-
Comprehensive Signal Modeling for Talkative Power Conversion
Authors:
Jan Mietzner,
Cerikh Chakraborty,
Peter A. Hoeher,
Lutz Lampe
Abstract:
Talkative power conversion is a switching ripple communication technique that integrates data modulation into a switched-mode power electronics converter, enabling simultaneous information transmission and power conversion. Despite numerous research papers published over the last decade on various theoretical and practical aspects of this emerging topic, thorough signal modeling suitable for analy…
▽ More
Talkative power conversion is a switching ripple communication technique that integrates data modulation into a switched-mode power electronics converter, enabling simultaneous information transmission and power conversion. Despite numerous research papers published over the last decade on various theoretical and practical aspects of this emerging topic, thorough signal modeling suitable for analysis and computer simulations is still lacking. In this article, we derive the continuous-time output voltage of a DC/DC switched-mode power electronics converter for a broad range of pulsed-based modulation schemes. We also develop corresponding discrete-time signal models and assess their accuracies. Finally, we devise a generic end-to-end signal model for arbitrary modulation signals, discuss implications of continuous-time and discrete-time signal modeling on equalization, and consider generalizations to include parasitic effects as well as the influence of general impedance loads.
△ Less
Submitted 15 April, 2025;
originally announced April 2025.
-
Probabilistic Shaping for Nonlinearity Tolerance
Authors:
Mohammad Taha Askari,
Lutz Lampe
Abstract:
Optimizing the input probability distribution of a discrete-time channel is a standard step in the information-theoretic analysis of digital communication systems. Nevertheless, many practical communication systems transmit uniformly and independently distributed symbols drawn from regular constellation sets. The introduction of the probabilistic amplitude shaping architecture has renewed interest…
▽ More
Optimizing the input probability distribution of a discrete-time channel is a standard step in the information-theoretic analysis of digital communication systems. Nevertheless, many practical communication systems transmit uniformly and independently distributed symbols drawn from regular constellation sets. The introduction of the probabilistic amplitude shaping architecture has renewed interest in using optimized probability distributions, i.e., probabilistic shaping. Traditionally, probabilistic shaping has been employed to reduce the transmit power required for a given information rate over additive noise channels. While this translates into substantive performance gains for optical fiber communication systems, the interaction of shaping and fiber nonlinearity has posed intriguing questions. At first glance, probabilistic shaping seems to exacerbate nonlinear interference noise (NLIN) due to larger higher-order standardized moments. Therefore, the optimization of shaping distributions must differ from those used for linear channels. Secondly, finite-length effects related to the memory of the nonlinear fiber channel have been observed. This suggests that the marginal input-symbol distribution is not the only consideration. This paper provides a tutorial-style discussion of probabilistic shaping for optical fiber communication. Since the distinguishing property of the channel is the signal-dependent NLIN, we speak of probabilistic shaping for nonlinearity tolerance. Our analysis builds on the first-order time-domain perturbation approximation of the nonlinear fiber channel and revisits the notion of linear and nonlinear shaping gain. We largely focus on probabilistic amplitude shaping with popular shaping methods. The concept of shaping via sequence selection is given special consideration, as it inherently optimizes a multivariate distribution for shaped constellations.
△ Less
Submitted 12 December, 2024;
originally announced December 2024.
-
Perturbation-based Sequence Selection for Probabilistic Amplitude Shaping
Authors:
Mohammad Taha Askari,
Lutz Lampe
Abstract:
We introduce a practical sign-dependent sequence selection metric for probabilistic amplitude shaping and propose a simple method to predict the gains in signal-to-noise ratio (SNR) for sequence selection. The proposed metric provides a $0.5$ dB SNR gain for single-polarized 256-QAM transmission over a long-haul fiber link.
We introduce a practical sign-dependent sequence selection metric for probabilistic amplitude shaping and propose a simple method to predict the gains in signal-to-noise ratio (SNR) for sequence selection. The proposed metric provides a $0.5$ dB SNR gain for single-polarized 256-QAM transmission over a long-haul fiber link.
△ Less
Submitted 12 July, 2024;
originally announced July 2024.
