Showing 1–50 of 58 results for author: Sezgin, A

Optimized Frequency-Diverse Movable Antenna Arrays for Directional Secrecy in Wireless Systems

Authors: Chu Li, Marjan Boloori, Eduard Jorswieck, Aydin Sezgin

Abstract: Movable-antenna (MA) arrays are envisioned as a promising technique for enhancing secrecy performance in wireless communications by leveraging additional spatial degrees of freedom. However, when the eavesdropper is located in the same direction as the legitimate user, particularly in mmWave/THz bands where line-of-sight (LOS) propagation dominates, the secrecy performance of MA arrays becomes sig… ▽ More Movable-antenna (MA) arrays are envisioned as a promising technique for enhancing secrecy performance in wireless communications by leveraging additional spatial degrees of freedom. However, when the eavesdropper is located in the same direction as the legitimate user, particularly in mmWave/THz bands where line-of-sight (LOS) propagation dominates, the secrecy performance of MA arrays becomes significantly limited, thus directionally insecure. To address this challenge, we employ a joint design that combines an MA array with a frequency-diverse array (FDA) at the transmitter to secure the transmission across both range and direction. Specifically, we derive closed-form expressions for the optimal antenna positions and frequency shifts, assuming small perturbations in both parameters from a linear frequency-diverse MA configuration. Furthermore, we compare the worst-case secrecy rate under this minor perturbation assumption with that obtained under a general constraint, where simulated annealing is employed to numerically determine the optimal parameters. Simulation results confirm that the proposed optimized frequency diverse MA approach significantly enhances secrecy performance in the presence of an eavesdropper aligned with the direction of the legitimate receiver. △ Less

Submitted 30 June, 2025; originally announced June 2025.

When Every Symbol Counts: Resilient Wireless Systems Under Finite Blocklength Constraints

Authors: Kevin Weinberger, Aydin Sezgin

Abstract: As 6G evolves, wireless networks become essential for critical operations and enable innovative applications that demand seamless adaptation to dynamic environments and disruptions. Because these vital services require uninterrupted operation, their resilience to unforeseen disruptions is essential. However, implementing resilience necessitates rapid recovery procedures, which operate in the finit… ▽ More As 6G evolves, wireless networks become essential for critical operations and enable innovative applications that demand seamless adaptation to dynamic environments and disruptions. Because these vital services require uninterrupted operation, their resilience to unforeseen disruptions is essential. However, implementing resilience necessitates rapid recovery procedures, which operate in the finite blocklength (FBL) regime, where short packets and added error-correction overhead can severely degrade communication efficiency. Due to this performance loss, always attempting recovery can backfire and result in worse outcomes than simply enduring the disruption under longer blocklengths. In this work, we study these effects of FBL constraints within a resilience framework, incorporating reconfigurable intelligent surfaces (RIS) to enhance adaptation capabilities. By actively shaping the wireless environment, RIS help counteract some of the performance losses caused by FBL, enabling more effective recovery from disruptions. Numerical results reveal two critical blocklength thresholds: the first enables full recovery from the FBL penalty, while the second, at a higher blocklength, allows the system to recover from both the FBL penalty and the initial disruption, yielding a significant improvement in resilience performance. Additionally, we show that the number of RIS elements shifts these thresholds, enabling faster reconfiguration with shorter blocklengths and providing insights to the trade-offs between rate, blocklength, and reconfiguration effort under FBL conditions. △ Less

Submitted 26 June, 2025; originally announced June 2025.

Comments: 6 pages, 3 figures, submitted to European Wireless 2025. arXiv admin note: text overlap with arXiv:2504.11589

Anomaly Detection for Sensing Security

Authors: Stefan Roth, Aydin Sezgin

Abstract: Various approaches in the field of physical layer security involve anomaly detection, such as physical layer authentication, sensing attacks, and anti-tampering solutions. Depending on the context in which these approaches are applied, anomaly detection needs to be computationally lightweight, resilient to changes in temperature and environment, and robust against phase noise. We adapt moving aver… ▽ More Various approaches in the field of physical layer security involve anomaly detection, such as physical layer authentication, sensing attacks, and anti-tampering solutions. Depending on the context in which these approaches are applied, anomaly detection needs to be computationally lightweight, resilient to changes in temperature and environment, and robust against phase noise. We adapt moving average filters, autoregression filters and Kalman filters to provide predictions of feature vectors that fulfill the above criteria. Different hypothesis test designs are employed that allow omnidirectional and unidirectional outlier detection. In a case study, a sensing attack is investigated that employs the described algorithms with various channel features based on commodity WiFi devices. Thereby, various combinations of algorithms and channel features show effectiveness for motion detection by an attacker. Countermeasures only utilizing transmit power randomization are shown insufficient to mitigate such attacks if the attacker has access to channel state information (CSI) measurements, suggesting that mitigation solutions might require frequency-variant randomization. △ Less

Submitted 12 June, 2025; originally announced June 2025.

Accelerated Recovery with RIS: Designing Wireless Resilience in Mission-Critical Environments

Authors: Kevin Weinberger, Robert-Jeron Reifert, Aydin Sezgin, Mehdi Bennis

Abstract: As 6G and beyond redefine connectivity, wireless networks become the foundation of critical operations, making resilience more essential than ever. With this shift, wireless systems cannot only take on vital services previously handled by wired infrastructures but also enable novel innovative applications that would not be possible with wired systems. As a result, there is a pressing demand for st… ▽ More As 6G and beyond redefine connectivity, wireless networks become the foundation of critical operations, making resilience more essential than ever. With this shift, wireless systems cannot only take on vital services previously handled by wired infrastructures but also enable novel innovative applications that would not be possible with wired systems. As a result, there is a pressing demand for strategies that can adapt to dynamic channel conditions, interference, and unforeseen disruptions, ensuring seamless and reliable performance in an increasingly complex environment. Despite considerable research, existing resilience assessments lack comprehensive key performance indicators (KPIs), especially those quantifying its adaptability, which are vital for identifying a system's capacity to rapidly adapt and reallocate resources. In this work, we bridge this gap by proposing a novel framework that explicitly quantifies the adaption performance by augmenting the gradient of the system's rate function. To further enhance the network resilience, we integrate Reconfigurable Intelligent Surfaces (RISs) into our framework due to their capability to dynamically reshape the propagation environment while providing alternative channel paths. Numerical results show that gradient augmentation enhances resilience by improving adaptability under adverse conditions while proactively preparing for future disruptions. △ Less

Submitted 15 April, 2025; originally announced April 2025.

Comments: 6 pages, 3 figures, submitted to Globecom 2025

Towards Smarter Sensing: 2D Clutter Mitigation in RL-Driven Cognitive MIMO Radar

Authors: Adam Umra, Aya Mostafa Ahmed, Aydin Sezgin

Abstract: Motivated by the growing interest in integrated sensing and communication for 6th generation (6G) networks, this paper presents a cognitive Multiple-Input Multiple-Output (MIMO) radar system enhanced by reinforcement learning (RL) for robust multitarget detection in dynamic environments. The system employs a planar array configuration and adapts its transmitted waveforms and beamforming patterns t… ▽ More Motivated by the growing interest in integrated sensing and communication for 6th generation (6G) networks, this paper presents a cognitive Multiple-Input Multiple-Output (MIMO) radar system enhanced by reinforcement learning (RL) for robust multitarget detection in dynamic environments. The system employs a planar array configuration and adapts its transmitted waveforms and beamforming patterns to optimize detection performance in the presence of unknown two-dimensional (2D) disturbances. A robust Wald-type detector is integrated with a SARSA-based RL algorithm, enabling the radar to learn and adapt to complex clutter environments modeled by a 2D autoregressive process. Simulation results demonstrate significant improvements in detection probability compared to omnidirectional methods, particularly for low Signal-to-Noise Ratio (SNR) targets masked by clutter. △ Less

Submitted 7 February, 2025; originally announced February 2025.

Comments: 6 pages, 8 figures. Submitted to EuCNC 2025

The Wideband Analysis of the Impact of I/Q Imbalance on THz Communication

Authors: Dogus Can Sevdiren, Aydin Sezgin, Mohammad Soleymani

Abstract: The terahertz (THz) band is a promising solution to the increasing data traffic demands of future wireless networks. However, developing transceivers for THz communication is a complex and toilsome task due to the difficulty in designing devices that operate at this frequency and the impact of hardware impairments on performance. This paper investigates the impact of radio frequency (RF) impairmen… ▽ More The terahertz (THz) band is a promising solution to the increasing data traffic demands of future wireless networks. However, developing transceivers for THz communication is a complex and toilsome task due to the difficulty in designing devices that operate at this frequency and the impact of hardware impairments on performance. This paper investigates the impact of radio frequency (RF) impairment, in-phase/quadrature imbalance (IQI). To this end, we express an IQI model for the THzspecific array-of-subarrays (AoSA) architecture considering the unique features of THz communication; vast bandwidth, severe power drawdown, and pencil-like beams. We further model the impact of IQI in the power limited regime in order to investigate the power and ultra-wideband trade-off. To achieve this, we express the spectral efficiency in terms of wideband slope and bit energy to noise ratio which are the two important information theoretic metrics that reveals the performance of the ultrawideband systems as in THz communication. Our results show that THz systems with IQI have a strict limit in achievable rate although they provide immense spectrum. We also demonstrate with our simulation results that compared to low frequencies, IQI is a more serious concern in THz links. △ Less

Submitted 7 February, 2025; originally announced February 2025.

