Showing 1–50 of 73 results for author: He, C

B2LoRa: Boosting LoRa Transmission for Satellite-IoT Systems with Blind Coherent Combining

Authors: Yimin Zhao, Weibo Wang, Xiong Wang, Linghe Kong, Jiadi Yu, Yifei Zhu, Shiyuan Li, Chong He, Guihai Chen

Abstract: With the rapid growth of Low Earth Orbit (LEO) satellite networks, satellite-IoT systems using the LoRa technique have been increasingly deployed to provide widespread Internet services to low-power and low-cost ground devices. However, the long transmission distance and adverse environments from IoT satellites to ground devices pose a huge challenge to link reliability, as evidenced by the measur… ▽ More With the rapid growth of Low Earth Orbit (LEO) satellite networks, satellite-IoT systems using the LoRa technique have been increasingly deployed to provide widespread Internet services to low-power and low-cost ground devices. However, the long transmission distance and adverse environments from IoT satellites to ground devices pose a huge challenge to link reliability, as evidenced by the measurement results based on our real-world setup. In this paper, we propose a blind coherent combining design named B2LoRa to boost LoRa transmission performance. The intuition behind B2LoRa is to leverage the repeated broadcasting mechanism inherent in satellite-IoT systems to achieve coherent combining under the low-power and low-cost constraints, where each re-transmission at different times is regarded as the same packet transmitted from different antenna elements within an antenna array. Then, the problem is translated into aligning these packets at a fine granularity despite the time, frequency, and phase offsets between packets in the case of frequent packet loss. To overcome this challenge, we present three designs - joint packet sniffing, frequency shift alignment, and phase drift mitigation to deal with ultra-low SNRs and Doppler shifts featured in satellite-IoT systems, respectively. Finally, experiment results based on our real-world deployments demonstrate the high efficiency of B2LoRa. △ Less

Submitted 29 May, 2025; originally announced May 2025.

Comments: Accepted by ACM MOBICOM'25

Threshold Strategy for Leaking Corner-Free Hamilton-Jacobi Reachability with Decomposed Computations

Authors: Chong He, Mugilan Mariappan, Keval Vora, Mo Chen

Abstract: Hamilton-Jacobi (HJ) Reachability is widely used to compute value functions for states satisfying specific control objectives. However, it becomes intractable for high-dimensional problems due to the curse of dimensionality. Dimensionality reduction approaches are essential for mitigating this challenge, whereas they could introduce the ``leaking corner issue", leading to inaccuracies in the resul… ▽ More Hamilton-Jacobi (HJ) Reachability is widely used to compute value functions for states satisfying specific control objectives. However, it becomes intractable for high-dimensional problems due to the curse of dimensionality. Dimensionality reduction approaches are essential for mitigating this challenge, whereas they could introduce the ``leaking corner issue", leading to inaccuracies in the results. In this paper, we define the ``leaking corner issue" in terms of value functions, propose and prove a necessary condition for its occurrence. We then use these theoretical contributions to introduce a new local updating method that efficiently corrects inaccurate value functions while maintaining the computational efficiency of the dimensionality reduction approaches. We demonstrate the effectiveness of our method through numerical simulations. Although we validate our method with the self-contained subsystem decomposition (SCSD), our approach is applicable to other dimensionality reduction techniques that introduce the ``leaking corners". △ Less

Submitted 15 May, 2025; originally announced May 2025.

Comments: 7 pages, Submitted to Conference on Decision and Control (CDC)

Phased Array Calibration based on Rotating-Element Harmonic Electric-Field Vector with Time Modulation

Authors: Shiyuan Li, Yuyue Zhou, Chi Zhang, Liang Kong, Kebin Liu, Yihan Xie, Chong He

Abstract: Calibration is crucial for ensuring the performance of phased array since amplitude-phase imbalance between elements results in significant performance degradation. While amplitude-only calibration methods offer advantages when phase measurements are impractical, conventional approaches face two key challenges: they typically require high-resolution phase shifters and remain susceptible to phase e… ▽ More Calibration is crucial for ensuring the performance of phased array since amplitude-phase imbalance between elements results in significant performance degradation. While amplitude-only calibration methods offer advantages when phase measurements are impractical, conventional approaches face two key challenges: they typically require high-resolution phase shifters and remain susceptible to phase errors inherent in these components. To overcome these limitations, we propose a Rotating element Harmonic Electric-field Vector (RHEV) strategy, which enables precise calibration through time modulation principles. The proposed technique functions as follows. Two 1-bit phase shifters are periodically phase-switched at the same frequency, each generating corresponding harmonics. By adjusting the relative delay between their modulation timings, the phase difference between the $+1$st harmonics produced by the two elements can be precisely controlled, utilizing the time-shift property of the Fourier transform. Furthermore, the +1st harmonic generated by sequential modulation of individual elements exhibits a linear relationship with the amplitude of the modulated element, enabling amplitude ambiguity resolution. The proposed RHEV-based calibration method generates phase shifts through relative timing delays rather than physical phase shifter adjustments, rendering it less susceptible to phase shift errors. Additionally, since the calibration process exclusively utilizes the $+1$st harmonic, which is produced solely by the modulated unit, the method demonstrates consistent performance regardless of array size. Extensive numerical simulations, practical in-channel and over-the-air (OTA) calibration experiments demonstrate the effectiveness and distinct advantages of the proposed method. △ Less

Submitted 17 April, 2025; originally announced April 2025.

SACA: A Scenario-Aware Collision Avoidance Framework for Autonomous Vehicles Integrating LLMs-Driven Reasoning

Authors: Shiyue Zhao, Junzhi Zhang, Neda Masoud, Heye Huang, Xiaohui Hou, Chengkun He

Abstract: Reliable collision avoidance under extreme situations remains a critical challenge for autonomous vehicles. While large language models (LLMs) offer promising reasoning capabilities, their application in safety-critical evasive maneuvers is limited by latency and robustness issues. Even so, LLMs stand out for their ability to weigh emotional, legal, and ethical factors, enabling socially responsib… ▽ More Reliable collision avoidance under extreme situations remains a critical challenge for autonomous vehicles. While large language models (LLMs) offer promising reasoning capabilities, their application in safety-critical evasive maneuvers is limited by latency and robustness issues. Even so, LLMs stand out for their ability to weigh emotional, legal, and ethical factors, enabling socially responsible and context-aware collision avoidance. This paper proposes a scenario-aware collision avoidance (SACA) framework for extreme situations by integrating predictive scenario evaluation, data-driven reasoning, and scenario-preview-based deployment to improve collision avoidance decision-making. SACA consists of three key components. First, a predictive scenario analysis module utilizes obstacle reachability analysis and motion intention prediction to construct a comprehensive situational prompt. Second, an online reasoning module refines decision-making by leveraging prior collision avoidance knowledge and fine-tuning with scenario data. Third, an offline evaluation module assesses performance and stores scenarios in a memory bank. Additionally, A precomputed policy method improves deployability by previewing scenarios and retrieving or reasoning policies based on similarity and confidence levels. Real-vehicle tests show that, compared with baseline methods, SACA effectively reduces collision losses in extreme high-risk scenarios and lowers false triggering under complex conditions. Project page: https://sean-shiyuez.github.io/SACA/. △ Less

Submitted 10 June, 2025; v1 submitted 31 March, 2025; originally announced April 2025.

Comments: 11 pages,10 figures. This work has been submitted to the IEEE TVT for possible publication

Towards Robust Time-of-Flight Depth Denoising with Confidence-Aware Diffusion Model

Authors: Changyong He, Jin Zeng, Jiawei Zhang, Jiajie Guo

Abstract: Time-of-Flight (ToF) sensors efficiently capture scene depth, but the nonlinear depth construction procedure often results in extremely large noise variance or even invalid areas. Recent methods based on deep neural networks (DNNs) achieve enhanced ToF denoising accuracy but tend to struggle when presented with severe noise corruption due to limited prior knowledge of ToF data distribution. In thi… ▽ More Time-of-Flight (ToF) sensors efficiently capture scene depth, but the nonlinear depth construction procedure often results in extremely large noise variance or even invalid areas. Recent methods based on deep neural networks (DNNs) achieve enhanced ToF denoising accuracy but tend to struggle when presented with severe noise corruption due to limited prior knowledge of ToF data distribution. In this paper, we propose DepthCAD, a novel ToF denoising approach that ensures global structural smoothness by leveraging the rich prior knowledge in Stable Diffusion and maintains local metric accuracy by steering the diffusion process with confidence guidance. To adopt the pretrained image diffusion model to ToF depth denoising, we apply the diffusion on raw ToF correlation measurements with dynamic range normalization before converting to depth maps. Experimental results validate the state-of-the-art performance of the proposed scheme, and the evaluation on real data further verifies its robustness against real-world ToF noise. △ Less

Submitted 25 March, 2025; originally announced March 2025.

Beyond H&E: Unlocking Pathological Insights with Polarization via Self-supervised Learning

Authors: Yao Du, Jiaxin Zhuang, Xiaoyu Zheng, Jing Cong, Limei Guo, Chao He, Lin Luo, Xiaomeng Li

Abstract: Histopathology image analysis is fundamental to digital pathology, with hematoxylin and eosin (H&E) staining as the gold standard for diagnostic and prognostic assessments. While H&E imaging effectively highlights cellular and tissue structures, it lacks sensitivity to birefringence and tissue anisotropy, which are crucial for assessing collagen organization, fiber alignment, and microstructural a… ▽ More Histopathology image analysis is fundamental to digital pathology, with hematoxylin and eosin (H&E) staining as the gold standard for diagnostic and prognostic assessments. While H&E imaging effectively highlights cellular and tissue structures, it lacks sensitivity to birefringence and tissue anisotropy, which are crucial for assessing collagen organization, fiber alignment, and microstructural alterations--key indicators of tumor progression, fibrosis, and other pathological conditions. To bridge this gap, we propose PolarHE, a dual modality fusion framework that integrates H&E with polarization imaging, leveraging the polarization ability to enhance tissue characterization. Our approach employs a feature decomposition strategy to disentangle common and modality specific features, ensuring effective multimodal representation learning. Through comprehensive validation, our approach significantly outperforms previous methods, achieving an accuracy of 86.70% on the Chaoyang dataset and 89.06% on the MHIST dataset. Moreover, polarization property visualization reveals distinct optical signatures of pathological tissues, highlighting its diagnostic potential. t-SNE visualizations further confirm our model effectively captures both shared and unique modality features, reinforcing the complementary nature of polarization imaging. These results demonstrate that polarization imaging is a powerful and underutilized modality in computational pathology, enriching feature representation and improving diagnostic accuracy. PolarHE establishes a promising direction for multimodal learning, paving the way for more interpretable and generalizable pathology models. Our code will be released after paper acceptance. △ Less

Submitted 5 March, 2025; originally announced March 2025.

