Showing 1–29 of 29 results for author: Nanzer, J A

Three-Dimensional Millimeter-Wave Imaging Using Active Incoherent Fourier Processing and Pulse Compression

Authors: Jorge R. Colon-Berrios, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: We present a novel three-dimensional (3D) imaging approach that combines two-dimensional spatial Fourier-domain imaging techniques with traditional radar pulse compression to recover both cross-range and down-range scene information. The imaging system employs four transmitters, three of which emit spatially and temporally incoherent noise signals, while the fourth transmits a known linear frequen… ▽ More We present a novel three-dimensional (3D) imaging approach that combines two-dimensional spatial Fourier-domain imaging techniques with traditional radar pulse compression to recover both cross-range and down-range scene information. The imaging system employs four transmitters, three of which emit spatially and temporally incoherent noise signals, while the fourth transmits a known linear frequency modulated (LFM) pulsed signal. The spatial incoherence of the noise signals enables sampling of the 2D spatial Fourier spectrum of the scene from which two-dimensional cross-range (azimuth and elevation) images can be formed via interferometric processing. Simultaneously, the LFM signal enables high-resolution downrange imaging through matched filtering. The received signals consist of a superposition of the noise sources and the known pulse allowing for joint recovery of all three dimensions. We describe the system architecture and waveform design, and demonstrate the imaging technique using both simulations with a linear array and experimental data from a 38 GHz active incoherent millimeter-wave imaging system with 23-element randomized array. Results show the reconstruction of targets in three dimensions. △ Less

Submitted 9 July, 2025; originally announced July 2025.

Collaborative Beamforming for Communication Applications Using a Two-Element Fully-Wireless Open-Loop Coherent Distributed Array

Authors: Jason M. Merlo, Jeffrey A. Nanzer

Abstract: In this work we demonstrate a proof of concept of a fully-wireless two-node open-loop coherent distributed communication system and evaluate its performance by transmitting QPSK , 64-, and 256-QAM constellations at a symbol rate of 2 MBd over a 58 m link in an urban environment. The system is implemented in a distributed manner with on-node processing using software-defined radios (SDRs) and wirel… ▽ More In this work we demonstrate a proof of concept of a fully-wireless two-node open-loop coherent distributed communication system and evaluate its performance by transmitting QPSK , 64-, and 256-QAM constellations at a symbol rate of 2 MBd over a 58 m link in an urban environment. The system is implemented in a distributed manner with on-node processing using software-defined radios (SDRs) and wireless internode communication to share coordination information and does not rely on external time or frequency references such as the global navigation satellite system (GNSS). In each experiment ~100 messages were transmitted and a mean coherent gain of 0.936 was achieved across all measurements with a mean symbol error ratio of below $1.4\times 10^{-4}$ achieved up to 64-QAM, demonstrating a reliable bandwidth of up to 12 Mbps. △ Less

Submitted 15 June, 2025; originally announced June 2025.

A Compact Dynamic Antenna for Physical Layer Wireless Security

Authors: Sheng Huang, Jacob R. Randall, Cory Hilton, Jeffrey A. Nanzer

Abstract: We propose a novel omnidirectional antenna design incorporating directional modulation for secure narrow planar information transmission. The proposed antenna features a compact size and stable omnidirectional radiation performance by employing two tightly spaced, printed meander line monopole antennas, acting as a single radiating element. To achieve a narrow information secure region, the propos… ▽ More We propose a novel omnidirectional antenna design incorporating directional modulation for secure narrow planar information transmission. The proposed antenna features a compact size and stable omnidirectional radiation performance by employing two tightly spaced, printed meander line monopole antennas, acting as a single radiating element. To achieve a narrow information secure region, the proposed antenna is fed by differential power excitation of two ports with real-time dynamic switching. This leads to phase pattern modulation only along the electrical polarization, resulting in directionally confined information recoverable region in the E-plane, while maintaining highly constant or static omnidirectional H-plane pattern, inducing a $360^\circ$ information recoverable region. The dynamic antenna is designed and fabricated on a single layer of Rogers RO4350B which provides a miniaturized planar size of $0.36 \times 0.5 , λ_0^2$ at 2.7 GHz and easy integration. To validate the wireless communication performance, the fabricated antenna is directly fed with a 10 dB power ratio by a radio frequency (RF) switching system and evaluated for 16-QAM and 256-QAM transmission in a high signal-to-noise ratio (SNR) environment. Experimental results demonstrate that for 16-QAM transmission, a narrow E-plane information beam (IB) of approximately $34^\circ$ and omnidirectional H-plane IB are obtained, and a narrower E-plane IB is achieved around $15^\circ$ for 256-QAM. These results confirm that the proposed antenna offers a simple yet effective approach to enhance planar physical information security with a compact dynamic antenna system. △ Less

Submitted 9 September, 2025; v1 submitted 12 June, 2025; originally announced June 2025.

Comments: This work has been submitted to the IEEE Antennas and Wireless Propagation Letters for possible publication

Real-Time High-Accuracy Digital Wireless Time, Frequency, and Phase Calibration For Coherent Distributed Antenna Arrays

Authors: Jason M. Merlo, Samuel Wagner, John Lancaster, Jeffrey A. Nanzer

Abstract: This work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase coherence of spatially separated commercial off-the-shelf (COTS) software-defined radios (SDRs) without cables or external references such as global navigation satel… ▽ More This work presents a fully-digital high-accuracy real-time calibration procedure for frequency and time alignment of open-loop wirelessly coordinated coherent distributed antenna array (CDA) modems, enabling radio frequency (RF) phase coherence of spatially separated commercial off-the-shelf (COTS) software-defined radios (SDRs) without cables or external references such as global navigation satellite system (GNSS). Building on previous work using high-accuracy spectrally-sparse time of arrival (ToA) waveforms and a multi-step ToA refinement process, a high-accuracy two-way time transfer (TWTT)-based timefrequency coordination approach is demonstrated. Due to the two-way nature of the high-accuracy TWTT approach, the time and frequency estimates are Doppler and multi-path tolerant, so long as the channel is reciprocal over the synchronization epoch. This technique is experimentally verified using COTS SDRs in a lab environment in static and dynamic scenarios and with significant multipath scatterers. Time, frequency, and phase stability were evaluated by beamforming over coaxial cables to an oscilloscope which achieved time and phase precisions of ~60 ps-70 ps, with median coherent gains above 99 % using optimized coordination parameters, and a beamforming frequency root-mean-square error (RMSE) of 3.73 ppb in a dynamic scenario. Finally, experiments were conducted to compare the performance of this technique with previous works using an analog continuous-wave two-tone (CWTT) frequency reference technique in both static and dynamic settings. △ Less

Submitted 11 July, 2025; v1 submitted 8 June, 2025; originally announced June 2025.

