Showing 1–18 of 18 results for author: Muller, F

CONQURE: A Co-Execution Environment for Quantum and Classical Resources

Authors: Atulya Mahesh, Swastik Mittal, Frank Mueller

Abstract: Cutting edge classical computing today relies on a combination of CPU-based computing with a strong reliance on accelerators. In particular, high-performance computing (HPC) and machine learning (ML) rely heavily on acceleration via GPUs for numerical kernels. In the future, acceleration via quantum devices may complement GPUs for kernels where algorithms provide quantum advantage, i.e., significa… ▽ More Cutting edge classical computing today relies on a combination of CPU-based computing with a strong reliance on accelerators. In particular, high-performance computing (HPC) and machine learning (ML) rely heavily on acceleration via GPUs for numerical kernels. In the future, acceleration via quantum devices may complement GPUs for kernels where algorithms provide quantum advantage, i.e., significant speedups over classical algorithms. Computing with quantum kernels mapped onto quantum processing units (QPUs) requires seamless integration into HPC and ML. However, quantum offloading onto HPC/cloud lacks open-source software infrastructure. For classical algorithms, parallelization standards, such as OpenMP, MPI, or CUDA exist. In contrast, a lack of quantum abstractions currently limits the adoption of quantum acceleration in practical applications creating a gap between quantum algorithm development and practical HPC integration. Such integration needs to extend to efficient quantum offloading of kernels, which further requires scheduling of quantum resources, control of QPU kernel execution, tracking of QPU results, providing results to classical calling contexts and coordination with HPC scheduling. This work proposes CONQURE, a co-execution environment for quantum and classical resources. CONQURE is a fully open-source cloud queue framework that presents a novel modular scheduling framework allowing users to offload OpenMP quantum kernels to QPUs as quantum circuits, to relay results back to calling contexts in classical computing, and to schedule quantum resources via our CONQURE API. We show our API has a low overhead averaging 12.7ms in our tests, and we demonstrate functionality on an ion-trap device. Our OpenMP extension enables the parallelization of VQE runs with a 3.1X reduction in runtime. △ Less

Submitted 16 June, 2025; v1 submitted 4 May, 2025; originally announced May 2025.

An iteration-free approach to excitation harmonization

Authors: Patrick Hippold, Gleb Kleyman, Lukas Woiwode, Tong Wei, Florian Müller, Christoph Schwingshackl, Maren Scheel, Sebastian Tatzko, Malte Krack

Abstract: Sinusoidal excitation is particularly popular for testing structures in the nonlinear regime. Due to the nonlinear behavior and the inevitable feedback of the structure on the exciter, higher harmonics in the applied excitation are generated. This is undesired, because the acquired response may deviate substantially from that of the structure under purely sinusoidal excitation, in particular if on… ▽ More Sinusoidal excitation is particularly popular for testing structures in the nonlinear regime. Due to the nonlinear behavior and the inevitable feedback of the structure on the exciter, higher harmonics in the applied excitation are generated. This is undesired, because the acquired response may deviate substantially from that of the structure under purely sinusoidal excitation, in particular if one of the higher harmonics engages into resonance. We present a new approach to suppress those higher excitation harmonics and thus the unwanted exciter-structure interaction: Higher harmonics are added to the voltage input to the shaker whose Fourier coefficients are adjusted via feedback control until the excitation is purely sinusoidal. The stability of this method is analyzed for a simplified model; the resulting closed-form expressions are useful, among others, to select an appropriate exciter configuration, including the drive point. A practical procedure for the control design is suggested. The proposed method is validated in virtual and real experiments of internally resonant structures, in the two common configurations of force excitation via a stinger and base excitation. Excellent performance is achieved already when using the same control gains for all harmonics, throughout the tested range of amplitudes and frequencies, even in the strongly nonlinear regime. Compared to the iterative state of the art, it is found that the proposed method is simpler to implement, enables faster testing and it is easy to achieve a lower harmonic distortion. △ Less

Submitted 23 October, 2024; originally announced October 2024.

