on Microwave Theory and Techniques

5G New Radio Evolution Towards Sub-THz Communications

Authors: Oskari Tervo, Toni Levanen, Kari Pajukoski, Jari Hulkkonen, Pekka Wainio, Mikko Valkama

Abstract: In this paper, the potential of extending 5G New Radio physical layer solutions to support communications in sub-THz frequencies is studied. More specifically, we introduce the status of third generation partnership project studies related to operation on frequencies beyond 52.6 GHz and note also the recent proposal on spectrum horizons provided by federal communications commission (FCC) related t… ▽ More In this paper, the potential of extending 5G New Radio physical layer solutions to support communications in sub-THz frequencies is studied. More specifically, we introduce the status of third generation partnership project studies related to operation on frequencies beyond 52.6 GHz and note also the recent proposal on spectrum horizons provided by federal communications commission (FCC) related to experimental licenses on 95 GHz - 3 THz frequency band. Then, we review the power amplifier (PA) efficiency and output power challenge together with the increased phase noise (PN) distortion effect in terms of the supported waveforms. As a practical example on the waveform and numerology design from the perspective of the PN robustness, link performance results using 90 GHz carrier frequency are provided. The numerical results demonstrate that new, higher subcarrier spacings are required to support high throughput, which requires larger changes in the physical layer design. It is also observed that new phase-tracking reference signal designs are required to make the system robust against PN. The results illustrate that single-carrier frequency division multiple access is significantly more robust against PN and can provide clearly larger PA output power than cyclic-prefix orthogonal frequency division multiplexing, and is therefore a highly potential waveform for sub-THz communications. △ Less

Submitted 7 February, 2020; originally announced February 2020.

Comments: This manuscript has been accepted for publication to IEEE 6G Wireless Summit 2020, 6 pages, 4 figures

Novel Wake-up Scheme for Energy-Efficient Low-Latency Mobile Devices in 5G Networks

Authors: Soheil Rostami, Kari Heiska, Oleksandr Puchko, Kari Leppanen, Mikko Valkama

Abstract: Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control sig… ▽ More Improved mobile device battery lifetime and latency mini-mization are critical requirements for enhancing the mobile broadband services and user experience. Long-term evolution (LTE) networks have adopted discontinuous reception (DRX) as the baseline solution for prolonged battery lifetime. However, in every DRX cycle, the mobile device baseband processing unit monitors and decodes the control signaling, and thus all instances without any actual data allocation leads to unnecessary energy consumption. This fact together with the long start-up and power-down times can prevent adopting frequent wake-up instants, which in turn leads to considerable latency. In this work,a novel wake-up scheme is described and studied, to tackle the trade-off between latency and battery lifetime in future 5G networks, seeking thus to facilitate an always-available experience, rather than always-on. Analytical and simulation-based results show that the proposed scheme is a promising approach to control the user plane latency and energy consumption, when the device is operating in the power saving mode. The aim of this article is to describe the overall wake-up system operating principle and the associated signaling methods,receiver processing solutions and essential implementation aspects. Additionally, the advantages compared to DRX-based systems are shown and demonstrated, through the analysis of the system energy-efficiency and latency characteristics, with special emphasis on future 5G-grade mobile devices △ Less

Submitted 3 January, 2020; originally announced January 2020.

Mobile Communications Beyond 52.6 GHz: Waveforms, Numerology, and Phase Noise Challenge

Authors: Toni Levanen, Oskari Tervo, Kari Pajukoski, Markku Renfors, Mikko Valkama

Abstract: In this article, the first considerations for the 5G New Radio (NR) physical layer evolution to support beyond 52.6GHz communications are provided. In addition, the performance of both OFDM based and DFT-s-OFDM based networks are evaluated with special emphasis on the phase noise (PN) induced distortion. It is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15 assumptions, name… ▽ More In this article, the first considerations for the 5G New Radio (NR) physical layer evolution to support beyond 52.6GHz communications are provided. In addition, the performance of both OFDM based and DFT-s-OFDM based networks are evaluated with special emphasis on the phase noise (PN) induced distortion. It is shown that DFT-s-OFDM is more robust against PN under 5G NR Release 15 assumptions, namely regarding the supported phase tracking reference signal (PTRS) designs, since it enables more effective PN mitigation directly in the time domain. To further improve the PN compensation capabilities, the PTRS design for DFT-s-OFDM is revised, while for the OFDM waveform a novel block PTRS structure is introduced, providing similar link performance as DFT-s-OFDM with enhanced PTRS design. We demonstrate that the existing 5G NR Release 15 solutions can be extended to support efficient mobile communications at 60GHz carrier frequency with the enhanced PTRS structures. In addition, DFT-s-OFDM based downlink for user data could be considered for beyond 52.6GHz communications to further improve system power efficiency and performance with higher order modulation and coding schemes. Finally, network link budget and cell size considerations are provided, showing that at certain bands with specific transmit power regulation, the cell size can eventually be downlink limited. △ Less

