-
Radar Altimeter Redesign for Multi-Stage Interference Risk Mitigation in 5G and Beyond
Authors:
Jarret Rock,
Ying Wang
Abstract:
The radar altimeter is installed on most 14 CFR Pt 25 category aircraft, which are applicable to passenger travel and represent most airline traffic. The radar altimeter system is highly accurate and reports the height above the terrain. It plays a significant role in the take-off, approach, and landing phases of the applicable aircraft. In critical conditions, including reduced visibility, proxim…
▽ More
The radar altimeter is installed on most 14 CFR Pt 25 category aircraft, which are applicable to passenger travel and represent most airline traffic. The radar altimeter system is highly accurate and reports the height above the terrain. It plays a significant role in the take-off, approach, and landing phases of the applicable aircraft. In critical conditions, including reduced visibility, proximity to terrain, collision avoidance, and autoland procedures, the accuracy of radar altimeters is crucial to the safety of aircraft. This study aims to address the inappropriate behavior of the susceptible system that may cause essential safety concerns with unknown interoperability and operational impacts. We design and verify a strategic approach to mitigate the risks of potential airborne interference to a radar altimeter due to the coexistence of a 5G and future G signal, especially with the growing demand for the Space Air Ground Integrated Network (SAGIN). This study details a design change to a pre-existing radar altimeter system, and the process necessary to gain certification approval following this change is analyzed. We address the certification aspects from a TSO perspective resulting from changes made to a system post-certification. Artifacts, as defined in the FAA Project Specific Certification Plan template, including the Change Impact Analysis, Means of Compliance, and Test Plans, which are mandated by the certification authorities and requested by aircraft manufacturers and operators to ensure a level of compliance during the engineering cycle, have been adhered to.
△ Less
Submitted 9 May, 2023;
originally announced May 2023.
-
Resource-efficient Deep Neural Networks for Automotive Radar Interference Mitigation
Authors:
Johanna Rock,
Wolfgang Roth,
Mate Toth,
Paul Meissner,
Franz Pernkopf
Abstract:
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous vehicles. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Algorithms and models operating on radar data are required to run the early processing steps on specialized radar sensor hardware.…
▽ More
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous vehicles. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Algorithms and models operating on radar data are required to run the early processing steps on specialized radar sensor hardware. This specialized hardware typically has strict resource-constraints, i.e. a low memory capacity and low computational power. Convolutional Neural Network (CNN)-based approaches for denoising and interference mitigation yield promising results for radar processing in terms of performance. Regarding resource-constraints, however, CNNs typically exceed the hardware's capacities by far.
In this paper we investigate quantization techniques for CNN-based denoising and interference mitigation of radar signals. We analyze the quantization of (i) weights and (ii) activations of different CNN-based model architectures. This quantization results in reduced memory requirements for model storage and during inference. We compare models with fixed and learned bit-widths and contrast two different methodologies for training quantized CNNs, i.e. the straight-through gradient estimator and training distributions over discrete weights. We illustrate the importance of structurally small real-valued base models for quantization and show that learned bit-widths yield the smallest models. We achieve a memory reduction of around 80\% compared to the real-valued baseline. Due to practical reasons, however, we recommend the use of 8 bits for weights and activations, which results in models that require only 0.2 megabytes of memory.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Complex-valued Convolutional Neural Networks for Enhanced Radar Signal Denoising and Interference Mitigation
Authors:
Alexander Fuchs,
Johanna Rock,
Mate Toth,
Paul Meissner,
Franz Pernkopf
Abstract:
Autonomous driving highly depends on capable sensors to perceive the environment and to deliver reliable information to the vehicles' control systems. To increase its robustness, a diversified set of sensors is used, including radar sensors. Radar is a vital contribution of sensory information, providing high resolution range as well as velocity measurements. The increased use of radar sensors in…
▽ More
Autonomous driving highly depends on capable sensors to perceive the environment and to deliver reliable information to the vehicles' control systems. To increase its robustness, a diversified set of sensors is used, including radar sensors. Radar is a vital contribution of sensory information, providing high resolution range as well as velocity measurements. The increased use of radar sensors in road traffic introduces new challenges. As the so far unregulated frequency band becomes increasingly crowded, radar sensors suffer from mutual interference between multiple radar sensors. This interference must be mitigated in order to ensure a high and consistent detection sensitivity. In this paper, we propose the use of Complex-Valued Convolutional Neural Networks (CVCNNs) to address the issue of mutual interference between radar sensors. We extend previously developed methods to the complex domain in order to process radar data according to its physical characteristics. This not only increases data efficiency, but also improves the conservation of phase information during filtering, which is crucial for further processing, such as angle estimation. Our experiments show, that the use of CVCNNs increases data efficiency, speeds up network training and substantially improves the conservation of phase information during interference removal.