-
Bayesian Phase Search for Probabilistic Amplitude Shaping
Authors:
Mohammad Taha Askari,
Lutz Lampe
Abstract:
We introduce a Bayesian carrier phase recovery (CPR) algorithm which is robust against low signal-to-noise ratio scenarios. It is therefore effective for phase recovery for probabilistic amplitude shaping (PAS). Results validate that the new algorithm overcomes the degradation experienced by blind phase-search CPR for PAS.
We introduce a Bayesian carrier phase recovery (CPR) algorithm which is robust against low signal-to-noise ratio scenarios. It is therefore effective for phase recovery for probabilistic amplitude shaping (PAS). Results validate that the new algorithm overcomes the degradation experienced by blind phase-search CPR for PAS.
△ Less
Submitted 7 September, 2023; v1 submitted 5 September, 2023;
originally announced September 2023.
-
SmartPUR: An Autonomous PUR Transmission Solution for Mobile C-IoT Devices
Authors:
Gautham Prasad,
Nadhem Rojbi,
Lutz Lampe,
Gus Vos
Abstract:
Cellular Internet-of-things (C-IoT) user equipments (UEs) typically transmit frequent but small amounts of uplink data to the base station. Undergoing a traditional random access procedure (RAP) to transmit a small but frequent data presents a considerable overhead. As an antidote, preconfigured uplink resources (PURs) are typically used in newer UEs, where the devices are allocated uplink resourc…
▽ More
Cellular Internet-of-things (C-IoT) user equipments (UEs) typically transmit frequent but small amounts of uplink data to the base station. Undergoing a traditional random access procedure (RAP) to transmit a small but frequent data presents a considerable overhead. As an antidote, preconfigured uplink resources (PURs) are typically used in newer UEs, where the devices are allocated uplink resources beforehand to transmit on without following the RAP. A prerequisite for transmitting on PURs is that the UEs must use a valid timing advance (TA) so that they do not interfere with transmissions of other nodes in adjacent resources. One solution to this end is to validate the previously held TA by the UE to ensure that it is still valid. While this validation is trivial for stationary UEs, mobile UEs often encounter conditions where the previous TA is no longer valid and a new one is to be requested by falling back on legacy RAP. This limits the applicability of PURs in mobile UEs. To counter this drawback and ensure a near-universal adoption of transmitting on PURs, we propose new machine learning aided solutions for validation and prediction of TA for UEs of any type of mobility. We conduct comprehensive simulation evaluations across different types of communication environments to demonstrate that our proposed solutions provide up to a 98.7% accuracy in predicting the TA.
△ Less
Submitted 21 June, 2023;
originally announced June 2023.
-
Enhanced Hybrid Automatic Repeat Request Scheduling for Non-Terrestrial IoT Networks
Authors:
Gautham Prasad,
Vishnu Rajendra Chandrika,
Lutz Lampe,
Gus Vos
Abstract:
Non-terrestrial networks (NTNs) complement their terrestrial counterparts in enabling ubiquitous connectivity globally by serving unserved and/or underserved areas of the world. While supporting enhanced mobile broadband (eMBB) data over NTNs has been extensively studied in the past, focus on massive machine type communication (mMTC) over NTNs is currently growing, as also witnessed by the new stu…
▽ More
Non-terrestrial networks (NTNs) complement their terrestrial counterparts in enabling ubiquitous connectivity globally by serving unserved and/or underserved areas of the world. While supporting enhanced mobile broadband (eMBB) data over NTNs has been extensively studied in the past, focus on massive machine type communication (mMTC) over NTNs is currently growing, as also witnessed by the new study and work items included into the 3rd generation partnership project (3GPP) agenda for commissioning specifications for Internet-of-Things (IoT) communications over NTNs. Supporting mMTC in non-terrestrial cellular IoT (C-IoT) networks requires jointly addressing the unique challenges introduced in NTNs and CIoT communications. In this paper, we tackle one such issue caused due to the extended round-trip time and increased path loss in NTNs resulting in a degraded network throughput. We propose smarter transport blocks scheduling methods that can increase the efficiency of resource utilization. We conduct end-to-end link-level simulations of C-IoT traffic over NTNs and present numerical results of the data rate gains achieved to show the performance of our proposed solutions against legacy scheduling methods.
△ Less
Submitted 11 May, 2023;
originally announced May 2023.