Submitted 8 May, 2020; v1 submitted 19 December, 2019; originally announced December 2019.

Comments: This manuscript has been submitted to IEEE Wireless Communications Magazine (WCM). 8 pages, 4 figures, and 2 tables

PAPR Reduction with Mixed-Numerology OFDM

Authors: Selahattin Gökceli, Toni Levanen, Juha Yli-Kaakinen, Taneli Riihonen, Markku Renfors, Mikko Valkama

Abstract: High peak-to-average power ratio (PAPR) is a critical problem in orthogonal frequency-division multiplexing (OFDM). The fifth-generation New Radio (5G NR) facilitates the utilization of multiple heterogeneous bandwidth parts (BWPs), which complicates the PAPR problem even further and introduces inter-numerology interference (INI) between the BWPs. This paper proposes two novel schemes to reduce th… ▽ More High peak-to-average power ratio (PAPR) is a critical problem in orthogonal frequency-division multiplexing (OFDM). The fifth-generation New Radio (5G NR) facilitates the utilization of multiple heterogeneous bandwidth parts (BWPs), which complicates the PAPR problem even further and introduces inter-numerology interference (INI) between the BWPs. This paper proposes two novel schemes to reduce the PAPR of mixed-numerology OFDM signals. The first scheme is an original enhanced iterative clipping-and-error-filtering (ICEF) approach that cancels efficiently the INI along with PAPR reduction. This allows to achieve efficient PAPR reduction while being compatible with well-known windowed overlap-and-add (WOLA) processing. The second scheme is based on fast-convolution (FC) processing, where PAPR reduction is embedded in the FC filtering carried out using overlapping processing blocks. This allows one to use any existing block-wise PAPR reduction method to reduce the composite signals' PAPR with arbitrary BWP waveforms, and it is thus especially well suited for processing mixed-numerology composite waveforms carrying multiple BWPs with different OFDM numerologies. The performance of the proposed algorithms is evaluated in the 5G NR context, and the essential performance advantages are demonstrated and quantified. △ Less

Submitted 5 September, 2019; originally announced September 2019.

Comments: Accepted for publication as a Letter in the IEEE Wireless Communications Letters in September 2019. This is the revised version of original manuscript, and it is in press at the moment

Full-Duplex OFDM Radar With LTE and 5G NR Waveforms: Challenges, Solutions, and Measurements

Authors: Carlos Baquero Barneto, Taneli Riihonen, Matias Turunen, Lauri Anttila, Marko Fleischer, Kari Stadius, Jussi Ryynänen, Mikko Valkama

Abstract: This paper studies the processing principles, implementation challenges, and performance of OFDM-based radars, with particular focus on the fourth-generation Long-Term Evolution (LTE) and fifth-generation (5G) New Radio (NR) mobile networks' base stations and their utilization for radar/sensing purposes. First, we address the problem stemming from the unused subcarriers within the LTE and NR trans… ▽ More This paper studies the processing principles, implementation challenges, and performance of OFDM-based radars, with particular focus on the fourth-generation Long-Term Evolution (LTE) and fifth-generation (5G) New Radio (NR) mobile networks' base stations and their utilization for radar/sensing purposes. First, we address the problem stemming from the unused subcarriers within the LTE and NR transmit signal passbands, and their impact on frequency-domain radar processing. Particularly, we formulate and adopt a computationally efficient interpolation approach to mitigate the effects of such empty subcarriers in the radar processing. We evaluate the target detection and the corresponding range and velocity estimation performance through computer simulations, and show that high-quality target detection as well as high-precision range and velocity estimation can be achieved. Especially 5G NR waveforms, through their impressive channel bandwidths and configurable subcarrier spacing, are shown to provide very good radar/sensing performance. Then, a fundamental implementation challenge of transmitter-receiver (TX-RX) isolation in OFDM radars is addressed, with specific emphasis on shared-antenna cases, where the TX-RX isolation challenges are the largest. It is confirmed that from the OFDM radar processing perspective, limited TX-RX isolation is primarily a concern in detection of static targets while moving targets are inherently more robust to transmitter self-interference. Properly tailored analog/RF and digital self-interference cancellation solutions for OFDM radars are also described and implemented, and shown through RF measurements to be key technical ingredients for practical deployments, particularly from static and slowly moving targets' point of view. △ Less