Diffusion-based Virtual Staining from Polarimetric Mueller Matrix Imaging

Authors: Xiaoyu Zheng, Jing Wen, Jiaxin Zhuang, Yao Du, Jing Cong, Limei Guo, Chao He, Lin Luo, Hao Chen

Abstract: Polarization, as a new optical imaging tool, has been explored to assist in the diagnosis of pathology. Moreover, converting the polarimetric Mueller Matrix (MM) to standardized stained images becomes a promising approach to help pathologists interpret the results. However, existing methods for polarization-based virtual staining are still in the early stage, and the diffusion-based model, which h… ▽ More Polarization, as a new optical imaging tool, has been explored to assist in the diagnosis of pathology. Moreover, converting the polarimetric Mueller Matrix (MM) to standardized stained images becomes a promising approach to help pathologists interpret the results. However, existing methods for polarization-based virtual staining are still in the early stage, and the diffusion-based model, which has shown great potential in enhancing the fidelity of the generated images, has not been studied yet. In this paper, a Regulated Bridge Diffusion Model (RBDM) for polarization-based virtual staining is proposed. RBDM utilizes the bidirectional bridge diffusion process to learn the mapping from polarization images to other modalities such as H\&E and fluorescence. And to demonstrate the effectiveness of our model, we conduct the experiment on our manually collected dataset, which consists of 18,000 paired polarization, fluorescence and H\&E images, due to the unavailability of the public dataset. The experiment results show that our model greatly outperforms other benchmark methods. Our dataset and code will be released upon acceptance. △ Less

Submitted 3 March, 2025; originally announced March 2025.

ICGNN: Graph Neural Network Enabled Scalable Beamforming for MISO Interference Channels

Authors: Changpeng He, Yang Lu, Bo Ai, Octavia A. Dobre, Zhiguo Ding, Dusit Niyato

Abstract: This paper investigates the graph neural network (GNN)-enabled beamforming design for interference channels. We propose a model termed interference channel GNN (ICGNN) to solve a quality-of-service constrained energy efficiency maximization problem. The ICGNN is two-stage, where the direction and power parts of beamforming vectors are learned separately but trained jointly via unsupervised learnin… ▽ More This paper investigates the graph neural network (GNN)-enabled beamforming design for interference channels. We propose a model termed interference channel GNN (ICGNN) to solve a quality-of-service constrained energy efficiency maximization problem. The ICGNN is two-stage, where the direction and power parts of beamforming vectors are learned separately but trained jointly via unsupervised learning. By formulating the dimensionality of features independent of the transceiver pairs, the ICGNN is scalable with the number of transceiver pairs. Besides, to improve the performance of the ICGNN, the hybrid maximum ratio transmission and zero-forcing scheme reduces the output ports, the feature enhancement module unifies the two types of links into one type, the subgraph representation enhances the message passing efficiency, and the multi-head attention and residual connection facilitate the feature extracting. Furthermore, we present the over-the-air distributed implementation of the ICGNN. Ablation studies validate the effectiveness of key components in the ICGNN. Numerical results also demonstrate the capability of ICGNN in achieving near-optimal performance with an average inference time less than 0.1 ms. The scalability of ICGNN for unseen problem sizes is evaluated and enhanced by transfer learning with limited fine-tuning cost. The results of the centralized and distributed implementations of ICGNN are illustrated. △ Less

Submitted 6 February, 2025; originally announced February 2025.

Graph Neural Network Enabled Fluid Antenna Systems: A Two-Stage Approach

Authors: Changpeng He, Yang Lu, Wei Chen, Bo Ai, Kai-Kit Wong, Dusit Niyato

Abstract: An emerging fluid antenna system (FAS) brings a new dimension, i.e., the antenna positions, to deal with the deep fading, but simultaneously introduces challenges related to the transmit design. This paper proposes an ``unsupervised learning to optimize" paradigm to optimize the FAS. Particularly, we formulate the sum-rate and energy efficiency (EE) maximization problems for a multiple-user multip… ▽ More An emerging fluid antenna system (FAS) brings a new dimension, i.e., the antenna positions, to deal with the deep fading, but simultaneously introduces challenges related to the transmit design. This paper proposes an ``unsupervised learning to optimize" paradigm to optimize the FAS. Particularly, we formulate the sum-rate and energy efficiency (EE) maximization problems for a multiple-user multiple-input single-output (MU-MISO) FAS and solved by a two-stage graph neural network (GNN) where the first stage and the second stage are for the inference of antenna positions and beamforming vectors, respectively. The outputs of the two stages are jointly input into a unsupervised loss function to train the two-stage GNN. The numerical results demonstrates that the advantages of the FAS for performance improvement and the two-stage GNN for real-time and scalable optimization. Besides, the two stages can function separately. △ Less

Submitted 6 February, 2025; originally announced February 2025.

Continuous Autoregressive Modeling with Stochastic Monotonic Alignment for Speech Synthesis

Authors: Weiwei Lin, Chenghan He

Abstract: We propose a novel autoregressive modeling approach for speech synthesis, combining a variational autoencoder (VAE) with a multi-modal latent space and an autoregressive model that uses Gaussian Mixture Models (GMM) as the conditional probability distribution. Unlike previous methods that rely on residual vector quantization, our model leverages continuous speech representations from the VAE's lat… ▽ More We propose a novel autoregressive modeling approach for speech synthesis, combining a variational autoencoder (VAE) with a multi-modal latent space and an autoregressive model that uses Gaussian Mixture Models (GMM) as the conditional probability distribution. Unlike previous methods that rely on residual vector quantization, our model leverages continuous speech representations from the VAE's latent space, greatly simplifying the training and inference pipelines. We also introduce a stochastic monotonic alignment mechanism to enforce strict monotonic alignments. Our approach significantly outperforms the state-of-the-art autoregressive model VALL-E in both subjective and objective evaluations, achieving these results with only 10.3\% of VALL-E's parameters. This demonstrates the potential of continuous speech language models as a more efficient alternative to existing quantization-based speech language models. Sample audio can be found at https://tinyurl.com/gmm-lm-tts. △ Less

Submitted 13 February, 2025; v1 submitted 3 February, 2025; originally announced February 2025.

Comments: ICLR 2025

Journal ref: ICLR 2025

Efficient Point Clouds Upsampling via Flow Matching

Authors: Zhi-Song Liu, Chenhang He, Lei Li

Abstract: Diffusion models are a powerful framework for tackling ill-posed problems, with recent advancements extending their use to point cloud upsampling. Despite their potential, existing diffusion models struggle with inefficiencies as they map Gaussian noise to real point clouds, overlooking the geometric information inherent in sparse point clouds. To address these inefficiencies, we propose PUFM, a f… ▽ More Diffusion models are a powerful framework for tackling ill-posed problems, with recent advancements extending their use to point cloud upsampling. Despite their potential, existing diffusion models struggle with inefficiencies as they map Gaussian noise to real point clouds, overlooking the geometric information inherent in sparse point clouds. To address these inefficiencies, we propose PUFM, a flow matching approach to directly map sparse point clouds to their high-fidelity dense counterparts. Our method first employs midpoint interpolation to sparse point clouds, resolving the density mismatch between sparse and dense point clouds. Since point clouds are unordered representations, we introduce a pre-alignment method based on Earth Mover's Distance (EMD) optimization to ensure coherent interpolation between sparse and dense point clouds, which enables a more stable learning path in flow matching. Experiments on synthetic datasets demonstrate that our method delivers superior upsampling quality but with fewer sampling steps. Further experiments on ScanNet and KITTI also show that our approach generalizes well on RGB-D point clouds and LiDAR point clouds, making it more practical for real-world applications. △ Less

Submitted 25 January, 2025; originally announced January 2025.

Comments: 9 pages, 8 figures

Fluid Antennas: Reshaping Intrinsic Properties for Flexible Radiation Characteristics in Intelligent Wireless Networks

Authors: Wen-Jun Lu, Chun-Xing He, Yongxu Zhu, Kin-Fai Tong, Kai-Kit Wong, Hyundong Shin, Tie Jun Cui

Abstract: Fluid antennas present a relatively new idea for harnessing the fading and interference issues in multiple user wireless systems, such as 6G. Here, we systematically compare their unique radiation beam forming mechanism to the existing multiple-antenna systems in a wireless system. Subsequently, a unified mathematical model for fluid antennas is deduced based on the eigenmode theory. As mathematic… ▽ More Fluid antennas present a relatively new idea for harnessing the fading and interference issues in multiple user wireless systems, such as 6G. Here, we systematically compare their unique radiation beam forming mechanism to the existing multiple-antenna systems in a wireless system. Subsequently, a unified mathematical model for fluid antennas is deduced based on the eigenmode theory. As mathematically derived from the multimode resonant theory, the spectral expansion model of any antennas which occupy variable spaces and have changeable feeding schemes can be generalized as fluid antennas. Non-liquid and liquid fluid antenna examples are presented, simulated and discussed. The symmetry or modal parity of eigenmodes is explored as an additional degree of freedom to design the fluid antennas for future wireless systems. As conceptually deduced and illustrated, the multi-dimensional and continuously adaptive ability of eigenmodes can be considered as the most fundamental intrinsic characteristic of the fluid antenna systems. It opens an uncharted area in the developments of intelligent antennas (IAs), which brings more flexibility to on-demand antenna beam null manipulating techniques for future wireless applications. △ Less

Submitted 6 January, 2025; originally announced January 2025.

Unlocking adaptive digital pathology through dynamic feature learning

Authors: Jiawen Li, Tian Guan, Qingxin Xia, Yizhi Wang, Xitong Ling, Jing Li, Qiang Huang, Zihan Wang, Zhiyuan Shen, Yifei Ma, Zimo Zhao, Zhe Lei, Tiandong Chen, Junbo Tan, Xueqian Wang, Xiu-Wu Bian, Zhe Wang, Lingchuan Guo, Chao He, Yonghong He

Abstract: Foundation models have revolutionized the paradigm of digital pathology, as they leverage general-purpose features to emulate real-world pathological practices, enabling the quantitative analysis of critical histological patterns and the dissection of cancer-specific signals. However, these static general features constrain the flexibility and pathological relevance in the ever-evolving needs of c… ▽ More Foundation models have revolutionized the paradigm of digital pathology, as they leverage general-purpose features to emulate real-world pathological practices, enabling the quantitative analysis of critical histological patterns and the dissection of cancer-specific signals. However, these static general features constrain the flexibility and pathological relevance in the ever-evolving needs of clinical applications, hindering the broad use of the current models. Here we introduce PathFiT, a dynamic feature learning method that can be effortlessly plugged into various pathology foundation models to unlock their adaptability. Meanwhile, PathFiT performs seamless implementation across diverse pathology applications regardless of downstream specificity. To validate PathFiT, we construct a digital pathology benchmark with over 20 terabytes of Internet and real-world data comprising 28 H\&E-stained tasks and 7 specialized imaging tasks including Masson's Trichrome staining and immunofluorescence images. By applying PathFiT to the representative pathology foundation models, we demonstrate state-of-the-art performance on 34 out of 35 tasks, with significant improvements on 23 tasks and outperforming by 10.20% on specialized imaging tasks. The superior performance and versatility of PathFiT open up new avenues in computational pathology. △ Less

Submitted 29 December, 2024; originally announced December 2024.

