Showing 1–5 of 5 results for author: Garcia, J M

Expanding the deep-learning model to diagnosis LVNC: Limitations and trade-offs

Authors: Gregorio Bernabé, Pilar González-Férez, José M. García, Guillem Casas, Josefa González-Carrillo

Abstract: Hyper-trabeculation or non-compaction in the left ventricle of the myocardium (LVNC) is a recently classified form of cardiomyopathy. Several methods have been proposed to quantify the trabeculae accurately in the left ventricle, but there is no general agreement in the medical community to use a particular approach. In previous work, we proposed DL-LVTQ, a deep learning approach for left ventricu… ▽ More Hyper-trabeculation or non-compaction in the left ventricle of the myocardium (LVNC) is a recently classified form of cardiomyopathy. Several methods have been proposed to quantify the trabeculae accurately in the left ventricle, but there is no general agreement in the medical community to use a particular approach. In previous work, we proposed DL-LVTQ, a deep learning approach for left ventricular trabecular quantification based on a U-Net CNN architecture. DL-LVTQ was an automatic diagnosis tool developed from a dataset of patients with the same cardiomyopathy (hypertrophic cardiomyopathy). In this work, we have extended and adapted DL-LVTQ to cope with patients with different cardiomyopathies. The dataset consists of up 379 patients in three groups with different particularities and cardiomyopathies. Patient images were taken from different scanners and hospitals. We have modified and adapted the U-Net convolutional neural network to account for the different particularities of a heterogeneous group of patients with various unclassifiable or mixed and inherited cardiomyopathies. The inclusion of new groups of patients has increased the accuracy, specificity and kappa values while maintaining the sensitivity of the automatic deep learning method proposed. Therefore, a better-prepared diagnosis tool is ready for various cardiomyopathies with different characteristics. Cardiologists have considered that 98.9% of the evaluated outputs are verified clinically for diagnosis. Therefore, the high precision to segment the different cardiac structures allows us to make a robust diagnostic system objective and faster, decreasing human error and time spent. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Journal ref: Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization. 2024

Automatic Anomalies Detection in Hydraulic Devices

Authors: Jose A. Solorio, Jose M. Garcia, Sudip Vhaduri

Abstract: Nowadays, the applications of hydraulic systems are present in a wide variety of devices in both industrial and everyday environments. The implementation and usage of hydraulic systems have been well documented; however, today, this still faces a challenge, the integration of tools that allow more accurate information about the functioning and operation of these systems for proactive decision-maki… ▽ More Nowadays, the applications of hydraulic systems are present in a wide variety of devices in both industrial and everyday environments. The implementation and usage of hydraulic systems have been well documented; however, today, this still faces a challenge, the integration of tools that allow more accurate information about the functioning and operation of these systems for proactive decision-making. In industrial applications, many sensors and methods exist to measure and determine the status of process variables (e.g., flow, pressure, force). Nevertheless, little has been done to have systems that can provide users with device-health information related to hydraulic devices integrated into the machinery. Implementing artificial intelligence (AI) technologies and machine learning (ML) models in hydraulic system components has been identified as a solution to the challenge many industries currently face: optimizing processes and carrying them out more safely and efficiently. This paper presents a solution for the characterization and estimation of anomalies in one of the most versatile and used devices in hydraulic systems, cylinders. AI and ML models were implemented to determine the current operating status of these hydraulic components and whether they are working correctly or if a failure mode or abnormal condition is present. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: This article has been removed by arXiv administrators because the submitter did not have the authority to grant a license at the time of submission

Direct-drive ocean wave-powered batch reverse osmosis

Authors: Katie M. Brodersen, Emily A. Bywater, Alec M. Lanter, Hayden H. Schennum, Kumansh N. Furia, Maulee K. Sheth, Nathaniel S. Kiefer, Brittany K. Cafferty, Akshay K. Rao, Jose M. Garcia, David M. Warsinger

