-
Equivalence between State-Space Stability Analysis and Generalized Nyquist Criterion with Frequency Dynamics Included
Authors:
Pablo Rodriguez-Ortega,
Javier Roldan-Perez,
Milan Prodanovic
Abstract:
Stability of power electronic converters connected to power grids is commonly assessed by using the impedance criterion. On the contrary, stability of power grids is typically analysed by using network state-space representation and system eigenvalues. It has been already reported in the literature that the impedance criterion may lead to erroneous results if the dynamics of the grid frequency is…
▽ More
Stability of power electronic converters connected to power grids is commonly assessed by using the impedance criterion. On the contrary, stability of power grids is typically analysed by using network state-space representation and system eigenvalues. It has been already reported in the literature that the impedance criterion may lead to erroneous results if the dynamics of the grid frequency is not taken into consideration. Meanwhile, the eigenvalue analysis is still considered as a reliable method for finding instabilities. However, the equivalence between these two methods (impedance criterion with frequency dynamics included and eigenvalue analysis) has not been thoroughly studied before. In this paper, the impedance method with frequency dynamics included is compared with the conventional eigenvalue analysis for a system fully based on electronic interfaces. Analytical expressions that link both methods are provided, showing that they are identical under certain conditions. Then, both methods are applied to a system based on a grid-forming and a grid-following converter. The results obtained from real-time simulations performed in OPAL-RT are used to validate the theoretical developments and main contributions of this work.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Network-Reconfiguration-Aware Power Oscillation Damping Controller for Newly Commissioned Converter-Interfaced Power Plants
Authors:
Njegos Jankovic,
Javier Roldan-Perez,
Milan Prodanovic,
Jon Are Suul,
Salvatore D'Arco,
Luis Rouco-Rodriguez
Abstract:
In recent years, transmission system operators have started requesting converter-interfaced generators (CIGs) to participate in grid services such as power oscillation damping (POD). As power systems are prone to topology changes because of connection and disconnection of generators and electrical lines, one of the most important requirements in the POD controller design is to account for these ch…
▽ More
In recent years, transmission system operators have started requesting converter-interfaced generators (CIGs) to participate in grid services such as power oscillation damping (POD). As power systems are prone to topology changes because of connection and disconnection of generators and electrical lines, one of the most important requirements in the POD controller design is to account for these changes and to deal with them by using either adaptive or robust approaches. The robust approach is usually preferred by system operators because of the fixed structure of the controller. In this paper, a procedure to design POD controllers for CIG-based power plants that takes into consideration all possible network configurations is presented. This procedure is based on frequency-response techniques, so it is suitable for the commissioning in newly installed power plants, even in those cases when a detailed small-signal model of the system is not available. This procedure can be used to damp critical system modes by using active power, reactive power, or both power components simultaneously. The proposed procedure is applied to the design of the POD controller for a CIG-based power plant connected to the IEEE 39 Bus system. Simulations performed in Matlab and SimPowerSystems are used to validate the proposed design procedure.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Centralised Multimode Power Oscillation Damping Controller for Photovoltaic Plants with Communication Delay Compensation
Authors:
Njegos Jankovic,
Javier Roldan-Perez,
Milan Prodanovic,
Luis Rouco
Abstract:
Low-frequency oscillations are an inherent phenomena in transmission networks and renewable energy plants should be configured to damp them. Commonly, a centralised controller is used in PV plants to coordinate PV generators via communication channels. However, the communication systems of PV plants introduce delays of a stochastic nature that degrade the performance of centralised control algorit…
▽ More
Low-frequency oscillations are an inherent phenomena in transmission networks and renewable energy plants should be configured to damp them. Commonly, a centralised controller is used in PV plants to coordinate PV generators via communication channels. However, the communication systems of PV plants introduce delays of a stochastic nature that degrade the performance of centralised control algorithms. Therefore, controllers for oscillation damping may not operate correctly unless the communication channel characteristics are not considered and compensated. In this paper, a centralised controller is proposed for the oscillation damping that uses a PV plant with all the realistic effects of communication channels taken into consideration. The communication channels are modelled based on measurements taken in a laboratory environment. The controller is designed to damp several modes of oscillation by using the open-loop phase shift compensation. Theoretical developments were validated in a laboratory using four converters acting as two PV inverters, a battery and a STATCOM. A real-time processing platform was used to implement the centralised controller and to deploy the communication infrastructure. Experimental results show the communication channels impose severe restrictions on the performance of centralised POD controllers, highlighting the importance of their accurate modelling and consideration during the controller design stage.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Recursive Secondary Controller for Voltage Profile Improvement Based on Primary Virtual Admittance Control
