Showing 1–49 of 49 results for author: Seco-Granados, G

Theoretical and Experimental Evaluation of AoA Estimation in Single-Anchor 5G Uplink Positioning

Authors: Thodoris Spanos, Fran Fabra, José A. López-Salcedo, Gonzalo Seco-Granados, Nikos Kanistras, Ivan Lapin, Vassilis Paliouras

Abstract: As we move towards 6G, the demand for high-precision, cost-effective positioning solutions becomes increasingly critical. Single-anchor positioning offers a promising alternative to traditional multi-anchor approaches, particularly in complex propagation environments where infrastructure costs and deployment constraints present significant challenges. This paper provides a comprehensive evaluation… ▽ More As we move towards 6G, the demand for high-precision, cost-effective positioning solutions becomes increasingly critical. Single-anchor positioning offers a promising alternative to traditional multi-anchor approaches, particularly in complex propagation environments where infrastructure costs and deployment constraints present significant challenges. This paper provides a comprehensive evaluation of key algorithmic choices in the development of a single-anchor 5G uplink positioning testbed. Our developed testbed uses angle of arrival (AoA) estimation combined with range measurements from an ultra-wideband pair, to derive the position. The simulations conducted assess the impact of the selected algorithms on channel order and AoA estimation, while the influence of antenna calibration errors on AoA estimation is also examined. Finally, we compare simulations and results obtained from our developed platform. △ Less

Submitted 11 June, 2025; v1 submitted 8 June, 2025; originally announced June 2025.

Comments: 6 pages, 6 figures, 2 tables Accepted for publication in the 2025 IEEE International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC), Istanbul, Turkey, September 1-4, 2025; to appear in IEEE PIMRC 2025 proceedings. \c{opyright} 2025 IEEE. Personal use of this material is permitted

Joint Localization and Synchronization in Downlink Distributed MIMO

Authors: Sauradeep Dey, Musa Furkan Keskin, Dario Tagliaferri, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We investigate joint localization and synchronization in the downlink of a distributed multiple-input-multiple-output (D-MIMO) system, aiming to estimate the position and phase offset of a single-antenna user equipment (UE) using downlink transmissions of multiple phase-synchronized, multi-antenna access points (APs). We propose two transmission protocols: sequential (P1) and simultaneous (P2) AP… ▽ More We investigate joint localization and synchronization in the downlink of a distributed multiple-input-multiple-output (D-MIMO) system, aiming to estimate the position and phase offset of a single-antenna user equipment (UE) using downlink transmissions of multiple phase-synchronized, multi-antenna access points (APs). We propose two transmission protocols: sequential (P1) and simultaneous (P2) AP transmissions, together with the ML estimators that either leverage (coherent estimator) or disregard phase information (non-coherent estimator). Simulation results reveal that downlink D-MIMO holds significant potential for high-accuracy localization while showing that P2 provides superior localization performance and reduced transmission latency. △ Less

Submitted 14 April, 2025; originally announced April 2025.

Integrated 6G TN and NTN Localization: Challenges, Opportunities, and Advancements

Authors: Sharief Saleh, Pinjun Zheng, Xing Liu, Hui Chen, Musa Furkan Keskin, Basuki Priyanto, Martin Beale, Yasaman Ettefagh, Gonzalo Seco-Granados, Tareq Y. Al-Naffouri, Henk Wymeersch

Abstract: The rapid evolution of cellular networks has introduced groundbreaking technologies, including large and distributed antenna arrays and reconfigurable intelligent surfaces in terrestrial networks (TNs), as well as aerial and space-based nodes in non-terrestrial networks (NTNs). These advancements enable applications beyond traditional communication, such as high-precision localization and sensing.… ▽ More The rapid evolution of cellular networks has introduced groundbreaking technologies, including large and distributed antenna arrays and reconfigurable intelligent surfaces in terrestrial networks (TNs), as well as aerial and space-based nodes in non-terrestrial networks (NTNs). These advancements enable applications beyond traditional communication, such as high-precision localization and sensing. While integrating TN and NTN enablers will lead to unparalleled opportunities for seamless global localization, such integration attempts are expected to face several challenges. To understand these opportunities and challenges, we first examine the distinctive characteristics of the key 6G enablers, evaluating their roles in localization from both technical and practical perspectives. Next, to identify developments driving TN-NTN localization, we review the latest standardization and industrial innovation progress. Finally, we discuss the opportunities and challenges of TN-NTN integration, illustrating its potential through two numerical case studies. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Comments: 8 pages, 5 figures, submitted to IEEE Communications Standards Magazine: Special issue on Integrated Terrestrial and Non-Terrestrial Networks

Angle of Arrival Estimation Using SRS in 5G NR Uplink Scenarios

Authors: Thodoris Spanos, Fran Fabra, José A. López-Salcedo, Gonzalo Seco-Granados, Nikos Kanistras, Ivan Lapin, Vassilis Paliouras

Abstract: This paper presents a comprehensive exploration of Angle of Arrival (AoA) estimation techniques in 5G environments, using the Sounding Reference Signal (SRS) in Uplink scenarios both in simulations and with actual measurements. Leveraging 5G capabilities, we investigate AoA algorithms for single-base station positioning. The study includes simulations and practical tests on a developed dedicated t… ▽ More This paper presents a comprehensive exploration of Angle of Arrival (AoA) estimation techniques in 5G environments, using the Sounding Reference Signal (SRS) in Uplink scenarios both in simulations and with actual measurements. Leveraging 5G capabilities, we investigate AoA algorithms for single-base station positioning. The study includes simulations and practical tests on a developed dedicated testbed featuring a base station equipped with a three-element Uniform Linear Array (ULA), considering Line of Sight conditions in an open environment. The testbed, employing Ettus E312 as the transmitter and Ettus N310 as the receiver, details waveform structures and reception processes. Additionally, our study examines the performance of Angle of Arrival (AoA) estimation algorithms, such as Multiple Signal Classification (MUSIC), Estimation of Signal Parameters via Rotational Invariant Techniques (ESPRIT), and Joint Angle and Delay Estimation (JADE) ESPRIT. A MATLAB ray tracing propagation model of the environment where the measurements are conducted, has been constructed. Simulation results using this model are presented, along with the actual measurements. The obtained results affirm the effectiveness of our implementation. △ Less

Submitted 25 November, 2024; originally announced November 2024.

Comments: 12 pages, 8 figures, in WIPHAL, 2024

USRP-Based Single Anchor Positioning: AoA with 5G Uplink Signals, and UWB Ranging

Authors: Thodoris Spanos, Fran Fabra, José A. López-Salcedo, Gonzalo Seco-Granados, Nikos Kanistras, Ivan Lapin, Vassilis Paliouras

Abstract: This paper presents a novel testbed designed for 5th-Generation (5G) positioning using Universal Software Radio Peripherals (USRPs). The testbed integrates multiple units: an Operation Unit for test management, a User Unit equipped with an Ettus E312 USRP, and a Station Unit featuring an Ettus N310 USRP equipped with a three-element Uniform Linear Array for Angle of Arrival estimation. Alongside u… ▽ More This paper presents a novel testbed designed for 5th-Generation (5G) positioning using Universal Software Radio Peripherals (USRPs). The testbed integrates multiple units: an Operation Unit for test management, a User Unit equipped with an Ettus E312 USRP, and a Station Unit featuring an Ettus N310 USRP equipped with a three-element Uniform Linear Array for Angle of Arrival estimation. Alongside ultra wideband ranging, the testbed estimates the user's position relative to the base station. Signal processing algorithms are executed in a dedicated processing unit. Key challenges addressed include phase misalignment between RX channel pairs due to different Local Oscillators in the Ettus N310, necessitating real-time calibration for precise signal alignment. High sampling rates (up to 61.44 MSps) result in large IQ sample files, managed efficiently using a snapshot technique to optimize storage without compromising testbed positioning capabilities. The testbed synchronizes angular measurements with ranging estimates allowing consistent performance evaluation for real-life cases of dynamic users (e.g. pedestrian). Experimental results demonstrate the testbed's effectiveness in achieving accurate pedestrian user localization. △ Less

Submitted 25 November, 2024; originally announced November 2024.

