Showing 1–50 of 78 results for author: Latva-aho, M

Beam Squint Mitigation in Wideband Hybrid Beamformers: Full-TTD, Sparse-TTD, or Non-TTD?

Authors: Mehdi Monemi, Mehdi Rasti, Omid Yazdani, Onel Lopez, Matti Latva-aho

Abstract: Beam squint poses a fundamental challenge in wideband hybrid beamforming, particularly for mmWave and THz systems that demand both ultra-wide bandwidth and high directional beams. While conventional phase shifter-based beamformers may offer partial mitigation, True Time Delay (TTD) units provide a fundamentally more effective solution by enabling frequency-independent beam steering. However, the h… ▽ More Beam squint poses a fundamental challenge in wideband hybrid beamforming, particularly for mmWave and THz systems that demand both ultra-wide bandwidth and high directional beams. While conventional phase shifter-based beamformers may offer partial mitigation, True Time Delay (TTD) units provide a fundamentally more effective solution by enabling frequency-independent beam steering. However, the high cost of TTD units has recently driven much interest in Sparse-TTD architectures, which combine a limited number of TTDs with a higher number of conventional phase shifters to balance performance and cost. This paper provides a critical examination of beam squint mitigation strategies in wideband hybrid beamformers, comparing Full-TTD, Sparse-TTD, and Non-TTD architectures. We analyze recent Non-TTD approaches, specifically the scheme leveraging the wideband beam gain (WBBG) concept, evaluating their performance and cost characteristics against TTD-based solutions. A key focus is placed on the practical limitations of Sparse-TTD architectures, particularly the often-overlooked requirement for wideband phase shifters operating alongside TTDs, which can significantly impact performance and implementation cost in real-world scenarios, especially for ultra-wideband applications. Finally, we conduct a cost-performance analysis to examine the trade-offs inherent in each architecture and provide guidance on selecting the most suitable hybrid beamforming structure for various fractional bandwidth regimes. △ Less

Submitted 24 June, 2025; originally announced June 2025.

On the Robustness of RSMA to Adversarial BD-RIS-Induced Interference

Authors: Arthur S. de Sena, Jacek Kibilda, Nurul H. Mahmood, Andre Gomes, Luiz A. DaSilva, Matti Latva-aho

Abstract: This article investigates the robustness of rate-splitting multiple access (RSMA) in multi-user multiple-input multiple-output (MIMO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected BD-RIS architectures. Valid random reflection… ▽ More This article investigates the robustness of rate-splitting multiple access (RSMA) in multi-user multiple-input multiple-output (MIMO) systems to interference attacks against channel acquisition induced by beyond-diagonal RISs (BD-RISs). Two primary attack strategies, random and aligned interference, are proposed for fully connected and group-connected BD-RIS architectures. Valid random reflection coefficients are generated exploiting the Takagi factorization, while potent aligned interference attacks are achieved through optimization strategies based on a quadratically constrained quadratic program (QCQP) reformulation followed by projections onto the unitary manifold. Our numerical findings reveal that, when perfect channel state information (CSI) is available, RSMA behaves similarly to space-division multiple access (SDMA) and thus is highly susceptible to the attack, with BD-RIS inducing severe performance loss and significantly outperforming diagonal RIS. However, under imperfect CSI, RSMA consistently demonstrates significantly greater robustness than SDMA, particularly as the system's transmit power increases. △ Less

Submitted 26 May, 2025; originally announced May 2025.

Sense-then-Charge: Wireless Power Transfer to Unresponsive Devices with Unknown Location

Authors: Amirhossein Azarbahram, Onel L. A. López, Richard D. Souza, Petar Popovski, Matti Latva-aho

Abstract: This paper explores a multi-antenna dual-functional radio frequency (RF) wireless power transfer (WPT) and radar system to charge multiple unresponsive devices. We formulate a beamforming problem to maximize the minimum received power at the devices without prior location and channel state information (CSI) knowledge. We propose dividing transmission blocks into sensing and charging phases. First,… ▽ More This paper explores a multi-antenna dual-functional radio frequency (RF) wireless power transfer (WPT) and radar system to charge multiple unresponsive devices. We formulate a beamforming problem to maximize the minimum received power at the devices without prior location and channel state information (CSI) knowledge. We propose dividing transmission blocks into sensing and charging phases. First, the location of the devices is estimated by sending sensing signals and performing multiple signal classification and least square estimation on the received echo. Then, the estimations are used for CSI prediction and RF-WPT beamforming. Simulation results reveal that there is an optimal number of blocks allocated for sensing and charging depending on the system setup. Our sense-then-charge (STC) protocol can outperform CSI-free benchmarks and achieve near-optimal performance with a sufficient number of receive antennas and transmit power. However, STC struggles if using insufficient antennas or power as device numbers grow. △ Less

Submitted 29 April, 2025; originally announced April 2025.

Comments: 6 pages, 6 figures

Max-Min Fairness for Stacked Intelligent Metasurface-Assisted Multi-User MISO Systems

Authors: Nipuni Ginige, Prathapasinghe Dharmawansa, Arthur Sousa de Sena, Nurul Huda Mahmood, Nandana Rajatheva, Matti Latva-aho

Abstract: Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable surface layers to enable flexible wave-based beamforming. In this paper, we focus on an \ac{SIM}-assisted multi-user multiple-input single-output system, where it is essential to ensure that all users receive a fair and reliable service level. To this end, we develop two max-min fairness algorithms ba… ▽ More Stacked intelligent metasurface (SIM) is an emerging technology that uses multiple reconfigurable surface layers to enable flexible wave-based beamforming. In this paper, we focus on an \ac{SIM}-assisted multi-user multiple-input single-output system, where it is essential to ensure that all users receive a fair and reliable service level. To this end, we develop two max-min fairness algorithms based on instantaneous channel state information (CSI) and statistical CSI. For the instantaneous CSI case, we propose an alternating optimization algorithm that jointly optimizes power allocation using geometric programming and wave-based beamforming coefficients using the gradient descent-ascent method. For the statistical CSI case, since deriving an exact expression for the average minimum achievable rate is analytically intractable, we derive a tight upper bound and thereby formulate a stochastic optimization problem. This problem is then solved, capitalizing on an alternating approach combining geometric programming and gradient descent algorithms, to obtain the optimal policies. Our numerical results show significant improvements in the minimum achievable rate compared to the benchmark schemes. In particular, for the instantaneous CSI scenario, the individual impact of the optimal wave-based beamforming is significantly higher than that of the power allocation strategy. Moreover, the proposed upper bound is shown to be tight in the low signal-to-noise ratio regime under the statistical CSI. △ Less

Submitted 20 April, 2025; originally announced April 2025.

Beamforming and Waveform Optimization for RF Wireless Power Transfer with Beyond Diagonal Reconfigurable Intelligent Surfaces

Authors: Amirhossein Azarbahram, Onel L. A. Lopez, Bruno Clerckx, Marco Di Renzo, Matti Latva-Aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is a promising technology to seamlessly charge low-power devices, but its low end-to-end power transfer efficiency remains a critical challenge. To address the latter, low-cost transmit/radiating architectures, e.g., based on reconfigurable intelligent surfaces (RISs), have shown great potential. Beyond diagonal (BD) RIS is a novel branch of RIS o… ▽ More Radio frequency (RF) wireless power transfer (WPT) is a promising technology to seamlessly charge low-power devices, but its low end-to-end power transfer efficiency remains a critical challenge. To address the latter, low-cost transmit/radiating architectures, e.g., based on reconfigurable intelligent surfaces (RISs), have shown great potential. Beyond diagonal (BD) RIS is a novel branch of RIS offering enhanced performance over traditional diagonal RIS (D-RIS) in wireless communications, but its potential gains in RF-WPT remain unexplored. Motivated by this, we analyze a BD-RIS-assisted single-antenna RF-WPT system to charge a single rectifier, and formulate a joint beamforming and multi-carrier waveform optimization problem aiming to maximize the harvested power. We propose two solutions relying on semi-definite programming for fully connected BD-RIS and an efficient low-complexity iterative method relying on successive convex approximation. Numerical results show that the proposed algorithms converge to a local optimum and that adding transmit sub-carriers or RIS elements improves the harvesting performance. We show that the transmit power budget impacts the relative power allocation among different sub-carriers depending on the rectifier's operating regime, while BD-RIS shapes the cascade channel differently for frequency-selective and flat scenarios. Finally, we verify by simulation that BD-RIS and D-RIS achieve the same performance under pure far-field line-of-sight conditions (in the absence of mutual coupling). Meanwhile, BD-RIS outperforms D-RIS as the non-line-of-sight components of the channel become dominant. △ Less

Submitted 26 February, 2025; originally announced February 2025.

Comments: arXiv admin note: text overlap with arXiv:2501.01787

Highly Dynamic and Flexible Spatio-Temporal Spectrum Management with AI-Driven O-RAN: A Multi-Granularity Marketplace Framework

Authors: Mehdi Rasti, Elaheh Ataeebojd, Shiva Kazemi Taskooh, Mehdi Monemi, Siavash Razmi, Matti Latva-aho

Abstract: Current spectrum-sharing frameworks struggle with adaptability, often being either static or insufficiently dynamic. They primarily emphasize temporal sharing while overlooking spatial and spectral dimensions. We propose an adaptive, AI-driven spectrum-sharing framework within the O-RAN architecture, integrating discriminative and generative AI (GenAI) to forecast spectrum needs across multiple ti… ▽ More Current spectrum-sharing frameworks struggle with adaptability, often being either static or insufficiently dynamic. They primarily emphasize temporal sharing while overlooking spatial and spectral dimensions. We propose an adaptive, AI-driven spectrum-sharing framework within the O-RAN architecture, integrating discriminative and generative AI (GenAI) to forecast spectrum needs across multiple timescales and spatial granularities. A marketplace model, managed by an authorized spectrum broker, enables operators to trade spectrum dynamically, balancing static assignments with real-time trading. GenAI enhances traffic prediction, spectrum estimation, and allocation, optimizing utilization while reducing costs. This modular, flexible approach fosters operator collaboration, maximizing efficiency and revenue. A key research challenge is refining allocation granularity and spatio-temporal dynamics beyond existing models. △ Less

Submitted 19 February, 2025; originally announced February 2025.