Submitted 9 August, 2019; originally announced August 2019.

Comments: Paper accepted by IEEE Transactions on Microwave Theory and Techniques

On Antenna Array Out-of-Band Emissions

Authors: Lauri Anttila, Alberto Brihuega, Mikko Valkama

Abstract: We substantiate and extend recent research on the behavior of the out-of-band emissions in antenna array transmitters. Specifically, with multi-user precoding, we show that the emissions are always beamformed in the directions of the intended receivers, contrary to some claims in the recent literature. Moreover, while also other spurious directions exist, we show that the emissions are always stro… ▽ More We substantiate and extend recent research on the behavior of the out-of-band emissions in antenna array transmitters. Specifically, with multi-user precoding, we show that the emissions are always beamformed in the directions of the intended receivers, contrary to some claims in the recent literature. Moreover, while also other spurious directions exist, we show that the emissions are always strongest in the directions of the intended receivers. We also show that power amplifiers with mutually different nonlinear phase characteristics will reduce the beamforming gain of the unwanted emissions, with the gain approaching the noncoherent combining limit as the phase deviations are increased. △ Less

Submitted 8 August, 2019; originally announced August 2019.

Comments: Accepted for publication in IEEE Wireless Communications Letters

Linearizing Active Antenna Arrays: Method and Measurements

Authors: Alberto Brihuega, Mahmoud Abdelaziz, Matias Turunen, Thomas Eriksson, Lauri Anttila, Mikko Valkama

Abstract: In this paper, we provide a novel framework for efficient digital predistortion (DPD) based linearization of active antenna arrays with multiple and mutually different nonlinear power amplifiers. The proposed method builds on the use of a combined feedback signal essentially characterizing the observable nonlinear distortion at the receiving end. The proposed method is validated with extensive ove… ▽ More In this paper, we provide a novel framework for efficient digital predistortion (DPD) based linearization of active antenna arrays with multiple and mutually different nonlinear power amplifiers. The proposed method builds on the use of a combined feedback signal essentially characterizing the observable nonlinear distortion at the receiving end. The proposed method is validated with extensive over-the-air RF measurements on a 64-element active antenna array transmitter operating at 28 GHz carrier frequency and transmitting a 200 MHz wide 5G New Radio (NR) waveform. The obtained results demonstrate the excellent linearization capabilities of the proposed solution, which allows for a very efficient implementation in practical systems. △ Less

Submitted 18 July, 2019; originally announced July 2019.

Comments: Accepted for presentation in IEEE MTT-S International Microwave Conference on Hardware and Systems for 5G and Beyond, August 2019

Gradient-Adaptive Spline-Interpolated LUT Methods for Low-Complexity Digital Predistortion

Authors: Pablo Pascual Campo, Alberto Brihuega, Lauri Anttila, Matias Turunen, Dani Korpi, Markus Allén, Mikko Valkama

Abstract: In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse resp… ▽ More In this paper, new digital predistortion (DPD) solutions for power amplifier (PA) linearization are proposed, with particular emphasis on reduced processing complexity in future 5G and beyond wideband radio systems. The first proposed method, referred to as the spline-based Hammerstein (SPH) approach, builds on complex spline-interpolated lookup table (LUT) followed by a linear finite impulse response (FIR) filter. The second proposed method, the spline-based memory polynomial (SMP) approach, contains multiple parallel complex spline-interpolated LUTs together with an input delay line such that more versatile memory modeling can be achieved. For both structures, gradient-based learning algorithms are derived to efficiently estimate the LUT control points and other related DPD parameters. Large set of experimental results are provided, with specific focus on 5G New Radio (NR) systems, showing successful linearization of multiple sub-6 GHz PA samples as well as a 28 GHz active antenna array, incorporating channel bandwidths up to 200 MHz. Explicit performance-complexity comparisons are also reported between the SPH and SMP DPD systems and the widely-applied ordinary memory-polynomial (MP) DPD solution. The results show that the linearization capabilities of the proposed methods are very close to that of the ordinary MP DPD, particularly with the proposed SMP approach, while having substantially lower processing complexity. △ Less

Submitted 2 July, 2020; v1 submitted 4 July, 2019; originally announced July 2019.

