Showing 1–15 of 15 results for author: Ganti, R

Study on Downlink CSI compression: Are Neural Networks the Only Solution?

Authors: K. Sai Praneeth, Anil Kumar Yerrapragada, Achyuth Sagireddi, Sai Prasad, Radha Krishna Ganti

Abstract: Massive Multi Input Multi Output (MIMO) systems enable higher data rates in the downlink (DL) with spatial multiplexing achieved by forming narrow beams. The higher DL data rates are achieved by effective implementation of spatial multiplexing and beamforming which is subject to availability of DL channel state information (CSI) at the base station. For Frequency Division Duplexing (FDD) systems,… ▽ More Massive Multi Input Multi Output (MIMO) systems enable higher data rates in the downlink (DL) with spatial multiplexing achieved by forming narrow beams. The higher DL data rates are achieved by effective implementation of spatial multiplexing and beamforming which is subject to availability of DL channel state information (CSI) at the base station. For Frequency Division Duplexing (FDD) systems, the DL CSI has to be transmitted by User Equipment (UE) to the gNB and it constitutes a significant overhead which scales with the number of transmitter antennas and the granularity of the CSI. To address the overhead issue, AI/ML methods using auto-encoders have been investigated, where an encoder neural network model at the UE compresses the CSI and a decoder neural network model at the gNB reconstructs it. However, the use of AI/ML methods has a number of challenges related to (1) model complexity, (2) model generalization across channel scenarios and (3) inter-vendor compatibility of the two sides of the model. In this work, we investigate a more traditional dimensionality reduction method that uses Principal Component Analysis (PCA) and therefore does not suffer from the above challenges. Simulation results show that PCA based CSI compression actually achieves comparable reconstruction performance to commonly used deep neural networks based models. △ Less

Submitted 10 February, 2025; originally announced February 2025.

Physical Layer Design for Ambient IoT

Authors: Rohit Singh, Anil Kumar Yerrapragada, Radha Krishna Ganti

Abstract: There is a growing demand for ultra low power and ultra low complexity devices for applications which require maintenance-free and battery-less operation. One way to serve such applications is through backscatter devices, which communicate using energy harvested from ambient sources such as radio waves transmitted by a reader. Traditional backscatter devices, such as RFID, are limited by range, in… ▽ More There is a growing demand for ultra low power and ultra low complexity devices for applications which require maintenance-free and battery-less operation. One way to serve such applications is through backscatter devices, which communicate using energy harvested from ambient sources such as radio waves transmitted by a reader. Traditional backscatter devices, such as RFID, are limited by range, interference, low connection density, and security issues. To address these problems, the Third Generation Partnership Project (3GPP) has started working on Ambient IoT (A-IoT). For the realization of A-IoT devices, various aspects ranging from physical layer design, to the protocol stack, to the device architecture should be standardized. In this paper, we provide an overview of the standardization efforts on the physical layer design for A-IoT devices. The various physical channels and signals are discussed, followed by link level simulations to compare the performance of various configurations of reader to device and device to reader channels. △ Less

Submitted 16 January, 2025; originally announced January 2025.

Comments: 8 pages, 5 figures, 1 table

Precoder Implementation and Optimization in 5G NR Massive MIMO Radio

Authors: Kalyani Bhukya, Shahid Aamir Sheikh, Radha Krishna Ganti

Abstract: The evolution of 5G New Radio (NR) has brought significant improvements in signal strength and service quality for users. By integrating Multiple Input Multiple Output (MIMO) systems into communications, multiple data streams can be transmitted simultaneously across multiple antennas. Additionally, the incorporation of precoding in MIMO systems enables enhanced data rates and spectral efficiency.… ▽ More The evolution of 5G New Radio (NR) has brought significant improvements in signal strength and service quality for users. By integrating Multiple Input Multiple Output (MIMO) systems into communications, multiple data streams can be transmitted simultaneously across multiple antennas. Additionally, the incorporation of precoding in MIMO systems enables enhanced data rates and spectral efficiency. In wireless networks, precoders are used to steer high-gain beams intended for specific users. This paper focuses on the implementation of 16, 32, and 64 channel linear precoders in the Remote Radio Head (RRH) of the indigenously developed 5G testbed at IIT Madras. These precoders include a memory module to store channel matrices and a multiplier module to perform matrix multiplications between the channel matrices and user data within a slot duration of 500 microseconds. The system demonstrates DSP utilization levels of 9.75%, 19.5%, and 39% for (16 x 8), (32 x 8), and (64 x 8) antenna-layer configurations, respectively, while maintaining Block RAM (BRAM) usage within 2.28%, 3.91%, and 7.16%. Additionally, a throughput of 1.2 Gbps with four active layers highlights the system's optimized performance under hardware constraints. △ Less

Submitted 31 December, 2024; originally announced January 2025.