Uplink Rate Splitting Multiple Access with Imperfect Channel State Information and Interference Cancellation

Authors: Farjam Karim, Nurul Huda Mahmood, Arthur S. de Sena, Deepak Kumar, Bruno Clerckx, Matti Latva-aho

Abstract: This article investigates the performance of uplink rate splitting multiple access (RSMA) in a two-user scenario, addressing an under-explored domain compared to its downlink counterpart. With the increasing demand for uplink communication in applications like the Internet-of-Things, it is essential to account for practical imperfections, such as inaccuracies in channel state information at the re… ▽ More This article investigates the performance of uplink rate splitting multiple access (RSMA) in a two-user scenario, addressing an under-explored domain compared to its downlink counterpart. With the increasing demand for uplink communication in applications like the Internet-of-Things, it is essential to account for practical imperfections, such as inaccuracies in channel state information at the receiver (CSIR) and limitations in successive interference cancellation (SIC), to provide realistic assessments of system performance. Specifically, we derive closed-form expressions for the outage probability, throughput, and asymptotic outage behavior of uplink users, considering imperfect CSIR and SIC. We validate the accuracy of these derived expressions using Monte Carlo simulations. Our findings reveal that at low transmit power levels, imperfect CSIR significantly affects system performance more severely than SIC imperfections. However, as the transmit power increases, the impact of imperfect CSIR diminishes, while the influence of SIC imperfections becomes more pronounced. Moreover, we highlight the impact of the rate allocation factor on user performance. Finally, our comparison with non-orthogonal multiple access (NOMA) highlights the outage performance trade-offs between RSMA and NOMA. RSMA proves to be more effective in managing imperfect CSIR and enhances performance through strategic message splitting, resulting in more robust communication. △ Less

Submitted 31 January, 2025; originally announced January 2025.

Higher-Order Meta Distribution Reliability Analysis of Wireless Networks

Authors: Mehdi Monemi, Mehdi Rasti, S. Ali Mousavi, Matti Latva-aho, Martin Haenggi

Abstract: Communication reliability, as defined by 3GPP, refers to the probability of providing a desired quality of service (QoS). This metric is typically quantified for wireless networks by averaging the QoS success indicator over spatial and temporal random variables. Recently, the meta distribution (MD) has emerged as a two-level performance analysis tool for wireless networks, offering a detailed exam… ▽ More Communication reliability, as defined by 3GPP, refers to the probability of providing a desired quality of service (QoS). This metric is typically quantified for wireless networks by averaging the QoS success indicator over spatial and temporal random variables. Recently, the meta distribution (MD) has emerged as a two-level performance analysis tool for wireless networks, offering a detailed examination of the outer level (i.e., system-level) reliability versus the inner level (i.e., link-level) reliability thresholds. Most existing studies focus on first-order spatiotemporal MD reliability analyses, and the benefits of leveraging MD reliability for applications beyond this structure remain unexplored, a gap addressed in this paper. We propose a framework for the analysis of higher-order MD reliability of wireless networks considering different levels of temporal dynamicity of random elements in the network where the MD at each layer is leveraged to be used in calculating the MD of the higher layer. We then provide two applications for this framework and provide a detailed analytical and numerical study of the higher-order MD reliability for both examples. The results demonstrate the value of the hierarchical representation of MD reliability across three domains and the impact of the inner-layers target reliabilities on the overall MD reliability measure. △ Less

Submitted 8 May, 2025; v1 submitted 24 January, 2025; originally announced January 2025.

Interference Prediction Using Gaussian Process Regression and Management Framework for Critical Services in Local 6G Networks

Authors: Syed Luqman Shah, Nurul Huda Mahmood, Matti Latva-aho

Abstract: Interference prediction and resource allocation are critical challenges in mission-critical applications where stringent latency and reliability constraints must be met. This paper proposes a novel Gaussian process regression (GPR)-based framework for predictive interference management and resource allocation in future 6G networks. Firstly, the received interference power is modeled as a Gaussian… ▽ More Interference prediction and resource allocation are critical challenges in mission-critical applications where stringent latency and reliability constraints must be met. This paper proposes a novel Gaussian process regression (GPR)-based framework for predictive interference management and resource allocation in future 6G networks. Firstly, the received interference power is modeled as a Gaussian process, enabling both the prediction of future interference values and their corresponding estimation of uncertainty bounds. Differently from conventional machine learning methods that extract patterns from a given set of data without any prior belief, a Gaussian process assigns probability distributions to different functions that possibly represent the data set which can be further updates using Bayes' rule as more data points are observed. For instance, unlike deep neural networks, the GPR model requires only a few sample points to update its prior beliefs in real-time. Furthermore, we propose a proactive resource allocation scheme that dynamically adjusts resources according to predicted interference. The performance of the proposed approach is evaluated against two benchmarks prediction schemes, a moving average-based estimator and the ideal genie-aided estimator. The GPR-based method outperforms the moving average-based estimator and achieves near-optimal performance, closely matching the genie-aided benchmark. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Comments: Accepted in IEEE WCNC 2025

Journal ref: 2025 IEEE Wireless Communications and Networking Conference (WCNC)

A Federated Deep Learning Framework for Cell-Free RSMA Networks

Authors: S. Ali Mousavi, Mehdi Monemi, Reza Mohseni, Matti Latva-aho

Abstract: Next-generation wireless networks are poised to benefit significantly from the integration of three key technologies (KTs): Rate-Splitting Multiple Access (RSMA), cell-free architectures, and federated learning. Each of these technologies offers distinct advantages in terms of security, robustness, and distributed structure. In this paper, we propose a novel cell-free network architecture that inc… ▽ More Next-generation wireless networks are poised to benefit significantly from the integration of three key technologies (KTs): Rate-Splitting Multiple Access (RSMA), cell-free architectures, and federated learning. Each of these technologies offers distinct advantages in terms of security, robustness, and distributed structure. In this paper, we propose a novel cell-free network architecture that incorporates RSMA and employs machine learning techniques within a federated framework. This combination leverages the strengths of each KT, creating a synergistic effect that maximizes the benefits of security, robustness, and distributed structure. We formally formulate the access point (AP) selection and precoder design for max-min rate optimization in a cell-free MIMO RSMA network. Our proposed solution scheme involves a three-block procedure. The first block trains deep reinforcement learning (DRL) neural networks to obtain RSMA precoders, assuming full connectivity between APs and user equipments (UEs). The second block uses these precoders and principal component analysis (PCA) to assign APs to UEs by removing a subset of AP-UE connections. The final block fine-tunes the RSMA precoders by incorporating the associated APs into a second DRL network. To leverage the distributed nature of the cell-free network, this process is implemented in a Federated Deep Reinforcement Learning (FDRL) structure operating through the cooperation of APs and a central processing unit (CPU). Simulation results demonstrate that the proposed FDRL approach performs comparably to a benchmark centralized DRL scheme. Our FDRL approach, provides a balanced trade-off, maintaining high performance with enhanced security and reduced processing demands. △ Less

Submitted 13 January, 2025; originally announced January 2025.

Beyond Diagonal Reconfigurable Intelligent Surfaces for Multi-Carrier RF Wireless Power Transfer

Authors: Amirhossein Azarbahram, Onel L. A. López, Bruno Clerckx, Marco Di Renzo, Matti Latva-aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is promising for promoting sustainability in future wireless systems, but its low end-to-end power transfer efficiency is a critical challenge. For this, reconfigurable intelligent surfaces (RISs) can be leveraged to enhance efficiency by providing nearly passive beamforming gains. Beyond diagonal (BD) RIS is a new RIS variant offering greater per… ▽ More Radio frequency (RF) wireless power transfer (WPT) is promising for promoting sustainability in future wireless systems, but its low end-to-end power transfer efficiency is a critical challenge. For this, reconfigurable intelligent surfaces (RISs) can be leveraged to enhance efficiency by providing nearly passive beamforming gains. Beyond diagonal (BD) RIS is a new RIS variant offering greater performance benefits than traditional diagonal RIS (D-RIS), though its potential for RF-WPT remains unexplored. Motivated by this, we consider a single-input single-output BD-RIS-aided RF-WPT system and we formulate a joint beamforming and waveform optimization problem aiming to maximize the harvested power at the receiver. We propose an optimization framework relying on successive convex approximation, alternating optimization, and semi-definite relaxation. Numerical results show that increasing the number of transmit sub-carriers or RIS elements improves the harvested power. We verify by simulation that BD-RIS leads to the same performance as D-RIS under far-field line-of-sight conditions (in the absence of mutual coupling), while it outperforms D-RIS as the non-line-of-sight components become dominant. △ Less

Submitted 3 January, 2025; originally announced January 2025.