A Compact Narrowband Antenna Design for RF Fingerprinting Applications

Authors: Sheng Huang, Cory Hilton, Steve Bush, Faiz Sherman, Jeffrey A. Nanzer

Abstract: Radio frequency (RF) fingerprinting is widely used for supporting physical layer security in various wireless applications. In this paper, we present the design and implementation of a small antenna with low-cost fabrication that can be directly integrated with nonlinear passive devices, forming a passive RF tag providing unique nonlinear signatures for RF fingerprinting. We first propose a miniat… ▽ More Radio frequency (RF) fingerprinting is widely used for supporting physical layer security in various wireless applications. In this paper, we present the design and implementation of a small antenna with low-cost fabrication that can be directly integrated with nonlinear passive devices, forming a passive RF tag providing unique nonlinear signatures for RF fingerprinting. We first propose a miniaturized meander line dipole, achieved by two folded arms on two sides of the substrate. This leads to antenna with a simple feeding structure and compact size, making it ideal for planar integration. Two antennas on Rogers 4350B and ultra-thin flexible Panasonic Felios are fabricated, achieving small size at $0.21 \times 0.06 \times 0.004 λ_0^3$ and $0.14 \times 0.1 \times 0.0008 λ_0^3$ with realized gain of 1.87 dBi and 1.46 dBi. The passive tag consists of the proposed antenna structure and an integrated RF diode, and is further developed on both substrates, aiming to generate inter-modulation products (IMP) due to the nonlinearity of the diode, which can be used for device identification through classification algorithms. We investigate the nonlinearity of the designed tags for transmission at 15 dBm using two-tone signals. All tags produce a significant increased power at IMP frequencies at a range of 0.4 m. The tags on Rogers substrate provide around 23 dB IMP power increase and tags on flexible substrate embedded in lossy material provide around 16 dB power increase. These findings confirm that the proposed solution offers a simple passive tag design to support unique nonlinear signatures for RF fingerprinting applications in a simple, low-cost device. △ Less

Submitted 20 May, 2025; originally announced May 2025.

Comments: 8 pages

Distributed Beamforming Using Decentralized Time Synchronization in a Six-Element Array

Authors: Naim Shandi, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: We demonstrate a distributed beamforming and beamsteering from a six-node distributed phased array using fully wireless coordination with decentralized time synchronization. In wireless applications such as distributed beamforming, high-accuracy time synchronization across the array is crucial for high coherent gain. The decentralized time synchronization method employed is based on the average co… ▽ More We demonstrate a distributed beamforming and beamsteering from a six-node distributed phased array using fully wireless coordination with decentralized time synchronization. In wireless applications such as distributed beamforming, high-accuracy time synchronization across the array is crucial for high coherent gain. The decentralized time synchronization method employed is based on the average consensus algorithm and the two-way time transfer method presented in our previous work, which achieved picosecond time synchronization with a cabled frequency reference. The system presented in this paper utilizes a centralized wireless frequency transfer method to achieve wireless frequency syntonization in a fully wireless coordination and a distributed computing system architecture. We experimentally evaluate system performance through beamforming and beamsteering to a receiver 16.3 m away from the six-node non-uniformly distributed antenna array, achieving an average coherent gain of 98% of the ideal gain at a carrier frequency of 1.05 GHz. The average time synchronization accuracy achieved was less than 36 ps. △ Less

Submitted 22 May, 2025; v1 submitted 19 May, 2025; originally announced May 2025.

Comments: "This work has been submitted to the IEEE for possible publication." This paper consists of 13 pages and 14 figures

Additive Frequency Diverse Active Incoherent Millimeter-Wave Imaging

Authors: Jorge R. Colon-Berrios, Jeffrey A. Nanzer

Abstract: We present an approach for improving spatial frequency sampling in active incoherent millimeter-wave (AIM) imaging systems using frequency diversity. AIM imaging relies on active transmission of spatio-temporally incoherent signals to illuminate a scene, from which interferometric Fourier-domain imaging can be implemented using a sparse receiving antenna array. One of the benefits of Fourier domai… ▽ More We present an approach for improving spatial frequency sampling in active incoherent millimeter-wave (AIM) imaging systems using frequency diversity. AIM imaging relies on active transmission of spatio-temporally incoherent signals to illuminate a scene, from which interferometric Fourier-domain imaging can be implemented using a sparse receiving antenna array. One of the benefits of Fourier domain imaging is the sparsity of the receiving array, which can form images with equivalent resolution to traditional filled beamsteering arrays, but with a small fraction of the elements. The hardware reduction afforded by the sparse array often leads to an undersampled Fourier space, where even though image formation is possible, the image reconstruction may be degraded when viewing complex objects. To address this challenge without requiring additional receiver channels, we explore the use of frequency diversity in the illuminating and receiving systems. Fourier domain spatial frequency samples are determined by the electrical spacing and rotation of the receiving elements, thus by changing the frequency the sampled spatial frequencies also change. We implement an additive technique where the spatial frequency samples are summed prior to Fourier transform image formation. Importantly, because the system is active, a consistent signal-to-noise ratio is maintained across all frequencies, which may not be possible in traditional passive Fourier-domain imagers. △ Less

Submitted 11 March, 2025; originally announced March 2025.