Comments: There are 6 pages,7 figures and 6 tables

A Machine Learning based Hybrid Receiver for 5G NR PRACH

Authors: Rohit Singh, Anil Kumar Yerrapragada, Radha Krishna Ganti

Abstract: Random Access is a critical procedure using which a User Equipment (UE) identifies itself to a Base Station (BS). Random Access starts with the UE transmitting a random preamble on the Physical Random Access Channel (PRACH). In a conventional BS receiver, the UE's specific preamble is identified by correlation with all the possible preambles. The PRACH signal is also used to estimate the timing ad… ▽ More Random Access is a critical procedure using which a User Equipment (UE) identifies itself to a Base Station (BS). Random Access starts with the UE transmitting a random preamble on the Physical Random Access Channel (PRACH). In a conventional BS receiver, the UE's specific preamble is identified by correlation with all the possible preambles. The PRACH signal is also used to estimate the timing advance which is induced by propagation delay. Correlation-based receivers suffer from false peaks and missed detection in scenarios dominated by high fading and low signal-to-noise ratio. This paper describes the design of a hybrid receiver that consists of an AI/ML model for preamble detection followed by conventional peak detection for the Timing Advance estimation. The proposed receiver combines the Power Delay Profiles of correlation windows across multiple antennas and uses the combination as input to a Neural Network model. The model predicts the presence or absence of a user in a particular preamble window, after which the timing advance is estimated by peak detection. Results show superior performance of the hybrid receiver compared to conventional receivers both for simulated and real hardware-captured datasets. △ Less

Submitted 3 November, 2024; originally announced November 2024.

Comments: 6 pages, 9 figures

On the Application of Deep Learning for Precise Indoor Positioning in 6G

Authors: Sai Prasanth Kotturi, Anil Kumar Yerrapragada, Sai Prasad, Radha Krishna Ganti

Abstract: Accurate localization in indoor environments is a challenge due to the Non Line of Sight (NLoS) nature of the signaling. In this paper, we explore the use of AI/ML techniques for positioning accuracy enhancement in Indoor Factory (InF) scenarios. The proposed neural network, which we term LocNet, is trained on measurements such as Channel Impulse Response (CIR) and Reference Signal Received Power… ▽ More Accurate localization in indoor environments is a challenge due to the Non Line of Sight (NLoS) nature of the signaling. In this paper, we explore the use of AI/ML techniques for positioning accuracy enhancement in Indoor Factory (InF) scenarios. The proposed neural network, which we term LocNet, is trained on measurements such as Channel Impulse Response (CIR) and Reference Signal Received Power (RSRP) from multiple Transmit Receive Points (TRPs). Simulation results show that when using measurements from 18 TRPs, LocNet achieves a 9 cm positioning accuracy at the 90th percentile. Additionally, we demonstrate that the same model generalizes effectively even when measurements from some TRPs randomly become unavailable. Lastly, we provide insights on the robustness of the trained model to the errors in ground truth labels used for training. △ Less

Submitted 25 October, 2024; originally announced October 2024.

Comments: 6 Pages, 6 Figures

Near-Pilotless MIMO Single Carrier Communications using Matrix Decomposition

Authors: Sai Praneeth K, P Aswathylakshmi, Radhakrishna Ganti

Abstract: Multiple Input-Multiple Output (MIMO) is a key enabler of higher data rates in the next generation wireless communications. However in MIMO systems, channel estimation and equalization are challenging particularly in the presence of rapidly changing channels. The high pilot overhead required for channel estimation can reduce the system throughput for large antenna configuration. In this paper, we… ▽ More Multiple Input-Multiple Output (MIMO) is a key enabler of higher data rates in the next generation wireless communications. However in MIMO systems, channel estimation and equalization are challenging particularly in the presence of rapidly changing channels. The high pilot overhead required for channel estimation can reduce the system throughput for large antenna configuration. In this paper, we provide an iterative matrix decomposition algorithm for near-pilotless or blind decoding of MIMO signals, in a single carrier system with frequency domain equalization. This novel approach replaces the standard equalization and estimates both the transmitted data and the channel without the knowledge of any prior distributions, by making use of only one pilot. Our simulations demonstrate improved performance, in terms of error rates, compared to the more widely used pilot-based Maximal Ratio Combining (MRC) method. △ Less

Submitted 14 October, 2024; originally announced October 2024.

