-
Very High-Resolution Forest Mapping with TanDEM-X InSAR Data and Self-Supervised Learning
Authors:
José-Luis Bueso-Bello,
Benjamin Chauvel,
Daniel Carcereri,
Philipp Posovszky,
Pietro Milillo,
Jennifer Ruiz,
Juan-Carlos Fernández-Diaz,
Carolina González,
Michele Martone,
Ronny Hänsch,
Paola Rizzoli
Abstract:
Deep learning models have shown encouraging capabilities for mapping accurately forests at medium resolution with TanDEM-X interferometric SAR data. Such models, as most of current state-of-the-art deep learning techniques in remote sensing, are trained in a fully-supervised way, which requires a large amount of labeled data for training and validation. In this work, our aim is to exploit the high…
▽ More
Deep learning models have shown encouraging capabilities for mapping accurately forests at medium resolution with TanDEM-X interferometric SAR data. Such models, as most of current state-of-the-art deep learning techniques in remote sensing, are trained in a fully-supervised way, which requires a large amount of labeled data for training and validation. In this work, our aim is to exploit the high-resolution capabilities of the TanDEM-X mission to map forests at 6 m. The goal is to overcome the intrinsic limitations posed by midresolution products, which affect, e.g., the detection of narrow roads within vegetated areas and the precise delineation of forested regions contours. To cope with the lack of extended reliable reference datasets at such a high resolution, we investigate self-supervised learning techniques for extracting highly informative representations from the input features, followed by a supervised training step with a significantly smaller number of reliable labels. A 1 m resolution forest/non-forest reference map over Pennsylvania, USA, allows for comparing different training approaches for the development of an effective forest mapping framework with limited labeled samples. We select the best-performing approach over this test region and apply it in a real-case forest mapping scenario over the Amazon rainforest, where only very few labeled data at high resolution are available. In this challenging scenario, the proposed self-supervised framework significantly enhances the classification accuracy with respect to fully-supervised methods, trained using the same amount of labeled data, representing an extremely promising starting point for large-scale, very high-resolution forest mapping with TanDEM-X data.
△ Less
Submitted 6 May, 2025;
originally announced May 2025.
-
XLR (piXel Loss Rate): a Lightweight Indicator to Measure Video QoE in IP Networks
Authors:
César Díaz,
Pablo Pérez,
Julián Cabrera,
Jaime Ruiz,
Narciso García
Abstract:
A novel Key Quality Indicator for video delivery applications, XLR (piXel Loss Rate), is defined, characterized, and evaluated. The proposed indicator is an objective measure that captures the effects of transmission errors in the received video, has a good correlation with subjective Mean Opinion Scores, and provides comparable results with state-of-the-art Full-Reference metrics. Moreover, XLR c…
▽ More
A novel Key Quality Indicator for video delivery applications, XLR (piXel Loss Rate), is defined, characterized, and evaluated. The proposed indicator is an objective measure that captures the effects of transmission errors in the received video, has a good correlation with subjective Mean Opinion Scores, and provides comparable results with state-of-the-art Full-Reference metrics. Moreover, XLR can be estimated using only a lightweight analysis on the compressed bitstream, thus allowing a No-Reference operational method. Therefore, XLR can be used for measuring the quality of experience without latency at any network location. Thus, it is a relevant tool for network planning, specially in new high-demanding scenarios. The experiments carried out show the outstanding performance of its linear-dimension score and the reliability of the bitstream-based estimation.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Fully Adaptive Time-Varying Wave-Shape Model: Applications in Biomedical Signal Processing
Authors:
Joaquin Ruiz,
Gastón Schlotthauer,
Leandro Vignolo,
Marcelo A. Colominas
Abstract:
In this work, we propose a time-varying wave-shape extraction algorithm based on a modified version of the adaptive non-harmonic model for non-stationary signals. The model codifies the time-varying wave-shape information in the relative amplitude and phase of the harmonic components of the wave-shape. The algorithm was validated on both real and synthetic signals for the tasks of denoising, decom…
▽ More
In this work, we propose a time-varying wave-shape extraction algorithm based on a modified version of the adaptive non-harmonic model for non-stationary signals. The model codifies the time-varying wave-shape information in the relative amplitude and phase of the harmonic components of the wave-shape. The algorithm was validated on both real and synthetic signals for the tasks of denoising, decomposition and adaptive segmentation. For the denoising task, both monocomponent and multicomponent synthetic signals were considered. In both cases, the proposed algorithm can accurately recover the time-varying wave-shape of non-stationary signals, even in the presence of high levels of noise, outperforming existing wave-shape estimation algorithms and denoising methods based on short-time Fourier transform thresholding. The denoising of an electroencephalograph signal was also performed, giving similar results. For decomposition, our proposal was able to recover the composing waveforms more accurately by considering the time variations from the harmonic amplitude functions when compared to existing methods. Finally, the algorithm was used for the adaptive segmentation of synthetic signals and an electrocardiograph of a patient undergoing ventricular fibrillation.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Wave-shape Function Model Order Estimation by Trigonometric Regression
