-
Fair and Energy-Efficient Activation Control Mechanisms for Repeater-Assisted Massive MIMO
Authors:
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
Massive multiple-input multiple-output (mMIMO) has been the core of 5G due to its ability to improve spectral efficiency and spatial multiplexing significantly; however, cell-edge users still experience performance degradation due to inter-cell interference and uneven signal distribution. While cell-free mMIMO (cfmMIMO) addresses this issue by providing uniform coverage through distributed antenna…
▽ More
Massive multiple-input multiple-output (mMIMO) has been the core of 5G due to its ability to improve spectral efficiency and spatial multiplexing significantly; however, cell-edge users still experience performance degradation due to inter-cell interference and uneven signal distribution. While cell-free mMIMO (cfmMIMO) addresses this issue by providing uniform coverage through distributed antennas, it requires significantly more deployment cost due to the fronthaul and tight synchronization requirements. Alternatively, repeater-assisted massive MIMO (RA-MIMO) has recently been proposed to extend the coverage of cellular mMIMO by densely deploying low-cost single-antenna repeaters capable of amplifying and forwarding signals. In this work, we investigate amplification control for the repeaters for two different goals: (i) providing a fair performance among users, and (ii) reducing the extra energy consumption by the deployed repeaters. We propose a max-min amplification control algorithm using the convex-concave procedure for fairness and a joint sleep mode and amplification control algorithm for energy efficiency, comparing long- and short-term strategies. Numerical results show that RA-MIMO, with maximum amplification, improves signal-to-interference-plus-noise ratio (SINR) by over 20 dB compared to mMIMO and performs within 1 dB of cfmMIMO when deploying the same number of repeaters as access points in cfmMIMO. Additionally, our majority-rule-based long-term sleep mechanism reduces repeater power consumption by 70% while maintaining less than 1% spectral efficiency outage.
△ Less
Submitted 4 April, 2025;
originally announced April 2025.
-
UAV-Based Cell-Free Massive MIMO: Joint Placement and Power Optimization under Fronthaul Capacity Limitations
Authors:
Neetu R. R,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar,
Gourab Ghatak,
Vivek Ashok Bohara
Abstract:
We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage by jointly serving user equipments (UEs) with out predefined cell boundaries. However, high-capacity wireless networks face significant challenges due to fronth…
▽ More
We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage by jointly serving user equipments (UEs) with out predefined cell boundaries. However, high-capacity wireless networks face significant challenges due to fronthaul limitations in UAV-assisted architectures. This letter proposes a novel UAV-based cell-free mMIMO framework that leverages distributed UAV-APs to serve UEs while addressing the capacity constraints of wireless fronthaul links. We evaluate functional split Options 7.2 and 8 for the fronthaul links, aiming to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among the UEs and minimize the power consumption by optimizing the transmit powers of UAV-APs and selectively activating them. Our analysis compares sub-6 GHz and millimeter wave (mmWave) bands for the fronthaul, showing that mmWave achieves superior SINR with lower power consumption, particularly under Option 8. Additionally, we determine the minimum fronthaul bandwidth required to activate a single UAV-AP under different split options.
△ Less
Submitted 7 February, 2025;
originally announced February 2025.
-
Detecting Unauthorized Drones with Cell-Free Integrated Sensing and Communication
Authors:
Xinyue Li,
Zinat Behdad,
Ozan Alp Topal,
Ozlem Tugfe Demir,
Cicek Cavdar
Abstract:
Integrated sensing and communication (ISAC) boosts network efficiency by using existing resources for diverse sensing applications. In this work, we propose a cell-free massive MIMO (multiple-input multiple-output)-ISAC framework to detect unauthorized drones while simultaneously ensuring communication requirements. We develop a detector to identify passive aerial targets by analyzing signals from…
▽ More
Integrated sensing and communication (ISAC) boosts network efficiency by using existing resources for diverse sensing applications. In this work, we propose a cell-free massive MIMO (multiple-input multiple-output)-ISAC framework to detect unauthorized drones while simultaneously ensuring communication requirements. We develop a detector to identify passive aerial targets by analyzing signals from distributed access points (APs). In addition to the precision of the sensing, timeliness of the sensing information is also crucial due to the risk of drones leaving the area before the sensing procedure is finished. We introduce the age of sensing (AoS) and sensing coverage as our sensing performance metrics and propose a joint sensing blocklength and power optimization algorithm to minimize AoS and maximize sensing coverage while meeting communication requirements. Moreover, we propose an adaptive weight selection algorithm based on concave-convex procedure to balance the inherent trade-off between AoS and sensing coverage. Our numerical results show that increasing the communication requirements would significantly reduce both the sensing coverage and the timeliness of the sensing. Furthermore, the proposed adaptive weight selection algorithm can provide high sensing coverage and reduce the AoS by 45% compared to the fixed weights, demonstrating efficient utilization of both power and sensing blocklength.
