-
Wideband Cognitive Radio for Joint Communication and Sensing: Optimization of Subcarrier Allocation and beamforming
Authors:
Diluka Galappaththige,
Chintha Tellambura
Abstract:
As data traffic grows, wireless systems shift to higher frequency bands (6 GHz and above), where radar systems also operate. This coexistence demands effective interference management and efficient wideband utilization. Cognitive Radio (CR) offers a solution but remains limited to single-node or narrowband systems. This paper introduces a generalized wideband CR-enabled communication and sensing s…
▽ More
As data traffic grows, wireless systems shift to higher frequency bands (6 GHz and above), where radar systems also operate. This coexistence demands effective interference management and efficient wideband utilization. Cognitive Radio (CR) offers a solution but remains limited to single-node or narrowband systems. This paper introduces a generalized wideband CR-enabled communication and sensing system with multiple users and targets. We propose a communication and sensing sub-carrier allocations framework, followed by transmit beamforming for the primary communication BS and sensing signal design for the secondary radar BS. The goal is to maximize the communication sum rate while ensuring sensing requirements, minimizing interference, and adhering to power constraints. To solve the resulting non-convex problem, we develop a manifold optimization algorithm for communication-only sub-carriers and an alternating optimization approach using the generalized Rayleigh quotient and semidefinite relaxation for communication-sensing sub-carriers. Compared to a non-cooperative benchmark, the proposed system achieves a \qty{10}{\percent} gain in communication sum rate and a \qty{32}{\percent} gain in sensing sum rate with \num{12} BS antennas.
△ Less
Submitted 21 March, 2025;
originally announced March 2025.
-
Cell-Free Integrated Sensing and Communication: Principles, Advances, and Future Directions
Authors:
Diluka Galappaththige,
Mohammadali Mohammadi,
Gayan Aruma Baduge,
Chintha Tellambura
Abstract:
Cell-free (CF) integrated sensing and communication (ISAC) combines CF architecture with ISAC. CF employs distributed access points, eliminates cell boundaries, and enhances coverage, spectral efficiency, and reliability. ISAC unifies radar sensing and communication, enabling simultaneous data transmission and environmental sensing within shared spectral and hardware resources. CF-ISAC leverages t…
▽ More
Cell-free (CF) integrated sensing and communication (ISAC) combines CF architecture with ISAC. CF employs distributed access points, eliminates cell boundaries, and enhances coverage, spectral efficiency, and reliability. ISAC unifies radar sensing and communication, enabling simultaneous data transmission and environmental sensing within shared spectral and hardware resources. CF-ISAC leverages these strengths to improve spectral and energy efficiency while enhancing sensing in wireless networks. As a promising candidate for next-generation wireless systems, CF-ISAC supports robust multi-user communication, distributed multi-static sensing, and seamless resource optimization. However, a comprehensive survey on CF-ISAC has been lacking. This paper fills that gap by first revisiting CF and ISAC principles, covering cooperative transmission, radar cross-section, target parameter estimation, ISAC integration levels, sensing metrics, and applications. It then explores CF-ISAC systems, emphasizing their unique features and the benefits of multi-static sensing. State-of-the-art developments are categorized into performance analysis, resource allocation, security, and user/target-centric designs, offering a thorough literature review and case studies. Finally, the paper identifies key challenges such as synchronization, multi-target detection, interference management, and fronthaul capacity and latency. Emerging trends, including next-generation antenna technologies, network-assisted systems, near-field CF-ISAC, integration with other technologies, and machine learning approaches, are highlighted to outline the future trajectory of CF-ISAC research.
△ Less
Submitted 12 March, 2025; v1 submitted 27 February, 2025;
originally announced February 2025.
-
Low-Complexity Multi-Target Detection in ELAA ISAC
Authors:
Diluka Galappaththige,
Shayan Zargari,
Chintha Tellambura,
Geoffrey Ye Li
Abstract:
Multi-target detection and communication with extremely large-scale antenna arrays (ELAAs) operating at high frequencies necessitate generating multiple beams. However, conventional algorithms are slow and computationally intensive. For instance, they can simulate a \num{200}-antenna system over two weeks, and the time complexity grows exponentially with the number of antennas. Thus, this letter e…
▽ More
Multi-target detection and communication with extremely large-scale antenna arrays (ELAAs) operating at high frequencies necessitate generating multiple beams. However, conventional algorithms are slow and computationally intensive. For instance, they can simulate a \num{200}-antenna system over two weeks, and the time complexity grows exponentially with the number of antennas. Thus, this letter explores an ultra-low-complex solution for a multi-user, multi-target integrated sensing and communication (ISAC) system equipped with an ELAA base station (BS). It maximizes the communication sum rate while meeting sensing beampattern gain targets and transmit power constraints. As this problem is non-convex, a Riemannian stochastic gradient descent-based augmented Lagrangian manifold optimization (SGALM) algorithm is developed, which searches on a manifold to ensure constraint compliance. The algorithm achieves ultra-low complexity and superior runtime performance compared to conventional algorithms. For example, it is \num{56} times faster than the standard benchmark for \num{257} BS antennas.
△ Less
Submitted 29 January, 2025;
originally announced January 2025.
-
Hybrid Beamforming Design for RSMA-enabled Near-Field Integrated Sensing and Communications
Authors:
Jiasi Zhou,
Chintha Tellambura,
Geoffrey Ye Li
Abstract:
Integrated sensing and communication (ISAC) networks leverage extremely large antenna arrays and high frequencies. This inevitably extends the Rayleigh distance, making near-field (NF) spherical wave propagation dominant. This unlocks numerous spatial degrees of freedom, raising the challenge of optimizing them for communication and sensing tradeoffs. To this end, we propose a rate-splitting multi…
▽ More
Integrated sensing and communication (ISAC) networks leverage extremely large antenna arrays and high frequencies. This inevitably extends the Rayleigh distance, making near-field (NF) spherical wave propagation dominant. This unlocks numerous spatial degrees of freedom, raising the challenge of optimizing them for communication and sensing tradeoffs. To this end, we propose a rate-splitting multiple access (RSMA)-based NF-ISAC transmit scheme utilizing hybrid analog-digital antennas. RSMA enhances interference management, while a variable number of dedicated sensing beams adds beamforming flexibility. The objective is to maximize the minimum communication rate while ensuring multi-target sensing performance by jointly optimizing receive filters, analog and digital beamformers, common rate allocation, and the sensing beam count. To address uncertainty in sensing beam allocation, a rank-zero solution reconstruction method demonstrates that dedicated sensing beams are unnecessary for NF multi-target detection. A penalty dual decomposition (PDD)-based double-loop algorithm is introduced, employing weighted minimum mean-squared error (WMMSE) and quadratic transforms to reformulate communication and sensing rates. Simulations reveal that the proposed scheme: 1) achieves performance comparable to fully digital beamforming with fewer RF chains, (2) maintains NF multi-target detection without compromising communication rates, and 3) significantly outperforms conventional multiple access schemes and far-field ISAC systems.
