-
Channel Estimation and Hybrid Precoding for Frequency Selective Multiuser mmWave MIMO Systems
Authors:
J. P. González-Coma,
J. Rodríguez-Fernández,
N. González-Prelcic,
L. Castedo,
R. W. Heath
Abstract:
Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the cha…
▽ More
Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations (MSs) on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates, the base station designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: 1) a factorization of the purely digital solution, and 2) an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Broadband Synchronization and Compressive Channel Estimation for Hybrid mmWave MIMO Systems
Authors:
Javier Rodriguez-Fernandez
Abstract:
Synchronization is a fundamental procedure in cellular systems whereby an UE acquires the time and frequency information required to decode the data transmitted by a BS. Due to the necessity of using large antenna arrays to obtain the beamforming gain required to compensate for small antenna aperture, synchronization must be performed either jointly with beam training as in 5G NR, or at the low SN…
▽ More
Synchronization is a fundamental procedure in cellular systems whereby an UE acquires the time and frequency information required to decode the data transmitted by a BS. Due to the necessity of using large antenna arrays to obtain the beamforming gain required to compensate for small antenna aperture, synchronization must be performed either jointly with beam training as in 5G NR, or at the low SNR regime if the high-dimensional mmWave MIMO channel is to be estimated. To circumvent this problem, this work proposes the first synchronization framework for mmWave MIMO that is robust to both TO, CFO, and PN synchronization errors and, unlike prior work, implicitly considers the use of multiple RF chains at both transmitter and receiver. I provide a theoretical analysis of the estimation problem and derive the HCRLB for the estimation of both the CFO, PN, and equivalent beamformed channels seen by the different receive RF chains. I also propose two novel algorithms to estimate the different unknown parameters, which rely on approximating the MMSE estimator for the PN and the ML estimators for both the CFO and the equivalent beamformed channels. Thereafter, I propose to use the estimates for the equivalent beamformed channels to perform compressive estimation of the high-dimensional frequency-selective mmWave MIMO channel and thus undergo data transmission. For performance evaluation, I consider the QuaDRiGa channel simulator, which implements the 5G NR channel model, and show that both compressive channel estimation without prior synchronization is possible, and the proposed approaches outperform current solutions for joint beam training and synchronization currently considered in 5G NR.
△ Less
Submitted 2 May, 2020; v1 submitted 22 April, 2020;
originally announced April 2020.
-
Dictionary Learning for Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems
Authors:
Hongxiang Xie,
Javier Rodríguez-Fernández,
Nuria González-Prelcic
Abstract:
Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutua…
▽ More
Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutual coupling effects, etc. We propose two dictionary learning (DL) algorithms to learn the best sparsifying dictionaries for channel matrices from observations obtained with hybrid frequency-selective mmWave multiple-input-multiple-output (MIMO) systems. First, we optimize the combined dictionary, i.e., the Kronecker product of transmit and receive dictionaries, as it is used in practice to sparsify the channel matrix. Second, considering the different array structures at the transmitter and receiver, we exploit separable DL to find the best transmit and receive dictionaries. Once the channel is expressed in terms of the optimized dictionaries, various CS-based sparse recovery techniques can be applied for low overhead channel estimation. The proposed DL algorithms perform well under low SNR conditions inherent to any mmWave communication systems before the precoders/combiners can be optimized. The effectiveness of the proposed DL algorithms has been corroborated via numerical simulations with different system configurations, array geometries and hardware impairments.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Joint Synchronization, Phase Noise and Compressive Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems
Authors:
Javier Rodriguez-Fernandez,
Nuria Gonzalez-Prelcic
Abstract:
The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume perfect time-frequency synchronization and neglect phase noise, making these approaches impractical. Consequently, achieving time-frequency synchronization between tr…
▽ More