Efficient Channel Prediction for Beyond Diagonal RIS-Assisted MIMO Systems with Channel Aging

Authors: Nipuni Ginige, Arthur Sousa de Sena, Nurul Huda Mahmood, Nandana Rajatheva, Matti Latva-aho

Abstract: Novel reconfigurable intelligent surface (RIS) architectures, known as beyond diagonal RISs (BD-RISs), have been proposed to enhance reflection efficiency and expand RIS capabilities. However, their passive nature, non-diagonal reflection matrix, and the large number of coupled reflecting elements complicate the channel state information (CSI) estimation process. The challenge further escalates in… ▽ More Novel reconfigurable intelligent surface (RIS) architectures, known as beyond diagonal RISs (BD-RISs), have been proposed to enhance reflection efficiency and expand RIS capabilities. However, their passive nature, non-diagonal reflection matrix, and the large number of coupled reflecting elements complicate the channel state information (CSI) estimation process. The challenge further escalates in scenarios with fast-varying channels. In this paper, we address this challenge by proposing novel joint channel estimation and prediction strategies with low overhead and high accuracy for two different RIS architectures in a BD-RIS-assisted multiple-input multiple-output system under correlated fast-fading environments with channel aging. The channel estimation procedure utilizes the Tucker2 decomposition with bilinear alternative least squares, which is exploited to decompose the cascade channels of the BD-RIS-assisted system into effective channels of reduced dimension. The channel prediction framework is based on a convolutional neural network combined with an autoregressive predictor. The estimated/predicted CSI is then utilized to optimize the RIS phase shifts aiming at the maximization of the downlink sum rate. Insightful simulation results demonstrate that our proposed approach is robust to channel aging, and exhibits a high estimation accuracy. Moreover, our scheme can deliver a high average downlink sum rate, outperforming other state-of-the-art channel estimation methods. The results also reveal a remarkable reduction in pilot overhead of up to 98\% compared to baseline schemes, all imposing low computational complexity. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: arXiv admin note: text overlap with arXiv:2406.07387

A Study on Characterization of Near-Field Sub-Regions For Phased-Array Antennas

Authors: Mehdi Monemi, Sirous Bahrami, Mehdi Rasti, Matti Latva-aho

Abstract: We characterize three near-field sub-regions for phased array antennas by elaborating on the boundaries {\it Fraunhofer}, {\it radial-focal}, and {\it non-radiating} distances. The {\it Fraunhofer distance} which is the boundary between near and far field has been well studied in the literature on the principal axis (PA) of single-element center-fed antennas, where PA denotes the axis perpendicula… ▽ More We characterize three near-field sub-regions for phased array antennas by elaborating on the boundaries {\it Fraunhofer}, {\it radial-focal}, and {\it non-radiating} distances. The {\it Fraunhofer distance} which is the boundary between near and far field has been well studied in the literature on the principal axis (PA) of single-element center-fed antennas, where PA denotes the axis perpendicular to the antenna surface passing from the antenna center. The results are also valid for phased arrays if the PA coincides with the boresight, which is not commonly the case in practice. In this work, we completely characterize the Fraunhofer distance by considering various angles between the PA and the boresight. For the {\it radial-focal distance}, below which beamfocusing is feasible in the radial domain, a formal characterization of the corresponding region based on the general model of near-field channels (GNC) is missing in the literature. We investigate this and elaborate that the maximum-ratio-transmission (MRT) beamforming based on the simple uniform spherical wave (USW) channel model results in a radial gap between the achieved and the desired focal points. While the gap vanishes when the array size $N$ becomes sufficiently large, we propose a practical algorithm to remove this gap in the non-asymptotic case when $N$ is not very large. Finally, the {\it non-radiating} distance, below which the reactive power dominates active power, has been studied in the literature for single-element antennas. We analytically explore this for phased arrays and show how different excitation phases of the antenna array impact it. We also clarify some misconceptions about the non-radiating and Fresnel distances prevailing in the literature. △ Less

Submitted 23 October, 2024; originally announced November 2024.

Revisiting the Fraunhofer and Fresnel Boundaries for Phased Array Antennas

Authors: Mehdi Monemi, Mehdi Rasti, Matti Latva-aho

Abstract: This paper presents the characterization of near-field propagation regions for phased array antennas, with a particular focus on the propagation boundaries defined by Fraunhofer and Fresnel distances. These distances, which serve as critical boundaries for understanding signal propagation behavior, have been extensively studied and characterized in the literature for single-element antennas. Howev… ▽ More This paper presents the characterization of near-field propagation regions for phased array antennas, with a particular focus on the propagation boundaries defined by Fraunhofer and Fresnel distances. These distances, which serve as critical boundaries for understanding signal propagation behavior, have been extensively studied and characterized in the literature for single-element antennas. However, the direct application of these results to phased arrays, a common practice in the field, is argued to be invalid and non-exact. This work calls for a deeper understanding of near-field propagation to accurately characterize such boundaries around phased array antennas. More specifically, for a single-element antenna, the Fraunhofer distance is $d^{\mathrm{F}}=2D^2 \sin^2(θ)/λ$ where $D$ represents the largest dimension of the antenna, $λ$ is the wavelength and $θ$ denotes the observation angle. We show that for phased arrays, $d^{\mathrm{F}}$ experiences a fourfold increase (i.e., $d^{\mathrm{F}}=8D^2 \sin^2(θ)/λ$) provided that $|θ-\fracπ{2}|>θ^F$ (which holds for most practical scenarios), where $θ^F$ is a small angle whose value depends on the number of array elements, and for the case $|θ-\fracπ{2}|\leqθ^F$, we have $d^{\mathrm{F}}\in[2D^2/λ,8D^2\cos^2(θ^F)/λ]$, where the precise value is obtained according to some square polynomial function $\widetilde{F}(θ)$. Besides, we also prove that the Fresnel distance for phased array antennas is given by $d^{\mathrm{N}}=1.75 \sqrt{{D^3}/λ}$ which is $\sqrt{8}$ times greater than the corresponding distance for a conventional single-element antenna with the same dimension. △ Less

Submitted 21 October, 2024; originally announced November 2024.

Discontinuous Reception with Adjustable Inactivity Timer for IIoT

Authors: David E. Ruíz-Guirola, Carlos A. Rodríguez-López, Onel L. A. López, Samuel Montejo-Sánchez, Vitalio Alfonso Reguera, Matti Latva-aho

Abstract: Discontinuous reception (DRX) is a key technology for reducing the energy consumption of industrial Internet of Things (IIoT) devices. Specifically, DRX allows the devices to operate in a low-power mode when no data reception is scheduled, and its effectiveness depends on the proper configuration of the DRX parameters. In this paper, we characterize the DRX process departing from a semi-Markov cha… ▽ More Discontinuous reception (DRX) is a key technology for reducing the energy consumption of industrial Internet of Things (IIoT) devices. Specifically, DRX allows the devices to operate in a low-power mode when no data reception is scheduled, and its effectiveness depends on the proper configuration of the DRX parameters. In this paper, we characterize the DRX process departing from a semi-Markov chain modeling. We detail two ways to set DRX parameters to minimize the device power consumption while meeting a mean delay constraint. The first method exhaustively searches for the optimal configuration. In contrast, the second method uses a low-complexity metaheuristic to find a sub-optimal configuration, thus considering ideal and practical DRX configurations. Notably, within the DRX parameters, the inactivity timer (IT) is a caution time that specifies how long a device remains active after the last information exchange. Traditionally, a device implementing DRX will restart the IT after each data reception as a precedent to a low-power mode. The usual approach lies in restarting the IT whenever new data is received during this cautious period, which might sometimes needlessly extend the active time. Herein, we propose a more efficient method in which the transmit base station (BS) explicitly indicates restarting the timer through the control channel only when appropriate. The decision is taken based on the BS's knowledge about its buffer status. We consider Poisson and bursty traffic models, which are typical in IIoT setups, and verify the suitability of our proposal for reducing the energy consumption of the devices without significantly compromising the communication latency through extensive numerical simulations. Specifically, energy-saving gains of up to 30% can be obtained regardless of the arrival rate and delay constraints. △ Less

Submitted 26 September, 2024; originally announced September 2024.

Comments: IEEE Transactions on Industrial Informatics (2024)

Practical Challenges for Reliable RIS Deployment in Heterogeneous Multi-Operator Multi-Band Networks

Authors: Mehdi Monemi, Mehdi Rasti, Arthur S. de Sena, Mohammad Amir Fallah, Matti Latva-Aho, Marco Di Renzo

Abstract: Reconfigurable intelligent surfaces (RISs) have been introduced as arrays of nearly passive elements with software-tunable electromagnetic properties to dynamically manipulate the reflection/transmission of radio signals. Research works in this area are focused on two applications, namely {\it user-assist} RIS aiming at tuning the RIS to enhance the quality-of-service (QoS) of target users, and th… ▽ More Reconfigurable intelligent surfaces (RISs) have been introduced as arrays of nearly passive elements with software-tunable electromagnetic properties to dynamically manipulate the reflection/transmission of radio signals. Research works in this area are focused on two applications, namely {\it user-assist} RIS aiming at tuning the RIS to enhance the quality-of-service (QoS) of target users, and the {\it malicious} RIS aiming for an attacker to degrade the QoS at victim receivers through generating {\it intended} destructive interference. While both user-assist and malicious RIS applications have been explored extensively, the impact of RIS deployments on imposing {\it unintended} interference on various wireless user-equipments (EUs) remains underexplored. This paper investigates the challenges of integrating RISs into multi-carrier, multi-user, and multi-operator networks. We discuss how RIS deployments intended to benefit specific users can negatively impact other users served at various carrier frequencies through different network operators. While not an ideal solution, we discuss how ultra-narrowband metasurfaces can be incorporated into the manufacturing of RISs to mitigate some challenges of RIS deployment in wireless networks. We also present a simulation scenario to illuminate some practical challenges associated with the deployment of RISs in shared public environments. △ Less

Submitted 29 June, 2025; v1 submitted 28 August, 2024; originally announced August 2024.