Comments: 6 pages, 8 figures

Centimeter Positioning Accuracy using AI/ML for 6G Applications

Authors: Sai Prasanth Kotturi, Radha Krishna Ganti

Abstract: This research looks at using AI/ML to achieve centimeter-level user positioning in 6G applications such as the Industrial Internet of Things (IIoT). Initial results show that our AI/ML-based method can estimate user positions with an accuracy of 17 cm in an indoor factory environment. In this proposal, we highlight our approaches and future directions. This research looks at using AI/ML to achieve centimeter-level user positioning in 6G applications such as the Industrial Internet of Things (IIoT). Initial results show that our AI/ML-based method can estimate user positions with an accuracy of 17 cm in an indoor factory environment. In this proposal, we highlight our approaches and future directions. △ Less

Submitted 20 June, 2024; originally announced June 2024.

Comments: 2 Pages, 2 Figures, ICMLCN Conference, Stockholm, Sweden

UCINet0: A Machine Learning based Receiver for 5G NR PUCCH Format 0

Authors: Anil Kumar Yerrapragada, Jeeva Keshav Sattianarayanin, Radha Krishna Ganti

Abstract: Accurate decoding of Uplink Control Information (UCI) on the Physical Uplink Control Channel (PUCCH) is essential for enabling 5G wireless links. This paper explores an AI/ML-based receiver design for PUCCH Format 0. Format 0 signaling encodes the UCI content within the phase of a known base waveform and even supports multiplexing of up to 12 users within the same time-frequency resources. Our fir… ▽ More Accurate decoding of Uplink Control Information (UCI) on the Physical Uplink Control Channel (PUCCH) is essential for enabling 5G wireless links. This paper explores an AI/ML-based receiver design for PUCCH Format 0. Format 0 signaling encodes the UCI content within the phase of a known base waveform and even supports multiplexing of up to 12 users within the same time-frequency resources. Our first-of-a-kind neural network classifier, which we term UCINet0, is capable of predicting when no user is transmitting on the PUCCH, as well as decoding the UCI content of any number of multiplexed users, up to 12. Inference results with both simulated and hardware-captured field datasets show that the UCINet0 model outperforms conventional DFT-based decoders across all SNR ranges. △ Less

Submitted 10 March, 2024; originally announced April 2024.

Optimum Beamforming and Grating Lobe Mitigation for Intelligent Reflecting Surfaces

Authors: Sai Sanjay Narayanan, Uday K Khankhoje, Radha Krishna Ganti

Abstract: Ensuring adequate wireless coverage in upcoming communication technologies such as 6G is expected to be challenging. This is because user demands of higher datarate require an increase in carrier frequencies, which in turn reduce the diffraction effects (and hence coverage) in complex multipath environments. Intelligent reflecting surfaces have been proposed as a way of restoring coverage by adapt… ▽ More Ensuring adequate wireless coverage in upcoming communication technologies such as 6G is expected to be challenging. This is because user demands of higher datarate require an increase in carrier frequencies, which in turn reduce the diffraction effects (and hence coverage) in complex multipath environments. Intelligent reflecting surfaces have been proposed as a way of restoring coverage by adaptively reflecting incoming electromagnetic waves in desired directions. This is accomplished by judiciously adding extra phases at different points on the surface. In practice, these extra phases are only available in discrete quantities due to hardware constraints. Computing these extra phases is computationally challenging when they can only be picked from a discrete distribution, and existing approaches for solving this problem were either heuristic or based on evolutionary algorithms. We solve this problem by proposing fast algorithms with provably optimal solutions. Our algorithms have linear complexity, and are presented with rigorous proofs for their optimality. We show that the proposed algorithms exhibit better performance. We analyze situations when unwanted grating lobes arise in the radiation pattern, and discuss mitigation strategies, such as the use of triangular lattices and prephasing techniques, to eliminate them. We also demonstrate how our algorithms can leverage these techniques to deliver optimum beamforming solutions. △ Less

Submitted 30 August, 2024; v1 submitted 14 April, 2024; originally announced April 2024.

