-
Optimal Placement of Electric Vehicle Charging Stations in Populated Regions of Tehran for Various Demands Distribution
Authors:
Armin Mosavi
Abstract:
Redacted by arXiv.
Redacted by arXiv.
△ Less
Submitted 8 March, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Optimal Application of Trajectory Optimization by Travel Profile for Electric Train in an Electrical Transportation System
Authors:
Armin Mosavi
Abstract:
Increasing greenhouse gas (GHG) emission is one of the most important concerns of world decision-makers. The considerable part of it belongs to the transportation systems. As a solution, the world is going to use urban electrical transportation systems, and thus designing optimal methods and novel strategies is essential nowadays. Indeed, reducing the amount of consumed electrical energy and hav…
▽ More
Increasing greenhouse gas (GHG) emission is one of the most important concerns of world decision-makers. The considerable part of it belongs to the transportation systems. As a solution, the world is going to use urban electrical transportation systems, and thus designing optimal methods and novel strategies is essential nowadays. Indeed, reducing the amount of consumed electrical energy and having optimum and efficient energy management for electrical means of transport requires several vital elements. Designing a travel profile is one of the most crucial parts of these methods. A travel profile for the fully electric train ET245 with three stations is designed and analyzed in Milan, Italy, as a case study in this paper. As the first step, route data are acquired by the Google Maps tool. Then, the train data is collected from the manufacturer's catalogues and datasheets. Finally, computations were performed by Excel spreadsheets. The results indicate that the designed path in the proposed travel profile is covered by a commercial speed and requires reasonable electrical energy, which is considered economical and advantageous.
△ Less
Submitted 1 March, 2023;
originally announced March 2023.
-
Energy-Exergy Analysis and Optimal Design of a Hydrogen Turbofan Engine
Authors:
Mohammadreza Sabzehali,
Somayeh Davoodabadi Farahani,
Amir Mosavi
Abstract:
In this study, the effect of inlet air cooling and fuel type on the performance parameters of thrust-specific fuel consumption (TSFC), thermal and exergetic efficiencies, entropy generation rate, and Nitrogen oxide emission intensity index (SNOx) of the GENX 1B70 engine is analyzed in two states of take-off and on design. The results show that with a 20-degree delicious reduction in inlet air temp…
▽ More
In this study, the effect of inlet air cooling and fuel type on the performance parameters of thrust-specific fuel consumption (TSFC), thermal and exergetic efficiencies, entropy generation rate, and Nitrogen oxide emission intensity index (SNOx) of the GENX 1B70 engine is analyzed in two states of take-off and on design. The results show that with a 20-degree delicious reduction in inlet air temperature on design conditions and JP10 fuel usage, the thermal efficiency and entropy generation rate, thrust and fuel mass flow rate, and TSFC of the engine increase by 1.85 percent, 16.51 percent, 11.76 percent, 10.53 percent, and 2.15 percent and SNOx and exergetic efficiency decrease by 2.11 percent and 26.60 percent, respectively. Also, optimization of the GENX 1B70 engine cycle as hydrogen fuel usage with three separate objective functions: thrust maximization, thermal efficiency maximization, and propulsive efficiency maximization on design point condition was performed based on the Genetic algorithm. Based on the economic approach and exero-environmental, the best cycles from the optimal states were selected using the TOPSIS algorithm. In on design conditions, entropy generation rate, nitrogen oxide production rate, and TSFC for the chosen cycle based on the economic approach +18.89 percent, +10.01 percent, and -0.21percent, respectively, and based on the exero-environmental approach -54.03percent, -42.02percent, and +21.44percent change compared to the base engine, respectively.
△ Less
Submitted 14 August, 2022;
originally announced August 2022.