Malicious RIS Meets RSMA: Unveiling the Robustness of Rate Splitting to RIS-Induced Attacks

Authors: A. S. de Sena, A. Gomes, J. Kibiłda, N. H. Mahmood, L. A. DaSilva, M. Latva-aho

Abstract: While the robustness of rate-splitting multiple access (RSMA) to imperfect channel state information (CSI) is well-documented, its susceptibility to attacks launched with malicious reconfigurable intelligent surfaces (RISs) remains unexplored. This paper fills this gap by investigating three potential RIS-induced attacks against RSMA in a multi-user multiple-input multiple-output (MIMO) network: r… ▽ More While the robustness of rate-splitting multiple access (RSMA) to imperfect channel state information (CSI) is well-documented, its susceptibility to attacks launched with malicious reconfigurable intelligent surfaces (RISs) remains unexplored. This paper fills this gap by investigating three potential RIS-induced attacks against RSMA in a multi-user multiple-input multiple-output (MIMO) network: random interference, aligned interference, and mitigation attack. The random interference attack employs random RIS coefficients to disrupt RSMA. The other two attacks are triggered by optimizing the RIS through weighted-sum strategies based on the projected gradient method. Simulation results reveal significant degradation caused by all the attacks under perfect CSI conditions. Remarkably, when imperfect CSI is considered, RSMA, owing to its flexible power allocation strategy designed to counter CSI-related interference, can be robust to the attacks even when the base station is blind to them. It is also shown that RSMA can significantly outperform conventional space-division multiple access (SDMA). △ Less

Submitted 23 August, 2024; originally announced August 2024.

Comments: Accepted in IEEE Global Communications Conference (GLOBECOM), Dec. 2024, Cape Town, South Africa

Machine Learning-Based Channel Prediction for RIS-assisted MIMO Systems With Channel Aging

Authors: Nipuni Ginige, Arthur Sousa de Sena, Nurul Huda Mahmood, Nandana Rajatheva, Matti Latva-aho

Abstract: Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology to enhance the performance of sixth-generation (6G) and beyond communication systems. The passive nature of RISs and their large number of reflecting elements pose challenges to the channel estimation process. The associated complexity further escalates when the channel coefficients are fast-varying as in scenarios w… ▽ More Reconfigurable intelligent surfaces (RISs) have emerged as a promising technology to enhance the performance of sixth-generation (6G) and beyond communication systems. The passive nature of RISs and their large number of reflecting elements pose challenges to the channel estimation process. The associated complexity further escalates when the channel coefficients are fast-varying as in scenarios with user mobility. In this paper, we propose an extended channel estimation framework for RIS-assisted multiple-input multiple-output (MIMO) systems based on a convolutional neural network (CNN) integrated with an autoregressive (AR) predictor. The implemented framework is designed for identifying the aging pattern and predicting enhanced estimates of the wireless channels in correlated fast-fading environments. Insightful simulation results demonstrate that our proposed CNN-AR approach is robust to channel aging, exhibiting a high-precision estimation accuracy. The results also show that our approach can achieve high spectral efficiency and low pilot overhead compared to traditional methods. △ Less

Submitted 9 May, 2024; originally announced June 2024.

Goal-Oriented Sensor Reporting Scheduling for Non-linear Dynamic System Monitoring

Authors: Prasoon Raghuwanshi, Onel Luis Alcaraz López, Vimal Bhatia, Matti Latva-aho

Abstract: Goal-oriented communication (GoC) is a form of semantic communication where the effectiveness of information transmission is measured by its impact on achieving the desired goal. In the context of the Internet of Things (IoT), GoC can make IoT sensors to selectively transmit data pertinent to the intended goals of the receiver. Therefore, GoC holds significant value for IoT networks as it facilita… ▽ More Goal-oriented communication (GoC) is a form of semantic communication where the effectiveness of information transmission is measured by its impact on achieving the desired goal. In the context of the Internet of Things (IoT), GoC can make IoT sensors to selectively transmit data pertinent to the intended goals of the receiver. Therefore, GoC holds significant value for IoT networks as it facilitates timely decision-making at the receiver, reduces network congestion, and enhances spectral efficiency. In this paper, we consider a scenario where an edge node polls sensors monitoring the state of a non-linear dynamic system (NLDS) to respond to the queries of several clients. Our work delves into the foregoing GoC problem, which we term goal-oriented scheduling (GoS). Our proposed GoS utilizes deep reinforcement learning (DRL) with meticulously devised action space, state space, and reward function. The devised action space and reward function play a pivotal role in reducing the number of sensor transmissions. Meanwhile, the devised state space empowers our DRL scheduler to poll the sensor whose observation is expected to minimize the mean square error (MSE) of the query responses. Our numerical analysis demonstrates that the proposed GoS can either effectively minimize the query response MSE further or obtain a resembling MSE compared to benchmark scheduling methods, depending on the type of query. Furthermore, the proposed GoS proves to be energy-efficient for the sensors and of lower complexity compared to benchmark scheduling methods. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Near-Field Spot Beamfocusing: A Correlation-Aware Transfer Learning Approach

Authors: Mohammad Amir Fallah, Mehdi Monemi, Mehdi Rasti, Matti Latva-Aho

Abstract: Three-dimensional (3D) spot beamfocusing (SBF), in contrast to conventional angular-domain beamforming, concentrates radiating power within a very small volume in both radial and angular domains in the near-field zone. Recently the implementation of channel-state-information (CSI)-independent machine learning (ML)-based approaches have been developed for effective SBF using extremely large-scale p… ▽ More Three-dimensional (3D) spot beamfocusing (SBF), in contrast to conventional angular-domain beamforming, concentrates radiating power within a very small volume in both radial and angular domains in the near-field zone. Recently the implementation of channel-state-information (CSI)-independent machine learning (ML)-based approaches have been developed for effective SBF using extremely large-scale programmable metasurface (ELPMs). These methods involve dividing the ELPMs into subarrays and independently training them with Deep Reinforcement Learning to jointly focus the beam at the desired focal point (DFP). This paper explores near-field SBF using ELPMs, addressing challenges associated with lengthy training times resulting from independent training of subarrays. To achieve a faster CSI-independent solution, inspired by the correlation between the beamfocusing matrices of the subarrays, we leverage transfer learning techniques. First, we introduce a novel similarity criterion based on the phase distribution image (PDI) of subarray apertures. Then we devise a subarray policy propagation scheme that transfers the knowledge from trained to untrained subarrays. We further enhance learning by introducing quasi-liquid layers as a revised version of the adaptive policy reuse technique. We show through simulations that the proposed scheme improves the training speed about 5 times. Furthermore, for dynamic DFP management, we devised a DFP policy blending process, which augments the convergence rate up to 8-fold. △ Less

Submitted 16 December, 2024; v1 submitted 21 May, 2024; originally announced May 2024.

End-to-End Waveform and Beamforming Optimization for RF Wireless Power Transfer

Authors: Abdul Basit Khattak, Onel L. A. López, Amirhossein Azarbahram, Deepak Kumar, Matti Latva-aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power ampl… ▽ More Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power amplifier, and rectenna. Optimizing PTE requires careful consideration of these factors, motivating the current work. Herein, we consider an analog multi-antenna power transmitter that aims to charge a single energy harvester. We first provide a mathematical framework to calculate the harvested power from multi-tone signal transmissions and the system power consumption. Then, we formulate the joint waveform and analog beamforming design problem to minimize power consumption and meet the charging requirements. Finally, we propose an optimization approach relying on swarm intelligence to solve the specified problem. Simulation results quantify the power consumption reduction as the DAC, phase shifters resolution, and antenna length are increased, while it is seen that increasing system frequency results in higher power consumption. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: Conference

Deep Reinforcement Learning for Multi-User RF Charging with Non-linear Energy Harvesters

Authors: Amirhossein Azarbahram, Onel L. A. López, Petar Popovski, Shashi Raj Pandey, Matti Latva-aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is a promising technology for sustainable support of massive Internet of Things (IoT). However, RF-WPT systems are characterized by low efficiency due to channel attenuation, which can be mitigated by precoders that adjust the transmission directivity. This work considers a multi-antenna RF-WPT system with multiple non-linear energy harvesting (EH… ▽ More Radio frequency (RF) wireless power transfer (WPT) is a promising technology for sustainable support of massive Internet of Things (IoT). However, RF-WPT systems are characterized by low efficiency due to channel attenuation, which can be mitigated by precoders that adjust the transmission directivity. This work considers a multi-antenna RF-WPT system with multiple non-linear energy harvesting (EH) nodes with energy demands changing over discrete time slots. This leads to the charging scheduling problem, which involves choosing the precoders at each slot to minimize the total energy consumption and meet the EH requirements. We model the problem as a Markov decision process and propose a solution relying on a low-complexity beamforming and deep deterministic policy gradient (DDPG). The results show that the proposed beamforming achieves near-optimal performance with low computational complexity, and the DDPG-based approach converges with the number of episodes and reduces the system's power consumption, while the outage probability and the power consumption increase with the number of devices. △ Less

Submitted 7 May, 2024; originally announced May 2024.

Comments: 6 pages, 5 figures

Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC with the Orthogonal Matching Pursuit

Authors: Gabriel Martins de Jesus, Onel Luis Alcaraz Lopez, Richard Demo Souza, Nurul Huda Mahmood, Markku Juntti, Matti Latva-Aho

Abstract: Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsi… ▽ More Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement. △ Less

Submitted 12 February, 2025; v1 submitted 8 February, 2024; originally announced February 2024.

