-
A Complex-Valued Feedback Linearization-Based Controller for a Voltage Source Inverter Tied to the Grid via a Second-Order Filter
Authors:
Gerardo Tapia-Otaegui,
Jorge A. Solsona,
Sebastian Gomez Jorge,
Ana Susperregui,
Claudio A. Busada,
M. Itsaso Martínez
Abstract:
In this document, a nonlinear control law for a grid-tied converter is introduced. The converter topology consists of a voltage source inverter (VSI) linked to the grid through an inductive-capacitive second-order filter, its input being connected to a capacitive DC-link supplied by a renewable energy-based input power source. In order to achieve good performance in presence of large state excursi…
▽ More
In this document, a nonlinear control law for a grid-tied converter is introduced. The converter topology consists of a voltage source inverter (VSI) linked to the grid through an inductive-capacitive second-order filter, its input being connected to a capacitive DC-link supplied by a renewable energy-based input power source. In order to achieve good performance in presence of large state excursions caused mainly by substantial set-point modifications and/or considerable disturbances, a nonlinear control law based on a complex-valued feedback linearization strategy is designed. Specifically, a flat output is adopted, which is given by the summation of the energy stored in the DC-link capacitor and in the output filter's inductor and capacitor, as well as by the reactive energy at the output. After linearizing the system through a pertinent coordinate transformation and a nonlinear feedback, a linear trajectory tracking control law is implemented. The performance of the system controlled by applying the proposed strategy is tested via simulation for a very weak grid of unity X/R ratio, yielding satisfactory results.
△ Less
Submitted 25 February, 2025;
originally announced February 2025.
-
Non-linear Control of the Power Injected Into a Weak Grid by a Self-Synchronized Inverter
Authors:
Sebastian Gomez Jorge,
Jorge A. Solsona,
Claudio A. Busada,
Leire C. Aguirre-Larrayoz,
M. Itsaso Martínez,
Gerardo Tapia-Otaegui
Abstract:
In this work, a non-linear controller designed using non-linear transformation linearization and feedback is proposed for an inverter connected to a weak grid through a single-stage inductive filter. The proposed strategy is self-synchronized, so that it is not necessary to have a voltage sensor at the Point of Common Coupling (PCC). The strategy allows to robustify, in the presence of a weak grid…
▽ More
In this work, a non-linear controller designed using non-linear transformation linearization and feedback is proposed for an inverter connected to a weak grid through a single-stage inductive filter. The proposed strategy is self-synchronized, so that it is not necessary to have a voltage sensor at the Point of Common Coupling (PCC). The strategy allows to robustify, in the presence of a weak grid, a strategy that has already been demonstrated to allow a significant reduction in the size of the DC-link capacitor of the converter. For this purpose, a state observer is designed that allows estimating the voltage at the PCC from the measurement of the output inductor current. A start-up controller is also included, which allows synchronization even in the case of system start-up. Simulation results are presented for different operating cases, including start-up, normal operation, and grid-voltage sags and swells. In all these cases, it is considered that the exact parameters of the grid to which the inverter is connected are unknown.
△ Less
Submitted 9 October, 2024;
originally announced October 2024.
-
Power Control of Converters Connected via an L Filter to a Weak Grid. A Flatness-Based Approach
Authors:
Sebastian Gomez Jorge,
Jorge A. Solsona,
Claudio A. Busada,
Gerardo Tapia-Otaegui,
Ana Susperregui,
M. Itsaso Martínez
Abstract:
In this article, a nonlinear strategy based on a flatness approach is used for controlling the instantaneous complex power supplied from the Point of Common Coupling (PCC) to a weak grid. To this end, the strategy introduced by the authors in [1] considering a strong grid is robustified for avoiding system instability when the converter is connected to an unknown grid. The robustification method c…
▽ More
In this article, a nonlinear strategy based on a flatness approach is used for controlling the instantaneous complex power supplied from the Point of Common Coupling (PCC) to a weak grid. To this end, the strategy introduced by the authors in [1] considering a strong grid is robustified for avoiding system instability when the converter is connected to an unknown grid. The robustification method consists of including a notch filter that estimates the PCC voltage and using it to build the controller (i.e. the measured PCC voltage used to design the control strategy for a strong grid is replaced by the PCC voltage estimated with the notch filter). In addition, before designing the controller, the steady-state stability and safe operation limits when injecting complex instantaneous power to a grid of unknown impedance are analyzed. This analysis is independent of the control strategy, and applies to all power injection schemes.
Simulations are presented for showing the performance of the proposed controller in presence of a weak grid.
△ Less
Submitted 9 September, 2024;
originally announced September 2024.