A Dipole Antenna with a Dynamic Balun for Wireless Security via Amplitude Based Directional Modulation

Authors: Amer Abu Arisheh, Jeffrey A. Nanzer

Abstract: We present a new approach to secure wireless operations using a simple dipole antenna with a dynamic unbalanced feeding structure. By rapidly switching between two states, a dynamic radiation pattern is generated, resulting in directional modulation. The current distribution on the arms of the dipole antenna are made asymmetric by the balun, which changes the relative phase between the feed curren… ▽ More We present a new approach to secure wireless operations using a simple dipole antenna with a dynamic unbalanced feeding structure. By rapidly switching between two states, a dynamic radiation pattern is generated, resulting in directional modulation. The current distribution on the arms of the dipole antenna are made asymmetric by the balun, which changes the relative phase between the feed currents. By rapidly switching between two mirrored states, the relative phase shift changes sign, causing the current distribution to manifest asymmetrically on the arms of the dipole antenna. The resultant far field radiation pattern is therefore asymmetric in both states, but mirrored between the two states. Rapid switching between the two states results in a far-field pattern that is dynamic in amplitude at all angles except for a narrow region of space, which is referred to as the information beam. The dynamic radiation pattern causes additional modulation on any transmitted or received signals, thereby obscuring the information at all angles outside the information beam. The proposed directional modulation technique is separate from both the antenna and the rest of the wireless system, and can thus be implemented in a black box form in wireless communications or sensing systems. We demonstrate the concept in a 1.86 GHz printed dipole antenna, demonstrating the transmission of 256-QAM signals. △ Less

Submitted 16 December, 2024; originally announced December 2024.

Decentralized Localization of Distributed Antenna Array Elements Using an Evolutionary Algorithm

Authors: Matthew J. Dula, Naim Shandi, Jeffrey A. Nanzer

Abstract: Distributed phased arrays have recently garnered interest in applications such as satellite communications and high-resolution remote sensing. High-performance coherent distributed operations such as distributed beamforming are dependent on the ability to synchronize the spatio-electrical states of the elements in the array to the order of the operational wavelength, so that coherent signal summat… ▽ More Distributed phased arrays have recently garnered interest in applications such as satellite communications and high-resolution remote sensing. High-performance coherent distributed operations such as distributed beamforming are dependent on the ability to synchronize the spatio-electrical states of the elements in the array to the order of the operational wavelength, so that coherent signal summation can be achieved at any arbitrary target destination. In this paper, we address the fundamental challenge of precise distributed array element localization to enable coherent operation, even in complex environments where the array may not be capable of directly estimating all nodal link distances. We employ a two-way time transfer technique to synchronize the nodes of the array and perform internode ranging. We implement the classical multidimensional scaling algorithm to recover a decentralized array geometry from a set of range estimates. We also establish the incomplete set of range estimates as a multivariable non-convex optimization problem, and define the differential evolution algorithm which searches the solution space to complete the set of ranges. We experimentally demonstrate wireless localization using a spectrally-sparse pulsed two-tone waveform with 40 MHz tone separation in a laboratory environment, achieving a mean localization error vector magnitude of 0.82 mm in an environment with an average link SNR of 34 dB, theoretically supporting distributed beamforming operation up to 24.3 GHz. △ Less

Submitted 16 November, 2024; originally announced November 2024.

Comments: 11 pages, 10 figures. This work has been submitted to the IEEE for possible publication

Wireless Picosecond Time Synchronization for Distributed Antenna Arrays with Dynamic Connectivity

Authors: Naim Shandi, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: Phase, time, and frequency coordination are crucial for the coherent operation of distributed antenna arrays. This paper demonstrates a high accuracy decentralized time synchronization method for arrays with dynamic connectivity. To overcome challenges such as alteration in network topology, system scaling, and single- or multiple-node failures, we present a decentralized time synchronization meth… ▽ More Phase, time, and frequency coordination are crucial for the coherent operation of distributed antenna arrays. This paper demonstrates a high accuracy decentralized time synchronization method for arrays with dynamic connectivity. To overcome challenges such as alteration in network topology, system scaling, and single- or multiple-node failures, we present a decentralized time synchronization method implementing the average consensus algorithm and two-way time transfer. Our approach supports decentralized time synchronization with picosecond accuracy ($< 13$ ps), unbiased convergence, resilience to node failures, and robustness to other network connection adversities. A time synchronization precision of under 3 ps was achieved for a fully connected frequency syntonized network. The algorithm ensured convergence in time even for a network with only one link connecting two randomly chosen nodes at each iteration; however, the speed of convergence decreased along with the number of connected links. The method is exhibited for a six-node distributed array, by both simulation and experimental implementation using software defined radios. △ Less

Submitted 22 October, 2024; originally announced October 2024.

Comments: 5 pages, and six figures, This work has been submitted to the IEEE for possible publication

Multi-Objective Distributed Beamforming Using High-Accuracy Synchronization and Localization

Authors: Ahona Bhattacharyya, Jeffrey A. Nanzer

Abstract: We present a multi-node, multi-objective open-loop microwave distributed beamforming system based on high-accuracy wireless synchronization and localization. Distributed beamforming requires accurate coordination of the spatial and electrical states of the individual elements within the array to achieve and maintain coherent beamforming at intended destinations. Of the basic coordination aspects,… ▽ More We present a multi-node, multi-objective open-loop microwave distributed beamforming system based on high-accuracy wireless synchronization and localization. Distributed beamforming requires accurate coordination of the spatial and electrical states of the individual elements within the array to achieve and maintain coherent beamforming at intended destinations. Of the basic coordination aspects, time synchronization and localization of the elements are among the most critical to support beamforming of modulated waveforms to destinations in both the near-field and far-field of the array. In this work, we demonstrate multi-objective distributed beamforming from a three-node distributed phased array consisting of software-defined radios that leverages high-accuracy wireless time coordination for both time synchronization and two-dimensional localization of the elements. We use a spectrally-sparse two-tone waveform for high-accuracy inter-node range estimation combined with a linear-frequency modulated waveform to mitigate multipath interference. Localization is performed in a centralized format, where one node is designated as the origin and the remaining nodes build the array geometry relative to the origin, from which we obtain localization accuracy of less than 1 cm. We implement a near-field multi-objective beamformer based on the location estimates, which enables the simultaneous steering of a beam and a null to two receiving antennas. Multi-objective beamforming of pulsed waveforms at a carrier frequency of 2.1 GHz is demonstrated in cases where one of the nodes in the distributed antenna array is moved, and where the targets (the two receiving antennas) are moved. △ Less