-
Application of artificial intelligence techniques for automated detection of myocardial infarction: A review
Authors:
Javad Hassannataj Joloudari,
Sanaz Mojrian,
Issa Nodehi,
Amir Mashmool,
Zeynab Kiani Zadegan,
Sahar Khanjani Shirkharkolaie,
Roohallah Alizadehsani,
Tahereh Tamadon,
Samiyeh Khosravi,
Mitra Akbari Kohnehshari,
Edris Hassannatajjeloudari,
Danial Sharifrazi,
Amir Mosavi,
Hui Wen Loh,
Ru-San Tan,
U Rajendra Acharya
Abstract:
Myocardial infarction (MI) results in heart muscle injury due to receiving insufficient blood flow. MI is the most common cause of mortality in middle-aged and elderly individuals around the world. To diagnose MI, clinicians need to interpret electrocardiography (ECG) signals, which requires expertise and is subject to observer bias. Artificial intelligence-based methods can be utilized to screen…
▽ More
Myocardial infarction (MI) results in heart muscle injury due to receiving insufficient blood flow. MI is the most common cause of mortality in middle-aged and elderly individuals around the world. To diagnose MI, clinicians need to interpret electrocardiography (ECG) signals, which requires expertise and is subject to observer bias. Artificial intelligence-based methods can be utilized to screen for or diagnose MI automatically using ECG signals. In this work, we conducted a comprehensive assessment of artificial intelligence-based approaches for MI detection based on ECG as well as other biophysical signals, including machine learning (ML) and deep learning (DL) models. The performance of traditional ML methods relies on handcrafted features and manual selection of ECG signals, whereas DL models can automate these tasks. The review observed that deep convolutional neural networks (DCNNs) yielded excellent classification performance for MI diagnosis, which explains why they have become prevalent in recent years. To our knowledge, this is the first comprehensive survey of artificial intelligence techniques employed for MI diagnosis using ECG and other biophysical signals.
△ Less
Submitted 21 February, 2022; v1 submitted 5 July, 2021;
originally announced July 2021.
-
Adaptive Neuro-Fuzzy Inference System and a Multilayer Perceptron Model Trained with Grey Wolf Optimizer for Predicting Solar Diffuse Fraction
Authors:
Randall Claywell,
Laszlo Nadai,
Felde Imre,
Amir Mosavi
Abstract:
The accurate prediction of the solar Diffuse Fraction (DF), sometimes called the Diffuse Ratio, is an important topic for solar energy research. In the present study, the current state of Diffuse Irradiance research is discussed and then three robust, Machine Learning (ML) models, are examined using a large dataset (almost 8 years) of hourly readings from Almeria, Spain. The ML models used herein,…
▽ More
The accurate prediction of the solar Diffuse Fraction (DF), sometimes called the Diffuse Ratio, is an important topic for solar energy research. In the present study, the current state of Diffuse Irradiance research is discussed and then three robust, Machine Learning (ML) models, are examined using a large dataset (almost 8 years) of hourly readings from Almeria, Spain. The ML models used herein, are a hybrid Adaptive Network-based Fuzzy Inference System (ANFIS), a single Multi-Layer Perceptron (MLP) and a hybrid Multi-Layer Perceptron-Grey Wolf Optimizer (MLP-GWO). These models were evaluated for their predictive precision, using various Solar and Diffuse Fraction (DF) irradiance data, from Spain. The results were then evaluated using two frequently used evaluation criteria, the Mean Absolute Error (MAE) and the Root Mean Square Error (RMSE). The results showed that the MLP-GWO model, followed by the ANFIS model, provided a higher performance, in both the training and the testing procedures.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Generation expansion planning in the presence of wind power plants using a genetic algorithm model
Authors:
Ali Sahragard,
Hamid Falaghi,
Mahdi Farhadi,
Amir Mosavi,
Abouzar Estebsari
Abstract:
One of the essential aspects of power system planning is generation expansion planning (GEP). The purpose of GEP is to enhance construction planning and reduce the costs of installing different types of power plants. This paper proposes a method based on Genetic Algorithm (GA) for GEP in the presence of wind power plants. Since it is desired to integrate the maximum possible wind power production…
▽ More
One of the essential aspects of power system planning is generation expansion planning (GEP). The purpose of GEP is to enhance construction planning and reduce the costs of installing different types of power plants. This paper proposes a method based on Genetic Algorithm (GA) for GEP in the presence of wind power plants. Since it is desired to integrate the maximum possible wind power production in GEP, the constraints for incorporating different levels of wind energy in power generation are investigated comprehensively. This will allow obtaining the maximum reasonable amount of wind penetration in the network. Besides, due to the existence of different wind regimes, the penetration of strong and weak wind on GEP is assessed. The results show that the maximum utilization of wind power generation capacity could increase the exploitation of more robust wind regimes. Considering the growth of the wind farm industry and the cost reduction for building wind power plants, the sensitivity of GEP to the variations of this cost is investigated. The results further indicate that for a 10% reduction in the initial investment cost of wind power plants, the proposed model estimates that the overall cost will be minimized.
