-
Benchmarking CFAR and CNN-based Peak Detection Algorithms in ISAC under Hardware Impairments
Authors:
Paolo Tosi,
Steffen Schieler,
Marcus Henninger,
Sebastian Semper,
Silvio Mandelli
Abstract:
Peak detection is a fundamental task in radar and has therefore been studied extensively in radar literature. However, Integrated Sensing and Communication (ISAC) systems for sixth generation (6G) cellular networks need to perform peak detection under hardware impairments and constraints imposed by the underlying system designed for communications. This paper presents a comparative study of classi…
▽ More
Peak detection is a fundamental task in radar and has therefore been studied extensively in radar literature. However, Integrated Sensing and Communication (ISAC) systems for sixth generation (6G) cellular networks need to perform peak detection under hardware impairments and constraints imposed by the underlying system designed for communications. This paper presents a comparative study of classical Constant False Alarm Rate (CFAR)-based algorithms and a recently proposed Convolutional Neural Network (CNN)-based method for peak detection in ISAC radar images. To impose practical constraints of ISAC systems, we model the impact of hardware impairments, such as power amplifier nonlinearities and quantization noise. We perform extensive simulation campaigns focusing on multi-target detection under varying noise as well as on target separation in resolution-limited scenarios. The results show that CFAR detectors require approximate knowledge of the operating scenario and the use of window functions for reliable performance. The CNN, on the other hand, achieves high performance in all scenarios, but requires a preprocessing step for the input data.
△ Less
Submitted 21 May, 2025; v1 submitted 16 May, 2025;
originally announced May 2025.
-
Estimating Multi-Modal Dense Multipath Components using Auto-Encoders
Authors:
Steffen Schieler,
Michael Döbereiner,
Sebastian Semper,
Markus Landmann
Abstract:
We present a maximum-likelihood estimation algorithm for radio channel measurements exhibiting a mixture of independent Dense Multipath Components. The novelty of our approach is in the algorithms initialization using a deep learning architecture. Currently, available approaches can only deal with scenarios where a single mode is present. However, in measurements, two or more modes are often obser…
▽ More
We present a maximum-likelihood estimation algorithm for radio channel measurements exhibiting a mixture of independent Dense Multipath Components. The novelty of our approach is in the algorithms initialization using a deep learning architecture. Currently, available approaches can only deal with scenarios where a single mode is present. However, in measurements, two or more modes are often observed. This much more challenging multi-modal setting bears two important questions: How many modes are there, and how can we estimate those?
To this end, we propose a Neural Net-architecture that can reliably estimate the number of modes present in the data and also provide an initial assessment of their shape. These predictions are used to initialize for gradient- and model-based optimization algorithm to further refine the estimates.
We demonstrate numerically how the presented architecture performs on measurement data and analytically study its influence on the estimation of specular paths in a setting where the single-modal approach fails.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Grid-free Harmonic Retrieval and Model Order Selection using Deep Convolutional Neural Networks
Authors:
Steffen Schieler,
Sebastian Semper,
Reza Faramarzahangari,
Michael Döbereiner,
Christian Schneider,
R. Thomä
Abstract:
Harmonic retrieval techniques are the foundation of radio channel sounding, estimation, and modeling. This paper introduces a Deep Learning approach for joint delay- and Doppler estimation from frequency and time samples of a radio channel transfer function. Our work estimates the two-dimensional parameters from a signal containing an unknown number of paths. Compared to existing deep learning-bas…
▽ More
Harmonic retrieval techniques are the foundation of radio channel sounding, estimation, and modeling. This paper introduces a Deep Learning approach for joint delay- and Doppler estimation from frequency and time samples of a radio channel transfer function. Our work estimates the two-dimensional parameters from a signal containing an unknown number of paths. Compared to existing deep learning-based methods, the signal parameters are not estimated via classification but in a quasi-grid-free manner. This alleviates the bias, spectral leakage, and ghost targets that grid-based approaches produce. The proposed architecture also reliably estimates the number of paths in the measurement. Hence, it jointly solves the model order selection and parameter estimation task. Additionally, we propose a multi-channel windowing of the data to increase the estimator's robustness. We also compare the performance to other harmonic retrieval methods and integrate it into an existing maximum likelihood estimator for efficient initialization of a gradient-based iteration.
△ Less
Submitted 19 December, 2023; v1 submitted 9 November, 2022;
originally announced November 2022.
-
Measurement Testbed for Radar and Emitter Localization of UAV at 3.75 GHz
Authors:
Julia Beuster,
Carsten Andrich,
Michael Döbereiner,
Steffen Schieler,
Maximilian Engelhardt,
Christian Schneider,
Reiner Thomä
Abstract:
This paper presents an experimental measurement platform for the research and development of unmanned aerial vehicles (UAVs) localization algorithms using radio emission and reflectivity. We propose a cost-effective, flexible testbed made from commercial off-the-shelf (COTS) devices to allow academic research regarding the upcoming integration of UAV surveillance in existing mobile radio networks…
▽ More
This paper presents an experimental measurement platform for the research and development of unmanned aerial vehicles (UAVs) localization algorithms using radio emission and reflectivity. We propose a cost-effective, flexible testbed made from commercial off-the-shelf (COTS) devices to allow academic research regarding the upcoming integration of UAV surveillance in existing mobile radio networks in terms of integrated sensing and communication (ISAC). The system enables nanosecond-level synchronization accuracy and centimeter-level positioning accuracy for multiple distributed sensor nodes and a mobile UAV-mounted node. Results from a real-world measurement in a 16 km2 urban area demonstrate the system's performance with both emitter localization as well as with the radar setup.
△ Less
Submitted 26 January, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Cooperative Passive Coherent Location: A Promising 5G Service to Support Road Safety
Authors:
Reiner S. Thomä,
Carsten Andrich,
Giovanni Del Galdo,
Michael Döbereiner,
Matthias A. Hein,
Martin Käske,
Günter Schäfer,
Steffen Schieler,
Christian Schneider,
Andreas Schwind,
Philip Wendland
Abstract:
5G promises many new vertical service areas beyond simple communication and data transfer. We propose CPCL (cooperative passive coherent location), a distributed MIMO radar service, which can be offered by mobile radio network operators as a service for public user groups. CPCL comes as an inherent part of the radio network and takes advantage of the most important key features proposed for 5G. It…
▽ More
5G promises many new vertical service areas beyond simple communication and data transfer. We propose CPCL (cooperative passive coherent location), a distributed MIMO radar service, which can be offered by mobile radio network operators as a service for public user groups. CPCL comes as an inherent part of the radio network and takes advantage of the most important key features proposed for 5G. It extends the well-known idea of passive radar (also known as passive coherent location, PCL) by introducing cooperative principles. These range from cooperative, synchronous radio signaling, and MAC up to radar data fusion on sensor and scenario levels. By using software-defined radio and network paradigms, as well as real-time mobile edge computing facilities intended for 5G, CPCL promises to become a ubiquitous radar service which may be adaptive, reconfigurable, and perhaps cognitive. As CPCL makes double use of radio resources (both in terms of frequency bands and hardware), it can be considered a green technology. Although we introduce the CPCL idea from the viewpoint of vehicle-to-vehicle/infrastructure (V2X) communication, it can definitely also be applied to many other applications in industry, transport, logistics, and for safety and security applications.
△ Less
Submitted 1 October, 2019; v1 submitted 12 February, 2018;
originally announced February 2018.
