-
Channel Sparsity Variation and Model-Based Analysis on 6, 26, and 132 GHz Measurements
Authors:
Ximan Liu,
Jianhua Zhang,
Pan Tang,
Lei Tian,
Harsh Tataria,
Shu Sun,
Mansoor Shafi
Abstract:
In this paper, the level of sparsity is examined at 6, 26, and 132 GHz carrier frequencies by conducting channel measurements in an indoor office environment. By using the Gini index (value between 0 and 1) as a metric for characterizing sparsity, we show that increasing carrier frequency leads to increased levels of sparsity. The measured channel impulse responses are used to derive a Third-Gener…
▽ More
In this paper, the level of sparsity is examined at 6, 26, and 132 GHz carrier frequencies by conducting channel measurements in an indoor office environment. By using the Gini index (value between 0 and 1) as a metric for characterizing sparsity, we show that increasing carrier frequency leads to increased levels of sparsity. The measured channel impulse responses are used to derive a Third-Generation Partnership Project (3GPP)-style propagation model, used to calculate the Gini index for the comparison of the channel sparsity between the measurement and simulation based on the 3GPP model. Our results show that the mean value of the Gini index in measurement is over twice the value in simulation, implying that the 3GPP channel model does not capture the effects of sparsity in the delay domain as frequency increases. In addition, a new intra-cluster power allocation model based on measurements is proposed to characterize the effects of sparsity in the delay domain of the 3GPP channel model. The accuracy of the proposed model is analyzed using theoretical derivations and simulations. Using the derived intra-cluster power allocation model, the mean value of the Gini index is 0.97, while the spread of variability is restricted to 0.01, demonstrating that the proposed model is suitable for 3GPP-type channels. To our best knowledge, this paper is the first to perform measurements and analysis at three different frequencies for the evaluation of channel sparsity in the same environment.
△ Less
Submitted 17 February, 2023;
originally announced February 2023.
-
Massive MIMO Evolution Towards 3GPP Release 18
Authors:
Huangping Jin,
Kunpeng Liu,
Gilwon Lee,
Emad J. Farag,
Min Zhang,
Dalin Zhu,
Leiming Zhang,
Eko Onggosanusi,
Mansoor Shafi,
Harsh Tataria
Abstract:
Since the introduction of fifth-generation new radio (5G-NR) in Third Generation Partnership Project (3GPP) Release 15, swift progress has been made to evolve 5G with 3GPP Release 18 emerging. A critical aspect is the design of massive multiple-input multiple-output (MIMO) technology. In this line, this paper makes several important contributions: We provide a comprehensive overview of the evoluti…
▽ More
Since the introduction of fifth-generation new radio (5G-NR) in Third Generation Partnership Project (3GPP) Release 15, swift progress has been made to evolve 5G with 3GPP Release 18 emerging. A critical aspect is the design of massive multiple-input multiple-output (MIMO) technology. In this line, this paper makes several important contributions: We provide a comprehensive overview of the evolution of standardized massive MIMO features from 3GPP Release 15 to 17 for both time/frequency-division duplex operation across bands FR-1 and FR-2. We analyze the progress on channel state information (CSI) frameworks, beam management frameworks and present enhancements for uplink CSI. We shed light on emerging 3GPP Release 18 problems requiring imminent attention. These include advanced codebook design and sounding reference signal design for coherent joint transmission (CJT) with multiple transmission/reception points (multi- TRPs). We discuss advancements in uplink demodulation reference signal design, enhancements for mobility to provide accurate CSI estimates, and unified transmission configuration indicator framework tailored for FR-2 bands. For each concept, we provide system level simulation results to highlight their performance benefits. Via field trials in an outdoor environment at Shanghai Jiaotong University, we demonstrate the gains of multi-TRP CJT relative to single TRP at 3.7 GHz.
△ Less
Submitted 15 October, 2022;
originally announced October 2022.
-
6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities
Authors:
Harsh Tataria,
Mansoor Shafi,
Andreas F. Molisch,
Mischa Dohler,
Henrik Sjöland,
Fredrik Tufvesson
Abstract:
Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published…
▽ More
Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.