Comments: 5 pages, 6 figures, to be presented in an ESA workshop

Location and Map-Assisted Wideband Phase and Time Calibration Between Distributed Antennas

Authors: Yibo Wu, Musa Furkan Keskin, Ulf Gustavsson, Gonzalo Seco-Granados, Erik G. Larsson, Henk Wymeersch

Abstract: Distributed massive multiple-input multiple-output networks utilize a large number of distributed access points (APs) to serve multiple user equipments (UEs), offering significant potential for both communication and localization. However, these networks require frequent phase and time calibration between distributed antennas due to oscillator phase drifts, crucial for reciprocity-based coherent b… ▽ More Distributed massive multiple-input multiple-output networks utilize a large number of distributed access points (APs) to serve multiple user equipments (UEs), offering significant potential for both communication and localization. However, these networks require frequent phase and time calibration between distributed antennas due to oscillator phase drifts, crucial for reciprocity-based coherent beamforming and accurate localization. While this calibration is typically performed through bi-directional measurements between antennas, it can be simplified to unidirectional measurement under perfect knowledge of antenna locations. This paper extends a recent phase calibration narrowband line-of-sight (LoS) model to a phase and time calibration wideband orthogonal frequency division multiplexing model, including both LoS and reflection paths and allowing for joint phase and time calibrations. We explore different scenarios, considering whether or not prior knowledge of antenna locations and the map is available. For each case, we introduce a practical maximum likelihood estimator and conduct Cramer-Rao lower bound (CRLB) analyses to benchmark performance. Simulations validate our estimators against the CRLB in these scenarios. △ Less

Submitted 21 January, 2025; v1 submitted 30 October, 2024; originally announced October 2024.

Comments: An updated version to GLOBECOM workshop 2024

6G RIS-aided Single-LEO Localization with Slow and Fast Doppler Effects

Authors: Sharief Saleh, Musa Furkan Keskin, Basuki Priyanto, Martin Beale, Pinjun Zheng, Tareq Y. Al-Naffouri, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: 6G networks aim to enable applications like autonomous driving by providing complementary localization services through key technologies such as non-terrestrial networks (NTNs) with low Earth orbit (LEO) satellites and reconfigurable intelligent surfaces (RIS). Prior research in 6G localization using single LEO, multi-LEO, and multi-LEO multi-RIS setups has limitations: single LEO lacks the requir… ▽ More 6G networks aim to enable applications like autonomous driving by providing complementary localization services through key technologies such as non-terrestrial networks (NTNs) with low Earth orbit (LEO) satellites and reconfigurable intelligent surfaces (RIS). Prior research in 6G localization using single LEO, multi-LEO, and multi-LEO multi-RIS setups has limitations: single LEO lacks the required accuracy, while multi-LEO/RIS setups demand many visible satellites and RISs, which is not always feasible in practice. This paper explores the novel problem of localization with a single LEO satellite and a single RIS, bridging these research areas. We present a comprehensive signal model accounting for user carrier frequency offset (CFO), clock bias, and fast and slow Doppler effects. Additionally, we derive a low-complexity estimator that achieves theoretical bounds at high signal-to-noise ratios (SNR). Our results demonstrate the feasibility and accuracy of RIS-aided single-LEO localization in 6G networks and highlight potential research directions. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: Accepted for publication in IEEE GLOBECOM Workshops 2024

Joint Localization, Synchronization and Mapping via Phase-Coherent Distributed Arrays

Authors: Alessio Fascista, Benjamin J. B. Deutschmann, Musa Furkan Keskin, Thomas Wilding, Angelo Coluccia, Klaus Witrisal, Erik Leitinger, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: Extremely large-scale antenna array (ELAA) systems emerge as a promising technology in beyond 5G and 6G wireless networks to support the deployment of distributed architectures. This paper explores the use of ELAAs to enable joint localization, synchronization and mapping in sub-6 GHz uplink channels, capitalizing on the near-field effects of phase-coherent distributed arrays. We focus on a scenar… ▽ More Extremely large-scale antenna array (ELAA) systems emerge as a promising technology in beyond 5G and 6G wireless networks to support the deployment of distributed architectures. This paper explores the use of ELAAs to enable joint localization, synchronization and mapping in sub-6 GHz uplink channels, capitalizing on the near-field effects of phase-coherent distributed arrays. We focus on a scenario where a single-antenna user equipment (UE) communicates with a network of access points (APs) distributed in an indoor environment, considering both specular reflections from walls and scattering from objects. The UE is assumed to be unsynchronized to the network, while the APs can be time- and phase-synchronized to each other. We formulate the problem of joint estimation of location, clock offset and phase offset of the UE, and the locations of scattering points (SPs) (i.e., mapping). Through comprehensive Fisher information analysis, we assess the impact of bandwidth, AP array size, wall reflections, SPs and phase synchronization on localization accuracy. Furthermore, we derive the maximum-likelihood (ML) estimator, which optimally combines the information collected by all the distributed arrays. To overcome its intractable high dimensionality, we propose a novel three-step algorithm that first estimates phase offset leveraging carrier phase information of line-of-sight (LoS) paths, then determines the UE location and clock offset via LoS paths and wall reflections, and finally locates SPs using a null-space transformation technique. Simulation results demonstrate the effectiveness of our approach in distributed architectures supported by radio stripes (RSs) -- an innovative alternative for implementing ELAAs -- while revealing the benefits of carrier phase exploitation and showcasing the interplay between delay and angular information under different bandwidth regimes. △ Less

Submitted 19 September, 2024; originally announced September 2024.

Frugal RIS-aided 3D Localization with CFO under LoS and NLoS Conditions

Authors: Yasaman Ettefagh, Musa Furkan Keskin, Kamran Keykhosravi, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: In this paper, we investigate 3-D localization and frequency synchronization with multiple reconfigurable intelligent surfaces (RISs) in the presence of carrier frequency offset (CFO) for a stationary user equipment (UE). In line with the 6G goals of sustainability and efficiency, we focus on a frugal communication scenario with minimal spatial and spectral resources (i.e., narrowband single-input… ▽ More In this paper, we investigate 3-D localization and frequency synchronization with multiple reconfigurable intelligent surfaces (RISs) in the presence of carrier frequency offset (CFO) for a stationary user equipment (UE). In line with the 6G goals of sustainability and efficiency, we focus on a frugal communication scenario with minimal spatial and spectral resources (i.e., narrowband single-input single-ouput system), considering both the presence and blockage of the line-of-sight (LoS) path between the base station (BS) and the UE. We design a generalized likelihood ratio test (GLRT)-based LoS detector, channel parameter estimation and localization algorithms, with varying complexity. To verify the efficiency of our estimators, we compare the root mean-squared error (RMSE) to the Cramér- Rao bound (CRB) of the unknown parameters. We also evaluate the sensitivity of our algorithms to the presence of uncontrolled multi-path components (MPC) and various levels of CFO. Simulation results showcase the effectiveness of the proposed algorithms under minimal hardware and spectral requirements, and a wide range of operating conditions, thereby confirming the viability of RIS-aided frugal localization in 6G scenarios. △ Less

Submitted 3 September, 2024; originally announced September 2024.

Comments: 13 pages, 11 figures

Improving 3D Cellular Positioning Integrity with Bayesian RAIM

Authors: Liqin Ding, Gonzalo Seco-Granados, Hyowon Kim, Russ Whiton, Erik G. Ström, Jonas Sjöberg, Henk Wymeersch

Abstract: Ensuring positioning integrity amid faulty measurements is crucial for safety-critical applications, making receiver autonomous integrity monitoring (RAIM) indispensable. This paper introduces a Bayesian RAIM algorithm with a streamlined architecture for snapshot-type 3D cellular positioning. Unlike traditional frequentist-type RAIM algorithms, it computes the exact posterior probability density f… ▽ More Ensuring positioning integrity amid faulty measurements is crucial for safety-critical applications, making receiver autonomous integrity monitoring (RAIM) indispensable. This paper introduces a Bayesian RAIM algorithm with a streamlined architecture for snapshot-type 3D cellular positioning. Unlike traditional frequentist-type RAIM algorithms, it computes the exact posterior probability density function (PDF) of the position vector as a Gaussian mixture (GM) model using efficient message passing along a factor graph. This Bayesian approach retains all crucial information from the measurements, eliminates the need to discard faulty measurements, and results in tighter protection levels (PLs) in 3D space and 1D/2D subspaces that meet target integrity risk (TIR) requirements. Numerical simulations demonstrate that the Bayesian RAIM algorithm significantly outperforms a baseline algorithm, achieving over $50\%$ PL reduction at a comparable computational cost. △ Less

Submitted 9 August, 2024; originally announced August 2024.

