Showing 1–7 of 7 results for author: Mazza, A

Investigation on the Impact of Heat Waves on Distribution System Failures

Authors: Andrea Mazza, Gianfranco Chicco, Carmen L. T. Borges

Abstract: This paper discusses some aspects referring to the characterization and modelling of the resilience of distribution systems in the presence of heat waves. The aim is to identify the specific features that can lead to more detailed modelling of the impact of heat waves on the failures that happen in distribution systems. In particular, with heat waves there are differences between the cumulative di… ▽ More This paper discusses some aspects referring to the characterization and modelling of the resilience of distribution systems in the presence of heat waves. The aim is to identify the specific features that can lead to more detailed modelling of the impact of heat waves on the failures that happen in distribution systems. In particular, with heat waves there are differences between the cumulative distribution function of the time to failure in practical cases and in the theoretical reference used for reliability analysis. These differences may be considered to refine the resilience models due to heat waves. Examples taken from real cases are illustrated and commented. △ Less

Submitted 18 April, 2024; v1 submitted 24 November, 2023; originally announced November 2023.

A Feasibility Study on Opportunistic Rainfall Measurement From Satellite TV Broadcasts

Authors: Fabiola Sapienza, Giacomo Bacci, Filippo Giannetti, Vincenzo Lottici, Attilio Vaccaro, Giovanni Serafino, Alberto Ortolani, Francesca Caparrini, Andrea Antonini, Samantha Melani, Antonio Mazza, Luca Baldini, Elisa Adirosi, Luca Facheris

Abstract: Rainfall precipitation maps are usually derived based on the measurements collected by classical weather devices, such as rain gauges and weather stations. This article aims to show the benefits obtained by opportunistic rainfall measurements based on signal strength measurements provided by commercial-grade satellite terminals (e.g., used in TV broadcasting). To assess not only the feasibility of… ▽ More Rainfall precipitation maps are usually derived based on the measurements collected by classical weather devices, such as rain gauges and weather stations. This article aims to show the benefits obtained by opportunistic rainfall measurements based on signal strength measurements provided by commercial-grade satellite terminals (e.g., used in TV broadcasting). To assess not only the feasibility of this approach, with significant advantages in terms of capital and operational expenditure, but also improvements in terms of accuracy, we focus on a case study for agricultural applications using a Gaussian-modeled synthetic rain over a specific, real-world test area. △ Less

Submitted 8 March, 2023; originally announced March 2023.

Comments: 5 pages, 7 figures

Journal ref: published on URSI Radio Science Letters, vol. 4, 2022

Power-to-Gas in a gas and electricity distribution network: a sensitivity analysis of modeling approaches

Authors: Gabriele Fambri, Cesar Diaz-Londono, Andrea Mazza, Marco Badami, Robert Weiss

Abstract: Power-to-Gas (P2G) has been one of the most frequently discussed technologies in the last few years. This technology allows producing CO2 free fuels. Thanks to its high flexibility, it may offer services to the power system, fostering Variable Renewable Energy Sources (VRES) and the electricity demand match, mitigating the issues related to VRES overproduction. The role of P2G plants connected to… ▽ More Power-to-Gas (P2G) has been one of the most frequently discussed technologies in the last few years. This technology allows producing CO2 free fuels. Thanks to its high flexibility, it may offer services to the power system, fostering Variable Renewable Energy Sources (VRES) and the electricity demand match, mitigating the issues related to VRES overproduction. The role of P2G plants connected to the transmission system as flexibility asset has been extensively analyzed in the literature. Conversely, the analysis of these systems used at distribution level has only been dealt with in a few studies: however, in this case critical operation conditions can easily arise, both on electrical and gas infrastructure. This article presents a methodological analysis on the impact of different simulation approaches when P2G is installed at distribution system level. The choice of the most appropriate modeling approaches for electricity and distribution grids is required in order to avoid overestimating or underestimating the potential flexibility that P2G plants connected to distribution networks can offer. The aim of this paper is to understand the impact of different modeling approaches in order to determine whether, and under which conditions, this is acceptable. An illustrative case study has been developed to perform this kind of analysis. The results demonstrated that it is important to take into account the electric distribution network topology, as the performance of P2G plants could be affected by their placement in the network. Neglecting the dynamics of a gas network or the interactions between P2G plant components under a low gas demand condition can lead to an underestimation of the flexibility of the entire system. If the demand for gas is high enough, the use of simplified assumptions that do not consider the dynamics of the gas network and P2G systems may be acceptable. △ Less

Submitted 17 February, 2022; v1 submitted 12 January, 2022; originally announced January 2022.

Techno-economic analysis of Power-to-Gas plants in a gas and electricity distribution network system with high renewable energy penetration

Authors: Gabriele Fambri, Cesar Diaz-Londono, Andrea Mazza, Marco Badami, Teemu Sihvonen, Robert Weiss