Comments: 49 pages, 14 figures

Optimized Cryo-CMOS Technology with VTH<0.2V and Ion>1.2mA/um for High-Peformance Computing

Authors: Chang He, Yue Xin, Longfei Yang, Zewei Wang, Zhidong Tang, Xin Luo, Renhe Chen, Zirui Wang, Shuai Kong, Jianli Wang, Jianshi Tang, Xiaoxu Kang, Shoumian Chen, Yuhang Zhao, Shaojian Hu, Xufeng Kou

Abstract: We report the design-technology co-optimization (DTCO) scheme to develop a 28-nm cryogenic CMOS (Cryo-CMOS) technology for high-performance computing (HPC). The precise adjustment of halo implants manages to compensate the threshold voltage (VTH) shift at low temperatures. The optimized NMOS and PMOS transistors, featured by VTH<0.2V, sub-threshold swing (SS)<30 mV/dec, and on-state current (Ion)>… ▽ More We report the design-technology co-optimization (DTCO) scheme to develop a 28-nm cryogenic CMOS (Cryo-CMOS) technology for high-performance computing (HPC). The precise adjustment of halo implants manages to compensate the threshold voltage (VTH) shift at low temperatures. The optimized NMOS and PMOS transistors, featured by VTH<0.2V, sub-threshold swing (SS)<30 mV/dec, and on-state current (Ion)>1.2mA/um at 77K, warrant a reliable sub-0.6V operation. Moreover, the enhanced driving strength of Cryo-CMOS inherited from a higher transconductance leads to marked improvements in elevating the ring oscillator frequency by 20%, while reducing the power consumption of the compute-intensive cryogenic IC system by 37% at 77K. △ Less

Submitted 5 November, 2024; originally announced November 2024.

Positioning Error Compensation by Channel Knowledge Map in UAV Communication Missions

Authors: Chiya Zhang, Ting Wang, Chunlong He

Abstract: When Unmanned Aerial Vehicles (UAVs) perform high-precision communication tasks, such as searching for users and providing emergency coverage, positioning errors between base stations and users make it challenging to deploy trajectory planning algorithms. To address these challenges caused by position errors, a framework was proposed to compensate it by Channel Knowledge Map (CKM), which stores ch… ▽ More When Unmanned Aerial Vehicles (UAVs) perform high-precision communication tasks, such as searching for users and providing emergency coverage, positioning errors between base stations and users make it challenging to deploy trajectory planning algorithms. To address these challenges caused by position errors, a framework was proposed to compensate it by Channel Knowledge Map (CKM), which stores channel state information (CSI). By taking the positions with errors as input, the generated CKM could give a prediction of signal attenuation which is close to true positions. Based on that, the predictions are utilized to calculate the received power and a PPO-based algorithm is applied to optimize the compensation. After training, the framework is able to find a strategy that minimize the flight time under communication constraints and positioning error. Besides, the confidence interval is calculated to assist the allocation of power and the update of CKM is studied to adapt to the dynamic environment. Simulation results show the robustness of CKM to positioning error and environmental changes, and the superiority of CKM-assisted UAV communication design. △ Less

Submitted 24 September, 2024; originally announced September 2024.

Transmissive RIS Enabled Transceiver Systems:Architecture, Design Issues and Opportunities

Authors: Zhendong Li, Wen Chen, Qingqing Wu, Ziwei Liu, Chong He, Xudong Bai, Jun Li

Abstract: Reconfigurable intelligent surface (RIS) is anticipated to augment the performance of beyond fifth-generation (B5G) and sixth-generation (6G) networks by intelligently manipulating the state of its components. Rather than employing reflective RIS for aided communications, this paper proposes an innovative transmissive RIS-enabled transceiver (TRTC) architecture that can accomplish the functions of… ▽ More Reconfigurable intelligent surface (RIS) is anticipated to augment the performance of beyond fifth-generation (B5G) and sixth-generation (6G) networks by intelligently manipulating the state of its components. Rather than employing reflective RIS for aided communications, this paper proposes an innovative transmissive RIS-enabled transceiver (TRTC) architecture that can accomplish the functions of traditional multi-antenna systems in a cost-effective and energy-efficient manner. First, the proposed network architecture and its corresponding transmission scheme are elaborated from the perspectives of downlink (DL) and uplink (UL) transmissions. Then, we illustrate several significant advantages and differences of TRTC compared to other multiantenna systems. Furthermore, the downlink modulation and extraction principle based on time-modulation array (TMA) is introduced in detail to tackle the multi-stream communications. Moreover, a near-far field channel model appropriate for this architecture is proposed. Based on the channel model, we summarize some state-of-the-art channel estimation schemes, and the channel estimation scheme of TRTC is also provided. Considering the optimization for DL and UL communications, we present numerical simulations that confirm the superiority of the proposed optimization algorithm. Lastly, numerous prospective research avenues for TRTC systems are delineated to inspire further exploration. △ Less

Submitted 24 August, 2024; originally announced August 2024.

Journal ref: IEEE VTM, 2024

AIM 2024 Challenge on Compressed Video Quality Assessment: Methods and Results

Authors: Maksim Smirnov, Aleksandr Gushchin, Anastasia Antsiferova, Dmitry Vatolin, Radu Timofte, Ziheng Jia, Zicheng Zhang, Wei Sun, Jiaying Qian, Yuqin Cao, Yinan Sun, Yuxin Zhu, Xiongkuo Min, Guangtao Zhai, Kanjar De, Qing Luo, Ao-Xiang Zhang, Peng Zhang, Haibo Lei, Linyan Jiang, Yaqing Li, Wenhui Meng, Zhenzhong Chen, Zhengxue Cheng, Jiahao Xiao , et al. (7 additional authors not shown)

Abstract: Video quality assessment (VQA) is a crucial task in the development of video compression standards, as it directly impacts the viewer experience. This paper presents the results of the Compressed Video Quality Assessment challenge, held in conjunction with the Advances in Image Manipulation (AIM) workshop at ECCV 2024. The challenge aimed to evaluate the performance of VQA methods on a diverse dat… ▽ More Video quality assessment (VQA) is a crucial task in the development of video compression standards, as it directly impacts the viewer experience. This paper presents the results of the Compressed Video Quality Assessment challenge, held in conjunction with the Advances in Image Manipulation (AIM) workshop at ECCV 2024. The challenge aimed to evaluate the performance of VQA methods on a diverse dataset of 459 videos, encoded with 14 codecs of various compression standards (AVC/H.264, HEVC/H.265, AV1, and VVC/H.266) and containing a comprehensive collection of compression artifacts. To measure the methods performance, we employed traditional correlation coefficients between their predictions and subjective scores, which were collected via large-scale crowdsourced pairwise human comparisons. For training purposes, participants were provided with the Compressed Video Quality Assessment Dataset (CVQAD), a previously developed dataset of 1022 videos. Up to 30 participating teams registered for the challenge, while we report the results of 6 teams, which submitted valid final solutions and code for reproducing the results. Moreover, we calculated and present the performance of state-of-the-art VQA methods on the developed dataset, providing a comprehensive benchmark for future research. The dataset, results, and online leaderboard are publicly available at https://challenges.videoprocessing.ai/challenges/compressedvideo-quality-assessment.html. △ Less

Submitted 22 October, 2024; v1 submitted 21 August, 2024; originally announced August 2024.

Data-Efficient Prediction of Minimum Operating Voltage via Inter- and Intra-Wafer Variation Alignment

Authors: Yuxuan Yin, Rebecca Chen, Chen He, Peng Li

Abstract: Predicting the minimum operating voltage ($V_{min}$) of chips stands as a crucial technique in enhancing the speed and reliability of manufacturing testing flow. However, existing $V_{min}$ prediction methods often overlook various sources of variations in both training and deployment phases. Notably, the neglect of wafer zone-to-zone (intra-wafer) variations and wafer-to-wafer (inter-wafer) varia… ▽ More Predicting the minimum operating voltage ($V_{min}$) of chips stands as a crucial technique in enhancing the speed and reliability of manufacturing testing flow. However, existing $V_{min}$ prediction methods often overlook various sources of variations in both training and deployment phases. Notably, the neglect of wafer zone-to-zone (intra-wafer) variations and wafer-to-wafer (inter-wafer) variations, compounded by process variations, diminishes the accuracy, data efficiency, and reliability of $V_{min}$ predictors. To address this gap, we introduce a novel data-efficient $V_{min}$ prediction flow, termed restricted bias alignment (RBA), which incorporates a novel variation alignment technique. Our approach concurrently estimates inter- and intra-wafer variations. Furthermore, we propose utilizing class probe data to model inter-wafer variations for the first time. We empirically demonstrate RBA's effectiveness and data efficiency on an industrial 16nm automotive chip dataset. △ Less

Submitted 12 August, 2024; originally announced August 2024.

Edge Learning Based Collaborative Automatic Modulation Classification for Hierarchical Cognitive Radio Networks

Authors: Peihao Dong, Chaowei He, Shen Gao, Fuhui Zhou, Qihui Wu

Abstract: In hierarchical cognitive radio networks, edge or cloud servers utilize the data collected by edge devices for modulation classification, which, however, is faced with problems of the computation load, transmission overhead, and data privacy. In this article, an edge learning (EL) based framework jointly mobilizing the edge device and the edge server for intelligent co-inference is proposed to rea… ▽ More In hierarchical cognitive radio networks, edge or cloud servers utilize the data collected by edge devices for modulation classification, which, however, is faced with problems of the computation load, transmission overhead, and data privacy. In this article, an edge learning (EL) based framework jointly mobilizing the edge device and the edge server for intelligent co-inference is proposed to realize the collaborative automatic modulation classification (C-AMC) between them. A spectrum semantic compression neural network is designed for the edge device to compress the collected raw data into a compact semantic embedding that is then sent to the edge server via the wireless channel. On the edge server side, a modulation classification neural network combining the bidirectional long-short term memory and attention structures is elaborated to determine the modulation type from the noisy semantic embedding. The C-AMC framework decently balances the computation resources of both sides while avoiding the high transmission overhead and data privacy leakage. Both the offline and online training procedures of the C-AMC framework are elaborated. The compression strategy of the C-AMC framework is also developed to further facilitate the deployment, especially for the resource-constrained edge device. Simulation results show the superiority of the EL-based C-AMC framework in terms of the classification accuracy, computational complexity, and the data compression rate as well as reveal useful insights paving the practical implementation. △ Less

Submitted 30 July, 2024; originally announced July 2024.