Abstract: Ocean waves provide a consistent, reliable source of clean energy making them a viable energy source for desalination. Ocean wave energy is useful to coastal communities, especially island nations. However, large capital costs render current wave-powered desalination technologies economically infeasible. This work presents a high efficiency configuration for ocean wave energy powering batch revers… ▽ More Ocean waves provide a consistent, reliable source of clean energy making them a viable energy source for desalination. Ocean wave energy is useful to coastal communities, especially island nations. However, large capital costs render current wave-powered desalination technologies economically infeasible. This work presents a high efficiency configuration for ocean wave energy powering batch reverse osmosis. The proposed system uses seawater as the working fluid in a hydro-mechanical wave energy converter and replaces the reverse osmosis high-pressure pump with a hydraulic converter for direct-drive coupling. This allows for minimal intermediary power conversions, fewer components, and higher efficiencies. The concept was analyzed with MATLAB to model the transient energy dynamics of the wave energy converter, power take-off system, and desalination load. The fully hydro-mechanical coupling, incorporating energy recovery, could achieve an SEC and LCOW as low as 2.30 kWh/m3 and $1.96, respectively, for different sea states. The results were validated at the sub-system level against existing literature on wave energy models and previous work completed on batch reverse osmosis models, as this system was the first to combine these two technologies. SEC and LCOW values were validated by comparing to known and predicted values for various types of RO systems. △ Less

Submitted 15 July, 2021; originally announced July 2021.

Comments: 23 pages, 10 figures

Deep learning approach to left ventricular non-compaction measurement

Authors: Jesús M. Rodríguez-de-Vera, Josefa González-Carrillo, José M. García, Gregorio Bernabé

Abstract: Left ventricular non-compaction (LVNC) is a rare cardiomyopathy characterized by abnormal trabeculations in the left ventricle cavity. Although traditional computer vision approaches exist for LVNC diagnosis, deep learning-based tools could not be found in the literature. In this paper, a first approach using convolutional neural networks (CNNs) is presented. Four CNNs are trained to automatically… ▽ More Left ventricular non-compaction (LVNC) is a rare cardiomyopathy characterized by abnormal trabeculations in the left ventricle cavity. Although traditional computer vision approaches exist for LVNC diagnosis, deep learning-based tools could not be found in the literature. In this paper, a first approach using convolutional neural networks (CNNs) is presented. Four CNNs are trained to automatically segment the compacted and trabecular areas of the left ventricle for a population of patients diagnosed with Hypertrophic cardiomyopathy. Inference results confirm that deep learning-based approaches can achieve excellent results in the diagnosis and measurement of LVNC. The two best CNNs (U-Net and Efficient U-Net B1) perform image segmentation in less than 0.2 s on a CPU and in less than 0.01 s on a GPU. Additionally, a subjective evaluation of the output images with the identified zones is performed by expert cardiologists, with a perfect visual agreement for all the slices, outperforming already existing automatic tools. △ Less

Submitted 30 November, 2020; originally announced November 2020.

Noise Reduction to Compute Tissue Mineral Density and Trabecular Bone Volume Fraction from Low Resolution QCT

Authors: Felix Thomsen, José M. Fuertes García, Manuel Lucena, Juan Pisula, Rodrigo de Luis García, Jan Broggrefe, Claudio Delrieux

Abstract: We propose a 3D neural network with specific loss functions for quantitative computed tomography (QCT) noise reduction to compute micro-structural parameters such as tissue mineral density (TMD) and bone volume ratio (BV/TV) with significantly higher accuracy than using no or standard noise reduction filters. The vertebra-phantom study contained high resolution peripheral and clinical CT scans wit… ▽ More We propose a 3D neural network with specific loss functions for quantitative computed tomography (QCT) noise reduction to compute micro-structural parameters such as tissue mineral density (TMD) and bone volume ratio (BV/TV) with significantly higher accuracy than using no or standard noise reduction filters. The vertebra-phantom study contained high resolution peripheral and clinical CT scans with simulated in vivo CT noise and nine repetitions of three different tube currents (100, 250 and 360 mAs). Five-fold cross validation was performed on 20466 purely spongy pairs of noisy and ground-truth patches. Comparison of training and test errors revealed high robustness against over-fitting. While not showing effects for the assessment of BMD and voxel-wise densities, the filter improved thoroughly the computation of TMD and BV/TV with respect to the unfiltered data. Root-mean-square and accuracy errors of low resolution TMD and BV/TV decreased to less than 17% of the initial values. Furthermore filtered low resolution scans revealed still more TMD- and BV/TV-relevant information than high resolution CT scans, either unfiltered or filtered with two state-of-the-art standard denoising methods. The proposed architecture is threshold and rotational invariant, applicable on a wide range of image resolutions at once, and likely serves for an accurate computation of further micro-structural parameters. Furthermore, it is less prone for over-fitting than neural networks that compute structural parameters directly. In conclusion, the method is potentially important for the diagnosis of osteoporosis and other bone diseases since it allows to assess relevant 3D micro-structural information from standard low exposure CT protocols such as 100 mAs and 120 kVp. △ Less

Submitted 4 November, 2020; originally announced November 2020.

Comments: A revised version of this manuscript was accepted for publication in Computerized Medical Imaging and Graphics