Abstract: Distributed generation, based on the exploitation of Renewable Energy Sources (RES), has increased in the last few decades to limit anthropogenic carbon dioxide emissions, and this trend will increase in the future. However, RES generation is not dispatchable, and an increasing share of RES may lead to inefficiencies and even problems for the electricity network. Flexible resources are needed to h… ▽ More Distributed generation, based on the exploitation of Renewable Energy Sources (RES), has increased in the last few decades to limit anthropogenic carbon dioxide emissions, and this trend will increase in the future. However, RES generation is not dispatchable, and an increasing share of RES may lead to inefficiencies and even problems for the electricity network. Flexible resources are needed to handle RES generation in order to support the delicate electricity generation and demand balance. Energy conversion technologies (P2X, Power to X) allow the flexibility of energy systems to be increased. These technologies make a connection between different energy sectors (e.g., electricity and gas) possible, and thus create new synergies within an overall multi energy system. This paper analyzes how the P2G technology can be used at the distribution network level (both gas and electricity) to optimize the use of RES. In fact, in order to coordinate P2X resources, it is necessary to take into account the whole multi energy scenario, and not just the electrical side: it therefore becomes fundamental to recognize the pros and cons that Balancing Service Providers (BSPs), composed of a number of P2G plants (representing the Balancing Responsible Providers, BRPs), may have when offering services to an electricity network. Moreover, the convenience of the decarbonization of the gas grid has been evaluated through the calculation of the levelized cost of Synthetic Natural Gas (LCSNG) for cost scenarios for the years 2030 and 2050, considering different assumptions about the cost of the surplus utilization of RES. The results show that LCSNG may vary from 47 to 319 EURO/MWh, according to the different configurations, i.e., only in the best case scenario is the SNG cost comparable with the cost of natural gas, and hence does the P2G technology result to be profitable △ Less

Submitted 23 November, 2021; originally announced November 2021.

Pansharpening by convolutional neural networks in the full resolution framework

Authors: Matteo Ciotola, Sergio Vitale, Antonio Mazza, Giovanni Poggi, Giuseppe Scarpa

Abstract: In recent years, there has been a growing interest in deep learning-based pansharpening. Thus far, research has mainly focused on architectures. Nonetheless, model training is an equally important issue. A first problem is the absence of ground truths, unavoidable in pansharpening. This is often addressed by training networks in a reduced resolution domain and using the original data as ground tru… ▽ More In recent years, there has been a growing interest in deep learning-based pansharpening. Thus far, research has mainly focused on architectures. Nonetheless, model training is an equally important issue. A first problem is the absence of ground truths, unavoidable in pansharpening. This is often addressed by training networks in a reduced resolution domain and using the original data as ground truth, relying on an implicit scale invariance assumption. However, on full resolution images results are often disappointing, suggesting such invariance not to hold. A further problem is the scarcity of training data, which causes a limited generalization ability and a poor performance on off-training test images. In this paper, we propose a full-resolution training framework for deep learning-based pansharpening. The framework is fully general and can be used for any deep learning-based pansharpening model. Training takes place in the high-resolution domain, relying only on the original data, thus avoiding any loss of information. To ensure spectral and spatial fidelity, a suitable two-component loss is defined. The spectral component enforces consistency between the pansharpened output and the low-resolution multispectral input. The spatial component, computed at high-resolution, maximizes the local correlation between each pansharpened band and the panchromatic input. At testing time, the target-adaptive operating modality is adopted, achieving good generalization with a limited computational overhead. Experiments carried out on WorldView-3, WorldView-2, and GeoEye-1 images show that methods trained with the proposed framework guarantee a pretty good performance in terms of both full-resolution numerical indexes and visual quality. △ Less

Submitted 4 April, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Journal ref: IEEE Transactions on Geoscience and Remote Sensing

Evaluation of the impact of Heat-Wave on Distribution System Resilience

Authors: Andrea Mazza, Yang Zhang, Ettore Bompard, Gianfranco Chicco, Emiliano Roggero, Giuliana Galofaro

Abstract: This paper presents the findings about the impact of heat waves on a real urban distribution system. A data-driven methodology is proposed to simulate the portion of faults that can be associated to normal conditions (and hence to reliability) and the portion correlated to the heat wave occurrence. Based on real data collected in the years 2012-2017, the fault rates associated to reliability and r… ▽ More This paper presents the findings about the impact of heat waves on a real urban distribution system. A data-driven methodology is proposed to simulate the portion of faults that can be associated to normal conditions (and hence to reliability) and the portion correlated to the heat wave occurrence. Based on real data collected in the years 2012-2017, the fault rates associated to reliability and resilience have been calculated and then used to feed a Monte Carlo simulation aiming to manage the uncertainty in the fault occurrence. Finally, based on the Italian legislation, the benefits deriving by the substitution of the faulted portion of the system have been calculated. △ Less

Submitted 15 April, 2021; originally announced April 2021.

Journal ref: 2021 International Conference on Smart Energy Systems and Technologies (SEST)

New insights for setting up contractual options for demand side flexibility

Authors: Gianfranco Chicco, Andrea Mazza

Abstract: This paper exploits the Duration-of-Use of the demand patterns as a key concept for dealing with demand side flexibility. Starting from the consideration that fine-grained energy metering is not used at the point of supply of the electricity consumers, i.e., the granularity of the energy measured (at time steps of 15 minutes, 30 minutes or one hour), the event-based energy metering (EDM) is indica… ▽ More This paper exploits the Duration-of-Use of the demand patterns as a key concept for dealing with demand side flexibility. Starting from the consideration that fine-grained energy metering is not used at the point of supply of the electricity consumers, i.e., the granularity of the energy measured (at time steps of 15 minutes, 30 minutes or one hour), the event-based energy metering (EDM) is indicated as a viable option to provides a very detailed reconstruction of the demand patterns. The use of EDM enables high-quality tracking of the demand peaks with a reduced number of data with respect to the ones needed to measure energy at regular time steps for reaching a similar peak tracking capability. From the EDM outcomes, a new class of options for setting up tariffs or contracts for flexibility, based on the demand duration curve, is envisioned. △ Less

Submitted 4 September, 2019; originally announced September 2019.

Journal ref: Journal of Engineering Sciences and Innovation Vol.4, Iss. 4, 2019, pp.381-398