The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume perfect time-frequency synchronization and neglect phase noise, making these approaches impractical. Consequently, achieving time-frequency synchronization between transmitter and receiver and correcting for phase noise (PN) as the channel is estimated, is the greatest challenge yet to be solved in order to configure hybrid precoders and combiners in practical settings. In this paper, building upon our prior work, we find the Maximum A Posteriori (MAP) solution to the joint problem of timing offset (TO), carrier frequency offset (CFO), PN and compressive channel estimation for broadband mmWave MIMO systems with hybrid architectures. Simulation results show that, using significantly less training symbols than in the beam training protocol in the 5G New Radio communications standard, joint synchronization and channel estimation at the low SNR regime can be achieved, and near-optimum data rates can be attained.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Channel Tracking and Hybrid Precoding for Wideband Hybrid Millimeter Wave MIMO Systems
Authors:
Javier Rodriguez-Fernandez,
Nuria Gonzalez-Prelcic,
Takayuki Shimizu
Abstract:
A major source of difficulty when operating with large arrays at mmWave frequencies is to estimate the wideband channel, since the use of hybrid architectures acts as a compression stage for the received signal. Moreover, the channel has to be tracked and the antenna arrays regularly reconfigured to obtain appropriate beamforming gains when a mobile setting is considered. In this paper, we focus o…
▽ More
A major source of difficulty when operating with large arrays at mmWave frequencies is to estimate the wideband channel, since the use of hybrid architectures acts as a compression stage for the received signal. Moreover, the channel has to be tracked and the antenna arrays regularly reconfigured to obtain appropriate beamforming gains when a mobile setting is considered. In this paper, we focus on the problem of channel tracking for frequency-selective mmWave channels, and propose two novel channel tracking algorithms that leverage prior statistical information on the angles-of-arrival and angles-of-departure. Exploiting this prior information, we also propose a precoding and combining design method to increase the received SNR during channel tracking, such that near-optimum data rates can be obtained with low-overhead. In our numerical results, we analyze the performance of our proposed algorithms for different system parameters. Simulation results show that, using channel realizations extracted from the 5G New Radio channel model, our proposed channel tracking framework is able to achieve near-optimum data rates.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
Hybrid precoding and combining for frequency-selective mmWave MIMO Systems with per-antenna power constraints
Authors:
Javier Rodriguez-Fernandez,
Roberto Lopez-Valcarce,
Nuria Gonzalez-Prelcic
Abstract:
Configuring hybrid precoders and combiners is a major challenge to deploy practical mmWave communication systems. Prior work addresses the problem of designing hybrid precoders and combiner, yet focusing on finding solutions under a total transmit power constraint. The design of hybrid precoders and combiners in practical system, is constrained, however, by a per antenna transmit power, since each…
▽ More
Configuring hybrid precoders and combiners is a major challenge to deploy practical mmWave communication systems. Prior work addresses the problem of designing hybrid precoders and combiner, yet focusing on finding solutions under a total transmit power constraint. The design of hybrid precoders and combiners in practical system, is constrained, however, by a per antenna transmit power, since each antenna element in the array is connected to a power amplifier (PA) that has to operate within its linear region. In this paper, we focus on the problem of hybrid precoding and combining with per-antenna power constraints, and under a frequency-selective bandlimited channel model. We first propose an all-digital solution to this problem, and develop a hybrid precoding and combining strategy that aims at matching this solution by minimizing the chordal distance between the all-digital precoders (combiners) and their hybrid approximations. Finally, since minimizing this metric does not guarantee that the final spectral efficiency will be maximized, we optimize the resulting spectral efficiency taking into account the per-antenna power constraints. Simulation results show the effectiveness of our all-digital and hybrid solutions, while emphasizing the differences with respect to the corresponding solution under a total power constraints. As shown in our numerical results, the proposed all-digital solution performs similarly to the case in which a total power constraint is considered. Further, our proposed hybrid solution is also shown to exhibit near-optimum performance, and the influence of different system parameters is also shown, thereby showing the suitability of our proposed framework to deploy practical mmWave MIMO systems.
△ Less
Submitted 1 February, 2019; v1 submitted 6 December, 2018;
originally announced December 2018.