Submitted 22 July, 2024; originally announced July 2024.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may may no longer be accessible

Imageless Contraband Detection Using a Millimeter-Wave Dynamic Antenna Array via Spatial Fourier Domain Sampling

Authors: Daniel Chen, Anton Schlegel, Jeffrey A. Nanzer

Abstract: We demonstrate an imageless method of concealed contraband detection using a real-time 75 GHz rotationally dynamic antenna array. The array measures information in the two-dimensional Fourier domain and captures a set of samples that is sufficient for detecting concealed objects yet insufficient for generating full image, thereby preserving the privacy of screened subjects. The small set of Fourie… ▽ More We demonstrate an imageless method of concealed contraband detection using a real-time 75 GHz rotationally dynamic antenna array. The array measures information in the two-dimensional Fourier domain and captures a set of samples that is sufficient for detecting concealed objects yet insufficient for generating full image, thereby preserving the privacy of screened subjects. The small set of Fourier samples contains sharp spatial frequency features in the Fourier domain which correspond to sharp edges of man-made objects such as handguns. We evaluate a set of classification methods: threshold-based, K-nearest neighbor, and support vector machine using radial basis function; all operating on arithmetic features directly extracted from the sampled Fourier-domain responses measured by a dynamically rotating millimeter-wave active interferometer. Noise transmitters are used to produce thermal-like radiation from scenes, enabling direct Fourier-domain sampling, while the rotational dynamics circularly sample the two-dimensional Fourier domain, capturing the sharp-edge induced responses. We experimentally demonstrate the detection of concealed metallic gun-shape object beneath clothing on a real person in a laboratory environment and achieved an accuracy and F1-score both at 0.986. The presented technique not only prevents image formation due to efficient Fourier-domain space sub-sampling but also requires only 211 ms from measurement to decision. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: This work has been submitted to the IEEE for possible publication

Decentralized Picosecond Synchronization for Distributed Wireless Systems

Authors: Naim Shandi, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: We demonstrate a wireless, decentralized time-alignment method for distributed antenna arrays and distributed wireless networks that achieves picosecond-level synchronization. Distributed antenna arrays consist of spatially separated antennas that coordinate their functionality at the wavelength level to achieve coherent operations such as distributed beamforming. Accurate time alignment (synchron… ▽ More We demonstrate a wireless, decentralized time-alignment method for distributed antenna arrays and distributed wireless networks that achieves picosecond-level synchronization. Distributed antenna arrays consist of spatially separated antennas that coordinate their functionality at the wavelength level to achieve coherent operations such as distributed beamforming. Accurate time alignment (synchronization) of the local clocks on each node in the array is necessary to support accurate time-delay beamforming of modulated signals. In this work we combine a consensus averaging algorithm and a high-accuracy wireless two-way time transfer method to achieve decentralized time alignment, correcting for the time-varying bias of the clocks in a method that has no central node. Internode time transfer is based on a spectrally-sparse, two-tone signal achieving near-optimal time delay accuracy. We experimentally demonstrate the approach in a wireless four-node software-defined radio system, with various network connectivity graphs. We show that within 20 iterations all the nodes achieve convergence within a bias of less than 12 ps and a standard deviation of less than 3 ps. The performance is evaluated versus the bandwidth of the two-tone waveform, which impacts the synchronization error, and versus the signal-to-noise ratio. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Comments: 13 pages, 23 figures, "This work has been submitted to the IEEE for possible publication."

Journal ref: 10.1109/TCOMM.2024.3480993

Expectation Maximization Aided Modified Weighted Sequential Energy Detector for Distributed Cooperative Spectrum Sensing

Authors: Mohammed Rashid, Jeffrey A. Nanzer

Abstract: Energy detector (ED) is a popular choice for distributed cooperative spectrum sensing because it does not need to be cognizant of the primary user (PU) signal characteristics. However, the conventional ED-based sensing usually requires large number of observed samples per energy statistic, particularly at low signal-to-noise ratios (SNRs), for improved detection capability. This is due to the fact… ▽ More Energy detector (ED) is a popular choice for distributed cooperative spectrum sensing because it does not need to be cognizant of the primary user (PU) signal characteristics. However, the conventional ED-based sensing usually requires large number of observed samples per energy statistic, particularly at low signal-to-noise ratios (SNRs), for improved detection capability. This is due to the fact that it uses the energy only from the present sensing interval for the PU detection. Previous studies have shown that even with fewer observed samples per energy statistics, improved detection capabilities can be achieved by aggregating both present and past ED samples in a test statistic. Thus, a weighted sequential energy detector (WSED) has been proposed, but it is based on aggregating all the collected ED samples over an observation window. For a highly dynamic PU over the consecutive sensing intervals, that involves also combining the outdated samples in the test statistic that do not correspond to the present state of the PU. In this paper, we propose a modified WSED (mWSED) that uses the primary user states information over the window to aggregate only the highly correlated ED samples in its test statistic. In practice, since the PU states are a priori unknown, we also develop a joint expectation-maximization and Viterbi (EM-Viterbi) algorithm based scheme to iteratively estimate the states by using the ED samples collected over the window. The estimated states are then used in mWSED to compute its test statistics, and the algorithm is referred to here as the EM-mWSED algorithm. Simulation results show that EM-mWSED outperforms other schemes and its performance improves by increasing the average number of neighbors per SU in the network, and by increasing the SNR or the number of samples per energy statistic. △ Less

Submitted 20 September, 2024; v1 submitted 28 March, 2024; originally announced March 2024.