△ Less
Submitted 18 March, 2021; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Standardization of Propagation Models: 800 MHz to 100 GHz -- A Historical Perspective
Authors:
Harsh Tataria,
Katsuyuki Haneda,
Andreas F. Molisch,
Mansoor Shafi,
Fredrik Tufvesson
Abstract:
Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations,…
▽ More
Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations, from supporting voice applications to enhanced mobile broadband. To meet the ever increasing data rate demands of wireless systems, frequency bands covering a wide range from 800 MHz to 100 GHz have been allocated for use. The standardization of these systems started in the early/mid 1980's in Europe by the European Telecommunications Standards Institute with the advent of Global System for Mobile Communications. This motivated the development of the first standardized propagation model by the European Cooperation in Science and Technology (COST) 207 working group. These standardization activities were continued and expanded for the third, fourth, and fifth generations of COST, as well as by the Third Generation Partnership Project, and the International Telecommunication Union. This paper presents a historical overview of the standardized propagation models covering first to fifth-generation systems. In particular, we discuss the evolution and standardization of pathloss models, as well as large and small-scale fading parameters for single antenna and multiple antenna systems. Furthermore, we present insights into the progress of deterministic modelling across the five generations of systems, as well as discuss more advanced modelling components needed for the detailed simulations of millimeter-wave channels. A comprehensive bibliography at the end of the paper will aid the interested reader to dig deeper.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Real-Time Deployment Aspects of C-Band and Millimeter-Wave 5G-NR Systems
Authors:
Mansoor Shafi,
Harsh Tataria,
Andreas F. Molisch,
Fredrik Tufvesson,
Geoff Tunnicliffe
Abstract:
Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences…
▽ More
Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences in the frequency bands, both systems are expected to be designed with different transmit and receive parameters, naturally resulting in performance variations proportional to the chosen parameters. Unlike many previous works, this paper presents measurement evaluations in central Auckland, New Zealand, from a pre-commercial deployment of a single-user, single-cell 5G-NR system operating in both bands. The net throughput, coverage reliability, and channel rank are analyzed across the two bands with baseband and analog beamforming. Our results show that the C-band coverage is considerably better than mmWave, with a consistently higher channel rank. Furthermore, the spatial stationarity region (SSR) for the azimuth angles-of-departure (AODs) is characterized, and a model derived from the measured beam identities is presented. The SSR of azimuth AODs is seen to closely follow a gamma distribution.
△ Less
Submitted 31 January, 2020;
originally announced January 2020.
-
Realisation of Highly Precise and Low Power Tunable Voltage Amplifier Based on the Translinear Circuit Scheme of CCCII+
Authors:
Umar Mohammad,
Mir Aamir Shafi
Abstract:
In the past few years, advancements in the field of nano circuit design has become tougher than the demand. Low power devices have emerged tremendously.Both voltage mode aswell as current mode devices have proven alternative to each other for satisfying the demand of the growing market. As such, current conveyors have equitably established their uniqueness as an important circuit design element. T…
▽ More
In the past few years, advancements in the field of nano circuit design has become tougher than the demand. Low power devices have emerged tremendously.Both voltage mode aswell as current mode devices have proven alternative to each other for satisfying the demand of the growing market. As such, current conveyors have equitably established their uniqueness as an important circuit design element. The literature available to us during the few years in the field of analog VLSI design, quotes a huge number of application elements based on current conveyors. Likely, in this paper, a new tunable low power voltage amplifier based on the translinear circuit scheme of second generation current controlled current conveyor has been proposed. The modeling of the circuit presented in this paper employs the minimum number of passive elements. The magnitude of the tuning or the amplitude of the voltage presented here, is being controlled by means of two variable resistors. Current conveyor second generation translinear circuit scheme is taken into consideration to implement the proposed tunable voltage amplifier. CCCII works on the outlines of low power and low voltage design. Tunable voltage amplifiers find use in analog as well as in digital signal processing applications.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