Authors:
Joaquin Ruiz,
Marcelo A. Colominas
Abstract:
The adaptive non-harmonic (ANH) model is a powerful tool to compactly represent oscillating signals with time-varying amplitude and phase, and non-sinusoidal oscillating morphology. Given good estimators of instantaneous amplitude and phase we can construct an adaptive model, where the morphology of the oscillation is described by the wave-shape function (WSF), a 2π-periodic more general periodic…
▽ More
The adaptive non-harmonic (ANH) model is a powerful tool to compactly represent oscillating signals with time-varying amplitude and phase, and non-sinusoidal oscillating morphology. Given good estimators of instantaneous amplitude and phase we can construct an adaptive model, where the morphology of the oscillation is described by the wave-shape function (WSF), a 2π-periodic more general periodic function. In this paper, we address the problem of estimating the number of harmonic components of the WSF, a problem that remains underresearched, by adapting trigonometric regression model selection criteria into this context. We study the application of these criteria, originally developed in the context of stationary signals, to the case of signals with time-varying amplitudes and phases. We then incorporate the order estimation to the ANH model reconstruction procedure and analyze its performance for noisy AM-FM signals. Experimental results on synthethic signals indicate that these criteria enable the adaptive estimation of the waveform of non-stationary signals with non-sinusoidal oscillatory patterns, even in the presence of considerable amount of noise. We also apply our reconstruction procedure to the task of denoising simulated pulse wave signals and determine that the proposed technique performs competitively to other denoising schemes. We conclude this work by showing that our adaptive order estimation algorithm takes into account the interpatient waveform variability of the electrocardiogram (ECG) and respiratory signals by analyzing recordings from the Fantasia Database.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Enhancing Missing Data Imputation of Non-stationary Signals with Harmonic Decomposition
Authors:
Joaquin Ruiz,
Hau-tieng Wu,
Marcelo A. Colominas
Abstract:
Dealing with time series with missing values, including those afflicted by low quality or over-saturation, presents a significant signal processing challenge. The task of recovering these missing values, known as imputation, has led to the development of several algorithms. However, we have observed that the efficacy of these algorithms tends to diminish when the time series exhibit non-stationary…
▽ More
Dealing with time series with missing values, including those afflicted by low quality or over-saturation, presents a significant signal processing challenge. The task of recovering these missing values, known as imputation, has led to the development of several algorithms. However, we have observed that the efficacy of these algorithms tends to diminish when the time series exhibit non-stationary oscillatory behavior. In this paper, we introduce a novel algorithm, coined Harmonic Level Interpolation (HaLI), which enhances the performance of existing imputation algorithms for oscillatory time series. After running any chosen imputation algorithm, HaLI leverages the harmonic decomposition based on the adaptive nonharmonic model of the initial imputation to improve the imputation accuracy for oscillatory time series. Experimental assessments conducted on synthetic and real signals consistently highlight that HaLI enhances the performance of existing imputation algorithms. The algorithm is made publicly available as a readily employable Matlab code for other researchers to use.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Testing predictive automated driving systems: lessons learned and future recommendations
Authors:
Rubén Izquierdo Gonzalo,
Carlota Salinas Maldonado,
Javier Alonso Ruiz,
Ignacio Parra Alonso,
David Fernández Llorca,
Miguel Á. Sotelo
Abstract:
Conventional vehicles are certified through classical approaches, where different physical certification tests are set up on test tracks to assess required safety levels. These approaches are well suited for vehicles with limited complexity and limited interactions with other entities as last-second resources. However, these approaches do not allow to evaluate safety with real behaviors for critic…
▽ More
Conventional vehicles are certified through classical approaches, where different physical certification tests are set up on test tracks to assess required safety levels. These approaches are well suited for vehicles with limited complexity and limited interactions with other entities as last-second resources. However, these approaches do not allow to evaluate safety with real behaviors for critical and edge cases, nor to evaluate the ability to anticipate them in the mid or long term. This is particularly relevant for automated and autonomous driving functions that make use of advanced predictive systems to anticipate future actions and motions to be considered in the path planning layer. In this paper, we present and analyze the results of physical tests on proving grounds of several predictive systems in automated driving functions developed within the framework of the BRAVE project. Based on our experience in testing predictive automated driving functions, we identify the main limitations of current physical testing approaches when dealing with predictive systems, analyze the main challenges ahead, and provide a set of practical actions and recommendations to consider in future physical testing procedures for automated and autonomous driving functions.