△ Less
Submitted 7 July, 2020;
originally announced August 2020.
-
Modeling and Uncertainty Analysis of Groundwater Level Using Six Evolutionary Optimization Algorithms Hybridized with ANFIS, SVM, and ANN
Authors:
Akram Seifi,
Mohammad Ehteram,
Vijay P. Singh,
Amir Mosavi
Abstract:
In the present study, six meta-heuristic schemes are hybridized with artificial neural network (ANN), adaptive neuro-fuzzy interface system (ANFIS), and support vector machine (SVM), to predict monthly groundwater level (GWL), evaluate uncertainty analysis of predictions and spatial variation analysis. The six schemes, including grasshopper optimization algorithm (GOA), cat swarm optimization (CSO…
▽ More
In the present study, six meta-heuristic schemes are hybridized with artificial neural network (ANN), adaptive neuro-fuzzy interface system (ANFIS), and support vector machine (SVM), to predict monthly groundwater level (GWL), evaluate uncertainty analysis of predictions and spatial variation analysis. The six schemes, including grasshopper optimization algorithm (GOA), cat swarm optimization (CSO), weed algorithm (WA), genetic algorithm (GA), krill algorithm (KA), and particle swarm optimization (PSO), were used to hybridize for improving the performance of ANN, SVM, and ANFIS models. Groundwater level (GWL) data of Ardebil plain (Iran) for a period of 144 months were selected to evaluate the hybrid models. The pre-processing technique of principal component analysis (PCA) was applied to reduce input combinations from monthly time series up to 12-month prediction intervals. The results showed that the ANFIS-GOA was superior to the other hybrid models for predicting GWL in the first piezometer and third piezometer in the testing stage. The performance of hybrid models with optimization algorithms was far better than that of classical ANN, ANFIS, and SVM models without hybridization. The percent of improvements in the ANFIS-GOA versus standalone ANFIS in piezometer 10 were 14.4%, 3%, 17.8%, and 181% for RMSE, MAE, NSE, and PBIAS in the training stage and 40.7%, 55%, 25%, and 132% in testing stage, respectively. The improvements for piezometer 6 in train step were 15%, 4%, 13%, and 208% and in the test step were 33%, 44.6%, 16.3%, and 173%, respectively, that clearly confirm the superiority of developed hybridization schemes in GWL modeling. Uncertainty analysis showed that ANFIS-GOA and SVM had, respectively, the best and worst performances among other models. In general, GOA enhanced the accuracy of the ANFIS, ANN, and SVM models.
△ Less
Submitted 28 June, 2020;
originally announced June 2020.