△ Less
Submitted 20 April, 2025; v1 submitted 22 December, 2024;
originally announced December 2024.
-
Cell-Free Full-Duplex Communication -- An Overview
Authors:
Diluka Galappaththige,
Mohammadali Mohammadi,
Hien Quoc Ngo,
Michail Matthaiou,
Chintha Tellambura
Abstract:
Cell-free (CF) architecture and full-duplex (FD) communication are leading candidates for next-generation wireless networks. The CF framework removes cell boundaries in traditional cell-based systems, thereby mitigating inter-cell interference and improving coverage probability. In contrast, FD communication allows simultaneous transmission and reception on the same frequency-time resources, effec…
▽ More
Cell-free (CF) architecture and full-duplex (FD) communication are leading candidates for next-generation wireless networks. The CF framework removes cell boundaries in traditional cell-based systems, thereby mitigating inter-cell interference and improving coverage probability. In contrast, FD communication allows simultaneous transmission and reception on the same frequency-time resources, effectively doubling the spectral efficiency (SE). The integration of these technologies, known as CF FD communication, leverages the advantages of both approaches to enhance the spectral and energy efficiency in wireless networks. CF FD communication is particularly promising due to the low-power and cost-effective FD-enabled access points (APs), which are ideal for short-range transmissions between APs and users. Despite its potential, a comprehensive survey or tutorial on CF FD communication has been notably absent. This paper aims to address this gap in the literature. It begins with an overview of FD communication fundamentals, self-interference cancellation techniques, and CF technology principles, including their implications for current wireless networks. The discussion then moves to the integration and compatibility of CF and FD technologies, focusing on channel estimation, performance analysis, and resource allocation in CF FD massive multiple-input multiple-output (mMIMO) networks, supported by an extensive literature review and case studies.
△ Less
Submitted 5 December, 2024;
originally announced December 2024.
-
Flexible Rate-Splitting Multiple Access for Near-Field Integrated Sensing and Communications
Authors:
Jiasi Zhou,
Cong Zhou,
Cheng Zeng,
Chintha Tellambura
Abstract:
This letter presents a flexible rate-splitting multiple access (RSMA) framework for near-field (NF) integrated sensing and communications (ISAC). The spatial beams configured to meet the communication rate requirements of NF users are simultaneously leveraged to sense an additional NF target. A key innovation lies in its flexibility to select a subset of users for decoding the common stream, enhan…
▽ More
This letter presents a flexible rate-splitting multiple access (RSMA) framework for near-field (NF) integrated sensing and communications (ISAC). The spatial beams configured to meet the communication rate requirements of NF users are simultaneously leveraged to sense an additional NF target. A key innovation lies in its flexibility to select a subset of users for decoding the common stream, enhancing interference management and system performance. The system is designed by minimizing the Cramér-Rao bound (CRB) for joint distance and angle estimation through optimized power allocation, common rate allocation, and user selection. This leads to a discrete, non-convex optimization problem. Remarkably, we demonstrate that the preconfigured beams are sufficient for target sensing, eliminating the need for additional probing signals. To solve the optimization problem, an iterative algorithm is proposed combining the quadratic transform and simulated annealing. Simulation results indicate that the proposed scheme significantly outperforms conventional RSMA and space division multiple access (SDMA), reducing distance and angle estimation errors by approximately 100\% and 20\%, respectively.
△ Less
Submitted 30 November, 2024;
originally announced December 2024.
-
Joint Beam Scheduling and Resource Allocation for Flexible RSMA-aided Near-Field Communications
Authors:
Jiasi Zhou,
Cong Zhou,
Yijie Mao,
Chintha Tellambura
Abstract:
Supporting immense throughput and ubiquitous connectivity holds paramount importance for future wireless networks. To this end, this letter focuses on how the spatial beams configured for legacy near-field (NF) users can be leveraged to serve extra NF or far-field users while ensuring the rate requirements of legacy NF users. In particular, a flexible rate splitting multiple access (RSMA) scheme i…
▽ More
Supporting immense throughput and ubiquitous connectivity holds paramount importance for future wireless networks. To this end, this letter focuses on how the spatial beams configured for legacy near-field (NF) users can be leveraged to serve extra NF or far-field users while ensuring the rate requirements of legacy NF users. In particular, a flexible rate splitting multiple access (RSMA) scheme is proposed to efficiently manage interference, which carefully selects a subset of legacy users to decode the common stream. Beam scheduling, power allocation, common rate allocation, and user selection are jointly optimized to maximize the sum rate of additional users. To solve the formulated discrete non-convex problem, it is split into three subproblems. The accelerated bisection searching, quadratic transform, and simulated annealing approaches are developed to attack them. Simulation results reveal that the proposed transmit scheme and algorithm achieve significant gains over three competing benchmarks.
△ Less
Submitted 30 November, 2024;
originally announced December 2024.
-
Signal Detection in Colored Noise Using the Condition Number of $F$-Matrices
Authors:
Tharindu Udupitiya,
Prathapasinghe Dharmawansa,
Saman Atapattu,
Chintha Tellambura,
Merouane Debbah
Abstract:
Signal detection in colored noise with an unknown covariance matrix has numerous applications across various scientific and engineering disciplines. The analysis focuses on the square of the condition number \(κ^2(\cdot)\), defined as the ratio of the largest to smallest eigenvalue \((λ_{\text{max}}/λ_{\text{min}})\) of the whitened sample covariance matrix \(\bm{\widehatΨ}\), constructed from \(p…
▽ More
Signal detection in colored noise with an unknown covariance matrix has numerous applications across various scientific and engineering disciplines. The analysis focuses on the square of the condition number \(κ^2(\cdot)\), defined as the ratio of the largest to smallest eigenvalue \((λ_{\text{max}}/λ_{\text{min}})\) of the whitened sample covariance matrix \(\bm{\widehatΨ}\), constructed from \(p\) signal-plus-noise samples and \(n\) noise-only samples, both \(m\)-dimensional. This statistic is denoted as \(κ^2(\bm{\widehatΨ})\). A finite-dimensional characterization of the false alarm probability for this statistic under the null and alternative hypotheses has been an open problem. Therefore, in this work, we address this by deriving the cumulative distribution function (c.d.f.) of \(κ^2(\bm{\widehatΨ})\) using the powerful orthogonal polynomial approach in random matrix theory. These c.d.f. expressions have been used to statistically characterize the performance of \(κ^2(\bm{\widehatΨ})\).
△ Less
Submitted 26 November, 2024;
originally announced November 2024.