△ Less
Submitted 25 January, 2025;
originally announced January 2025.
-
Energy-Efficient Cell-Free Massive MIMO with Wireless Fronthaul
Authors:
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to i…
▽ More
Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to increased deployment cost and power consumption for fronthaul signaling and processing. To overcome these challenges, in this work, we consider wireless fronthaul connections and propose a joint antenna activation and power allocation algorithm to minimize the end-to-end (from radio to cloud) power while satisfying the quality-of-service requirements of the UEs under wireless fronthaul capacity limitations. The results demonstrate that the proposed methodology of deactivating antennas at each AP reduces the power consumption by 50% and 84% compared to the benchmarks based on shutting down APs and minimizing only the transmit power, respectively.
△ Less
Submitted 3 December, 2024;
originally announced December 2024.
-
Communicate or Sense? AP Mode Selection in mmWave Cell-Free Massive MIMO-ISAC
Authors:
Weixian Yan,
Ozan Alp Topal,
Zinat Behdad,
Ozlem Tugfe Demir,
Cicek Cavdar
Abstract:
Integrated sensing and communication (ISAC) is a promising technology for future mobile networks, enabling sensing applications to be performed by existing communication networks, consequently improving the system efficiency. Millimeter wave (mmWave) signals provide high sensing resolution and high data rate but suffer from sensitivity to blockage. Cell-free massive multiple-input multiple-output…
▽ More
Integrated sensing and communication (ISAC) is a promising technology for future mobile networks, enabling sensing applications to be performed by existing communication networks, consequently improving the system efficiency. Millimeter wave (mmWave) signals provide high sensing resolution and high data rate but suffer from sensitivity to blockage. Cell-free massive multiple-input multiple-output (MIMO), with a large number of distributed access points (APs), can overcome this challenge by providing macro diversity against changing blockages and can save energy consumption by deactivating unfavorable APs. Thus, in this work, we propose a joint dynamic AP mode selection and power allocation scheme for mmWave cell-free massive MIMO-ISAC, where APs are assigned either as ISAC transmitters, sensing receivers, or shut down. Due to the large size of the original problem, we propose three different sub-optimal algorithms that minimize the number of active APs while guaranteeing the sensing and communication constraints. Numerical results demonstrate that assigning ISAC transmitters only satisfying communication constraints, followed up by sensing receiver assignment only for sensing constraint achieves the best performance-complexity balance.
△ Less
Submitted 3 December, 2024;
originally announced December 2024.
-
Multi-Target Integrated Sensing and Communications in Massive MIMO Systems
Authors:
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cramér-Rao lower bounds (CRLBs) for target directio…
▽ More
Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cramér-Rao lower bounds (CRLBs) for target direction-of-arrival estimates while meeting user equipment (UE) rate requirements. We propose several precoding schemes, comparing sensing performance and complexity, and find that sensing-focused precoding with power allocation for communication achieves near-optimal performance with 20 times less complexity than joint precoding. Additionally, time-sharing between communication and sensing outperforms simple time division, highlighting the benefits of resource-sharing for ISAC.
△ Less
Submitted 29 October, 2024;
originally announced October 2024.
-
Self-Sustainable Metasurface-Assisted mmWave Indoor Communication System
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In the design of a metasurface-assisted system for indoor environments, it is essential to take into account not only the performance gains and coverage extension provided by the metasurface but also the operating costs brought by its reconfigurability, such as powering and cabling. These costs can present challenges, particularly in indoor dense spaces (IDSs). A self-sustainable metasurface (SSM)…
▽ More
In the design of a metasurface-assisted system for indoor environments, it is essential to take into account not only the performance gains and coverage extension provided by the metasurface but also the operating costs brought by its reconfigurability, such as powering and cabling. These costs can present challenges, particularly in indoor dense spaces (IDSs). A self-sustainable metasurface (SSM), which retains reconfigurability unlike a static metasurface (SMS), achieves a lower operating cost than a reconfigurable intelligent surface (RIS) by being self-sustainable through power harvesting. In this paper, in order to find a better trade-off between metasurface gain, coverage, and operating cost, the design and performance of an SSM-assisted indoor mmWave communication system are investigated. We first simplify the design of the SSM-assisted system by considering the use of SSMs in a preset-based manner and the formation of coverage groups by associating SSMs with the closest user equipments (UEs). We propose a two-stage iterative algorithm to maximize the minimum data rate in the system by jointly deciding the association between the UEs and the SSMs, the phase-shifts of the SSMs, and allocating time resources for each UE. The non-convexities that exist in the proposed optimization problem are tackled using the feasible point pursuit successive convex approximation method and the concave-convex procedure. To understand the best scenario for using SSM, the resulting performance is compared with that achieved with RIS and SMS. Our numerical results indicate that SSMs are best utilized in a small environment where self-sustainability is easier to achieve when the budget for operating costs is tight.
