-
Electrostatic Clutches Enable Simultaneous Mechanical Multiplexing
Authors:
Timothy E. Amish,
Jeffrey T. Auletta,
Chad C. Kessens,
Joshua R. Smith,
Jeffrey I. Lipton
Abstract:
Actuating robotic systems with multiple degrees of freedom (DoF) traditionally requires numerous motors, leading to increased size, weight, cost, and power consumption. Mechanical multiplexing offers a solution by enabling a single actuator to control multiple DoF. However, existing multiplexers have either been limited to electrically controlled time-based multiplexing that control one DoF at a t…
▽ More
Actuating robotic systems with multiple degrees of freedom (DoF) traditionally requires numerous motors, leading to increased size, weight, cost, and power consumption. Mechanical multiplexing offers a solution by enabling a single actuator to control multiple DoF. However, existing multiplexers have either been limited to electrically controlled time-based multiplexing that control one DoF at a time or have relied on mechanical switching to control multiple DoF simultaneously. There is a strong need for a system that can perform electrically controlled multiplexing for both time-based and simultaneous control of multiple DoF. This study introduces a novel electrostatic capstan clutch-based mechanical multiplexer that enables high-force, single-motor control of multiple DoF. Here, we show that our system achieves both single-input-single-output (SISO) and single-input-multipleoutput (SIMO) actuation, allowing bidirectional control and position holding with minimal power consumption. Each output can actuate a 22.24 N load, limited by clutch performance, up to 5 cm. The number of outputs and actuation length is currently limited by the length of the drive shaft. We demonstrate the integration of our system into a 4-DoF commercial robotic hand using a single motor. These findings show that electrostatic clutchbased multiplexing provides a scalable and energy-efficient design solution for high-DoF robotic platforms, opening new possibilities for lightweight and power-efficient actuation in robotics.
△ Less
Submitted 21 March, 2025; v1 submitted 14 January, 2025;
originally announced January 2025.
-
Johnsen-Rahbek Capstan Clutch: A High Torque Electrostatic Clutch
Authors:
Timothy E. Amish,
Jeffrey T. Auletta,
Chad C. Kessens,
Joshua R. Smith,
Jeffrey I. Lipton
Abstract:
In many robotic systems, the holding state consumes power, limits operating time, and increases operating costs. Electrostatic clutches have the potential to improve robotic performance by generating holding torques with low power consumption. A key limitation of electrostatic clutches has been their low specific shear stresses which restrict generated holding torque, limiting many applications. H…
▽ More
In many robotic systems, the holding state consumes power, limits operating time, and increases operating costs. Electrostatic clutches have the potential to improve robotic performance by generating holding torques with low power consumption. A key limitation of electrostatic clutches has been their low specific shear stresses which restrict generated holding torque, limiting many applications. Here we show how combining the Johnsen-Rahbek (JR) effect with the exponential tension scaling capstan effect can produce clutches with the highest specific shear stress in the literature. Our system generated 31.3 N/cm^2 sheer stress and a total holding torque of 7.1 Nm while consuming only 2.5 mW/cm^2 at 500 V. We demonstrate a theoretical model of an electrostatic adhesive capstan clutch and demonstrate how large angle (theta > 2pi) designs increase efficiency over planar or small angle (theta < pi) clutch designs. We also report the first unfilled polymeric material, polybenzimidazole (PBI), to exhibit the JR-effect.
△ Less
Submitted 27 March, 2024; v1 submitted 19 December, 2023;
originally announced December 2023.
-
Mechanical principles of dynamic terrestrial self-righting using wings
Authors:
Chen Li,
Chad C. Kessens,
Ronald S. Fearing,
Robert J. Full
Abstract:
Terrestrial animals and robots are susceptible to flipping-over during rapid locomotion in complex terrains. However, small robots are less capable of self-righting from an upside-down orientation compared to small animals like insects. Inspired by the winged discoid cockroach, we designed a new robot that opens its wings to self-right by pushing against the ground. We used this robot to systemati…
▽ More
Terrestrial animals and robots are susceptible to flipping-over during rapid locomotion in complex terrains. However, small robots are less capable of self-righting from an upside-down orientation compared to small animals like insects. Inspired by the winged discoid cockroach, we designed a new robot that opens its wings to self-right by pushing against the ground. We used this robot to systematically test how self-righting performance depends on wing opening magnitude, speed, and asymmetry, and modeled how kinematic and energetic requirements depend on wing shape and body/wing mass distribution. We discovered that the robot self-rights dynamically using kinetic energy to overcome potential energy barriers, that larger and faster symmetric wing opening increases self-righting performance, and that opening wings asymmetrically increases righting probability when wing opening is small. Our results suggested that the discoid cockroach's winged self-righting is a dynamic maneuver. While the thin, lightweight wings of the discoid cockroach and our robot are energetically sub-optimal for self-righting compared to tall, heavy ones, their ability to open wings saves them substantial energy compared to if they had static shells. Analogous to biological exaptations, our study provided a proof-of-concept for terrestrial robots to use existing morphology in novel ways to overcome new locomotor challenges.
△ Less
Submitted 15 December, 2021; v1 submitted 17 March, 2021;
originally announced March 2021.
