-
Dynamic RF Beam Codebook Reduction for Cost-Efficient mmWave Full-Duplex Systems
Authors:
Gee Yong Suk,
Jongwoo Kwak,
Jaeyoung Choi,
Chan-Byoung Chae
Abstract:
The recent attempts to realize full-duplex (FD) communications in millimeter wave (mmWave) systems have garnered a significant amount of interest for its potential. In this paper, we present a cost-efficient design of mmWave FD systems, where the system dynamically reduces the RF beam codebook in a computationally efficient manner, so that it is comprised of the RF beams that will prevent the Rx r…
▽ More
The recent attempts to realize full-duplex (FD) communications in millimeter wave (mmWave) systems have garnered a significant amount of interest for its potential. In this paper, we present a cost-efficient design of mmWave FD systems, where the system dynamically reduces the RF beam codebook in a computationally efficient manner, so that it is comprised of the RF beams that will prevent the Rx receive chain from saturating due to the self-interference (SI). The analog beamformer will suppress the SI to the level that the residual SI can be completely removed with digital SI cancellation, allowing the digital beamformer to concentrate on the desired channel, free of the SI. To reduce the computation required for the proposed method, we propose two sufficient conditions that prevent the Rx side saturations, which are practically tight. Through performance valuations conducted in realistically modeled mmWave FD scenarios, we demonstrate that the proposed design achieves comparable performance with the ideal FD and other benchmarks with significantly lower costs.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Full Duplex Integrated Access and Backhaul for 5G NR: Analyses and Prototype Measurements
Authors:
Gee Yong Suk,
Soo-Min Kim,
Jongwoo Kwak,
Seop Hur,
Eunyong Kim,
Chan-Byoung Chae
Abstract:
Integrated access and backhaul (IAB) frameworks for 5G new radio (NR) as a cost-effective alternative to the wired backhaul have been investigated by 3GPP. A promising solution for this framework is the integration of full duplex (FD) technologies to enhance the spectral efficiency and make an efficient use of the network resources-termed FD IAB. However, FD IAB presents significant technical chal…
▽ More
Integrated access and backhaul (IAB) frameworks for 5G new radio (NR) as a cost-effective alternative to the wired backhaul have been investigated by 3GPP. A promising solution for this framework is the integration of full duplex (FD) technologies to enhance the spectral efficiency and make an efficient use of the network resources-termed FD IAB. However, FD IAB presents significant technical challenges, such as self-interference (SI) in the IAB framework, which may cast doubt over the feasibility of FD IAB. In this article, we present a brief tutorial of the FD IAB framework and its enabling technologies. We then numerically evaluate and discuss the link-level SI reduction and the system-level downlink throughput performance of the FD IAB. Finally, we validate the feasibility of FD IAB using 28 GHz hardware prototype measurements of propagation-domain SI suppression. Our numerical evaluations and prototype measurements confirm that the FD IAB serves as a promising framework for 5G NR.
△ Less
Submitted 31 May, 2021; v1 submitted 7 July, 2020;
originally announced July 2020.
-
RF Lens-Embedded Antenna Array for mmWave MIMO: Design and Performance
Authors:
Yae Jee Cho,
Gee-Yong Suk,
Byoungnam Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmW…
▽ More
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmWave demonstrates promising performance in achieving high gain and directivity by using phase shifters at the analog processing block. What remains a problem, however, is the actual implementation of mmWave beamforming systems; to fabricate such a system is costly and complex. With the aim of reducing such cost and complexity, this article presents actual prototypes of the lens antenna as an effective device to be used in the future 5G mmWave hybrid beamforming systems. Using a lens as a passive phase shifter enables beamforming without the heavy network of active phase shifters, while gain and directivity are achieved by the energy-focusing property of the lens. Proposed in this article are two types of lens antennas, one for static and the other for mobile usage. Their performance is evaluated using measurements and simulation data along with link-level analysis via a software defined radio (SDR) platform. Results show the promising potential of the lens antenna for its high gain and directivity, and its improved beam-switching feasibility compared to when a lens is not used. System-level evaluations reveal the significant throughput enhancement in both real indoor and outdoor environments. Moreover, the lens antenna's design issues are also discussed by evaluating different lens sizes.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