Experimental analysis of the TRC benchmark system

Authors: Arati Bhattu, Svenja Hermann, Nidhal Jamia, Florian Müller, Maren Scheel, Christoph Schwingshackl, H. Nevzat Özgüven, Malte Krack

Abstract: The Tribomechadynamics Research Challenge (TRC) was a blind prediction of the vibration behavior of a thin plate clamped on two sides using bolted joints. The first bending mode's natural frequency and damping ratio were requested as function of the amplitude, starting from the linear regime until high levels, where both frictional contact and nonlinear bending-stretching coupling become relevant.… ▽ More The Tribomechadynamics Research Challenge (TRC) was a blind prediction of the vibration behavior of a thin plate clamped on two sides using bolted joints. The first bending mode's natural frequency and damping ratio were requested as function of the amplitude, starting from the linear regime until high levels, where both frictional contact and nonlinear bending-stretching coupling become relevant. The predictions were confronted with experimental results in a companion paper; the present article addresses the experimental analysis of this benchmark system. Amplitude-dependent modal data was obtained from phase resonance and response controlled tests. An original variant of response controlled testing is proposed: Instead of a fixed frequency interval, a fixed phase interval is analyzed. This way, the high excitation levels required outside resonance, which could activate unwanted exciter nonlinearity, are avoided. Consistency of testing methods is carefully analyzed. Overall, these measures have permitted to gain high confidence in the acquired modal data. The different sources of the remaining uncertainty were further analyzed. A low reassembly-variability but a moderate time-variability were identified, where the latter is attributed to some thermal sensitivity of the system. Two nominally identical plates were analyzed, which both have an appreciable initial curvature, and a significant effect on the vibration behavior was found depending on whether the plate is aligned/misaligned with the support structure. Further, a 1:2 nonlinear modal interaction with the first torsion mode was observed, which only occurs in the aligned configurations. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Journal ref: Journal of Structural Dynamics, 2024

On the locomotion of the slider within a self-adaptive beam-slider system

Authors: Florian Müller, Malte Krack

Abstract: A beam-slider system is considered whose passive self-adaption relies on an intricate locomotion process involving both frictional and unilateral contact. The system also exploits geometric nonlinearity to achieve broadband efficacy. The dynamics of the system take place on three distinct time scales: On the fast time scale of the harmonic base excitation are the vibrations and the locomotion cycl… ▽ More A beam-slider system is considered whose passive self-adaption relies on an intricate locomotion process involving both frictional and unilateral contact. The system also exploits geometric nonlinearity to achieve broadband efficacy. The dynamics of the system take place on three distinct time scales: On the fast time scale of the harmonic base excitation are the vibrations and the locomotion cycle. On the slow time scale, the slider changes its position along the beam, and the overall vibration level varies. Finally, on an intermediate time scale, strong modulations of the vibration amplitude may take place. In the present work, first, an analytical approximation of the beam's response on the slow time scale is derived as function of the slider position, which is a crucial prerequisite for identifying the main drivers of the slider's locomotion. Then, the most important forms of locomotion are described and approximations of their individual contribution to the overall slider transport are estimated. Finally, the theoretical results are compared against numerical results obtained from an experimentally validated model. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Data-driven Topology and Parameter Identification in Distribution Systems with limited Measurements

Authors: Steven de Jongh, Felicitas Mueller, Fabian Osterberg, Claudio A. Cañizares, Thomas Leibfried, Kankar Bhattacharya

Abstract: This manuscript presents novel techniques for identifying the switch states, phase identification, and estimation of equipment parameters in multi-phase low voltage electrical grids, which is a major challenge in long-standing German low voltage grids that lack observability and are heavily impacted by modelling errors. The proposed methods are tailored for systems with a limited number of spatial… ▽ More This manuscript presents novel techniques for identifying the switch states, phase identification, and estimation of equipment parameters in multi-phase low voltage electrical grids, which is a major challenge in long-standing German low voltage grids that lack observability and are heavily impacted by modelling errors. The proposed methods are tailored for systems with a limited number of spatially distributed measuring devices, which measure voltage magnitudes at specific nodes and some line current magnitudes. The overall approach employs a problem decomposition strategy to divide the problem into smaller subproblems, which are addressed independently. The techniques for identifying switch states and system phases are based on heuristics and a binary optimization problem using correlation analysis of the measured time series. The estimation of equipment parameters is achieved through a data-driven regression approach and by an optimization problem, and the identification of cable types is solved using a Mixed-Integer Quadratic Programming solver. To validate the presented methods, a realistic grid is used and the presented techniques are evaluated for their resilience to data quality and time resolution, discussing the limitations of the proposed methods. △ Less

Submitted 18 August, 2023; originally announced August 2023.