Comments: The manuscript has 14 pages, 19 figures

Positioning and Location-Aware Communications for Modern Railways with 5G New Radio

Authors: Jukka Talvitie, Toni Levanen, Mike Koivisto, Tero Ihalainen, Kari Pajukoski, Mikko Valkama

Abstract: Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient… ▽ More Providing high-capacity radio connectivity for high-speed trains (HSTs) is one of the most important use cases of emerging 5G New Radio (NR) networks. In this article, we show that 5G NR technology can also facilitate high-accuracy continuous localization and tracking of HSTs. Furthermore, we describe and demonstrate how the NR network can utilize the continuous location information for efficient beam-management and beamforming, as well as for downlink Doppler precompensation in the single-frequency network context. Additionally, with particular focus on millimeter wave networks, novel concepts for low-latency intercarrier interference (ICI) estimation and compensation, due to residual Doppler and oscillator phase noise, are described and demonstrated. The provided numerical results at 30 GHz operating band show that sub-meter positioning and sub-degree beam-direction accuracies can be obtained with very high probabilities in the order of 95-99%. The results also show that the described Doppler precompensation and ICI estimation and cancellation methods substantially improve the throughput of the single-frequency HST network. △ Less

Submitted 6 May, 2019; v1 submitted 29 April, 2019; originally announced May 2019.

Comments: This article has been submitted to IEEE Communications Magazine for a publication. This is the first revised version of the original article and is now under second review round

Digital Predistortion for Multiuser Hybrid MIMO at mmWaves

Authors: Alberto Brihuega, Lauri Anttila, Mahmoud Abdelaziz, Fredrik Tufvesson, Mikko Valkama

Abstract: Efficient mitigation of power amplifier (PA) nonlinear distortion in multi-user hybrid precoding based broadband mmWave systems is an open research problem. In this article, we first carry out detailed signal and distortion modeling in broadband multi-user hybrid MIMO systems, with a bank of nonlinear PAs in each subarray, while also take the inevitable crosstalk between the antenna/PA branches in… ▽ More Efficient mitigation of power amplifier (PA) nonlinear distortion in multi-user hybrid precoding based broadband mmWave systems is an open research problem. In this article, we first carry out detailed signal and distortion modeling in broadband multi-user hybrid MIMO systems, with a bank of nonlinear PAs in each subarray, while also take the inevitable crosstalk between the antenna/PA branches into account. Building on the derived models, we then propose an efficient closed-loop (CL) digital predistortion (DPD) solution that requires only a single-input DPD unit per transmit chain or subarray, despite crosstalk, providing substantial complexity-benefit compared to the state-of-the art multi-dimensional DPD solutions. We show that under spatially correlated multipath propagation, each DPD unit can provide linearization towards every intended user, or more generally, towards all spatial directions where coherent propagation is taking place, and that the proposed CL DPD system is robust against crosstalk}. Extensive numerical results building on practical measurement-based mmWave PA models are provided, demonstrating and verifying the excellent linearization performance of the proposed DPD system in different evaluation scenarios. △ Less

Submitted 18 May, 2020; v1 submitted 22 March, 2019; originally announced March 2019.