Comments: Accepted by IEEE Internet of Things Journal

Classification of Power Quality Disturbances Using Resnet with Channel Attention Mechanism

Authors: Su Pan, Xingyang Nie, Xiaoyu Zhai, Biao Wang, Huilin Ge, Cheng He, Zhenping Ding

Abstract: The detection and classification of power quality disturbances (PQDs) carries significant importance for power systems. In response to this imperative, numerous intelligent diagnostic methods have been developed. However, existing identification methods usually concentrate on single-type signals or on complex signals with two types, rendering them susceptible to noisy labels and environmental effe… ▽ More The detection and classification of power quality disturbances (PQDs) carries significant importance for power systems. In response to this imperative, numerous intelligent diagnostic methods have been developed. However, existing identification methods usually concentrate on single-type signals or on complex signals with two types, rendering them susceptible to noisy labels and environmental effects. This study proposes a novel method for the classification of PQDs, termed ST-GSResNet, which utilizes the S-Transform and an improved residual neural network (ResNet) with a channel attention mechanism. The ST-GSResNet approach initially uses the S-Transform to transform a time-series signal into a 2D time-frequency image for feature enhancement. Then, an improved ResNet model is introduced, which employs grouped convolution instead of the traditional convolution operation. This improvement aims to facilitate learning with a block-diagonal structured sparsity on the channel dimension, the highly-correlated filters are learned in a more structured way in the networks with filter groups. By reducing the number of parameters in the network in this significant manner, the model becomes less prone to overfitting. Furthermore, the SE module concentrates on primary components, which enhances the model's robustness in recognition and immunity to noise. Experimental results demonstrate that, compared to existing deep learning models, our approach has advantages in computational efficiency and classification accuracy. △ Less

Submitted 2 July, 2024; originally announced July 2024.

Reliable Interval Prediction of Minimum Operating Voltage Based on On-chip Monitors via Conformalized Quantile Regression

Authors: Yuxuan Yin, Xiaoxiao Wang, Rebecca Chen, Chen He, Peng Li

Abstract: Predicting the minimum operating voltage ($V_{min}$) of chips is one of the important techniques for improving the manufacturing testing flow, as well as ensuring the long-term reliability and safety of in-field systems. Current $V_{min}$ prediction methods often provide only point estimates, necessitating additional techniques for constructing prediction confidence intervals to cover uncertaintie… ▽ More Predicting the minimum operating voltage ($V_{min}$) of chips is one of the important techniques for improving the manufacturing testing flow, as well as ensuring the long-term reliability and safety of in-field systems. Current $V_{min}$ prediction methods often provide only point estimates, necessitating additional techniques for constructing prediction confidence intervals to cover uncertainties caused by different sources of variations. While some existing techniques offer region predictions, but they rely on certain distributional assumptions and/or provide no coverage guarantees. In response to these limitations, we propose a novel distribution-free $V_{min}$ interval estimation methodology possessing a theoretical guarantee of coverage. Our approach leverages conformalized quantile regression and on-chip monitors to generate reliable prediction intervals. We demonstrate the effectiveness of the proposed method on an industrial 5nm automotive chip dataset. Moreover, we show that the use of on-chip monitors can reduce the interval length significantly for $V_{min}$ prediction. △ Less

Submitted 3 May, 2024; originally announced June 2024.

Comments: Accepted by DATE 2024. Camera-ready version

Modulated differentiable STFT and balanced spectrum metric for freight train wheelset bearing cross-machine transfer monitoring under speed fluctuations

Authors: Chao He, Hongmei Shi, Ruixin Li, Jianbo Li, ZuJun Yu

Abstract: The service conditions of wheelset bearings has a direct impact on the safe operation of railway heavy haul freight trains as the key components. However, speed fluctuation of the trains and few fault samples are the two main problems that restrict the accuracy of bearing fault diagnosis. Therefore, a cross-machine transfer diagnosis (pyDSN) network coupled with interpretable modulated differentia… ▽ More The service conditions of wheelset bearings has a direct impact on the safe operation of railway heavy haul freight trains as the key components. However, speed fluctuation of the trains and few fault samples are the two main problems that restrict the accuracy of bearing fault diagnosis. Therefore, a cross-machine transfer diagnosis (pyDSN) network coupled with interpretable modulated differentiable short-time Fourier transform (STFT) and physics-informed balanced spectrum quality metric is proposed to learn domain-invariant and discriminative features under time-varying speeds. Firstly, due to insufficiency in extracting extract frequency components of time-varying speed signals using fixed windows, a modulated differentiable STFT (MDSTFT) that is interpretable with STFT-informed theoretical support, is proposed to extract the robust time-frequency spectrum (TFS). During training process, multiple windows with different lengths dynamically change. Also, in addition to the classification metric and domain discrepancy metric, we creatively introduce a third kind of metric, referred to as the physics-informed metric, to enhance transferable TFS. A physics-informed balanced spectrum quality (BSQ) regularization loss is devised to guide an optimization direction for MDSTFT and model. With it, not only can model acquire high-quality TFS, but also a physics-restricted domain adaptation network can be also acquired, making it learn real-world physics knowledge, ultimately diminish the domain discrepancy across different datasets. The experiment is conducted in the scenario of migrating from the laboratory datasets to the freight train dataset, indicating that the hybrid-driven pyDSN outperforms existing methods and has practical value. △ Less

Submitted 26 May, 2025; v1 submitted 16 June, 2024; originally announced June 2024.

Comments: This manuscript has been accepted and published by Advanced Engineering Informatics. Revised the title of the manuscript

Journal ref: Advanced Engineering Informatics 62 (2024) 102568

Eco-driving Accounting for Interactive Cut-in Vehicles

Authors: Chaozhe R. He, Nan Li

Abstract: Automated vehicles can gather information about surrounding traffic and plan safe and energy-efficient driving behavior, which is known as eco-driving. Conventional eco-driving designs only consider preceding vehicles in the same lane as the ego vehicle. In heavy traffic, however, vehicles in adjacent lanes may cut into the ego vehicle's lane, influencing the ego vehicle's eco-driving behavior and… ▽ More Automated vehicles can gather information about surrounding traffic and plan safe and energy-efficient driving behavior, which is known as eco-driving. Conventional eco-driving designs only consider preceding vehicles in the same lane as the ego vehicle. In heavy traffic, however, vehicles in adjacent lanes may cut into the ego vehicle's lane, influencing the ego vehicle's eco-driving behavior and compromising the energy-saving performance. Therefore, in this paper, we propose an eco-driving design that accounts for neighbor vehicles that have cut-in intentions. Specifically, we integrate a leader-follower game to predict the interaction between the ego and the cut-in vehicles and a model-predictive controller for planning energy-efficient behavior for the automated ego vehicle. We show that the leader-follower game model can reasonably represent the interactive motion between the ego vehicle and the cut-in vehicle. More importantly, we show that the proposed design can predict and react to neighbor vehicles' cut-in behaviors properly, leading to improved energy efficiency in cut-in scenarios compared to baseline designs that consider preceding vehicles only. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Comments: Accepted at 2024 IEEE International Conference on Mobility: Operations, Services, and Technologies (MOST)

Classifier-guided neural blind deconvolution: a physics-informed denoising module for bearing fault diagnosis under heavy noise

Authors: Jing-Xiao Liao, Chao He, Jipu Li, Jinwei Sun, Shiping Zhang, Xiaoge Zhang

Abstract: Blind deconvolution (BD) has been demonstrated as an efficacious approach for extracting bearing fault-specific features from vibration signals under strong background noise. Despite BD's desirable feature in adaptability and mathematical interpretability, a significant challenge persists: How to effectively integrate BD with fault-diagnosing classifiers? This issue arises because the traditional… ▽ More Blind deconvolution (BD) has been demonstrated as an efficacious approach for extracting bearing fault-specific features from vibration signals under strong background noise. Despite BD's desirable feature in adaptability and mathematical interpretability, a significant challenge persists: How to effectively integrate BD with fault-diagnosing classifiers? This issue arises because the traditional BD method is solely designed for feature extraction with its own optimizer and objective function. When BD is combined with downstream deep learning classifiers, the different learning objectives will be in conflict. To address this problem, this paper introduces classifier-guided BD (ClassBD) for joint learning of BD-based feature extraction and deep learning-based fault classification. Firstly, we present a time and frequency neural BD that employs neural networks to implement conventional BD, thereby facilitating the seamless integration of BD and the deep learning classifier for co-optimization of model parameters. Subsequently, we develop a unified framework to use a deep learning classifier to guide the learning of BD filters. In addition, we devise a physics-informed loss function composed of kurtosis, $l_2/l_4$ norm, and a cross-entropy loss to jointly optimize the BD filters and deep learning classifier. Consequently, the fault labels provide useful information to direct BD to extract features that distinguish classes amidst strong noise. To the best of our knowledge, this is the first of its kind that BD is successfully applied to bearing fault diagnosis. Experimental results from three datasets demonstrate that ClassBD outperforms other state-of-the-art methods under noisy conditions. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Guaranteed Completion of Complex Tasks via Temporal Logic Trees and Hamilton-Jacobi Reachability

Authors: Frank J. Jiang, Kaj Munhoz Arfvidsson, Chong He, Mo Chen, Karl H. Johansson

Abstract: In this paper, we present an approach for guaranteeing the completion of complex tasks with cyber-physical systems (CPS). Specifically, we leverage temporal logic trees constructed using Hamilton-Jacobi reachability analysis to (1) check for the existence of control policies that complete a specified task and (2) develop a computationally-efficient approach to synthesize the full set of control in… ▽ More In this paper, we present an approach for guaranteeing the completion of complex tasks with cyber-physical systems (CPS). Specifically, we leverage temporal logic trees constructed using Hamilton-Jacobi reachability analysis to (1) check for the existence of control policies that complete a specified task and (2) develop a computationally-efficient approach to synthesize the full set of control inputs the CPS can implement in real-time to ensure the task is completed. We show that, by checking the approximation directions of each state set in the temporal logic tree, we can check if the temporal logic tree suffers from the "leaking corner issue," where the intersection of reachable sets yields an incorrect approximation. By ensuring a temporal logic tree has no leaking corners, we know the temporal logic tree correctly verifies the existence of control policies that satisfy the specified task. After confirming the existence of control policies, we show that we can leverage the value functions obtained through Hamilton-Jacobi reachability analysis to efficiently compute the set of control inputs the CPS can implement throughout the deployment time horizon to guarantee the completion of the specified task. Finally, we use a newly released Python toolbox to evaluate the presented approach on a simulated driving task. △ Less

Submitted 12 April, 2024; originally announced April 2024.

