-
Automated Driving Architecture and Operation of a Light Commercial Vehicle
Authors:
Murat Gozu,
Mumin Tolga Emirler,
Ismail Meric Can Uygan,
Tevfik Ali Boke,
Levent Guvenc,
Bilin Aksun-Guvenc
Abstract:
This paper is on the automated driving architecture and operation of a light commercial vehicle. Simple longitudinal and lateral dynamic models of the vehicle and a more detailed CarSim model are developed and used in simulations and controller design and evaluation. Experimental validation is used to make sure that the models used represent the actual response of the vehicle as closely as possibl…
▽ More
This paper is on the automated driving architecture and operation of a light commercial vehicle. Simple longitudinal and lateral dynamic models of the vehicle and a more detailed CarSim model are developed and used in simulations and controller design and evaluation. Experimental validation is used to make sure that the models used represent the actual response of the vehicle as closely as possible. The vehicle is made drive-by-wire by interfacing with the existing throttle-by-wire, by adding an active vacuum booster for brake-by-wire and by adding a steering actuator for steer-by-wire operation. Vehicle localization is achieved by using a GPS sensor integrated with six axes IMU with a built-in INS algorithm and a digital compass for heading information. Front looking radar, lidar and camera are used for environmental sensing. Communication with the road infrastructure and other vehicles is made possible by a vehicle to vehicle communication modem. A dedicated computer under real time Linux is used to collect, process and distribute sensor information. A dSPACE MicroAutoBox is used for drive-by-wire controls. CACC based longitudinal control and path tracking of a map of GPS waypoints are used to present the operation of this automated driving vehicle.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Model Predictive Vehicle Yaw Stability Control via Integrated Active Front Wheel Steering and Individual Braking
Authors:
Mumin Tolga Emirler,
Bilin Aksun Guvenc
Abstract:
Vehicle stability control systems are important components of active safety systems for road transport. The problem of vehicle lateral stability control is addressed in this paper using active front wheel steering and individual braking. Vehicle lateral stability control means keeping the vehicle yaw rate and the vehicle side slip angle in desired values. For this reason, a model-based controller…
▽ More
Vehicle stability control systems are important components of active safety systems for road transport. The problem of vehicle lateral stability control is addressed in this paper using active front wheel steering and individual braking. Vehicle lateral stability control means keeping the vehicle yaw rate and the vehicle side slip angle in desired values. For this reason, a model-based controller is designed. The desired yaw rate is obtained from the single track vehicle model and the desired side slip angle is chosen as zero. Controller design consists of two parts, lower and upper controller parts. Upper controller is designed based on Model Predictive Control (MPC) method. This upper controller changes front wheel steering angles utilizing steer-by-wire system and also it generates the required control moment for stabilizing the yaw motion of the vehicle. Lower controller is an individual braking algorithm. It determines the individual braking wheel. In this way, the control moment can be applied to the vehicle. The designed controller is tested using the nonlinear single track vehicle model and the higher fidelity CarMaker vehicle model.
△ Less
Submitted 18 October, 2022;
originally announced October 2022.
-
Yaw Stability Control System Development and Implementation for a Fully Electric Vehicle
Authors:
Kerim Kahraman,
Mutlu Senturk,
Mumin Tolga Emirler,
Ismail Meric Can Uygan,
Bilin Aksun-Guvenc,
Levent Guvenc,
Baris Efendioglu
Abstract:
There is growing interest in fully electric vehicles in the automotive industry as it becomes increasingly more difficult to meet new and upcoming emission regulations based on internal combustion engines. Fully electric vehicles do not have an internal combustion engine. Hence, drive torque change for a traction control system and for a yaw stability control system has to be through the electric…
▽ More
There is growing interest in fully electric vehicles in the automotive industry as it becomes increasingly more difficult to meet new and upcoming emission regulations based on internal combustion engines. Fully electric vehicles do not have an internal combustion engine. Hence, drive torque change for a traction control system and for a yaw stability control system has to be through the electric motor used for traction. The regenerative braking capability of fully electric vehicles has to be taken into account in designing braking controllers like ABS and yaw stability control through differential braking. Fully electric vehicles are usually lighter vehicles with different dynamic characteristics than that of their predecessors using internal combustion engines. As such, their yaw stability control systems have to be re-designed and tested. This paper reports the initial results of ongoing work on yaw stability controller design for a fully electric vehicle. Two different implementations on a research prototype fully electric light commercial vehicle are considered. The first implementation uses the production yaw stability control system in the internal combustion engine powered conventional vehicle. The drive torque change commands from the production ECU are read, modified and sent to the electric motor driver in trying to mimic the conventional vehicle. The differential braking commands are the same as in the conventional vehicle. In the second implementation, a generic yaw stability control system that calculates and issues its own drive torque change commands and differential braking commands is designed and implemented. Offline simulations on a validated model and a hardware-in-the-loop simulation system are used in designing the yaw stability control system.
△ Less
Submitted 4 March, 2022; v1 submitted 8 December, 2020;
originally announced December 2020.