-
Deep Learning-Aided Perturbation Model-Based Fiber Nonlinearity Compensation
Authors:
Shenghang Luo,
Sunish Kumar Orappanpara Soman,
Lutz Lampe,
Jeebak Mitra
Abstract:
Fiber nonlinearity effects cap achievable rates and ranges in long-haul optical fiber communication links. Conventional nonlinearity compensation methods, such as perturbation theory-based nonlinearity compensation (PB-NLC), attempt to compensate for the nonlinearity by approximating analytical solutions to the signal propagation over optical fibers. However, their practical usability is limited b…
▽ More
Fiber nonlinearity effects cap achievable rates and ranges in long-haul optical fiber communication links. Conventional nonlinearity compensation methods, such as perturbation theory-based nonlinearity compensation (PB-NLC), attempt to compensate for the nonlinearity by approximating analytical solutions to the signal propagation over optical fibers. However, their practical usability is limited by model mismatch and the immense computational complexity associated with the analytical computation of perturbation triplets and the nonlinearity distortion field. Recently, machine learning techniques have been used to optimise parameters of PB-based approaches, which traditionally have been determined analytically from physical models. It has been claimed in the literature that the learned PB-NLC approaches have improved performance and/or reduced computational complexity over their non-learned counterparts. In this paper, we first revisit the acclaimed benefits of the learned PB-NLC approaches by carefully carrying out a comprehensive performance-complexity analysis utilizing state-of-the-art complexity reduction methods. Interestingly, our results show that least squares-based PB-NLC with clustering quantization has the best performance-complexity trade-off among the learned PB-NLC approaches. Second, we advance the state-of-the-art of learned PB-NLC by proposing and designing a fully learned structure. We apply a bi-directional recurrent neural network for learning perturbation triplets that are alike those obtained from the analytical computation and are used as input features for the neural network to estimate the nonlinearity distortion field. Finally, we demonstrate through numerical simulations that our proposed fully learned approach achieves an improved performance-complexity trade-off compared to the existing learned and non-learned PB-NLC techniques.
△ Less
Submitted 15 June, 2023; v1 submitted 19 November, 2022;
originally announced November 2022.
-
Learning for Perturbation-Based Fiber Nonlinearity Compensation
Authors:
Shenghang Luo,
Sunish Kumar Orappanpara Soman,
Lutz Lampe,
Jeebak Mitra,
Chuandong Li
Abstract:
Several machine learning inspired methods for perturbation-based fiber nonlinearity (PBNLC) compensation have been presented in recent literature. We critically revisit acclaimed benefits of those over non-learned methods. Numerical results suggest that learned linear processing of perturbation triplets of PB-NLC is preferable over feedforward neural-network solutions.
Several machine learning inspired methods for perturbation-based fiber nonlinearity (PBNLC) compensation have been presented in recent literature. We critically revisit acclaimed benefits of those over non-learned methods. Numerical results suggest that learned linear processing of perturbation triplets of PB-NLC is preferable over feedforward neural-network solutions.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Joint PMD Tracking and Nonlinearity Compensation with Deep Neural Networks
Authors:
Prasham Jain,
Lutz Lampe,
Jeebak Mitra
Abstract:
Overcoming fiber nonlinearity is one of the core challenges limiting the capacity of optical fiber communication systems. Machine learning based solutions such as learned digital backpropagation (LDBP) and the recently proposed deep convolutional recurrent neural network (DCRNN) have been shown to be effective for fiber nonlinearity compensation (NLC). Incorporating distributed compensation of pol…
▽ More
Overcoming fiber nonlinearity is one of the core challenges limiting the capacity of optical fiber communication systems. Machine learning based solutions such as learned digital backpropagation (LDBP) and the recently proposed deep convolutional recurrent neural network (DCRNN) have been shown to be effective for fiber nonlinearity compensation (NLC). Incorporating distributed compensation of polarization mode dispersion (PMD) within the learned models can improve their performance even further but at the same time, it also couples the compensation of nonlinearity and PMD. Consequently, it is important to consider the time variation of PMD for such a joint compensation scheme. In this paper, we investigate the impact of PMD drift on the DCRNN model with distributed compensation of PMD. We propose a transfer learning based selective training scheme to adapt the learned neural network model to changes in PMD. We demonstrate that fine-tuning only a small subset of weights as per the proposed method is sufficient for adapting the model to PMD drift. Using decision directed feedback for online learning, we track continuous PMD drift resulting from a time-varying rotation of the state of polarization (SOP). We show that transferring knowledge from a pre-trained base model using the proposed scheme significantly reduces the re-training efforts for different PMD realizations. Applying the hinge model for SOP rotation, our simulation results show that the learned models maintain their performance gains while tracking the PMD.