-
Structured Tensor Decomposition Based Channel Estimation and Double Refinements for Active RIS Empowered Broadband Systems
Authors:
Yirun Wang,
Yongqing Wang,
Yuyao Shen,
Gongpu Wang,
Chintha Tellambura
Abstract:
Channel parameter recovery is critical for the next-generation reconfigurable intelligent surface (RIS)-empowered communications and sensing. Tensor-based mechanisms are particularly effective, inherently capturing the multi-dimensional nature of wireless channels. However, existing studies assume either a line-of-sight (LOS) scenario or a blocked TX-RX channel. This paper solves a novel problem:…
▽ More
Channel parameter recovery is critical for the next-generation reconfigurable intelligent surface (RIS)-empowered communications and sensing. Tensor-based mechanisms are particularly effective, inherently capturing the multi-dimensional nature of wireless channels. However, existing studies assume either a line-of-sight (LOS) scenario or a blocked TX-RX channel. This paper solves a novel problem: tensor-based channel parameter estimation for active RIS-aided multiple-antenna broadband connections in fully multipath environments with the TX-RX link. System settings are customized to construct a fifth-order canonical polyadic (CP) signal tensor that matches the five-dimensional channel. Four tensor factors contain redundant columns, rendering the classical Kruskal's condition for decomposition uniqueness unsatisfied. The fifth-order Vandermonde structured CP decomposition (VSCPD) is developed to address this challenge, making the tensor factorization problem solvable using only linear algebra and offering a relaxed general uniqueness condition. With VSCPD as a perfect decoupling scheme, a sequential triple-stage channel estimation algorithm is proposed based on one-dimensional parameter estimation. The first stage enables multipath identification and algebraic coarse estimation. The following two stages offer optional successive refinements at the cost of increased complexity. The closed-form Cramer-Rao lower bound (CRLB) is derived to assess the estimation performance. Herein, the noise covariance matrix depends on multipath parameters in our active-RIS scenario. Numerical results are provided to verify the effectiveness of proposed algorithms under various evaluation metrics. Our results also show that active RIS can significantly improve channel estimation performance compared to passive RIS.
△ Less
Submitted 19 January, 2025; v1 submitted 25 November, 2024;
originally announced November 2024.
-
Downlink Beamforming for Cell-Free ISAC: A Fast Complex Oblique Manifold Approach
Authors:
Shayan Zargari,
Diluka Galappaththige,
Chintha Tellambura,
Geoffrey Ye Li
Abstract:
Cell-free integrated sensing and communication (CF-ISAC) systems are just emerging as an interesting technique for future communications. Such a system comprises several multiple-antenna access points (APs), serving multiple single-antenna communication users and sensing targets. However, efficient beamforming designs that achieve high precision and robust performance in densely populated networks…
▽ More
Cell-free integrated sensing and communication (CF-ISAC) systems are just emerging as an interesting technique for future communications. Such a system comprises several multiple-antenna access points (APs), serving multiple single-antenna communication users and sensing targets. However, efficient beamforming designs that achieve high precision and robust performance in densely populated networks are lacking. This paper proposes a new beamforming algorithm by exploiting the inherent Riemannian manifold structure. The aim is to maximize the communication sum rate while satisfying sensing beampattern gains and per AP transmit power constraints. To address this constrained optimization problem, a highly efficient augmented Lagrangian model-based iterative manifold optimization for CF-ISAC (ALMCI) algorithm is developed. This algorithm exploits the geometry of the proposed problem and uses a complex oblique manifold. Conventional convex-concave procedure (CCPA) and multidimensional complex quadratic transform (MCQT)-CSA algorithms are also developed as comparative benchmarks. The ALMCI algorithm significantly outperforms both of these. For example, with 16 APs having 12 antennas and 30 dBm transmit power each, our proposed ALMCI algorithm yields 22.7% and 6.7% sum rate gains over the CCPA and MCQT-CSA algorithms, respectively. In addition to improvement in communication capacity, the ALMCI algorithm achieves superior beamforming gains and reduced complexity.
△ Less
Submitted 10 September, 2024;
originally announced September 2024.
-
Optimization of Rate-Splitting Multiple Access with Integrated Sensing and Backscatter Communication
Authors:
Diluka Galappaththige,
Shayan Zargari,
Chintha Tellambura,
Geoffrey Ye Li
Abstract:
An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA sc…
▽ More
An integrated sensing and backscatter communication (ISABC) system is introduced herein. This system features a full-duplex (FD) base station (BS) that seamlessly merges sensing with backscatter communication and supports multiple users. Multiple access (MA) for the user is provided by employing rate-splitting multiple access (RSMA). RSMA, unlike other classical orthogonal and non-orthogonal MA schemes, splits messages into common and private streams. With RSMA, the set of common rate forms can be optimized to reduce interference. Optimized formulas are thus derived for communication rates for users, tags, and the BS's sensing rate, with the primary goal of enhancing the transmission efficiency of the BS. The optimization task involves minimizing the BS's overall transmission power by jointly optimizing the BS's beamforming vectors, the tag reflection coefficients, and user common rates. The alternating optimization method is employed to address this challenge. Concrete solutions are provided for the received beamformers, and semi-definite relaxation and slack-optimization techniques are adopted for transmit beamformers and reflection coefficients, respectively. For example, the proposed RSMA-assisted ISABC system achieves a 350% communication rate boost over a nonorthogonal multiple access-assisted ISABC, with only a 24% increase in transmit power, leveraging ten transmit/reception antennas at the BS.
△ Less
Submitted 29 January, 2025; v1 submitted 4 June, 2024;
originally announced June 2024.
-
Refined-Deep Reinforcement Learning for MIMO Bistatic Backscatter Resource Allocation
Authors:
S. Zargari,
D. Galappaththige,
C. Tellambura
Abstract:
Bistatic backscatter communication facilitates ubiquitous, massive connectivity of passive tags for future Internet-of-Things (IoT) networks. The tags communicate with readers by reflecting carrier emitter (CE) signals. This work addresses the joint design of the transmit/receive beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is formulated…
▽ More
Bistatic backscatter communication facilitates ubiquitous, massive connectivity of passive tags for future Internet-of-Things (IoT) networks. The tags communicate with readers by reflecting carrier emitter (CE) signals. This work addresses the joint design of the transmit/receive beamformers at the CE/reader and the reflection coefficient of the tag. A throughput maximization problem is formulated to satisfy the tag requirements. A joint design is developed through a series of trial-and-error interactions within the environment, driven by a predefined reward system in a continuous state and action context. By leveraging recent advances in deep reinforcement learning (DRL), the underlying optimization problem is addressed. Capitalizing on deep deterministic policy gradient (DDPG) and soft actor-critic (SAC), we proposed two new algorithms, namely refined-DDPG for MIMO BiBC (RDMB) and refined-SAC for MIMO BiBC (RSMB). Simulation results show that the proposed algorithms can effectively learn from the environment and progressively improve their performance. They achieve results comparable to two leading benchmarks: alternating optimization (AO) and several DRL methods, including deep Q-network (DQN), double deep Q-network (DDQN), and dueling DQN (DuelDQN). For a system with twelve antennas, RSMB leads with a %26.76 gain over DQN, followed by AO and RSMB at 23.02% and 19.16%, respectively.
△ Less
Submitted 26 July, 2024; v1 submitted 22 May, 2024;
originally announced May 2024.