△ Less
Submitted 22 July, 2024;
originally announced July 2024.
-
Mixed Static and Reconfigurable Metasurface Deployment in Indoor Dense Spaces: How Much Reconfigurability is Needed?
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an…
▽ More
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an increased power, cabling, and signaling cost. To see how reconfigurability affects the network performance, we propose an iterative algorithm based on the feasible point pursuit successive convex approximation method. We jointly optimize the types and phase-shifts of the surfaces and the time portion allocated to each user equipment to maximize the minimum data rate achieved by the network. Our numerical results demonstrate that the minimum data rate improves as more RISs are introduced but the gain diminishes after some point. Therefore, introducing more reconfigurability is not always necessary. Another result shows that to reach the same data rate achieved by using 22 SMSs, at least 18 RISs are needed. This suggests that when it is costly to deploy many RISs, as an inexpensive alternative solution, one can reach the same data rate just by densely deploying more SMSs.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
mmWave Coverage Extension Using Reconfigurable Intelligent Surfaces in Indoor Dense Spaces
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose…
▽ More
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose a feasible point pursuit and successive convex approximation-based algorithm, which solves the problem by jointly selecting the RIS locations, optimizing the RIS phase-shifts, and allocating time resources to user equipments (UEs). The numerical results demonstrate substantial coverage extension by using at least four RISs, and a data rate of 130 Mbit/s is guaranteed for UEs in the considered area of an airplane cabin.
△ Less
Submitted 18 February, 2023;
originally announced February 2023.
-
Physical Layer Authentication for LEO Satellite Constellations
Authors:
Ozan Alp Topal,
Gunes Karabulut Kurt
Abstract:
Physical layer authentication (PLA) is the process of claiming identity of a node based on its physical layer characteristics such as channel fading or hardware imperfections. In this work, we propose a novel PLA method for the inter-satellite communication links (ISLs) of the LEO satellites. In the proposed PLA method, multiple receiving satellites validate the identity of the transmitter by comp…
▽ More
Physical layer authentication (PLA) is the process of claiming identity of a node based on its physical layer characteristics such as channel fading or hardware imperfections. In this work, we propose a novel PLA method for the inter-satellite communication links (ISLs) of the LEO satellites. In the proposed PLA method, multiple receiving satellites validate the identity of the transmitter by comparing the Doppler frequency measurements with the reference mobility information of the legitimate transmitter and then fuse their decision considering the selected decision rule. Analytical expressions are obtained for the spoofing detection probability and false alarm probability of the fusion methods. Numerically obtained high authentication performance results pave the way to a novel and easily integrable authentication mechanism for the LEO satellite networks.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Securing the Inter-Spacecraft Links: Physical Layer Key Generation from Doppler Frequency Shift
Authors:
Ozan Alp Topal,
Gunes Karabulut Kurt,
Halim Yanikomeroglu
Abstract:
In this work, we propose a secret key generation procedure specifically designed for the inter-spacecraft communication links. As a novel secrecy source, the spacecrafts utilize Doppler frequency shift based measurements. In this way, the mobilities of the communication devices are exploited to generate secret keys, where this resource can be utilized in the environments that the channel fading ba…
▽ More
In this work, we propose a secret key generation procedure specifically designed for the inter-spacecraft communication links. As a novel secrecy source, the spacecrafts utilize Doppler frequency shift based measurements. In this way, the mobilities of the communication devices are exploited to generate secret keys, where this resource can be utilized in the environments that the channel fading based key generation methods are not available. The mobility of a spacecraft is modeled as the superposition of a pre-determined component and a dynamic component. We derive the maximum achievable secret key generation rate from the Doppler frequency shift. The proposed secret key generation procedure extracts the Doppler frequency shift in the form of nominal power spectral density samples (NPSDS). We propose a maximum-likelihood (ML) estimation for the NPSDS at the spacecrafts, then a uniform quantizer is utilized to obtain secret key bits. The key disagreement rate (KDR) is analytically obtained for the proposed key generation procedure. Through numerical studies, the tightness of the provided approximations is shown. Both the theoretical and numerical results demonstrate the validity and the practicality of the presented physical layer key generation procedure considering the security of the communication links of spacecrafts.
△ Less
Submitted 4 May, 2021;
originally announced May 2021.
