Showing 1–7 of 7 results for author: Mukherjee, B

A Distributed Local Energy Market Clearing Framework Using a Two-Loop ADMM Method

Authors: Milad Kabirifar, Biswarup Mukherjee, S. Gokul Krishnan, Charalambos Konstantinou, Subhash Lakshminarayana

Abstract: The diversity of prosumers' resources in energy communities can provide significant technical and economic benefits to both prosumers and the distribution system operator (DSO). To maximize these benefits, a coordination framework is required to address all techno-economic constraints as well as the objectives of all agents. This paper presents a fully distributed market-clearing scheme to coordin… ▽ More The diversity of prosumers' resources in energy communities can provide significant technical and economic benefits to both prosumers and the distribution system operator (DSO). To maximize these benefits, a coordination framework is required to address all techno-economic constraints as well as the objectives of all agents. This paper presents a fully distributed market-clearing scheme to coordinate the strategies of agents within a local energy community. In the proposed framework, prosumers, the DSO, and the local market operator (LMO) are the participating agents. The framework addresses the preferences and techno-economic constraints of all actors while preserving their privacy. The proposed model is based on a modified alternating direction method of multipliers (ADMM) method with two outer and inner loops; the outer loop models the interactions between the LMO and prosumers, while the inner loop addresses the interactions between the LMO and the DSO. The model is demonstrated on IEEE-69bus test network, showcasing its effectiveness from various perspectives. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: This publication is based upon work supported by King Abdullah University of Science and Technology under Award No. RFS-OFP2023-5505. The publication has been accepted at the 2025 IEEE PowerTech conference in Germany

Direction of slip modulates the perception of slip distance and slip speed

Authors: Ayesha Tooba Khan, Deepak Joshi, Biswarup Mukherjee

Abstract: Purpose: The purpose of this study was to investigate the psychophysical understanding of the slip stimulus. We emphasized that the perception of slip and its characteristics, such as slip distance and slip speed depend on the interaction between slip direction, slip distance as well as slip speed. Methods: We developed a novel slip induction device to simulate the artificial sense of slip. We con… ▽ More Purpose: The purpose of this study was to investigate the psychophysical understanding of the slip stimulus. We emphasized that the perception of slip and its characteristics, such as slip distance and slip speed depend on the interaction between slip direction, slip distance as well as slip speed. Methods: We developed a novel slip induction device to simulate the artificial sense of slip. We conducted a psychophysical experiment on eight healthy subjects. The experiment was designed to evaluate the effect of slip direction on slip perception as well as on the perception of slip distance and slip speed. A series of psychophysical questions were asked at the end of the slip stimulation to record the subjective responses of the participants. The average success rate (%) was used to quantify the subject responses. Results: We demonstrated that the perception of slip is independent of slip direction however, perception of slip distance and slip speed are significantly modulated by slip direction. We also observed that a significant interaction exists between slip distance and slip speed in the upward slip direction. It was also observed that the average success rate was significantly different for various combinations of slip distance and slip speed in the upward slip direction. Conclusions: Our study clearly establishes a significant interaction between the slip direction, slip distance, and slip speed for psychophysical understanding of the perception of slip distance and slip speed. △ Less

Submitted 8 March, 2024; originally announced March 2024.

Sparse Wearable Sonomyography Sensor-based Proprioceptive Proportional Control Across Multiple Gestures

Authors: Anne Tryphosa Kamatham, Kavita Sharma, Srikumar Venkataraman, Biswarup Mukherjee

Abstract: Sonomyography (SMG) is a non-invasive technique that uses ultrasound imaging to detect the dynamic activity of muscles. Wearable SMG systems have recently gained popularity due to their potential as human-computer interfaces for their superior performance compared to conventional methods. This paper demonstrates real-time positional proportional control of multiple gestures using a multiplexed 8-c… ▽ More Sonomyography (SMG) is a non-invasive technique that uses ultrasound imaging to detect the dynamic activity of muscles. Wearable SMG systems have recently gained popularity due to their potential as human-computer interfaces for their superior performance compared to conventional methods. This paper demonstrates real-time positional proportional control of multiple gestures using a multiplexed 8-channel wearable SMG system. The amplitude-mode ultrasound signals from the SMG system were utilized to detect muscle activity from the forearm of 8 healthy individuals. The derived signals were used to control the on-screen movement of the cursor. A target achievement task was performed to analyze the performance of our SMG-based human-machine interface. Our wearable SMG system provided accurate, stable, and intuitive control in real-time by achieving an average success rate greater than 80% with all gestures. Furthermore, the wearable SMG system's abilities to detect volitional movement and decode movement kinematic information from SMG trajectories using standard performance metrics were evaluated. Our results provide insights to validate SMG as an intuitive human-machine interface. △ Less

Submitted 8 March, 2024; originally announced March 2024.

A Sonomyography-based Muscle Computer Interface for Individuals with Spinal Cord Injury

Authors: Manikandan Shenbagam, Anne Tryphosa Kamatham, Priyanka Vijay, Suman Salimath, Shriniwas Patwardhan, Siddhartha Sikdar, Chitra Kataria, Biswarup Mukherjee