-
Transmit Power Optimization for Integrated Sensing and Backscatter Communication
Authors:
S. Zargari,
D. Galappaththige,
C. Tellambura
Abstract:
Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of d…
▽ More
Ambient Internet of Things networks use low-cost, low-power backscatter tags in various industry applications. By exploiting those tags, we introduce the integrated sensing and backscatter communication (ISABC) system, featuring multiple backscatter tags, a user (reader), and a full-duplex base station (BS) that integrates sensing and (backscatter) communications. The BS undertakes dual roles of detecting backscatter tags and communicating with the user, leveraging the same temporal and frequency resources. The tag-reflected BS signals offer data to the user and enable the BS to sense the environment simultaneously. We derive both user and tag communication rates and the sensing rate of the BS. We jointly optimize the transmit/received beamformers and tag reflection coefficients to minimize the total BS power. To solve this problem, we employ the alternating optimization technique. We offer a closed-form solution for the received beamformers while utilizing semi-definite relaxation and slack-optimization for transmit beamformers and power reflection coefficients, respectively. For example, with ten transmit/reception antennas at the BS, ISABC delivers a 75% sum communication and sensing rates gain over a traditional backscatter while requiring a 3.4% increase in transmit power. Furthermore, ISABC with active tags only requires a 0.24% increase in transmit power over conventional integrated sensing and communication.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
A Riemannian Manifold Approach to Constrained Resource Allocation in ISAC
Authors:
Shayan Zargari,
Diluka Galappaththige,
Chintha Tellambura,
Vincent Poor
Abstract:
This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) trans…
▽ More
This paper introduces a new resource allocation framework for integrated sensing and communication (ISAC) systems, which are expected to be fundamental aspects of sixth-generation networks. In particular, we develop an augmented Lagrangian manifold optimization (ALMO) framework designed to maximize communication sum rate while satisfying sensing beampattern gain targets and base station (BS) transmit power limits. ALMO applies the principles of Riemannian manifold optimization (MO) to navigate the complex, non-convex landscape of the resource allocation problem. It efficiently leverages the augmented Lagrangian method to ensure adherence to constraints. We present comprehensive numerical results to validate our framework, which illustrates the ALMO method's superior capability to enhance the dual functionalities of communication and sensing in ISAC systems. For instance, with 12 antennas and 30 dBm BS transmit power, our proposed ALMO algorithm delivers a 10.1% sum rate gain over a benchmark optimization-based algorithm. This work demonstrates significant improvements in system performance and contributes a new algorithmic perspective to ISAC resource management.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Sensing and Backscatter Communication Integration: Realizing Efficiency in Wireless Systems for IoT
Authors:
Shayan Zargari,
Diluka Galappaththige,
Chintha Tellambura
Abstract:
In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical devel…
▽ More
In an era driven by the Internet of Things (IoT) and rapid wireless communication advances, the synergy between sensing and backscatter communication (BackCom) has emerged as a frontier of research. This paper delves deep into the integration of sensing technologies with BackCom, a burgeoning field with significant implications for energy-efficient wireless systems. By tracing the historical developments and principles of BackCom, we establish the foundational understanding crucial for integrating advanced sensing methodologies. Our study adopts a mixed-method approach, combining quantitative analyses of system performances with qualitative assessments of various integration techniques. Furthermore, these integrated systems showcase enhanced adaptability in dynamic environments, a pivotal attribute for future IoT applications. These findings hold profound implications for industries focusing on smart technologies, as they underscore the potential for achieving both sustainable and efficient communication. Our research distinguishes itself by not only highlighting the benefits but also addressing the challenges faced in this integration, providing a comprehensive overview of the topic.
△ Less
Submitted 11 December, 2023;
originally announced December 2023.
-
Signal Detection in Ambient Backscatter Systems: Fundamentals, Methods, and Trends
Authors:
Shayan Zargari,
Azar Hakimi,
Fatemeh Rezaei,
Chintha Tellambura,
Amine Maaref
Abstract:
Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the ra…
▽ More
Internet-of-Things (IoT) is rapidly growing in wireless technology, aiming to connect vast numbers of devices to gather and distribute vital information. Despite individual devices having low energy consumption, the cumulative demand results in significant energy usage. Consequently, the concept of ultra-low-power tags gains appeal. Such tags communicate by reflecting rather than generating the radio frequency (RF) signals by themselves. Thus, these backscatter tags can be low-cost and battery-free. The RF signals can be ambient sources such as wireless-fidelity (Wi-Fi), cellular, or television (TV) signals, or the system can generate them externally. Backscatter channel characteristics are different from conventional point-to-point or cooperative relay channels. These systems are also affected by a strong interference link between the RF source and the tag besides the direct and backscattering links, making signal detection challenging. This paper provides an overview of the fundamentals, challenges, and ongoing research in signal detection for AmBC networks. It delves into various detection methods, discussing their advantages and drawbacks. The paper's emphasis on signal detection sets it apart and positions it as a valuable resource for IoT and wireless communication professionals and researchers.
△ Less
Submitted 6 December, 2023;
originally announced December 2023.
-
Enhancing AmBC Systems with Deep Learning for Joint Channel Estimation and Signal Detection
Authors:
S. Zargari,
A. Hakimi,
C. Tellambura,
A. Maaref
Abstract:
The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channe…
▽ More
The era of ubiquitous, affordable wireless connectivity has opened doors to countless practical applications. In this context, ambient backscatter communication (AmBC) stands out, utilizing passive tags to establish connections with readers by harnessing reflected ambient radio frequency (RF) signals. However, conventional data detectors face limitations due to their inadequate knowledge of channel and RF-source parameters. To address this challenge, we propose an innovative approach using a deep neural network (DNN) for channel state estimation (CSI) and signal detection within AmBC systems. Unlike traditional methods that separate CSI estimation and data detection, our approach leverages a DNN to implicitly estimate CSI and simultaneously detect data. The DNN model, trained offline using simulated data derived from channel statistics, excels in online data recovery, ensuring robust performance in practical scenarios. Comprehensive evaluations validate the superiority of our proposed DNN method over traditional detectors, particularly in terms of bit error rate (BER). In high signal-to-noise ratio (SNR) conditions, our method exhibits an impressive approximately 20% improvement in BER performance compared to the maximum likelihood (ML) approach. These results underscore the effectiveness of our developed approach for AmBC channel estimation and signal detection. In summary, our method outperforms traditional detectors, bolstering the reliability and efficiency of AmBC systems, even in challenging channel conditions.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Cell-Free Bistatic Backscatter Communication: Channel Estimation, Optimization, and Performance Analysis
Authors:
Diluka Galappaththige,
Fatemeh Rezaei,
Chintha Tellambura,
Amine Maaref
Abstract:
This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential applications in future (EH)-based Internet-of-Things (IoT) networks. To that purpose, we first present a pilot-based channel estimation scheme for estimating the di…
▽ More
