Showing 1–11 of 11 results for author: Green, T C

Levelised Cost of Demand Response: Estimating the Cost-Competitiveness of Flexible Demand

Authors: Jacob Thrän, Tim C. Green, Robert Shorten

Abstract: To make well-informed investment decisions, energy system stakeholders require reliable cost frameworks for demand response (DR) and storage technologies. While the levelised cost of storage (LCOS) permits comprehensive cost comparisons between different storage technologies, no generic cost measure for the comparison of different DR schemes exists. This paper introduces the levelised cost of dema… ▽ More To make well-informed investment decisions, energy system stakeholders require reliable cost frameworks for demand response (DR) and storage technologies. While the levelised cost of storage (LCOS) permits comprehensive cost comparisons between different storage technologies, no generic cost measure for the comparison of different DR schemes exists. This paper introduces the levelised cost of demand response (LCODR) which is an analogous measure to the LCOS but crucially differs from it by considering consumer reward payments. Additionally, the value factor from cost estimations of variable renewable energy is adapted to account for the variable availability of DR. The LCODRs for four direct load control (DLC) schemes and twelve storage applications are estimated and contrasted against LCOS literature values for the most competitive storage technologies. The DLC schemes are vehicle-to-grid, smart charging, smart heat pumps, and heat pumps with thermal storage. The results show that only heat pumps with thermal storage consistently outcompete storage technologies with EV-based DR schemes being competitive for some applications. The results and the underlying methodology offer a tool for energy system stakeholders to assess the competitiveness of DR schemes even with limited user data. △ Less

Submitted 5 February, 2025; originally announced February 2025.

On the Interaction in Transient Stability of Two-Inverter Power Systems containing GFL inverter Using Manifold Method

Authors: Yifan Zhang, Yunjie Gu, Yue Zhu, Timothy C. Green, Hsiao-Dong Chiang

Abstract: Many renewable energy resources are integrated into power systems via grid-following (GFL) inverters which rely on a phase-locked loop (PLL) for grid synchronization. During severe grid faults, GFL inverters are vulnerable to transient instability, often leading to disconnection from the grid. This paper aims to elucidate the interaction mechanisms and define the stability boundaries of systems of… ▽ More Many renewable energy resources are integrated into power systems via grid-following (GFL) inverters which rely on a phase-locked loop (PLL) for grid synchronization. During severe grid faults, GFL inverters are vulnerable to transient instability, often leading to disconnection from the grid. This paper aims to elucidate the interaction mechanisms and define the stability boundaries of systems of two inverters, including GFL, grid-forming (GFM), or grid-supporting (GSP) inverters. First, the generalized large-signal expression for the two-inverter system under various inverter combinations is derived, revealing that no energy function exists for systems containing GFL inverters. This implies that the traditional direct method cannot be applied to such systems. To overcome these challenges, a manifold method is employed to precisely determine the domain of attraction (DOA) of the system, and the transient stability margin is assessed by a new metric termed the critical clearing radius (CCR). A case study of the two-inverter system under various inverter combinations is conducted to explore large-signal interactions across different scenarios. Manifold analysis and simulation results reveal that GSP inverters using PLL for grid synchronization exhibit behavior similar to GFM inverters when the droop coefficients in the terminal voltage control loop (TVC) are sufficiently large. Compared to GFL inverters, GSP inverters incorporating a TVC significantly enhances the transient stability of other inverters. In the STATCOM case, the optimal placement of the STATCOM, realized by GSP or GFM inverters, is identified to be at the midpoint of a transmission line. All findings in this paper are validated through electromagnetic transient (EMT) simulations △ Less

Submitted 10 January, 2025; originally announced January 2025.

Reserve Provision from Electric Vehicles: Aggregate Boundaries and Stochastic Model Predictive Control

