-
Collision-Free Multi-Agent Coverage Control for Non-Cooperating Swarms: Preliminary Results
Authors:
Karolina Schmidt,
Luis Rodrigues
Abstract:
The main contribution of this paper is a methodology for multiple non-cooperating swarms of unmanned aerial vehicles to independently cover a common area. In contrast to previous research on coverage control involving more than one swarm, this paper does not assume cooperation between distinct groups but considers them as entirely independent units following their own objectives. Using Voronoi tes…
▽ More
The main contribution of this paper is a methodology for multiple non-cooperating swarms of unmanned aerial vehicles to independently cover a common area. In contrast to previous research on coverage control involving more than one swarm, this paper does not assume cooperation between distinct groups but considers them as entirely independent units following their own objectives. Using Voronoi tesselation, collision-free motion of agents within the same swarm has been proved before. However, as is shown in Example 1 of this paper, in the case of multiple swarms with inter-swarm but without intra-swarm collaboration, these guarantees do not hold. We address this issue by proposing an algorithm to achieve maximum coverage with multiple swarms while avoiding collisions between agents. Thus, the Optimal Reciprocal Collision Avoidance method used for safe navigation in multi-agent scenarios is adapted to suit the needs of Voronoi-based coverage control with more than one swarm. The functionality of the proposed technique is validated through Monte Carlo simulations.
△ Less
Submitted 12 November, 2024;
originally announced November 2024.
-
A Survey of Anomaly Detection in In-Vehicle Networks
Authors:
Övgü Özdemir,
M. Tuğberk İşyapar,
Pınar Karagöz,
Klaus Werner Schmidt,
Demet Demir,
N. Alpay Karagöz
Abstract:
Modern vehicles are equipped with Electronic Control Units (ECU) that are used for controlling important vehicle functions including safety-critical operations. ECUs exchange information via in-vehicle communication buses, of which the Controller Area Network (CAN bus) is by far the most widespread representative. Problems that may occur in the vehicle's physical parts or malicious attacks may cau…
▽ More
Modern vehicles are equipped with Electronic Control Units (ECU) that are used for controlling important vehicle functions including safety-critical operations. ECUs exchange information via in-vehicle communication buses, of which the Controller Area Network (CAN bus) is by far the most widespread representative. Problems that may occur in the vehicle's physical parts or malicious attacks may cause anomalies in the CAN traffic, impairing the correct vehicle operation. Therefore, the detection of such anomalies is vital for vehicle safety. This paper reviews the research on anomaly detection for in-vehicle networks, more specifically for the CAN bus. Our main focus is the evaluation of methods used for CAN bus anomaly detection together with the datasets used in such analysis. To provide the reader with a more comprehensive understanding of the subject, we first give a brief review of related studies on time series-based anomaly detection. Then, we conduct an extensive survey of recent deep learning-based techniques as well as conventional techniques for CAN bus anomaly detection. Our comprehensive analysis delves into anomaly detection algorithms employed in in-vehicle networks, specifically focusing on their learning paradigms, inherent strengths, and weaknesses, as well as their efficacy when applied to CAN bus datasets. Lastly, we highlight challenges and open research problems in CAN bus anomaly detection.
△ Less
Submitted 11 September, 2024;
originally announced September 2024.
