-
Distributed switched model-based predictive control for distributed large-scale systems with switched topology
Authors:
Morteza Alinia Ahandani,
Hamed Kharrati,
Farzad Hashemzadeh,
Mahdi Baradarannia
Abstract:
Distributed switched large-scale systems are composed by dynamically coupled subsystems, in which interactions among subsystems vary over time according to an exogenous input signal named switching signal. In this paper, we present a distributed robust switched model-based predictive control (DSwMPC) to control such systems that are subject to local state and input constraints. The proposed method…
▽ More
Distributed switched large-scale systems are composed by dynamically coupled subsystems, in which interactions among subsystems vary over time according to an exogenous input signal named switching signal. In this paper, we present a distributed robust switched model-based predictive control (DSwMPC) to control such systems that are subject to local state and input constraints. The proposed method guarantees stabilizing the origin of the whole closed-loop system and ensures the constraints satisfaction in the presence of an unknown switching signal. In the distributed model-based predictive control (DMPC) used in this work, by considering the interactions among subsystems as an additive disturbance, the effect of the switch is reflected on the dynamic equation, local, and consistency constraint sets of the nominal subsystems. In the DSwMPC, to compensate the effect of switching signal which creates a time-varying network topology, a robust tube-based switched model-based predictive control (RSwMPC) with switched robust control invariant (switchRCI) set as the target set robust to unknown mode switching is used as local controller. The scheme performance is assessed using three typical examples. In the first example, the switching times are unknown in prior, but the next neighborhood sets are assumed to be known in prior. In the second and third cases, both of them are supposed to be unknown in prior. The simulation results show that the input and state constraints are satisfied by the proposed DSwMPC at all times. They also validate that the closed-loop system converges to the origin. Also, a comparison of the DSwMPC with a centralized SwMPC (CSwMPC) and a decentralized SwMPC (DeSwMPC) shows that the DSwMPC outperforms the DecSwMPC and also the shapes of response curves under the CSwMPC are very similar to those obtained by the DSwMPC.
△ Less
Submitted 19 December, 2021;
originally announced December 2021.
-
Passivity Analysis of Discrete-time Counterparts of the Bilateral Controlled Teleoperation Systems
Authors:
A. A. Ghavifekr,
M. A. Badamchizadeh,
A. R. Ghiasi,
F. Hashemzadeh
Abstract:
This paper presents an analysis of the passivity condition for discrete-time bilateral teleoperation systems. Considering discrete-time controllers for a master-slave teleoperation system can simplify its implementation. Varieties of control schemes have been utilized for the position error based architecture of bilateral teleoperation systems and major concerns such as passivity and transparency…
▽ More
This paper presents an analysis of the passivity condition for discrete-time bilateral teleoperation systems. Considering discrete-time controllers for a master-slave teleoperation system can simplify its implementation. Varieties of control schemes have been utilized for the position error based architecture of bilateral teleoperation systems and major concerns such as passivity and transparency have been studied. This paper takes into account the passivity conditions for the discrete counterparts of P-like, PD-like, and PD-like + dissipation controllers. These conditions impose bounds on the controller gains, the damping of the master and slave robots, and the sampling time which help researchers to provide guidelines to have better transparency and passive teleoperation systems. Simulation results are performed to show the effectiveness of the proposed criteria.
△ Less
Submitted 15 August, 2020;
originally announced August 2020.
-
Stability analysis of the linear discrete teleoperation systems with stochastic sampling and data dropout
Authors:
Amir A Ghavifekr,
Amir R Ghiasi,
Mohammad A Badamchizadeh,
Farzad Hashemzadeh,
Paolo Fiorini
Abstract:
This paper addresses the stability conditions of the sampled-data teleoperation systems consisting continuous time master, slave, operator, and environment with discrete time controllers over general communication networks. The output signals of the slave and master robots are quantized with stochastic sampling periods which are modeled as being from a finite set. By applying an input delay method…
▽ More
This paper addresses the stability conditions of the sampled-data teleoperation systems consisting continuous time master, slave, operator, and environment with discrete time controllers over general communication networks. The output signals of the slave and master robots are quantized with stochastic sampling periods which are modeled as being from a finite set. By applying an input delay method, the probabilistic sampling system is converted into a continuous-time system including stochastic parameters in the system matrices. The main contribution of this paper is the derivation of the less conservative stability conditions for linear discrete teleoperation systems taking into account the challenges such as the stochastic sampling rate, constant time delay and the possibility of data packet dropout. The numbers of dropouts are driven by a finite state Markov chain. First, the problem of finding a lower bound on the maximum sampling period that preserves the stability is formulated. This problem is constructed as a convex optimization program in terms of linear matrix inequalities (LMI). Next, Lyapunov Krasovskii based approaches are applied to propose sufficient conditions for stochastic and exponential stability of closed-loop sampled-data bilateral teleoperation system. The proposed criterion notifies the effect of sampling time on the stability transparency trade-off and imposes bounds on the sampling time, control gains and the damping of robots. Neglecting this study undermines both the stability and transparency of teleoperation systems. Numerical simulation results are used to verify the proposed stability criteria and illustrate the effectiveness of the sampling architecture.
△ Less
Submitted 15 August, 2020;
originally announced August 2020.
-
Prescribed Performance Distance-Based Formation Control of Multi-Agent Systems (Extended Version)
Authors:
Farhad Mehdifar,
Charalampos P. Bechlioulis,
Farzad Hashemzadeh,
Mahdi Baradarannia
Abstract:
This paper presents a novel control protocol for robust distance-based formation control with prescribed performance in which agents are subjected to unknown external disturbances. Connectivity maintenance and collision avoidance among neighboring agents are also handled by the appropriate design of certain performance bounds that constrain the inter-agent distance errors. As an extension to the p…
▽ More
This paper presents a novel control protocol for robust distance-based formation control with prescribed performance in which agents are subjected to unknown external disturbances. Connectivity maintenance and collision avoidance among neighboring agents are also handled by the appropriate design of certain performance bounds that constrain the inter-agent distance errors. As an extension to the proposed scheme, distance-based formation centroid maneuvering is also studied for disturbance-free agents, in which the formation centroid tracks a desired time-varying velocity. The proposed control laws are decentralized, in the sense that each agent employs local relative information regarding its neighbors to calculate its control signal. Therefore, the control scheme is implementable on the agents' local coordinate frames. Using rigid graph theory, input-to-state stability, and Lyapunov based analysis, the results are established for minimally and infinitesimally rigid formations in 2-D or 3-D space. Furthermore, it is argued that the proposed approach increases formation robustness against shape distortions and can prevent formation convergence to incorrect shapes, which is likely to happen in conventional distance-based formation control methods. Finally, extensive simulation studies clarify and verify the proposed approach.
△ Less
Submitted 22 January, 2020; v1 submitted 17 November, 2019;
originally announced November 2019.