Terahertz Defect Detection in Multi-Layer Materials Using Echo Labeling

Authors: Dogus Can Sevdiren, Furkan H. Ilgac, Aydin Sezgin

Abstract: Non-destructive testing is an important technique for detecting defects in multi-layer materials, enabling the evaluation of structural integrity without causing damage on test materials. Terahertz time-domain spectroscopy (THz-TDS) offers unique capabilities for this purpose due to its sensitivity and resolution. Inspired by room geometry estimation methods in acoustic signal processing, this wor… ▽ More Non-destructive testing is an important technique for detecting defects in multi-layer materials, enabling the evaluation of structural integrity without causing damage on test materials. Terahertz time-domain spectroscopy (THz-TDS) offers unique capabilities for this purpose due to its sensitivity and resolution. Inspired by room geometry estimation methods in acoustic signal processing, this work proposes a novel approach for defect detection in multi-layer composite materials using THz-TDS, enhanced by high-power sources. The proposed method utilizes Euclidean distance matrices to reduce problem complexity compared to state-of-the-art approaches, and effectively distinguishes and maps higher-order reflections from sublayers, enabling precise defect localization in composite materials without artifacts. △ Less

Submitted 7 February, 2025; v1 submitted 6 February, 2025; originally announced February 2025.

Comments: 4 pages, 5 figures

Single Antenna Terahertz Sensing using Preconfigured Metasurfaces

Authors: Furkan Ilgac, Aydin Sezgin

Abstract: The development of mobile terahertz (THz) sensing and localization with minimal infrastructure has garnered significant attention due to its substantial practical implications. Single-antenna radar systems are a favored choice for mobile platforms, as they offer notable advantages in terms of cost, weight, and simplicity. However, these systems face a critical limitation: the inability to extract… ▽ More The development of mobile terahertz (THz) sensing and localization with minimal infrastructure has garnered significant attention due to its substantial practical implications. Single-antenna radar systems are a favored choice for mobile platforms, as they offer notable advantages in terms of cost, weight, and simplicity. However, these systems face a critical limitation: the inability to extract angular information using a single antenna, which consequently prevents the achievement of complete localization. This paper proposes an angular estimation method for a single-antenna radar augmented with a pair of preconfigured metasurfaces. The metasurface pair is used for creating an interference pattern in the scene, which depends on the target angles and operating frequency. Moreover, the beam squint effects caused by the wide frequency range in the THz band provides suitable conditions for using sparse reconstruction techniques to obtain angular estimates. We utilize these properties to perform angular estimation with a single antenna. The simulation results show that with this method it is possible to perform fast and accurate multi-target estimation for a broad operating range. △ Less

Submitted 5 February, 2025; originally announced February 2025.

Comments: 5 pages, 7 figures

RIS-Aided Radar Imaging Utilizing the Virtual Source Principle

Authors: Furkan H. Ilgac, Mounia Bouabdellah, Aydin Sezgin

Abstract: This paper investigates signle-antenna radar imaging with a reconfigurable intelligent surface (RIS). Configuring phase shifts in a RIS-aided radar system can be thought as synthetic aperture radar (SAR) imaging with a moving virtual source. With this perspective, the problem is modeled in the wavenumber domain and image forming algorithms are formulated for near and far field regions. Thus, a nov… ▽ More This paper investigates signle-antenna radar imaging with a reconfigurable intelligent surface (RIS). Configuring phase shifts in a RIS-aided radar system can be thought as synthetic aperture radar (SAR) imaging with a moving virtual source. With this perspective, the problem is modeled in the wavenumber domain and image forming algorithms are formulated for near and far field regions. Thus, a novel and intuitive perspective has been introduced to the RIS-aided radar imaging formation problem, opening a new avenue for adapting well-known SAR methods in the literature to these systems. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Comments: 6 pages, 8 figures, submitted to ICC 2025

Covertness in the Near Field: Maximizing the Covert Region with FDA

Authors: Fatemeh Lotfi, Stefan Roth, Anas Chaaban, Aydin Sezgin

Abstract: Covert communication in wireless networks ensures that transmissions remain undetectable to adversaries, making it a potential enabler for privacy and security in sensitive applications. However, to meet the high performance and connectivity demands of sixth-generation (6G) networks, future wireless systems will require larger antenna arrays, higher operating frequencies, and advanced antenna arch… ▽ More Covert communication in wireless networks ensures that transmissions remain undetectable to adversaries, making it a potential enabler for privacy and security in sensitive applications. However, to meet the high performance and connectivity demands of sixth-generation (6G) networks, future wireless systems will require larger antenna arrays, higher operating frequencies, and advanced antenna architectures. This shift changes the propagation model from far-field planar-wave to near-field spherical-wave which necessitates a redesign of existing covert communication systems. Unlike far-field beamforming, which relies only on direction, near-field beamforming depends on both distance and direction, providing additional degrees of freedom for system design. In this paper, we aim to utilize those freedoms by proposing near-field Frequency Diverse Array (FDA)-based transmission strategies that manipulate the beampattern in both distance and angle, thereby establishing a non-covert region around the legitimate user. Our approach takes advantage of near-field properties and FDA technology to significantly reduce the area vulnerable to detection by adversaries while maintaining covert communication with the legitimate receiver. Numerical simulations show that our methods outperform conventional phased arrays by shrinking the non-covert region and allowing the covert region to expand as the number of antennas increases. △ Less

Submitted 22 November, 2024; originally announced November 2024.

Uncertainty Propagation and Minimization for Channel Estimation in UAV-mounted RIS Systems

Authors: Kevin Weinberger, David Müller, Martin Mönnigmann, Aydin Sezgin

Abstract: Reconfigurable Intelligent Surfaces (RIS) are emerging as a key technology for sixth-generation (6G) wireless networks, leveraging adjustable reflecting elements to dynamically control electromagnetic wave propagation and optimize wireless connectivity. By positioning the RIS on an unmanned aerial vehicle (UAV), it can maintain line-of-sight and proximity to both the transmitter and receiver, crit… ▽ More Reconfigurable Intelligent Surfaces (RIS) are emerging as a key technology for sixth-generation (6G) wireless networks, leveraging adjustable reflecting elements to dynamically control electromagnetic wave propagation and optimize wireless connectivity. By positioning the RIS on an unmanned aerial vehicle (UAV), it can maintain line-of-sight and proximity to both the transmitter and receiver, critical factors that mitigate path loss and enhance signal strength. The lightweight, power-efficient nature of RIS makes UAV integration feasible, yet the setup faces significant disturbances from UAV motion, which can degrade RIS alignment and link performance. In this study, we address these challenges using both experimental measurements and analytical methods. Using an extended Kalman filter (EKF), we estimate the UAV's orientation in real time during experimental flights to capture real disturbance effects. The resulting orientation uncertainty is then propagated to the RIS's channel estimates by applying the Guide to the Expression of Uncertainty in Measurement (GUM) framework as well as complex-valued propagation techniques to accurately assess and minimize the impact of UAV orientation uncertainties on RIS performance. This method enables us to systematically trace and quantify how orientation uncertainties affect channel gain and phase stability in real-time. Through numerical simulations, we find that the uncertainty of the RIS channel link is influenced by the RIS's configuration. Furthermore, our results demonstrate that the uncertainty area is most accurately represented by an annular section, enabling a 58% reduction in the uncertainty area while maintaining a 95% coverage probability. △ Less

Submitted 18 November, 2024; originally announced November 2024.

Comments: 6 pages, 3 figures, submitted to IEEE International Conference on Communications 2025

Robust Communication Design in RIS-Assisted THz Channels

Authors: Yasemin Karacora, Adam Umra, Aydin Sezgin

Abstract: Terahertz (THz) communication offers the necessary bandwidth to meet the high data rate demands of next-generation wireless systems. However, it faces significant challenges, including severe path loss, dynamic blockages, and beam misalignment, which jeopardize communication reliability. Given that many 6G use cases require both high data rates and strong reliability, robust transmission schemes t… ▽ More Terahertz (THz) communication offers the necessary bandwidth to meet the high data rate demands of next-generation wireless systems. However, it faces significant challenges, including severe path loss, dynamic blockages, and beam misalignment, which jeopardize communication reliability. Given that many 6G use cases require both high data rates and strong reliability, robust transmission schemes that achieve high throughput under these challenging conditions are essential for the effective use of high-frequency bands. In this context, we propose a novel mixed-criticality superposition coding scheme for reconfigurable intelligent surface (RIS)-assisted THz systems. This scheme leverages both the strong but intermittent direct line-of-sight link and the more reliable, yet weaker, RIS path to ensure robust delivery of high-criticality data while maintaining high overall throughput. We model a mixed-criticality queuing system and optimize transmit power to meet reliability and queue stability constraints. Simulation results show that our approach significantly reduces queuing delays for critical data while sustaining high overall throughput, outperforming conventional time-sharing methods. Additionally, we examine the impact of blockage, beam misalignment, and beamwidth adaptation on system performance. These results demonstrate that our scheme effectively balances reliability and throughput under challenging conditions, while also underscoring the need for robust beamforming techniques to mitigate the impact of misalignment in RIS-assisted channels. △ Less

Submitted 15 November, 2024; originally announced November 2024.

