Showing 1–4 of 4 results for author: Garanger, K

Soft Tensegrity Systems for Planetary Landing and Exploration

Authors: Kévin Garanger, Isaac del Valle, Miriam Rath, Matthew Krajewski, Utkarsh Raheja, Marco Pavone, Julian J. Rimoli

Abstract: During the last decade, tensegrity systems have been the focus of numerous investigations exploring the possibility of adopting them for planetary landing and exploration applications. Early approaches mainly focused on locomotion aspects related to tensegrity systems, where mobility was achieved by actuating the cable members of the system. Later efforts focused on understanding energy storage me… ▽ More During the last decade, tensegrity systems have been the focus of numerous investigations exploring the possibility of adopting them for planetary landing and exploration applications. Early approaches mainly focused on locomotion aspects related to tensegrity systems, where mobility was achieved by actuating the cable members of the system. Later efforts focused on understanding energy storage mechanisms of tensegrity systems undergoing landing events. More precisely, it was shown that under highly dynamic events, buckling of individual members of a tensegrity structure does not necessarily imply structural failure, suggesting that efficient structural design of planetary landers could be achieved by allowing its compression members to buckle. In this work, we combine both aspects of previous research on tensegrity structures, showing a possible lattice-like structural configuration able to withstand impact events, store pre-impact kinetic energy, and utilize a part of that energy for the locomotion process. Our work shows the feasibility of this proposed approach via both experimental and computational means. △ Less

Submitted 28 May, 2020; v1 submitted 24 March, 2020; originally announced March 2020.

Comments: Accepted at ASCE 2020 Earth and Space Conference

Modeling and Experimental Validation of a Fractal Tetrahedron UAS Assembly

Authors: Kévin Garanger, Jeremy Epps, Eric Feron

Abstract: This paper presents the foundation of a modular robotic system comprised of several novel modules in the shape of a tetrahedron. Four single-propeller submodules are assembled to create the Tetracopter, a tetrahedron-shaped quad-rotorcraft used as the elementary module of a modular flying system. This modular flying system is built by assembling the different elementary modules in a fractal shape.… ▽ More This paper presents the foundation of a modular robotic system comprised of several novel modules in the shape of a tetrahedron. Four single-propeller submodules are assembled to create the Tetracopter, a tetrahedron-shaped quad-rotorcraft used as the elementary module of a modular flying system. This modular flying system is built by assembling the different elementary modules in a fractal shape. The fractal tetrahedron structure of the modular flying assembly grants the vehicle more rigidity than a conventional two-dimensional modular robotic flight system while maintaining the relative efficiency of a two-dimensional modular robotic flight system. A prototype of the Tetracopter has been modeled, fabricated, and successfully flight-tested by the Decision and Control Laboratory at the Georgia Institute of Technology. The results of this research set the foundation for the development of Tetrahedron rotorcraft that can maintain controllable flight and assemble in flight to create a Fractal Tetrahedron Assembly. △ Less

Submitted 15 March, 2020; originally announced March 2020.

Comments: Presented as a conference paper at the 2020 IEEE Aerospace Conference

Additive manufacturing for high precision structural properties via feedback control

Authors: Kévin Garanger, Thanakorn Khamvilai, Eric Feron

Abstract: This paper discusses the possibility of making an object that precisely meets global structural requirements using additive manufacturing and feedback control. An experimental validation is presented by printing a cantilever beam with a prescribed stiffness requirement. The printing process is formalized as a model-based finite-horizon discrete control problem, where the control variables are the… ▽ More This paper discusses the possibility of making an object that precisely meets global structural requirements using additive manufacturing and feedback control. An experimental validation is presented by printing a cantilever beam with a prescribed stiffness requirement. The printing process is formalized as a model-based finite-horizon discrete control problem, where the control variables are the widths of the successive layers. Sensing is performed by making {\em in situ} intermediate stiffness measurements on the partially built part. The hypothesis that feedback control is effective in enabling the 3D-printed beam to meet precise stiffness requirements is validated experimentally. △ Less

Submitted 25 May, 2020; v1 submitted 24 May, 2019; originally announced May 2019.

Comments: Accepted for publication as a brief paper in IEEE Transactions on Control Systems Technology

3D printing of a leaf spring: A demonstration of closed-loop control in additive manufacturing

Authors: Kevin Garanger, Thanakorn Khamvilai, Eric Feron

Abstract: This paper presents the integration of a feedback control loop during the printing of a plastic object using additive manufacturing. The printed object is a leaf spring made of several parts of different infill density values, which are the control variables in this problem. In order to achieve a desired objective stiffness, measurements are taken after each part is completed and the infill densit… ▽ More This paper presents the integration of a feedback control loop during the printing of a plastic object using additive manufacturing. The printed object is a leaf spring made of several parts of different infill density values, which are the control variables in this problem. In order to achieve a desired objective stiffness, measurements are taken after each part is completed and the infill density is adjusted accordingly in a closed-loop framework. The absolute error in the stiffness at the end of printing is reduced from 11.63% to 1.34% by using a closed-loop instead of an open-loop control. This experiments serves as a proof of concept to show the relevance of using feedback control in additive manufacturing. By considering the printing process and the measurements as stochastic processes, we show how stochastic optimal control and Kalman filtering can be used to improve the quality of objects manufactured with rudimentary printers. △ Less

Submitted 7 May, 2018; originally announced May 2018.

Comments: Accepted to CCTA 2018 conference