Comments: final version of the article; accepted for publication in IEEE Transactions on Signal Processing

Frequency-Selective PAPR Reduction for OFDM

Authors: Selahattin Gökceli, Toni Levanen, Taneli Riihonen, Markku Renfors, Mikko Valkama

Abstract: We study the peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing (OFDM) systems. In conventional clipping and filtering based PAPR reduction techniques, clipping noise is allowed to spread over the whole active passband, thus degrading the transmit signal quality similarly at all active subcarriers. However, since modern radio networks support frequency-multipl… ▽ More We study the peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing (OFDM) systems. In conventional clipping and filtering based PAPR reduction techniques, clipping noise is allowed to spread over the whole active passband, thus degrading the transmit signal quality similarly at all active subcarriers. However, since modern radio networks support frequency-multiplexing of users and services with highly different quality-of-service expectations, clipping noise from PAPR reduction should be distributed unequally over the corresponding physical resource blocks (PRBs). To facilitate this, we present an efficient PAPR reduction technique, where clipping noise can be flexibly controlled and filtered inside the transmitter passband, allowing to control the transmitted signal quality per PRB. Numerical results are provided in 5G New Radio (NR) mobile network context, demonstrating the flexibility and efficiency of the proposed method. △ Less

Submitted 1 April, 2019; v1 submitted 20 February, 2019; originally announced February 2019.

Comments: Accepted for publication as a Correspondence in the IEEE Transactions on Vehicular Technology in March 2019. This is the revised version of original manuscript, and it is in press at the moment

Digital Cancellation of Passive Intermodulation in FDD Transceivers

Authors: Muhammad Zeeshan Waheed, Pablo Pascual Campo, Dani Korpi, Adnan Kiayani, Lauri Anttila, Mikko Valkama

Abstract: Modern radio systems and transceivers utilize carrier aggregation (CA) to meet the demands for higher and higher data rates. However, the adoption of CA in the existing Long Term Evolution (LTE)-Advanced and emerging 5G New Radio (NR) mobile networks, in case of frequency division duplexing (FDD), may incur self-interference challenges with certain band combinations. More specifically, the nonline… ▽ More Modern radio systems and transceivers utilize carrier aggregation (CA) to meet the demands for higher and higher data rates. However, the adoption of CA in the existing Long Term Evolution (LTE)-Advanced and emerging 5G New Radio (NR) mobile networks, in case of frequency division duplexing (FDD), may incur self-interference challenges with certain band combinations. More specifically, the nonlinear distortion products of the transmit signals or component carriers (CCs), stemming from the passive radio frequency (RF) front-end components of the transceiver, can appear in one or more of the configured receiver bands, potentially leading to the receiver desensitization. In this paper, we present advanced baseband equivalent signal models for such passive intermodulation (PIM) distortion viewed from the RX point of view, considering also potential memory effects in the PIM generation. Then, building on these signal models, a digital self-interference cancellation technique operating in the transceiver digital front-end is presented. The performance of the proposed solution is evaluated with real-life RF measurements for LTE-Advanced type user equipment (UE) with dual CC inter-band CA, demonstrating excellent suppression properties. The findings in this work indicate that digital cancellation is a feasible approach for improving the receiver sensitivity of mobile devices that may be prone to RF front-end induced PIM challenges. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: 7 pages, 7 figures, accepted to 2018 Asilomar Conference on Signals, Systems, and Computers

Digital Predistortion in Large-Array Digital Beamforming Transmitters

Authors: Alberto Brihuega, Lauri Anttila, Mahmoud Abdelaziz, Mikko Valkama

Abstract: In this article, we propose a novel digital predistortion (DPD) solution that allows to considerably reduce the complexity resulting from linearizing a set of power amplifiers (PAs) in single-user large-scale digital beamforming transmitters. In contrast to current state-of-the art solutions that assume a dedicated DPD per power amplifier, which is unfeasible in the context of large antenna arrays… ▽ More In this article, we propose a novel digital predistortion (DPD) solution that allows to considerably reduce the complexity resulting from linearizing a set of power amplifiers (PAs) in single-user large-scale digital beamforming transmitters. In contrast to current state-of-the art solutions that assume a dedicated DPD per power amplifier, which is unfeasible in the context of large antenna arrays, the proposed solution only requires a single DPD in order to linearize an arbitrary number of power amplifiers. To this end, the proposed DPD predistorts the signal at the input of the digital precoder based on minimizing the nonlinear distortion of the combined signal at the intended receiver direction. This is a desirable feature, since the resulting emissions in other directions get partially diluted due to less coherent superposition. With this approach, only a single DPD is required, yielding great complexity and energy savings. △ Less

Submitted 4 December, 2018; originally announced December 2018.

Comments: 8 pages, Accepted for publication in Asilomar Conference on Signals, Systems, and Computers