DISQ: Dynamic Iteration Skipping for Variational Quantum Algorithms

Authors: Junyao Zhang, Hanrui Wang, Gokul Subramanian Ravi, Frederic T. Chong, Song Han, Frank Mueller, Yiran Chen

Abstract: This paper proposes DISQ to craft a stable landscape for VQA training and tackle the noise drift challenge. DISQ adopts a "drift detector" with a reference circuit to identify and skip iterations that are severely affected by noise drift errors. Specifically, the circuits from the previous training iteration are re-executed as a reference circuit in the current iteration to estimate noise drift im… ▽ More This paper proposes DISQ to craft a stable landscape for VQA training and tackle the noise drift challenge. DISQ adopts a "drift detector" with a reference circuit to identify and skip iterations that are severely affected by noise drift errors. Specifically, the circuits from the previous training iteration are re-executed as a reference circuit in the current iteration to estimate noise drift impacts. The iteration is deemed compromised by noise drift errors and thus skipped if noise drift flips the direction of the ideal optimization gradient. To enhance noise drift detection reliability, we further propose to leverage multiple reference circuits from previous iterations to provide a well founded judge of current noise drift. Nevertheless, multiple reference circuits also introduce considerable execution overhead. To mitigate extra overhead, we propose Pauli-term subsetting (prime and minor subsets) to execute only observable circuits with large coefficient magnitudes (prime subset) during drift detection. Only this minor subset is executed when the current iteration is drift-free. Evaluations across various applications and QPUs demonstrate that DISQ can mitigate a significant portion of the noise drift impact on VQAs and achieve 1.51-2.24x fidelity improvement over the traditional baseline. DISQ's benefit is 1.1-1.9x over the best alternative approach while boosting average noise detection speed by 2.07x △ Less

Submitted 12 July, 2024; v1 submitted 12 August, 2023; originally announced August 2023.

Image Denoising and the Generative Accumulation of Photons

Authors: Alexander Krull, Hector Basevi, Benjamin Salmon, Andre Zeug, Franziska Müller, Samuel Tonks, Leela Muppala, Ales Leonardis

Abstract: We present a fresh perspective on shot noise corrupted images and noise removal. By viewing image formation as the sequential accumulation of photons on a detector grid, we show that a network trained to predict where the next photon could arrive is in fact solving the minimum mean square error (MMSE) denoising task. This new perspective allows us to make three contributions: We present a new stra… ▽ More We present a fresh perspective on shot noise corrupted images and noise removal. By viewing image formation as the sequential accumulation of photons on a detector grid, we show that a network trained to predict where the next photon could arrive is in fact solving the minimum mean square error (MMSE) denoising task. This new perspective allows us to make three contributions: We present a new strategy for self-supervised denoising, We present a new method for sampling from the posterior of possible solutions by iteratively sampling and adding small numbers of photons to the image. We derive a full generative model by starting this process from an empty canvas. We call this approach generative accumulation of photons (GAP). We evaluate our method quantitatively and qualitatively on 4 new fluorescence microscopy datasets, which will be made available to the community. We find that it outperforms supervised, self-supervised and unsupervised baselines or performs on-par. △ Less

Submitted 1 August, 2023; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: Paper with supplement. Typos corrected

MSC Class: 68

Parameter Estimation in Electrical Distribution Systems with limited Measurements using Regression Methods

Authors: Steven de Jongh, Felicitas Mueller, Claudio Cañizares, Thomas Leibfried, Kankar Bhattacharya