△ Less
Submitted 7 May, 2023; v1 submitted 20 September, 2022;
originally announced September 2022.
-
Probabilistic Amplitude Shaping and Nonlinearity Tolerance: Analysis and Sequence Selection Method
Authors:
Mohammad Taha Askari,
Lutz Lampe,
Jeebak Mitra
Abstract:
Probabilistic amplitude shaping (PAS) is a practical means to achieve a shaping gain in optical fiber communication. However, PAS and shaping in general also affect the signal-dependent generation of nonlinear interference. This provides an opportunity for nonlinearity mitigation through PAS, which is also referred to as a nonlinear shaping gain. In this paper, we introduce a linear lowpass filter…
▽ More
Probabilistic amplitude shaping (PAS) is a practical means to achieve a shaping gain in optical fiber communication. However, PAS and shaping in general also affect the signal-dependent generation of nonlinear interference. This provides an opportunity for nonlinearity mitigation through PAS, which is also referred to as a nonlinear shaping gain. In this paper, we introduce a linear lowpass filter model that relates transmitted symbol-energy sequences and nonlinear distortion experienced in an optical fiber channel. Based on this model, we conduct a nonlinearity analysis of PAS with respect to shaping blocklength and mapping strategy. Our model explains results and relationships found in literature and can be used as a design tool for PAS with improved nonlinearity tolerance. We use the model to introduce a new metric for PAS with sequence selection. We perform simulations of selection-based PAS with various amplitude shapers and mapping strategies to demonstrate the effectiveness of the new metric in different optical fiber system scenarios.
△ Less
Submitted 17 April, 2023; v1 submitted 6 August, 2022;
originally announced August 2022.
-
Power Line Communication and Sensing Using Time Series Forecasting
Authors:
Yinjia Huo,
Gautham Prasad,
Lutz Lampe,
Victor C. M. Leung
Abstract:
Smart electrical grids rely on data communication to support their operation and on sensing for diagnostics and maintenance. Usually, the roles of communication and sensing equipment are different, i.e., communication equipment does not participate in sensing tasks and vice versa. Power line communication (PLC) offers a cost-effective solution for joint communication and sensing for smart grids. T…
▽ More
Smart electrical grids rely on data communication to support their operation and on sensing for diagnostics and maintenance. Usually, the roles of communication and sensing equipment are different, i.e., communication equipment does not participate in sensing tasks and vice versa. Power line communication (PLC) offers a cost-effective solution for joint communication and sensing for smart grids. This is because the high-frequency PLC signals used for data communication also reveal detailed information regarding the health of the power lines that they travel through. Traditional PLC-based power line or cable diagnostic solutions are dependent on prior knowledge of the cable type, network topology, and/or characteristics of the anomalies. In this paper, we develop a power line sensing technique that can detect various types of cable anomalies without any prior domain knowledge. To this end, we design a solution that first uses time-series forecasting to predict the PLC channel state information at any given point in time based on its historical data. Under the approximation that the prediction error follows a Gaussian distribution, we then perform chi-squared statistical test to build an anomaly detector which identifies the occurrence of a cable fault. We demonstrate the effectiveness and universality of our sensing solution via evaluations conducted using both synthetic and real-world data extracted from low- and medium-voltage distribution networks.
△ Less
Submitted 15 July, 2022; v1 submitted 19 October, 2021;
originally announced October 2021.