Comments: 6 pages, 6 figures. Paper presented at the IEEE Global Communications Conference (GLOBECOM), Cape Town, South Africa, 2024

Towards Near-Field 3D Spot Beamfocusing: Possibilities, Challenges, and Use-cases

Authors: Mehdi Monemi, Mohammad Amir Fallah, Mehdi Rasti, Matti Latva-Aho, Merouane Debbah

Abstract: Spot beamfocusing (SBF) is the process of focusing the signal power in a small spot-like region in the 3D space, which can be either hard-tuned (HT) using traditional tools like lenses and mirrors or electronically reconfigured (ER) using modern large-scale intelligent surface phased arrays. ER-SBF can be a key enabling technology (KET) for the next-generation 6G wireless networks offering benefit… ▽ More Spot beamfocusing (SBF) is the process of focusing the signal power in a small spot-like region in the 3D space, which can be either hard-tuned (HT) using traditional tools like lenses and mirrors or electronically reconfigured (ER) using modern large-scale intelligent surface phased arrays. ER-SBF can be a key enabling technology (KET) for the next-generation 6G wireless networks offering benefits to many future wireless application areas such as wireless communication and security, mid-range high-power and safe wireless chargers, medical and health, physics, etc. Although near-field HT-SBF and ER-beamfocusing have been studied in the literature and applied in the industry, there is no comprehensive study of different aspects of ER-SBF and its future applications, especially for nonoptical (mmWave, sub-THz, and THz) electromagnetic waves in the next generation wireless technology, which is the aim of this paper. The theoretical concepts behind ER-SBF, different antenna technologies for implementing ER-SBF, employing machine learning (ML)-based schemes for enabling channel-state-information (CSI)-independent ER-SBF, and different practical application areas that can benefit from ER-SBF will be explored. △ Less

Submitted 19 August, 2024; v1 submitted 24 December, 2023; originally announced January 2024.

Malicious RIS versus Massive MIMO: Securing Multiple Access against RIS-based Jamming Attacks

Authors: Arthur Sousa de Sena, Jacek Kibilda, Nurul Huda Mahmood, André Gomes, Matti Latva-aho

Abstract: In this letter, we study an attack that leverages a reconfigurable intelligent surface (RIS) to induce harmful interference toward multiple users in massive multiple-input multiple-output (mMIMO) systems during the data transmission phase. We propose an efficient and flexible weighted-sum projected gradient-based algorithm for the attacker to optimize the RIS reflection coefficients without knowin… ▽ More In this letter, we study an attack that leverages a reconfigurable intelligent surface (RIS) to induce harmful interference toward multiple users in massive multiple-input multiple-output (mMIMO) systems during the data transmission phase. We propose an efficient and flexible weighted-sum projected gradient-based algorithm for the attacker to optimize the RIS reflection coefficients without knowing legitimate user channels. To counter such a threat, we propose two reception strategies. Simulation results demonstrate that our malicious algorithm outperforms baseline strategies while offering adaptability for targeting specific users. At the same time, our results show that our mitigation strategies are effective even if only an imperfect estimate of the cascade RIS channel is available. △ Less

Submitted 13 January, 2024; originally announced January 2024.

Beyond Diagonal RIS for Multi-Band Multi-Cell MIMO Networks: A Practical Frequency-Dependent Model and Performance Analysis

Authors: Arthur S. de Sena, Mehdi Rasti, Nurul H. Mahmood, Matti Latva-aho

Abstract: This paper delves into the unexplored frequency-dependent characteristics of beyond diagonal reconfigurable intelligent surfaces (BD-RISs). A generalized practical frequency-dependent reflection model is proposed as a fundamental framework for configuring fully-connected and group-connected RISs in a multi-band multi-base station (BS) multiple-input multiple-output (MIMO) network. Leveraging this… ▽ More This paper delves into the unexplored frequency-dependent characteristics of beyond diagonal reconfigurable intelligent surfaces (BD-RISs). A generalized practical frequency-dependent reflection model is proposed as a fundamental framework for configuring fully-connected and group-connected RISs in a multi-band multi-base station (BS) multiple-input multiple-output (MIMO) network. Leveraging this practical model, multi-objective optimization strategies are formulated to maximize the received power at multiple users connected to different BSs, each operating under a distinct carrier frequency. By relying on matrix theory and exploiting the symmetric structure of the reflection matrices inherent to BD-RISs, relaxed tractable versions of the challenging problems are achieved for scenarios with obstructed and unobstructed direct channel links. The relaxed solutions are then combined with codebook-based approaches to configure the practical capacitance values for the BD-RISs. Simulation results reveal the frequency-dependent behaviors of different RIS architectures and demonstrate the effectiveness of the proposed schemes. Notably, BD-RISs exhibit high reflection performance across the intended frequency range, remarkably outperforming conventional single-connected RISs. Moreover, the proposed optimization approaches prove effective in enabling the targeted operation of BD-RISs across one or more carrier frequencies. The results also shed light on the potential for harmful interference in the absence of synchronization between RISs and adjacent BSs. △ Less

Submitted 24 June, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Channel Scheduling for IoT Access with Spatial Correlation

Authors: Prasoon Raghuwanshi, Onel Luis Alcaraz López, Petar Popovski, Matti Latva-aho

Abstract: Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among de… ▽ More Spatially correlated device activation is a typical feature of the Internet of Things (IoT). This motivates the development of channel scheduling (CS) methods that mitigate device collisions efficiently in such scenarios, which constitutes the scope of this work. Specifically, we present a quadratic program (QP) formulation for the CS problem considering the joint activation probabilities among devices. This formulation allows the devices to stochastically select the transmit channels, thus, leading to a soft-clustering approach. We prove that the optimal QP solution can only be attained when it is transformed into a hard-clustering problem, leading to a pure integer QP, which we transform into a pure integer linear program (PILP). We leverage the branch-and-cut (B&C) algorithm to solve PILP optimally. Due to the high computational cost of B&C, we resort to some sub-optimal clustering methods with low computational costs to tackle the clustering problem in CS. Our findings demonstrate that the CS strategy, sourced from B&C, significantly outperforms those derived from sub-optimal clustering methods, even amidst increased device correlation. △ Less

Submitted 17 November, 2023; originally announced December 2023.

High-Power and Safe RF Wireless Charging: Cautious Deployment and Operation

Authors: Onel L. A. López, Osmel M. Rosabal, Amirhossein Azarbahram, A. Basit Khattak, Mehdi Monemi, Richard D. Souza, Petar Popovski, Matti Latva-aho

Abstract: The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT… ▽ More The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT implementation and operation require efficient and cautious strategies and protocols, especially when targeting high-power charging, which constitutes the scope of this work. Herein, we overview the main factors affecting the end-to-end PTE of RF-WPT systems and their multiplicative effect and interdependencies. Moreover, we discuss key electromagnetic field (EMF) exposure metrics, safety limits, and approaches for efficient and EMF-aware deployment and operation. Quantitatively, we show that near-field RF charging may significantly reduce EMF exposure, and thus must be promoted. We also present our vision of a cyber-physical system for efficient and safe wireless charging, specify key components and their interrelation, and illustrate numerically the PTE attained by two modern low-power multi-antenna architectures in a simple setup. Throughout the paper, we highlight the need for high end-to-end PTE architectures and charging protocols transparently complying with EMF exposure regulations and outline relevant challenges and research directions. This work expands the vision and understanding of modern RF-WPT technology and constitutes a step towards making the technology attractive for worldwide commercial exploitation. △ Less

Submitted 20 September, 2023; originally announced November 2023.

Comments: 8 pages, 5 figures, 1 table

ACM Class: C.2.1; C.2.m; C.3; J.2; J.m

6G Fresnel Spot Beamfocusing using Large-Scale Metasurfaces: A Distributed DRL-Based Approach

Authors: Mehdi Monemi, Mohammad Amir Fallah, Mehdi Rasti, Matti Latva-Aho

Abstract: In this paper, we introduce the concept of spot beamfocusing (SBF) in the Fresnel zone through extremely large-scale programmable metasurfaces (ELPMs) as a key enabling technology for 6G networks. A smart SBF scheme aims to adaptively concentrate the aperture's radiating power exactly at a desired focal point (DFP) in the 3D space utilizing some Machine Learning (ML) method. This offers numerous a… ▽ More In this paper, we introduce the concept of spot beamfocusing (SBF) in the Fresnel zone through extremely large-scale programmable metasurfaces (ELPMs) as a key enabling technology for 6G networks. A smart SBF scheme aims to adaptively concentrate the aperture's radiating power exactly at a desired focal point (DFP) in the 3D space utilizing some Machine Learning (ML) method. This offers numerous advantages for next-generation networks including efficient wireless power transfer (WPT), interference mitigation, reduced RF pollution, and improved information security. SBF necessitates ELPMs with precise channel state information (CSI) for all ELPM elements. However, obtaining exact CSI for ELPMs is not feasible in all environments; we alleviate this by proposing an adaptive novel CSI-independent ML scheme based on the TD3 deep-reinforcement-learning (DRL) method. While the proposed ML-based scheme is well-suited for relatively small-size arrays, the computational complexity is unaffordable for ELPMs. To overcome this limitation, we introduce a modular highly scalable structure composed of multiple sub-arrays, each equipped with a TD3-DRL optimizer. This setup enables collaborative optimization of the radiated power at the DFP, significantly reducing computational complexity while enhancing learning speed. The proposed structures benefits in terms of 3D spot-like power distribution, convergence rate, and scalability are validated through simulation results. △ Less

Submitted 13 September, 2024; v1 submitted 18 November, 2023; originally announced November 2023.