Comments: Submitted to IEEE Transactions on Vehicular Technology

Improving Galileo OSNMA Time To First Authenticated Fix

Authors: Aleix Galan, Ignacio Fernandez-Hernandez, Wim De Wilde, Sofie Pollin, Gonzalo Seco-Granados

Abstract: Galileo is the first global navigation satellite system to authenticate their civilian signals through the Open Service Galileo Message Authentication (OSNMA) protocol. However, OSNMA delays the time to obtain a first position and time fix, the Time To First Authentication Fix (TTFAF). Reducing the TTFAF as much as possible is crucial to integrate the technology seamlessly into the current product… ▽ More Galileo is the first global navigation satellite system to authenticate their civilian signals through the Open Service Galileo Message Authentication (OSNMA) protocol. However, OSNMA delays the time to obtain a first position and time fix, the Time To First Authentication Fix (TTFAF). Reducing the TTFAF as much as possible is crucial to integrate the technology seamlessly into the current products. In the cases where the receiver already has cryptographic data available, the so-called hot start mode and focus of this article, the currently available implementations achieve an average TTFAF of around 100 seconds in ideal environments. In this work, we explore the TTFAF optimizations available to general OSNMA capable receivers and to receivers with a tighter time synchronization than the required by the OSNMA guidelines. We dissect the TTFAF process, describe the optimizations, and benchmark them in three distinct scenarios with recorded real data (open-sky, soft urban, and hard urban) and the official OSNMA test vectors. The first block of optimizations centers on extracting as much information as possible from broken sub-frames by processing them at page level and combining redundant data from multiple satellites. The second block of optimizations aims to reconstruct missed navigation data by the intelligent use of fields in the authentication tags belonging to the same sub-frame as the authentication key. Combining both optimization ideas improves the TTFAF substantially for all considered scenarios. We obtain an average TTFAF of 60.9 and 68.8 seconds for the test vectors and the open-sky scenario, respectively, with a lowest TTFAF of 44.0 seconds in both. Likewise, the urban scenarios see a drastic reduction of the average TTFAF between the non-optimized and optimized cases. These optimizations have been made available as part of the open-source OSNMAlib library on GitHub. △ Less

Submitted 21 October, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Comments: This work has been submitted to the IEEE for possible publication. 15 pages, 17 figures. Updated version with major changes. New sections II-B, IV-A, IV-C. Updated sections IV-B, VI-D. Acronym changes and fixed typos

LEO Satellite and RIS: Two Keys to Seamless Indoor and Outdoor Localization

Authors: Pinjun Zheng, Xing Liu, Yuchen Zhang, Jiguang He, Gonzalo Seco-Granados, Tareq Y. Al-Naffouri

Abstract: The contemporary landscape of wireless technology underscores the critical role of precise localization services. Traditional global navigation satellite systems (GNSS)-based solutions, however, fall short when it comes to indoor environments, and existing indoor localization techniques such as electromagnetic fingerprinting methods face challenges of additional implementation costs and limited co… ▽ More The contemporary landscape of wireless technology underscores the critical role of precise localization services. Traditional global navigation satellite systems (GNSS)-based solutions, however, fall short when it comes to indoor environments, and existing indoor localization techniques such as electromagnetic fingerprinting methods face challenges of additional implementation costs and limited coverage. This article explores an innovative solution that blends low Earth orbit (LEO) satellites with reconfigurable intelligent surfaces (RISs), unlocking its potential for realizing seamless indoor and outdoor localization (SIOL) with global coverage. After a comprehensive review of the distinctive characteristics of LEO satellites and RISs, we showcase their potential for SIOL applications through two case studies on position error bound evaluation. Finally, we discuss system architectures and highlight open challenges in such systems. △ Less

Submitted 12 February, 2025; v1 submitted 28 December, 2023; originally announced December 2023.

RIS Position and Orientation Estimation via Multi-Carrier Transmissions and Multiple Receivers

Authors: Reza Ghazalian, Hui Chen, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization… ▽ More Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization in a semi-passive manner. In this paper, we consider a static user equipped with an RIS and study the RIS localization problem (i.e., joint three-dimensional position and orientation estimation), when operating in a system comprising a single-antenna transmitter and multiple synchronized single-antenna receivers with known locations. We present a multi-stage estimator using time-of-arrival and spatial frequency measurements, and derive the Cramér-Rao lower bounds for the estimated parameters to validate the estimator's performance. Our simulation results demonstrate the efficiency of the proposed RIS state estimation approach under various system operation parameters. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Fundamental Performance Bounds for Carrier Phase Positioning in Cellular Networks

Authors: Henk Wymeersch, Rouhollah Amiri, Gonzalo Seco-Granados

Abstract: The carrier phase of cellular signals can be utilized for highly accurate positioning, with the potential for orders-of-magnitude performance improvements compared to standard time-difference-of-arrival positioning. Due to the integer ambiguities, standard performance evaluation tools such as the Cramér-Rao bound (CRB) are overly optimistic. In this paper, a new performance bound, called the mixed… ▽ More The carrier phase of cellular signals can be utilized for highly accurate positioning, with the potential for orders-of-magnitude performance improvements compared to standard time-difference-of-arrival positioning. Due to the integer ambiguities, standard performance evaluation tools such as the Cramér-Rao bound (CRB) are overly optimistic. In this paper, a new performance bound, called the mixed-integer CRB (MICRB) is introduced that explicitly accounts for this integer ambiguity. While computationally more complex than the standard CRB, the MICRB can accurately predict positioning performance, as verified by numerical simulations, and hence it serves as a useful guide to choose the system parameters that facilitate carrier phase positioning. △ Less

Submitted 1 September, 2023; v1 submitted 21 June, 2023; originally announced June 2023.

Uplink Joint Positioning and Synchronization in Cell-Free Deployments with Radio Stripes

Authors: Alessio Fascista, Benjamin J. B. Deutschmann, Musa Furkan Keskin, Thomas Wilding, Angelo Coluccia, Klaus Witrisal, Erik Leitinger, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: Radio stripes (RSs) is an emerging technology in beyond 5G and 6G wireless networks to support the deployment of cell-free architectures. In this paper, we investigate the potential use of RSs to enable joint positioning and synchronization in the uplink channel at sub-6 GHz bands. The considered scenario consists of a single-antenna user equipment (UE) that communicates with a network of multiple… ▽ More Radio stripes (RSs) is an emerging technology in beyond 5G and 6G wireless networks to support the deployment of cell-free architectures. In this paper, we investigate the potential use of RSs to enable joint positioning and synchronization in the uplink channel at sub-6 GHz bands. The considered scenario consists of a single-antenna user equipment (UE) that communicates with a network of multiple-antenna RSs distributed over a wide area. The UE is assumed to be unsynchronized to the RSs network, while individual RSs are time- and phase-synchronized. We formulate the problem of joint estimation of position, clock offset, and phase offset of the UE and derive the corresponding maximum-likelihood (ML) estimator, both with and without exploiting carrier phase information. To gain fundamental insights into the achievable performance, we also conduct a Fisher information analysis and inspect the theoretical lower bounds numerically. Simulation results demonstrate that promising positioning and synchronization performance can be obtained in cell-free architectures supported by RSs, revealing at the same time the benefits of carrier phase exploitation through phase-synchronized RSs. △ Less

Submitted 7 February, 2023; originally announced February 2023.

RISs and Sidelink Communications in Smart Cities: The Key to Seamless Localization and Sensing

Authors: Hui Chen, Hyowon Kim, Mustafa Ammous, Gonzalo Seco-Granados, George C. Alexandropoulos, Shahrokh Valaee, Henk Wymeersch

Abstract: A smart city involves, among other elements, intelligent transportation, crowd monitoring, and digital twins, each of which requires information exchange via wireless communication links and localization of connected devices and passive objects (including people). Although localization and sensing (L&S) are envisioned as core functions of future communication systems, they have inherently differen… ▽ More A smart city involves, among other elements, intelligent transportation, crowd monitoring, and digital twins, each of which requires information exchange via wireless communication links and localization of connected devices and passive objects (including people). Although localization and sensing (L&S) are envisioned as core functions of future communication systems, they have inherently different demands in terms of infrastructure compared to communications. Wireless communications generally requires a connection to only a single access point (AP), while L&S demand simultaneous line-of-sight propagation paths to several APs, which serve as location and orientation anchors. Hence, a smart city deployment optimized for communication will be insufficient to meet stringent L&S requirements. In this article, we argue that the emerging technologies of reconfigurable intelligent surfaces (RISs) and sidelink communications constitute the key to providing ubiquitous coverage for L&S in smart cities with low-cost and energy-efficient technical solutions. To this end, we propose and evaluate AP-coordinated and self-coordinated RIS-enabled L&S architectures and detail three groups of application scenarios, relying on low-complexity beacons, cooperative localization, and full-duplex transceivers. A list of practical issues and consequent open research challenges of the proposed L&S systems is also provided. △ Less

Submitted 9 March, 2023; v1 submitted 9 January, 2023; originally announced January 2023.

ESPRIT-Oriented Precoder Design for mmWave Channel Estimation

Authors: Musa Furkan Keskin, Alessio Fascista, Fan Jiang, Angelo Coluccia, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We consider the problem of ESPRIT-oriented precoder design for beamspace angle-of-departure (AoD) estimation in downlink mmWave multiple-input single-output communications. Standard precoders (i.e., directional/sum beams) yield poor performance in AoD estimation, while Cramer-Rao bound-optimized precoders undermine the so-called shift invariance property (SIP) of ESPRIT. To tackle this issue, the… ▽ More We consider the problem of ESPRIT-oriented precoder design for beamspace angle-of-departure (AoD) estimation in downlink mmWave multiple-input single-output communications. Standard precoders (i.e., directional/sum beams) yield poor performance in AoD estimation, while Cramer-Rao bound-optimized precoders undermine the so-called shift invariance property (SIP) of ESPRIT. To tackle this issue, the problem of designing ESPRIT-oriented precoders is formulated to jointly optimize over the precoding matrix and the SIP-restoring matrix of ESPRIT. We develop an alternating optimization approach that updates these two matrices under unit-modulus constraints for analog beamforming architectures. Simulation results demonstrate the validity of the proposed approach while providing valuable insights on the beampatterns of the ESPRIT-oriented precoders. △ Less

Submitted 4 January, 2023; originally announced January 2023.