Authors: Jacob Thrän, Jakub Mareček, Robert N. Shorten, Timothy C. Green

Abstract: Controlled charging of electric vehicles, EVs, is a major potential source of flexibility to facilitate the integration of variable renewable energy and reduce the need for stationary energy storage. To offer system services from EVs, fleet aggregators must address the uncertainty of individual driving and charging behaviour. This paper introduces a means of forecasting the service volume availabl… ▽ More Controlled charging of electric vehicles, EVs, is a major potential source of flexibility to facilitate the integration of variable renewable energy and reduce the need for stationary energy storage. To offer system services from EVs, fleet aggregators must address the uncertainty of individual driving and charging behaviour. This paper introduces a means of forecasting the service volume available from EVs by considering several EV batteries as one conceptual battery with aggregate power and energy boundaries. Aggregation avoids the difficult prediction of individual driving behaviour. The predictability of the boundaries is demonstrated using a multiple linear regression model which achieves a normalised root mean square error of 20% - 40% for a fleet of 1,000 EVs. A two-stage stochastic model predictive control algorithm is used to schedule reserve services on a day-ahead basis addressing risk trade-offs by including Conditional Value-at-Risk in the objective function. A case study with 1.2 million domestic EV charge records from Great Britain illustrates that increasing fleet size improves prediction accuracy, thereby increasing reserve revenues and decreasing an aggregator's operational costs. For fleet sizes of 400 or above, cost reductions plateau at 60% compared to uncontrolled charging, with an average of 1.8kW of reserve provided per vehicle. △ Less

Submitted 17 February, 2025; v1 submitted 11 June, 2024; originally announced June 2024.

Journal ref: IEEE Transactions on Power Systems 2025

Descriptor State Space Modeling of Power Systems

Authors: Yitong Li, Timothy C. Green, Yunjie Gu

Abstract: State space is widely used for modeling power systems and analyzing their dynamics but it is limited to representing causal and proper systems in which the number of zeros does not exceed the number of poles. In other words, the system input, output, and state can not be freely selected. This limits how flexibly models are constructed, and in some circumstances, can introduce errors because of the… ▽ More State space is widely used for modeling power systems and analyzing their dynamics but it is limited to representing causal and proper systems in which the number of zeros does not exceed the number of poles. In other words, the system input, output, and state can not be freely selected. This limits how flexibly models are constructed, and in some circumstances, can introduce errors because of the addition of virtual elements in order to connect the mismatched ports of subsystem models. An extension known as descriptor state space can model both proper and improper systems and is a promising candidate for solving the noted problems. It facilitates a modular construction of power system models with flexible choice of ports of subsystems. Algorithms for mathematical manipulation of descriptor state space models are derived such as preforming inverse, connection, and transform. Corresponding physical interpretations are also given. Importantly, the proposed algorithms preserve the subsystem states in the whole system model, which therefore enables the analysis of root causes of instability and mode participation. Theoretical advances are validated by example power systems of varied scales including a single-inductor or -capacitor system, two-inductor or -capacitor system, and a modified IEEE 14-bus generator-inverter-composite system. △ Less

Submitted 2 March, 2023; originally announced March 2023.

Impedance-based Root-cause Analysis: Comparative Study of Impedance Models and Calculation of Eigenvalue Sensitivity

Authors: Yue Zhu, Yunjie Gu, Yitong Li, Timothy C. Green

Abstract: Impedance models of power systems are useful when state-space models of apparatus such as inverter-based resources (IBRs) have not been made available and instead only black-box impedance models are available. For tracing the root causes of poor damping and tuning modes of the system, the sensitivity of the modes to components and parameters are needed. The so-called critical admittance-eigenvalue… ▽ More Impedance models of power systems are useful when state-space models of apparatus such as inverter-based resources (IBRs) have not been made available and instead only black-box impedance models are available. For tracing the root causes of poor damping and tuning modes of the system, the sensitivity of the modes to components and parameters are needed. The so-called critical admittance-eigenvalue sensitivity based on nodal admittance model has provided a partial solution but omits meaningful directional information. The alternative whole-system impedance model yields participation factors of shunt-connected apparatus with directional information that allows separate tuning for damping and frequency, yet do not cover series-connected components. This paper formalises the relationships between the two forms of impedance models and between the two forms of root-cause analysis. The calculation of system eigenvalue sensitivity in impedance models is further developed, which fills the gaps of previous research and establishes a complete theory of impedance-based root-cause analysis. The theoretical relationships and the tuning of parameters have been illustrated with a three-node passive network, a modified IEEE 14-bus network and a modified NETS-NYPS 68-bus network, showing that tools can be developed for tuning of IBR-rich power systems where only black-box impedance models are available. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Revisiting Grid-Forming and Grid-Following Inverters: A Duality Theory

