Showing 1–7 of 7 results for author: Tuladhar, S

A study of uncompensated latency in ADS-B reports

Authors: Michelle George, Saurav Tuladhar, Siva Sivananthan

Abstract: The total latency (TL) in ADS-B is the difference between the true TOA of the original position measured by the onboard GPS and the TOA in the ADS-B report at the GS. We processed the ADS-B reports extracted from live-data recorded at the Chicago to produce the results in this report. We observed that 99% of aircraft in our data set were broadcasting in non-UTC coupled mode. For these aircraft, ST… ▽ More The total latency (TL) in ADS-B is the difference between the true TOA of the original position measured by the onboard GPS and the TOA in the ADS-B report at the GS. We processed the ADS-B reports extracted from live-data recorded at the Chicago to produce the results in this report. We observed that 99% of aircraft in our data set were broadcasting in non-UTC coupled mode. For these aircraft, STARS exclusively used ADS-B reports to update tracks when available. The calculated ULs for the non-UTC coupled ADS-B reports were well within the budget (-200 ms to +400 ms) allowed by the DO-260B MOPS. Moreover, the mean latencies from both methods were less than +/-50 ms. The latencies obtained from the MTPES method were observed to be in close agreement with the means from the ATPE method. About 1% of aircraft were broadcasting in UTC coupled mode. The reports from these aircraft were identified to have a non-compliant link version, causing STARS to reject these reports for tracking. Moreover, the reported position and TOA were found to be unsynchronized, which conflicts with the MOPS requirement for UTC coupled operation. △ Less

Submitted 14 August, 2020; originally announced August 2020.

Comments: 7 pages, for IEEE Transactions on Vehicular Technology

Random Matrix Theory Model for Mean Notch Depth of the Diagonally Loaded MVDR Beamformer for a Single Interferer Case

Authors: Saurav R Tuladhar, John R Buck, Kathleen E Wage

Abstract: Adaptive beamformers (ABFs) suppress interferers by placing a notch in the beampattern at the interferer direction. This suppres- sion improves detection of a weaker signals in the presence of strong interferers. Hence the notch depth plays a crucial role in determining the adaptive gain obtained from using ABF over conventional beam- forming. This research derives models for the mean notch depth… ▽ More Adaptive beamformers (ABFs) suppress interferers by placing a notch in the beampattern at the interferer direction. This suppres- sion improves detection of a weaker signals in the presence of strong interferers. Hence the notch depth plays a crucial role in determining the adaptive gain obtained from using ABF over conventional beam- forming. This research derives models for the mean notch depth of a diagonally loaded MVDR ABF for a single interferer case. The model describes the mean notch depth as a function of number of snapshots, the number of sensors in the array, the interferer to noise ratio (INR) level, the interferer direction and the diagonal loading level. The derivation uses random matrix theory results on the be- havior of the eigenvectors of sample covariance matrix. The notch depth predicted by the model is shown to be in close agreement with simulation results over a range of INRs and snapshots. △ Less

Submitted 24 August, 2018; originally announced August 2018.

Predicting passenger loading level on a train car: A Bayesian approach

Authors: Peter Khomchuk, Saurav R Tuladhar, Siva Sivananthan

Abstract: Crowding in train cars is increasingly a major concern for transit agencies. From the perspective of the passengers and the transit agencies, overcrowding of the train cars has several negative consequences such as: (i) extended duration of passengers boarding and alighting which leads to longer dwell times, (ii) subsequent disruption of the headway and the schedule, and (iii) passenger dissatisfa… ▽ More Crowding in train cars is increasingly a major concern for transit agencies. From the perspective of the passengers and the transit agencies, overcrowding of the train cars has several negative consequences such as: (i) extended duration of passengers boarding and alighting which leads to longer dwell times, (ii) subsequent disruption of the headway and the schedule, and (iii) passenger dissatisfaction (e.g. increased stress and lack of privacy). Moreover, overcrowding during peak service hours also indicates inadequate infrastructure to meet the passenger demands. Realizing the importance of the crowding issue, transit agencies have developed measures to assess the crowding levels. The Transit Capacity and Quality of Service Manual provides guidelines on thresholds for crowding in transit systems in the United States. △ Less

Submitted 1 August, 2018; originally announced August 2018.

Comments: Work supported by Phase I SBIR grant from the Volpe National Transportation Systems Center