-
Perturbation Theory-Aided Learned Digital Back-Propagation Scheme for Optical Fiber Nonlinearity Compensation
Authors:
Xiang Lin,
Shenghang Luo,
Sunish Kumar Orappanpara Soman,
Octavia A. Dobre,
Lutz Lampe,
Deyuan Chang,
Chuandong Li
Abstract:
Derived from the regular perturbation treatment of the nonlinear Schrodinger equation, a machine learning-based scheme to mitigate the intra-channel optical fiber nonlinearity is proposed. Referred to as the perturbation theory-aided (PA) learned digital back-propagation (LDBP), the proposed scheme constructs a deep neural network (DNN) in a way similar to the split-step Fourier method: linear and…
▽ More
Derived from the regular perturbation treatment of the nonlinear Schrodinger equation, a machine learning-based scheme to mitigate the intra-channel optical fiber nonlinearity is proposed. Referred to as the perturbation theory-aided (PA) learned digital back-propagation (LDBP), the proposed scheme constructs a deep neural network (DNN) in a way similar to the split-step Fourier method: linear and nonlinear operations alternate. Inspired by the perturbation analysis, the intra-channel cross-phase modulation term is conveniently represented by matrix operations in the DNN. The introduction of this term in each nonlinear operation considerably improves the performance, as well as enables the flexibility of PA-LDBP by adjusting the numbers of spans per step. The proposed scheme is evaluated by numerical simulations of a single carrier optical fiber communication system operating at 32 Gbaud with 64-quadrature amplitude modulation and 20*80 km transmission distance. The results show that the proposed scheme achieves approximately 3.5 dB, 1.8 dB, 1.4 dB, and 0.5 dB performance gain in terms of Q2 factor over the linear compensation, when the numbers of spans per step are 1, 2, 4, and 10, respectively. Two methods are proposed to reduce the complexity of PALDBP, i.e., pruning the number of perturbation coefficients and chromatic dispersion compensation in the frequency domain for multi-span per step cases. Investigation of the performance and complexity suggests that PA-LDBP attains improved performance gains with reduced complexity when compared to LDBP in the cases of 4 and 10 spans per step.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
Outage Performance Analysis of Widely Linear Receivers in Uplink Multi-user MIMO Systems
Authors:
Ronghua Gui,
Naveen Mysore Balasubramanya,
Lutz Lampe
Abstract:
This paper considers the application of widely linear (WL) receivers in an uplink multi-user system using real-valued modulation schemes, where the cellular base station (BS) with multiple antennas provides connectivity for randomly deployed single-antenna users. The targeted use case is massive machine type communication (mMTC) with grant-free access in the uplink, where the network is required t…
▽ More
This paper considers the application of widely linear (WL) receivers in an uplink multi-user system using real-valued modulation schemes, where the cellular base station (BS) with multiple antennas provides connectivity for randomly deployed single-antenna users. The targeted use case is massive machine type communication (mMTC) with grant-free access in the uplink, where the network is required to host a large number of low data rate devices transmitting in an uncoordinated fashion. Four types of WL receivers are investigated, namely the WL zero-forcing (ZF) and the WL minimum meansquared error (MMSE) receivers, along with their enhanced versions employing successive interference cancellation (SIC) with channel-dependent ordering, i.e., the WL-ZF-SIC and WL-MMSE-SIC receivers. The outage performances of these receivers are analytically characterized in the high signal-to-noise ratio (SNR) regime and compared to those of conventional linear (CL) receivers using complex-valued modulation schemes. For the non-SIC receivers, we show that, when compared to the CL counterparts, the WL receivers yield a higher diversity gain when decoding the same number of users and have the same diversity gain but a decreased coding gain when the number of users is nearly doubled. The outage performance analysis of WL-SIC receivers is facilitated by the marginal distribution of ordered eigenvalues of a real-valued Wishart matrix. It is shown that the SIC operation with channel-dependent ordering brings no additional diversity gain to the WL receivers but instead increases the coding gain. Moreover, the coding gain of WL-SIC receivers grows as the number of users increases and even exceeds that of CL-SIC receivers under suitable conditions.
△ Less
Submitted 27 June, 2021;
originally announced June 2021.
-
Deep Neural Network Assisted Second-Order Perturbation-Based Nonlinearity Compensation
Authors:
O. S. Sunish Kumar,
Lutz Lampe,
Shenghang Luo,
Mrinmoy Jana,
Jeebak Mitra,
Chuandong Li
Abstract:
We propose a fiber nonlinearity post-compensation technique using the DNN and the second-order perturbation theory. We achieve 1 dB Q-factor improvement for a 32 Gbaud PDM-64-QAM at 1200 km compared to the linear dispersion compensation.
We propose a fiber nonlinearity post-compensation technique using the DNN and the second-order perturbation theory. We achieve 1 dB Q-factor improvement for a 32 Gbaud PDM-64-QAM at 1200 km compared to the linear dispersion compensation.
△ Less
Submitted 27 June, 2021; v1 submitted 19 May, 2021;
originally announced May 2021.