Comments: 12 pages, 16 figures

Enhancements for 5G NR PRACH Reception: An AI/ML Approach

Authors: Rohit Singh, Anil Kumar Yerrapragada, Jeeva Keshav S, Radha Krishna Ganti

Abstract: Random Access is an important step in enabling the initial attachment of a User Equipment (UE) to a Base Station (gNB). The UE identifies itself by embedding a Preamble Index (RAPID) in the phase rotation of a known base sequence, which it transmits on the Physical Random Access Channel (PRACH). The signal on the PRACH also enables the estimation of propagation delay, often known as Timing Advance… ▽ More Random Access is an important step in enabling the initial attachment of a User Equipment (UE) to a Base Station (gNB). The UE identifies itself by embedding a Preamble Index (RAPID) in the phase rotation of a known base sequence, which it transmits on the Physical Random Access Channel (PRACH). The signal on the PRACH also enables the estimation of propagation delay, often known as Timing Advance (TA), which is induced by virtue of the UE's position. Traditional receivers estimate the RAPID and TA using correlation-based techniques. This paper presents an alternative receiver approach that uses AI/ML models, wherein two neural networks are proposed, one for the RAPID and one for the TA. Different from other works, these two models can run in parallel as opposed to sequentially. Experiments with both simulated data and over-the-air hardware captures highlight the improved performance of the proposed AI/ML-based techniques compared to conventional correlation methods. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Pilotless Uplink for Massive MIMO Systems

Authors: P Aswathylakshmi, Radha Krishna Ganti

Abstract: Massive MIMO OFDM waveforms help support a large number of users in the same time-frequency resource and also provide significant array gain for uplink reception in cellular systems. However, channel estimation in such large antenna systems can be tricky as pilot assignment for multiple users becomes more challenging with increasing number of users. Additionally, the pilot overhead especially for… ▽ More Massive MIMO OFDM waveforms help support a large number of users in the same time-frequency resource and also provide significant array gain for uplink reception in cellular systems. However, channel estimation in such large antenna systems can be tricky as pilot assignment for multiple users becomes more challenging with increasing number of users. Additionally, the pilot overhead especially for wideband rapidly changing channels can diminish the system throughput quite significantly. In this paper, we propose an iterative matrix decomposition algorithm for the blind demodulation of massive MIMO OFDM signals without using any pilots. This new decomposition technique provides estimates of both the user symbols and the user channel in the frequency domain simultaneously (to a scaling factor) without any pilots. We discuss methods for finding the appropriate initial points for the algorithm that ensure its convergence in different types of wireless channels. We also propose new methods for resolving the scaling factor in the estimated signal that do not increase pilot overhead. We show how the method can be adapted to both single-user and multi-user systems. Simulation results demonstrate that the lack of pilots does not affect the error performance of the proposed algorithm when compared to the conventional pilot-based channel estimation and equalization methods across a wide range of channels for both single and multi-user cases. We also demonstrate techniques to reduce the complexity of the estimation algorithm over multiple OFDM symbols in a 5G MIMO system by leveraging the temporal correlations in the channel. △ Less

Submitted 3 June, 2024; v1 submitted 21 May, 2023; originally announced May 2023.

Comments: 21 pages, 23 figures, submitted to IEEE Transactions on Wireless Communications, preliminary version published in the Proceedings of the 2023 IEEE Global Communications Conference (Globecom)

Journal ref: Proceedings of the 2023 IEEE Global Communications Conference, 4205-4210

MAQA: A Multimodal QA Benchmark for Negation

Authors: Judith Yue Li, Aren Jansen, Qingqing Huang, Joonseok Lee, Ravi Ganti, Dima Kuzmin

Abstract: Multimodal learning can benefit from the representation power of pretrained Large Language Models (LLMs). However, state-of-the-art transformer based LLMs often ignore negations in natural language and there is no existing benchmark to quantitatively evaluate whether multimodal transformers inherit this weakness. In this study, we present a new multimodal question answering (QA) benchmark adapted… ▽ More Multimodal learning can benefit from the representation power of pretrained Large Language Models (LLMs). However, state-of-the-art transformer based LLMs often ignore negations in natural language and there is no existing benchmark to quantitatively evaluate whether multimodal transformers inherit this weakness. In this study, we present a new multimodal question answering (QA) benchmark adapted from labeled music videos in AudioSet (Gemmeke et al., 2017) with the goal of systematically evaluating if multimodal transformers can perform complex reasoning to recognize new concepts as negation of previously learned concepts. We show that with standard fine-tuning approach multimodal transformers are still incapable of correctly interpreting negation irrespective of model size. However, our experiments demonstrate that augmenting the original training task distributions with negated QA examples allow the model to reliably reason with negation. To do this, we describe a novel data generation procedure that prompts the 540B-parameter PaLM model to automatically generate negated QA examples as compositions of easily accessible video tags. The generated examples contain more natural linguistic patterns and the gains compared to template-based task augmentation approach are significant. △ Less

Submitted 9 January, 2023; originally announced January 2023.