Abstract: This paper presents novel methods for parameter identification in electrical grids with small numbers of spatially distributed measuring devices, which is an issue for distribution system operators managing aged and not properly mapped underground Low Voltage (LV) grids, especially in Germany. For this purpose, the total impedance of individual branches of the overall system is estimated by measur… ▽ More This paper presents novel methods for parameter identification in electrical grids with small numbers of spatially distributed measuring devices, which is an issue for distribution system operators managing aged and not properly mapped underground Low Voltage (LV) grids, especially in Germany. For this purpose, the total impedance of individual branches of the overall system is estimated by measuring currents and voltages at a subset of all system nodes over time. It is shown that, under common assumptions for electrical distsribution systems, an estimate of the total impedance can be made using readily computable proxies. Different regression methods are then used and compared to estimate the total impedance of the respective branches, with varying weights of the input data. The results on realistic LV feeders with different branch lengths and number of unmeasured segments are discussed and multiple influencing factors are investigated through simulations. It is shown that estimates of the total impedances can be obtained with acceptable quality under realistic assumptions. △ Less

Submitted 18 August, 2023; v1 submitted 6 June, 2023; originally announced June 2023.

A Homogeneous Processing Fabric for Matrix-Vector Multiplication and Associative Search Using Ferroelectric Time-Domain Compute-in-Memory

Authors: Xunzhao Yin, Qingrong Huang, Franz Müller, Shan Deng, Alptekin Vardar, Sourav De, Zhouhang Jiang, Mohsen Imani, Cheng Zhuo, Thomas Kämpfe, Kai Ni

Abstract: In this work, we propose a ferroelectric FET(FeFET) time-domain compute-in-memory (TD-CiM) array as a homogeneous processing fabric for binary multiplication-accumulation (MAC) and content addressable memory (CAM). We demonstrate that: i) the XOR(XNOR)/AND logic function can be realized using a single cell composed of 2FeFETs connected in series; ii) a two-phase computation in an inverter chain wi… ▽ More In this work, we propose a ferroelectric FET(FeFET) time-domain compute-in-memory (TD-CiM) array as a homogeneous processing fabric for binary multiplication-accumulation (MAC) and content addressable memory (CAM). We demonstrate that: i) the XOR(XNOR)/AND logic function can be realized using a single cell composed of 2FeFETs connected in series; ii) a two-phase computation in an inverter chain with each stage featuring the XOR/AND cell to control the associated capacitor loading and the computation results of binary MAC and CAM are reflected in the chain output signal delay, illustrating full digital compatibility; iii) comprehensive theoretical and experimental validation of the proposed 2FeFET cell and inverter delay chains and their robustness against FeFET variation; iv) the homogeneous processing fabric is applied in hyperdimensional computing to show dynamic and fine-grain resource allocation to accommodate different tasks requiring varying demands over the binary MAC and CAM resources. △ Less

Submitted 24 September, 2022; originally announced September 2022.

Comments: 8 pages, 8 figures

Nonlinear damping quantification from phase-resonant tests under base excitation

Authors: Florien Müller, Lukas Woiwode, Johann Gross, Maren Scheel, Malte Krack

Abstract: The present work addresses the experimental identification of amplitude-dependent modal parameters (modal frequency, damping ratio, Fourier coefficients of periodic modal oscillation). Phase-resonant testing has emerged as an important method for this task, as it substantially reduces the amount of data required for the identification compared to conventional frequency-response testing at differen… ▽ More The present work addresses the experimental identification of amplitude-dependent modal parameters (modal frequency, damping ratio, Fourier coefficients of periodic modal oscillation). Phase-resonant testing has emerged as an important method for this task, as it substantially reduces the amount of data required for the identification compared to conventional frequency-response testing at different excitation/response levels. In the case of shaker-stinger excitation, the applied excitation force is commonly measured in order to quantify the amplitude-dependent modal damping ratio from the phase-resonant test data. In the case of base excitation, however, the applied excitation force is challenging or impossible to measure. In this work we develop an original method for damping quantification from phase-resonant tests. It relies solely on response measurement; it avoids the need to resort to force measurement. The key idea is to estimate the power provided by the distributed inertia force imposed by the base motion. We develop both a model-free and a model-based variant of the method. We validate the developed method first in virtual experiments of a friction-damped and a geometrically nonlinear system, and then in a physical experiment involving a thin beam clamped at both ends via bolted joints. We conclude that the method is highly robust and provides high accuracy already for a reasonable number of sensors. △ Less

Submitted 10 May, 2022; originally announced May 2022.

