-
Statistical Analysis of Geometric Algorithms in Vehicular Visible Light Positioning
Authors:
Burak Soner,
Sinem Coleri
Abstract:
Vehicular visible light positioning (VLP) methods find relative locations of vehicles by estimating the positions of intensity-modulated head/tail lights of one vehicle (target) with respect to another (ego). Estimation is done in two steps: 1) relative bearing or range of the transmitter-receiver link is measured over the received signal on the ego side, and 2) target position is estimated based…
▽ More
Vehicular visible light positioning (VLP) methods find relative locations of vehicles by estimating the positions of intensity-modulated head/tail lights of one vehicle (target) with respect to another (ego). Estimation is done in two steps: 1) relative bearing or range of the transmitter-receiver link is measured over the received signal on the ego side, and 2) target position is estimated based on those measurements using a geometric algorithm that expresses position coordinates in terms of the bearing-range parameters. The primary source of statistical error for these non-linear algorithms is the channel noise on the received signals that contaminates parameter measurements with varying levels of sensitivity. In this paper, we present two such geometric vehicular VLP algorithms that were previously unexplored, compare their performance with state-of-the-art algorithms over simulations, and analyze theoretical performance of all algorithms against statistical channel noise by deriving the respective Cramer-Rao lower bounds. The two newly explored algorithms do not outperform existing state-of-the-art, but we present them alongside the statistical analyses for the sake of completeness and to motivate further research in vehicular VLP. Our main finding is that direct bearing-based algorithms provide higher accuracy against noise for estimating lateral position coordinates, and range-based algorithms provide higher accuracy in the longitudinal axis due to the non-linearity of the respective geometric algorithms.
△ Less
Submitted 21 August, 2023;
originally announced August 2023.
-
Vehicular Visible Light Positioning for Collision Avoidance and Platooning: A Survey
Authors:
Burak Soner,
Merve Karakas,
Utku Noyan,
Furkan Sahbaz,
Sinem Coleri
Abstract:
Relative vehicle positioning methods can contribute to safer and more efficient autonomous driving by enabling collision avoidance and platooning applications. For full automation, these applications require cm-level positioning accuracy and greater than 50 Hz update rate. Since sensor-based methods (e.g., LIDAR, cameras) have not been able to reliably satisfy these requirements under all conditio…
▽ More
Relative vehicle positioning methods can contribute to safer and more efficient autonomous driving by enabling collision avoidance and platooning applications. For full automation, these applications require cm-level positioning accuracy and greater than 50 Hz update rate. Since sensor-based methods (e.g., LIDAR, cameras) have not been able to reliably satisfy these requirements under all conditions so far, complementary methods are sought. Recently, positioning based on visible light communication signals from vehicle head/tail LED lights (VLP) has shown significant promise as a complementary method attaining cm-level accuracy and near-kHz rate in realistic driving scenarios. Vehicular VLP methods measure relative bearing (angle) or range (distance) of transmitters (i.e., head/tail lights) based on received signals from on-board photodiodes and estimate transmitter relative positions based on those measurements. In this survey, we first review existing vehicular VLP methods and propose a new method that advances the state-of-the-art in positioning performance. Next, we analyze the theoretical and simulated performance of all methods in realistic driving scenarios under challenging noise and weather conditions, real asymmetric light beam patterns and different vehicle dimensions and light placements. Our simulation results show that the newly proposed VLP method is the overall best performer, and can indeed satisfy the accuracy and rate requirements for localization in collision avoidance and platooning applications within practical constraints. Finally, we discuss remaining open challenges that are faced for the deployment of VLP solutions in the automotive sector and further research questions.