-
Fair Evaluation of Federated Learning Algorithms for Automated Breast Density Classification: The Results of the 2022 ACR-NCI-NVIDIA Federated Learning Challenge
Authors:
Kendall Schmidt,
Benjamin Bearce,
Ken Chang,
Laura Coombs,
Keyvan Farahani,
Marawan Elbatele,
Kaouther Mouhebe,
Robert Marti,
Ruipeng Zhang,
Yao Zhang,
Yanfeng Wang,
Yaojun Hu,
Haochao Ying,
Yuyang Xu,
Conrad Testagrose,
Mutlu Demirer,
Vikash Gupta,
Ünal Akünal,
Markus Bujotzek,
Klaus H. Maier-Hein,
Yi Qin,
Xiaomeng Li,
Jayashree Kalpathy-Cramer,
Holger R. Roth
Abstract:
The correct interpretation of breast density is important in the assessment of breast cancer risk. AI has been shown capable of accurately predicting breast density, however, due to the differences in imaging characteristics across mammography systems, models built using data from one system do not generalize well to other systems. Though federated learning (FL) has emerged as a way to improve the…
▽ More
The correct interpretation of breast density is important in the assessment of breast cancer risk. AI has been shown capable of accurately predicting breast density, however, due to the differences in imaging characteristics across mammography systems, models built using data from one system do not generalize well to other systems. Though federated learning (FL) has emerged as a way to improve the generalizability of AI without the need to share data, the best way to preserve features from all training data during FL is an active area of research. To explore FL methodology, the breast density classification FL challenge was hosted in partnership with the American College of Radiology, Harvard Medical School's Mass General Brigham, University of Colorado, NVIDIA, and the National Institutes of Health National Cancer Institute. Challenge participants were able to submit docker containers capable of implementing FL on three simulated medical facilities, each containing a unique large mammography dataset. The breast density FL challenge ran from June 15 to September 5, 2022, attracting seven finalists from around the world. The winning FL submission reached a linear kappa score of 0.653 on the challenge test data and 0.413 on an external testing dataset, scoring comparably to a model trained on the same data in a central location.
△ Less
Submitted 22 May, 2024;
originally announced May 2024.
-
Fuel Saving Effect and Performance of Velocity Control for Modern Combustion-Powered Scooters
Authors:
Jannis Kreß,
Jens Rau,
Hektor Hebert,
Fernando Perez-Peña,
Karsten Schmidt,
Arturo Morgado-Estévez
Abstract:
This paper investigates the performance and fuel-saving effect of a velocity control algorithm on modern 50 cc scooters (Euro 5). The European Parliament has adopted major CO$_2$ emission reductions by 2030. But modern combustion- powered scooters are inefficiently restricted and emit unnecessary amounts of CO$_2$. Replacing the original restriction method with the system presented in this paper,…
▽ More
This paper investigates the performance and fuel-saving effect of a velocity control algorithm on modern 50 cc scooters (Euro 5). The European Parliament has adopted major CO$_2$ emission reductions by 2030. But modern combustion- powered scooters are inefficiently restricted and emit unnecessary amounts of CO$_2$. Replacing the original restriction method with the system presented in this paper, the engine's operating point is being improved significantly. Therefore, a Throttle-by-Wire-System senses the rider's throttle command and manipulates the throttle valve. A redundant wheel speed sensor measures the precise vehicle velocity using the magneto-resistive principle. The entire system is managed by a central ECU, executing the actual velocity control, fail-safe functions, power supply and handling inputs/outputs. For velocity control, an adaptive PI-controller has been simulated, virtually tuned and implemented, limiting the max. velocity regulated by legal constraints (45 km/h). In this way, the environmentally harmful restrictors used today can be bypassed. By implementing a human-machine interface, including a virtual dashboard, the system is capable of interfacing with the rider. For evaluation purposes a measurement box has been developed, logging vehicle orientation, system/control variables and engine parameters. A Peugeot Kisbee 50 4T (Euro 5) is serving as test vehicle. Finally, the system has been evaluated regarding performance and fuel efficiency both through simulation and road testing. Fuel savings of 13.6 % in real-world test scenarios were achieved while maintaining vehicle performance.
△ Less
Submitted 16 November, 2023;
originally announced November 2023.
