-
Compensation of Phase Noise in Massive-MIMO Uplink Communications Based on Expectation-Maximization Algorithm
Authors:
Alberto Tarable,
Francisco J. Escribano
Abstract:
Phase noise (PN) is a major disturbance in MIMO systems, where the contribution of different oscillators at the transmitter and the receiver side may degrade the overall performance and offset the gains offered by MIMO techniques. This is even more crucial in the case of massive MIMO, since the number of PN sources may increase considerably. In this work, we propose an iterative receiver based on…
▽ More
Phase noise (PN) is a major disturbance in MIMO systems, where the contribution of different oscillators at the transmitter and the receiver side may degrade the overall performance and offset the gains offered by MIMO techniques. This is even more crucial in the case of massive MIMO, since the number of PN sources may increase considerably. In this work, we propose an iterative receiver based on the application of the expectation-maximization algorithm. We consider a massive MIMO framework with a general association of oscillators to antennas, and include other channel disturbances like imperfect channel state information and Rician block fading. At each receiver iteration, given the information on the transmitted symbols, steepest descent is used to estimate the PN samples, with an optimized adaptive step size and a threshold-based stopping rule. The results obtained for several test cases show how the bit error rate and mean square error can benefit from the proposed phase-detection algorithm, even to the point of reaching the same performance as in the case where no PN is present, offering better results than a state-of-the-art alternative. Further analysis of the results allow to draw some useful trade-offs respecting final performance and consumption of resources.
△ Less
Submitted 12 May, 2024; v1 submitted 17 July, 2022;
originally announced July 2022.
-
Denoising Atmospheric Temperature Measurements Taken by the Mars Science Laboratory on the Martian Surface
Authors:
S. Zurita-Zurita,
Francisco J. Escribano,
J. Sáez-Landete,
J. A. Rodríguez-Manfredi
Abstract:
In the present article we analyze data from two temperature sensors of the Mars Science Laboratory, which has been active in Mars since August 2012. Temperature measurements received from the rover are noisy and must be processed and validated before being delivered to the scientific community. Currently, a simple Moving Average (MA) filter is used to perform signal denoising. The application of t…
▽ More
In the present article we analyze data from two temperature sensors of the Mars Science Laboratory, which has been active in Mars since August 2012. Temperature measurements received from the rover are noisy and must be processed and validated before being delivered to the scientific community. Currently, a simple Moving Average (MA) filter is used to perform signal denoising. The application of this basic method relies on the assumption that the noise is stationary and statistically independent from the underlying structure of the signal, an arguable assumption in this kind of harsh environment. In this paper, we analyze the application of two alternative methods to process the temperature sensor measurements: the Discrete Wavelet Transform (DWT) and the Hilbert-Huang Transform (HHT). We consider two different datasets, one belonging to the current Martian measurement campaigns, and the other to the Thermal Vacuum Tests. The processing of these datasets allows to separate the random noise from the interference created by other systems. The experiments show that the MA filter may provide useful results under given circumstances. However, the proposed methods allow a better fitting for all the realistic scenarios, while providing the possibility to identify and analyze other interesting signal features and artifacts that could be later studied and classified. The large amount of data to be processed makes computational efficiency an important requirement in this mission. Considering the computational cost and the filtering performance, we propose the method based on DWT as more suitable for this application.