-
Synchronized SCUBA: D2D Communication for Out-of-Sync Devices
Authors:
Vishnu Rajendran Chandrika,
Gautham Prasad,
Lutz Lampe,
Gus Vos
Abstract:
Device-to-device (D2D) communication is an essential component enabling connectivity for the Internet-of-Things (IoT). SCUBA, which stands for Sidelink Communication on Unlicensed Bands, is a novel medium access control protocol that facilitates D2D communications on the sidelink for IoT and machine-type communication (MTC) cellular devices. SCUBA includes support for direct peer-to-peer communica…
▽ More
Device-to-device (D2D) communication is an essential component enabling connectivity for the Internet-of-Things (IoT). SCUBA, which stands for Sidelink Communication on Unlicensed Bands, is a novel medium access control protocol that facilitates D2D communications on the sidelink for IoT and machine-type communication (MTC) cellular devices. SCUBA includes support for direct peer-to-peer communication on the unlicensed bands by operating in a time division multiplexed manner to coexist with the underlying primary radio access technology, e.g., long term evolution - MTC (LTE-M). A fundamental requirement in the current version of SCUBA is that the communicating devices are to be synchronized with each other so that timing occasions of the devices can be accurately estimated by each other. However, when the devices are out of sync with each other, which may be caused due to one or more of the devices being out of cellular coverage region or are being served by different base stations, typically observed in mobile devices, operation of legacy SCUBA fails. To this end, we design synchronization methods to establish successful SCUBA links between devices that are out-of-sync with each other. Due to the inherent timing discovery embedded in our method, our solution also extends the operating range of SCUBA by eliminating its reliance on timing-agnostic communication. We analyze and compare the performance of our methods in terms of power consumption and the resultant impact on device battery life to show the potential of our solutions.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
SCUBA: An In-Device Multiplexed Protocol for Sidelink Communication on Unlicensed Bands
Authors:
Vishnu Rajendran,
Gautham Prasad,
Lutz Lampe,
Gus Vos
Abstract:
Device-to-device communication (D2D) is a key enabler for connecting devices together to form the Internet of Things (IoT). A growing issue with IoT networks is the increasing number of IoT devices congesting the spectral resources of the cellular bands. Operating D2D in unlicensed band alleviates this issue by offloading network traffic from the licensed bands, while also reducing the associated…
▽ More
Device-to-device communication (D2D) is a key enabler for connecting devices together to form the Internet of Things (IoT). A growing issue with IoT networks is the increasing number of IoT devices congesting the spectral resources of the cellular bands. Operating D2D in unlicensed band alleviates this issue by offloading network traffic from the licensed bands, while also reducing the associated licensing costs. To this end, we present a new low-cost radio access technology (RAT) protocol, called Sidelink Communications on Unlicensed BAnds (SCUBA), which can be implemented on cellular devices such that it coexists with the legacy cellular protocol by operating as a secondary RAT in a time division duplex manner using the existing radio hardware. SCUBA is compatible on different types of cellular devices including the low-complexity half-duplex frequency division duplex machine type communication (MTC) user equipments. SCUBA provides flexible sidelink (SL) latency and battery life tradeoff using a discontinuous reception procedure, which ensures that it is applicable across a wide range of use cases. We prove the effectiveness of our protocol with analyses and simulation results of the medium access control layer of SCUBA using different types of MTC traffic for both SL and the underlying cellular communication.