-
Development of an interface for digital neuromorphic hardware based on an FPGA
Authors:
René Harmann,
Lukas Sohlbach,
Fernando Perez-Peña,
Karsten Schmidt
Abstract:
Exploring and understanding the functioning of the human brain is one of the greatest challenges for current research. Neuromorphic engineering tries to address this challenge by abstracting biological mechanisms and translating them into technology. Via the abstraction process and experiments with the resulting technical system, an attempt is made to obtain information about the biological counte…
▽ More
Exploring and understanding the functioning of the human brain is one of the greatest challenges for current research. Neuromorphic engineering tries to address this challenge by abstracting biological mechanisms and translating them into technology. Via the abstraction process and experiments with the resulting technical system, an attempt is made to obtain information about the biological counterpart. One subsection of Neuromorphic Engineering (NE) are Spiking Neural Networks (SNN), which describe the structures of the human brain more and more closely than Artificial Neural Networks (ANN). Together with their dedicated hardware, SNNs provide a good platform for developing new algorithms for information processing. In the context of these neuromorphic hardware platforms, this paper aims to develop an interface for a digital hardware platform (SPINN-3 Development Board) to enable the use of industrial or conventional sensors and thus create new approaches for experimental research. The basis for this endeavor is a Field Programmable Gate Array (FPGA), which is placed as a gateway between the sensors and the neuromorphic hardware. Overall, the developed system provides a robust solution for a wide variety of investigations related to neuromorphic hardware and SNNs. Furthermore, the solution also offers suitable possibilities to monitor all processes within the system in order to obtain suitable measurements, which can be examined in search of meaningful results.
△ Less
Submitted 17 August, 2023;
originally announced August 2023.
-
Low-Cost Throttle-By-Wire-System Architecture For Two-Wheeler Vehicles
Authors:
Jannis Kreß,
Jens Rau,
Hektor Hebert,
Fernando Perez-Peña,
Karsten Schmidt,
Arturo Morgado-Estévez
Abstract:
This paper investigates the performance of a lowcost Throttle-by-Wire-System (TbWS) for two-wheeler applications. Mopeds/scooters are still restricted environmentally harmful. Throttle-by-Wire-Systems can contribute to environmental protection by replacing conventional restrictors. Its consisting of an anisotropic magnetoresistance (AMR) throttle position sensor and a position controlled stepper m…
▽ More
This paper investigates the performance of a lowcost Throttle-by-Wire-System (TbWS) for two-wheeler applications. Mopeds/scooters are still restricted environmentally harmful. Throttle-by-Wire-Systems can contribute to environmental protection by replacing conventional restrictors. Its consisting of an anisotropic magnetoresistance (AMR) throttle position sensor and a position controlled stepper motor driven throttle valve actuator. The decentralized throttle position sensor is operating contactless and acquires redundant data. Throttle valve actuation is realized through a position controlled stepper motor, sensing its position feedback by Hall effect. Using a PI-controller, the stepper motors position is precisely set. Both units are transceiving data by a CAN bus. Furthermore, fail-safe functions, plausibility checks, calibration algorithms and energy saving modes have been implemented. Both modules have been evaluated by Hardware-in-the-Loop testing in terms of reliability and measuring/positioning performance before the system was integrated into a Peugeot Kisbee 50 4T (Euro 5/injected). Finally, the sensor unit comes with a measurement deviation of less than 0.16% whereas the actuator unit can approach throttle valve positions with a deviation of less than 0.37%. The actuators settling time does not exceed 0.13s while stable, step-loss free and noiseless operation.