RIS-Aided Monostatic Sensing and Object Detection with Single and Double Bounce Multipath

Authors: Hyowon Kim, Alessio Fascista, Hui Chen, Yu Ge, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of th… ▽ More We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of the links. Then, we estimate the passive objects using both the double-bounce signals via passive RIS (i.e., RIS-sensing) and the single-bounce multipath direct to the objects (i.e., non-RIS-sensing), based on a mapping filter. Finally, we provide numerical results to demonstrate that effective sensing can be achieved through the proposed framework. △ Less

Submitted 13 November, 2023; v1 submitted 14 December, 2022; originally announced December 2022.

RIS-Enabled SISO Localization under User Mobility and Spatial-Wideband Effects

Authors: Kamran Keykhosravi, Musa Furkan Keskin, Gonzalo Seco-Granados, Petar Popovski, Henk Wymeersch

Abstract: Reconfigurable intelligent surface (RIS) is a promising technological enabler for the 6th generation (6G) of wireless systems with applications in localization and communication. In this paper, we consider the problem of positioning a single-antenna user in 3D space based on the received signal from a single-antenna base station and reflected signal from an RIS by taking into account the mobility… ▽ More Reconfigurable intelligent surface (RIS) is a promising technological enabler for the 6th generation (6G) of wireless systems with applications in localization and communication. In this paper, we consider the problem of positioning a single-antenna user in 3D space based on the received signal from a single-antenna base station and reflected signal from an RIS by taking into account the mobility of the user and spatial-wideband (WB) effects. To do so, we first derive the spatial-WB channel model under the far-field assumption, for orthogonal frequency-division multiplexing signal transmission with the user having a constant velocity. We derive the Cramer Rao bounds to serve as a benchmark. Furthermore, we devise a low-complexity estimator that attains the bounds in high signal-to-noise ratios. Our estimator neglects the spatial-WB effects and deals with the user mobility by estimating the radial velocities and compensating for their effects in an iterative fashion. We show that the spatial-WB effects can degrade the localization accuracy for large RIS sizes and large signal bandwidths as the direction of arrival or departure deviate from the RIS normal. In particular, for a 64X64 RIS, the proposed estimator is resilient against the spatial-WB effects up to 140 MHz bandwidth. Regarding user mobility, our results suggest that the velocity of the user influences neither the bounds nor the accuracy of our estimator. Specifically, we observe that the state of the user with a high speed (42 m/s) can be estimated virtually with the same accuracy as a static user. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Journal ref: IEEE Journal of Selected Topics in Signal Processing, vol. 16, no. 5, pp. 1125-1140, Aug. 2022

Bayesian Integrity Monitoring for Cellular Positioning -- A Simplified Case Study

Authors: Liqin Ding, Gonzalo Seco-Granados, Hyowon Kim, Russ Whiton, Erik G. Ström, Jonas Sjöberg, Henk Wymeersch

Abstract: Bayesian receiver autonomous integrity monitoring (RAIM) algorithms are developed for the snapshot cellular positioning problem in a simplified one-dimensional (1D) linear Gaussian setting. Position estimation, multi-fault detection and exclusion, and protection level (PL) computation are enabled by the efficient and exact computation of the position posterior probabilities via message passing alo… ▽ More Bayesian receiver autonomous integrity monitoring (RAIM) algorithms are developed for the snapshot cellular positioning problem in a simplified one-dimensional (1D) linear Gaussian setting. Position estimation, multi-fault detection and exclusion, and protection level (PL) computation are enabled by the efficient and exact computation of the position posterior probabilities via message passing along a factor graph. Computer simulations demonstrate the significant performance improvement of the proposed Bayesian RAIM algorithms over a baseline advanced RAIM algorithm, as it obtains tighter PLs that meet the target integrity risk (TIR) requirements. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Joint User Localization and Location Calibration of A Hybrid Reconfigurable Intelligent Surface

Authors: Reza Ghazalian, Hui Chen, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: The recent research in the emerging technology of reconfigurable intelligent surfaces (RISs) has identified its high potential for localization and sensing. However, to accurately localize a user placed in the area of influence of an RIS, the RIS location needs to be known a priori and its phase profile is required to be optimized for localization. In this paper, we study the problem of the joint… ▽ More The recent research in the emerging technology of reconfigurable intelligent surfaces (RISs) has identified its high potential for localization and sensing. However, to accurately localize a user placed in the area of influence of an RIS, the RIS location needs to be known a priori and its phase profile is required to be optimized for localization. In this paper, we study the problem of the joint localization of a hybrid RIS (HRIS) and a user, considering that the former is equipped with a single reception radio-frequency (RF) chain enabling simultaneous tunable reflections and sensing via power splitting. Focusing on the downlink of a multi-antenna base station, we present a multi-stage approach for the estimation of the HRIS position and orientation as well as the user position. Our simulation results, including comparisons with the Cramér-Rao lower bounds, demonstrate the efficiency of the proposed localization approach, while showcasing that there exists an optimal HRIS power splitting ratio for the desired multi-parameter estimation problem. △ Less

Submitted 18 October, 2022; originally announced October 2022.

Radio Localization and Sensing -- Part II: State-of-the-art and Challenges

Authors: Henk Wymeersch, Gonzalo Seco-Granados

Abstract: This letter is part of a two-letter tutorial on radio localization and sensing, with a focus on mobile radio systems, i.e., 5G and beyond. Building on Part I, which focused on the fundamentals, here we go deeper into the state-of-the-art advances, as well as 6G, covering enablers and challenges related to modeling, coverage, and accuracy. This letter is part of a two-letter tutorial on radio localization and sensing, with a focus on mobile radio systems, i.e., 5G and beyond. Building on Part I, which focused on the fundamentals, here we go deeper into the state-of-the-art advances, as well as 6G, covering enablers and challenges related to modeling, coverage, and accuracy. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Radio Localization and Sensing -- Part I: Fundamentals

Authors: Henk Wymeersch, Gonzalo Seco-Granados

Abstract: This letter is part of a two-letter tutorial on radio localization and sensing, with focus on mobile radio systems in 5G mmWave and beyond. Part I introduces the fundamentals, covering an overview of the relevant literature, as well as the different aspects of localization and sensing problems. Then, different performance metrics are presented, which are important in the evaluation of methods. Met… ▽ More This letter is part of a two-letter tutorial on radio localization and sensing, with focus on mobile radio systems in 5G mmWave and beyond. Part I introduces the fundamentals, covering an overview of the relevant literature, as well as the different aspects of localization and sensing problems. Then, different performance metrics are presented, which are important in the evaluation of methods. Methods are detailed in the last part of this letter. Part I thus provides the necessary background to delve into more forward-looking problems in Part II. △ Less

Submitted 3 September, 2022; v1 submitted 1 September, 2022; originally announced September 2022.

Comments: Fixed typo in footnote 6

Cramér-Rao Bound Analysis of Radars for Extended Vehicular Targets with Known and Unknown Shape

Authors: Nil Garcia, Alessio Fascista, Angelo Coluccia, Henk Wymeersch, Canan Aydogdu, Rico Mendrzik, Gonzalo Seco-Granados

Abstract: Due to their shorter operating range and large bandwidth, automotive radars can resolve many reflections from their targets of interest, mainly vehicles. This calls for the use of extended-target models in place of simpler and more widely-adopted point-like target models. However, despite some preliminary work, the fundamental connection between the radar's accuracy as a function of the target veh… ▽ More Due to their shorter operating range and large bandwidth, automotive radars can resolve many reflections from their targets of interest, mainly vehicles. This calls for the use of extended-target models in place of simpler and more widely-adopted point-like target models. However, despite some preliminary work, the fundamental connection between the radar's accuracy as a function of the target vehicle state (range, orientation, shape) and radar properties remains largely unknown for extended targets. In this work, we first devise a mathematically tractable analytical model for a vehicle with arbitrary shape, modeled as an extended target parameterized by the center position, the orientation (heading) and the perimeter contour. We show that the derived expressions of the backscatter signal are tractable and correctly capture the effects of the extended-vehicle shape. Analytical derivations of the exact and approximate hybrid Cramér-Rao bounds for the position, orientation and contour are provided, which reveal connections with the case of point-like target and uncover the main dependencies with the received energy, bandwidth, and array size. The theoretical investigation is performed on the two different cases of known and unknown vehicle shape. Insightful simulation results are finally presented to validate the theoretical findings, including an analysis of the diversity effect of multiple radars sensing the extended target. △ Less

Submitted 11 July, 2022; originally announced July 2022.