△ Less
Submitted 2 November, 2023; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Vehicular Networks for Combating a Worldwide Pandemic: Preventing the Spread of COVID-19
Authors:
Ahmet M. Elbir,
Gokhan Gurbilek,
Burak Soner,
Anastasios K. Papazafeiropoulos,
Pandelis Kourtessis,
Sinem Coleri
Abstract:
As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Ther…
▽ More
As a worldwide pandemic, the coronavirus disease-19 (COVID-19) has caused serious restrictions in people's social life, along with the loss of lives, the collapse of economies and the disruption of humanitarian aids. Despite the advance of technological developments, we, as researchers, have witnessed that several issues need further investigation for a better response to a pandemic outbreak. Therefore, researchers recently started developing ideas to stop or at least reduce the spread of the pandemic. While there have been some prior works on wireless networks for combating a pandemic scenario, vehicular networks and their potential bottlenecks have not yet been fully examined. Furthermore, the vehicular scenarios can be identified as the locations, where the social distancing is mostly violated. With this motivation, this article provides an extensive discussion on vehicular networking for combating a pandemic. We provide the major applications of vehicular networking for combating COVID-19 in public transportation, in-vehicle diagnosis, border patrol and social distance monitoring. Next, we identify the unique characteristics of the collected data in terms of privacy, flexibility and coverage, then highlight corresponding future directions in privacy preservation, resource allocation, data caching and data routing. We believe that this work paves the way for the development of new products and algorithms that can facilitate the social life and help controlling the spread of the pandemic.
△ Less
Submitted 11 October, 2022; v1 submitted 15 October, 2020;
originally announced October 2020.
-
Visible Light Communication based Vehicle Localization for Collision Avoidance and Platooning
Authors:
Burak Soner,
Sinem Coleri
Abstract:
Collision avoidance and platooning applications require vehicle localization at cm-level accuracy and at least 50 Hz rate for full autonomy. The RADAR/LIDAR and camera based methods currently used for vehicle localization do not satisfy these requirements, necessitating complementary technologies. Visible light positioning (VLP) is a highly suitable complementary technology due to its high accurac…
▽ More
Collision avoidance and platooning applications require vehicle localization at cm-level accuracy and at least 50 Hz rate for full autonomy. The RADAR/LIDAR and camera based methods currently used for vehicle localization do not satisfy these requirements, necessitating complementary technologies. Visible light positioning (VLP) is a highly suitable complementary technology due to its high accuracy and high rate, exploiting the line-of-sight propagation feature of the visible light communication (VLC) signals from LED head/tail lights. However, existing vehicular VLP algorithms impose restrictive requirements, e.g., use of high-bandwidth circuits, road-side lights and certain VLC modulation strategies, and work for limited relative vehicle orientations, thus, are not feasible for general use. This paper proposes a VLC-based vehicle localization method that eliminates these restrictive requirements by a novel VLC receiver design and associated vehicular VLP algorithm. The VLC receiver, named QRX, is low-cost/size, and enables high-rate VLC and high-accuracy angle-of-arrival (AoA) measurement, simultaneously, via the usage of a quadrant photodiode. The VLP algorithm estimates the positions of two head/tail light VLC transmitters (TX) on a neighbouring vehicle by using AoA measurements from two QRXs for localization. The algorithm is theoretically analyzed by deriving its Cramer-Rao lower bound on positioning accuracy, and simulated localization performance is evaluated under realistic platooning and collision avoidance scenarios. Results demonstrate that the proposed method performs at cm-level accuracy and up to 250 Hz rate within a 10 m range under realistic harsh road and channel conditions, demonstrating its eligibility for collision avoidance and safe platooning.
△ Less
Submitted 29 January, 2021; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Federated Learning in Vehicular Networks
Authors:
Ahmet M. Elbir,
Burak Soner,
Sinem Coleri,
Deniz Gunduz,
Mehdi Bennis
Abstract:
Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server a…
▽ More
Machine learning (ML) has recently been adopted in vehicular networks for applications such as autonomous driving, road safety prediction and vehicular object detection, due to its model-free characteristic, allowing adaptive fast response. However, most of these ML applications employ centralized learning (CL), which brings significant overhead for data transmission between the parameter server and vehicular edge devices. Federated learning (FL) framework has been recently introduced as an efficient tool with the goal of reducing transmission overhead while achieving privacy through the transmission of model updates instead of the whole dataset. In this paper, we investigate the usage of FL over CL in vehicular network applications to develop intelligent transportation systems. We provide a comprehensive analysis on the feasibility of FL for the ML based vehicular applications, as well as investigating object detection by utilizing image-based datasets as a case study. Then, we identify the major challenges from both learning perspective, i.e., data labeling and model training, and from the communications point of view, i.e., data rate, reliability, transmission overhead, privacy and resource management. Finally, we highlight related future research directions for FL in vehicular networks.