An edge detection-based deep learning approach for tear meniscus height measurement

Authors: Kesheng Wang, Kunhui Xu, Xiaoyu Chen, Chunlei He, Jianfeng Zhang, Dexing Kong, Qi Dai, Shoujun Huang

Abstract: Automatic measurements of tear meniscus height (TMH) have been achieved by using deep learning techniques; however, annotation is significantly influenced by subjective factors and is both time-consuming and labor-intensive. In this paper, we introduce an automatic TMH measurement technique based on edge detection-assisted annotation within a deep learning framework. This method generates mask lab… ▽ More Automatic measurements of tear meniscus height (TMH) have been achieved by using deep learning techniques; however, annotation is significantly influenced by subjective factors and is both time-consuming and labor-intensive. In this paper, we introduce an automatic TMH measurement technique based on edge detection-assisted annotation within a deep learning framework. This method generates mask labels less affected by subjective factors with enhanced efficiency compared to previous annotation approaches. For improved segmentation of the pupil and tear meniscus areas, the convolutional neural network Inceptionv3 was first implemented as an image quality assessment model, effectively identifying higher-quality images with an accuracy of 98.224%. Subsequently, by using the generated labels, various algorithms, including Unet, ResUnet, Deeplabv3+FcnResnet101, Deeplabv3+FcnResnet50, FcnResnet50, and FcnResnet101 were trained, with Unet demonstrating the best performance. Finally, Unet was used for automatic pupil and tear meniscus segmentation to locate the center of the pupil and calculate TMH,respectively. An evaluation of the mask quality predicted by Unet indicated a Mean Intersection over Union of 0.9362, a recall of 0.9261, a precision of 0.9423, and an F1-Score of 0.9326. Additionally, the TMH predicted by the model was assessed, with the fitting curve represented as y= 0.982x-0.862, an overall correlation coefficient of r^2=0.961 , and an accuracy of 94.80% (237/250). In summary, the algorithm can automatically screen images based on their quality,segment the pupil and tear meniscus areas, and automatically measure TMH. Measurement results using the AI algorithm demonstrate a high level of consistency with manual measurements, offering significant support to clinical doctors in diagnosing dry eye disease. △ Less

Submitted 23 March, 2024; originally announced March 2024.

Comments: 22 pages, 5 figures

VoxGenesis: Unsupervised Discovery of Latent Speaker Manifold for Speech Synthesis

Authors: Weiwei Lin, Chenhang He, Man-Wai Mak, Jiachen Lian, Kong Aik Lee

Abstract: Achieving nuanced and accurate emulation of human voice has been a longstanding goal in artificial intelligence. Although significant progress has been made in recent years, the mainstream of speech synthesis models still relies on supervised speaker modeling and explicit reference utterances. However, there are many aspects of human voice, such as emotion, intonation, and speaking style, for whic… ▽ More Achieving nuanced and accurate emulation of human voice has been a longstanding goal in artificial intelligence. Although significant progress has been made in recent years, the mainstream of speech synthesis models still relies on supervised speaker modeling and explicit reference utterances. However, there are many aspects of human voice, such as emotion, intonation, and speaking style, for which it is hard to obtain accurate labels. In this paper, we propose VoxGenesis, a novel unsupervised speech synthesis framework that can discover a latent speaker manifold and meaningful voice editing directions without supervision. VoxGenesis is conceptually simple. Instead of mapping speech features to waveforms deterministically, VoxGenesis transforms a Gaussian distribution into speech distributions conditioned and aligned by semantic tokens. This forces the model to learn a speaker distribution disentangled from the semantic content. During the inference, sampling from the Gaussian distribution enables the creation of novel speakers with distinct characteristics. More importantly, the exploration of latent space uncovers human-interpretable directions associated with specific speaker characteristics such as gender attributes, pitch, tone, and emotion, allowing for voice editing by manipulating the latent codes along these identified directions. We conduct extensive experiments to evaluate the proposed VoxGenesis using both subjective and objective metrics, finding that it produces significantly more diverse and realistic speakers with distinct characteristics than the previous approaches. We also show that latent space manipulation produces consistent and human-identifiable effects that are not detrimental to the speech quality, which was not possible with previous approaches. Audio samples of VoxGenesis can be found at: \url{https://bit.ly/VoxGenesis}. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Comments: preprint

SongComposer: A Large Language Model for Lyric and Melody Generation in Song Composition

Authors: Shuangrui Ding, Zihan Liu, Xiaoyi Dong, Pan Zhang, Rui Qian, Junhao Huang, Conghui He, Dahua Lin, Jiaqi Wang

Abstract: Creating lyrics and melodies for the vocal track in a symbolic format, known as song composition, demands expert musical knowledge of melody, an advanced understanding of lyrics, and precise alignment between them. Despite achievements in sub-tasks such as lyric generation, lyric-to-melody, and melody-to-lyric, etc, a unified model for song composition has not yet been achieved. In this paper, we… ▽ More Creating lyrics and melodies for the vocal track in a symbolic format, known as song composition, demands expert musical knowledge of melody, an advanced understanding of lyrics, and precise alignment between them. Despite achievements in sub-tasks such as lyric generation, lyric-to-melody, and melody-to-lyric, etc, a unified model for song composition has not yet been achieved. In this paper, we introduce SongComposer, a pioneering step towards a unified song composition model that can readily create symbolic lyrics and melodies following instructions. SongComposer is a music-specialized large language model (LLM) that, for the first time, integrates the capability of simultaneously composing lyrics and melodies into LLMs by leveraging three key innovations: 1) a flexible tuple format for word-level alignment of lyrics and melodies, 2) an extended tokenizer vocabulary for song notes, with scalar initialization based on musical knowledge to capture rhythm, and 3) a multi-stage pipeline that captures musical structure, starting with motif-level melody patterns and progressing to phrase-level structure for improved coherence. Extensive experiments demonstrate that SongComposer outperforms advanced LLMs, including GPT-4, in tasks such as lyric-to-melody generation, melody-to-lyric generation, song continuation, and text-to-song creation. Moreover, we will release SongCompose, a large-scale dataset for training, containing paired lyrics and melodies in Chinese and English. △ Less

Submitted 30 May, 2025; v1 submitted 27 February, 2024; originally announced February 2024.

Comments: ACL 2025 main. project page: https://pjlab-songcomposer.github.io/ code: https://github.com/pjlab-songcomposer/songcomposer

Optimal Time of Arrival Estimation for MIMO Backscatter Channels

Authors: Chen He, Luyang Han, Z. Jane Wang

Abstract: In this paper, we propose a novel time of arrival (TOA) estimator for multiple-input-multiple-output (MIMO) backscatter channels in closed form. The proposed estimator refines the estimation precision from the topological structure of the MIMO backscatter channels, and can considerably enhance the estimation accuracy. Particularly, we show that for the general $M \times N$ bistatic topology, the m… ▽ More In this paper, we propose a novel time of arrival (TOA) estimator for multiple-input-multiple-output (MIMO) backscatter channels in closed form. The proposed estimator refines the estimation precision from the topological structure of the MIMO backscatter channels, and can considerably enhance the estimation accuracy. Particularly, we show that for the general $M \times N$ bistatic topology, the mean square error (MSE) is $\frac{M+N-1}{MN}σ^2_0$, and for the general $M \times M$ monostatic topology, it is $\frac{2M-1}{M^2}σ^2_0$ for the diagonal subchannels, and $\frac{M-1}{M^2}σ^2_0$ for the off-diagonal subchannels, where $σ^2_0$ is the MSE of the conventional least square estimator. In addition, we derive the Cramer-Rao lower bound (CRLB) for MIMO backscatter TOA estimation which indicates that the proposed estimator is optimal. Simulation results verify that the proposed TOA estimator can considerably improve both estimation and positioning accuracy, especially when the MIMO scale is large. △ Less

Submitted 22 November, 2023; originally announced November 2023.

HQG-Net: Unpaired Medical Image Enhancement with High-Quality Guidance

Authors: Chunming He, Kai Li, Guoxia Xu, Jiangpeng Yan, Longxiang Tang, Yulun Zhang, Xiu Li, Yaowei Wang

Abstract: Unpaired Medical Image Enhancement (UMIE) aims to transform a low-quality (LQ) medical image into a high-quality (HQ) one without relying on paired images for training. While most existing approaches are based on Pix2Pix/CycleGAN and are effective to some extent, they fail to explicitly use HQ information to guide the enhancement process, which can lead to undesired artifacts and structural distor… ▽ More Unpaired Medical Image Enhancement (UMIE) aims to transform a low-quality (LQ) medical image into a high-quality (HQ) one without relying on paired images for training. While most existing approaches are based on Pix2Pix/CycleGAN and are effective to some extent, they fail to explicitly use HQ information to guide the enhancement process, which can lead to undesired artifacts and structural distortions. In this paper, we propose a novel UMIE approach that avoids the above limitation of existing methods by directly encoding HQ cues into the LQ enhancement process in a variational fashion and thus model the UMIE task under the joint distribution between the LQ and HQ domains. Specifically, we extract features from an HQ image and explicitly insert the features, which are expected to encode HQ cues, into the enhancement network to guide the LQ enhancement with the variational normalization module. We train the enhancement network adversarially with a discriminator to ensure the generated HQ image falls into the HQ domain. We further propose a content-aware loss to guide the enhancement process with wavelet-based pixel-level and multi-encoder-based feature-level constraints. Additionally, as a key motivation for performing image enhancement is to make the enhanced images serve better for downstream tasks, we propose a bi-level learning scheme to optimize the UMIE task and downstream tasks cooperatively, helping generate HQ images both visually appealing and favorable for downstream tasks. Experiments on three medical datasets, including two newly collected datasets, verify that the proposed method outperforms existing techniques in terms of both enhancement quality and downstream task performance. We will make the code and the newly collected datasets publicly available for community study. △ Less

Submitted 15 July, 2023; originally announced July 2023.