Comments: 12 pages, 10 figures. Invited paper, submitted to the IEEE Open Journal of the Communication Society (OJ-COMS)

Wireless Localization with Space-Time Coded Reconfigurable Intelligent Surfaces

Authors: Mehdi Gholami, Soheil Khajavi, Mohammad Neshat, Simon Tewes, Aydin Sezgin

Abstract: In this paper, a novel approach for wireless localization is proposed and experimentally validated that leverages space-time coded reconfigurable intelligent surfaces (RIS). It is demonstrated that applying proper single-bit codes to each RIS element, enables accurate determination of the direction of arrival (AOA) at the receiver. Moreover, we introduce different scenarios that such technique can… ▽ More In this paper, a novel approach for wireless localization is proposed and experimentally validated that leverages space-time coded reconfigurable intelligent surfaces (RIS). It is demonstrated that applying proper single-bit codes to each RIS element, enables accurate determination of the direction of arrival (AOA) at the receiver. Moreover, we introduce different scenarios that such technique can be used for localization. By incorporating RIS, a passive component, the method significantly reduces the complexity found in previous localization techniques. Additionally, the use of 1-bit codes minimizes hardware requirements, offering a reliable, low-cost solution for localization in advanced telecommunications networks. △ Less

Submitted 27 October, 2024; originally announced October 2024.

Realization of Reconfigurable Intelligent Surfaces with Space-Time Coded Metasurfaces

Authors: Mehdi Gholami, Soheil Khajavi, Mohammad Neshat, Simon Tewes, Aydin Sezgin

Abstract: This paper presents experimental realization of a reconfigurable intelligent surface (RIS) using space-time coding metasurfaces to enable concurrent beam steering and data modulation. The proposed approach harnesses the capabilities of metasurfaces, allowing precise temporal control over individual unit cells of the RIS. We show that by employing proper binary codes manipulating the state of unit… ▽ More This paper presents experimental realization of a reconfigurable intelligent surface (RIS) using space-time coding metasurfaces to enable concurrent beam steering and data modulation. The proposed approach harnesses the capabilities of metasurfaces, allowing precise temporal control over individual unit cells of the RIS. We show that by employing proper binary codes manipulating the state of unit cells, the RIS can act as a digital data modulator with beam steering capability. We describe the experimental setup and computational tools, followed by validation through harmonic generation and investigation of beam steering and data modulation. Additionally, four digital modulation schemes are evaluated. By implementing customized binary codes, constellations under varying conditions are compared, showcasing the potential for real-world applications. This study offers new insights into the practical implementation of RIS for advanced wireless communication systems. △ Less

Submitted 27 October, 2024; originally announced October 2024.

A Structural Analysis of the User Behavior Dynamics for Environmentally Sustainable ICT

Authors: Stefan Roth, Aydin Sezgin

Abstract: The sector of information and communication technology (ICT) can contribute to the fulfillment of the Paris agreement and the sustainable development goals (SDGs) through the introduction of sustainability strategies. For environmental sustainability, such strategies should contain efficiency, sufficiency, and consistency measures. To propose such, a structural analysis of ICT is undertaken in thi… ▽ More The sector of information and communication technology (ICT) can contribute to the fulfillment of the Paris agreement and the sustainable development goals (SDGs) through the introduction of sustainability strategies. For environmental sustainability, such strategies should contain efficiency, sufficiency, and consistency measures. To propose such, a structural analysis of ICT is undertaken in this manuscript. Thereby, key mechanisms and dynamics behind the usage of ICT and the corresponding energy and resource use are analyzed by describing ICT as a complex system. The system contains data centers, communication networks, smartphone hardware, apps, and the behavior of the users as sub-systems, between which various Morinian interactions are present. Energy and non-energy resources can be seen as inputs of the system, while e-waste is an output. Based on the system description, we propose multiple measures for efficiency, sufficiency and consistency to reduce greenhouse gas emissions and other environmental impacts. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Optimizing Energy Efficiency with RSMA: Balancing Low and High QoS Requirements

Authors: Srivardhan Sivadevuni, Kevin Weinberger, Aydin Sezgin

Abstract: Future wireless systems are expected to deliver significantly higher quality-of-service (QoS) albeit with fewer energy resources for diverse, already existing and also novel wireless applications. The optimal resource allocation for a system in this regard could be investigated by reducing the overall power available at the expense of reduced QoS for the inefficient users. In other words, we maxim… ▽ More Future wireless systems are expected to deliver significantly higher quality-of-service (QoS) albeit with fewer energy resources for diverse, already existing and also novel wireless applications. The optimal resource allocation for a system in this regard could be investigated by reducing the overall power available at the expense of reduced QoS for the inefficient users. In other words, we maximize the system energy efficiency by achieving power saving through a minimal back-off in terms of QoS. In this paper, we investigate the energy efficiency vs. delivered QoS trade-off for the rate-splitting multiple access (RSMA) assisted downlink system. We first determine the user grouping with a normalised channel similarity metric so as to allow a large number of users with non-zero achievable private message rates. Through the private message removal (PMR) of these users, we aim to investigate the QoS vs. energy efficiency trade-off. Numerical results indicate a peak of ~$10\%$ increase in the network energy efficiency for the proposed normalised channel similarity metric based user grouping with scheduled PMR. △ Less

Submitted 15 October, 2024; v1 submitted 8 October, 2024; originally announced October 2024.

Comments: 5 pages, 4 figures, IEEE SPAWC 2024 Conference version

On Neural-Network Representation of Wireless Self-Interference for Inband Full-Duplex Communications

Authors: Gerald Enzner, Aleksej Chinaev, Svantje Voit, Aydin Sezgin

Abstract: Neural network modeling is a key technology of science and research and a platform for deployment of algorithms to systems. In wireless communications, system modeling plays a pivotal role for interference cancellation with specifically high requirements of accuracy regarding the elimination of self-interference in full-duplex relays. This paper hence investigates the potential of identification a… ▽ More Neural network modeling is a key technology of science and research and a platform for deployment of algorithms to systems. In wireless communications, system modeling plays a pivotal role for interference cancellation with specifically high requirements of accuracy regarding the elimination of self-interference in full-duplex relays. This paper hence investigates the potential of identification and representation of the self-interference channel by neural network architectures. The approach is promising for its ability to cope with nonlinear representations, but the variability of channel characteristics is a first obstacle in straightforward application of data-driven neural networks. We therefore propose architectures with a touch of "adaptivity" to accomplish a successful training. For reproducibility of results and further investigations with possibly stronger models and enhanced performance, we document and share our data. △ Less

Submitted 1 October, 2024; originally announced October 2024.

RIS-Aided Bistatic Radar for Rapid NLOS Sensing in the Teraharetz Band

Authors: Furkan H. Ilgac, Emrah Cisija, Aya Mostafa Ahmed, Musa Furkan Keskin, Aydin Sezgin, Henk Wymeersch

Abstract: In this paper, we investigate a non-lineof-sight (NLOS) sensing problem at terahertz frequencies. To be able to observe the targets shadowed by a blockage, we propose a method using reconfigurable intelligent surfaces (RIS). We employ a bistatic radar system and scan the obstructed area with RIS using hierarchical codebooks (HCB). Moreover, we propose an iterative maximum likelihood estimation (ML… ▽ More In this paper, we investigate a non-lineof-sight (NLOS) sensing problem at terahertz frequencies. To be able to observe the targets shadowed by a blockage, we propose a method using reconfigurable intelligent surfaces (RIS). We employ a bistatic radar system and scan the obstructed area with RIS using hierarchical codebooks (HCB). Moreover, we propose an iterative maximum likelihood estimation (MLE) scheme to yield the optimum sensing accuracy, converging to Cramer-Rao lower bound (CRLB). We take band-specific effects such as diffraction and beam squint into account and show that these effects are relevant factors affecting localization performance in RIS-employed radar setups. The results show that under NLOS conditions, the system can still localize all the targets with very good accuracy using the RIS. The initial estimates obtained by the HCBs can provide centimeter-level accuracy, and when the optimal performance is needed, at the cost of a few extra transmissions, the proposed iterative MLE method improves the accuracy to sub-millimeter accuracy, yielding the position error bound. △ Less

Submitted 15 August, 2024; originally announced August 2024.

Comments: 14 pages, 14 figures, submitted to IEEE Access

Dynamic Rate Splitting Grouping for Antifragile Responses to Wireless Network Disruptions

Authors: Kevin Weinberger, Aydin Sezgin

Abstract: The reliance on wireless network architectures for applications demanding high reliability and fault tolerance is growing. These architectures heavily depend on wireless channels, making them susceptible to impairments and blockages. Ensuring functionality, particularly for safety-critical applications, demands robust countermeasures at the physical layer. In response, this work proposes the utili… ▽ More The reliance on wireless network architectures for applications demanding high reliability and fault tolerance is growing. These architectures heavily depend on wireless channels, making them susceptible to impairments and blockages. Ensuring functionality, particularly for safety-critical applications, demands robust countermeasures at the physical layer. In response, this work proposes the utilization of a dynamic Rate Splitting (RS) grouping approach as a resilience mechanism during blockages. RS effectively manages interference within networks but faces challenges during outages and blockages, where system performance can deteriorate due to the lowest decoding rate dictating the common rate and increased interference from fewer available channel links. As a strategic countermeasure, RS is leveraged to mitigate the impact of blockages, maintaining system efficiency and performance amidst disruptions. In fact, the introduction of new RS groups enables the exploration of novel solutions to the resource allocation problem, potentially outperforming those adopted before the occurrence of a blockage. As it turns out, by employing the dynamic RS grouping, the network exhibits an antifragile recovery response, showcasing the network's ability to not only recover from disruptions but also surpass its initial performance. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 6 pages, 2 figures, submitted to 19th International Symposium on Wireless Communication Systems (ISWCS 2024)

Show Me the Way: Real-Time Tracking of Wireless Mobile Users with UWB-Enabled RIS