△ Less
Submitted 19 September, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
Federated Learning Enables Big Data for Rare Cancer Boundary Detection
Authors:
Sarthak Pati,
Ujjwal Baid,
Brandon Edwards,
Micah Sheller,
Shih-Han Wang,
G Anthony Reina,
Patrick Foley,
Alexey Gruzdev,
Deepthi Karkada,
Christos Davatzikos,
Chiharu Sako,
Satyam Ghodasara,
Michel Bilello,
Suyash Mohan,
Philipp Vollmuth,
Gianluca Brugnara,
Chandrakanth J Preetha,
Felix Sahm,
Klaus Maier-Hein,
Maximilian Zenk,
Martin Bendszus,
Wolfgang Wick,
Evan Calabrese,
Jeffrey Rudie,
Javier Villanueva-Meyer
, et al. (254 additional authors not shown)
Abstract:
Although machine learning (ML) has shown promise in numerous domains, there are concerns about generalizability to out-of-sample data. This is currently addressed by centrally sharing ample, and importantly diverse, data from multiple sites. However, such centralization is challenging to scale (or even not feasible) due to various limitations. Federated ML (FL) provides an alternative to train acc…
▽ More
Although machine learning (ML) has shown promise in numerous domains, there are concerns about generalizability to out-of-sample data. This is currently addressed by centrally sharing ample, and importantly diverse, data from multiple sites. However, such centralization is challenging to scale (or even not feasible) due to various limitations. Federated ML (FL) provides an alternative to train accurate and generalizable ML models, by only sharing numerical model updates. Here we present findings from the largest FL study to-date, involving data from 71 healthcare institutions across 6 continents, to generate an automatic tumor boundary detector for the rare disease of glioblastoma, utilizing the largest dataset of such patients ever used in the literature (25,256 MRI scans from 6,314 patients). We demonstrate a 33% improvement over a publicly trained model to delineate the surgically targetable tumor, and 23% improvement over the tumor's entire extent. We anticipate our study to: 1) enable more studies in healthcare informed by large and diverse data, ensuring meaningful results for rare diseases and underrepresented populations, 2) facilitate further quantitative analyses for glioblastoma via performance optimization of our consensus model for eventual public release, and 3) demonstrate the effectiveness of FL at such scale and task complexity as a paradigm shift for multi-site collaborations, alleviating the need for data sharing.
△ Less
Submitted 25 April, 2022; v1 submitted 22 April, 2022;
originally announced April 2022.
-
Machine learning-based analysis of hyperspectral images for automated sepsis diagnosis
Authors:
Maximilian Dietrich,
Silvia Seidlitz,
Nicholas Schreck,
Manuel Wiesenfarth,
Patrick Godau,
Minu Tizabi,
Jan Sellner,
Sebastian Marx,
Samuel Knödler,
Michael M. Allers,
Leonardo Ayala,
Karsten Schmidt,
Thorsten Brenner,
Alexander Studier-Fischer,
Felix Nickel,
Beat P. Müller-Stich,
Annette Kopp-Schneider,
Markus A. Weigand,
Lena Maier-Hein
Abstract:
Sepsis is a leading cause of mortality and critical illness worldwide. While robust biomarkers for early diagnosis are still missing, recent work indicates that hyperspectral imaging (HSI) has the potential to overcome this bottleneck by monitoring microcirculatory alterations. Automated machine learning-based diagnosis of sepsis based on HSI data, however, has not been explored to date. Given thi…
▽ More
Sepsis is a leading cause of mortality and critical illness worldwide. While robust biomarkers for early diagnosis are still missing, recent work indicates that hyperspectral imaging (HSI) has the potential to overcome this bottleneck by monitoring microcirculatory alterations. Automated machine learning-based diagnosis of sepsis based on HSI data, however, has not been explored to date. Given this gap in the literature, we leveraged an existing data set to (1) investigate whether HSI-based automated diagnosis of sepsis is possible and (2) put forth a list of possible confounders relevant for HSI-based tissue classification. While we were able to classify sepsis with an accuracy of over $98\,\%$ using the existing data, our research also revealed several subject-, therapy- and imaging-related confounders that may lead to an overestimation of algorithm performance when not balanced across the patient groups. We conclude that further prospective studies, carefully designed with respect to these confounders, are necessary to confirm the preliminary results obtained in this study.
△ Less
Submitted 15 June, 2021;
originally announced June 2021.