△ Less
Submitted 29 April, 2021;
originally announced May 2021.
-
Deep Interference Mitigation and Denoising of Real-World FMCW Radar Signals
Authors:
Johanna Rock,
Mate Toth,
Paul Meissner,
Franz Pernkopf
Abstract:
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous cars. Key performance factors are a fine range resolution and the possibility to directly measure velocity. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Sensors must be capable of detec…
▽ More
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous cars. Key performance factors are a fine range resolution and the possibility to directly measure velocity. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Sensors must be capable of detecting, or even mitigating the harmful effects of interference, which include a decreased detection sensitivity. In this paper, we evaluate a Convolutional Neural Network (CNN)-based approach for interference mitigation on real-world radar measurements. We combine real measurements with simulated interference in order to create input-output data suitable for training the model. We analyze the performance to model complexity relation on simulated and measurement data, based on an extensive parameter search. Further, a finite sample size performance comparison shows the effectiveness of the model trained on either simulated or real data as well as for transfer learning. A comparative performance analysis with the state of the art emphasizes the potential of CNN-based models for interference mitigation and denoising of real-world measurements, also considering resource constraints of the hardware.
△ Less
Submitted 4 December, 2020;
originally announced December 2020.
-
Quantized Neural Networks for Radar Interference Mitigation
Authors:
Johanna Rock,
Wolfgang Roth,
Paul Meissner,
Franz Pernkopf
Abstract:
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous vehicles. Key performance factors are weather resistance and the possibility to directly measure velocity. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Algorithms and models operating o…
▽ More
Radar sensors are crucial for environment perception of driver assistance systems as well as autonomous vehicles. Key performance factors are weather resistance and the possibility to directly measure velocity. With a rising number of radar sensors and the so far unregulated automotive radar frequency band, mutual interference is inevitable and must be dealt with. Algorithms and models operating on radar data in early processing stages are required to run directly on specialized hardware, i.e. the radar sensor. This specialized hardware typically has strict resource-constraints, i.e. a low memory capacity and low computational power. Convolutional Neural Network (CNN)-based approaches for denoising and interference mitigation yield promising results for radar processing in terms of performance. However, these models typically contain millions of parameters, stored in hundreds of megabytes of memory, and require additional memory during execution. In this paper we investigate quantization techniques for CNN-based denoising and interference mitigation of radar signals. We analyze the quantization potential of different CNN-based model architectures and sizes by considering (i) quantized weights and (ii) piecewise constant activation functions, which results in reduced memory requirements for model storage and during the inference step respectively.
△ Less
Submitted 1 December, 2020; v1 submitted 25 November, 2020;
originally announced November 2020.
-
Complex Signal Denoising and Interference Mitigation for Automotive Radar Using Convolutional Neural Networks
Authors:
Johanna Rock,
Mate Toth,
Elmar Messner,
Paul Meissner,
Franz Pernkopf
Abstract:
Driver assistance systems as well as autonomous cars have to rely on sensors to perceive their environment. A heterogeneous set of sensors is used to perform this task robustly. Among them, radar sensors are indispensable because of their range resolution and the possibility to directly measure velocity. Since more and more radar sensors are deployed on the streets, mutual interference must be dea…
▽ More
Driver assistance systems as well as autonomous cars have to rely on sensors to perceive their environment. A heterogeneous set of sensors is used to perform this task robustly. Among them, radar sensors are indispensable because of their range resolution and the possibility to directly measure velocity. Since more and more radar sensors are deployed on the streets, mutual interference must be dealt with. In the so far unregulated automotive radar frequency band, a sensor must be capable of detecting, or even mitigating the harmful effects of interference, which include a decreased detection sensitivity. In this paper, we address this issue with Convolutional Neural Networks (CNNs), which are state-of-the-art machine learning tools. We show that the ability of CNNs to find structured information in data while preserving local information enables superior denoising performance. To achieve this, CNN parameters are found using training with simulated data and integrated into the automotive radar signal processing chain. The presented method is compared with the state of the art, highlighting its promising performance. Hence, CNNs can be employed for interference mitigation as an alternative to conventional signal processing methods. Code and pre-trained models are available at https://github.com/johanna-rock/imRICnn.
△ Less
Submitted 25 June, 2019; v1 submitted 24 June, 2019;
originally announced June 2019.