Simulation of machine learning-based 6G systems in virtual worlds

Authors: Ailton Oliveira, Felipe Bastos, Isabela Trindade, Walter Frazao, Arthur Nascimento, Diego Gomes, Francisco Muller, Aldebaro Klautau

Abstract: Digital representations of the real world are being used in many applications, such as augmented reality. 6G systems will not only support use cases that rely on virtual worlds but also benefit from their rich contextual information to improve performance and reduce communication overhead. This paper focuses on the simulation of 6G systems that rely on a 3D representation of the environment, as ca… ▽ More Digital representations of the real world are being used in many applications, such as augmented reality. 6G systems will not only support use cases that rely on virtual worlds but also benefit from their rich contextual information to improve performance and reduce communication overhead. This paper focuses on the simulation of 6G systems that rely on a 3D representation of the environment, as captured by cameras and other sensors. We present new strategies for obtaining paired MIMO channels and multimodal data. We also discuss trade-offs between speed and accuracy when generating channels via ray tracing. We finally provide beam selection simulation results to assess the proposed methodology. △ Less

Submitted 15 April, 2022; originally announced April 2022.

Journal ref: ITU Journal on Future and Evolving Technologies, Volume 2 (2021), Issue 4 - AI and machine learning solutions in 5G and future networks, Pages 113-123

An Ultra-Compact Single FeFET Binary and Multi-Bit Associative Search Engine

Authors: Xunzhao Yin, Franz Müller, Qingrong Huang, Chao Li, Mohsen Imani, Zeyu Yang, Jiahao Cai, Maximilian Lederer, Ricardo Olivo, Nellie Laleni, Shan Deng, Zijian Zhao, Cheng Zhuo, Thomas Kämpfe, Kai Ni

Abstract: Content addressable memory (CAM) is widely used in associative search tasks for its highly parallel pattern matching capability. To accommodate the increasingly complex and data-intensive pattern matching tasks, it is critical to keep improving the CAM density to enhance the performance and area efficiency. In this work, we demonstrate: i) a novel ultra-compact 1FeFET CAM design that enables paral… ▽ More Content addressable memory (CAM) is widely used in associative search tasks for its highly parallel pattern matching capability. To accommodate the increasingly complex and data-intensive pattern matching tasks, it is critical to keep improving the CAM density to enhance the performance and area efficiency. In this work, we demonstrate: i) a novel ultra-compact 1FeFET CAM design that enables parallel associative search and in-memory hamming distance calculation; ii) a multi-bit CAM for exact search using the same CAM cell; iii) compact device designs that integrate the series resistor current limiter into the intrinsic FeFET structure to turn the 1FeFET1R into an effective 1FeFET cell; iv) a successful 2-step search operation and a sufficient sensing margin of the proposed binary and multi-bit 1FeFET1R CAM array with sizes of practical interests in both experiments and simulations, given the existing unoptimized FeFET device variation; v) 89.9x speedup and 66.5x energy efficiency improvement over the state-of-the art alignment tools on GPU in accelerating genome pattern matching applications through the hyperdimensional computing paradigm. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: 20 pages, 14 figures

Deep Random Forest with Ferroelectric Analog Content Addressable Memory

Authors: Xunzhao Yin, Franz Müller, Ann Franchesca Laguna, Chao Li, Wenwen Ye, Qingrong Huang, Qinming Zhang, Zhiguo Shi, Maximilian Lederer, Nellie Laleni, Shan Deng, Zijian Zhao, Michael Niemier, Xiaobo Sharon Hu, Cheng Zhuo, Thomas Kämpfe, Kai Ni