Authors: Kevin Weinberger, Simon Tewes, Aydin Sezgin

Abstract: The integration of Reconfigurable Intelligent Surfaces (RIS) in 6G wireless networks offers unprecedented control over communication environments. However, identifying optimal configurations within practical constraints remains a significant challenge. This becomes especially pronounced, when the user is mobile and the configurations need to be deployed in real time. Leveraging Ultra-Wideband (UWB… ▽ More The integration of Reconfigurable Intelligent Surfaces (RIS) in 6G wireless networks offers unprecedented control over communication environments. However, identifying optimal configurations within practical constraints remains a significant challenge. This becomes especially pronounced, when the user is mobile and the configurations need to be deployed in real time. Leveraging Ultra-Wideband (UWB) as localization technique, we capture and analyze real-time movements of a user within the RIS-enabled indoor environment. Given this information about the system's geometry, a model-based optimization is utilized, which enables real-time beam steering of the RIS towards the user. However, practical limitations of UWB modules lead to fluctuating UWB estimates, causing the RIS beam to occasionally miss the tracked user. The methodologies proposed in this work aim to increase the compatibility between these two systems. To this end, we provide two key solutions: beam splitting for obtaining more robust RIS configurations and UWB estimation correction for reducing the variations in the UWB data. Through comprehensive theoretical and experimental evaluations in both stationary and mobile scenarios, the effectiveness of the proposed techniques is demonstrated. When combined, the proposed methods improve worst-case tracking performance by a significant 17.5dB compared to the conventional approach. △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 6 pages, 12 figures, submitted to 19th International Symposium on Wireless Communication Systems (ISWCS 2024)

Validating Properties of RIS Channel Models with Prototypical Measurements

Authors: Kevin Weinberger, Simon Tewes, Aydin Sezgin

Abstract: The integration of Reconfigurable Intelligent Surfaces (RIS) holds substantial promise for revolutionizing 6G wireless networks, offering unprecedented capabilities for real-time control over communication environments. However, determining optimal RIS configurations remains a pivotal challenge, necessitating the development of accurate analytical models. While theoretically derived models provide… ▽ More The integration of Reconfigurable Intelligent Surfaces (RIS) holds substantial promise for revolutionizing 6G wireless networks, offering unprecedented capabilities for real-time control over communication environments. However, determining optimal RIS configurations remains a pivotal challenge, necessitating the development of accurate analytical models. While theoretically derived models provide valuable insights, their potentially idealistic assumptions do not always translate well to practical measurements. This becomes especially problematic in mobile environments, where signals arrive from various directions. This study deploys an RIS prototype on a turntable, capturing the RIS channels' dependency on the angle of incoming signals. The difference between theory and practice is bridged by refining a model with angle-dependent reflection coefficients. The improved model exhibits a significantly closer alignment with real-world measurements. Analysis of the reflect coefficients reveals that non-perpendicular receiver angles can induce an additional attenuation of up to -14.5dB. Additionally, we note significant phase shift deviations, varying for each reflect element. △ Less

Submitted 13 October, 2023; originally announced February 2024.

Comments: 5 pages, 9 figured, submitted to EuCAP 2024

Enhancing the Secrecy Rate with Direction-range Focusing with FDA and RIS

Authors: Chu Li, Stefan Roth, Aydin Sezgin

Abstract: One of the great potentials to improve the confidentiality in mmWave/THz at the physical layer of technical communication, measured by the secrecy rate, lies in the use of reconfigurable intelligent surfaces (RISs). However, an important open problem arises when the eavesdropper is aligned with the legitimate user or in proximity to the RIS or legitimate user. The limitation comes, on one hand, fr… ▽ More One of the great potentials to improve the confidentiality in mmWave/THz at the physical layer of technical communication, measured by the secrecy rate, lies in the use of reconfigurable intelligent surfaces (RISs). However, an important open problem arises when the eavesdropper is aligned with the legitimate user or in proximity to the RIS or legitimate user. The limitation comes, on one hand, from the high directional gain caused by the dominant line-of-sight (LOS) path in high-frequency transmission, and, on the other hand, from the high energy leakage in the proximity of the RIS and the legitimate user. To address these issues, we employ the concept of frequency diverse arrays (FDA) at the base station (BS) associated with random inverted transmit beamforming and reflective element subset selection (RIBES). More specifically, we consider a passive eavesdropper with unknown location, and design the transmit beamforming and RIS configuration based on the channel information of the legitimate user only. In this context, the secrecy rate with the proposed transmission technique is evaluated in the case of deterministic eavesdropper channel, demonstrating that we can ensure a secure transmission regarding both direction and range. Furthermore, assuming no prior information about the eavesdropper, we describe the wiretap region and derive the worst-case secrecy rate in closed form. The latter is further optimized by determining the optimal subset sizes of the transmit antennas and reflective elements. Simulations verify the correctness of the closed-form expressions and demonstrate that we can effectively improve the secrecy rate, especially when the eavesdropper is close to the RIS or the legitimate user. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Intermittency versus Path Loss in RIS-aided THz Communication: A Data Significance Approach

Authors: Yasemin Karacora, Adam Umra, Aydin Sezgin

Abstract: The transition to Terahertz (THz) frequencies, providing an ultra-wide bandwidth, is a key driver for future wireless communication networks. However, the specific properties of the THz channel, such as severe path loss and vulnerability to blockage, pose a significant challenge in balancing data rate and reliability. This work considers reconfigurable intelligent surface (RIS)-aided THz communica… ▽ More The transition to Terahertz (THz) frequencies, providing an ultra-wide bandwidth, is a key driver for future wireless communication networks. However, the specific properties of the THz channel, such as severe path loss and vulnerability to blockage, pose a significant challenge in balancing data rate and reliability. This work considers reconfigurable intelligent surface (RIS)-aided THz communication, where the effective exploitation of a strong, but intermittent line-of-sight (LOS) path versus a reliable, yet weaker RIS-path is studied. We introduce a mixed-criticality superposition coding scheme that addresses this tradeoff from a data significance perspective. The results show that the proposed scheme enables reliable transmission for a portion of high-criticality data without significantly impacting the overall achievable sum rate and queuing delay. Additionally, we gain insights into how the LOS blockage probability and the channel gain of the RIS-link influence the rate performance of our scheme. △ Less

Submitted 24 January, 2024; originally announced January 2024.

Comments: 6 pages, 5 figures (accepted for publication at IEEE ICC 2024)

Maximizing Spectral and Energy Efficiency in Multi-user MIMO OFDM Systems with RIS and Hardware Impairment

Authors: Mohammad Soleymani, Ignacio Santamaria, Aydin Sezgin, Eduard Jorswieck

Abstract: An emerging technology to enhance the spectral efficiency (SE) and energy efficiency (EE) of wireless communication systems is reconfigurable intelligent surface (RIS), which is shown to be very powerful in single-carrier systems. However, in multi-user orthogonal frequency division multiplexing (OFDM) systems, RIS may not be as promising as in single-carrier systems since an independent optimizat… ▽ More An emerging technology to enhance the spectral efficiency (SE) and energy efficiency (EE) of wireless communication systems is reconfigurable intelligent surface (RIS), which is shown to be very powerful in single-carrier systems. However, in multi-user orthogonal frequency division multiplexing (OFDM) systems, RIS may not be as promising as in single-carrier systems since an independent optimization of RIS elements at each sub-carrier is impossible in multi-carrier systems. Thus, this paper investigates the performance of various RIS technologies like regular (reflective and passive), simultaneously transmit and reflect (STAR), and multi-sector beyond diagonal (BD) RIS in multi-user multiple-input multiple-output (MIMO) OFDM broadcast channels (BC). This requires to formulate and solve a joint MIMO precoding and RIS optimization problem. The obtained solution reveals that RIS can significantly improve the system performance even when the number of RIS elements is relatively low. Moreover, we develop resource allocation schemes for STAR-RIS and multi-sector BD-RIS in MIMO OFDM BCs, and show that these RIS technologies can outperform a regular RIS, especially when the regular RIS cannot assist the communications for all the users. △ Less

Submitted 22 January, 2024; originally announced January 2024.

Maximization of minimum rate in MIMO OFDM RIS-assisted Broadcast Channels

Authors: Mohammad Soleymani, Ignacio Santamaria, Aydin Sezgin, Eduard Jorswieck

Abstract: Reconfigurable intelligent surface (RIS) is a promising technology to enhance the spectral efficiency of wireless communication systems. By optimizing the RIS elements, the performance of the overall system can be improved. Yet, in contrast to single-carrier systems, in multi-carrier systems, it is not possible to independently optimize RIS elements at each sub-carrier, which may reduce the benefi… ▽ More Reconfigurable intelligent surface (RIS) is a promising technology to enhance the spectral efficiency of wireless communication systems. By optimizing the RIS elements, the performance of the overall system can be improved. Yet, in contrast to single-carrier systems, in multi-carrier systems, it is not possible to independently optimize RIS elements at each sub-carrier, which may reduce the benefits of RIS in multi-user orthogonal frequency division multiplexing (OFDM) systems. To this end, we investigate the effectiveness of RIS in multiple-input, multiple-output (MIMO) OFDM broadcast channels (BC). We formulate and solve a joint precoding and RIS optimization problem. We show that RIS can significantly improve the system performance even when the number of RIS elements per sub-band is very low. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: Accepted at IEEE CAMSAP 2023

Extended Reality via Cooperative NOMA in Hybrid Cloud/Mobile-Edge Computing Networks