Comments: NeurIPS 2022 SyntheticData4ML Workshop

MuLan: A Joint Embedding of Music Audio and Natural Language

Authors: Qingqing Huang, Aren Jansen, Joonseok Lee, Ravi Ganti, Judith Yue Li, Daniel P. W. Ellis

Abstract: Music tagging and content-based retrieval systems have traditionally been constructed using pre-defined ontologies covering a rigid set of music attributes or text queries. This paper presents MuLan: a first attempt at a new generation of acoustic models that link music audio directly to unconstrained natural language music descriptions. MuLan takes the form of a two-tower, joint audio-text embedd… ▽ More Music tagging and content-based retrieval systems have traditionally been constructed using pre-defined ontologies covering a rigid set of music attributes or text queries. This paper presents MuLan: a first attempt at a new generation of acoustic models that link music audio directly to unconstrained natural language music descriptions. MuLan takes the form of a two-tower, joint audio-text embedding model trained using 44 million music recordings (370K hours) and weakly-associated, free-form text annotations. Through its compatibility with a wide range of music genres and text styles (including conventional music tags), the resulting audio-text representation subsumes existing ontologies while graduating to true zero-shot functionalities. We demonstrate the versatility of the MuLan embeddings with a range of experiments including transfer learning, zero-shot music tagging, language understanding in the music domain, and cross-modal retrieval applications. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: To appear in ISMIR 2022

Fronthaul Compression for Uplink Massive MIMO using Matrix Decomposition

Authors: Aswathylakshmi P, Radha Krishna Ganti

Abstract: Massive MIMO opens up attractive possibilities for next generation wireless systems with its large number of antennas offering spatial diversity and multiplexing gain. However, the fronthaul link that connects a massive MIMO Remote Radio Head (RRH) and carries IQ samples to the Baseband Unit (BBU) of the base station can throttle the network capacity/speed if appropriate data compression technique… ▽ More Massive MIMO opens up attractive possibilities for next generation wireless systems with its large number of antennas offering spatial diversity and multiplexing gain. However, the fronthaul link that connects a massive MIMO Remote Radio Head (RRH) and carries IQ samples to the Baseband Unit (BBU) of the base station can throttle the network capacity/speed if appropriate data compression techniques are not applied. In this paper, we propose an iterative technique for fronthaul load reduction in the uplink for massive MIMO systems that utilizes the convolution structure of the received signals. We use an alternating minimisation algorithm for blind deconvolution of the received data matrix that provides compression ratios of 30-50. In addition, the technique presented here can be used for blind decoding of OFDM signals in massive MIMO systems. △ Less

Submitted 24 October, 2021; originally announced October 2021.

Comments: 7 pages, 3 figures

Journal ref: Proceedings of the 2022 IEEE Wireless Communications and Networking Conference (WCNC), 2524-2529

QR Approximation for Massive MIMO Fronthaul Compression

Authors: Aswathylakshmi P, Radha Krishna Ganti

Abstract: Massive MIMO's immense potential to serve large number of users at fast data rates also comes with the caveat of requiring tremendous processing power. This favours a centralized radio access network (C-RAN) architecture that concentrates the processing power at a common baseband unit (BBU) connected to multiple remote radio heads (RRH) via fronthaul links. The high bandwidths of 5G make the front… ▽ More Massive MIMO's immense potential to serve large number of users at fast data rates also comes with the caveat of requiring tremendous processing power. This favours a centralized radio access network (C-RAN) architecture that concentrates the processing power at a common baseband unit (BBU) connected to multiple remote radio heads (RRH) via fronthaul links. The high bandwidths of 5G make the fronthaul data rate a major bottleneck. Since the number of active users in a massive MIMO system is much smaller than the number of antennas, we propose a dimension reduction scheme based on low rank approximation for fronthaul data compression. Link level simulations show that the proposed method achieves more than 17x compression while also improving the error performance of the system through denoising. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Journal ref: Proceedings of the 2019 IEEE Globecom Workshops, 1-7