△ Less
Submitted 16 July, 2022; v1 submitted 2 June, 2020;
originally announced June 2020.
-
Realizing a Low-Power Head-Mounted Phase-Only Holographic Display by Light-Weight Compression
Authors:
Burak Soner,
Erdem Ulusoy,
A. Murat Tekalp,
Hakan Urey
Abstract:
Head-mounted holographic displays (HMHD) are projected to be the first commercial realization of holographic video display systems. HMHDs use liquid crystal on silicon (LCoS) spatial light modulators (SLM), which are best suited to display phase-only holograms (POH). The performance/watt requirement of a monochrome, 60 fps Full HD, 2-eye, POH HMHD system is about 10 TFLOPS/W, which is orders of ma…
▽ More
Head-mounted holographic displays (HMHD) are projected to be the first commercial realization of holographic video display systems. HMHDs use liquid crystal on silicon (LCoS) spatial light modulators (SLM), which are best suited to display phase-only holograms (POH). The performance/watt requirement of a monochrome, 60 fps Full HD, 2-eye, POH HMHD system is about 10 TFLOPS/W, which is orders of magnitude higher than that is achievable by commercially available mobile processors. To mitigate this compute power constraint, display-ready POHs shall be generated on a nearby server and sent to the HMHD in compressed form over a wireless link. This paper discusses design of a feasible HMHD-based augmented reality system, focusing on compression requirements and per-pixel rate-distortion trade-off for transmission of display-ready POH from the server to HMHD. Since the decoder in the HMHD needs to operate on low power, only coding methods that have low-power decoder implementation are considered. Effects of 2D phase unwrapping and flat quantization on compression performance are also reported. We next propose a versatile PCM-POH codec with progressive quantization that can adapt to SLM-dynamic-range and available bitrate, and features per-pixel rate-distortion control to achieve acceptable POH quality at target rates of 60-200 Mbit/s that can be reliably achieved by current wireless technologies. Our results demonstrate feasibility of realizing a low-power, quality-ensured, multi-user, interactive HMHD augmented reality system with commercially available components using the proposed adaptive compression of display-ready POH with light-weight decoding.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
Empirical Feasibility Analysis for Energy Harvesting Intra-Vehicular Wireless Sensor Networks
Authors:
Mertkan Koca,
Gokhan Gurbilek,
Burak Soner,
Sinem Coleri
Abstract:
Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturin…
▽ More
Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturing and design costs. As an alternative, energy harvesting intra-vehicular wireless sensor networks (IVWSN) can accommodate nodes in all locations and they obviate the need for wiring, significantly lowering costs. In this paper, we empirically analyze the feasibility of such an IVWSN framework via extensive in-vehicle measurements for communications at 2.4 GHz, ultra wideband (UWB) and millimeter wave (mmWave) frequencies together with radio frequency (RF), thermal and vibration energy harvesting. Our analyses show that mmWave performs best for short line-of-sight (LoS) links in the engine compartment with performance close to UWB for LoS links in the chassis and passenger compartments in terms of worst case signal-to-interference-and-noise-ratio. For non-LoS links, which appear especially more in the engine compartment and chassis, UWB provides the highest security and reliability. 2.4 GHz suffers heavily from interference in all compartments while UWB utilizes narrowband suppression techniques at the cost of lower bandwidth; mmWave inherently experiences very low interference due to its propagation characteristics. On the other hand, RF energy harvesting provides up to 1 mW of power in all compartments. Vibration and thermal energy harvesters can supply all nodes consuming <10 mW in the engine compartment and all <5 mW nodes in the chassis. In the passenger compartment, thermal harvesting is not available due to low temperature gradients but vibration and RF sources can supply <1 mW nodes.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