△ Less
Submitted 25 April, 2022;
originally announced May 2022.
-
A free web service for fast COVID-19 classification of chest X-Ray images
Authors:
Jose David Bermudez Castro,
Ricardo Rei,
Jose E. Ruiz,
Pedro Achanccaray Diaz,
Smith Arauco Canchumuni,
Cristian Muñoz Villalobos,
Felipe Borges Coelho,
Leonardo Forero Mendoza,
Marco Aurelio C. Pacheco
Abstract:
The coronavirus outbreak became a major concern for society worldwide. Technological innovation and ingenuity are essential to fight COVID-19 pandemic and bring us one step closer to overcome it. Researchers over the world are working actively to find available alternatives in different fields, such as the Healthcare System, pharmaceutic, health prevention, among others. With the rise of artificia…
▽ More
The coronavirus outbreak became a major concern for society worldwide. Technological innovation and ingenuity are essential to fight COVID-19 pandemic and bring us one step closer to overcome it. Researchers over the world are working actively to find available alternatives in different fields, such as the Healthcare System, pharmaceutic, health prevention, among others. With the rise of artificial intelligence (AI) in the last 10 years, IA-based applications have become the prevalent solution in different areas because of its higher capability, being now adopted to help combat against COVID-19. This work provides a fast detection system of COVID-19 characteristics in X-Ray images based on deep learning (DL) techniques. This system is available as a free web deployed service for fast patient classification, alleviating the high demand for standards method for COVID-19 diagnosis. It is constituted of two deep learning models, one to differentiate between X-Ray and non-X-Ray images based on Mobile-Net architecture, and another one to identify chest X-Ray images with characteristics of COVID-19 based on the DenseNet architecture. For real-time inference, it is provided a pair of dedicated GPUs, which reduce the computational time. The whole system can filter out non-chest X-Ray images, and detect whether the X-Ray presents characteristics of COVID-19, highlighting the most sensitive regions.
△ Less
Submitted 27 August, 2020;
originally announced September 2020.
-
Infinite Factorial Finite State Machine for Blind Multiuser Channel Estimation
Authors:
Francisco J. R. Ruiz,
Isabel Valera,
Lennart Svensson,
Fernando Perez-Cruz
Abstract:
New communication standards need to deal with machine-to-machine communications, in which users may start or stop transmitting at any time in an asynchronous manner. Thus, the number of users is an unknown and time-varying parameter that needs to be accurately estimated in order to properly recover the symbols transmitted by all users in the system. In this paper, we address the problem of joint c…
▽ More
New communication standards need to deal with machine-to-machine communications, in which users may start or stop transmitting at any time in an asynchronous manner. Thus, the number of users is an unknown and time-varying parameter that needs to be accurately estimated in order to properly recover the symbols transmitted by all users in the system. In this paper, we address the problem of joint channel parameter and data estimation in a multiuser communication channel in which the number of transmitters is not known. For that purpose, we develop the infinite factorial finite state machine model, a Bayesian nonparametric model based on the Markov Indian buffet that allows for an unbounded number of transmitters with arbitrary channel length. We propose an inference algorithm that makes use of slice sampling and particle Gibbs with ancestor sampling. Our approach is fully blind as it does not require a prior channel estimation step, prior knowledge of the number of transmitters, or any signaling information. Our experimental results, loosely based on the LTE random access channel, show that the proposed approach can effectively recover the data-generating process for a wide range of scenarios, with varying number of transmitters, number of receivers, constellation order, channel length, and signal-to-noise ratio.
△ Less
Submitted 18 October, 2018;
originally announced October 2018.