Abstract: Deep random forest (DRF), which incorporates the core features of deep learning and random forest (RF), exhibits comparable classification accuracy, interpretability, and low memory and computational overhead when compared with deep neural networks (DNNs) in various information processing tasks for edge intelligence. However, the development of efficient hardware to accelerate DRF is lagging behin… ▽ More Deep random forest (DRF), which incorporates the core features of deep learning and random forest (RF), exhibits comparable classification accuracy, interpretability, and low memory and computational overhead when compared with deep neural networks (DNNs) in various information processing tasks for edge intelligence. However, the development of efficient hardware to accelerate DRF is lagging behind its DNN counterparts. The key for hardware acceleration of DRF lies in efficiently realizing the branch-split operation at decision nodes when traversing a decision tree. In this work, we propose to implement DRF through simple associative searches realized with ferroelectric analog content addressable memory (ACAM). Utilizing only two ferroelectric field effect transistors (FeFETs), the ultra-compact ACAM cell can perform a branch-split operation with an energy-efficient associative search by storing the decision boundaries as the analog polarization states in an FeFET. The DRF accelerator architecture and the corresponding mapping of the DRF model to the ACAM arrays are presented. The functionality, characteristics, and scalability of the FeFET ACAM based DRF and its robustness against FeFET device non-idealities are validated both in experiments and simulations. Evaluation results show that the FeFET ACAM DRF accelerator exhibits 10^6x/16x and 10^6x/2.5x improvements in terms of energy and latency when compared with other deep random forest hardware implementations on the state-of-the-art CPU/ReRAM, respectively. △ Less

Submitted 6 October, 2021; originally announced October 2021.

Comments: 44 pages, 16 figures

Neural Predictive Control for the Optimization of Smart Grid Flexibility Schedules

Authors: Steven de Jongh, Sina Steinle, Anna Hlawatsch, Felicitas Mueller, Michael Suriyah, Thomas Leibfried

Abstract: Model predictive control (MPC) is a method to formulate the optimal scheduling problem for grid flexibilities in a mathematical manner. The resulting time-constrained optimization problem can be re-solved in each optimization time step using classical optimization methods such as Second Order Cone Programming (SOCP) or Interior Point Methods (IPOPT). When applying MPC in a rolling horizon scheme,… ▽ More Model predictive control (MPC) is a method to formulate the optimal scheduling problem for grid flexibilities in a mathematical manner. The resulting time-constrained optimization problem can be re-solved in each optimization time step using classical optimization methods such as Second Order Cone Programming (SOCP) or Interior Point Methods (IPOPT). When applying MPC in a rolling horizon scheme, the impact of uncertainty in forecasts on the optimal schedule is reduced. While MPC methods promise accurate results for time-constrained grid optimization they are inherently limited by the calculation time needed for large and complex power system models. Learning the optimal control behaviour using function approximation offers the possibility to determine near-optimal control actions with short calculation time. A Neural Predictive Control (NPC) scheme is proposed to learn optimal control policies for linear and nonlinear power systems through imitation. It is demonstrated that this procedure can find near-optimal solutions, while reducing the calculation time by an order of magnitude. The learned controllers are validated using a benchmark smart grid. △ Less

Submitted 19 August, 2021; originally announced August 2021.

Comments: 978-1-6654-4389-0/21/$31.00 C 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective

Unlocking the Potential of Flexible Energy Resources to Help Balance the Power Grid

Authors: Fabian L. Müller, Stefan Woerner, John Lygeros

Abstract: Flexible energy resources can help balance the power grid by providing different types of ancillary services. However, the balancing potential of most types of resources is restricted by physical constraints such as the size of their energy buffer, limits on power-ramp rates, or control delays. Using the example of Secondary Frequency Regulation, this paper shows how the flexibility of various res… ▽ More Flexible energy resources can help balance the power grid by providing different types of ancillary services. However, the balancing potential of most types of resources is restricted by physical constraints such as the size of their energy buffer, limits on power-ramp rates, or control delays. Using the example of Secondary Frequency Regulation, this paper shows how the flexibility of various resources can be exploited more efficiently by considering multiple resources with complementary physical properties and controlling them in a coordinated way. To this end, optimal adjustable control policies are computed based on robust optimization. Our problem formulation takes into account power ramp-rate constraints explicitly, and accurately models the different timescales and lead times of the energy and reserve markets. Simulations demonstrate that aggregations of select resources can offer significantly more regulation capacity than the resources could provide individually. △ Less

Submitted 20 June, 2018; originally announced June 2018.