Abstract: Impairment of hand functions in individuals with spinal cord injury (SCI) severely disrupts activities of daily living. Recent advances have enabled rehabilitation assisted by robotic devices to augment the residual function of the muscles. Traditionally, non-invasive electromyography-based peripheral neural interfaces have been utilized to sense volitional motor intent to drive robotic assistive… ▽ More Impairment of hand functions in individuals with spinal cord injury (SCI) severely disrupts activities of daily living. Recent advances have enabled rehabilitation assisted by robotic devices to augment the residual function of the muscles. Traditionally, non-invasive electromyography-based peripheral neural interfaces have been utilized to sense volitional motor intent to drive robotic assistive devices. However, the dexterity and fidelity of control that can be achieved with electromyography-based control have been limited due to inherent limitations in signal quality. We have developed and tested a muscle-computer interface (MCI) utilizing sonomyography to provide control of a virtual cursor for individuals with motor-incomplete spinal cord injury. We demonstrate that individuals with SCI successfully gained control of a virtual cursor by utilizing contractions of muscles of the wrist joint. The sonomyography-based interface enabled control of the cursor at multiple graded levels demonstrating the ability to achieve accurate and stable endpoint control. Our sonomyography-based muscle-computer interface can enable dexterous control of upper-extremity assistive devices for individuals with motor-incomplete SCI. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Technology Pipeline for Large Scale Cross-Lingual Dubbing of Lecture Videos into Multiple Indian Languages

Authors: Anusha Prakash, Arun Kumar, Ashish Seth, Bhagyashree Mukherjee, Ishika Gupta, Jom Kuriakose, Jordan Fernandes, K V Vikram, Mano Ranjith Kumar M, Metilda Sagaya Mary, Mohammad Wajahat, Mohana N, Mudit Batra, Navina K, Nihal John George, Nithya Ravi, Pruthwik Mishra, Sudhanshu Srivastava, Vasista Sai Lodagala, Vandan Mujadia, Kada Sai Venkata Vineeth, Vrunda Sukhadia, Dipti Sharma, Hema Murthy, Pushpak Bhattacharya , et al. (2 additional authors not shown)

Abstract: Cross-lingual dubbing of lecture videos requires the transcription of the original audio, correction and removal of disfluencies, domain term discovery, text-to-text translation into the target language, chunking of text using target language rhythm, text-to-speech synthesis followed by isochronous lipsyncing to the original video. This task becomes challenging when the source and target languages… ▽ More Cross-lingual dubbing of lecture videos requires the transcription of the original audio, correction and removal of disfluencies, domain term discovery, text-to-text translation into the target language, chunking of text using target language rhythm, text-to-speech synthesis followed by isochronous lipsyncing to the original video. This task becomes challenging when the source and target languages belong to different language families, resulting in differences in generated audio duration. This is further compounded by the original speaker's rhythm, especially for extempore speech. This paper describes the challenges in regenerating English lecture videos in Indian languages semi-automatically. A prototype is developed for dubbing lectures into 9 Indian languages. A mean-opinion-score (MOS) is obtained for two languages, Hindi and Tamil, on two different courses. The output video is compared with the original video in terms of MOS (1-5) and lip synchronisation with scores of 4.09 and 3.74, respectively. The human effort also reduces by 75%. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Cyclone Preparedness, Rescue Operations and Damage Assessment using UAVs

Authors: Rudrashis Majumder, Shuvrangshu Jana, Prathyush P. Menon, Debasish Ghose, N. M. Prusty, Bipasha Mukherjee, Aditi Ghosh

Abstract: UAV's capability to access remote and inaccessible areas within a quick time can be utilized for effective cyclone management. This paper presents the possible application of UAVs at different stages of cyclone mitigation. The overall system architecture necessary for preparedness, rescue operation, resource allocation, and damage assessment using UAVs during cyclones is described. Although genera… ▽ More UAV's capability to access remote and inaccessible areas within a quick time can be utilized for effective cyclone management. This paper presents the possible application of UAVs at different stages of cyclone mitigation. The overall system architecture necessary for preparedness, rescue operation, resource allocation, and damage assessment using UAVs during cyclones is described. Although general commercial UAVs are reported to be used in cyclone operations, UAV systems should be planned specifically for cyclone operations to improve efficiency. Here, the specification required for effective and safe UAV operations in the post-cyclone scenario is presented. Mission planning required for various rescue, relief, and damage assessment missions related to cyclone management is discussed. A case study of deploying UAV in Amphan cyclone operation in West Bengal is also presented. This paper can help disaster management authorities to develop UAV systems specifically to cater to cyclone operations. △ Less

Submitted 12 March, 2022; originally announced March 2022.

Comments: 5th World Congress on Disaster Management, IIT Delhi, New Delhi, India

Optimal Planning of Single-Port and Multi-Port Charging Stations for Electric Vehicles in Medium Voltage Distribution Networks

Authors: Biswarup Mukherjee, Fabrizio Sossan

Abstract: This paper describes a method based on mixed-integer linear programming to cost-optimally locate and size chargers for electric vehicles (EVs) in distribution grids as a function of the driving demand. The problem accounts for the notion of single-port chargers (SPCs), where a charger can interface one EV maximum, and multi-port chargers (MPCs), where the same charger can interface multiple EVs. T… ▽ More This paper describes a method based on mixed-integer linear programming to cost-optimally locate and size chargers for electric vehicles (EVs) in distribution grids as a function of the driving demand. The problem accounts for the notion of single-port chargers (SPCs), where a charger can interface one EV maximum, and multi-port chargers (MPCs), where the same charger can interface multiple EVs. The advantage of MPCs is twofold. First, multiple ports allow arbitraging the charging among multiple vehicles without requiring the drivers to plug and unplug EVs. Second, the charger's power electronics is not sized for the total number of charging ports, enabling cost savings when the grid constraints are bottleneck of the problem. The proposed method can account for different charger typologies, such as slow and fast chargers, and model the drivers' flexibility of plugging and unplugging their EVs. Simulation results from a synthetic case study show that implementing MPCs is beneficial over both SPCs and drivers' flexibility in terms of total investments required for the charging infrastructure. △ Less

Submitted 13 November, 2021; originally announced November 2021.

Comments: This manuscript has been submitted to IEEE Transactions on Smart Grid