-
A Mobile Cloud-Based eHealth Scheme
Authors:
Yihe Liu,
Aaqif Afzaal Abbasi,
Atefeh Aghaei,
Almas Abbasi,
Amir Mosavi,
Shahab Shamshirband,
Mohammed A. A. Al-qaness
Abstract:
Mobile cloud computing is an emerging field that is gaining popularity across borders at a rapid pace. Similarly, the field of health informatics is also considered as an extremely important field. This work observes the collaboration between these two fields to solve the traditional problem of extracting Electrocardiogram signals from trace reports and then performing analysis. The developed syst…
▽ More
Mobile cloud computing is an emerging field that is gaining popularity across borders at a rapid pace. Similarly, the field of health informatics is also considered as an extremely important field. This work observes the collaboration between these two fields to solve the traditional problem of extracting Electrocardiogram signals from trace reports and then performing analysis. The developed system has two front ends, the first dedicated for the user to perform the photographing of the trace report. Once the photographing is complete, mobile computing is used to extract the signal. Once the signal is extracted, it is uploaded into the server and further analysis is performed on the signal in the cloud. Once this is done, the second interface, intended for the use of the physician, can download and view the trace from the cloud. The data is securely held using a password-based authentication method. The system presented here is one of the first attempts at delivering the total solution, and after further upgrades, it will be possible to deploy the system in a commercial setting.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Dynamic Modeling and Adaptive Controlling in GPS-Intelligent Buoy (GIB) Systems Based on Neural-Fuzzy Networks
Authors:
Dangquan Zhang,
Muhammad Aqeel Ashraf,
Zhenling Liu,
Wan-Xi Peng,
Mohammad Javad Golkar,
Amir Mosavi
Abstract:
Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control the Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural n…
▽ More
Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control the Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural network with a backstepping technique. This study aims at developing a novel controller based on an adaptive fuzzy neural network to optimally track the dynamically positioned vehicle on the water with unavailable velocities and unidentified control parameters. In order to model the network with the proposed technique, uncertainties and the unwanted disturbances are studied in the neural network. The presented study aims at developing a neural controlling which applies the vectorial back-stepping technique to the surface ships, which have been dynamically positioned with undetermined disturbances and ambivalences. Moreover, the objective function is to minimize the output error for the neural network (NN) based on the closed-loop system. The most important feature of the proposed model for the positioning buoys is its independence from comparative knowledge or information on the dynamics and the unwanted disturbances of ships. The numerical and obtained consequences demonstrate that the control system can adjust the routes and the position of the buoys to the desired objective with relatively few position errors.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
Comparative Analysis of Single and Hybrid Neuro-Fuzzy-Based Models for an Industrial Heating Ventilation and Air Conditioning Control System
Authors:
Sina Ardabili,
Bertalan Beszedes,
Laszlo Nadai,
Karoly Szell,
Amir Mosavi,
Felde Imre
Abstract:
Hybridization of machine learning methods with soft computing techniques is an essential approach to improve the performance of the prediction models. Hybrid machine learning models, particularly, have gained popularity in the advancement of the high-performance control systems. Higher accuracy and better performance for prediction models of exergy destruction and energy consumption used in the co…
▽ More
Hybridization of machine learning methods with soft computing techniques is an essential approach to improve the performance of the prediction models. Hybrid machine learning models, particularly, have gained popularity in the advancement of the high-performance control systems. Higher accuracy and better performance for prediction models of exergy destruction and energy consumption used in the control circuit of heating, ventilation, and air conditioning (HVAC) systems can be highly economical in the industrial scale to save energy. This research proposes two hybrid models of adaptive neuro-fuzzy inference system-particle swarm optimization (ANFIS-PSO), and adaptive neuro-fuzzy inference system-genetic algorithm (ANFIS-GA) for HVAC. The results are further compared with the single ANFIS model. The ANFIS-PSO model with the RMSE of 0.0065, MAE of 0.0028, and R2 equal to 0.9999, with a minimum deviation of 0.0691 (KJ/s), outperforms the ANFIS-GA and single ANFIS models.
△ Less
Submitted 22 February, 2020;
originally announced February 2020.