Comments: 14 pages, 10 figures

Enhancing Feature Extraction for Indoor Fingerprint Localization Using Diversified Data

Authors: Jiyu Jiao, Xiaojun Wang, Chenlin He

Abstract: Given the rapid advancements in wireless communication and terminal devices, high-speed and convenient WiFi has permeated various aspects of people's lives, and attention has been drawn to the location services that WiFi can provide. Fingerprint-based methods, as an excellent approach for localization, have gradually become a hot research topic. However, in practical localization, fingerprint feat… ▽ More Given the rapid advancements in wireless communication and terminal devices, high-speed and convenient WiFi has permeated various aspects of people's lives, and attention has been drawn to the location services that WiFi can provide. Fingerprint-based methods, as an excellent approach for localization, have gradually become a hot research topic. However, in practical localization, fingerprint features of traditional methods suffer from low reliability and lacking robustness in complex indoor environments. To overcome these limitations, this paper proposes a innovative feature extraction-enhanced intelligent localization scheme named Secci, based on diversified channel state information (CSI). By modifying the device driver, diversified CSI data are extracted and transformed into RGB CSI images, which serve as input to a deep convolutional neural network (DCNN) with SE attention mechanism-assisted training in the offline stage. Employing a greedy probabilistic approach, rapid prediction of the estimated location is performed in the online stage using test RGB CSI images. The Secci system is implemented using off-the-shelf WiFi devices, and comprehensive experiments are carried out in two representative indoor environments to showcase the superior performance of Secci compared to four existing algorithms. △ Less

Submitted 30 June, 2023; originally announced June 2023.

Harmonic enhancement using learnable comb filter for light-weight full-band speech enhancement model

Authors: Xiaohuai Le, Tong Lei, Li Chen, Yiqing Guo, Chao He, Cheng Chen, Xianjun Xia, Hua Gao, Yijian Xiao, Piao Ding, Shenyi Song, Jing Lu

Abstract: With fewer feature dimensions, filter banks are often used in light-weight full-band speech enhancement models. In order to further enhance the coarse speech in the sub-band domain, it is necessary to apply a post-filtering for harmonic retrieval. The signal processing-based comb filters used in RNNoise and PercepNet have limited performance and may cause speech quality degradation due to inaccura… ▽ More With fewer feature dimensions, filter banks are often used in light-weight full-band speech enhancement models. In order to further enhance the coarse speech in the sub-band domain, it is necessary to apply a post-filtering for harmonic retrieval. The signal processing-based comb filters used in RNNoise and PercepNet have limited performance and may cause speech quality degradation due to inaccurate fundamental frequency estimation. To tackle this problem, we propose a learnable comb filter to enhance harmonics. Based on the sub-band model, we design a DNN-based fundamental frequency estimator to estimate the discrete fundamental frequencies and a comb filter for harmonic enhancement, which are trained via an end-to-end pattern. The experiments show the advantages of our proposed method over PecepNet and DeepFilterNet. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: accepted by Interspeech 2023

SAR-to-Optical Image Translation via Thermodynamics-inspired Network

Authors: Mingjin Zhang, Jiamin Xu, Chengyu He, Wenteng Shang, Yunsong Li, Xinbo Gao

Abstract: Synthetic aperture radar (SAR) is prevalent in the remote sensing field but is difficult to interpret in human visual perception. Recently, SAR-to-optical (S2O) image conversion methods have provided a prospective solution for interpretation. However, since there is a huge domain difference between optical and SAR images, they suffer from low image quality and geometric distortion in the produced… ▽ More Synthetic aperture radar (SAR) is prevalent in the remote sensing field but is difficult to interpret in human visual perception. Recently, SAR-to-optical (S2O) image conversion methods have provided a prospective solution for interpretation. However, since there is a huge domain difference between optical and SAR images, they suffer from low image quality and geometric distortion in the produced optical images. Motivated by the analogy between pixels during the S2O image translation and molecules in a heat field, Thermodynamics-inspired Network for SAR-to-Optical Image Translation (S2O-TDN) is proposed in this paper. Specifically, we design a Third-order Finite Difference (TFD) residual structure in light of the TFD equation of thermodynamics, which allows us to efficiently extract inter-domain invariant features and facilitate the learning of the nonlinear translation mapping. In addition, we exploit the first law of thermodynamics (FLT) to devise an FLT-guided branch that promotes the state transition of the feature values from the unstable diffusion state to the stable one, aiming to regularize the feature diffusion and preserve image structures during S2O image translation. S2O-TDN follows an explicit design principle derived from thermodynamic theory and enjoys the advantage of explainability. Experiments on the public SEN1-2 dataset show the advantages of the proposed S2O-TDN over the current methods with more delicate textures and higher quantitative results. △ Less

Submitted 23 May, 2023; originally announced May 2023.

NODE-ImgNet: a PDE-informed effective and robust model for image denoising

Authors: Xinheng Xie, Yue Wu, Hao Ni, Cuiyu He

Abstract: Inspired by the traditional partial differential equation (PDE) approach for image denoising, we propose a novel neural network architecture, referred as NODE-ImgNet, that combines neural ordinary differential equations (NODEs) with convolutional neural network (CNN) blocks. NODE-ImgNet is intrinsically a PDE model, where the dynamic system is learned implicitly without the explicit specification… ▽ More Inspired by the traditional partial differential equation (PDE) approach for image denoising, we propose a novel neural network architecture, referred as NODE-ImgNet, that combines neural ordinary differential equations (NODEs) with convolutional neural network (CNN) blocks. NODE-ImgNet is intrinsically a PDE model, where the dynamic system is learned implicitly without the explicit specification of the PDE. This naturally circumvents the typical issues associated with introducing artifacts during the learning process. By invoking such a NODE structure, which can also be viewed as a continuous variant of a residual network (ResNet) and inherits its advantage in image denoising, our model achieves enhanced accuracy and parameter efficiency. In particular, our model exhibits consistent effectiveness in different scenarios, including denoising gray and color images perturbed by Gaussian noise, as well as real-noisy images, and demonstrates superiority in learning from small image datasets. △ Less

Submitted 6 November, 2023; v1 submitted 18 May, 2023; originally announced May 2023.

Self-supervised Neural Factor Analysis for Disentangling Utterance-level Speech Representations

Authors: Weiwei Lin, Chenhang He, Man-Wai Mak, Youzhi Tu

Abstract: Self-supervised learning (SSL) speech models such as wav2vec and HuBERT have demonstrated state-of-the-art performance on automatic speech recognition (ASR) and proved to be extremely useful in low label-resource settings. However, the success of SSL models has yet to transfer to utterance-level tasks such as speaker, emotion, and language recognition, which still require supervised fine-tuning of… ▽ More Self-supervised learning (SSL) speech models such as wav2vec and HuBERT have demonstrated state-of-the-art performance on automatic speech recognition (ASR) and proved to be extremely useful in low label-resource settings. However, the success of SSL models has yet to transfer to utterance-level tasks such as speaker, emotion, and language recognition, which still require supervised fine-tuning of the SSL models to obtain good performance. We argue that the problem is caused by the lack of disentangled representations and an utterance-level learning objective for these tasks. Inspired by how HuBERT uses clustering to discover hidden acoustic units, we formulate a factor analysis (FA) model that uses the discovered hidden acoustic units to align the SSL features. The underlying utterance-level representations are disentangled from the content of speech using probabilistic inference on the aligned features. Furthermore, the variational lower bound derived from the FA model provides an utterance-level objective, allowing error gradients to be backpropagated to the Transformer layers to learn highly discriminative acoustic units. When used in conjunction with HuBERT's masked prediction training, our models outperform the current best model, WavLM, on all utterance-level non-semantic tasks on the SUPERB benchmark with only 20% of labeled data. △ Less

Submitted 4 October, 2023; v1 submitted 14 May, 2023; originally announced May 2023.

Comments: accepted by ICML 2023

Personalized speech enhancement combining band-split RNN and speaker attentive module

Authors: Xiaohuai Le, Li Chen, Chao He, Yiqing Guo, Cheng Chen, Xianjun Xia, Jing Lu

Abstract: Target speaker information can be utilized in speech enhancement (SE) models to more effectively extract the desired speech. Previous works introduce the speaker embedding into speech enhancement models by means of concatenation or affine transformation. In this paper, we propose a speaker attentive module to calculate the attention scores between the speaker embedding and the intermediate feature… ▽ More Target speaker information can be utilized in speech enhancement (SE) models to more effectively extract the desired speech. Previous works introduce the speaker embedding into speech enhancement models by means of concatenation or affine transformation. In this paper, we propose a speaker attentive module to calculate the attention scores between the speaker embedding and the intermediate features, which are used to rescale the features. By merging this module in the state-of-the-art SE model, we construct the personalized SE model for ICASSP Signal Processing Grand Challenge: DNS Challenge 5 (2023). Our system achieves a final score of 0.529 on the blind test set of track1 and 0.549 on track2. △ Less

Submitted 16 March, 2023; v1 submitted 20 February, 2023; originally announced February 2023.

Experimental Validation of a Safe Controller Integration Scheme for Connected Automated Trucks

Authors: Anil Alan, Chaozhe R. He, Tamas G. Molnar, Johaan C. Mathew, A. Harvey Bell, Gabor Orosz

Abstract: Accomplishing safe and efficient driving is one of the predominant challenges in the controller design of connected automated vehicles (CAVs). It is often more convenient to address these goals separately and integrate the resulting controllers. In this study, we propose a controller integration scheme to fuse performance-based controllers and safety-oriented controllers safely for the longitudina… ▽ More Accomplishing safe and efficient driving is one of the predominant challenges in the controller design of connected automated vehicles (CAVs). It is often more convenient to address these goals separately and integrate the resulting controllers. In this study, we propose a controller integration scheme to fuse performance-based controllers and safety-oriented controllers safely for the longitudinal motion of a CAV. The resulting structure is compatible with a large class of controllers, and offers flexibility to design each controller individually without affecting the performance of the others. We implement the proposed safe integration scheme on a connected automated truck using an optimal-in-energy controller and a safety-oriented connected cruise controller. We validate the premise of the safe integration through experiments with a full-scale truck in two scenarios: a controlled experiment on a test track and a real-world experiment on a public highway. In both scenarios, we achieve energy efficient driving without violating safety. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Comments: 14 pages, 11 figures

Generic Cryo-CMOS Device Modeling and EDACompatible Platform for Reliable Cryogenic IC Design

Authors: Zhidong Tang, Zewei Wang, Yumeng Yuan, Chang He, Xin Luo, Ao Guo, Renhe Chen, Yongqi Hu, Longfei Yang, Chengwei Cao, Linlin Liu, Liujiang Yu, Ganbing Shang, Yongfeng Cao, Shoumian Chen, Yuhang Zhao, Shaojian Hu, Xufeng Kou

Abstract: This paper outlines the establishment of a generic cryogenic CMOS database in which key electrical parameters and transfer characteristics of the MOSFETs are quantified as functions of device size, temperature/frequency responses. Meanwhile, comprehensive device statistical study is conducted to evaluate the influence of variation and mismatch effects at low temperatures. Furthermore, by incorpora… ▽ More This paper outlines the establishment of a generic cryogenic CMOS database in which key electrical parameters and transfer characteristics of the MOSFETs are quantified as functions of device size, temperature/frequency responses. Meanwhile, comprehensive device statistical study is conducted to evaluate the influence of variation and mismatch effects at low temperatures. Furthermore, by incorporating the Cryo-CMOS compact model into the process design kit (PDK), the cryogenic 4 Kb SRAM, 5-bit flash ADC and 8-bit current steering DAC are designed, and their performance is readily investigated and optimized on the EDA-compatible platform, hence laying a solid foundation for large-scale cryogenic IC design. △ Less

Submitted 9 February, 2024; v1 submitted 9 November, 2022; originally announced November 2022.