Authors: Robert-Jeron Reifert, Hayssam Dahrouj, Aydin Sezgin

Abstract: Extended reality (XR) applications often perform resource-intensive tasks, which are computed remotely, a process that prioritizes the latency criticality aspect. To this end, this paper shows that through leveraging the power of the central cloud (CC), the close proximity of edge computers (ECs), and the flexibility of uncrewed aerial vehicles (UAVs), a UAV-aided hybrid cloud/mobile-edge computin… ▽ More Extended reality (XR) applications often perform resource-intensive tasks, which are computed remotely, a process that prioritizes the latency criticality aspect. To this end, this paper shows that through leveraging the power of the central cloud (CC), the close proximity of edge computers (ECs), and the flexibility of uncrewed aerial vehicles (UAVs), a UAV-aided hybrid cloud/mobile-edge computing architecture promises to handle the intricate requirements of future XR applications. In this context, this paper distinguishes between two types of XR devices, namely, strong and weak devices. The paper then introduces a cooperative non-orthogonal multiple access (Co-NOMA) scheme, pairing strong and weak devices, so as to aid the XR devices quality-of-user experience by intelligently selecting either the direct or the relay links toward the weak XR devices. A sum logarithmic-rate maximization problem is, thus, formulated so as to jointly determine the computation and communication resources, and link-selection strategy as a means to strike a trade-off between the system throughput and fairness. Subject to realistic network constraints, e.g., power consumption and delay, the optimization problem is then solved iteratively via discrete relaxations, successive-convex approximation, and fractional programming, an approach which can be implemented in a distributed fashion across the network. Simulation results validate the proposed algorithms performance in terms of log-rate maximization, delay-sensitivity, scalability, and runtime performance. The practical distributed Co-NOMA implementation is particularly shown to offer appreciable benefits over traditional multiple access and NOMA methods, highlighting its applicability in decentralized XR systems. △ Less

Submitted 6 December, 2023; v1 submitted 9 October, 2023; originally announced October 2023.

Comments: 18 pages, 15 figures, 3 tables. This paper is accepted for publication at the IEEE Internet of Things Journal

Journal ref: IEEE Internet of Things Journal, 2023

Open Source Reconfigurable Intelligent Surface for the Frequency Range of 5 GHz WiFi

Authors: Markus Heinrichs, Aydin Sezgin, Rainer Kronberger

Abstract: Reconfigurable Intelligent Surfaces (RIS) have been identified as a potential ingredient to enhance the performance of contemporary wireless communication and sensing systems. Yet, most of the existing devices are either costly or not available for reproduction. To close this gap, a Reconfigurable Intelligent Surface for the frequency range of 5 GHz WiFi is presented in this work. We describe the… ▽ More Reconfigurable Intelligent Surfaces (RIS) have been identified as a potential ingredient to enhance the performance of contemporary wireless communication and sensing systems. Yet, most of the existing devices are either costly or not available for reproduction. To close this gap, a Reconfigurable Intelligent Surface for the frequency range of 5 GHz WiFi is presented in this work. We describe the designed unit cell, which is optimized for the full frequency range of 5.15 to 5.875 GHz. Standard FR4 substrate is used for cost optimization. The measured reflection coefficient of a rectangular RIS prototype with 256 elements is used for RF performance evaluation. Fabrication data and firmware source code are made open source, which makes RIS more available in real measurement setups. △ Less

Submitted 11 September, 2023; v1 submitted 29 June, 2023; originally announced July 2023.

Resilient Sparse Array Radar with the Aid of Deep Learning

Authors: Aya Mostafa Ahmed, Udaya S. K. P. Miriya Thanthrige, Aydin Sezgin, Fulvio Gini

Abstract: In this paper, we address the problem of direction of arrival (DOA) estimation for multiple targets in the presence of sensor failures in a sparse array. Generally, sparse arrays are known with very high-resolution capabilities, where N physical sensors can resolve up to $\mathcal{O}(N^2)$ uncorrelated sources. However, among the many configurations introduced in the literature, the arrays that pr… ▽ More In this paper, we address the problem of direction of arrival (DOA) estimation for multiple targets in the presence of sensor failures in a sparse array. Generally, sparse arrays are known with very high-resolution capabilities, where N physical sensors can resolve up to $\mathcal{O}(N^2)$ uncorrelated sources. However, among the many configurations introduced in the literature, the arrays that provide the largest hole-free co-array are the most susceptible to sensor failures. We propose here two machine learning (ML) methods to mitigate the effect of sensor failures and maintain the DOA estimation performance and resolution. The first method enhances the conventional spatial smoothing using deep neural network (DNN), while the second one is an end-to-end data-driven method. Numerical results show that both approaches can significantly improve the performance of MRA with two failed sensors. The data-driven method can maintain the performance of the array with no failures at high signal-tonoise ratio (SNR). Moreover, both approaches can even perform better than the original array at low SNR thanks to the denoising effect of the proposed DNN △ Less

Submitted 21 June, 2023; originally announced June 2023.

Comments: Accepted to be published in 2023 IEEE 97th Vehicular Technology Conference: VTC2023-Spring, 2023

Journal ref: 2023 IEEE 97th Vehicular Technology Conference (VTC2023-Spring)

Integrated Communication and Control Systems: A Data Significance Perspective

Authors: Stefan Roth, Yasemin Karacora, Christina Chaccour, Aydin Sezgin, Walid Saad

Abstract: The interconnected smart devices and industrial internet of things devices require low-latency communication to fulfill control objectives despite limited resources. In essence, such devices have a time-critical nature but also require a highly accurate data input based on its significance. In this paper, we investigate various coordinated and distributed semantic scheduling schemes with a data si… ▽ More The interconnected smart devices and industrial internet of things devices require low-latency communication to fulfill control objectives despite limited resources. In essence, such devices have a time-critical nature but also require a highly accurate data input based on its significance. In this paper, we investigate various coordinated and distributed semantic scheduling schemes with a data significance perspective. In particular, novel algorithms are proposed to analyze the benefit of such schemes for the significance in terms of estimation accuracy. Then, we derive the bounds of the achievable estimation accuracy. Our numerical results showcase the superiority of semantic scheduling policies that adopt an integrated control and communication strategy. In essence, such policies can reduce the weighted sum of mean squared errors compared to traditional policies. △ Less

Submitted 3 February, 2023; originally announced February 2023.

The Perfect Match: RIS-enabled MIMO Channel Estimation Using Tensor Decomposition

Authors: Bilal Ahmad, Kevin Weinberger, Aydin Sezgin, Bilal Zafar, Martin Haardt

Abstract: The deployment of reconfigurable intelligent surfaces (RISs) in a communication system provides control over the propagation environment, which facilitates the augmentation of a multitude of communication objectives. As these performance gains are highly dependent on the applied phase shifts at the RIS, accurate channel state information at the transceivers is imperative. However, not only do RISs… ▽ More The deployment of reconfigurable intelligent surfaces (RISs) in a communication system provides control over the propagation environment, which facilitates the augmentation of a multitude of communication objectives. As these performance gains are highly dependent on the applied phase shifts at the RIS, accurate channel state information at the transceivers is imperative. However, not only do RISs traditionally lack signal processing capabilities, but their end-to-end channels also consist of multiple components. Hence, conventional channel estimation (CE) algorithms become incompatible with RIS-aided communication systems as they fail to provide the necessary information about the channel components, which are essential for a beneficial RIS configuration. To enable the full potential of RISs, we propose to use tensor-decomposition-based CE, which facilitates smart configuration of the RIS by providing the required channel components. We use canonical polyadic (CP) decomposition, that exploits a structured time domain pilot sequence. Compared to other state-of-the-art decomposition methods, the proposed Semi-Algebraic CP decomposition via Simultaneous Matrix Diagonalization (SECSI) algorithm is more time efficient as it does not require an iterative process. The benefits of SECSI for RIS-aided networks are validated with numerical results, which show the improved individual and end-to-end CE accuracy of SECSI. △ Less

Submitted 2 May, 2023; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: After updating the parameters in new simulations, the proposed method was showing the same performance as the existing methods

IRS-Assistance with Outdated CSI: Element subset selection for secrecy performance enhancement

Authors: Chu Li, Aydin Sezgin

Abstract: In this work, we investigate the secrecy performance in an intelligent reflecting surface (IRS)-assisted downlink system. In particular, we consider a base station (BS)-side IRS and as such, the BS-IRS channel is assumed to be known perfectly. Of more importance, we consider the case, in which only outdated channel state information (CSI) of the IRS-user channel is available. We study the impact o… ▽ More In this work, we investigate the secrecy performance in an intelligent reflecting surface (IRS)-assisted downlink system. In particular, we consider a base station (BS)-side IRS and as such, the BS-IRS channel is assumed to be known perfectly. Of more importance, we consider the case, in which only outdated channel state information (CSI) of the IRS-user channel is available. We study the impact of outdated CSI on the secrecy performance numerically and analytically. Furthermore, we propose an element subset selection (ESS) method in order to improve the secrecy performance. A key observation is that minimal secrecy outage probability (SOP) can be achieved using a subset of the IRS, and the optimal number of selected reflecting elements can be effectively found by closed-form expressions. △ Less

Submitted 16 November, 2022; originally announced November 2022.