-
Performance Analysis of Combine Harvester using Hybrid Model of Artificial Neural Networks Particle Swarm Optimization
Authors:
Laszlo Nadai,
Felde Imre,
Sina Ardabili,
Tarahom Mesri Gundoshmian,
Pinter Gergo,
Amir Mosavi
Abstract:
Novel applications of artificial intelligence for tuning the parameters of industrial machines for optimal performance are emerging at a fast pace. Tuning the combine harvesters and improving the machine performance can dramatically minimize the wastes during harvesting, and it is also beneficial to machine maintenance. Literature includes several soft computing, machine learning and optimization…
▽ More
Novel applications of artificial intelligence for tuning the parameters of industrial machines for optimal performance are emerging at a fast pace. Tuning the combine harvesters and improving the machine performance can dramatically minimize the wastes during harvesting, and it is also beneficial to machine maintenance. Literature includes several soft computing, machine learning and optimization methods that had been used to model the function of harvesters of various crops. Due to the complexity of the problem, machine learning methods had been recently proposed to predict the optimal performance with promising results. In this paper, through proposing a novel hybrid machine learning model based on artificial neural networks integrated with particle swarm optimization (ANN-PSO), the performance analysis of a common combine harvester is presented. The hybridization of machine learning methods with soft computing techniques has recently shown promising results to improve the performance of the combine harvesters. This research aims at improving the results further by providing more stable models with higher accuracy.
△ Less
Submitted 22 February, 2020;
originally announced February 2020.
-
Evaluation of electrical efficiency of photovoltaic thermal solar collector
Authors:
Mohammad Hossein Ahmadi,
Alireza Baghban,
Milad Sadeghzadeh,
Mohammad Zamen,
Amir Mosavi,
Shahaboddin Shamshirband,
Ravinder Kumar,
Mohammad Mohammadi-Khanaposhtani
Abstract:
Solar energy is a renewable resource of energy that is broadly utilized and has the least emissions among renewable energies. In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for the thermal performance of a photovoltaic-thermal solar collector (PV/T). In the propose…
▽ More
Solar energy is a renewable resource of energy that is broadly utilized and has the least emissions among renewable energies. In this study, machine learning methods of artificial neural networks (ANNs), least squares support vector machines (LSSVM), and neuro-fuzzy are used for advancing prediction models for the thermal performance of a photovoltaic-thermal solar collector (PV/T). In the proposed models, the inlet temperature, flow rate, heat, solar radiation, and the sun heat have been considered as the inputs variables. Data set has been extracted through experimental measurements from a novel solar collector system. Different analyses are performed to examine the credibility of the introduced approaches and evaluate their performance. The proposed LSSVM model outperformed ANFIS and ANNs models. LSSVM model is reported suitable when the laboratory measurements are costly and time-consuming, or achieving such values requires sophisticated interpretations.
△ Less
Submitted 11 February, 2020;
originally announced February 2020.