Energy-efficient Reactive and Predictive Connected Cruise Control

Authors: Minghao Shen, R. Austin Dollar, Tamas G. Molnar, Chaozhe R. He, Ardalan Vahidi, Gabor Orosz

Abstract: In this paper, we propose a framework for the longitudinal control of connected and automated vehicles traveling in mixed traffic consisting of connected and non-connected human-driven vehicles. Reactive and predictive controllers are proposed. Reactive controllers are given by explicit feedback control laws. In predictive controllers, the control input is optimized in a receding-horizon fashion,… ▽ More In this paper, we propose a framework for the longitudinal control of connected and automated vehicles traveling in mixed traffic consisting of connected and non-connected human-driven vehicles. Reactive and predictive controllers are proposed. Reactive controllers are given by explicit feedback control laws. In predictive controllers, the control input is optimized in a receding-horizon fashion, which depends on the predictions of motions of preceding vehicles. Beyond-line-of-sight information is obtained via vehicle-to-vehicle (V2V) communication, and is utilized in the proposed reactive and predictive controllers. Simulations utilizing real traffic data are used to show that connectivity can bring significant energy savings. △ Less

Submitted 9 October, 2022; originally announced October 2022.

Comments: 18 pages, 12 figures, submitted to Transportation Research Part C: Emerging Technologies

Joint Precoding for Active Intelligent Transmitting Surface Empowered Outdoor-to-Indoor Communication in mmWave Cellular Networks

Authors: Xie Xie, Chen He, Feifei Gao, Zhu Han, Z. Jane Wang

Abstract: Outdoor-to-indoor communications in millimeter-wave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by the propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication system with the aid of an active intelligent transmitting surface (activ… ▽ More Outdoor-to-indoor communications in millimeter-wave (mmWave) cellular networks have been one challenging research problem due to the severe attenuation and the high penetration loss caused by the propagation characteristics of mmWave signals. We propose a viable solution to implement the outdoor-to-indoor mmWave communication system with the aid of an active intelligent transmitting surface (active-ITS), where the active-ITS allows the incoming signal from an outdoor base station (BS) to pass through the surface and be received by the indoor user-equipments (UEs) after shifting its phase and magnifying its amplitude. Then, the problem of joint precoding of the BS and active-ITS is investigated to maximize the weighted sum-rate (WSR) of the communication system. An efficient block coordinate descent (BCD) based algorithm is developed to solve it with the suboptimal solutions in nearly closed-forms. In addition, to reduce the size and hardware cost of an active-ITS, we provide a block-amplifying architecture to partially remove the circuit components for power-amplifying, where multiple transmissive-type elements (TEs) in each block share a same power amplifier. Simulations indicate that active-ITS has the potential of achieving a given performance with much fewer TEs compared to the passive-ITS under the same total system power consumption, which makes it suitable for application to the size-limited and aesthetic-needed scenario, and the inevitable performance degradation caused by the block-amplifying architecture is acceptable. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 30 pages, 8 figures

Control Barrier Functions and Input-to-State Safety with Application to Automated Vehicles

Authors: Anil Alan, Andrew J. Taylor, Chaozhe R. He, Aaron D. Ames, Gabor Orosz

Abstract: Balancing safety and performance is one of the predominant challenges in modern control system design. Moreover, it is crucial to robustly ensure safety without inducing unnecessary conservativeness that degrades performance. In this work we present a constructive approach for safety-critical control synthesis via Control Barrier Functions (CBF). By filtering a hand-designed controller via a CBF,… ▽ More Balancing safety and performance is one of the predominant challenges in modern control system design. Moreover, it is crucial to robustly ensure safety without inducing unnecessary conservativeness that degrades performance. In this work we present a constructive approach for safety-critical control synthesis via Control Barrier Functions (CBF). By filtering a hand-designed controller via a CBF, we are able to attain performant behavior while providing rigorous guarantees of safety. In the face of disturbances, robust safety and performance are simultaneously achieved through the notion of Input-to-State Safety (ISSf). We take a tutorial approach by developing the CBF-design methodology in parallel with an inverted pendulum example, making the challenges and sensitivities in the design process concrete. To establish the capability of the proposed approach, we consider the practical setting of safety-critical design via CBFs for a connected automated vehicle (CAV) in the form of a class-8 truck without a trailer. Through experimentation we see the impact of unmodeled disturbances in the truck's actuation system on the safety guarantees provided by CBFs. We characterize these disturbances and using ISSf, produce a robust controller that achieves safety without conceding performance. We evaluate our design both in simulation, and for the first time on an automotive system, experimentally. △ Less

Submitted 7 June, 2022; originally announced June 2022.

Comments: 16 pages, 16 figures

Energy-efficient Connected Cruise Control with Lean Penetration of Connected Vehicles

Authors: Minghao Shen, Chaozhe R. He, Tamas Molnar, A. Harvey Bell, Gabor Orosz

Abstract: This paper focuses on energy-efficient longitudinal controller design for a connected automated truck that travels in mixed traffic consisting of connected and non-connected vehicles. The truck has access to information about connected vehicles beyond line of sight using vehicle-to-vehicle (V2V) communication. A novel connected cruise control design is proposed which incorporates additional delays… ▽ More This paper focuses on energy-efficient longitudinal controller design for a connected automated truck that travels in mixed traffic consisting of connected and non-connected vehicles. The truck has access to information about connected vehicles beyond line of sight using vehicle-to-vehicle (V2V) communication. A novel connected cruise control design is proposed which incorporates additional delays into the control law when responding to distant connected vehicles to account for the finite propagation of traffic waves. The speeds of non-connected vehicles are modeled as stochastic processes. A fundamental theorem is proven which links the spectral properties of the motion signals to the average energy consumption. This enables us to tune controller parameters and maximize energy efficiency. Simulations with synthetic data and real traffic data are used to demonstrate the energy efficiency of the control design. It is demonstrated that even with lean penetration of connected vehicles, our controller can bring significant energy savings. △ Less

Submitted 6 May, 2022; originally announced May 2022.

Comments: This is submitted to IEEE Transactions on Intelligent Transportation Systems

Lensless coherent diffraction imaging based on spatial light modulator with unknown modulation curve

Authors: Hao Sha, Chao He, Shaowei Jiang, Pengming Song, Shuai Liu, Wenzhen Zou, Peiwu Qin, Haoqian Wang, Yongbing Zhang

Abstract: Lensless imaging is a popular research field for the advantages of small size, wide field-of-view and low aberration in recent years. However, some traditional lensless imaging methods suffer from slow convergence, mechanical errors and conjugate solution interference, which limit its further application and development. In this work, we proposed a lensless imaging method based on spatial light mo… ▽ More Lensless imaging is a popular research field for the advantages of small size, wide field-of-view and low aberration in recent years. However, some traditional lensless imaging methods suffer from slow convergence, mechanical errors and conjugate solution interference, which limit its further application and development. In this work, we proposed a lensless imaging method based on spatial light modulator (SLM) with unknown modulation curve. In our imaging system, we use SLM to modulate the wavefront of object, and introduce the ptychographic scanning algorithm that is able to recover the complex amplitude information even the SLM modulation curve is inaccurate or unknown. In addition, we also design a split-beam interference experiment to calibrate the modulation curve of SLM, and using the calibrated modulation function as the initial value of the expended ptychography iterative engine (ePIE) algorithm can improve the convergence speed. We further analyze the effect of modulation function, algorithm parameters and the characteristics of the coherent light source on the quality of reconstructed image. The simulated and real experiments show that the proposed method is superior to traditional mechanical scanning methods in terms of recovering speed and accuracy, with the recovering resolution up to 14 um. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Multiple Narrow-band signals Direction Finding with TMLA by Nonuniform Period Modulation

Authors: Kebin Liu, Lening Zhang, Qingkui Zhan, Chong He

Abstract: A new array signal reconstruction and signal-channel DOA estimation method based on TMLA by nonuniform period modulation are proposed. By using non-uniform period modulation, the harmonic component produced by different elements could be separated. Therefore, the conventional snapshot could be reconstructed by analyzing the spectrum of the combined signal. Then spatial spectrum estimation method i… ▽ More A new array signal reconstruction and signal-channel DOA estimation method based on TMLA by nonuniform period modulation are proposed. By using non-uniform period modulation, the harmonic component produced by different elements could be separated. Therefore, the conventional snapshot could be reconstructed by analyzing the spectrum of the combined signal. Then spatial spectrum estimation method is used to implement DOA estimation. Numerical simulations are provided to verify the feasibility and accuracy of the proposed method. Since the duration of the signal in the frequency domain analysis processed in a single time is very short, this method is also applicable to narrowband signals. Another highlight is that this method can simultaneously measure the number of the elements-1 angle of incident signals. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Joint Active and Passive Beamforming Design for IRS-Aided Radar-Communication