Comments: arXiv admin note: text overlap with arXiv:1804.03892

Large-Scale Demonstration of Precise Demand Response Provided by Residential Heating Systems

Authors: Fabian L. Müller, Bernhard Jansen

Abstract: Being able to adjust the demand of electricity can be an effective means for power system operators to compensate fluctuating renewable generation, to avoid grid congestion, and to cope with other contingencies. Electric heating and cooling systems of buildings can provide different demand response services because their electricity consumption is inherently flexible because of their thermal inert… ▽ More Being able to adjust the demand of electricity can be an effective means for power system operators to compensate fluctuating renewable generation, to avoid grid congestion, and to cope with other contingencies. Electric heating and cooling systems of buildings can provide different demand response services because their electricity consumption is inherently flexible because of their thermal inertia. This paper reports on the results of a large-scale demand response demonstration involving a population of more than 300 residential buildings with heat pump installations. We show how the energetic behavior and flexibility of individual systems can be identified autonomously based only on energy meter data and outdoor air temperature measurements, and how the aggregate demand response potential of the population can be quantified. Various load reduction and rebound damping experiments illustrate the effectiveness of the approach: the load reductions can be predicted precisely and amount to 40-65% of the aggregate load, and the rebound can be damped efficiently. △ Less

Submitted 20 June, 2018; originally announced June 2018.

Ramp-Rate-Constrained Bidding of Energy and Frequency Reserves in Real Market Settings

Authors: Fabian L. Müller, Stefan Woerner, John Lygeros

Abstract: The energetic flexibility of electric energy resources can be exploited when trading on wholesale energy and ancillary service markets. This paper considers the problem of a Balance Responsible Party to maximize its profit from trading on energy markets while simultaneously offering Secondary Frequency Reserves to the System Operator. However, the accurate provision of regulation power can be comp… ▽ More The energetic flexibility of electric energy resources can be exploited when trading on wholesale energy and ancillary service markets. This paper considers the problem of a Balance Responsible Party to maximize its profit from trading on energy markets while simultaneously offering Secondary Frequency Reserves to the System Operator. However, the accurate provision of regulation power can be compromised by power ramp-rate limitations of the resources providing the service. To avoid this shortcoming, we take power ramp-rate constraints into account explicitly when computing optimal adjustable energy trading policies that are robust against uncertain activation of reserves. The approach proposed is applicable in real market settings because it models all the different timescales of the day-ahead, intra-day, and reserve markets. Finally, the effect of different market settings and energy trading policies on the amount of available Secondary Frequency Reserves is investigated. △ Less

Submitted 11 April, 2018; originally announced April 2018.

Comments: 9 pages

Aggregation and Disaggregation of Energetic Flexibility from Distributed Energy Resources

Authors: Fabian L. Müller, Jácint Szabó, Olle Sundström, John Lygeros

Abstract: A variety of energy resources has been identified as being flexible in their electric energy consumption or generation. This energetic flexibility can be used for various purposes such as minimizing energy procurement costs or providing ancillary services to power grids. To fully leverage the flexibility available from distributed small-scale resources, their flexibility must be quantified and agg… ▽ More A variety of energy resources has been identified as being flexible in their electric energy consumption or generation. This energetic flexibility can be used for various purposes such as minimizing energy procurement costs or providing ancillary services to power grids. To fully leverage the flexibility available from distributed small-scale resources, their flexibility must be quantified and aggregated. This paper introduces a generic and scalable approach for flexible energy systems to quantitatively describe and price their flexibility based on zonotopic sets. The description proposed allows aggregators to efficiently pool the flexibility of large numbers of systems and to make control and market decisions on the aggregate level. In addition, an algorithm is presented that distributes aggregate-level control decisions among the individual systems of the pool in an economically fair and computationally efficient way. Finally, it is shown how the zonotopic description of flexibility enables an efficient computation of aggregate regulation power bid-curves. △ Less

Submitted 8 May, 2017; originally announced May 2017.