This study introduces and investigates the integration of a cell-free architecture with bistatic backscatter communication (BiBC), referred to as cell-free BiBC or distributed access point (AP)-assisted BiBC, which can enable potential applications in future (EH)-based Internet-of-Things (IoT) networks. To that purpose, we first present a pilot-based channel estimation scheme for estimating the direct, cascaded, forward channels of the proposed system setup. We next utilize the channel estimates for designing the optimal beamforming weights at the APs, reflection coefficients at the tags, and reception filters at the reader to maximize the tag sum rate while meeting the tags' minimum energy requirements. Because the proposed maximization problem is non-convex, we propose a solution based on alternative optimization, fractional programming, and Rayleigh quotient techniques. We also quantify the computational complexity of the developed algorithms. Finally, we present extensive numerical results to validate the proposed channel estimation scheme and optimization framework, as well as the performance of the integration of these two technologies. Compared to the random beamforming/combining benchmark, our algorithm yields impressive gains. For example, it achieves $\sim$ 64.8\% and $\sim$ 253.5\% gains in harvested power and tag sum rate, respectively, for 10 dBm with 36 APs and 3 tags.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
RIS-Assisted Energy Harvesting Gains for Bistatic Backscatter Networks: Performance Analysis and RIS Phase Optimization
Authors:
Diluka Galappaththige,
Fatemeh Rezaei,
Chintha Tellambura,
Sanjeewa Herath
Abstract:
Inexpensive tags powered by energy harvesting (EH) can realize green (energy-efficient) Internet of Things (IoT) networks. However, tags are vulnerable to energy insecurities, resulting in poor communication ranges, activation distances, and data rates. To overcome these challenges, we explore the use of a reconfigurable intelligent surface (RIS) for EH-based IoT networks. The RIS is deployed to e…
▽ More
Inexpensive tags powered by energy harvesting (EH) can realize green (energy-efficient) Internet of Things (IoT) networks. However, tags are vulnerable to energy insecurities, resulting in poor communication ranges, activation distances, and data rates. To overcome these challenges, we explore the use of a reconfigurable intelligent surface (RIS) for EH-based IoT networks. The RIS is deployed to enhance RF power at the tag, improving EH capabilities. We consider linear and non-linear EH models and analyze single-tag and multi-tag scenarios. For single-tag networks, the tag's maximum received power and the reader's signal-to-noise ratio with the optimized RIS phase-shifts are derived. Key metrics, such as received power, harvested power, achievable rate, outage probability, bit error rate, and diversity order, are also evaluated. The impact of RIS phase shift quantization errors is also studied. For the multi-tag case, an algorithm to compute the optimal RIS phase-shifts is developed. Numerical results and simulations demonstrate significant improvements compared to the benchmarks of no-RIS case and random RIS-phase design. For instance, our optimal design with a \num{200}-element RIS increases the activation distance by \qty{270}{\percent} and \qty{55}{\percent} compared to those benchmarks. In summary, RIS deployment improves the energy autonomy of tags while maintaining the basic tag design intact.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Adversarial Score-Based Generative Models for MMSE-achieving AmBC Channel Estimation
Authors:
Fatemeh Rezaei,
S. Mojtaba Marvasti-Zadeh,
Chintha Tellambura,
Amine Maaref
Abstract:
This letter presents a pioneering method that employs deep learning within a probabilistic framework for the joint estimation of both direct and cascaded channels in an ambient backscatter (AmBC) network comprising multiple tags. In essence, we leverage an adversarial score-based generative model for training, enabling the acquisition of channel distributions. Subsequently, our channel estimation…
▽ More
This letter presents a pioneering method that employs deep learning within a probabilistic framework for the joint estimation of both direct and cascaded channels in an ambient backscatter (AmBC) network comprising multiple tags. In essence, we leverage an adversarial score-based generative model for training, enabling the acquisition of channel distributions. Subsequently, our channel estimation process involves sampling from the posterior distribution, facilitated by the annealed Langevin sampling technique. Notably, our method demonstrates substantial advancements over standard least square (LS) estimation techniques, achieving performance akin to that of the minimum mean square error (MMSE) estimator for the direct channel, and outperforming it for the cascaded channels.
△ Less
Submitted 25 December, 2023; v1 submitted 11 September, 2023;
originally announced September 2023.
-
Improved Energy-Based Signal Detection for Ambient Backscatter Communications
Authors:
S. Zargari,
C. Tellambura,
A. Maaref
Abstract:
In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint…
▽ More
In ambient backscatter communication (AmBC) systems, passive tags connect to a reader by reflecting an ambient radio frequency (RF) signal. However, the reader may not know the channel states and RF source parameters. The traditional energy detector (TED) appears to be an ideal solution. However, it performs poorly under these conditions. To address this, we propose two new detectors: (1) A joint correlation-energy detector (JCED) based on the first-order correlation of the received samples and (2) An improved energy detector (IED) based on the p-th norm of the received signal vector. We compare the performance of IED and TED under the generalized noise model using McLeish distribution and derive a general analytical formula for the area under the receiver operating characteristic (ROC) curves. Based on our results, both detectors outperform TED. For example, the probability of detection with a false alarm rate of 1\% for JCED and IED is 22.97\% and 5.41\% higher, respectively, compared to TED for a single-antenna reader. Using the direct interference cancellation (DIC) technique, these gains are 34.92\% and 3.7\%, respectively. With a four-antenna array at the reader and a 5\% false alarm rate, the JCED shows a significant BER improvement of 28.68\% without DIC and 48.21\% with DIC.
△ Less
Submitted 12 June, 2024; v1 submitted 22 June, 2023;
originally announced June 2023.
-
Time-Spread Pilot-Based Channel Estimation for Backscatter Networks
Authors:
Fatemeh Rezaei,
Diluka Galappaththige,
Chintha Tellambura,
Amine Maaref
Abstract:
Current backscatter channel estimators employ an inefficient silent pilot transmission protocol, where tags alternate between silent and active states. To enhance performance, we propose a novel approach where tags remain active simultaneously throughout the entire training phase. This enables a one-shot estimation of both the direct and cascaded channels and accommodates various backscatter netwo…
▽ More
Current backscatter channel estimators employ an inefficient silent pilot transmission protocol, where tags alternate between silent and active states. To enhance performance, we propose a novel approach where tags remain active simultaneously throughout the entire training phase. This enables a one-shot estimation of both the direct and cascaded channels and accommodates various backscatter network configurations. We derive the conditions for optimal pilot sequences and also establish that the minimum variance unbiased (MVU) estimator attains the Cramer-Rao lower bound. Next, we propose new pilot designs to avoid pilot contamination. We then present several linear estimation methods, including least square (LS), scaled LS, and linear minimum mean square error (MMSE), to evaluate the performance of our proposed scheme. We also derive the analytical MMSE estimator using our proposed pilot designs. Furthermore, we adapt our method for cellular-based passive Internet-of-Things (IoT) networks with multiple tags and cellular users. Extensive numerical results and simulations are provided to validate the effectiveness of our approach. Notably, at least 10 dBm and 12 dBm power savings compared to the prior art are achieved when estimating the direct and cascaded channels. These findings underscore the practical benefits and superiority of our proposed technique.
△ Less
Submitted 2 October, 2023; v1 submitted 26 May, 2023;
originally announced May 2023.