High Accuracy Distributed Kalman Filtering for Frequency and Phase Synchronization in Distributed Phased Arrays

Authors: Mohammed Rashid, Jeffrey A. Nanzer

Abstract: Precise frequency and phase synchronization are among the important aspects in a coherent distributed phased array antenna system, and are among the most challenging to achieve for microwave frequencies and above. We propose a high accuracy distributed Kalman filter (HA-DKF) in which the nodes in the array perform consensus averaging on their locally shared measurements, the innovation noise covar… ▽ More Precise frequency and phase synchronization are among the important aspects in a coherent distributed phased array antenna system, and are among the most challenging to achieve for microwave frequencies and above. We propose a high accuracy distributed Kalman filter (HA-DKF) in which the nodes in the array perform consensus averaging on their locally shared measurements, the innovation noise covariances, and the KF-predicted as well as the KF-updated estimates and error covariances, yielding improved electrical state synchronization compared to other works in the literature. We evaluate the algorithm through simulation and show that it converges in fewer iterations and yields better electrical state synchronization than other algorithms. △ Less

Submitted 18 February, 2023; originally announced February 2023.

Journal ref: IEEE Signal Processing Letters, 2023

Motion Classification Based on Harmonic Micro-Doppler Signatures Using a Convolutional Neural Network

Authors: Cory Hilton, Steve Bush, Faiz Sherman, Matt Barker, Aditya Deshpande, Steve Willeke, Jeffrey A. Nanzer

Abstract: We demonstrate the classification of common motions of held objects using the harmonic micro-Doppler signatures scattered from harmonic radio-frequency tags. Harmonic tags capture incident signals and retransmit at harmonic frequencies, making them easier to distinguish from clutter. We characterize the motion of tagged handheld objects via the time-varying frequency shift of the harmonic signals… ▽ More We demonstrate the classification of common motions of held objects using the harmonic micro-Doppler signatures scattered from harmonic radio-frequency tags. Harmonic tags capture incident signals and retransmit at harmonic frequencies, making them easier to distinguish from clutter. We characterize the motion of tagged handheld objects via the time-varying frequency shift of the harmonic signals (harmonic Doppler). With complex micromotions of held objects, the time-frequency response manifests complex micro-Doppler signatures that can be used to classify the motions. We developed narrow-band harmonic tags at 2.4/4.8 GHz that support frequency scalability for multi-tag operation, and a harmonic radar system to transmit a 2.4 GHz continuous-wave signal and receive the scattered 4.8 GHz harmonic signal. Experiments were conducted to mimic four common motions of held objects from 35 subjects in a cluttered indoor environment. A 7-layer convolutional neural network (CNN) multi-label classifier was developed and obtained a real time classification accuracy of 94.24%, with a response time of 2 seconds per sample with a data processing latency of less than 0.5 seconds. △ Less

Submitted 13 January, 2023; originally announced January 2023.

Comments: Pages: 7 Figures: 9 Tables: 1

Design of a Single-Element Dynamic Antenna for Secure Wireless Applications

Authors: Amer Abu Arisheh, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: We introduce a new technique for secure wireless applications using a single dynamic antenna. The dynamic antenna supports a constantly changing current distribution that generates a radiation pattern that is static in a desired direction and dynamic elsewhere, thereby imparting additional modulation on the signal and obscuring information transmitted or received outside of the secure spatial regi… ▽ More We introduce a new technique for secure wireless applications using a single dynamic antenna. The dynamic antenna supports a constantly changing current distribution that generates a radiation pattern that is static in a desired direction and dynamic elsewhere, thereby imparting additional modulation on the signal and obscuring information transmitted or received outside of the secure spatial region. Dynamic currents are supported by a single feed that is switched between separate ports on a single antenna, generating two different radiation patterns. We introduce the theoretical concept by exploring an ideal complex dynamic radiation pattern that remains static in a narrow desired direction and is dynamic elsewhere. The impact on the transmission of information is analyzed, showing that the secure region narrows as the modulation order increases, and design constraints on the spatial width of the secure region as a function of modulation format are determined. We design and analyze a 2.3 GHz two-state dynamic dipole antenna and experimentally demonstrate secure wireless transmission. We show the ability to steer the secure region experimentally, and to maintain high throughput in the secure region while obscuring the information elsewhere. Our approach introduces a novel single-element technique for secure wireless applications that can be used independently from the rest of the wireless system, essentially operating as a $``$black box$"$ for an additional layer of security. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Online Expectation-Maximization Based Frequency and Phase Consensus in Distributed Phased Arrays

Authors: Mohammed Rashid, Jeffrey A. Nanzer

Abstract: Distributed phased arrays are comprised of separate, smaller antenna systems that coordinate with each other to support coherent beamforming towards a destination. However, due to the frequency drift and phase jitter of the oscillators, as well as the frequency and phase estimation errors induced at the nodes, there exists decoherence that degrades the beamforming process. A decentralized frequenc… ▽ More Distributed phased arrays are comprised of separate, smaller antenna systems that coordinate with each other to support coherent beamforming towards a destination. However, due to the frequency drift and phase jitter of the oscillators, as well as the frequency and phase estimation errors induced at the nodes, there exists decoherence that degrades the beamforming process. A decentralized frequency and phase consensus (DFPC) algorithm was proposed in prior work for undirected networks in which the nodes locally share their frequencies and phases with their neighbors to reach synchronization. Kalman filtering (KF) was also integrated with DFPC (KF-DFPC) to lower the total residual phase error upon convergence. Since these DFPC-based algorithms rely on the average consensus protocol, they do not converge for directed networks. In this paper, we propose a push-sum based frequency and phase consensus (PsFPC) algorithm for the directed networks. The residual phase error of PsFPC is theoretically derived as well. Kalman filtering is also integrated with PsFPC and the resulting KF-PsFPC algorithm shows a significant reduction in the residual phase error upon convergence. KF assumes that the model parameters, i.e., the measurement noise and innovation noise covariance matrices, are known. Since they may not be known in practice, we develop an online expectation maximization (EM) based algorithm that iteratively computes the maximum likelihood (ML) estimate of the unknown matrices in an online manner. EM is integrated with KF-PsFPC to propose the EM-KF-PsFPC algorithm. Simulation results are included where the performance of the PsFPC-based algorithms is analyzed for different distributed phased arrays and is compared to other algorithms. △ Less

Submitted 25 July, 2022; v1 submitted 24 July, 2022; originally announced July 2022.