GDOP Based BS Selection for Positioning in mmWave 5G NR Networks

Authors: A. Indika Perera, K. B. Shashika Manosha, Nandana Rajatheva, Matti Latva-aho

Abstract: The fifth-generation (5G) of mobile communication supported by millimetre-wave (mmWave) technology and higher base station (BS) densification facilitate to enhance user equipment (UE) positioning. Therefore, 5G cellular system is designed with many positioning measurements and special positioning reference signals with a multitude of configurations for a variety of use cases, expecting stringent p… ▽ More The fifth-generation (5G) of mobile communication supported by millimetre-wave (mmWave) technology and higher base station (BS) densification facilitate to enhance user equipment (UE) positioning. Therefore, 5G cellular system is designed with many positioning measurements and special positioning reference signals with a multitude of configurations for a variety of use cases, expecting stringent positioning accuracies. One of the major factors that the accuracy of a particular position estimate depends on is the geometry of the nodes in the system, which could be measured with the geometric dilution of precision (GDOP). Hence in this paper, we investigate the time difference of arrival (TDOA) measurements based UE positioning accuracy improvement, exploiting the geometric distribution of BSs in mixed LOS and NLOS environment. We propose a BS selection algorithm for UE positioning based on the GDOP of the BSs participating in the positioning process. Simulations are conducted for indoor and outdoor scenarios that use antenna arrays with beam-based mmWave NR communication. Results demonstrate that the proposed BS selection can achieve higher positioning accuracy with fewer radio resources compared to the other BS selection methods. △ Less

Submitted 23 October, 2023; originally announced October 2023.

On the Radio Stripe Deployment for Indoor RF Wireless Power Transfer

Authors: Amirhossein Azarbahram, Onel L. A. Lopez, Petar Popovski, Matti Latva-aho

Abstract: One of the primary goals of future wireless systems is to foster sustainability, for which, radio frequency (RF) wireless power transfer (WPT) is considered a key technology enabler. The key challenge of RF-WPT systems is the extremely low end-to-end efficiency, mainly due to the losses introduced by the wireless channel. Distributed antenna systems are undoubtedly appealing as they can significan… ▽ More One of the primary goals of future wireless systems is to foster sustainability, for which, radio frequency (RF) wireless power transfer (WPT) is considered a key technology enabler. The key challenge of RF-WPT systems is the extremely low end-to-end efficiency, mainly due to the losses introduced by the wireless channel. Distributed antenna systems are undoubtedly appealing as they can significantly shorten the charging distances, thus, reducing channel losses. Interestingly, radio stripe systems provide a cost-efficient and scalable way to deploy a distributed multi-antenna system, and thus have received a lot of attention recently. Herein, we consider an RF-WPT system with a transmit radio stripe network to charge multiple indoor energy hotspots, i.e., spatial regions where the energy harvesting devices are expected to be located, including near-field locations. We formulate the optimal radio stripe deployment problem aimed to maximize the minimum power received by the users and explore two specific predefined shapes, namely the straight line and polygon-shaped configurations. Then, we provide efficient solutions relying on geometric programming to optimize the location of the radio stripe elements. The results demonstrate that the proposed radio stripe deployments outperform a central fully-digital square array with the same number of elements and utilizing larger radio stripe lengths can enhance the performance, while increasing the system frequency may degrade it. △ Less

Submitted 14 October, 2023; originally announced October 2023.

Comments: 6 pages, 4 figures

Decomposition Based Interference Management Framework for Local 6G Networks

Authors: Samitha Gunarathne, Thushan Sivalingam, Nurul Huda Mahmood, Nandana Rajatheva, Matti Latva-Aho

Abstract: Managing inter-cell interference is among the major challenges in a wireless network, more so when strict quality of service needs to be guaranteed such as in ultra-reliable low latency communications (URLLC) applications. This study introduces a novel intelligent interference management framework for a local 6G network that allocates resources based on interference prediction. The proposed algori… ▽ More Managing inter-cell interference is among the major challenges in a wireless network, more so when strict quality of service needs to be guaranteed such as in ultra-reliable low latency communications (URLLC) applications. This study introduces a novel intelligent interference management framework for a local 6G network that allocates resources based on interference prediction. The proposed algorithm involves an advanced signal pre-processing technique known as empirical mode decomposition followed by prediction of each decomposed component using the sequence-to-one transformer algorithm. The predicted interference power is then used to estimate future signal-to-interference plus noise ratio, and subsequently allocate resources to guarantee the high reliability required by URLLC applications. Finally, an interference cancellation scheme is explored based on the predicted interference signal with the transformer model. The proposed sequence-to-one transformer model exhibits its robustness for interference prediction. The proposed scheme is numerically evaluated against two baseline algorithms, and is found that the root mean squared error is reduced by up to 55% over a baseline scheme. △ Less

Submitted 9 October, 2023; originally announced October 2023.

Comments: Accepted for IEEE GLOBECOM 2023 Workshops, Kuala Lumpur, Malaysia

Probabilistic Constellation Shaping With Denoising Diffusion Probabilistic Models: A Novel Approach

Authors: Mehdi Letafati, Samad Ali, Matti Latva-aho

Abstract: With the incredible results achieved from generative pre-trained transformers (GPT) and diffusion models, generative AI (GenAI) is envisioned to yield remarkable breakthroughs in various industrial and academic domains. In this paper, we utilize denoising diffusion probabilistic models (DDPM), as one of the state-of-the-art generative models, for probabilistic constellation shaping in wireless com… ▽ More With the incredible results achieved from generative pre-trained transformers (GPT) and diffusion models, generative AI (GenAI) is envisioned to yield remarkable breakthroughs in various industrial and academic domains. In this paper, we utilize denoising diffusion probabilistic models (DDPM), as one of the state-of-the-art generative models, for probabilistic constellation shaping in wireless communications. While the geometry of constellations is predetermined by the networking standards, probabilistic constellation shaping can help enhance the information rate and communication performance by designing the probability of occurrence (generation) of constellation symbols. Unlike conventional methods that deal with an optimization problem over the discrete distribution of constellations, we take a radically different approach. Exploiting the ``denoise-and-generate'' characteristic of DDPMs, the key idea is to learn how to generate constellation symbols out of noise, ``mimicking'' the way the receiver performs symbol reconstruction. By doing so, we make the constellation symbols sent by the transmitter, and what is inferred (reconstructed) at the receiver become as similar as possible. Our simulations show that the proposed scheme outperforms deep neural network (DNN)-based benchmark and uniform shaping, while providing network resilience as well as robust out-of-distribution performance under low-SNR regimes and non-Gaussian noise. Notably, a threefold improvement in terms of mutual information is achieved compared to DNN-based approach for 64-QAM geometry. △ Less

Submitted 15 September, 2023; originally announced September 2023.

Comments: arXiv admin note: text overlap with arXiv:2309.08568

Denoising Diffusion Probabilistic Models for Hardware-Impaired Communications

Authors: Mehdi Letafati, Samad Ali, Matti Latva-aho

Abstract: Generative AI has received significant attention among a spectrum of diverse industrial and academic domains, thanks to the magnificent results achieved from deep generative models such as generative pre-trained transformers (GPT) and diffusion models. In this paper, we explore the applications of denoising diffusion probabilistic models (DDPMs) in wireless communication systems under practical as… ▽ More Generative AI has received significant attention among a spectrum of diverse industrial and academic domains, thanks to the magnificent results achieved from deep generative models such as generative pre-trained transformers (GPT) and diffusion models. In this paper, we explore the applications of denoising diffusion probabilistic models (DDPMs) in wireless communication systems under practical assumptions such as hardware impairments (HWI), low-SNR regime, and quantization error. Diffusion models are a new class of state-of-the-art generative models that have already showcased notable success with some of the popular examples by OpenAI1 and Google Brain2. The intuition behind DDPM is to decompose the data generation process over small ``denoising'' steps. Inspired by this, we propose using denoising diffusion model-based receiver for a practical wireless communication scheme, while providing network resilience in low-SNR regimes, non-Gaussian noise, different HWI levels, and quantization error. We evaluate the reconstruction performance of our scheme in terms of mean-squared error (MSE) metric. Our results show that more than 25 dB improvement in MSE is achieved compared to deep neural network (DNN)-based receivers. We also highlight robust out-of-distribution performance under non-Gaussian noise. △ Less

Submitted 5 October, 2023; v1 submitted 15 September, 2023; originally announced September 2023.

Energy Beamforming for RF Wireless Power Transfer with Dynamic Metasurface Antennas

Authors: Amirhossein Azarbahram, Onel L. A. Lopez, Richard D. Souza, Rui Zhang, Matti Latva-Aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom.… ▽ More Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom. Thus, simpler architectures such as dynamic metasurface antennas (DMAs) are gaining attention. Herein, we consider an RF-WPT system with a transmit DMA for meeting the energy harvesting requirements of multiple devices and formulate an optimization problem for the minimum-power design. First, we provide a mathematical model to capture the frequency-dependant signal propagation effect in the DMA architecture. Next, we propose a solution based on semi-definite programming and alternating optimization. Results show that a DMA-based structure can outperform a fully-digital implementation and that the required transmit power decreases with the antenna array size, while it increases and remains almost constant with frequency in DMA and FD, respectively. △ Less

Submitted 13 December, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: Accepted for publication in IEEE Wireless Communications Letters

Waveform Optimization and Beam Focusing for Near-field Wireless Power Transfer with Dynamic Metasurface Antennas and Non-linear Energy Harvesters

Authors: Amirhossein Azarbahram, Onel L. A. López, Matti Latva-Aho

Abstract: Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered fo… ▽ More Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency sources is the power consumption and loss introduced by key components such as high-power amplifier (HPA) and rectenna, thus they must be carefully considered for PTE optimization. Herein, we consider a near-field RF-WPT system with a dynamic metasurface antenna (DMA) at the transmitter and non-linear energy harvesters. We provide a mathematical framework to calculate the power consumption and harvested power from multi-tone signal transmissions. Based on this, we propose an approach relying on alternating optimization and successive convex approximation for waveform optimization and beam focusing to minimize power consumption while meeting energy harvesting requirements. Numerical results show that increasing the number of transmit tones reduces the power consumption by leveraging the rectifier's non-linearity more efficiently. Moreover, they demonstrate that increasing the antenna length improves the performance, while DMA outperforms fully-digital architecture in terms of power consumption. Finally, our results verify that the transmitter focuses the energy on receivers located in the near-field, while energy beams are formed in the receivers' direction in the far-field region. △ Less

Submitted 20 November, 2024; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: Accepted in IEEE Transactions on Wireless Communications

Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges

Authors: Osmel Martínez Rosabal, Onel L. Alcaraz López, Hirley Alves, Matti Latva-aho

Abstract: Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which c… ▽ More Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions. △ Less

Submitted 9 November, 2023; v1 submitted 26 June, 2023; originally announced June 2023.