-
NOMA-Assisted Symbiotic Backscatter: Novel Beamforming Designs Under Imperfect SIC
Authors:
Fatemeh Rezaei,
Diluka Galappaththige,
Chintha Tellambura,
Sanjeewa Herath
Abstract:
Optimal beamforming designs under imperfect successive interference cancellation (SIC) decoding for a symbiotic network of non-orthogonal multiple access (NOMA) primary users and a secondary ambient tag have been lacking. We address that issue here. The primary base station (BS) serves NOMA users and a passive tag simultaneously in this network. We develop two transmit beamforming designs to meet…
▽ More
Optimal beamforming designs under imperfect successive interference cancellation (SIC) decoding for a symbiotic network of non-orthogonal multiple access (NOMA) primary users and a secondary ambient tag have been lacking. We address that issue here. The primary base station (BS) serves NOMA users and a passive tag simultaneously in this network. We develop two transmit beamforming designs to meet the user and tag requirements while mitigating the effect of imperfect SIC. Specifically, we design optimal BS transmit beamforming and power allocation to either maximize the weighted sum rate of NOMA users and the tag or minimize the BS transmit power under the minimum rate requirements while satisfying the tag minimum energy requirement. Because both these problems are non-convex, we propose algorithms using alternative optimization, fractional programming, and semi-definite relaxation techniques. We also analyze their computational complexity. Finally, we present extensive numerical results to validate the proposed schemes and to show significant performance gains while keeping the tag design intact. For example, the proposed digital beamforming increases the harvested power and data rate by 2.16e3 % and 314.5 % compared to random beamforming.
△ Less
Submitted 27 November, 2023; v1 submitted 17 February, 2023;
originally announced February 2023.
-
User Scheduling and Trajectory Optimization for Energy-Efficient IRS-UAV Networks with SWIPT
Authors:
S. Zargari,
A. Hakimi,
C. Tellambura,
S. Herath
Abstract:
This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests…
▽ More
This paper investigates user scheduling and trajectory optimization for a network supported by an intelligent reflecting surface (IRS) mounted on an unmanned aerial vehicle (UAV). The IRS is powered via the simultaneous wireless information and power transfer (SWIPT) technique. The IRS boosts users' uplink signals to improve the network's longevity and energy efficiency. It simultaneously harvests energy with a non-linear energy harvesting circuit and reflects the incident signals by controlling its reflection coefficients and phase shifts. The trajectory of the UAV impacts the efficiency of these operations. We minimize the maximum energy consumption of all users by joint optimization of user scheduling, UAV trajectory/velocity, and IRS phase shifts/reflection coefficients while guaranteeing each user's minimum required data rate and harvested energy of the IRS. We first derive a closed-form solution for the IRS phase shifts and then address the non-convexity of the critical problem. Finally, we propose an alternating optimization (AO) algorithm to optimize the remaining variables iteratively. We demonstrate the gains over several benchmarks. For instance, with a 50-element IRS, min-max energy consumption can be as low as 0.0404 (Joule), a 7.13% improvement over the No IRS case (achieving 0.0435 (Joule)). We also show that IRS-UAV without EH performs best at the cost of circuit power consumption of the IRS (a 20% improvement over the No IRS case).
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
IRS-Enabled Backscattering in a Downlink Non-Orthogonal Multiple Access System
Authors:
Azar Hakimi,
Shayan Zargari,
Chintha Tellambura,
Sanjeewa Herath
Abstract:
Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest…
▽ More
Intelligent reflecting surface (IRS)-enabled backscatter communications can be enabled by an access point (AP) that splits its transmit signal into modulated and unmodulated parts. This letter integrates non-orthogonal multiple access (NOMA) with this method to create a two-user primary system and a secondary system of IRS data. Considering the decoding order, we maximize the rate of the strongest primary user by jointly optimizing the IRS phase shifts, power splitting (PS) factor at the AP, and NOMA power coefficients while guaranteeing the quality of service (QoS) for both weak user and IRS data in the primary and secondary systems, respectively. The resulting optimization problem is non-convex. Thus, we split it into three parts and develop an alternating optimization (AO) algorithm. The advantage is that we derive closed-form solutions for the PS factor and NOMA power coefficients in the first two parts. In the third part, we optimize the phase shifts by exploiting semi-definite relaxation (SDR) and penalty techniques to handle the unit-modulus constraints. This algorithm achieves substantial gains (e.g., 40--68%) compared to relevant baseline schemes.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Doppler Shift and Channel Estimation for Intelligent Transparent Surface Assisted Communication Systems on High-Speed Railways
Authors:
Yirun Wang,
Gongpu Wang,
Ruisi He,
Bo Ai,
Chintha Tellambura
Abstract:
The critical distinction between the emerging intelligent transparent surface (ITS) and intelligent reflection surface (IRS) is that the incident signals can penetrate the ITS instead of being reflected, which enables the ITS to combat the severe signal penetration loss for high-speed railway (HSR) wireless communications. This paper thus investigates the channel estimation problem for an ITS-assi…
▽ More
The critical distinction between the emerging intelligent transparent surface (ITS) and intelligent reflection surface (IRS) is that the incident signals can penetrate the ITS instead of being reflected, which enables the ITS to combat the severe signal penetration loss for high-speed railway (HSR) wireless communications. This paper thus investigates the channel estimation problem for an ITS-assisted HSR network where the ITS is embedded into the carriage window. We first formulate the channels as functions of physical parameters, and thus transform the channel estimation into a parameter recovery problem. Next, we design the first two pilot blocks within each frame and develop a serial low-complexity channel estimation algorithm. Specifically, the channel estimates are initially obtained, and each estimate is further expressed as the sum of its perfectly known value and the estimation error. By leveraging the relationship between channels for the two pilot blocks, we recover the Doppler shifts from the channel estimates, based on which we can further acquire other channel parameters. Moreover, the Cramer-Rao lower bound (CRLB) for each parameter is derived as a performance benchmark. Finally, we provide numerical results to establish the effectiveness of our proposed estimators.
△ Less
Submitted 31 July, 2022;
originally announced August 2022.
-
Multiuser MISO PS-SWIPT Systems: Active or Passive RIS?