Estimating Passenger Loading on Train Cars Using Accelerometer

Authors: Saurav R Tuladhar, Peter Khomchuk, Siva Sivananthan

Abstract: Crowding on train cars is a common problem plaguing the major public transit agencies around the world. On one hand a crowded train car presents a negative experience for the passengers, while on the other hand it indicated inefficiencies in the train system. The Federal Transit Agency is interested in reducing the crowding level on public transit train cars. Automatic passenger counters (APC) are… ▽ More Crowding on train cars is a common problem plaguing the major public transit agencies around the world. On one hand a crowded train car presents a negative experience for the passengers, while on the other hand it indicated inefficiencies in the train system. The Federal Transit Agency is interested in reducing the crowding level on public transit train cars. Automatic passenger counters (APC) are commonly used to count the passengers boarding and alighting the train cars. Advanced APC solutions are available based on EO/IR sensors and visual object detection technology, but are considerably expensive for large scale deployment. This report discusses a low-cost approach to APC by using accelerometer measurements from train car to estimate approximate passenger loading. Accelerometer sensor can measure train car vibration as the train moves along the rail tracks. The train car vibration changes with the passenger loading on the car. Detecting this change in vibration pattern with changing passenger loading level is key to the accelerometer based APC solution. Moreover, accelerometer sensors present a low-cost APC solution compared to existing EO/IR based APCs. This work presents a (i) theoretical model analysis (ii) experimental data driven approach to demonstrate the feasibility of using accelerometer for passenger loading estimation. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Comments: Work performed under Phase I SBIR grant DTRT5717C10231 from the Volpe National Transportation Systems Center, US Department of Transportation

Unit circle rectification of the MVDR beamformer

Authors: Saurav R Tuladhar, John R Buck

Abstract: The sample matrix inversion (SMI) beamformer implements Capon's minimum variance distortionless (MVDR) beamforming using the sample covariance matrix (SCM). In a snapshot limited environment, the SCM is poorly conditioned resulting in a suboptimal performance from the SMI beamformer. Imposing structural constraints on the SCM estimate to satisfy known theoretical properties of the ensemble MVDR be… ▽ More The sample matrix inversion (SMI) beamformer implements Capon's minimum variance distortionless (MVDR) beamforming using the sample covariance matrix (SCM). In a snapshot limited environment, the SCM is poorly conditioned resulting in a suboptimal performance from the SMI beamformer. Imposing structural constraints on the SCM estimate to satisfy known theoretical properties of the ensemble MVDR beamformer mitigates the impact of limited snapshots on the SMI beamformer performance. Toeplitz rectification and bounding the norm of weight vector are common approaches for such constrains. This paper proposes the unit circle rectification technique which constraints the SMI beamformer to satisfy a property of the ensemble MVDR beamformer: for narrowband planewave beamforming on a uniform linear array, the zeros of the MVDR weight array polynomial must fall on the unit circle. Numerical simulations show that the resulting unit circle MVDR (UC MVDR) beamformer frequently improves the suppression of both discrete interferers and white background noise compared to the classic SMI beamformer. Moreover, the UC MVDR beamformer is shown to suppress discrete interferers better than the MVDR beamformer diagonally loaded to maximize the SINR. △ Less

Submitted 30 June, 2018; originally announced July 2018.

Comments: Submitted to IEEE Journal of Oceanic Engineering

Unit circle MVDR beamformer

Authors: Saurav R Tuladhar, John R Buck

Abstract: The array polynomial is the z-transform of the array weights for a narrowband planewave beamformer using a uniform linear array (ULA). Evaluating the array polynomial on the unit circle in the complex plane yields the beampattern. The locations of the polynomial zeros on the unit circle indicate the nulls of the beampattern. For planewave signals measured with a ULA, the locations of the ensemble… ▽ More The array polynomial is the z-transform of the array weights for a narrowband planewave beamformer using a uniform linear array (ULA). Evaluating the array polynomial on the unit circle in the complex plane yields the beampattern. The locations of the polynomial zeros on the unit circle indicate the nulls of the beampattern. For planewave signals measured with a ULA, the locations of the ensemble MVDR polynomial zeros are constrained on the unit circle. However, sample matrix inversion (SMI) MVDR polynomial zeros generally do not fall on the unit circle. The proposed unit circle MVDR (UC MVDR) projects the zeros of the SMI MVDR polynomial radially on the unit circle. This satisfies the constraint on the zeros of ensemble MVDR polynomial. Numerical simulations show that the UC MVDR beamformer suppresses interferers better than the SMI MVDR and the diagonal loaded MVDR beamformer and also improves the white noise gain (WNG). △ Less

Submitted 6 November, 2016; originally announced November 2016.

Comments: Accepted to ICASSP 2015

Approximate eigenvalue distribution of a cylindrically isotropic noise sample covariance matrix

Authors: Saurav R. Tuladhar, John R. Buck

Abstract: The statistical behavior of the eigenvalues of the sample covariance matrix (SCM) plays a key role in determining the performance of adaptive beamformers (ABF) in presence of noise. This paper presents a method to compute the approximate eigenvalue density function (EDF) for the SCM of a \cin{} field when only a finite number of shapshots are available. The EDF of the ensemble covariance matrix (E… ▽ More The statistical behavior of the eigenvalues of the sample covariance matrix (SCM) plays a key role in determining the performance of adaptive beamformers (ABF) in presence of noise. This paper presents a method to compute the approximate eigenvalue density function (EDF) for the SCM of a \cin{} field when only a finite number of shapshots are available. The EDF of the ensemble covariance matrix (ECM) is modeled as an atomic density with many fewer atoms than the SCM size. The model results in substantial computational savings over more direct methods of computing the EDF. The approximate EDF obtained from this method agrees closely with histograms of eigenvalues obtained from simulation. △ Less

Submitted 26 October, 2016; originally announced October 2016.

Comments: Accepted to IEEE Statistical Signal Processing Workshop 2012

Journal ref: IEEE Stat.Sig.Proc.Wshp (2012), 824-827