Comments: 17 pages, 7 figures, 2 tables, submitted to IEEE Access Journal

Predictive Resource Allocation for URLLC using Empirical Mode Decomposition

Authors: Chandu Jayawardhana, Thushan Sivalingam, Nurul Huda Mahmood, Nandana Rajatheva, Matti Latva-Aho

Abstract: Effective resource allocation is a crucial requirement to achieve the stringent performance targets of ultra-reliable low-latency communication (URLLC) services. Predicting future interference and utilizing it to design efficient interference management algorithms is one way to allocate resources for URLLC services effectively. This paper proposes an empirical mode decomposition (EMD) based hybrid… ▽ More Effective resource allocation is a crucial requirement to achieve the stringent performance targets of ultra-reliable low-latency communication (URLLC) services. Predicting future interference and utilizing it to design efficient interference management algorithms is one way to allocate resources for URLLC services effectively. This paper proposes an empirical mode decomposition (EMD) based hybrid prediction method to predict the interference and allocate resources for downlink based on the prediction results. EMD is used to decompose the past interference values faced by the user equipment. Long short-term memory and auto-regressive integrated moving average methods are used to predict the decomposed components. The final predicted interference value is reconstructed using individual predicted values of decomposed components. It is found that such a decomposition-based prediction method reduces the root mean squared error of the prediction by $20 - 25\%$. The proposed resource allocation algorithm utilizing the EMD-based interference prediction was found to meet near-optimal allocation of resources and correspondingly results in $2-3$ orders of magnitude lower outage compared to state-of-the-art baseline prediction algorithm-based resource allocation. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Comments: Accepted for European Conference on Networks and Communications (EUCNC) and 6G Summit-2023, Gothenburg, Sweden

High-Throughput Rate-Flexible Combinational Decoders for Multi-Kernel Polar Codes

Authors: Hossein Rezaei, Nandana Rajatheva, Matti Latva-aho

Abstract: Polar codes have received growing attention in the past decade and have been selected as the coding scheme for the control channel in the fifth generation (5G) wireless communication systems. However, the conventional polar codes have only been constructed by binary (2x2) kernel which poses block length limitation to powers of 2. To attain more flexible block lengths, multi-kernel polar codes are… ▽ More Polar codes have received growing attention in the past decade and have been selected as the coding scheme for the control channel in the fifth generation (5G) wireless communication systems. However, the conventional polar codes have only been constructed by binary (2x2) kernel which poses block length limitation to powers of 2. To attain more flexible block lengths, multi-kernel polar codes are proposed. In this paper, a combinational architecture for multi-kernel polar codes with high throughput is proposed based on successive cancellation decoding algorithm. The proposed scheme can decode pure-binary, pure-ternary (3x3), and binary-ternary mixed polar codes. The decoder's architecture is rate-flexible meaning that a new code rate can be assigned to the decoder at every clock cycle. The proposed architecture is validated by FPGA implementation and the results reveal that a code of size N=81 gains the coded throughput of 1664.5 Mbps. A novel Python-based polar compiler is also proposed to automatically generate the HDL modules for target decoders. A designer can input the target block length and kernel ordering of a polar code, and get the required VHDL files automatically. Based on our simulations, the majority of the required HDL files can be generated in less than 0.4 seconds. △ Less

Submitted 25 January, 2023; originally announced January 2023.

Reconfigurable Intelligent Surfaces: The New Frontier of Next G Security

Authors: Jacek Kibilda, Nurul H. Mahmood, André Gomes, Matti Latva-aho, Luiz A. DaSilva

Abstract: RIS is one of the significant technological advancements that will mark next-generation wireless. RIS technology also opens up the possibility of new security threats, since the reflection of impinging signals can be used for malicious purposes. This article introduces the basic concept for a RIS-assisted attack that re-uses the legitimate signal towards a malicious objective. Specific attacks are… ▽ More RIS is one of the significant technological advancements that will mark next-generation wireless. RIS technology also opens up the possibility of new security threats, since the reflection of impinging signals can be used for malicious purposes. This article introduces the basic concept for a RIS-assisted attack that re-uses the legitimate signal towards a malicious objective. Specific attacks are identified from this base scenario, and the RIS-assisted signal cancellation attack is selected for evaluation as an attack that inherently exploits RIS capabilities. The key takeaway from the evaluation is that an effective attack requires accurate channel information, a RIS deployed in a favorable location (from the point of view of the attacker), and it disproportionately affects legitimate links that already suffer from reduced path loss. These observations motivate specific security solutions and recommendations for future work. △ Less

Submitted 9 December, 2022; originally announced December 2022.

Comments: This work has been submitted to the IEEE for possible publication

A Combinational Multi-Kernel Decoder for Polar Codes

Authors: Hossein Rezaei, Nandana Rajatheva, Matti Latva-aho

Abstract: Polar codes have been selected as the channel coding scheme for control channel in the fifth generation (5G) communication system thanks to their capacity achieving characteristics. However, the traditional polar codes support only codes constructed by binary (2x2) kernel which limits the code lengths to powers of 2. Multi-kernel polar codes are proposed to achieve flexible block length. In this p… ▽ More Polar codes have been selected as the channel coding scheme for control channel in the fifth generation (5G) communication system thanks to their capacity achieving characteristics. However, the traditional polar codes support only codes constructed by binary (2x2) kernel which limits the code lengths to powers of 2. Multi-kernel polar codes are proposed to achieve flexible block length. In this paper, the first combinational decoder for multi-kernel polar codes based on successive cancellation algorithm is proposed. The proposed decoder can decode pure-binary and binary-ternary (3x3) mixed polar codes. The architecture is rate-flexible with the capability of online rate assignment and supports any kernel sequences. The FPGA implementation results reveal that for a code of length N = 48, the coded throughput of 812.1 Mbps can be achieved. △ Less

Submitted 13 May, 2023; v1 submitted 16 November, 2022; originally announced November 2022.

A Functional Architecture for 6G Special Purpose Industrial IoT Networks

Authors: {Nurul Huda Mahmood, Gilberto Berardinelli, Emil J. Khatib, Ramin Hashemi, Carlos de Lima, Matti Latva-aho

Abstract: Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprisin… ▽ More Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprising a multitude of specialized functionalities and technological enablers. This article proposes an innovative architecture for such a special-purpose 6G IIoT network incorporating seven functional building blocks categorized into: special-purpose functionalities and enabling technologies. The former consists of Wireless Environment Control, Traffic/Channel Prediction, Proactive Resource Management and End-to-End Optimization functions; whereas the latter includes Synchronization and Coordination, Machine Learning and Artificial Intelligence Algorithms, and Auxiliary Functions. The proposed architecture aims at providing a resource-efficient and holistic solution for the complex and dynamically challenging requirements imposed by future 6G industrial use cases. Selected test scenarios are provided and assessed to illustrate cross-functional collaboration and demonstrate the applicability of the proposed architecture in a wireless IIoT network. △ Less

Submitted 1 July, 2022; originally announced July 2022.

Comments: 11 pages, 5 figures

Journal ref: IEEE Transactions on Industrial Informatics, 2022

Joint Sum Rate and Blocklength Optimization in RIS-aided Short Packet URLLC Systems

Authors: Ramin Hashemi, Samad Ali, Nurul Huda Mahmood, Matti Latva-aho

Abstract: In this paper, a multi-objective optimization problem (MOOP) is proposed for maximizing the achievable finite blocklength (FBL) rate while minimizing the utilized channel blocklengths (CBLs) in a reconfigurable intelligent surface (RIS)-assisted short packet communication system. The formulated MOOP has two objective functions namely maximizing the total FBL rate with a target error probability, a… ▽ More In this paper, a multi-objective optimization problem (MOOP) is proposed for maximizing the achievable finite blocklength (FBL) rate while minimizing the utilized channel blocklengths (CBLs) in a reconfigurable intelligent surface (RIS)-assisted short packet communication system. The formulated MOOP has two objective functions namely maximizing the total FBL rate with a target error probability, and minimizing the total utilized CBLs which is directly proportional to the transmission duration. The considered MOOP variables are the base station (BS) transmit power, number of CBLs, and passive beamforming at the RIS. Since the proposed non-convex problem is intractable to solve, the Tchebyshev method is invoked to transform it into a single-objective OP, then the alternating optimization (AO) technique is employed to iteratively obtain optimized parameters in three main sub-problems. The numerical results show a fundamental trade-off between maximizing the achievable rate in the FBL regime and reducing the transmission duration. Also, the applicability of RIS technology is emphasized in reducing the utilized CBLs while increasing the achievable rate significantly. △ Less

Submitted 2 June, 2022; v1 submitted 28 April, 2022; originally announced April 2022.

Comments: Accepted in IEEE Communications Letters

Supervised Learning based Sparse Channel Estimation for RIS aided Communications

Authors: Dilin Dampahalage, K. B. Shashika Manosha, Nandana Rajatheva, Matti Latva-aho

Abstract: An reconfigurable intelligent surface (RIS) can be used to establish line-of-sight (LoS) communication when the direct path is compromised, which is a common occurrence in a millimeter wave (mmWave) network. In this paper, we focus on the uplink channel estimation of a such network. We formulate this as a sparse signal recovery problem, by discretizing the angle of arrivals (AoAs) at the base stat… ▽ More An reconfigurable intelligent surface (RIS) can be used to establish line-of-sight (LoS) communication when the direct path is compromised, which is a common occurrence in a millimeter wave (mmWave) network. In this paper, we focus on the uplink channel estimation of a such network. We formulate this as a sparse signal recovery problem, by discretizing the angle of arrivals (AoAs) at the base station (BS). On-grid and off-grid AoAs are considered separately. In the on-grid case, we propose an algorithm to estimate the direct and RIS channels. Neural networks trained based on supervised learning is used to estimate the residual angles in the off-grid case, and the AoAs in both cases. Numerical results show the performance gains of the proposed algorithms in both cases. △ Less

Submitted 24 February, 2022; originally announced February 2022.