Comments: 16 pages, double-column, 4 figures, 2 tables, journal

Semi-Assisted Signal Authentication based on Galileo ACAS

Authors: Ignacio Fernandez-Hernandez, Simon Cancela, Rafael Terris-Gallego, Gonzalo Seco-Granados, José A. López-Salcedo, C. O'Driscoll, J. Winkel, A. dalla Chiara, C. Sarto, Vincent Rijmen, Daniel Blonski, Javier de Blas

Abstract: A GNSS signal authentication concept named semi-assisted authentication is proposed. It is based on the re-encryption and publication of keystream sequences of some milliseconds from an already existing encrypted signal. Some seconds after the keystreams are transmitted in the signal-in-space, the signal broadcasts the key allowing to decrypt the sequences and the a-posteriori correlation at the r… ▽ More A GNSS signal authentication concept named semi-assisted authentication is proposed. It is based on the re-encryption and publication of keystream sequences of some milliseconds from an already existing encrypted signal. Some seconds after the keystreams are transmitted in the signal-in-space, the signal broadcasts the key allowing to decrypt the sequences and the a-posteriori correlation at the receiver. The concept is particularized as Galileo Assisted Commercial Authentication Service, or ACAS, for Galileo E1-B, with OSNMA used for the decryption keys, and E6C, assumed to be encrypted in the near future. This work proposes the ACAS cryptographic operations and a model for signal processing and authentication verification. Semi-assisted authentication can be provided without any modification to the signal plan of an existing GNSS, without the disclosure of signal encryption keys, and for several days of receiver autonomy, depending on its storage capabilities. △ Less

Submitted 3 June, 2022; v1 submitted 29 April, 2022; originally announced April 2022.

RIS-aided Joint Localization and Synchronization with a Single-Antenna Receiver: Beamforming Design and Low-Complexity Estimation

Authors: Alessio Fascista, Musa Furkan Keskin, Angelo Coluccia, Henk Wymeersch, Gonzalo Seco-Granados

Abstract: Reconfigurable intelligent surfaces (RISs) have attracted enormous interest thanks to their ability to overcome line-of-sight blockages in mmWave systems, enabling in turn accurate localization with minimal infrastructure. Less investigated are however the benefits of exploiting RIS with suitably designed beamforming strategies for optimized localization and synchronization performance. In this pa… ▽ More Reconfigurable intelligent surfaces (RISs) have attracted enormous interest thanks to their ability to overcome line-of-sight blockages in mmWave systems, enabling in turn accurate localization with minimal infrastructure. Less investigated are however the benefits of exploiting RIS with suitably designed beamforming strategies for optimized localization and synchronization performance. In this paper, a novel low-complexity method for joint localization and synchronization based on an optimized design of the base station (BS) active precoding and RIS passive phase profiles is proposed, for the challenging case of a single-antenna receiver. The theoretical position error bound is first derived and used as metric to jointly optimize the BS-RIS beamforming, assuming a priori knowledge of the user position. By exploiting the low-dimensional structure of the solution, a novel codebook-based robust design strategy with optimized beam power allocation is then proposed, which provides low-complexity while taking into account the uncertainty on the user position. Finally, a reduced-complexity maximum-likelihood based estimation procedure is devised to jointly recover the user position and the synchronization offset. Extensive numerical analysis shows that the proposed joint BS-RIS beamforming scheme provides enhanced localization and synchronization performance compared to existing solutions, with the proposed estimator attaining the theoretical bounds even at low signal-to-noise-ratio and in the presence of additional uncontrollable multipath propagation. △ Less

Submitted 28 April, 2022; originally announced April 2022.

MmWave 6D Radio Localization with a Snapshot Observation from a Single BS

Authors: Mohammad A. Nazari, Gonzalo Seco-Granados, Pontus Johannisson, Henk Wymeersch

Abstract: Accurate and ubiquitous localization is crucial for a variety of applications such as logistics, navigation, intelligent transport, monitoring, control, and also for the benefit of communications. Exploiting millimeter-wave (mmWave) signals in 5G and Beyond 5G systems can provide accurate localization with limited infrastructure. We consider the single base station (BS) localization problem and ex… ▽ More Accurate and ubiquitous localization is crucial for a variety of applications such as logistics, navigation, intelligent transport, monitoring, control, and also for the benefit of communications. Exploiting millimeter-wave (mmWave) signals in 5G and Beyond 5G systems can provide accurate localization with limited infrastructure. We consider the single base station (BS) localization problem and extend it to 3D position and 3D orientation estimation of an unsynchronized multi-antenna user equipment (UE), using downlink multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) signals. Through a Fisher information analysis, we show that the problem is often identifiable, provided that there is at least one multipath component in addition to the line-of-sight (LoS), even if the position of corresponding incidence point (IP) is a priori unknown. Subsequently, we pose a maximum likelihood (ML) estimation problem, to jointly estimate the 3D position and 3D orientation of the UE as well as several nuisance parameters (the UE clock offset and the positions of IPs corresponding to the multipath). The ML problem is a high-dimensional non-convex optimization problem over a product of Euclidean and non-Euclidean manifolds. To avoid complex exhaustive search procedures, we propose a geometric initial estimate of all parameters, which reduces the problem to a 1-dimensional search over a finite interval. Numerical results show the efficiency of the proposed ad-hoc estimation, whose gap to the Cramér-Rao bound (CRB) is tightened using the ML estimation. △ Less

Submitted 1 December, 2022; v1 submitted 11 April, 2022; originally announced April 2022.

Robust Beamforming for Localization-Aided Millimeter Wave Communication Systems

Authors: Junchang Sun, Shuai Ma, Shiyin Li, Ruixin Yang, Minghui Min, Gonzalo Seco-Granados

Abstract: In this letter, we investigate a robust beamforming problem for localization-aided millimeter wave (mmWave) communication systems. To handle this problem, we propose a novel restriction and relaxation (R&R) method. The proposed R&R method aims at minimizing the total transmit power while the positioning error follows a Gaussian distribution. Specifically, in the restriction phase of R&R, the proba… ▽ More In this letter, we investigate a robust beamforming problem for localization-aided millimeter wave (mmWave) communication systems. To handle this problem, we propose a novel restriction and relaxation (R&R) method. The proposed R&R method aims at minimizing the total transmit power while the positioning error follows a Gaussian distribution. Specifically, in the restriction phase of R&R, the probabilistic constraint is transformed into the deterministic form by using the Bernsteintype inequality. In the relaxation phase of R&R, the non-convex optimization problem is reformulated into a convex semidefinite program (SDP) by using semidefinite relaxation (SDR) and firstorder Taylor expansion methods. To the best of our knowledge, we first consider the impact of the distribution of the positioning error on the channel state information (CSI), which further influences the data rate. Numerical results present the trade-off of the beamforming between the communication and positioning. △ Less

Submitted 30 March, 2022; originally announced March 2022.

RIS-Enabled Self-Localization: Leveraging Controllable Reflections With Zero Access Points

Authors: Kamran Keykhosravi, Gonzalo Seco-Granados, George C. Alexandropoulos, Henk Wymeersch

Abstract: Reconfigurable intelligent surfaces (RISs) are one of the most promising technological enablers of the next (6th) generation of wireless systems. In this paper, we introduce a novel use-case of the RIS technology in radio localization, which is enabling the user to estimate its own position via transmitting orthogonal frequency-division multiplexing (OFDM) pilots and processing the signal reflecte… ▽ More Reconfigurable intelligent surfaces (RISs) are one of the most promising technological enablers of the next (6th) generation of wireless systems. In this paper, we introduce a novel use-case of the RIS technology in radio localization, which is enabling the user to estimate its own position via transmitting orthogonal frequency-division multiplexing (OFDM) pilots and processing the signal reflected from the RIS. We demonstrate that user localization in this scenario is possible by deriving Cramer-Rao lower bounds on the positioning error and devising a low-complexity position estimation algorithm. We consider random and directional RIS phase profiles and apply a specific temporal coding to them, such that the reflected signal from the RIS can be separated from the uncontrolled multipath. Finally, we assess the performance of our position estimator for an example system and show that the proposed algorithm can attain the derived bound at high signal-to-noise ratio values. △ Less

Submitted 22 February, 2022; originally announced February 2022.