Authors:
Dionysios Moutevelis,
Javier Roldan-Perez,
Njegos Jankovic,
Milan Prodanovic
Abstract:
This paper proposes a recursive, virtual admittance based, secondary controller for DG units that improves the voltage profile in distribution networks. First, the adaptation of the virtual admittance concept for the goal of voltage regulation is explained. Then, a recursive secondary controller is developed to periodically update the virtual admittance gains. The controller is formulated as an op…
▽ More
This paper proposes a recursive, virtual admittance based, secondary controller for DG units that improves the voltage profile in distribution networks. First, the adaptation of the virtual admittance concept for the goal of voltage regulation is explained. Then, a recursive secondary controller is developed to periodically update the virtual admittance gains. The controller is formulated as an optimization problem with current and stability limitations as constraints. Measurements across the grid, transmitted through low-bandwidth communications, are used to simplify the calculations, resulting in a recursive algorithm. Weight vectors are included in the objective function to allow participation flexibility of each converter. Results show that the primary virtual admittance controller is able to mitigate over- and under-voltages in steady state and under transient conditions. Subsequently, the secondary controller is shown to further improve the voltage profiles across the grid. Experimental results obtained from a laboratory environment, comprising three DG units and a grid emulator, validate the functionality of the complete control structure.
△ Less
Submitted 5 April, 2023; v1 submitted 26 October, 2022;
originally announced October 2022.
-
Taxonomy of Power Converter Control Schemes based on the Complex Frequency Concept
Authors:
Dionysios Moutevelis,
Javier Roldan-Perez,
Milan Prodanovic,
Federico Milano
Abstract:
This paper proposes a taxonomy of power converter control schemes based on the recently proposed concept of complex frequency. This quantity captures local frequency variations due to the change of both the phase angle and amplitude of bus voltages and current injections. The paper derives the analytical expressions of the link between complex power variations and complex frequency of each convert…
▽ More
This paper proposes a taxonomy of power converter control schemes based on the recently proposed concept of complex frequency. This quantity captures local frequency variations due to the change of both the phase angle and amplitude of bus voltages and current injections. The paper derives the analytical expressions of the link between complex power variations and complex frequency of each converter controller as well as the identification of critical control parameters. The main contribution of this work is to provide a general framework that allows classifying converters synchronization mechanisms and controllers. This framework also allows comparing converters with synchronous machines. To validate the theoretical results, extensive simulations are performed using a modified version of the WSCC 9-bus system. Examples of how the theoretical formulations of the paper can be used to improve power converter control in power system applications are showcased.
△ Less
Submitted 15 April, 2023; v1 submitted 22 September, 2022;
originally announced September 2022.
-
A Two-Layer Near-Optimal Strategy for Substation Constraint Management via Home Batteries
Authors:
Igor Melatti,
Federico Mari,
Toni Mancini,
Milan Prodanovic,
Enrico Tronci
Abstract:
Within electrical distribution networks, substation constraints management requires that aggregated power demand from residential users is kept within suitable bounds. Efficiency of substation constraints management can be measured as the reduction of constraints violations w.r.t. unmanaged demand. Home batteries hold the promise of enabling efficient and user-oblivious substation constraints mana…
▽ More
Within electrical distribution networks, substation constraints management requires that aggregated power demand from residential users is kept within suitable bounds. Efficiency of substation constraints management can be measured as the reduction of constraints violations w.r.t. unmanaged demand. Home batteries hold the promise of enabling efficient and user-oblivious substation constraints management. Centralized control of home batteries would achieve optimal efficiency. However, it is hardly acceptable by users, since service providers (e.g., utilities or aggregators) would directly control batteries at user premises. Unfortunately, devising efficient hierarchical control strategies, thus overcoming the above problem, is far from easy.