Authors:
Shayan Zargari,
Azar Hakimi,
Chintha Tellambura,
Sanjeewa Herath
Abstract:
Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wire…
▽ More
Reconfigurable intelligent surface (RIS)-based communication networks promise to improve channel capacity and energy efficiency. However, the promised capacity gains could be negligible for passive RISs because of the double pathloss effect. Active RISs can overcome this issue because they have reflector elements with a low-cost amplifier. This letter studies the active RIS-aided simultaneous wireless information and power transfer (SWIPT) in a multiuser system. The users exploit power splitting (PS) to decode information and harvest energy simultaneously based on a realistic piecewise nonlinear energy harvesting model. The goal is to minimize the base station (BS) transmit power by optimizing its beamformers, PS ratios, and RIS phase shifts/amplification factors. The simulation results show significant improvements (e.g., 19% and 28%) with the maximum reflect power of 10 mW and 15 mW, respectively, compared to the passive RIS without higher computational complexity cost. We also show the robustness of the proposed algorithm against imperfect channel state information.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
Energy-Efficient Hybrid Offloading for Backscatter-Assisted Wirelessly Powered MEC with Reconfigurable Intelligent Surfaces
Authors:
S. Zargari,
C. Tellambura,
S. Herath
Abstract:
We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optim…
▽ More
We investigate a wireless power transfer (WPT)-based backscatter-mobile edge computing (MEC) network with a {reconfigurable intelligent surface (RIS)}.In this network, wireless devices (WDs) offload task bits and harvest energy, and they can switch between backscatter communication (BC) and active transmission (AT) modes. We exploit the RIS to maximize energy efficiency (EE). To this end, we optimize the time/power allocations, local computing frequencies, execution times, backscattering coefficients, and RIS phase shifts.} This goal results in a multi-objective optimization problem (MOOP) with conflicting objectives. Thus, we simultaneously maximize system throughput and minimize energy consumption via the Tchebycheff method, transforming into two single-objective optimization problems (SOOPs). For throughput maximization, we exploit alternating optimization (AO) to yield two sub-problems. For the first one, we derive closed-form resource allocations. For the second one, we design the RIS phase shifts via semi-definite relaxation, a difference of convex functions programming, majorization minimization techniques, and a penalty function for enforcing a rank-one solution. For energy minimization, we derive closed-form resource allocations. We demonstrate the gains over several benchmarks. For instance, with a $20$-element RIS, EE can be as high as 3 (Mbits/Joule), a 150\% improvement over the no-RIS case (achieving only 2 (Mbits/Joule)).
△ Less
Submitted 1 June, 2022;
originally announced June 2022.
-
Task Offloading with Multi-Tier Computing Resources in Next Generation Wireless Networks
Authors:
Kunlun Wang,
Jiong Jin,
Yang Yang,
Tao Zhang,
Arumugam Nallanathan,
Chintha Tellambura,
Bijan Jabbari
Abstract:
With the development of next-generation wireless networks, the Internet of Things (IoT) is evolving towards the intelligent IoT (iIoT), where intelligent applications usually have stringent delay and jitter requirements. In order to provide low-latency services to heterogeneous users in the emerging iIoT, multi-tier computing was proposed by effectively combining edge computing and fog computing.…
▽ More
With the development of next-generation wireless networks, the Internet of Things (IoT) is evolving towards the intelligent IoT (iIoT), where intelligent applications usually have stringent delay and jitter requirements. In order to provide low-latency services to heterogeneous users in the emerging iIoT, multi-tier computing was proposed by effectively combining edge computing and fog computing. More specifically, multi-tier computing systems compensate for cloud computing through task offloading and dispersing computing tasks to multi-tier nodes along the continuum from the cloud to things. In this paper, we investigate key techniques and directions for wireless communications and resource allocation approaches to enable task offloading in multi-tier computing systems. A multi-tier computing model, with its main functionality and optimization methods, is presented in details. We hope that this paper will serve as a valuable reference and guide to the theoretical, algorithmic, and systematic opportunities of multi-tier computing towards next-generation wireless networks.
△ Less
Submitted 27 May, 2022;
originally announced May 2022.
-
PAPR Reduction Method Based on Parametric Minimum Cross Entropy for OFDM Signals
Authors:
Yajun Wang,
Wen Chen,
Chintha Tellambura
Abstract:
The partial transmit sequence (PTS) technique has received much attention in reducing the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals. However, the PTS technique requires an exhaustive search of all combinations of the allowed phase factors, and the search complexity increases exponentially with the number of sub-blocks. In this paper, a nov…
▽ More
The partial transmit sequence (PTS) technique has received much attention in reducing the high peak to average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals. However, the PTS technique requires an exhaustive search of all combinations of the allowed phase factors, and the search complexity increases exponentially with the number of sub-blocks. In this paper, a novel method based on parametric minimum cross entropy (PMCE) is proposed to search the optimal combination of phase factors. The PMCE algorithm not only reduces the PAPR significantly, but also decreases the computational complexity. The simulation results show that it achieves more or less the same PAPR reduction as that of exhaustive search.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Genetic Algorithm Based Nearly Optimal Peak Reduction Tone Set Selection for Adaptive Amplitude Clipping PAPR Reduction
Authors:
Yajun Wang,
Wen Chen,
Chintha Tellambura
Abstract:
In tone reservation (TR) based OFDM systems, the peak to average power ratio (PAPR) reduction performance mainly depends on the selection of the peak reduction tone (PRT) set and the optimal target clipping level. Finding the optimal PRT set requires an exhaustive search of all combinations of possible PRT sets, which is a nondeterministic polynomial-time (NP-hard) problem, and this search is infe…
▽ More
In tone reservation (TR) based OFDM systems, the peak to average power ratio (PAPR) reduction performance mainly depends on the selection of the peak reduction tone (PRT) set and the optimal target clipping level. Finding the optimal PRT set requires an exhaustive search of all combinations of possible PRT sets, which is a nondeterministic polynomial-time (NP-hard) problem, and this search is infeasible for the number of tones used in practical systems. The existing selection methods, such as the consecutive PRT set, equally spaced PRT set and random PRT set, perform poorly compared to the optimal PRT set or incur high computational complexity. In this paper, an efficient scheme based on genetic algorithm (GA) with lower computational complexity is proposed for searching a nearly optimal PRT set. While TR-based clipping is simple and attractive for practical implementation, determining the optimal target clipping level is difficult. To overcome this problem, we propose an adaptive clipping control algorithm.Simulation results show that our proposed algorithms efficiently obtain a nearly optimal PRT set and good PAPR reductions.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
A PAPR Reduction Method Based on Artificial Bee Colony Algorithm for OFDM Signals
Authors:
Yajun Wang,
Wen Chen,
Chintha Tellambura
Abstract:
One of the major drawbacks of orthogonal frequency division multiplexing (OFDM) signals is the high peak to average power ratio (PAPR) of the transmitted signal. Many PAPR reduction techniques have been proposed in the literature, among which, partial transmit sequence (PTS) technique has been taken considerable investigation.However, PTS technique requires an exhaustive search over all combinatio…
▽ More
One of the major drawbacks of orthogonal frequency division multiplexing (OFDM) signals is the high peak to average power ratio (PAPR) of the transmitted signal. Many PAPR reduction techniques have been proposed in the literature, among which, partial transmit sequence (PTS) technique has been taken considerable investigation.However, PTS technique requires an exhaustive search over all combinations of allowed phase factors, whose complexity increases exponentially with the number of sub-blocks. In this paper, a newly suboptimal method based on modified artificial bee colony (ABC-PTS) algorithm is proposed to search the better combination of phase factors. The ABC-PTS algorithm can significantly reduce the computational complexity for larger PTS subblocks and offers lower PAPR at the same time. Simulation results show that the ABC-PTS algorithm is an efficient method to achieve significant PAPR reduction.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Channel Estimation for Wireless Communication Systems Assisted by Large Intelligent Surfaces
Authors:
Junliang Lin,
Gongpu Wang,
Rongfei Fan,
Theodoros A. Tsiftsis,
Chintha Tellambura
Abstract:
In this letter, the channel estimation problem is studied for wireless communication systems assisted by large intelligent surface. Due to features of assistant channel, channel estimation (CE) problem for the investigated system is shown as a constrained estimation error minimization problem, which differs from traditional CE problems. A Lagrange multiplier and dual ascent-based estimation scheme…
▽ More
In this letter, the channel estimation problem is studied for wireless communication systems assisted by large intelligent surface. Due to features of assistant channel, channel estimation (CE) problem for the investigated system is shown as a constrained estimation error minimization problem, which differs from traditional CE problems. A Lagrange multiplier and dual ascent-based estimation scheme is then designed to obtain a closed-form solution for the estimator iteratively. Moreover, the Cramer-Rao lower bounds are deduced for performance evaluation. Simulation results show that the designed scheme could improve estimation accuracy up to 18%, compared with least square method in low signal-to-noise ratio regime.