Comments: Accepted in ICC 2022

Optimal Spatial Signal Design for mmWave Positioning under Imperfect Synchronization

Authors: Musa Furkan Keskin, Fan Jiang, Florent Munier, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We consider the problem of spatial signal design for multipath-assisted mmWave positioning under limited prior knowledge on the user's location and clock bias. We propose an optimal robust design and, based on the low-dimensional precoder structure under perfect prior knowledge, a codebook-based heuristic design with optimized beam power allocation. Through numerical results, we characterize diffe… ▽ More We consider the problem of spatial signal design for multipath-assisted mmWave positioning under limited prior knowledge on the user's location and clock bias. We propose an optimal robust design and, based on the low-dimensional precoder structure under perfect prior knowledge, a codebook-based heuristic design with optimized beam power allocation. Through numerical results, we characterize different position-error-bound (PEB) regimes with respect to clock bias uncertainty and show that the proposed low-complexity codebook-based designs outperform the conventional directional beam codebook and achieve near-optimal PEB performance for both analog and digital architectures. △ Less

Submitted 7 February, 2022; v1 submitted 17 May, 2021; originally announced May 2021.

Semi-Passive 3D Positioning of Multiple RIS-Enabled Users

Authors: Kamran Keykhosravi, Musa Furkan Keskin, Satyam Dwivedi, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: Reconfigurable intelligent surfaces (RISs) are set to be a revolutionary technology in the 6th generation of wireless systems. In this work, we study the application of RIS in a multi-user passive localization scenario, where we have one transmitter (Tx) and multiple asynchronous receivers (Rxs) with known locations. We aim to estimate the locations of multiple users equipped with RISs. The RISs o… ▽ More Reconfigurable intelligent surfaces (RISs) are set to be a revolutionary technology in the 6th generation of wireless systems. In this work, we study the application of RIS in a multi-user passive localization scenario, where we have one transmitter (Tx) and multiple asynchronous receivers (Rxs) with known locations. We aim to estimate the locations of multiple users equipped with RISs. The RISs only reflect the signal from the Tx to the Rxs and are not used as active transceivers themselves. Each Rx receives the signal from the Tx (LOS path) and the reflected signal from the RISs (NLOS path). We show that users' 3D position can be estimated with submeter accuracy in a large area around the transmitter, using the LOS and NLOS time-of-arrival measurements at the Rxs. We do so, by developing the signal model, deriving the Cramer-Rao bounds, and devising an estimator that attains these bounds. Furthermore, by orthogonalizing the RIS phase profiles across different users, we circumvent inter-path interference. △ Less

Submitted 25 April, 2021; originally announced April 2021.

3D Orientation Estimation with Multiple 5G mmWave Base Stations

Authors: Mohammad A. Nazari, Gonzalo Seco-Granados, Pontus Johannisson, Henk Wymeersch

Abstract: We consider the problem of estimating the 3D orientation of a user, using the downlink mmWave signals received from multiple base stations. We show that the received signals from several base stations, having known positions, can be used to estimate the unknown orientation of the user. We formulate the estimation problem as a maximum likelihood estimation problem in the the manifold of rotation ma… ▽ More We consider the problem of estimating the 3D orientation of a user, using the downlink mmWave signals received from multiple base stations. We show that the received signals from several base stations, having known positions, can be used to estimate the unknown orientation of the user. We formulate the estimation problem as a maximum likelihood estimation problem in the the manifold of rotation matrices. In order to provide an initial estimate to solve the non-linear non-convex optimization problem, we resort to a least squares estimation problem that exploits the underlying geometry. Our numerical results show that the problem of orientation estimation can be solved when the signals from at least two base stations are received. We also provide the orientation lower error bound, showing a narrow gap between the performance of the proposed estimators and the bound. △ Less

Submitted 5 January, 2021; originally announced January 2021.

Position Information from Single-Bounce Reflections

Authors: Anastasios Kakkavas, Mario H. Castañeda García, Gonzalo Seco-Granados, Henk Wymeersch, Richard A. Stirling-Gallacher, Josef A. Nossek

Abstract: In the context of positioning a target with a single-anchor, this contribution focuses on the Fisher information about the position, orientation and clock offset of the target provided by single-bounce reflections. The availability of prior knowledge of the target's environment is taken into account via a prior distribution of the position of virtual anchors, and the rank, intensity and direction… ▽ More In the context of positioning a target with a single-anchor, this contribution focuses on the Fisher information about the position, orientation and clock offset of the target provided by single-bounce reflections. The availability of prior knowledge of the target's environment is taken into account via a prior distribution of the position of virtual anchors, and the rank, intensity and direction of provided information is studied. We show that when no prior knowledge is available, single-bounce reflections offer position information in the direction parallel to the reflecting surface, irrespective of the target's and anchor's locations. We provide a geometrically intuitive explanation of the results and present numerical examples demonstrating their potential implications. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Comments: 5 pages, 5 figures, submitted to IEEE Wireless Communications Letters

Power Allocation and Parameter Estimation for Multipath-based 5G Positioning

Authors: Anastasios Kakkavas, Henk Wymeersch, Gonzalo Seco-Granados, Mario H. Castañeda García, Richard A. Stirling-Gallacher, Josef A. Nossek

Abstract: We consider a single-anchor multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system with imperfectly synchronized transmitter (Tx) and receiver (Rx) clocks, where the Rx estimates its position based on the received reference signals. The Tx, having (imperfect) prior knowledge about the Rx location and the surrounding geometry, transmits the reference signals… ▽ More We consider a single-anchor multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) system with imperfectly synchronized transmitter (Tx) and receiver (Rx) clocks, where the Rx estimates its position based on the received reference signals. The Tx, having (imperfect) prior knowledge about the Rx location and the surrounding geometry, transmits the reference signals based on a set of fixed beams. In this work, we develop strategies for the power allocation among the beams aiming to minimize the expected Cramér-Rao lower bound (CRLB) for Rx positioning. Additional constraints on the design are included to ensure that the line-of-sight (LOS) path is detected with high probability. Furthermore, the effect of clock asynchronism on the resulting allocation strategies is also studied. We also propose a gridless compressed sensing-based position estimation algorithm, which exploits the information on the clock offset provided by non-line-of-sight paths, and show that it is asymptotically efficient. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Comments: 30 pages, 6 figures, submitted to IEEE Transactions on Wireless Communications

SISO RIS-Enabled Joint 3D Downlink Localization and Synchronization

Authors: Kamran Keykhosravi, Musa Furkan Keskin, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We consider the problem of joint three-dimensional localization and synchronization for a single-input single-output (SISO) system in the presence of a reconfigurable intelligent surface (RIS), equipped with a uniform planar array. First, we derive the Cramér-Rao bounds (CRBs) on the estimation error of the channel parameters, namely, the angle-of-departure (AOD), composed of azimuth and elevation… ▽ More We consider the problem of joint three-dimensional localization and synchronization for a single-input single-output (SISO) system in the presence of a reconfigurable intelligent surface (RIS), equipped with a uniform planar array. First, we derive the Cramér-Rao bounds (CRBs) on the estimation error of the channel parameters, namely, the angle-of-departure (AOD), composed of azimuth and elevation, from RIS to the user equipment (UE) and times-of-arrival (TOAs) for the path from the base station (BS) to UE and BS-RIS-UE reflection. In order to avoid high-dimensional search over the parameter space, we devise a low-complexity estimation algorithm that performs two 1D searches over the TOAs and one 2D search over the AODs. Simulation results demonstrate that the considered RIS-aided wireless system can provide submeter-level positioning and synchronization accuracy, materializing the positioning capability of Beyond 5G networks even with single-antenna BS and UE. Furthermore, the proposed estimator is shown to attain the CRB at a wide interval of distances between UE and RIS. Finally, we also investigate the scaling of the position error bound with the number of RIS elements. △ Less

Submitted 17 February, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: Submitted to ICC 2021

RIS-aided Joint Localization and Synchronization with a Single-Antenna MmWave Receiver

Authors: Alessio Fascista, Angelo Coluccia, Henk Wymeersch, Gonzalo Seco-Granados

Abstract: MmWave multiple-input single-output (MISO) systems using a single-antenna receiver are regarded as promising solution for the near future, before the full-fledged 5G MIMO will be widespread. However, for MISO systems synchronization cannot be performed jointly with user localization unless two-way transmissions are used. In this paper we show that thanks to the use of a reconfigurable intelligent… ▽ More MmWave multiple-input single-output (MISO) systems using a single-antenna receiver are regarded as promising solution for the near future, before the full-fledged 5G MIMO will be widespread. However, for MISO systems synchronization cannot be performed jointly with user localization unless two-way transmissions are used. In this paper we show that thanks to the use of a reconfigurable intelligent surface (RIS), joint localization and synchronization is possible with only downlink MISO transmissions. The direct maximum likelihood (ML) estimator for the position and clock offset is derived. To obtain a good initialization for the ML optimization, a decoupled, relaxed estimator of position and delays is also devised, which does not require knowledge of the clock offset. Results show that the proposed approach attains the Cramér-Rao lower bound even for moderate values of the system parameters. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Detection of Replay Attacks to GNSS based on Partial Correlations and Authentication Data Unpredictability