Journal ref: IEEE Transactions on Communications, 2023

Wireless Picosecond Time Synchronization for Distributed Antenna Arrays

Authors: Jason M. Merlo, Serge R. Mghabghab, Jeffrey A. Nanzer

Abstract: Distributed antenna arrays have been proposed for many applications ranging from space-based observatories to automated vehicles. Achieving good performance in distributed antenna systems requires stringent synchronization at the wavelength and information level to ensure that the transmitted signals arrive coherently at the target, or that scattered and received signals can be appropriately proce… ▽ More Distributed antenna arrays have been proposed for many applications ranging from space-based observatories to automated vehicles. Achieving good performance in distributed antenna systems requires stringent synchronization at the wavelength and information level to ensure that the transmitted signals arrive coherently at the target, or that scattered and received signals can be appropriately processed via distributed algorithms. In this paper we address the challenge of high precision time synchronization to align the operations of elements in a distributed antenna array and to overcome time-varying bias between platforms due to oscillator drift. We use a spectrally sparse two-tone waveform, which obtains approximately optimal time estimation accuracy, in a two-way time transfer process. We also describe a technique for determining the true time delay using the ambiguous two-tone matched filter output, and we compare the time synchronization precision of the two-tone waveform with the more common linear frequency modulation (LFM) waveform. We experimentally demonstrate wireless time synchronization using a single pulse 40$\,$MHz two-tone waveform over a 90$\,$cm 5.8$\,$GHz wireless link in a laboratory setting, obtaining a timing precision of 2.26$\,$ps. △ Less

Submitted 22 December, 2022; v1 submitted 16 June, 2022; originally announced June 2022.

A Message Passing Based Average Consensus Algorithm for Decentralized Frequency and Phase Synchronization in Distributed Phased Arrays

Authors: Mohammed Rashid, Jeffrey A. Nanzer

Abstract: We consider the problem of decentralized frequency and phase synchronization in distributed phased arrays via local broadcast of the node electrical states. Frequency and phase synchronization between nodes in a distributed array is necessary to support beamforming, but due to the operational dynamics of the local oscillators of the nodes, the frequencies and phases of their output signals undergo… ▽ More We consider the problem of decentralized frequency and phase synchronization in distributed phased arrays via local broadcast of the node electrical states. Frequency and phase synchronization between nodes in a distributed array is necessary to support beamforming, but due to the operational dynamics of the local oscillators of the nodes, the frequencies and phases of their output signals undergo the random drift and jitter in between the update intervals. Furthermore, frequency and phase estimation errors contribute to the total phase errors, leading to a residual phase error in the array that degrades coherent operation. Recently, a classical decentralized frequency and phase synchronization algorithm based on consensus averaging was proposed with which the standard deviation of the residual phase errors upon convergence was reduced to $10^{-4}$ degrees for internode update intervals of $0.1$ ms, however this was obtained for arrays with at least $400$ nodes and a high connectivity ratio of $0.9$. In this paper, we propose a message passing based average consensus (MPAC) algorithm to improve the synchronization of the electrical states of the nodes in distributed arrays. Simulation results show that the proposed MPAC algorithm significantly reduces the residual phase errors to about $10^{-11}$ degrees, requiring only $20$ moderately connected nodes in an array. Furthermore, MPAC converges faster than the DFPC-based algorithms, particularly for the larger arrays with a moderate connectivity. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Frequency and Phase Synchronization in Distributed Antenna Arrays Based on Consensus Averaging and Kalman Filtering

Authors: Mohammed Rashid, Jeffrey A. Nanzer

Abstract: A decentralized approach for joint frequency and phase synchronization in distributed antenna arrays is presented. The nodes in the array share their frequencies and phases with their neighboring nodes to align these parameters across the array. Our signal model includes the frequency drifts and phase jitters of the local oscillators as well as the frequency and phase estimation errors at the node… ▽ More A decentralized approach for joint frequency and phase synchronization in distributed antenna arrays is presented. The nodes in the array share their frequencies and phases with their neighboring nodes to align these parameters across the array. Our signal model includes the frequency drifts and phase jitters of the local oscillators as well as the frequency and phase estimation errors at the nodes and models them using practical statistics. A decentralized frequency and phase consensus (DFPC) algorithm is proposed which uses an average consensus method in which each node in the array iteratively updates its frequency and phase by computing an average of the frequencies and phases of their neighboring nodes. Simulation results show that upon convergence the DFPC algorithm can align the frequencies and phases of all the nodes up to a residual phase error that is governed by the oscillators and the estimation errors. To reduce this residual phase error and thus improve the synchronization between the nodes, a Kalman filter based decentralized frequency and phase consensus (KF-DFPC) algorithm is presented. The total residual phase error at the convergence of the KF-DFPC and DFPC algorithms is derived theoretically. The synchronization performances of these algorithms are compared to each other in light of this theoretical residual phase error by varying the duration of the signals, connectivity of the nodes, the number of nodes in the array, and signal to noise ratio of the transmitted signals. Simulation results demonstrate that the proposed KF-DFPC algorithm converges in fewer iterations than other algorithms including DFPC. Furthermore, for shorter intervals between local information broadcasts, the KF-DFPC algorithm significantly outperforms the DFPC algorithm in reducing the residual total phase error, irrespective of the signal to noise ratio of the received signals. △ Less

Submitted 20 July, 2022; v1 submitted 21 January, 2022; originally announced January 2022.