Comments: \c{opyright} 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

Permutation Matrix Modulation

Authors: Rahmat Faddli Siregar, Nandana Rajatheva, Matti Latva-Aho

Abstract: We propose a novel scheme that allows MIMO system to modulate a set of permutation matrices to send more information bits, extending our initial work on the topic. This system is called Permutation Matrix Modulation (PMM). The basic idea is to employ a permutation matrix as a precoder and treat it as a modulated symbol. We continue the evolution of index modulation in MIMO by adopting all-antenna… ▽ More We propose a novel scheme that allows MIMO system to modulate a set of permutation matrices to send more information bits, extending our initial work on the topic. This system is called Permutation Matrix Modulation (PMM). The basic idea is to employ a permutation matrix as a precoder and treat it as a modulated symbol. We continue the evolution of index modulation in MIMO by adopting all-antenna activation and obtaining a set of unique symbols from altering the positions of the antenna transmit power. We provide the analysis of the achievable rate of PMM under Gaussian Mixture Model (GMM) distribution \revv{and finite cardinality input (FCI). Numerical results are evaluated by comparing PMM with the other existing systems.} We also present a way to attain the optimal achievable rate of PMM by solving a maximization problem via interior-point method. A low complexity detection scheme based on zero-forcing (ZF) is proposed, and maximum likelihood (ML) detection is discussed. We demonstrate the trade-off between simulation of the symbol error rate (SER) and the computational complexity where ZF performs worse in the SER simulation but requires much less computational complexity than ML. △ Less

Submitted 26 December, 2022; v1 submitted 27 December, 2021; originally announced December 2021.

Comments: This article has been accepted for publication in IEEE Transaction on Wireless Communications

A Nonlinear Autoregressive Neural Network for Interference Prediction and Resource Allocation in URLLC Scenarios

Authors: Christian Padilla, Ramin Hashemi, Nurul Huda Mahmood, Matti Latva-aho

Abstract: Ultra reliable low latency communications (URLLC) is a new service class introduced in 5G which is characterized by strict reliability $(1-10^{-5})$ and low latency requirements (1 ms). To meet these requisites, several strategies like overprovisioning of resources and channel-predictive algorithms have been developed. This paper describes the application of a Nonlinear Autoregressive Neural Netwo… ▽ More Ultra reliable low latency communications (URLLC) is a new service class introduced in 5G which is characterized by strict reliability $(1-10^{-5})$ and low latency requirements (1 ms). To meet these requisites, several strategies like overprovisioning of resources and channel-predictive algorithms have been developed. This paper describes the application of a Nonlinear Autoregressive Neural Network (NARNN) as a novel approach to forecast interference levels in a wireless system for the purpose of efficient resource allocation. Accurate interference forecasts also grant the possibility of meeting specific outage probability requirements in URLLC scenarios. Performance of this proposal is evaluated upon the basis of NARNN predictions accuracy and system resource usage. Our proposed approach achieved a promising mean absolute percentage error of 7.8 % on interference predictions and also reduced the resource usage in up to 15 % when compared to a recently proposed interference prediction algorithm. △ Less

Submitted 28 November, 2021; originally announced November 2021.

Comments: 6 pages, 8 figures

LiDAR Aided Human Blockage Prediction for 6G

Authors: Dileepa Marasinghe, Nandana Rajatheva, Matti Latva-aho

Abstract: Leveraging higher frequencies up to THz band paves the way towards a faster network in the next generation of wireless communications. However, such shorter wavelengths are susceptible to higher scattering and path loss forcing the link to depend predominantly on the line-of-sight (LOS) path. Dynamic movement of humans has been identified as a major source of blockages to such LOS links. In this w… ▽ More Leveraging higher frequencies up to THz band paves the way towards a faster network in the next generation of wireless communications. However, such shorter wavelengths are susceptible to higher scattering and path loss forcing the link to depend predominantly on the line-of-sight (LOS) path. Dynamic movement of humans has been identified as a major source of blockages to such LOS links. In this work, we aim to overcome this challenge by predicting human blockages to the LOS link enabling the transmitter to anticipate the blockage and act intelligently. We propose an end-to-end system of infrastructure-mounted LiDAR sensors to capture the dynamics of the communication environment visually, process the data with deep learning and ray casting techniques to predict future blockages. Experiments indicate that the system achieves an accuracy of 87% predicting the upcoming blockages while maintaining a precision of 78% and a recall of 79% for a window of 300 ms. △ Less

Submitted 1 October, 2021; originally announced October 2021.

Comments: To be published in IEEE Globecom 2021 Workshops

Distributed UAV-enabled zero-forcing cooperative jamming scheme for safeguarding future wireless networks

Authors: X. A. Flores Cabezas, D. P. Moya Osorio, M. Latva-aho

Abstract: In this work, we investigate the impact of two cooperative unmanned aerial vehicle (UAV)-based jammers on the secrecy performance of a ground wireless network in the presence of an eavesdropper. For that purpose, we investigate the secrecy-area related metrics, Jamming Coverage and Jamming Efficiency. Moreover, we propose a hybrid metric, the so-called Weighted Secrecy Coverage (WSC) and a virtual… ▽ More In this work, we investigate the impact of two cooperative unmanned aerial vehicle (UAV)-based jammers on the secrecy performance of a ground wireless network in the presence of an eavesdropper. For that purpose, we investigate the secrecy-area related metrics, Jamming Coverage and Jamming Efficiency. Moreover, we propose a hybrid metric, the so-called Weighted Secrecy Coverage (WSC) and a virtual distributed multiple-input-multiple-output (MIMO)-based zero-forcing precoding scheme to avoid the jamming effects on the legitimate receiver. For evaluating these metrics, we derive a closed-form position-based metric, the secrecy improvement. Our mathematical derivations and comparative simulations show that the proposed zero-forcing scheme leads to an improvement on the secrecy performance in terms of the WSC, and provides conditions for improvement of Jamming Efficiency. They also show positioning trends on the UAVs over a fixed orbit around the legitimate transmitter as well as power allocation trends for optimal secrecy. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Comments: arXiv admin note: text overlap with arXiv:2109.13629

Weighted Secrecy Coverage Analysis and the Impact of Friendly Jamming over UAV-Enabled Networks

Authors: X. A. Flores Cabezas, D. P. Moya Osorio, M. Latva-aho

Abstract: In 5G and beyond networks, Unmanned Aerial Vehicles (UAV) are an attractive solution to enhance the secrecy of a wireless systems by exploiting their predominant LOS links and spacial manoeuvrability to introduce a friendly jamming. In this work, we investigate the impact of two cooperative UAV-based jammers on the secrecy performance of a ground wireless wiretap channel by considering secrecy-are… ▽ More In 5G and beyond networks, Unmanned Aerial Vehicles (UAV) are an attractive solution to enhance the secrecy of a wireless systems by exploiting their predominant LOS links and spacial manoeuvrability to introduce a friendly jamming. In this work, we investigate the impact of two cooperative UAV-based jammers on the secrecy performance of a ground wireless wiretap channel by considering secrecy-area related metrics, the jamming coverage and jamming efficiency. Moreover, we propose a hybrid metric, the so-called Weighted Secrecy Coverage (WSC) that can be used as a metric for gaining insights on the optimal deployments of the UAV jammers to provide the best exploration of jamming signals. For evaluating these metrics, we derive a closed-form position-based metric, the secrecy improvement, and propose an analogous computationally simpler metric. Our simulations show that a balanced power allocation between the two UAVs leads to the best performances, as well as a symmetrical positioning behind the line of sight between the legitimate transmitter and receiver. Moreover, there exist an optimal UAV height for the jammers. Finally, we propose a sub-optimal and simpler problem for the maximisation of the WSC. △ Less

Submitted 28 September, 2021; originally announced September 2021.

Untrained DNN for Channel Estimation of RIS-Assisted Multi-User OFDM System with Hardware Impairments

Authors: Nipuni Ginige, K. B. Shashika Manosha, Nandana Rajatheva, Matti Latva-aho

Abstract: Reconfigurable intelligent surface (RIS) is an emerging technology for improving performance in fifth-generation (5G) and beyond networks. Practically channel estimation of RIS-assisted systems is challenging due to the passive nature of the RIS. The purpose of this paper is to introduce a deep learning-based, low complexity channel estimator for the RIS-assisted multi-user single-input-multiple-o… ▽ More Reconfigurable intelligent surface (RIS) is an emerging technology for improving performance in fifth-generation (5G) and beyond networks. Practically channel estimation of RIS-assisted systems is challenging due to the passive nature of the RIS. The purpose of this paper is to introduce a deep learning-based, low complexity channel estimator for the RIS-assisted multi-user single-input-multiple-output (SIMO) orthogonal frequency division multiplexing (OFDM) system with hardware impairments. We propose an untrained deep neural network (DNN) based on the deep image prior (DIP) network to denoise the effective channel of the system obtained from the conventional pilot-based least-square (LS) estimation and acquire a more accurate estimation. We have shown that our proposed method has high performance in terms of accuracy and low complexity compared to conventional methods. Further, we have shown that the proposed estimator is robust to interference caused by the hardware impairments at the transceiver and RIS. △ Less

Submitted 13 July, 2021; originally announced July 2021.