△ Less
Submitted 2 March, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Efficient Spectrum Utilization via Pulse Shape Design for Fixed Transmission Networks
Authors:
Elena-Iulia Dobre,
Ayman Mostafa,
Lutz Lampe,
Hoda ShahMohammadian,
Ming Jian
Abstract:
Microwave backhaul links are characterized by high signal-to-noise ratios permitting spectrally-efficient transmission. The used signal constellation sizes and achievable data rates are typically limited by transceiver impairments, predominantly by phase noise from non-ideal carrier generation. In this paper, we propose a new method to improve the data rate over such microwave links. We make use o…
▽ More
Microwave backhaul links are characterized by high signal-to-noise ratios permitting spectrally-efficient transmission. The used signal constellation sizes and achievable data rates are typically limited by transceiver impairments, predominantly by phase noise from non-ideal carrier generation. In this paper, we propose a new method to improve the data rate over such microwave links. We make use of the fact that adjacent frequency channels are inactive in many deployment scenarios. We argue that additional data can be transmitted in the skirts of the spectral mask imposed on the transmission signal by regulation. To accomplish this task, we present a shaped wideband single-carrier transmission using non-Nyquist pulse shapes. In particular, we design spectrum-skirt filling (SSF) pulse shaping filters that follow the spectral mask response, and perform detection using an accordingly increased sampling frequency at the receiver. We evaluate the achievable information rates of the SSF-based transmission considering practical dispersive channels and non-ideal transmitter and receiver processing. To compensate for phase noise impairments, we derive carrier phase tracking and estimation techniques, and utilize them in tandem with nonlinear precoding which mitigates the intersymbol interference introduced by the non-Nyquist SSF shaping filter. Quantitative performance evaluations show that the proposed system design achieves higher data rates in a dispersive microwave propagation environment with respect to the conventional transmission with Nyquist pulse shaping.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
Domain specific cues improve robustness of deep learning based segmentation of ct volumes
Authors:
Marie Kloenne,
Sebastian Niehaus,
Leonie Lampe,
Alberto Merola,
Janis Reinelt,
Ingo Roeder,
Nico Scherf
Abstract:
Machine Learning has considerably improved medical image analysis in the past years. Although data-driven approaches are intrinsically adaptive and thus, generic, they often do not perform the same way on data from different imaging modalities. In particular Computed tomography (CT) data poses many challenges to medical image segmentation based on convolutional neural networks (CNNs), mostly due t…
▽ More
Machine Learning has considerably improved medical image analysis in the past years. Although data-driven approaches are intrinsically adaptive and thus, generic, they often do not perform the same way on data from different imaging modalities. In particular Computed tomography (CT) data poses many challenges to medical image segmentation based on convolutional neural networks (CNNs), mostly due to the broad dynamic range of intensities and the varying number of recorded slices of CT volumes. In this paper, we address these issues with a framework that combines domain-specific data preprocessing and augmentation with state-of-the-art CNN architectures. The focus is not limited to optimise the score, but also to stabilise the prediction performance since this is a mandatory requirement for use in automated and semi-automated workflows in the clinical environment.
The framework is validated with an architecture comparison to show CNN architecture-independent effects of our framework functionality. We compare a modified U-Net and a modified Mixed-Scale Dense Network (MS-D Net) to compare dilated convolutions for parallel multi-scale processing to the U-Net approach based on traditional scaling operations. Finally, we propose an ensemble model combining the strengths of different individual methods.
The framework performs well on a range of tasks such as liver and kidney segmentation, without significant differences in prediction performance on strongly differing volume sizes and varying slice thickness. Thus our framework is an essential step towards performing robust segmentation of unknown real-world samples.
△ Less
Submitted 30 January, 2020; v1 submitted 23 July, 2019;
originally announced July 2019.
-
Cable Diagnostics with Power Line Modems for Smart Grid Monitoring
Authors:
Yinjia Huo,
Gautham Prasad,
Lazar Atanackovic,
Lutz Lampe,
Victor C. M. Leung
Abstract:
Remote monitoring of electrical cable conditions is an essential characteristic of the next-generation smart grid, which features the ability to consistently surveil and control the grid infrastructure. In this paper, we propose a technique that harnesses power line modems (PLMs) as sensors for monitoring cable health. We envisage that all or most of these PLMs have already been deployed for data…
▽ More
Remote monitoring of electrical cable conditions is an essential characteristic of the next-generation smart grid, which features the ability to consistently surveil and control the grid infrastructure. In this paper, we propose a technique that harnesses power line modems (PLMs) as sensors for monitoring cable health. We envisage that all or most of these PLMs have already been deployed for data communication purposes and focus on the distribution grid or neighborhood area networks in the smart grid. For such a setting, we propose a machine learning (ML) based framework for automatic cable diagnostics by continuously monitoring the cable status to identify, assess, and locate possible degradations. As part of our technique, we also synthesize state-of-the-art reflectometry methods within the PLMs to extract beneficial features for effective performance of our proposed ML solution. Simulation results demonstrate the effectiveness of our solution under different aging conditions and varying load configurations. Finally, we reflect on our proposed diagnostics method by evaluating its robustness and comparing it with existing alternatives.
△ Less
Submitted 21 February, 2019; v1 submitted 3 August, 2018;
originally announced August 2018.