△ Less
Submitted 5 November, 2019;
originally announced November 2019.
-
Full-Duplex GFDM Radio Transceivers in the Presence of Phase Noise, CFO and IQ Imbalance
Authors:
Amirhossein Mohammadian,
Chintha Tellambura
Abstract:
This paper addresses the performance of a full-duplex (FD) generalized frequency division multiplexing (GFDM) transceiver in the presence of radio frequency (RF) impairments including phase noise, carrier frequency offset (CFO) and in-phase (I) and quadrature (Q) imbalance. We study analog and digital self-interference (SI) cancellation and develop a complementary SI suppression method. Closed-for…
▽ More
This paper addresses the performance of a full-duplex (FD) generalized frequency division multiplexing (GFDM) transceiver in the presence of radio frequency (RF) impairments including phase noise, carrier frequency offset (CFO) and in-phase (I) and quadrature (Q) imbalance. We study analog and digital self-interference (SI) cancellation and develop a complementary SI suppression method. Closed-form solutions for the residual SI power and the desired signal power and signal-to-interference ratio (SIR) are provided. Simulation results show that the RF impairments degrade SI cancellation and FD GFDM is more sensitive to them compares to FD orthogonal frequency division multiplexing (OFDM). Hence, we propose an FD GFDM receiver filter for maximizing the SIR. Significantly, it achieves 25 dB higher SIR than FD OFDM transceiver.
△ Less
Submitted 29 March, 2019;
originally announced April 2019.
-
Detection of a Signal in Colored Noise: A Random Matrix Theory Based Analysis
Authors:
Lahiru D. Chamain,
Prathapasinghe Dharmawansa,
Saman Atapattu,
Chintha Tellambura
Abstract:
This paper investigates the classical statistical signal processing problem of detecting a signal in the presence of colored noise with an unknown covariance matrix. In particular, we consider a scenario where m-dimensional p possible signal-plus-noise samples and m-dimensional n noise-only samples are available at the detector. Then the presence of a signal can be detected using the largest gener…
▽ More
This paper investigates the classical statistical signal processing problem of detecting a signal in the presence of colored noise with an unknown covariance matrix. In particular, we consider a scenario where m-dimensional p possible signal-plus-noise samples and m-dimensional n noise-only samples are available at the detector. Then the presence of a signal can be detected using the largest generalized eigenvalue (l.g.e.) of the so called whitened sample covariance matrix. This amounts to statistically characterizing the maximum eigenvalue of the deformed Jacobi unitary ensemble (JUE). To this end, we employ the powerful orthogonal polynomial approach to determine a new finite dimensional expression for the cumulative distribution function (c.d.f.) of the l.g.e. of the deformed JUE. This new c.d.f. expression facilitates the further analysis of the receiver operating characteristics (ROC) of the detector. It turns out that, for m=n, when m and p increase such that m/p attains a fixed value, there exists an optimal ROC profile corresponding to each fixed signal-to-noise ratio (SNR). In this respect, we have established a tight approximation for the corresponding optimal ROC profile.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Outage Analysis of $2\times2 $ MIMO-MRC in Correlated Rician Fading
Authors:
Prathapasinghe Dharmawansa,
Kumara Kahatapitiya,
Saman Atapattu,
Chintha Tellambura
Abstract:
This paper addresses one of the classical problems in random matrix theory-- finding the distribution of the maximum eigenvalue of the correlated Wishart unitary ensemble. In particular, we derive a new exact expression for the cumulative distribution function (c.d.f.) of the maximum eigenvalue of a $2\times 2$ correlated non-central Wishart matrix with rank-$1$ mean. By using this new result, we…
▽ More
This paper addresses one of the classical problems in random matrix theory-- finding the distribution of the maximum eigenvalue of the correlated Wishart unitary ensemble. In particular, we derive a new exact expression for the cumulative distribution function (c.d.f.) of the maximum eigenvalue of a $2\times 2$ correlated non-central Wishart matrix with rank-$1$ mean. By using this new result, we derive an exact analytical expression for the outage probability of $2\times 2$ multiple-input multiple-output maximum-ratio-combining (MIMO-MRC) in Rician fading with transmit correlation and a strong line-of-sight (LoS) component (rank-$1$ channel mean). We also show that the outage performance is affected by the relative alignment of the eigen-spaces of the mean and correlation matrices. In general, when the LoS path aligns with the least eigenvector of the correlation matrix, in the {\it high} transmit signal-to-noise ratio (SNR) regime, the outage gradually improves with the increasing correlation. Moreover, we show that as $K$ (Rician factor) grows large, the outage event can be approximately characterized by the c.d.f. of a certain Gaussian random variable.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Analysis and Rate Optimization of GFDM-based Cognitive Radios
Authors:
A. Mohammadian,
M. Baghani,
C. Tellambura
Abstract:
Generalized frequency division multiplexing (GFDM) is suitable for cognitive radio (CR) networks due to its low out-of-band (OOB) emission and high spectral efficiency. In this paper, we thus consider the use of GFDM to allow an unlicensed secondary user (SU) to access a spectrum hole. However, in an extremely congested spectrum scenario, both active incumbent primary users (PUs) on the left and r…
▽ More
Generalized frequency division multiplexing (GFDM) is suitable for cognitive radio (CR) networks due to its low out-of-band (OOB) emission and high spectral efficiency. In this paper, we thus consider the use of GFDM to allow an unlicensed secondary user (SU) to access a spectrum hole. However, in an extremely congested spectrum scenario, both active incumbent primary users (PUs) on the left and right channels of the spectrum hole will experience OOB interference. While constraining this interference, we thus investigate the problem of power allocation to the SU transmit subcarriers in order to maximize the overall data rate where the SU receiver is employing Matched filter (MF) and zero-forcing (ZF) structures. The power allocation problem is thus solved as a classic convex optimization problem. Finally, total transmission rate of GFDM is compared with that of orthogonal frequency division multiplexing (OFDM). For instance, when right and left interference temperature should be below 10 dBm, the capacity gain of GFDM over OFDM is 400 %.
△ Less
Submitted 8 March, 2018;
originally announced March 2018.