Optimizing the Age of Information in Mixed-Critical Wireless Communication Networks

Authors: Robert-Jeron Reifert, Stefan Roth, Aydin Sezgin

Abstract: Beyond fifth generation wireless communication networks (B5G) are applied in many use-cases, such as industrial control systems, smart public transport, and power grids. Those applications require innovative techniques for timely transmission and increased wireless network capacities. Hence, this paper proposes optimizing the data freshness measured by the age of information (AoI) in dense interne… ▽ More Beyond fifth generation wireless communication networks (B5G) are applied in many use-cases, such as industrial control systems, smart public transport, and power grids. Those applications require innovative techniques for timely transmission and increased wireless network capacities. Hence, this paper proposes optimizing the data freshness measured by the age of information (AoI) in dense internet of things (IoT) sensor-actuator networks. Given different priorities of data-streams, i.e., different sensitivities to outdated information, mixed-criticality is introduced by analyzing different functions of the age, i.e., we consider linear and exponential aging functions. An intricate non-convex optimization problem managing the physical transmission time and packet outage probability is derived. Such problem is tackled using stochastic reformulations, successive convex approximations, and fractional programming, resulting in an efficient iterative algorithm for AoI optimization. Simulation results validate the proposed scheme's performance in terms of AoI, mixed-criticality, and scalability. The proposed non-orthogonal transmission is shown to outperform an orthogonal access scheme in various deployment cases. Results emphasize the potential gains for dense B5G empowered IoT networks in minimizing the AoI. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 6 pages, 5 figures. This work has been submitted to the IEEE for possible publication

Journal ref: ICC 2023 - IEEE International Conference on Communications

RIS-enhanced Resilience in Cell-Free MIMO

Authors: Kevin Weinberger, Robert-Jeron Reifert, Aydin Sezgin, Ertugrul Basar

Abstract: More and more applications that require high reliability and fault tolerance are realized with wireless network architectures and thus ultimately rely on the wireless channels, which can be subject to impairments and blockages. Hence, these architectures require a backup plan in the physical layer in order to guarantee functionality, especially when safety-relevant aspects are involved. To this en… ▽ More More and more applications that require high reliability and fault tolerance are realized with wireless network architectures and thus ultimately rely on the wireless channels, which can be subject to impairments and blockages. Hence, these architectures require a backup plan in the physical layer in order to guarantee functionality, especially when safety-relevant aspects are involved. To this end, this work proposes to utilize the reconfigurable intelligent surface (RIS) as a resilience mechanism to counteract outages. The advantages of RISs for such a purpose derive from their inherent addition of alternative channel links in combination with their reconfigurability. The major benefits are investigated in a cell-free multiple-input and multiple-output (MIMO) setting, in which the direct channel paths are subject to blockages. An optimization problem is formulated that includes rate allocation with beamforming and phase shift configuration and is solved with a resilience-aware alternating optimization approach. Numerical results show that deploying even a randomly-configured RIS to a network reduces the performance degradation caused by blockages. This becomes even more pronounced in the optimized case, in which the RIS is able to potentially counteract the performance degradation entirely. Interestingly, adding more reflecting elements to the system brings an overall benefit for the resilience, even for time-sensitive systems, due to the contribution of the RIS reflections, even when unoptimized. △ Less

Submitted 31 October, 2022; originally announced November 2022.

Comments: 6 pages, 6 figures, submitted to International ITG 26th Workshop on Smart Antennas and 13th Conference on Systems, Communications, and Coding (WSA&SCC2023)

Approximation-based Threshold Optimization from Single Antenna to Massive SIMO Authentication

Authors: Stefan Roth, Aydin Sezgin, Roman Bessel, H. Vincent Poor

Abstract: In a wireless sensor network, data from various sensors are gathered to estimate the system-state of the process system. However, adversaries aim at distorting the system-state estimate, for which they may infiltrate sensors or position additional devices in the environment. To authenticate the received process values, the integrity of the measurements from different sensors can be evaluated joint… ▽ More In a wireless sensor network, data from various sensors are gathered to estimate the system-state of the process system. However, adversaries aim at distorting the system-state estimate, for which they may infiltrate sensors or position additional devices in the environment. To authenticate the received process values, the integrity of the measurements from different sensors can be evaluated jointly with the temporal integrity of channel measurements from each sensor. For this purpose, we design a security protocol, in which Kalman filters are used to predict the system-state and the channel-state values, and the received data are authenticated by a hypothesis test. We theoretically analyze the adversarial success probability and the reliability rate obtained in the hypothesis test in two ways, based on a chi-square approximation and on a Gaussian approximation. The two approximations are exact for small and large data vectors, respectively. The Gaussian approximation is suitable for analyzing massive single-input multiple-output (SIMO) setups. To obtain additional insights, the approximation is further adapted for the case of channel hardening, which occurs in massive SIMO fading channels. As adversaries always look for the weakest point of a system, a time-constant security level is required. To provide such a service, the approximations are used to propose time-varying threshold values for the hypothesis test, which approximately attain a constant security level. Numerical results show that a constant security level can only be achieved by a time-varying threshold choice, while a constant threshold value leads to a time-varying security level. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Contact-less Material Probing with Distributed Sensors: Joint Sensing and Communication Optimization

Authors: Ali Kariminezhad, Soheil Gherekhloo, Aydin Sezgin

Abstract: The utilization of RF signals to probe material properties of objects is of huge interest both in academia as well as industry. To this end, a setup is investigated, in which a transmitter equipped with a two-dimensional multi-antenna array dispatches a signal, which hits objects in the environment and the reflections from the objects are captured by distributed sensors. The received signal at tho… ▽ More The utilization of RF signals to probe material properties of objects is of huge interest both in academia as well as industry. To this end, a setup is investigated, in which a transmitter equipped with a two-dimensional multi-antenna array dispatches a signal, which hits objects in the environment and the reflections from the objects are captured by distributed sensors. The received signal at those sensors are then amplified and forwarded to a multiple antenna fusion center, which performs space-time post-processing in order to optimize the information extraction. In this process, optimal design of power allocation per object alongside sensors amplifications is of crucial importance. Here, the power allocation and sensors amplifications is jointly optimized, given maximum-ratio combining (MRC) at the fusion center. We formulate this challenge as a sum-power minimization under per-object SINR constraints, a sum-power constraint at the transmitter and individual power constraints at the sensors. Moreover, the advantage of deploying zero-forcing (ZF) and minimum mean-squared error (MMSE) at the fusion center is discussed. Asymptotic analysis is also provided for the case that large number of sensors are deployed in the sensing environment. △ Less

Submitted 17 May, 2022; originally announced May 2022.

Comments: arXiv admin note: text overlap with arXiv:1902.11117

Sacrificing CSI for a Greater Good: RIS-enabled Opportunistic Rate Splitting

Authors: Kevin Weinberger, Aydin Sezgin

Abstract: In reconfigurable intelligent surface (RIS)-assisted systems, the optimization of the phase shifts requires separate acquisition of the channel state information (CSI) for the direct and RIS-assisted channels, posing significant design challenges. In this paper, a novel scheme is proposed, which considers practical limitations like pilot overhead and channel estimation (CE) errors to increase the… ▽ More In reconfigurable intelligent surface (RIS)-assisted systems, the optimization of the phase shifts requires separate acquisition of the channel state information (CSI) for the direct and RIS-assisted channels, posing significant design challenges. In this paper, a novel scheme is proposed, which considers practical limitations like pilot overhead and channel estimation (CE) errors to increase the net performance. More specifically, at the cost of unpredictable interference, a portion of the CSI for the RIS-assisted channels is sacrificed in order to reduce the CE time. By alternating the CSI between coherence blocks and employing rate splitting, it becomes possible to mitigate the interference, thereby compensating the adverse effect of the sacrificed CSI. Numerical simulations validate that the proposed scheme exhibits better performance in terms of achievable net rate, resulting in gains of up to 160% compared non-orthogonal multiple access (NOMA), when CE time and CE errors are considered. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: 5 pages, 2 figures, submitted to IEEE SAM2022 Special Session on Reconfigurable Intelligent Surfaces for signal processing and communications

IRS-enabled Breath Tracking with Colocated Commodity WiFi Transceivers

Authors: Simon Tewes, Markus Heinrichs, Rainer Kronberger, Aydin Sezgin

Abstract: Intelligent reflecting surfaces (IRS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an IRS prototype system, this paper aims to enhance self-interference (SI) cancellation for breath tracking with commodity WiFi devices. SI suppression is a crucial requirement for breath tracking with a single antenna site as the SI severely limits the radio sensing ran… ▽ More Intelligent reflecting surfaces (IRS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an IRS prototype system, this paper aims to enhance self-interference (SI) cancellation for breath tracking with commodity WiFi devices. SI suppression is a crucial requirement for breath tracking with a single antenna site as the SI severely limits the radio sensing range by shadowing the received signal with its own transmit signal. To this end, we propose to assist SI cancellation by exploiting an IRS to form a suitable cancellation signal in the analog domain. Building upon a 256-element IRS prototype, we present results of breath tracking with IRS-assisted SI cancellation from a practical testbed. We use inexpensive WiFi hardware to extract the Channel State Information (CSI) in the 5~GHz band and analyze the phase change between a colocated transmitter and receiver with added local oscillator (LO) synchronization. We are able to track the breath of a test person regardless of the position in an indoor environment in a room-level range. The presented case study shows promising performance in both capturing the breath frequency as well as the breathing patterns. △ Less

Submitted 10 March, 2022; originally announced March 2022.