Authors: Gonzalo Seco-Granados, David Gomez-Casco, Jose A. Lopez-Salcedo, Ignacio Fernandez-Hernandez

Abstract: Intentional interference, and in particular GNSS spoofing, is currently one of the most significant concerns of the Positioning, Navigation and Timing (PNT) community. With the adoption of Open Service Navigation Message Authentication (OSNMA) in Galileo, the E1B signal component will continuously broadcast unpredictable cryptographic data. This allows GNSS receivers not only to ensure the authent… ▽ More Intentional interference, and in particular GNSS spoofing, is currently one of the most significant concerns of the Positioning, Navigation and Timing (PNT) community. With the adoption of Open Service Navigation Message Authentication (OSNMA) in Galileo, the E1B signal component will continuously broadcast unpredictable cryptographic data. This allows GNSS receivers not only to ensure the authenticity of data origin but also to detect replay spoofing attacks for receivers already tracking real signals with relatively good visibility conditions. Since the spoofer needs to estimate the unpredictable bits introduced by OSNMA with almost zero delay in order to perform a Security Code Estimation and Replay (SCER) attack, the spoofer unavoidably introduces a slight distortion into the signal, which can be the basis of a spoofing detector. In this work, we propose five detectors based on partial correlations of GNSS signals obtained over predictable and unpredictable parts of the signals. We evaluate them in a wide set of test cases, including different types of receiver and spoofing conditions. The results show that one of the detectors is consistently superior to the others, and it is able to detect SCER attacks with a high probability even in favorable conditions for the spoofer. Finally, we discuss some practical considerations for implementing the proposed detector in receivers, in particular when the Galileo OSNMA message structure is used. △ Less

Submitted 6 November, 2020; v1 submitted 23 October, 2020; originally announced October 2020.

Journal ref: GPS Solutions, 2021

Near-field Localization with a Reconfigurable Intelligent Surface Acting as Lens

Authors: Zohair Abu-Shaban, Kamran Keykhosravi, Musa Furkan Keskin, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to… ▽ More Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to reception radio frequency chain. We perform a Fisher information analysis, evaluate the impact of different lens configurations, and propose a two-stage localization algorithm. Our results indicate that positional beamforming can lead to better performance when a priori location information is available, while random beamforming is preferred when a priori information is lacking. Our simulation results for a moderate size lens operating at 28 GHz showcased that decimeter-level accuracy can be attained within 3 meters to the lens. △ Less

Submitted 12 October, 2020; originally announced October 2020.

Downlink Single-Snapshot Localization and Mapping with a Single-Antenna Receiver

Authors: Alessio Fascista, Angelo Coluccia, Henk Wymeersch, Gonzalo Seco-Granados

Abstract: 5G mmWave MIMO systems enable accurate estimation of the user position and mapping of the radio environment using a single snapshot when both the base station (BS) and user are equipped with large antenna arrays. However, massive arrays are initially expected only at the BS side, likely leaving users with one or very few antennas. In this paper, we propose a novel method for single-snapshot locali… ▽ More 5G mmWave MIMO systems enable accurate estimation of the user position and mapping of the radio environment using a single snapshot when both the base station (BS) and user are equipped with large antenna arrays. However, massive arrays are initially expected only at the BS side, likely leaving users with one or very few antennas. In this paper, we propose a novel method for single-snapshot localization and mapping in the more challenging case of a user equipped with a single-antenna receiver. The joint maximum likelihood (ML) estimation problem is formulated and its solution formally derived. To avoid the burden of a full-dimensional search over the space of the unknown parameters, we present a novel practical approach that exploits the sparsity of mmWave channels to compute an approximate joint ML estimate. A thorough analysis, including the derivation of the Cramér-Rao lower bounds, reveals that accurate localization and mapping can be achieved also in a MISO setup even when the direct line-of-sight path between the BS and the user is severely attenuated. △ Less

Submitted 29 July, 2020; originally announced July 2020.

6G White Paper on Localization and Sensing

Authors: Andre Bourdoux, Andre Noll Barreto, Barend van Liempd, Carlos de Lima, Davide Dardari, Didier Belot, Elana-Simona Lohan, Gonzalo Seco-Granados, Hadi Sarieddeen, Henk Wymeersch, Jaakko Suutala, Jani Saloranta, Maxime Guillaud, Minna Isomursu, Mikko Valkama, Muhammad Reza Kahar Aziz, Rafael Berkvens, Tachporn Sanguanpuak, Tommy Svensson, Yang Miao

Abstract: This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principl… ▽ More This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Following the trend initiated in the 5G NR systems, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler and angular resolutions, as well as localization to cm-level degree of accuracy. Moreover, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. 6G will be truly intelligent wireless systems that will not only provide ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency and space. This white paper concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust. Addressing these challenges will undoubtedly require an inter-disciplinary and concerted effort from the research community. △ Less

Submitted 2 June, 2020; originally announced June 2020.

Comments: 38 pages, 12 figures, white paper

Massive MIMO Channel Estimation with Low-Resolution Spatial Sigma-Delta ADCs

Authors: Shilpa Rao, Gonzalo Seco-Granados, Hessam Pirzadeh, Josef A. Nossek, A. Lee Swindlehurst

Abstract: We consider channel estimation for an uplink massive multiple-input multiple-output (MIMO) system where the base station (BS) uses an array with low-resolution (1-2 bit) analog-to-digital converters and a spatial Sigma-Delta ($ΣΔ$) architecture to shape the quantization noise away from users in some angular sector. We develop a linear minimum mean squared error (LMMSE) channel estimator based on t… ▽ More We consider channel estimation for an uplink massive multiple-input multiple-output (MIMO) system where the base station (BS) uses an array with low-resolution (1-2 bit) analog-to-digital converters and a spatial Sigma-Delta ($ΣΔ$) architecture to shape the quantization noise away from users in some angular sector. We develop a linear minimum mean squared error (LMMSE) channel estimator based on the Bussgang decomposition that reformulates the nonlinear quantizer model using an equivalent linear model plus quantization noise. We also analyze the uplink achievable rate with maximal ratio combining (MRC), zero-forcing (ZF), and LMMSE receivers and provide a lower bound for the achievable rate with the MRC receiver. Numerical results show superior channel estimation and sum spectral efficiency performance using the $ΣΔ$ architecture compared to conventional 1- or 2-bit quantized massive MIMO systems. △ Less

Submitted 13 July, 2021; v1 submitted 15 May, 2020; originally announced May 2020.

Comments: Revision

On the Effect of Mutual Coupling in One-Bit Spatial Sigma-Delta Massive MIMO Systems

Authors: Hessam Pirzadeh, Gonzalo Seco-Granados, A. Lee Swindlehurst, Josef A. Nossek

Abstract: The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular sectors or spatial oversampling to shape the quantization noise away from desired directions of arrival. While reducing the antenna spacing alleviates the adverse i… ▽ More The one-bit spatial Sigma-Delta concept has recently been proposed as an approach for achieving low distortion and low power consumption for massive multi-input multi-output systems. The approach exploits users located in known angular sectors or spatial oversampling to shape the quantization noise away from desired directions of arrival. While reducing the antenna spacing alleviates the adverse impact of quantization noise, it can potentially deteriorate the performance of the massive array due to excessive mutual coupling. In this paper, we analyze the impact of mutual coupling on the uplink spectral efficiency of a spatial one-bit Sigma-Delta massive MIMO architecture, and compare the resulting performance degradation to standard one-bit quantization as well as the ideal case with infinite precision. Our simulations show that the one-bit Sigma-Delta array is particularly advantageous in space-constrained scenarios, can still provide significant gains even in the presence of mutual coupling when the antennas are closely spaced. △ Less

Submitted 11 July, 2020; v1 submitted 10 May, 2020; originally announced May 2020.

Comments: Presented in SPAWC 2020

Performance Analysis for Autonomous Vehicle 5G-Assisted Positioning in GNSS-Challenged Environments

Authors: Zohair Abu-Shaban, Gonzalo Seco-Granados, Craig R. Benson, Henk Wymeersch

Abstract: Standalone Global Navigation Satellite Systems (GNSS) are known to provide positioning accuracy of a few meters in open sky conditions. This accuracy can drop significantly when the line-of-sight (LOS) paths to some GNSS satellites are obstructed, e.g., in urban canyons or underground tunnels. To overcome this issue, the general approach is usually to augment GNSS systems with other dedicated subs… ▽ More Standalone Global Navigation Satellite Systems (GNSS) are known to provide positioning accuracy of a few meters in open sky conditions. This accuracy can drop significantly when the line-of-sight (LOS) paths to some GNSS satellites are obstructed, e.g., in urban canyons or underground tunnels. To overcome this issue, the general approach is usually to augment GNSS systems with other dedicated subsystems to help cover the gaps arising from obscured LOS. Positioning in 5G has attracted some attention lately, mainly due to the possibility to provide cm-level accuracy using 5G signals and infrastructure, effectively imposing no additional cost. In this paper, we study the hybridization of GNSS and 5G positioning in terms of achievable position and velocity error bounds. We focus on scenarios where satellite visibility is constrained by the environment geometry, and where the GNSS and 5G positioning systems fail to perform individually or provide a prohibitively large error. △ Less

Submitted 15 April, 2020; originally announced April 2020.