Authors: Yitong Li, Yunjie Gu, Timothy C. Green

Abstract: Power electronic converters for integrating renewable energy resources into power systems can be divided into grid-forming and grid-following inverters. They possess certain similarities, but several important differences, which means that the relationship between them is quite subtle and sometimes obscure. In this article, a new perspective based on duality is proposed to create new insights. It… ▽ More Power electronic converters for integrating renewable energy resources into power systems can be divided into grid-forming and grid-following inverters. They possess certain similarities, but several important differences, which means that the relationship between them is quite subtle and sometimes obscure. In this article, a new perspective based on duality is proposed to create new insights. It successfully unifies the grid interfacing and synchronization characteristics of the two inverter types in a symmetric, elegant, and technology-neutral form. Analysis shows that the grid-forming and grid-following inverters are duals of each other in several ways including a) synchronization controllers: frequency droop control and phase-locked loop (PLL); b) grid-interfacing characteristics: current-following voltage-forming and voltage-following current-forming; c) swing characteristics: current-angle swing and voltage-angle swing; d) inner-loop controllers: output impedance shaping and output admittance shaping; and e) grid strength compatibility: strong-grid instability and weak-grid instability. The swing equations are also derived in dual form, which reveal the dynamic interaction between the grid strength, the synchronization controllers, and the inner-loop controllers. Insights are generated into cases of poor stability in both small-signal and transient/large-signal. The theoretical analysis and simulation results are used to illustrate cases for simple single-inverter-infinite-bus systems and a multi-inverter power network. △ Less

Submitted 27 January, 2022; v1 submitted 27 May, 2021; originally announced May 2021.

Mapping of Dynamics between Mechanical and Electrical Ports in SG-IBR Composite Grids

Authors: Yitong Li, Yunjie Gu, Timothy C. Green

Abstract: Power grids are traditionally dominated by synchronous generators (SGs) but are currently undergoing a major transformation through the increasing integration of inverter-based resources (IBRs). The SG-dominated grid is traditionally analyzed in a mechanical-centric view which ignores fast electrical dynamics and focuses on the torque-speed dynamics. By contrast, analysis of the emergent IBR-domin… ▽ More Power grids are traditionally dominated by synchronous generators (SGs) but are currently undergoing a major transformation through the increasing integration of inverter-based resources (IBRs). The SG-dominated grid is traditionally analyzed in a mechanical-centric view which ignores fast electrical dynamics and focuses on the torque-speed dynamics. By contrast, analysis of the emergent IBR-dominated grid usually takes the electrical-centric view which focuses on the voltage-current interaction. In this article, a port-mapping method is proposed to fill the gap between these approaches and combine them in a unified model. Specifically, the mechanical dynamics are mapped to the electrical impedance seen at the electrical port; and the electrical dynamics are also mapped to the torque coefficient seen at the mechanical port. The bidirectional mapping gives additional flexibility and insights to analyze the sub-system interactions in whole-system dynamics and guide the tuning of parameter. Application of the proposed method is illustrated in three cases with increasing scales, namely a single-SG-infinite-bus system, a single-IBR-weak-grid system, and a modified IEEE 14-bus SG-IBR composite system. △ Less

Submitted 13 May, 2021; originally announced May 2021.

The Intrinsic Communication in Power Systems: A New Perspective to Understand Synchronization Stability

Authors: Yitong Li, Timothy C. Green, Yunjie Gu

Abstract: Synchronization is an essential element in three-phase ac electric power systems. The large-scale integration of converter-interfaced resources leads to the power grid transformation from voltage-source-dominated to voltage-current-source-composite, which also raises new challenges to model and analyze the system synchronization. In this article, we present the intrinsic analogy of a power system… ▽ More Synchronization is an essential element in three-phase ac electric power systems. The large-scale integration of converter-interfaced resources leads to the power grid transformation from voltage-source-dominated to voltage-current-source-composite, which also raises new challenges to model and analyze the system synchronization. In this article, we present the intrinsic analogy of a power system to a communication system, which is here called power-communication isomorphism. Based on this isomorphism, we revisit power system synchronization stability from a communication perspective and thereby establish a theory that unifies the synchronization dynamics of heterogeneous power apparatuses. In particular, the proposed theory is used to interpret and analyze, for example, the different power control speeds of power apparatuses; the role of network line dynamics in synchronization analysis; and the synchronization capability of current-source-dominated (e.g., grid-following-converter-dominated) grids. The findings are verified on the IEEE 68-bus test system. △ Less

Submitted 2 March, 2023; v1 submitted 30 March, 2021; originally announced March 2021.