Comments: Submitted to IEEE Internet of Things Journal

Journal ref: IEEE Internet of Things Journal ( Early Access ) 2022

Event-Based Beam Tracking with Dynamic Beamwidth Adaptation in Terahertz (THz) Communications

Authors: Yasemin Karacora, Christina Chaccour, Aydin Sezgin, Walid Saad

Abstract: Terahertz (THz) communication will be a key enabler for next-generation wireless systems. While THz frequency bands provide abundant bandwidth and extremely high data rates, their effective operation is inhibited by short communication ranges and narrow beams, thus, leading to major challenges pertaining to user mobility, beam alignment, and handover. In particular, there is a strong need for nove… ▽ More Terahertz (THz) communication will be a key enabler for next-generation wireless systems. While THz frequency bands provide abundant bandwidth and extremely high data rates, their effective operation is inhibited by short communication ranges and narrow beams, thus, leading to major challenges pertaining to user mobility, beam alignment, and handover. In particular, there is a strong need for novel beam tracking methods that consider the tradeoff between enhancing the received signal strength via increasing beam directivity, and increasing the coverage probability by widening the beam. In this paper, a multi-objective optimization problem is formulated with the goal of jointly maximizing the expected rate and minimizing the outage probability subject to transmit power and overhead constraints. Subsequently, a novel parameterized beamformer with dynamic beamwidth adaptation is proposed. In addition to the precoder, an event-based beam tracking approach is introduced that efficiently prevents outages caused by beam misalignment and dynamic blockage while maintaining a low pilot overhead. Simulation results show that the proposed beamforming scheme improves average rate performance and reduces the amount of outages caused by the brittle THz misalignment process and the particularly severe path loss in the THz band. Moreover, the proposed event-triggered THz channel estimation approach enables connectivity with minimal overhead and reliable communication at THz bands. △ Less

Submitted 21 August, 2022; v1 submitted 17 January, 2022; originally announced January 2022.

Comments: 30 pages, 10 figures. This work has been submitted to the IEEE for possible publication

On the Impact of Oscillator Phase Noise in an IRS-assisted MISO TDD System

Authors: Chu Li, Aydin Sezgin, Zhu Han

Abstract: In this work, we study the impact of the multiplicative phase noise in an IRS-assisted system. We consider an IRS-assisted system with multiplicative phase noise both at the BS and user. A novel channel estimation algorithm is proposed considering the phase noise. By utilizing the proposed channel estimates we investigate the system performance in the downlink, more specifically, we derive the erg… ▽ More In this work, we study the impact of the multiplicative phase noise in an IRS-assisted system. We consider an IRS-assisted system with multiplicative phase noise both at the BS and user. A novel channel estimation algorithm is proposed considering the phase noise. By utilizing the proposed channel estimates we investigate the system performance in the downlink, more specifically, we derive the ergodic capacity in closed form. Simulation results verify the correctness of the closed-form expression. We observe that the system becomes more robust against the phase noise as the number of reflective elements increases. Moreover, the influence of the additive channel noise in uplink vanishes as the number of reflecting elements grows asymptotically large. △ Less

Submitted 10 October, 2021; v1 submitted 6 July, 2021; originally announced July 2021.

Deep Unfolding of Iteratively Reweighted ADMM for Wireless RF Sensing

Authors: Udaya S. K. P. Miriya Thanthrige, Peter Jung, Aydin Sezgin

Abstract: We address the detection of material defects, which are inside a layered material structure using compressive sensing based multiple-input and multiple-output (MIMO) wireless radar. Here, the strong clutter due to the reflection of the layered structure's surface often makes the detection of the defects challenging. Thus, sophisticated signal separation methods are required for improved defect det… ▽ More We address the detection of material defects, which are inside a layered material structure using compressive sensing based multiple-input and multiple-output (MIMO) wireless radar. Here, the strong clutter due to the reflection of the layered structure's surface often makes the detection of the defects challenging. Thus, sophisticated signal separation methods are required for improved defect detection. In many scenarios, the number of defects that we are interested in is limited and the signaling response of the layered structure can be modeled as a low-rank structure. Therefore, we propose joint rank and sparsity minimization for defect detection. In particular, we propose a non-convex approach based on the iteratively reweighted nuclear and $\ell_1-$norm (a double-reweighted approach) to obtain a higher accuracy compared to the conventional nuclear norm and $\ell_1-$norm minimization. To this end, an iterative algorithm is designed to estimate the low-rank and sparse contributions. Further, we propose deep learning to learn the parameters of the algorithm (i.e., algorithm unfolding) to improve the accuracy and the speed of convergence of the algorithm. Our numerical results show that the proposed approach outperforms the conventional approaches in terms of mean square errors of the recovered low-rank and sparse components and the speed of convergence. △ Less

Submitted 17 December, 2021; v1 submitted 7 June, 2021; originally announced June 2021.

Journal ref: Sensors 2022,

Full-Duplex meets Reconfigurable Surfaces: RIS-assisted SIC for Full-Duplex Radios

Authors: Simon Tewes, Markus Heinrichs, Paul Staat, Rainer Kronberger, Aydin Sezgin

Abstract: Reconfigurable intelligent surfaces (RIS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an RIS prototype system, this paper aims to enhance self-interference (SI) cancellation for in-band full-duplex (FD) communication systems. SI suppression is a crucial requirement for FD communication as the SI severely limits the performance of a node by shadowing t… ▽ More Reconfigurable intelligent surfaces (RIS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an RIS prototype system, this paper aims to enhance self-interference (SI) cancellation for in-band full-duplex (FD) communication systems. SI suppression is a crucial requirement for FD communication as the SI severely limits the performance of a node by shadowing the received signal from a distant node with its own transmit signal. To this end, we propose to assist SI cancellation by exploiting an RIS to form a suitable cancellation signal in the analog domain. Building upon a 256-element RIS prototype, we present results of RIS-assisted SI cancellation from a practical testbed. Given an initial analog isolation of 44 dB provided by the antenna design, we are able to cancel the leaked signal by an additional 59 dB in the narrowband case, resulting in an overall SI suppression of 103 dB without additional digital cancellation. The presented case study shows promising performance to build an FD communication system on this foundation. △ Less

Submitted 4 March, 2022; v1 submitted 26 May, 2021; originally announced May 2021.

Comments: 6 pages, 9 figures, Accepted for publication in IEEE International Conference on Communications (ICC) 2022

Journal ref: IEEE International Conference on Communications (ICC) 2022

Synergistic Benefits in IRS- and RS-enabled C-RAN with Energy-Efficient Clustering

Authors: Kevin Weinberger, Alaa Alameer Ahmad, Aydin Sezgin, Alessio Zappone

Abstract: The potential of intelligent reflecting surfaces (IRSs) is investigated as a promising technique for enhancing the energy efficiency of wireless networks. Specifically, the IRS enables passive beamsteering by employing many low-cost individually controllable reflect elements. The resulting change of the channel state, however, increases both, signal quality and interference at the users. To counte… ▽ More The potential of intelligent reflecting surfaces (IRSs) is investigated as a promising technique for enhancing the energy efficiency of wireless networks. Specifically, the IRS enables passive beamsteering by employing many low-cost individually controllable reflect elements. The resulting change of the channel state, however, increases both, signal quality and interference at the users. To counteract this negative side effect, we employ rate splitting (RS), which inherently is able to mitigate the impact of interference. We facilitate practical implementation by considering a Cloud Radio Access Network (C-RAN) at the cost of finite fronthaul-link capacities, which necessitate the allocation of sensible user-centric clusters to ensure energy-efficient transmissions. Dynamic methods for RS and the user clustering are proposed to account for the interdependencies of the individual techniques. Numerical results show that the dynamic RS method establishes synergistic benefits between RS and the IRS. Additionally, the dynamic user clustering and the IRS cooperate synergistically, with a gain of up to 88% when compared to the static scheme. Interestingly, with an increasing fronthaul capacity, the gain of the dynamic user clustering decreases, while the gain of the dynamic RS method increases. Around the resulting intersection, both methods affect the system concurrently, improving the energy efficiency drastically. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 30 pages, 5 figures, journal TWC

Kalman filter based MIMO CSI phase recovery for COTS WiFi devices

Authors: Chu Li, Jeremy Brauer, Aydin Sezgin, Christian Zenger

Abstract: Recently channel state information (CSI) measurements from commercial multi input multi output (MIMO) WiFi systems have been ubiquitously used for different wireless sensing applications. However, the phase of the CSI realizations is usually distorted severely by phase errors due to the hardware impairments, which significantly reduce the sensing performance. In this paper, we directly utilize the… ▽ More Recently channel state information (CSI) measurements from commercial multi input multi output (MIMO) WiFi systems have been ubiquitously used for different wireless sensing applications. However, the phase of the CSI realizations is usually distorted severely by phase errors due to the hardware impairments, which significantly reduce the sensing performance. In this paper, we directly utilize the modeling of the phase distortions caused by the hardware impairments and propose an adaptive CSI estimation approach based on Kalman filter (KF) with maximum a posteriori (MAP) estimation that considers the CSI from the previous time. The performance of the proposed algorithm is compared against the Cramer Rao lower bound (CRLB). Simulation and experimental results demonstrate that our approach can track the channel variations while eliminating the phase errors accurately. △ Less

Submitted 3 May, 2021; v1 submitted 15 January, 2021; originally announced January 2021.