-
An Adaptive Multi-Agent Physical Layer Security Framework for Cognitive Cyber-Physical Systems
Authors:
Mehmet Özgün Demir,
Ozan Alp Topal,
Ali Emre Pusane,
Guido Dartmann,
Gerd Ascheid,
Güneş Karabulut Kurt
Abstract:
Being capable of sensing and behavioral adaptation in line with their changing environments, cognitive cyber-physical systems (CCPSs) are the new form of applications in future wireless networks. With the advancement of the machine learning algorithms, the transmission scheme providing the best performance can be utilized to sustain a reliable network of CCPS agents equipped with self-decision mec…
▽ More
Being capable of sensing and behavioral adaptation in line with their changing environments, cognitive cyber-physical systems (CCPSs) are the new form of applications in future wireless networks. With the advancement of the machine learning algorithms, the transmission scheme providing the best performance can be utilized to sustain a reliable network of CCPS agents equipped with self-decision mechanisms, where the interactions between each agent are modeled in terms of service quality, security, and cost dimensions. In this work, first, we provide network utility as a reliability metric, which is a weighted sum of the individual utility values of the CCPS agents. The individual utilities are calculated by mixing the quality of service (QoS), security, and cost dimensions with the proportions determined by the individualized user requirements. By changing the proportions, the CCPS network can be tuned for different applications of next-generation wireless networks. Then, we propose a secure transmission policy selection (STPS) mechanism that maximizes the network utility by using the Markov-decision process (MDP). In STPS, the CCPS network jointly selects the best performing physical layer security policy and the parameters of the selected secure transmission policy to adapt to the changing environmental effects. The proposed STPS is realized by reinforcement learning (RL), considering its real-time decision mechanism where agents can decide automatically the best utility providing policy in an altering environment.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Securing the Inter-Spacecraft Links: Doppler Frequency Shift based Physical Layer Key Generation
Authors:
Ozan Alp Topal,
Gunes Karabulut Kurt,
Halim Yanikomeroglu
Abstract:
We propose a novel physical layer secret key generation method for the inter-spacecraft communication links. By exploiting the Doppler frequency shifts of the reciprocal spacecraft links as a unique secrecy source, spacecrafts aim to obtain identical secret keys from their individual observations. We obtain theoretical expressions for the key disagreement rate (KDR). Using generalized Gauss-Laguer…
▽ More
We propose a novel physical layer secret key generation method for the inter-spacecraft communication links. By exploiting the Doppler frequency shifts of the reciprocal spacecraft links as a unique secrecy source, spacecrafts aim to obtain identical secret keys from their individual observations. We obtain theoretical expressions for the key disagreement rate (KDR). Using generalized Gauss-Laguerre quadrature, we derive closed form expressions for the KDR. Through numerical studies, the tightness of the provided approximations are shown. Both the theoretical and numerical results demonstrate the validity and the practicality of the presented physical layer key generation procedure considering the security of the communication links of spacecrafts.
△ Less
Submitted 31 August, 2020;
originally announced August 2020.
-
Identification of Smart Jammers: Learning based Approaches Using Wavelet Representation
Authors:
Ozan Alp Topal,
Selen Gecgel,
Ender Mete Eksioglu,
Gunes Karabulut Kurt
Abstract:
Smart jammer nodes can disrupt communication between a transmitter and a receiver in a wireless network, and they leave traces that are undetectable to classical jammer identification techniques, hidden in the time-frequency plane. These traces cannot be effectively identified through the use of the classical Fourier transform based time-frequency transformation (TFT) techniques with a fixed resol…
▽ More
Smart jammer nodes can disrupt communication between a transmitter and a receiver in a wireless network, and they leave traces that are undetectable to classical jammer identification techniques, hidden in the time-frequency plane. These traces cannot be effectively identified through the use of the classical Fourier transform based time-frequency transformation (TFT) techniques with a fixed resolution. Inspired by the adaptive resolution property provided by the wavelet transforms, in this paper, we propose a jammer identification methodology that includes a pre-processing step to obtain a multi-resolution image, followed by the use of a classifier. Support vector machine (SVM) and deep convolutional neural network (DCNN) architectures are investigated as classifiers to automatically extract the features of the transformed signals and to classify them. Three different jamming attacks are considered, the barrage jamming that targets the complete transmission bandwidth, the synchronization signal jamming attack that targets synchronization signals and the reference signal jamming attack that targets the reference signals in an LTE downlink transmission scenario. The performance of the proposed approach is compared with the classical Fourier transform based TFT techniques, demonstrating the efficacy of the proposed approach in the presence of smart jammers.
△ Less
Submitted 27 January, 2019;
originally announced January 2019.