Participation Analysis in Impedance Models: The Grey-Box Approach for Power System Stability

Authors: Yue Zhu, Yunjie Gu, Yitong Li, Timothy C. Green

Abstract: This paper develops a grey-box approach to small-signal stability analysis of complex power systems that facilitates root-cause tracing without requiring disclosure of the full details of the internal control structure of apparatus connected to the system. The grey-box enables participation analysis in impedance models, which is popular in power electronics and increasingly accepted in power syste… ▽ More This paper develops a grey-box approach to small-signal stability analysis of complex power systems that facilitates root-cause tracing without requiring disclosure of the full details of the internal control structure of apparatus connected to the system. The grey-box enables participation analysis in impedance models, which is popular in power electronics and increasingly accepted in power systems for stability analysis. The Impedance participation factor is proposed and defined in terms of the residue of the whole-system admittance matrix. It is proved that, the so defined impedance participation factor equals the sensitivity of the whole-system eigenvalue with respect to apparatus impedance. The classic state participation factor is related to the impedance participation factor via a chain-rule. Based on the chain-rule, a three-layer grey-box approach, with three degrees of transparency, is proposed for root-cause tracing to different depths, i.e. apparatus, states, and parameters, according to the available information. The association of impedance participation factor with eigenvalue sensitivity points to the re-tuning that would stabilize the system. The impedance participation factor can be measured in the field or calculated from the black-box impedance spectra with little prior knowledge required. △ Less

Submitted 13 May, 2021; v1 submitted 8 February, 2021; originally announced February 2021.

Resilient Secondary Voltage Control of Islanded Microgrids: An ESKBF-Based Distributed Fast Terminal Sliding Mode Control Approach

Authors: Pudong Ge, Yue Zhu, Tim C. Green, Fei Teng

Abstract: This paper proposes a distributed secondary voltage control method based on extended state Kalman-Bucy filter (ESKBF) and fast terminal sliding mode (FTSM) control for the resilient operation of an islanded microgrid (MG) with inverter-based distributed generations (DGs). To tackle the co-existence of multiple uncertainties, a unified modelling framework is proposed to represent the set of differe… ▽ More This paper proposes a distributed secondary voltage control method based on extended state Kalman-Bucy filter (ESKBF) and fast terminal sliding mode (FTSM) control for the resilient operation of an islanded microgrid (MG) with inverter-based distributed generations (DGs). To tackle the co-existence of multiple uncertainties, a unified modelling framework is proposed to represent the set of different types of disturbances, including parameter perturbation, measurement noise, and immeasurably external variables, by an extended state method. Kalman-Bucy filter is then applied to accurately estimate the state information of the extended DG model. In addition, based on the accurate estimation, a fast terminal sliding mode (FTSM) surface with terminal attractors is designed to maintain the system stability and accelerate the convergence of consensus tracking, which significantly improves the performance of secondary voltage control under both normal and plug-and-play operation. Finally, case studies are conducted in both MATLAB/Simulink and an experimental testbed to demonstrate the effectiveness of the proposed method. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Comments: accepted by IEEE Transactions on Power Systems

Interpreting Frame Transformations as Diagonalization of Harmonic Transfer Functions

Authors: Yunjie Gu, Yitong Li, Timothy C. Green

Abstract: Analysis of ac electrical systems can be performed via frame transformations in the time-domain or via harmonic transfer functions (HTFs) in the frequency-domain. The two approaches each have unique advantages but are hard to reconcile because the coupling effect in the frequency-domain leads to infinite dimensional HTF matrices that need to be truncated. This paper explores the relation between t… ▽ More Analysis of ac electrical systems can be performed via frame transformations in the time-domain or via harmonic transfer functions (HTFs) in the frequency-domain. The two approaches each have unique advantages but are hard to reconcile because the coupling effect in the frequency-domain leads to infinite dimensional HTF matrices that need to be truncated. This paper explores the relation between the two representations and shows that applying a similarity transformation to an HTF matrix creates a direct equivalence to a frame transformation on the input-output signals. Under certain conditions, such similarity transformations have a diagonalizing effect which, essentially, reduces the HTF matrix order from infinity to two or one, making the matrix tractable mathematically without truncation or approximation. This theory is applied to a droop-controlled voltage source inverter as an illustrative example. A stability criterion is derived in the frequency-domain which agrees with the conventional state-space model but offers greater insights into the mechanism of instability in terms of the negative damping (non-passivity) under droop control. The paper not only establishes a unified view in theory but also offers an effective practical tool for stability assessment. △ Less

Submitted 3 June, 2019; v1 submitted 23 October, 2018; originally announced October 2018.

Journal ref: IEEE Transactions on Circuits and Systems I: Regular Papers, 2020