Spoofing attack detection in dynamic channels with imperfect CSI

Authors: Chu Li, Aydin Sezgin

Abstract: Recently, channel state information (CSI) at the physical-layer has been utilized to detect spoofing attacks in wireless communications. However, due to hardware impairments and communication noise, the CSI cannot be estimated accurately, which significantly degrades the attack detection performance. Besides, the reliability of CSI based detection schemes is challenged by time-varying scenarios. T… ▽ More Recently, channel state information (CSI) at the physical-layer has been utilized to detect spoofing attacks in wireless communications. However, due to hardware impairments and communication noise, the CSI cannot be estimated accurately, which significantly degrades the attack detection performance. Besides, the reliability of CSI based detection schemes is challenged by time-varying scenarios. To address these issues, we propose an adaptive Kalman based detection scheme. By utilizing the knowledge of the predicted channel we eliminate the channel estimation error, especially the random phase error which occurs due to the lack of synchronization between transmitter and receiver. Furthermore, we define a Kalman residual based test statistic for attack detection. Simulation results show that our proposed scheme makes the detection more robust at low signal-to-noise ratio (SNR) and in dynamic scenarios. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Localization Attack by Precoder Feedback Overhearing in 5G Networks and Countermeasures

Authors: Stefan Roth, Stefano Tomasin, Marco Maso, Aydin Sezgin

Abstract: In fifth-generation (5G) cellular networks, users feed back to the base station the index of the precoder (from a codebook) to be used for downlink transmission. The precoder is strongly related to the user channel and in turn to the user position within the cell. We propose a method by which an external attacker determines the user position by passively overhearing this unencrypted layer-2 feedba… ▽ More In fifth-generation (5G) cellular networks, users feed back to the base station the index of the precoder (from a codebook) to be used for downlink transmission. The precoder is strongly related to the user channel and in turn to the user position within the cell. We propose a method by which an external attacker determines the user position by passively overhearing this unencrypted layer-2 feedback signal. The attacker first builds a map of fed back precoder indices in the cell. Then, by overhearing the precoder index fed back by the victim user, the attacker finds its position on the map. We focus on the type-I single-panel codebook, which today is the only mandatory solution in the 3GPP standard. We analyze the attack and assess the obtained localization accuracy against various parameters. We analyze the localization error of a simplified precoder feedback model and describe its asymptotic localization precision. We also propose a mitigation against our attack, wherein the user randomly selects the precoder among those providing the highest rate. Simulations confirm that the attack can achieve a high localization accuracy, which is significantly reduced when the mitigation solution is adopted, at the cost of a negligible rate degradation. △ Less

Submitted 14 December, 2020; originally announced December 2020.

On Synergistic Benefits of Rate Splitting in IRS-assisted Cloud Radio Access Networks

Authors: Kevin Weinberger, Alaa Alameer Ahmad, Aydin Sezgin

Abstract: The concept of intelligent reflecting surfaces (IRSs) is considered as a promising technology for increasing the efficiency of mobile wireless networks. This is achieved by employing a vast amount of low-cost individually adjustable passive reflect elements, that are able to apply changes to the reflected signal. To this end, the IRS makes the environment realtime controllable and can be adjusted… ▽ More The concept of intelligent reflecting surfaces (IRSs) is considered as a promising technology for increasing the efficiency of mobile wireless networks. This is achieved by employing a vast amount of low-cost individually adjustable passive reflect elements, that are able to apply changes to the reflected signal. To this end, the IRS makes the environment realtime controllable and can be adjusted to significantly increase the received signal quality at the users by passive beamsteering. However, the changes to the reflected signals have an effect on all users near the IRS, which makes it impossible to optimize the changes to positively influence every transmission, affected by the reflections. This results in some users not only experiencing better signal quality, but also an increase in received interference. To mitigate this negative side effect of the IRS, this paper utilizes the rate splitting (RS) technique, which enables the mitigation of interference within the network in such a way that it also mitigates the increased interference caused by the IRS. To investigate the effects on the overall power savings, that can be achieved by combining both techniques, we minimize the required transmit power, needed to satisfy per-user quality-of-service (QoS) constraints. Numerical results show the improved power savings, that can be gained by utilizing the IRS and the RS technique simultaneously. In fact, the concurrent use of both techniques yields power savings, which are beyond the cumulative power savings of using each technique separately. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: 6 pages, 2 figures, conference, submitted to ICC 2021

Defect Detection by MIMO Wireless Sensing based on Weighted Low-Rank plus Sparse Recovery

Authors: Udaya S. K. P. Miriya Thanthrige, Ali Kariminezhad, Peter Jung, Aydin Sezgin

Abstract: We present a compressive sensing based defect detection by multiple input multiple output (MIMO) wireless radar. Here, defects are inside a layered material structure, therefore, due to reflections from the surface of the layered material structure the defect detection is challenging. By utilizing a low-rank nature of the reflections of the layered material structure and sparse nature of the defec… ▽ More We present a compressive sensing based defect detection by multiple input multiple output (MIMO) wireless radar. Here, defects are inside a layered material structure, therefore, due to reflections from the surface of the layered material structure the defect detection is challenging. By utilizing a low-rank nature of the reflections of the layered material structure and sparse nature of the defects, we propose a method based on rank minimization and sparse recovery. To improve the accuracy in the recovery of low-rank and sparse components, we propose a non-convex approach based on the iteratively reweighted nuclear norm and iteratively reweighted $\ell_1-$norm algorithm. Our numerical results show that the proposed method is able to demix and recover the signalling responses of the defects and layered structure successfully from substantially reduced number of observations. Further, the proposed approach outperforms the state-of-the-art clutter reduction approaches △ Less

Submitted 19 February, 2022; v1 submitted 31 October, 2020; originally announced November 2020.

Comments: Submitted to IEEE EUSIPCO 2022

Deep Learning for DOA Estimation in MIMO Radar Systems via Emulation of Large Antenna Arrays

Authors: Aya Mostafa Ahmed, Udaya Sampath K. P. Miriya Thanthrige, Aly El Gamal, Aydin Sezgin

Abstract: We present a MUSIC-based Direction of Arrival (DOA) estimation strategy using small antenna arrays, via employing deep learning for reconstructing the signals of a virtual large antenna array. Not only does the proposed strategy deliver significantly better performance than simply plugging the incoming signals into MUSIC, but surprisingly, the performance is also better than directly using an actu… ▽ More We present a MUSIC-based Direction of Arrival (DOA) estimation strategy using small antenna arrays, via employing deep learning for reconstructing the signals of a virtual large antenna array. Not only does the proposed strategy deliver significantly better performance than simply plugging the incoming signals into MUSIC, but surprisingly, the performance is also better than directly using an actual large antenna array with MUSIC for high angle ranges and low test SNR values. We further analyze the best choice for the training SNR as a function of the test SNR, and observe dramatic changes in the behavior of this function for different angle ranges. △ Less

Submitted 5 March, 2021; v1 submitted 27 July, 2020; originally announced July 2020.

Comments: 5 Pages, Submitted to IEEE Communications Letters

Journal ref: IEEE Communications Letters 2021

Learning Multiplicative Interactions with Bayesian Neural Networks for Visual-Inertial Odometry

Authors: Kashmira Shinde, Jongseok Lee, Matthias Humt, Aydin Sezgin, Rudolph Triebel

Abstract: This paper presents an end-to-end multi-modal learning approach for monocular Visual-Inertial Odometry (VIO), which is specifically designed to exploit sensor complementarity in the light of sensor degradation scenarios. The proposed network makes use of a multi-head self-attention mechanism that learns multiplicative interactions between multiple streams of information. Another design feature of… ▽ More This paper presents an end-to-end multi-modal learning approach for monocular Visual-Inertial Odometry (VIO), which is specifically designed to exploit sensor complementarity in the light of sensor degradation scenarios. The proposed network makes use of a multi-head self-attention mechanism that learns multiplicative interactions between multiple streams of information. Another design feature of our approach is the incorporation of the model uncertainty using scalable Laplace Approximation. We evaluate the performance of the proposed approach by comparing it against the end-to-end state-of-the-art methods on the KITTI dataset and show that it achieves superior performance. Importantly, our work thereby provides an empirical evidence that learning multiplicative interactions can result in a powerful inductive bias for increased robustness to sensor failures. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: Published at Workshop on AI for Autonomous Driving (AIAD), the 37th International Conference on Machine Learning, Vienna, Austria, 2020

Characterization of Dielectric Materials by Sparse Signal Processing with Iterative Dictionary Updates

Authors: Udaya S. K. P. Miriya Thanthrige, Jan Barowski, Ilona Rolfes, Daniel Erni, Thomas Kaiser, Aydin Sezgin

Abstract: Estimating parameters and properties of various materials without causing damage to the material under test (MUT) is important in many applications. Thus, in this letter, we address this by wireless sensing. Here, the accuracy of the estimation depends on the accurate estimation of the properties of the reflected signal from the MUT (e.g., number of reflections, their amplitudes and time delays).… ▽ More Estimating parameters and properties of various materials without causing damage to the material under test (MUT) is important in many applications. Thus, in this letter, we address this by wireless sensing. Here, the accuracy of the estimation depends on the accurate estimation of the properties of the reflected signal from the MUT (e.g., number of reflections, their amplitudes and time delays). For a layered MUT, there are multiple reflections and, due to the limited bandwidth at the receiver, these reflections superimpose each other. Since the number of reflections coming from the MUT is limited, we propose sparse signal processing (SSP) to decompose the reflected signal. In SSP, a so called dictionary is required to obtain a sparse representation of the signal. Here, instead of a fixed dictionary, a dictionary update technique is proposed to improve the estimation of the reflected signal. To validate the proposed method, a vector network analyzer (VNA) based measurement setup is used. It turns out that the estimated dielectric constants are in close agreement with the dielectric constants of the MUTs reported in literature. Further, the proposed approach outperforms the state-of-the-art model-based curve-fitting approach in thickness estimation. △ Less

Submitted 28 October, 2020; v1 submitted 16 June, 2020; originally announced June 2020.

Comments: 5 Pages, Accepted in IEEE Sensor Letters, Sept. 2020