We present a novel two-layer control strategy for home batteries that avoids direct control of home devices by the service provider and at the same time yields near-optimal substation constraints management efficiency. Our simulation results on field data from 62 households in Denmark show that the substation constraints management efficiency achieved with our approach is at least 82% of the one obtained with a theoretical optimal centralized strategy.
△ Less
Submitted 15 August, 2021;
originally announced August 2021.
-
Parallel Statistical Model Checking for Safety Verification in Smart Grids
Authors:
T. Mancini,
F. Mari,
I. Melatti,
I. Salvo,
E. Tronci,
J. K. Gruber,
B. Hayes,
M. Prodanovic,
L. Elmegaard
Abstract:
By using small computing devices deployed at user premises, Autonomous Demand Response (ADR) adapts users electricity consumption to given time-dependent electricity tariffs. This allows end-users to save on their electricity bill and Distribution System Operators to optimise (through suitable time-dependent tariffs) management of the electric grid by avoiding demand peaks. Unfortunately, even wit…
▽ More
By using small computing devices deployed at user premises, Autonomous Demand Response (ADR) adapts users electricity consumption to given time-dependent electricity tariffs. This allows end-users to save on their electricity bill and Distribution System Operators to optimise (through suitable time-dependent tariffs) management of the electric grid by avoiding demand peaks. Unfortunately, even with ADR, users power consumption may deviate from the expected (minimum cost) one, e.g., because ADR devices fail to correctly forecast energy needs at user premises. As a result, the aggregated power demand may present undesirable peaks. In this paper we address such a problem by presenting methods and a software tool (APD-Analyser) implementing them, enabling Distribution System Operators to effectively verify that a given time-dependent electricity tariff achieves the desired goals even when end-users deviate from their expected behaviour. We show feasibility of the proposed approach through a realistic scenario from a medium voltage Danish distribution network.
△ Less
Submitted 20 June, 2021;
originally announced June 2021.
-
MudrockNet: Semantic Segmentation of Mudrock SEM Images through Deep Learning
Authors:
Abhishek Bihani,
Hugh Daigle,
Javier E. Santos,
Christopher Landry,
Masa Prodanovic,
Kitty Milliken
Abstract:
Segmentation and analysis of individual pores and grains of mudrocks from scanning electron microscope images is non-trivial because of noise, imaging artifacts, variation in pixel grayscale values across images, and overlaps in grayscale values among different physical features such as silt grains, clay grains, and pores in an image, which make their identification difficult. Moreover, because gr…
▽ More
Segmentation and analysis of individual pores and grains of mudrocks from scanning electron microscope images is non-trivial because of noise, imaging artifacts, variation in pixel grayscale values across images, and overlaps in grayscale values among different physical features such as silt grains, clay grains, and pores in an image, which make their identification difficult. Moreover, because grains and pores often have overlapping grayscale values, direct application of threshold-based segmentation techniques is not sufficient. Recent advances in the field of computer vision have made it easier and faster to segment images and identify multiple occurrences of such features in an image, provided that ground-truth data for training the algorithm is available. Here, we propose a deep learning SEM image segmentation model, MudrockNet based on Google's DeepLab-v3+ architecture implemented with the TensorFlow library. The ground-truth data was obtained from an image-processing workflow applied to scanning electron microscope images of uncemented muds from the Kumano Basin offshore Japan at depths < 1.1 km. The trained deep learning model obtained a pixel-accuracy about 90%, and predictions for the test data obtained a mean intersection over union (IoU) of 0.6591 for silt grains and 0.6642 for pores. We also compared our model with the random forest classifier using trainable Weka segmentation in ImageJ, and it was observed that MudrockNet gave better predictions for both silt grains and pores. The size, concentration, and spatial arrangement of the silt and clay grains can affect the petrophysical properties of a mudrock, and an automated method to accurately identify the different grains and pores in mudrocks can help improve reservoir and seal characterization for petroleum exploration and anthropogenic waste sequestration.
△ Less
Submitted 5 February, 2021;
originally announced February 2021.