Journal ref: in IEEE Transactions on Wireless Communications, 2022

Distortion Mitigation in Millimeter-Wave Interferometric Radar Angular Velocity Estimation Using Signal Response Decomposition

Authors: Eric Klinefelter, Jason M. Merlo, Jeffrey A. Nanzer

Abstract: A new method of distortion mitigation for multitarget interferometric angular velocity estimation in millimeter-wave radar is presented. In general, when multiple targets are present, the response of a correlation interferometer is corrupted by intermodulation distortion, making it difficult to estimate individual target angular velocities. We present a distortion mitigation method that works by d… ▽ More A new method of distortion mitigation for multitarget interferometric angular velocity estimation in millimeter-wave radar is presented. In general, when multiple targets are present, the response of a correlation interferometer is corrupted by intermodulation distortion, making it difficult to estimate individual target angular velocities. We present a distortion mitigation method that works by decomposing the responses at each antenna element into the responses from the individual targets. Data association is performed to match individual target responses at each antenna such that cross-correlation is performed only between associated targets. Thus, the intermodulation distortion (cross-terms) from correlating unlike targets are eliminated, and the result is a frequency response whose individual frequencies are proportional to the angular velocities of the targets. We demonstrate the approach with a custom 40 GHz interferometric radar, a high-accuracy motion capture system which provides ground-truth position measurements, and two robotic platforms. The multitarget experiments consist of three scenarios, designed to represent easy, medium, and difficult cases for the distortion mitigation technique. We show that the reduction in distortion yields angular velocity estimation errors in the three cases of less than $0.008$ rad/s, $0.020$ rad/s, and $0.033$ rad/s for the easy, medium, and hard cases, respectively. △ Less

Submitted 17 December, 2021; originally announced December 2021.

A C-Band Fully Polarimetric Automotive Synthetic Aperture Radar

Authors: Jason Merlo, Jeffrey A. Nanzer

Abstract: Due to the rapid increase in 76 GHz automotive spectrum use in recent years, wireless interference is becoming a legitimate area of concern. However, the recent rise in interest of automated vehicles (AVs) has also spurred new growth and adoption of low frequency vehicle-to-everything (V2X) communications in and around the 5.8 GHz unlicensed bands, opening the possibility for communications spectr… ▽ More Due to the rapid increase in 76 GHz automotive spectrum use in recent years, wireless interference is becoming a legitimate area of concern. However, the recent rise in interest of automated vehicles (AVs) has also spurred new growth and adoption of low frequency vehicle-to-everything (V2X) communications in and around the 5.8 GHz unlicensed bands, opening the possibility for communications spectrum reuse in the form of joint radar-communications (JRC). In this work, we present a low frequency 5.9 GHz side-looking polarimetric synthetic aperture radar (SAR) for automotive use, utilizing a ranging waveform in a common low frequency V2X communications band. A synthetic aperture technique is employed to address the angular resolution concerns commonly associated with radars at lower frequencies. Three side-looking fully polarimetric SAR images in various urban scenes are presented and discussed to highlight the unique opportunities for landmark inference afforded through measurement of co- and cross-polarized scattering. △ Less

Submitted 22 December, 2021; v1 submitted 26 October, 2021; originally announced October 2021.

Three Dimensional Velocity Measurement Using a Dual Axis Millimeter-Wave Interferometric Radar

Authors: Jason Merlo, Eric Klinefelter, Jeffrey A. Nanzer

Abstract: In this work, a method for directly measuring target velocity in three dimensions using a dual axis correlation interferometric radar is presented. Recent advances have shown that the measurement of a target's angular velocity is possible by correlating the signals measured at spatially diverse aperture locations. By utilizing multiple orthogonal baselines and using conventional Doppler velocity m… ▽ More In this work, a method for directly measuring target velocity in three dimensions using a dual axis correlation interferometric radar is presented. Recent advances have shown that the measurement of a target's angular velocity is possible by correlating the signals measured at spatially diverse aperture locations. By utilizing multiple orthogonal baselines and using conventional Doppler velocity methods to obtain radial velocity, a full three-dimensional velocity vector can be obtained using only three receive antennas and a single transmitter, without the need for tracking. A $\text{41.8 GHz}$ dual axis interferometric radar with a $7.26λ$ antenna baseline is presented along with measurements of a target moving parallel to the plane of the radar array, and of a target moving with components of both radial and tangential velocity. These experiments achieved total velocity root-mean-square errors of $\text{41.01 mm}\cdot\text{s}^{-1}$ ($10.5\%$) for a target moving along a plane parallel to the array, and $\text{45.07 mm}\cdot\text{s}^{-1}$ ($13.5\%$) for a target moving with components of radial and tangential motion relative to the array; estimated trajectory angle RMSEs of $10.42^\circ$ and $5.11^\circ$ were achieved for each experiment respectively. △ Less

Submitted 26 October, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

Distributed Radio Frequency Cooperation at the Wavelength Level Using Wireless Phase Synchronization

Authors: Serge R. Mghabghab, Sean M. Ellison, Jeffrey A. Nanzer

Abstract: Coordinating the operations of separate wireless systems at the wavelength level can lead to significant improvements in wireless capabilities. We address a fundamental challenge in distributed radio frequency system cooperation - inter-node phase alignment - which must be accomplished wirelessly, and is particularly challenging when the nodes are in relative motion. We present a solution to this… ▽ More Coordinating the operations of separate wireless systems at the wavelength level can lead to significant improvements in wireless capabilities. We address a fundamental challenge in distributed radio frequency system cooperation - inter-node phase alignment - which must be accomplished wirelessly, and is particularly challenging when the nodes are in relative motion. We present a solution to this problem that is based on a novel combined high-accuracy ranging and frequency transfer technique. Using this approach, we present the design of the first fully wireless distributed system operating at the wavelength level. We demonstrate the system in the first open-loop coherent distributed beamforming experiment. Internode range estimation to support phase alignment was performed using a two-tone stepped frequency waveform with a single pulse, while a two-tone waveform was used for frequency synchronization, where the oscillator of a secondary node was disciplined to the primary node. In this concept, secondary nodes are equipped with an adjunct self-mixing circuit that is able to extract the reference frequency from the captured synchronization waveform. The approach was implemented on a two-node dynamic system using Ettus X310 software-defined radios, with coherent beamforming at 1.5 GHz. We demonstrate distributed beamforming with greater than 90% of the maximum possible coherent gain throughout the displacement of the secondary node over one full cycle of the beamforming frequency. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Adaptive Distributed Transceiver Synchronization Over a 90 Meter Microwave Wireless Link