Comments: This paper has been accepted for publications in the proceedings of the IEEE/ION Position Location and Navigation Symposium (PLANS) 2020. Personal use of this material is permitted. However, permission to use this material for any other purposes must be obtained from the IEEE by sending a request to [email protected]

Spectral Efficiency of One-Bit Sigma-Delta Massive MIMO

Authors: Hessam Pirzadeh, Gonzalo Seco-Granados, Shilpa Rao, A. Lee Swindlehurst

Abstract: We examine the uplink spectral efficiency of a massive MIMO base station employing a one-bit Sigma-Delta sampling scheme implemented in the spatial rather than the temporal domain. Using spatial rather than temporal oversampling, and feedback of the quantization error between adjacent antennas, the method shapes the spatial spectrum of the quantization noise away from an angular sector where the s… ▽ More We examine the uplink spectral efficiency of a massive MIMO base station employing a one-bit Sigma-Delta sampling scheme implemented in the spatial rather than the temporal domain. Using spatial rather than temporal oversampling, and feedback of the quantization error between adjacent antennas, the method shapes the spatial spectrum of the quantization noise away from an angular sector where the signals of interest are assumed to lie. It is shown that, while a direct Bussgang analysis of the Sigma-Delta approach is not suitable, an alternative equivalent linear model can be formulated to facilitate an analysis of the system performance. The theoretical properties of the spatial quantization noise power spectrum are derived for the Sigma-Delta array, as well as an expression for the spectral efficiency of maximum ratio combining (MRC). Simulations verify the theoretical results and illustrate the significant performance gains offered by the Sigma-Delta approach for both MRC and zero-forcing receivers. △ Less

Submitted 11 July, 2020; v1 submitted 12 October, 2019; originally announced October 2019.

Comments: Published in IEEE JSAC

Cooperative Localization with Angular Measurements and Posterior Linearization

Authors: Yibo Wu, Bile Peng, Henk Wymeersch, Gonzalo Seco-Granados, Anastasios Kakkavas, Mario H. Castañeda Garcia, Richard A. Stirling-Gallacher

Abstract: The application of cooperative localization in vehicular networks is attractive to improve accuracy and coverage. Conventional distance measurements between vehicles are limited by the need for synchronization and provide no heading information of the vehicle. To address this, we present a cooperative localization algorithm using posterior linearization belief propagation (PLBP) utilizing angle-of… ▽ More The application of cooperative localization in vehicular networks is attractive to improve accuracy and coverage. Conventional distance measurements between vehicles are limited by the need for synchronization and provide no heading information of the vehicle. To address this, we present a cooperative localization algorithm using posterior linearization belief propagation (PLBP) utilizing angle-of-arrival (AoA)-only measurements. Simulation results show that both directional and positional root mean squared error (RMSE) of vehicles can be decreased significantly and converge to a low value in a few iterations. Furthermore, the influence of parameters for the vehicular network, such as vehicle density, communication radius, prior uncertainty and AoA measurements noise, is analyzed. △ Less

Submitted 10 July, 2019; originally announced July 2019.

Comments: Submitted for possible publication to an IEEE conference

5G Downlink Multi-Beam Signal Design for LOS Positioning

Authors: Anastasios Kakkavas, Gonzalo Seco-Granados, Henk Wymeersch, Mario H. Castañeda García, Richard A. Stirling-Gallacher, Josef A. Nossek

Abstract: In this work, we study optimal transmit strategies for minimizing the positioning error bound in a line-of-sight scenario, under different levels of prior knowledge of the channel parameters. For the case of perfect prior knowledge, we prove that two beams are optimal, and determine their beam directions and optimal power allocation. For the imperfect prior knowledge case, we compute the optimal p… ▽ More In this work, we study optimal transmit strategies for minimizing the positioning error bound in a line-of-sight scenario, under different levels of prior knowledge of the channel parameters. For the case of perfect prior knowledge, we prove that two beams are optimal, and determine their beam directions and optimal power allocation. For the imperfect prior knowledge case, we compute the optimal power allocation among the beams of a codebook for two different robustness-related objectives, namely average or maximum squared position error bound minimization. Our numerical results show that our low-complexity approach can outperform existing methods that entail higher signaling and computational overhead. △ Less

Submitted 2 December, 2020; v1 submitted 4 June, 2019; originally announced June 2019.

Comments: accepted for publication at IEEE GLOBECOM 2019

Journal ref: IEEE Global Communications Conference (GLOBECOM), Waikoloa, HI, USA, 2019, pp. 1-6

5G mmWave Downlink Vehicular Positioning

Authors: Henk Wymeersch, Nil Garcia, Hyowon Kim, Gonzalo Seco-Granados, Sunwoo Kim, Fuxi Wen, Markus Fröhle

Abstract: 5G new radio (NR) provides new opportunities for accurate positioning from a single reference station: large bandwidth combined with multiple antennas, at both the base station and user sides, allows for unparalleled angle and delay resolution. Nevertheless, positioning quality is affected by multipath and clock biases. We study, in terms of performance bounds and algorithms, the ability to locali… ▽ More 5G new radio (NR) provides new opportunities for accurate positioning from a single reference station: large bandwidth combined with multiple antennas, at both the base station and user sides, allows for unparalleled angle and delay resolution. Nevertheless, positioning quality is affected by multipath and clock biases. We study, in terms of performance bounds and algorithms, the ability to localize a vehicle in the presence of multipath and unknown user clock bias. We find that when a sufficient number of paths is present, a vehicle can still be localized thanks to redundancy in the geometric constraints. Moreover, the 5G NR signals enable a vehicle to build up a map of the environment. △ Less

Submitted 7 January, 2019; originally announced January 2019.

Comments: Globecom 2018 paper with corrected figure # 7 (RMSE now significantly higher than CRB)

Millimeter-Wave Downlink Positioning with a Single-Antenna Receiver

Authors: Alessio Fascista, Angelo Coluccia, Henk Wymeersch, Gonzalo Seco-Granados

Abstract: The paper addresses the problem of determining the unknown position of a mobile station for a mmWave MISO system. This setup is motivated by the fact that massive arrays will be initially implemented only on 5G base stations, likely leaving mobile stations with one antenna. The maximum likelihood solution to this problem is devised based on the time of flight and angle of departure of received dow… ▽ More The paper addresses the problem of determining the unknown position of a mobile station for a mmWave MISO system. This setup is motivated by the fact that massive arrays will be initially implemented only on 5G base stations, likely leaving mobile stations with one antenna. The maximum likelihood solution to this problem is devised based on the time of flight and angle of departure of received downlink signals. While positioning in the uplink would rely on angle of arrival, it presents scalability limitations that are avoided in the downlink. To circumvent the multidimensional optimization of the optimal joint estimator, we propose two novel approaches amenable to practical implementation thanks to their reduced complexity. A thorough analysis, which includes the derivation of relevant Cramér-Rao lower bounds, shows that it is possible to achieve quasi-optimal performance even in presence of few transmissions, low SNRs, and multipath propagation effects. △ Less

Submitted 28 November, 2018; originally announced November 2018.

Optimal Post-Detection Integration Technique for the Reacquisition of Weak GNSS Signals

Authors: David Gómez-Casco, José A. López-Salcedo, Gonzalo Seco-Granados

Abstract: This paper tackles the problem of finding the optimal non-coherent detector for the reacquisition of weak Global Navigation Satellite System (GNSS) signals in the presence of bits and phase uncertainty. Two solutions are derived based on using two detection frameworks: the Bayesian approach and the generalized likelihood ratio test (GLRT). We also derive approximate detectors of reduced computatio… ▽ More This paper tackles the problem of finding the optimal non-coherent detector for the reacquisition of weak Global Navigation Satellite System (GNSS) signals in the presence of bits and phase uncertainty. Two solutions are derived based on using two detection frameworks: the Bayesian approach and the generalized likelihood ratio test (GLRT). We also derive approximate detectors of reduced computation complexity and without noticeable performance degradation. Simulation results reveal a clear improvement of the detection probability for the proposed techniques with respect to the conventional detectors implemented in high sensitivity GNSS (HS-GNSS) receivers to acquire weak GNSS signals. Finally, we draw conclusions on which is the best technique to reacquire weak GNSS signals in practice considering a trade-off between performance and complexity. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Comments: 18 pages, 6 figures

Journal ref: IEEE Transactions on Aerospace and Electronic Systems, Volume: 56, Issue: 3, June 2020