Showing 1–4 of 4 results for author: Isik, C

A Hybrid Intelligent System for Protection of Transmission Lines Connected to PV Farms based on Linear Trends

Authors: Pallav Kumar Bera, Samita Rani Pani, Can Isik, Ramesh C. Bansal

Abstract: Conventional relays face challenges for transmission lines connected to inverter-based resources (IBRs). In this article, a single-ended intelligent protection of the transmission line in the zone between the grid and the PV farm is suggested. The method employs a fuzzy logic and random forest (RF)-based hybrid system to detect faults based on combined linear trend attributes of the 3-phase curren… ▽ More Conventional relays face challenges for transmission lines connected to inverter-based resources (IBRs). In this article, a single-ended intelligent protection of the transmission line in the zone between the grid and the PV farm is suggested. The method employs a fuzzy logic and random forest (RF)-based hybrid system to detect faults based on combined linear trend attributes of the 3-phase currents. The fault location is determined and the faulty phase is detected. RF feature selection is used to obtain the optimal linear trend feature. The performance of the methodology is examined for abnormal events such as faults, capacitor and load-switching operations simulated in PSCAD/EMTDC on IEEE 9-bus system obtained by varying various fault and switching parameters. Additionally, when validating the suggested strategy, consideration is given to the effects of conditions such as the presence of double circuit lines, PV capacity, sampling rate, data window length, noise, high impedance faults, CT saturation, compensation devices, evolving and cross-country faults, and far-end and near-end faults. The findings indicate that the suggested strategy can be used to deal with a variety of system configurations and situations while still safeguarding such complex power transmission networks. △ Less

Submitted 18 June, 2024; originally announced June 2024.

Comments: 27 pages, 20 figures

Journal ref: Electric Power Systems Research, Volume 237, August 2024, 110991

Dictionary Attack on IMU-based Gait Authentication

Authors: Rajesh Kumar, Can Isik, Chilukuri K. Mohan

Abstract: We present a novel adversarial model for authentication systems that use gait patterns recorded by the inertial measurement unit (IMU) built into smartphones. The attack idea is inspired by and named after the concept of a dictionary attack on knowledge (PIN or password) based authentication systems. In particular, this work investigates whether it is possible to build a dictionary of IMUGait patt… ▽ More We present a novel adversarial model for authentication systems that use gait patterns recorded by the inertial measurement unit (IMU) built into smartphones. The attack idea is inspired by and named after the concept of a dictionary attack on knowledge (PIN or password) based authentication systems. In particular, this work investigates whether it is possible to build a dictionary of IMUGait patterns and use it to launch an attack or find an imitator who can actively reproduce IMUGait patterns that match the target's IMUGait pattern. Nine physically and demographically diverse individuals walked at various levels of four predefined controllable and adaptable gait factors (speed, step length, step width, and thigh-lift), producing 178 unique IMUGait patterns. Each pattern attacked a wide variety of user authentication models. The deeper analysis of error rates (before and after the attack) challenges the belief that authentication systems based on IMUGait patterns are the most difficult to spoof; further research is needed on adversarial models and associated countermeasures. △ Less

Submitted 31 December, 2023; v1 submitted 21 September, 2023; originally announced September 2023.

Comments: 12 pages, 9 figures, accepted at AISec23 colocated with ACM CCS, November 30, 2023, Copenhagen, Denmark

ACM Class: K.6.5

Intelligent Protection & Classification of Transients in Two-Core Symmetric Phase Angle Regulating Transformers

Authors: Pallav Kumar Bera, Can Isik

Abstract: This paper investigates the applicability of time and time-frequency features based classifiers to distinguish internal faults and other transients - magnetizing inrush, sympathetic inrush, external faults with current transformer saturation, and overexcitation - for Indirect Symmetrical Phase Angle Regulating Transformers (ISPAR). Then the faulty transformer unit (series/exciting) of the ISPAR is… ▽ More This paper investigates the applicability of time and time-frequency features based classifiers to distinguish internal faults and other transients - magnetizing inrush, sympathetic inrush, external faults with current transformer saturation, and overexcitation - for Indirect Symmetrical Phase Angle Regulating Transformers (ISPAR). Then the faulty transformer unit (series/exciting) of the ISPAR is located, or else the transient disturbance is identified. An event detector detects variation in differential currents and registers one-cycle of 3-phase post transient samples which are used to extract the time and time-frequency features for training seven classifiers. Three different sets of features - wavelet coefficients, time-domain features, and combination of time and wavelet energy - obtained from exhaustive search using Decision Tree, random forest feature selection, and maximum Relevance Minimum Redundancy are used. The internal fault is detected with a balanced accuracy of 99.9%, the faulty unit is localized with balanced accuracy of 98.7% and the no-fault transients are classified with balanced accuracy of 99.5%. The results show potential for accurate internal fault detection and localization, and transient identification. The proposed scheme can supervise the operation of existing microprocessor-based differential relays resulting in higher stability and dependability. The ISPAR is modeled and the transients are simulated in PSCAD/EMTDC by varying several parameters. △ Less

Submitted 17 June, 2020; originally announced June 2020.

Journal ref: IEEE Access, vol. 9, pp. 72937-72948, 2021

Discrimination of Internal Faults and Other Transients in an Interconnected System with Power Transformers and Phase Angle Regulators

Authors: Pallav Kumar Bera, Can Isik, Vajendra Kumar

Abstract: This study solves the problem of accurate detection of internal faults and classification of transients in a 5-bus interconnected system for Phase Angle Regulators (PAR) and Power Transformers. The analysis prevents mal-operation of differential relays in case of transients other than faults which include magnetizing inrush, sympathetic inrush, external faults with CT saturation, capacitor switchi… ▽ More This study solves the problem of accurate detection of internal faults and classification of transients in a 5-bus interconnected system for Phase Angle Regulators (PAR) and Power Transformers. The analysis prevents mal-operation of differential relays in case of transients other than faults which include magnetizing inrush, sympathetic inrush, external faults with CT saturation, capacitor switching, non-linear load switching, and ferroresonance. A gradient boosting classifier (GBC) is used to distinguish the internal faults from the transient disturbances based on 1.5 cycles of 3-phase differential currents registered by a change detector. After the detection of an internal fault, GBCs are used to locate the faulty unit (Power Transformer, PAR series, or exciting unit) and identify the type of fault. In case a transient disturbance is detected, another GBC classifies them into the six transient disturbances. Five most relevant frequency and time domain features obtained using Information Gain are used to train and test the classifiers. The proposed algorithm distinguishes the internal faults from the other transients with a balanced accuracy of 99.95%. The faulty transformer unit is located with a balanced accuracy of 99.5% and the different transient disturbances are identified with a balanced accuracy of 99.3%. Moreover, the reliability of the scheme is verified for different rating and connection of the transformers involved, CT saturation, and noise levels in the signals. These GBC classifiers can work together with a conventional differential relay and offer a supervisory control over its operation. PSCAD/EMTDC software is used for simulation of the transients and to develop the two and three-winding transformer models for creating the internal faults including inter-turn and inter-winding faults. △ Less

Submitted 2 August, 2020; v1 submitted 13 April, 2020; originally announced April 2020.

Journal ref: IEEE Systems Journal, vol. 15, no. 3, pp. 3450-3461, Sept. 2021