Authors: Serge R. Mghabghab, Anton Schlegel, Jeffrey A. Nanzer

Abstract: We present an adaptive approach for synchronizing both the phase and frequency of radio-frequency transceivers over long-range wireless links to support distributed antenna array applications. To enable distributed beamforming between separate wireless nodes, the oscillators in the transceivers must operate at the same frequency, and their phases must be appropriately aligned to support phase-cohe… ▽ More We present an adaptive approach for synchronizing both the phase and frequency of radio-frequency transceivers over long-range wireless links to support distributed antenna array applications. To enable distributed beamforming between separate wireless nodes, the oscillators in the transceivers must operate at the same frequency, and their phases must be appropriately aligned to support phase-coherent beamsteering. Based on a spectrally-sparse waveform, a self-mixing circuit, and an adaptive control loop, we present a system capable of synchronizing the RF oscillators in separate transceivers over distances of nearly 100 m. The approach is based on a spectrally-sparse waveform for joint inter-node ranging and frequency transfer. A frequency reference is modulated onto one signal of a two-tone waveform transmitted by the primary node which is demodulated and used to lock the oscillator of the secondary node. The secondary node retransmits the two-tone signal which the primary node uses for a high-accuracy range measurement. From this range, the phase of the two transceivers can be aligned to support beamforming. We furthermore implemented an adaptive phase control approach to support high-accuracy phase coordination in changing environmental conditions. We demonstrate continuous high accuracy links over a 90 m distance in an outdoor environment for durations up to seven days, demonstrating sufficient phase coordination in changing weather conditions to support distributed beamforming at frequencies up to 3 GHz. △ Less

Submitted 10 September, 2020; originally announced September 2020.

Open-Loop Distributed Beamforming Using Scalable High Accuracy Localization

Authors: Sean M. Ellison, Jeffrey A. Nanzer

Abstract: We present a distributed antenna array supporting open-loop distributed beamforming at 1.5 GHz. Based on a scalable, high-accuracy internode ranging technique, we demonstrate open-loop beamforming experiments using three transmitting nodes. To support distributed beamforming without feedback from the destination, the relative positions of the nodes in the distributed array must be known with accur… ▽ More We present a distributed antenna array supporting open-loop distributed beamforming at 1.5 GHz. Based on a scalable, high-accuracy internode ranging technique, we demonstrate open-loop beamforming experiments using three transmitting nodes. To support distributed beamforming without feedback from the destination, the relative positions of the nodes in the distributed array must be known with accuracies below $λ/15$ of the beamforming carrier frequency to ensure that the array maintains at least 90\% coherent beamforming gain at the receive location. For operations in the microwave range, this leads to range estimation accuracies of centimeters or lower. We present a scalable, high-accuracy waveform and new approaches to refine range measurements to significantly improve the estimation accuracy. Using this waveform with a three-node array, we demonstrate high-accuracy ranging simultaneously between multiple nodes, from which phase corrections on two secondary nodes are implemented to maintain beamforming with the primary node, thereby supporting open-loop distributed beamforming. Upon movement of the nodes, the range estimation is used to dynamically update the phase correction, maintaining beamforming as the nodes move. We show the first open-loop distributed beamforming at 1.5 GHz with two-node and three-node arrays, demonstrating the ability to implement and maintain phase-based beamforming without feedback from the destination. △ Less

Submitted 18 August, 2020; originally announced August 2020.

Comments: Submitted to IEEE Transactions on Wireless Communications

Millimeter-Wave Angle Estimation of Multiple Targets Using Space-Time Modulation and Interferometric Antenna Arrays

Authors: Stavros Vakalis, Jeffrey A. Nanzer

Abstract: A new method of angle estimation of multiple targets using a distributed interferometric antenna array and wideband space-time modulation is presented in this work. Interferometric array measurements of angle of arrival are generally ambiguous in the presence of one or more targets. We propose a new method of mitigating ambiguities in interferometric measurements by multiplying the angle pseudo-sp… ▽ More A new method of angle estimation of multiple targets using a distributed interferometric antenna array and wideband space-time modulation is presented in this work. Interferometric array measurements of angle of arrival are generally ambiguous in the presence of one or more targets. We propose a new method of mitigating ambiguities in interferometric measurements by multiplying the angle pseudo-spectra from multiple antenna baselines, resulting in detections at only the angles of the targets. Using a single linear frequency modulated (LFM) transmitter and a receive interferometric array with $N$ elements we show a simple and computationally efficient technique to estimate the angle of up to $\mathcal{O}(N^2)$ targets. We describe the theory behind the technique, present detailed simulations, and an experimental verification using a three-element millimeter-wave measurement system. △ Less

Submitted 1 August, 2020; originally announced August 2020.

Decentralized Frequency Alignment for Collaborative Beamforming in Distributed Phased Arrays

Authors: Hassna Ouassal, Ming Yan, Jeffrey A. Nanzer

Abstract: A new approach to distributed syntonization (frequency alignment) for the coordination of nodes in open loop coherent distributed antenna arrays to enable distributed beamforming is presented. This approach makes use of the concept of consensus optimization among nodes without requiring a centralized control. Decentralized frequency consensus can be achieved through iterative frequency exchange am… ▽ More A new approach to distributed syntonization (frequency alignment) for the coordination of nodes in open loop coherent distributed antenna arrays to enable distributed beamforming is presented. This approach makes use of the concept of consensus optimization among nodes without requiring a centralized control. Decentralized frequency consensus can be achieved through iterative frequency exchange among nodes. We derive a model of the signal received from a coherent distributed array and analyze the effects on beamforming of phase errors induced by oscillator frequency drift. We introduce and discuss the average consensus protocol for frequency transfer in undirected networks where each node transmits and receives frequency information from other nodes. We analyze the following cases: 1) undirected networks with a static topology; 2) undirected networks with dynamic topology, where connections between nodes are made and lost dynamically; and 3) undirected networks with oscillator frequency drift. We show that all the nodes in a given network achieve average consensus and the number of iterations needed to achieve consensus can be minimized for a given cluster of nodes. Numerical simulations demonstrate that the consensus algorithm enables tolerable errors to obtain high coherent gain of greater that 90\% of the ideal gain in an error-free distributed phased array. △ Less

Submitted 22 November, 2019; originally announced November 2019.

Comments: Submitted to IEEE Transactions on Wireless Communications