-
Brain-Like Object Recognition with High-Performing Shallow Recurrent ANNs
Authors:
Jonas Kubilius,
Martin Schrimpf,
Kohitij Kar,
Ha Hong,
Najib J. Majaj,
Rishi Rajalingham,
Elias B. Issa,
Pouya Bashivan,
Jonathan Prescott-Roy,
Kailyn Schmidt,
Aran Nayebi,
Daniel Bear,
Daniel L. K. Yamins,
James J. DiCarlo
Abstract:
Deep convolutional artificial neural networks (ANNs) are the leading class of candidate models of the mechanisms of visual processing in the primate ventral stream. While initially inspired by brain anatomy, over the past years, these ANNs have evolved from a simple eight-layer architecture in AlexNet to extremely deep and branching architectures, demonstrating increasingly better object categoriz…
▽ More
Deep convolutional artificial neural networks (ANNs) are the leading class of candidate models of the mechanisms of visual processing in the primate ventral stream. While initially inspired by brain anatomy, over the past years, these ANNs have evolved from a simple eight-layer architecture in AlexNet to extremely deep and branching architectures, demonstrating increasingly better object categorization performance, yet bringing into question how brain-like they still are. In particular, typical deep models from the machine learning community are often hard to map onto the brain's anatomy due to their vast number of layers and missing biologically-important connections, such as recurrence. Here we demonstrate that better anatomical alignment to the brain and high performance on machine learning as well as neuroscience measures do not have to be in contradiction. We developed CORnet-S, a shallow ANN with four anatomically mapped areas and recurrent connectivity, guided by Brain-Score, a new large-scale composite of neural and behavioral benchmarks for quantifying the functional fidelity of models of the primate ventral visual stream. Despite being significantly shallower than most models, CORnet-S is the top model on Brain-Score and outperforms similarly compact models on ImageNet. Moreover, our extensive analyses of CORnet-S circuitry variants reveal that recurrence is the main predictive factor of both Brain-Score and ImageNet top-1 performance. Finally, we report that the temporal evolution of the CORnet-S "IT" neural population resembles the actual monkey IT population dynamics. Taken together, these results establish CORnet-S, a compact, recurrent ANN, as the current best model of the primate ventral visual stream.
△ Less
Submitted 28 October, 2019; v1 submitted 13 September, 2019;
originally announced September 2019.
-
Yield Trajectory Tracking for Hyperbolic Age-Structured Population Systems
Authors:
Kevin Schmidt,
Iasson Karafyllis,
Miroslav Krstic
Abstract:
For population systems modeled by age-structured hyperbolic partial differential equations (PDEs) that are bilinear in the input and evolve with a positive-valued infinite-dimensional state, global stabilization of constant yield set points was achieved in prior work. Seasonal demands in biotechnological production processes give rise to time-varying yield references. For the proposed control obje…
▽ More
For population systems modeled by age-structured hyperbolic partial differential equations (PDEs) that are bilinear in the input and evolve with a positive-valued infinite-dimensional state, global stabilization of constant yield set points was achieved in prior work. Seasonal demands in biotechnological production processes give rise to time-varying yield references. For the proposed control objective aiming at a global attractivity of desired yield trajectories, multiple non-standard features have to be considered: a non-local boundary condition, a PDE state restricted to the positive orthant of the function space and arbitrary restrictive but physically meaningful input constraints. Moreover, we provide Control Lyapunov Functionals ensuring an exponentially fast attraction of adequate reference trajectories. To achieve this goal, we make use of the relation between first-order hyperbolic PDEs and integral delay equations leading to a decoupling of the input-dependent dynamics and the infinite-dimensional internal one. Furthermore, the dynamic control structure does not necessitate exact knowledge of the model parameters or online measurements of the age-profile. With a Galerkin-based numerical simulation scheme using the key ideas of the Karhunen-Loève-decomposition, we demonstrate the controller's performance.
△ Less
Submitted 31 March, 2017; v1 submitted 20 January, 2017;
originally announced January 2017.