-
Intelligent Road Inspection with Advanced Machine Learning; Hybrid Prediction Models for Smart Mobility and Transportation Maintenance Systems
Authors:
Nader Karballaeezadeh,
Farah Zaremotekhases,
Shahaboddin Shamshirband,
Amir Mosavi,
Narjes Nabipour,
Peter Csiba,
Annamaria R. Varkonyi-Koczy
Abstract:
Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the pr…
▽ More
Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well as their hybrids, i.e., Levenberg-Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE), and standard error (SD). The CMIS model outperforms other models with the promising results of APRE=2.3303, AAPRE=11.6768, RMSE=12.0056, and SD=0.0210.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
Hybrid Machine Learning Model of Extreme Learning Machine Radial basis function for Breast Cancer Detection and Diagnosis; a Multilayer Fuzzy Expert System
Authors:
Sanaz Mojrian,
Gergo Pinter,
Javad Hassannataj Joloudari,
Imre Felde,
Narjes Nabipour,
Laszlo Nadai,
Amir Mosavi
Abstract:
Mammography is often used as the most common laboratory method for the detection of breast cancer, yet associated with the high cost and many side effects. Machine learning prediction as an alternative method has shown promising results. This paper presents a method based on a multilayer fuzzy expert system for the detection of breast cancer using an extreme learning machine (ELM) classification m…
▽ More
Mammography is often used as the most common laboratory method for the detection of breast cancer, yet associated with the high cost and many side effects. Machine learning prediction as an alternative method has shown promising results. This paper presents a method based on a multilayer fuzzy expert system for the detection of breast cancer using an extreme learning machine (ELM) classification model integrated with radial basis function (RBF) kernel called ELM-RBF, considering the Wisconsin dataset. The performance of the proposed model is further compared with a linear-SVM model. The proposed model outperforms the linear-SVM model with RMSE, R2, MAPE equal to 0.1719, 0.9374 and 0.0539, respectively. Furthermore, both models are studied in terms of criteria of accuracy, precision, sensitivity, specificity, validation, true positive rate (TPR), and false-negative rate (FNR). The ELM-RBF model for these criteria presents better performance compared to the SVM model.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
Developing an ANFIS PSO Model to Estimate Mercury Emission in Combustion Flue Gases
Authors:
Shahaboddin Shamshirband,
Masoud Hadipoor,
Alireza Baghban,
Amir Mosavi,
Jozsef Bukor,
Annamaria Varkonyi Koczy
Abstract:
Accurate prediction of mercury content emitted from fossil fueled power stations is of utmost important for environmental pollution assessment and hazard mitigation. In this paper, mercury content in the output gas of power stations boilers was predicted using adaptive neuro fuzzy inference system method integrated with particle swarm optimization. The input parameters of the model include coal ch…
▽ More
Accurate prediction of mercury content emitted from fossil fueled power stations is of utmost important for environmental pollution assessment and hazard mitigation. In this paper, mercury content in the output gas of power stations boilers was predicted using adaptive neuro fuzzy inference system method integrated with particle swarm optimization. The input parameters of the model include coal characteristics and the operational parameters of the boilers. The dataset has been collected from a number of power plants and employed to educate and examine the proposed model. To evaluate the performance of the proposed ANFIS PSO model the statistical meter of MARE was implemented. Furthermore, relative errors between acquired data and predicted values presented, which confirm the accuracy of the model to deal nonlinearity and representing the dependency of flue gas mercury content into the specifications of coal and the boiler type.
△ Less
Submitted 16 September, 2019;
originally announced October 2019.
-
Multi-label Classification for Fault Diagnosis of Rotating Electrical Machines
Authors:
Adrienn Dineva,
Amir Mosavi,
Mate Gyimesi,
Istvan Vajda
Abstract:
Primary importance is devoted to Fault Detection and Diagnosis (FDI) of electrical machine and drive systems in modern industrial automation. The widespread use of Machine Learning techniques has made it possible to replace traditional motor fault detection techniques with more efficient solutions that are capable of early fault recognition by using large amounts of sensory data. However, the dete…
▽ More
Primary importance is devoted to Fault Detection and Diagnosis (FDI) of electrical machine and drive systems in modern industrial automation. The widespread use of Machine Learning techniques has made it possible to replace traditional motor fault detection techniques with more efficient solutions that are capable of early fault recognition by using large amounts of sensory data. However, the detection of concurrent failures is still a challenge in the presence of disturbing noises or when the multiple faults cause overlapping features. The contribution of this work is to propose a novel methodology using multi-label classification method for simultaneously diagnosing multiple faults and evaluating the fault severity under noisy conditions. Performance of various multi-label classification models are compared. Current and vibration signals are acquired under normal and fault conditions. The applicability of the proposed method is experimentally validated under diverse fault conditions such as unbalance and misalignment.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