△ Less
Submitted 3 November, 2020; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Optimization of Chaos-based Coded Modulations for Compensation of Amplifier Nonlinearities
Authors:
Francisco J. Escribano,
José Sáez-Landete,
Alexandre Wagemakers
Abstract:
In this work we expand the possibilities of a known class of chaos-based coded modulation (CCM) systems to address the problem of high-power amplifier (HPA) nonlinearity. The hypothesis is that the CCM nonlinear nature can be exploited to counteract its effects on the system performance, avoiding the need of a predistorter. We propose an optimization method for the design of the CCM to prove this…
▽ More
In this work we expand the possibilities of a known class of chaos-based coded modulation (CCM) systems to address the problem of high-power amplifier (HPA) nonlinearity. The hypothesis is that the CCM nonlinear nature can be exploited to counteract its effects on the system performance, avoiding the need of a predistorter. We propose an optimization method for the design of the CCM to prove this hypothesis. The results show that, for a given back-off level, a nonlinear mapping function for the chaos-based encoder and decoder can be designed to compensate the HPA effect on the error rate.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Chaos-Based Multicarrier VLC Modulator With Compensation of LED Nonlinearity
Authors:
Francisco J. Escribano,
José Sáez-Landete,
Alexandre Wagemakers
Abstract:
The massive deployment of light-emitting diode (LED) lightning infrastructure has opened the opportunity to reuse it as visible light communication (VLC) to leverage the current RF spectrum crisis in indoor scenarios. One of the main problems in VLC is the limited dynamic range of LEDs and their nonlinear response, which may lead to a severe degradation in the communication, and more specifically…
▽ More
The massive deployment of light-emitting diode (LED) lightning infrastructure has opened the opportunity to reuse it as visible light communication (VLC) to leverage the current RF spectrum crisis in indoor scenarios. One of the main problems in VLC is the limited dynamic range of LEDs and their nonlinear response, which may lead to a severe degradation in the communication, and more specifically in the bit error rate (BER). This is aggravated by the extensive usage of multicarrier multiplexing, based on optical orthogonal frequency division multiplexing (O-OFDM), characterized by a high peak-to-average power ratio. Here, we present a chaos-based coded modulation (CCM) setup specifically adapted to the LED nonlinearities. It replaces the usual modulation, while keeping the multicarrier O-OFDM structure unchanged. First, we obtain a semi-analytical bound for the bit error probability, taking into account the LED nonlinear response. The bound results particularly tight for the range of signal-to-noise ratio of interest. Then, we propose a method to design the modulator based on optimization techniques. The objective function is the semi-analytical bound, and the optimization is applied to a parameterization of the CCM conjugation function. This appropriately shapes the chaotic waveform and leads to BER improvements that outperform classical counterparts under ideal predistortion.
△ Less
Submitted 17 April, 2020; v1 submitted 16 April, 2020;
originally announced April 2020.
-
A Spatial Time-Frequency Hopping Index Modulated Scheme in Turbulence-free Optical Wireless Communication Channels
Authors:
Francisco J. Escribano,
Alexandre Wagemakers,
Georges Kaddoum,
Joao V. C. Evangelista
Abstract:
In this article, we propose an index modulation system suitable for optical communications, where the intensity of the light is modulated along the time, space and frequency dimensions, building a Frequency-Hopping Spatial Multi-Pulse Position Modulation (FH-SMPPM). We analyze its performance from the point of view of its efficiency in power and spectrum, and its implementation complexity and requ…
▽ More
In this article, we propose an index modulation system suitable for optical communications, where the intensity of the light is modulated along the time, space and frequency dimensions, building a Frequency-Hopping Spatial Multi-Pulse Position Modulation (FH-SMPPM). We analyze its performance from the point of view of its efficiency in power and spectrum, and its implementation complexity and required receiver latency. We analyze its error probability in the case of the non-turbulent free-space optical (FSO) channel. We derive formulas for the average symbol and bit error probabilities, and the simulation results show that they are tight enough for a wide range of signal-to-noise ratios and system parameters. We compare FH-SMPPM with other proposed index modulated systems of the same nature, and we highlight its distinctive advantages, like the flexibility to build an appropriate waveform under different constraints and objectives. Moreover, FH-SMPPM shows to be better performing in BER/SER and/or offer advantages in efficiency with respect to those alternatives, thus offering the possibility to be adopted for a variety of contexts.
△ Less
Submitted 20 April, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
Adaptive Multi-Receiver Coded Slotted ALOHA for Indoor Optical Wireless Communications
Authors:
Dejan Vukobratovic,
Francisco J. Escribano
Abstract:
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation dec…
▽ More
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation decoder that may exploit both spatial and temporal diversity. By applying adaptive control of each OWC AP field of view (FOV), the proposed system is able to dynamically adapt to different IoT device activation rates, in order to maintain a high total throughput. Using illustrative simulation results, we demonstrate the design methodology and performance possibilities of the proposed method.