Authors: Meng Hua, Qingqing Wu, Chong He, Shaodan Ma, Wen Chen

Abstract: In this paper, we study an intelligent reflecting surface (IRS)-aided radar-communication (Radcom) system, where the IRS is leveraged to help Radcom base station (BS) transmit the joint of communication signals and radar signals for serving communication users and tracking targets simultaneously. The objective of this paper is to minimize the total transmit power at the Radcom BS by jointly optimi… ▽ More In this paper, we study an intelligent reflecting surface (IRS)-aided radar-communication (Radcom) system, where the IRS is leveraged to help Radcom base station (BS) transmit the joint of communication signals and radar signals for serving communication users and tracking targets simultaneously. The objective of this paper is to minimize the total transmit power at the Radcom BS by jointly optimizing the active beamformers, including communication beamformers and radar beamformers, at the Radcom BS and the phase shifts at the IRS, subject to the minimum signal-to-interference-plus-noise ratio (SINR) required by communication users, the minimum SINR required by the radar, and the cross-correlation pattern design. In particular, we consider two cases, namely, case I and case II, based on the presence or absence of the radar cross-correlation design and the interference introduced by the IRS on the Radcom BS. For case I where the cross correlation design and the interference are not considered, we prove that the dedicated radar signals are not needed, which significantly reduces implementation complexity and simplifies algorithm design. Then, a penalty-based algorithm is proposed to solve the resulting non-convex optimization problem. Whereas for case II considering the cross-correlation design and the interference, we unveil that the dedicated radar signals are needed in general to enhance the system performance. Since the resulting optimization problem is more challenging to solve as compared with the case I, the semidefinite relaxation (SDR) based alternating optimization (AO) algorithm is proposed. Simulation results demonstrate the effectiveness of proposed algorithms and also show the superiority of the proposed scheme over various benchmark schemes. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: This paper answers the fundamental question: whether the dedicated radar signals are needed under two considered scenarios. The manuscript has been submitted to IEEE journal for possible publication

Keep It Accurate and Robust: An Enhanced Nuclei Analysis Framework

Authors: Wenhua Zhang, Sen Yang, Meiwei Luo, Chuan He, Yuchen Li, Jun Zhang, Xiyue Wang, Fang Wang

Abstract: Accurate segmentation and classification of nuclei in histology images is critical but challenging due to nuclei heterogeneity, staining variations, and tissue complexity. Existing methods often struggle with limited dataset variability, with patches extracted from similar whole slide images (WSI), making models prone to falling into local optima. Here we propose a new framework to address this li… ▽ More Accurate segmentation and classification of nuclei in histology images is critical but challenging due to nuclei heterogeneity, staining variations, and tissue complexity. Existing methods often struggle with limited dataset variability, with patches extracted from similar whole slide images (WSI), making models prone to falling into local optima. Here we propose a new framework to address this limitation and enable robust nuclear analysis. Our method leverages dual-level ensemble modeling to overcome issues stemming from limited dataset variation. Intra-ensembling applies diverse transformations to individual samples, while inter-ensembling combines networks of different scales. We also introduce enhancements to the HoVer-Net architecture, including updated encoders, nested dense decoding and model regularization strategy. We achieve state-of-the-art results on public benchmarks, including 1st place for nuclear composition prediction and 3rd place for segmentation/classification in the 2022 Colon Nuclei Identification and Counting (CoNIC) Challenge. This success validates our approach for accurate histological nuclei analysis. Extensive experiments and ablation studies provide insights into optimal network design choices and training techniques. In conclusion, this work proposes an improved framework advancing the state-of-the-art in nuclei analysis. We release our code and models (https://github.com/WinnieLaugh/CONIC_Pathology_AI) to serve as a toolkit for the community. △ Less

Submitted 16 January, 2025; v1 submitted 4 March, 2022; originally announced March 2022.

Active IRS Aided Multiple Access for Energy-Constrained IoT Systems

Authors: Guangji Chen, Qingqing Wu, Chong He, Wen Chen, Jie Tang, Shi Jin

Abstract: We investigate the fundamental multiple access (MA) scheme in an active intelligent reflecting surface (IRS) aided energy-constrained Internet-of-Things (IoT) system, where an active IRS is deployed to assist the uplink transmission from multiple IoT devices to an access point (AP). Our goal is to maximize the sum throughput by optimizing the IRS beamforming vectors across time and resource alloca… ▽ More We investigate the fundamental multiple access (MA) scheme in an active intelligent reflecting surface (IRS) aided energy-constrained Internet-of-Things (IoT) system, where an active IRS is deployed to assist the uplink transmission from multiple IoT devices to an access point (AP). Our goal is to maximize the sum throughput by optimizing the IRS beamforming vectors across time and resource allocation. To this end, we first study two typical active IRS aided MA schemes, namely time division multiple access (TDMA) and non-orthogonal multiple access (NOMA), by analytically comparing their achievable sum throughput and proposing corresponding algorithms. Interestingly, we prove that given only one available IRS beamforming vector, the NOMA-based scheme generally achieves a larger throughput than the TDMA-based scheme, whereas the latter can potentially outperform the former if multiple IRS beamforming vectors are available to harness the favorable time selectivity of the IRS. To strike a flexible balance between the system performance and the associated signaling overhead incurred by more IRS beamforming vectors, we then propose a general hybrid TDMA-NOMA scheme with user grouping, where the devices in the same group transmit simultaneously via NOMA while devices in different groups occupy orthogonal time slots. By controlling the number of groups, the hybrid TDMA-NOMA scheme is applicable for any given number of IRS beamforming vectors available. Despite of the non-convexity of the considered optimization problem, we propose an efficient algorithm based on alternating optimization. Simulation results illustrate the practical superiorities of the active IRS over the passive IRS in terms of the coverage extension and supporting multiple energy-limited devices, and demonstrate the effectiveness of our proposed hybrid MA scheme for flexibly balancing the performance-cost tradeoff. △ Less

Submitted 29 January, 2022; originally announced January 2022.

Robust Joint Design for Intelligent Reflecting Surfaces Assisted Cell-Free Networks

Authors: Xie Xie, Chen He, Xiaoya Li, Zhu Han, Z. Jane Wang

Abstract: Intelligent reflecting surfaces (IRSs) have emerged as a promising economical solution to implement cell-free networks. However, the performance gains achieved by IRSs critically depend on smartly tuned passive beamforming based on the assumption that the accurate channel state information (CSI) knowledge is available, which is practically impossible. Thus, in this paper, we investigate the impact… ▽ More Intelligent reflecting surfaces (IRSs) have emerged as a promising economical solution to implement cell-free networks. However, the performance gains achieved by IRSs critically depend on smartly tuned passive beamforming based on the assumption that the accurate channel state information (CSI) knowledge is available, which is practically impossible. Thus, in this paper, we investigate the impact of the CSI uncertainty on IRS-assisted cell-free networks. We adopt a stochastic programming method to cope with the CSI uncertainty by maximizing the expectation of the sum-rate, which guarantees robust performance over the average. Accordingly, an average sum-rate maximization problem is formulated, which is non-convex and arduous to obtain its optimal solution due to the coupled variables and the expectation operation with respect to CSI uncertainties. As a compromising approach, we develop an efficient robust joint design algorithm with low-complexity. Particularly, the original problem is equivalently transformed into a tractable form, and then, the locally optimal solution can be obtained by employing the block coordinate descent method. We further prove that the CSI uncertainty impacts the design of the active transmitting beamforming of APs, but surprisingly does not directly impact the design of the passive reflecting beamforming of IRSs. It is worth noting that the investigated scenario is flexible and general, and thus the proposed algorithm can act as a general framework to solve various sum-rate maximization problems. Simulation results demonstrate that IRSs can achieve considerable data rate improvement for conventional cell-free networks, and confirm the resilience of the proposed algorithm against the CSI uncertainty. △ Less

Submitted 20 February, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Comments: 30 pages

A three-dimensional dual-domain deep network for high-pitch and sparse helical CT reconstruction

Authors: Wei Wang, Xiang-Gen Xia, Chuanjiang He, Zemin Ren, Jian Lu

Abstract: In this paper, we propose a new GPU implementation of the Katsevich algorithm for helical CT reconstruction. Our implementation divides the sinograms and reconstructs the CT images pitch by pitch. By utilizing the periodic properties of the parameters of the Katsevich algorithm, our method only needs to calculate these parameters once for all the pitches and so has lower GPU-memory burdens and is… ▽ More In this paper, we propose a new GPU implementation of the Katsevich algorithm for helical CT reconstruction. Our implementation divides the sinograms and reconstructs the CT images pitch by pitch. By utilizing the periodic properties of the parameters of the Katsevich algorithm, our method only needs to calculate these parameters once for all the pitches and so has lower GPU-memory burdens and is very suitable for deep learning. By embedding our implementation into the network, we propose an end-to-end deep network for the high pitch helical CT reconstruction with sparse detectors. Since our network utilizes the features extracted from both sinograms and CT images, it can simultaneously reduce the streak artifacts caused by the sparsity of sinograms and preserve fine details in the CT images. Experiments show that our network outperforms the related methods both in subjective and objective evaluations. △ Less

Submitted 6 January, 2022; originally announced January 2022.

Comments: 13 pages, 5 figures

Classifying Autism from Crowdsourced Semi-Structured Speech Recordings: A Machine Learning Approach

Authors: Nathan A. Chi, Peter Washington, Aaron Kline, Arman Husic, Cathy Hou, Chloe He, Kaitlyn Dunlap, Dennis Wall

Abstract: Autism spectrum disorder (ASD) is a neurodevelopmental disorder which results in altered behavior, social development, and communication patterns. In past years, autism prevalence has tripled, with 1 in 54 children now affected. Given that traditional diagnosis is a lengthy, labor-intensive process, significant attention has been given to developing systems that automatically screen for autism. Pr… ▽ More Autism spectrum disorder (ASD) is a neurodevelopmental disorder which results in altered behavior, social development, and communication patterns. In past years, autism prevalence has tripled, with 1 in 54 children now affected. Given that traditional diagnosis is a lengthy, labor-intensive process, significant attention has been given to developing systems that automatically screen for autism. Prosody abnormalities are among the clearest signs of autism, with affected children displaying speech idiosyncrasies including echolalia, monotonous intonation, atypical pitch, and irregular linguistic stress patterns. In this work, we present a suite of machine learning approaches to detect autism in self-recorded speech audio captured from autistic and neurotypical (NT) children in home environments. We consider three methods to detect autism in child speech: first, Random Forests trained on extracted audio features (including Mel-frequency cepstral coefficients); second, convolutional neural networks (CNNs) trained on spectrograms; and third, fine-tuned wav2vec 2.0--a state-of-the-art Transformer-based ASR model. We train our classifiers on our novel dataset of cellphone-recorded child speech audio curated from Stanford's Guess What? mobile game, an app designed to crowdsource videos of autistic and neurotypical children in a natural home environment. The Random Forest classifier achieves 70% accuracy, the fine-tuned wav2vec 2.0 model achieves 77% accuracy, and the CNN achieves 79% accuracy when classifying children's audio as either ASD or NT. Our models were able to predict autism status when training on a varied selection of home audio clips with inconsistent recording quality, which may be more generalizable to real world conditions. These results demonstrate that machine learning methods offer promise in detecting autism automatically from speech without specialized equipment. △ Less

Submitted 3 January, 2022; originally announced January 2022.

Comments: 17 pages, 4 figures, submitted to JMIR Pediatrics and Parenting