△ Less
Submitted 17 April, 2020; v1 submitted 24 February, 2020;
originally announced February 2020.
-
Performance Analysis of QAM-MPPM in Turbulence-Free FSO Channels: Accurate Derivations and Practical Approximations
Authors:
Francisco J. Escribano,
Alexandre Wagemakers
Abstract:
Following the trends of index modulated (IM) techniques for optical communications, in the last few years several new waveform proposals have been made, aiming at conveying a higher density of information by driving different signal properties. One of these proposals mixes multi-pulse pulse-position modulation (MPPM) and quadrature amplitude modulation (QAM) in a system called QAM-MPPM. We present…
▽ More
Following the trends of index modulated (IM) techniques for optical communications, in the last few years several new waveform proposals have been made, aiming at conveying a higher density of information by driving different signal properties. One of these proposals mixes multi-pulse pulse-position modulation (MPPM) and quadrature amplitude modulation (QAM) in a system called QAM-MPPM. We present here a new way to demodulate its compound waveform, and, for the non-turbulent free space optical (FSO) channel, we provide accurate analytical expressions for its error probabilities, both in the case of the traditional and the new detector. Based on these analytical derivations, we also provide simplified expressions for the estimation of the error probabilities. We show that the new detector offers a gain of some tenths of dB in signal-to-noise ratio with respect to the previously defined one without an increase in complexity, and that our error probability estimations are more accurate than previously published results. To the best of our knowledge, this work is the first to provide simulation results validating the study of the error probability performance of QAM-MPPM.
△ Less
Submitted 6 April, 2020; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Design and Performance Analysis of an Index Time Frequency Modulation Scheme for Optical Communications
Authors:
Francisco J. Escribano,
Alexandre Wagemakers,
Georges Kaddoum,
Joao V. C. Evangelista
Abstract:
In this article, we propose an index modulation system suitable for optical communications, based on jointly driving the time and frequency of the signal: an index-time frequency hopping (I-TFH) system. We analyze its performance from the point of view of its efficiency in power and spectrum, and its behavior in terms of error probability for the non-turbulent free-space optical (FSO) channel. We…
▽ More
In this article, we propose an index modulation system suitable for optical communications, based on jointly driving the time and frequency of the signal: an index-time frequency hopping (I-TFH) system. We analyze its performance from the point of view of its efficiency in power and spectrum, and its behavior in terms of error probability for the non-turbulent free-space optical (FSO) channel. We compare I-TFH with already proposed index modulated systems of the same nature, but where the amplitude or the number of transmitters are driven instead of the signal frequency. We derive and compare approximations for the average symbol and bit error probabilities of all these systems. The simulation results show that said approximations are tight enough for a wide range of signal-to-noise ratios and system parameters. Moreover, I-TFH shows to be better performing in BER and/or power efficiency than the comparative alternatives, and may offer interesting properties in a variety of contexts.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Chaos-Based Anytime Reliable Coded Communications
Authors:
Alberto Tarable,
Francisco J. Escribano
Abstract:
Anytime reliable communication systems are needed in contexts where the property of vanishing error probability with time is critical. This is the case of unstable real time systems that are to be controlled through the transmission and processing of remotely sensed data. The most successful anytime reliable transmission systems developed so far are based on channel codes and channel coding theory…
▽ More
Anytime reliable communication systems are needed in contexts where the property of vanishing error probability with time is critical. This is the case of unstable real time systems that are to be controlled through the transmission and processing of remotely sensed data. The most successful anytime reliable transmission systems developed so far are based on channel codes and channel coding theory. In this work, another focus is proposed, placing the stress on the waveform level rather than just on the coding level. This alleviates the coding and decoding complexity problems faced by other proposals. To this purpose, chaos theory is successfully exploited in order to design two different anytime reliable alternatives. The anytime reliability property is formally demonstrated in each case for the AWGN channel, under given conditions. The simulation results shown validate the theoretical developments, and demonstrate that these systems can achieve anytime reliability with affordable resource expenditure.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
